The addressbook allows you to add usernames and assign categories to + them, which can then be used in other places such as the Usercolor settings + or the Highlight settings. + Categories cannot contain spaces and are all made lowercase when added/loaded from file.
+ +The addressbook can be edited in several ways:
+<Main Menu> - Channels - Addressbook)
+ where all entries are listed and you can add/edit/remove entries.Addressbook)
+ where the entry for this user can be directly added/edited/removed. There
+ you can just select/unselect the categories this user should be in
+ (although only the categories that are already used in the addressbook
+ are listed, so if you want to add a completely
+ new category, you have to add it once by manually editing an entry).In addition to the addressbook dialog and user context menu, there are also some commands to
+ edit the addressbook. All commands are prefixed with /ab
+ (e.g. /ab add <name>) or alternatively /users (e.g. /users add <name>):
add <name> - Adds a nameadd <name> <categories> - Adds a name and directly assigns it the given categories, or adds the
+ categories to the name if it already exists (categories are comma-seperated, without spaces)set <name> <categories> - Sets the categories for this name, adding it if necessary, replacing
+ any present categories for this nameremove <name> - Completely removes the given nameremove <name> <categories> - Removes the given categories from this name, but leaves
+ the namechange <name> <categoriesModification> - Prepend categories with +,
+ - or ! to add, remove or toggle the categories respectively. You can specify more than
+ one set of categories, for example: change test +a,b -c !d adds a and b, removes c and toggles dget <name> - Shows the categories for this nameinfo - Shows number of entries and used categoriesCategories are given as a comma-seperated list without spaces, e.g. cat1,cat2,cat3.
The following commands edit all entries at once, so they should be used with care:
+renameCategory <currentName> <newName> - Renames a category, which means all occurences
+ of currentName are replaced with newName in all entries. This can also
+ be used to merge categories, if newName already exists.removeCategory <name> - Removes the category with the given name from all entries/ab add josh vipvip to the user called joshjosh's categories would now be: vip)/ab set josh rainbowjosh to rainbow, replacing
+ any previously associated categoriesjosh's categories would now be: rainbow)josh kind of colorful in chat, try it out with your own name Kappa)/ab add josh vipvip to the user joshjosh's categories would now be: rainbow,vip)/ab remove josh vipvip from the user josh,
+ keeping the other categories untouchedjosh's categories would now again be: rainbow)The following features are a bit more advanced and should only be used if + you somewhat know what you're doing.
+ + +You can use this to let the moderators of your channel edit your addressbook. + Depending on what commands you allow them to use, this can be a powerful tool, + so make sure you keep an eye on what your moderators do.
+ +The following settings affect the this feature (you have to change them + via setting commands):
+ +abCommandsChannel/clearSetting command to
+ disable the mod commands again./set abCommandsChannel #yourchannelabCommandsadd and set
+ commands, the setting value would be add,set (no spaces)./set abCommands add,setadd,set,remove.If you set the settings accordingly, then the mods will be able to use
+ e.g. !add name category to add name to your
+ Addressbook with the category category. Chatty will output
+ a message about the change, similiar to when you enter the command yourself.
+ It does not send a message to chat, so if you want your moderators to see an
+ actual response, you need to have Chatty on stream (which means the response
+ is also affected by stream delay of course).
This is a rather experimental feature, so it might not work reliably.
+ +You can write Addressbook commands (one per line) to the addressbookImport.txt
+ file in the settings directory (enter /dir to find out what
+ your settings directory is). You can use any commands specified in the Commands section above, without
+ the /ab or /users prefix (since it's already
+ implied that they are Addressbook commands). For example:
add darthclide level1 +change nightbot !vip +set testi ignore+ +
To perform an import, enter the /abImport command and Chatty
+ will read the file and execute each command as if you would have entered
+ it in the input box. Information about the
+ command results is output in the debug window (Extra - Debug window)
+ and the debug log file.
You can also set the abAutoImport setting (/set abAutoImport on)
+ and the file will be read automatically within a few seconds when it is
+ detected to have been changed. You have to restart Chatty after changing
+ the abAutoImport value for it to take effect.
+ To make sure no data is lost, you should not
+ write to the file too often, or else it may already be overwritten once
+ changes are detected and the file contents are read and the commands performed.
It will also not be read automatically when you on start of Chatty,
+ so you should only apply changes while Chatty is running or
+ use the /abImport command to manually read the file once after
+ start. If you only change the file while Chatty is running, manually reading
+ the file should not be necessary.
Example: mIRC script to edit the Addressbook.
+ + +You can add somewhat unique categories to a setting, which means that + only one user will have that category assigned, as long as you only use + Addressbook commands to apply that category (and not the context menu or + Addressbook dialog).
+ +Use /set abUniqueCats star to set the category star
+ as unique category. That way, only one user can have that category.
+ What happens is that when using an Addressbook command like
+ /ab add Jack star, it will first remove the star category
+ from all other users and then add it to Jack.
If you want to have more than one unique category, you can separate
+ several categories by comma: /set abUniqueCats star,gold
This is an experimental feature that adds Subscribers automatically to + an Addressbook category, depending on how many months they subscribed. + This works on Subscriber Notifications in chat, so you have to be in the + channel at the time of the subscription for it to work.
+First you need to do some configuration:
+/set abSubMonthsChan #<yourchannel> - Set the
+ channel you want the feature enabled for/add abSubMonths <number> - Add one or several
+ subscription lenghts in months (repeat the command with a different
+ number to add more than one)/remove abSubMonths <number> - Remove a number
+ from the listThe months represent the categories that are automatically added. For
+ example if you configured the months as [3, 6, 12]:
.. subscribed for 3 months in a row! would add that
+ user to the 3months category.. subscribed for 4 months in a row! would add that
+ user to the 3months category.. subscribed for 11 months in a row! would add that
+ user to the 6months category.. subscribed for 20 months in a row! would add that
+ user to the 12months category.. just subscribed! won't do anythingRemember that this relies on the notification message to be in a certain + format, so this may not be the most reliable thing, especially if Twitch + decides to change the message in some way.
+ + + diff --git a/help/0.8.2/help-admin.html b/help/0.8.2/help-admin.html new file mode 100644 index 0000000..e789ff0 --- /dev/null +++ b/help/0.8.2/help-admin.html @@ -0,0 +1,98 @@ + + ++ Change game/title | + Run commercials +
+ +Open the Admin Dialog via View - Channel Admin or by
+ right-clicking on the channel to open the context menu and choose
+ Channel Admin.
In the Admin Dialog you can change the title/game of your channel and
+ run commercials, if you have allowed the necessary access when getting your
+ login data. You need Editor access for changing game/title and
+ Commercial access for running commercials. See allow more access.
The Admin Dialog is always opened for the currently selected channel, + unless there is no channel open (which is the case just after you started Chatty), + in which case it will always be opened for your own channel, which is derived + from your configured account name.
+ +The Status-Tab lets you view and change the title and game of your channel.
+ The information is loaded when you open the dialog and when you press the
+ reload-Button. If others may have changed the info in the meantime,
+ you may want to reload before trying to change it.
When you select a game, another dialog will open where you should enter
+ part of the name of the game in the search field and hit Enter
+ or click the Search-Button to find the correct name, which
+ you can then select. You can also just use the name you entered yourself,
+ but you should usually use the search to make sure your stream appears in
+ the correct category on Twitch.
There are also status presets, which allow you to add a combination of
+ title and game, so you can select it later. By pressing Fav
+ on the Status-Tab, you can add the current status to the favorites.
+ The status is also automatically added to the history every time you
+ press the Update button.
Press the Presets button to open a table with the favorites
+ and status history. You can filter the table by only showing entries for
+ the game currently have selected or only showing favorites.
History entries (the ones that are not favorites) are automatically + removed after some time, you can change when they are removed and + whether they should be added in the first place in the settings.
+The Last Activity columns shows when this status was last
+ set using the Update button (or when it was added to the
+ favorites for the first time). The Usage column shows how
+ often it was set using the Update button.
If you are partnered with Twitch, you can run commercials on your channel + here (even if you are not partnered it may run a commercial). Click on the + appropriate button to try to run a commercial of the given length.
+ +The Last run time shows when a commercial was last run
+ through Chatty (this session).
There are two different ways of scheduling a commercial, either running
+ a single commerical on a delay or repeating running a commercial on a delay.
+ Select either or both options and then press a Run commercial
+ button to schedule the commercial. Press the same button again to cancel the
+ scheduled commercial. Click a button of another length to change the length
+ of the commercial while keeping it on schedule. Scheduled commercials are
+ not completely exact, they may be run a few sceonds too late.
If you have Use delay selected, then the commercial will be
+ scheduled to run after the specified time. If you have Repeat selected,
+ then - after each commercial run through Chatty - another commercial will automatically be scheduled to run again with the same delay.
+ You don't need to have Use delay selected for Repeat
+ to work, they just both use the same time as delay.
The time for the delay will be interpreted as seconds by default, but you
+ can also specify minutes. Examples: 30 (30 seconds), 5m
+ (5 minutes), 120s (2 minutes).
If you have downloaded the appropriate version of Chatty (the one with
+ "hotkey" in the .zip filename, Windows only), you can define a global hotkey
+ to run 30s commercials on the channel you currently have open. The hotkey
+ can be defined on the Commercials tab in the Admin Dialog
+ (don't forget to press Set to actually set it).
If you have the Admin Dialog open on the Commercials tab,
+ then executing the hotkey will simulate a click on the 30s button, with all
+ the implications like being able to use a delay, running the commercial on
+ the channel that the Admin Dialog was opened on (instead of the currently
+ active channel) and so on.
Chatty is tailored towards Twitch Chat and is not a general IRC client, + so using a Bouncer may not work correctly or may cause unexpected + behaviour. Nevertheless, if you want to try if it works for you, this + page should get you started.
+ +By default Chatty will connect to the server/ports that are set in the + settings, using the store OAuth token. To connect to a Bouncer you need + to change both the server and port and tell Chatty to use the Bouncer + password instead.
+ +You will need to start Chatty with some launch options. + You can create a shortcut + or .bat file for that.
+ +-server <host/ip>-port <port>-password [password]If your bouncer uses special names starting with * like
+ *status, this will open an extra Tab in Chatty. You can
+ also use the /msg command to directly write to that name
+ (e.g. /msg *perform list).
If you want to connect via SSL to your Bouncer you will have to add the
+ port you use for connecting to the list of ports that Chatty will try to
+ connect to via SSL (/add securedPorts <port>). Note
+ that the Certificate has to be trusted by Java to work (otherwise you
+ have to add it to your local Java installation yourself). This can
+ especially be an issue with self-signed Certificates.
You have to configure your Bouncer to connect to Twitch Chat. There are + probably guides out there how to configure your Bouncer. In regards to + connecting to Twitch Chat in particular you can use one of the guides + for regular IRC clients and apply it to the Bouncer.
+ +In addition to that, the Bouncer will need to send the following raw + commands after connecting to Twitch Chat, which will make it send info + like usercolors, emotes, user status and much more:
+ ++CAP REQ :twitch.tv/tags +CAP REQ :twitch.tv/commands+ +
To receive a userlist at all, you also need to send the following (even + then Twitch Chat will only send the userlist on join and then update it + via JOINs/PARTs, and under some circumstances it may not send a userlist + at all):
+ ++CAP REQ :twitch.tv/membership+ +
Note: Channel names on Twitch Chat must be all-lowercase (Chatty + will automatically change the case accordingly, but if you configure + channels to join through the Bouncer directly you have to be careful + with this).
+ +See more information on Twitch Chat. + +
This is a short guide to help you with installing Chatty and getting familiar with some of it's features.
+ +You can download Chatty from it's Website.
+ The download simply consists of a .zip-file which you should
+ extract wherever you want to have Chatty. The extracted files include a
+ Chatty.jar which you should usually be able to double-click to
+ start the program (if Java is installed properly). (See the help
+ if Chatty won't start.)
If you already have an older version of Chatty and want to update, then
+ just replace all the files with the new ones in the .zip.
+ Basicially just unzip the .zip into the same folder and overwrite
+ all files if asked (unless you have some custom icons or sounds that have the same name).
+ You can also unzip it into a new folder (just make sure you don't use the old version anymore).
Your settings are saved seperately in the settings directory
+ and are not lost when you upgrade to a new version. The new version should normally
+ automatically use the same settings without you needing to change anything.
+ If you are interested in what your settings directory is,
+ enter /openDir in Chatty. There is also a backup
+ folder in there with backups of the settings.
Please check out the Release Information for any changes in a new version that + may require your attention.
+ +Note: If you downgrade to an older version of Chatty, some settings (that the older + version didn't have yet) may be lost. So make sure you don't run old versions of Chatty + without knowing what you are doing, if you have changed settings unique to newer versions.
+ +If you are starting Chatty for the first time, you will have to request + login data from Twitch so Chatty can connect to chat for you and do other + stuff like show live streams you follow.
+In the Connect-dialog, click on Create login..
+ and then Request login data and simply follow the instructions.
+ Once you successfully created the login, close the dialog until you get back
+ to the Connect-dialog. (There is a Guide on what to do
+ when getting login data fails.)
In the Connect-dialog enter the name of the channel you want
+ to join in the Channel: input box. The name of the channel
+ is the same as the name of the stream. You can enter more than one channel
+ name to join by seperating them with a comma. To connect simply press Enter
+ or click on Connect. After connecting, it will automatically join
+ the channels you specified.
Even after connecting you can join additional channels via Channels - Join Channel
+ or entering the command /join <channelname> in the inputbox
+ (e.g. /join joshimuz).
You can leave channels by right-clicking anywhere in the channel and
+ selecting Close Channel from the context menu or right-clicking
+ on the channel's tab (only available if there is more than one channel) and
+ selecting Close from the context menu.
Chatting is pretty straightfoward as you would expect from any chat program, + however the inputbox has a few useful features. Enter the beginning of a name + in chat and press TAB to auto-complete the name. + Press Up-Arrow key to go back to previous stuff you entered.
+ +To moderate a chat, you can of course use the regular moderations commands
+ like /ban, /timeout and so on, but a much more
+ convenient method is to click on the name of a user you want to ban/timeout,
+ which opens the User-dialog, containing several moderation
+ buttons as well as the recent messages of that user, so you can quickly check
+ if you are actually timing out the correct user.
Also check out the options to pause chat + and timing out users via shortcuts only.
+ +
Chatty regulary requests information about the current stream, which is
+ displayed in the titlebar and the Channel Info-dialog.
You can open the Channel Info via the View-menu
+ or the channel context menu (right-click anywhere on the channel). The
+ Channel Info contains the current title/game but also a history
+ of the Viewercount and previous title/games (if you hover over points).
Open the Live Channels-window via Channels - Live Channels
+ to open up a list of streams you follow that are currently live or streams
+ whose channel you have currently joined that are currently live.
(You need to have the required access with your login data to see streams + you follow.)
+ +You can enable/disable showing streams you follow in the Settings - Notifications.
+ There you can also configure what kind of Tray Notification you want to have
+ pop up for stream status changes or highlighted messages.
To join channels directly out of the Live Channels-dialog
+ right-click on a stream to open the context menu and then select Join channel
+ to join the channel for that stream and if you want also open the stream in
+ your browser or Livestreamer.
Settings
+ from the Main-menu to get all kinds of settings to adjust
+ Chatty to your preference. Please make use of the Help link
+ in the bottom left corner of the Settings-dialog to get
+ help on the current page of settings you have selected.If you want to run Chatty more than once at the same time, you may need
+ to know how it saves it's settings. By default the settings are saved
+ in your user-directory in the subfolder .chatty (where it is
+ exactly is system-dependant, enter /dir in Chatty to show it's location). When you run the program, it loads the settings
+ and when you exit the program, it saves them, overwriting the file with
+ no regard to possible changes (to the file) that may have occured in the meantime.
This means that when you run more than one instance on the same computer, + the last one you close always overwrites the settings.
+ +You can change the default settings directory by using the -cd
+ commandline paramter, which changes the settings directory to the current
+ working directory, meaning the settings are loaded and saved in the same
+ location you specified as working directory.
This means you can easily run more than one instance on the same computer + with completely different settings, just by using that commandline parameter + and specifying different working directories (e.g. in Windows in the shortcut + settings).
+See also: Create Shortcut.
+ +When you want to run several instances with different settings, but want + to use the same account, you run into problems. Everytime you request login + data (token), the old login is invalidated, so you have to share the login data + you already have between different instances.
+ +You can do this by simply copying the login settings file
+ which contains the login data. Make sure you closed the Chatty instance
+ you requested the login data with at least once, so it's actually saved
+ to the file.
You could also try to play around with symbolic links
+ to point to a shared login file.
If you want to run Chatty on different computers with the same account, + you run into the same problem as mentioned under Sharing login data: + You can't have more than one access token with the same account for the same + app at the same time.
+To use Chatty on more than one computer with the same account, you'll
+ have to transfer the login data, either by copying the login
+ file or by entering the access token manually
+ (/get token displays the token,
+ /changetoken <token> changes it).
Use this guide when the normal procedure of getting login data fails.
+ +If you open the Get login data dialog and it says it can't
+ listen to the port, first check the following:
If you can't fix this problem and there are no other error messages that + may indicate what is going wrong, then you can manually open the necessary + page (opening any of these links will invalidate any previous login + you requested for Chatty, so only do it if you really want to get a new one):
+| + | Chat | +User read | +Editor | +Commercials | +Subscribers | +
|---|---|---|---|---|---|
| Request new login | +x | ++ | + | + | + |
| Request new login | +x | +x | ++ | + | + |
| Request new login | +x | +x | +x | ++ | + |
| Request new login | +x | +x | +x | +x | ++ |
| Request new login | +x | +x | +x | +x | +x | +
Since the webserver in Chatty won't run if you got any of the aforementioned
+ errors, your browser will tell you it can't load the page when you get to
+ http://127.0.0.1:61324. Read on in the next section, especially
+ Manually add the login into Chatty.
If you successfully opened the link, authorized Chatty on the Twitch.tv + page and got redirected, but the browser can't open the page, first check this:
+
+ Get login data dialog is still open and it says Ready..
+ It needs to be open for this to work and will close automatically when it received
+ the necessary data.If you can't get the page to load, you can manually add the login data into Chatty.
+The information you need should be in the address bar of your browser (where you got the error that it couldn't connect to the page). + It should look something like this:
+http://127.0.0.1:61324/token/#access_token=[longish mix of letters and numbers]&scope=chat_login+channel_editor+channel_commercial+user_read
+
+ The access_token (longish mix of letters and numbers)
+ is sort of a revokable password that lets Chatty
+ use some of the Twitch services on behalf of your account. Copy that from
+ the address bar, go to Chatty (close all dialogs if necessary) and paste
+ it into the following command (that you type into the input bar):
/changetoken <the access token>
+ For example if the url looked like this:
+http://127.0.0.1:61324/token/#access_token=abcdefghi12345abcdefg&scope=chat_login+channel_editor+channel_commercial+user_read
+ Then you enter this in Chatty:
+/changetoken abcdefghi12345abcdefg
+
+ After entering the command, Chatty will finish the process by checking + the token and getting the username associated with it. If everything is ok, + it should say that you are now ready to connect.
+If you want, you can check in Main - Login..
+ whether the token you entered has the correct access associated with it.
This applies to Windows 7, and probably other Windows versions. The info + can probably also be applied to other OS with some adjustments.
+ +You can create a shortcut for Chatty, which has some potential advantages (depending on what you need):
+-cd to use a different
+ settings directory.Create a shortcut to Java to start Chatty (for this example the
+ Chatty.jar is located in D:\Chatty\):
New - Shortcut from the context menu. Enter
+ javaw -jar "D:\Chatty\Chatty.jar" as location of the
+ item.Properties from the context menu. Make sure that under
+ Shortcut the Start in points to the folder
+ that the Chatty.jar is in (otherwise some stuff might
+ not work).Chatty.jar and drag it to an open
+ area in the folder, then let go to open the context menu, choose the option to create a shortcut.Properties from the context menu. In the
+ Target field, it should have the path to the
+ Chatty.jar. Before that add: javaw -jar ,
+ so that in total it reads for example:
+ javaw -jar "D:\Chatty\Chatty.jar"The javaw part might automatically be changed into the full path
+ to the javaw.exe when you save the shortcut.
Add launch options or icon:
+Properties from the context menu, then go to the
+ Shortcut tab.javaw -jar "D:\Chatty\Chatty.jar" -cdChange Icon.. and then Browse.. to
+ select an item to use for the Shortcut from your harddrive.
+ (Download Chatty icon
+ as .ico file, right-click and
+ Save target as..)You can then start Chatty by using this shortcut or you can drag it to the + taskbar to attach it to it.
+ + + diff --git a/help/0.8.2/help-guide_folders.html b/help/0.8.2/help-guide_folders.html new file mode 100644 index 0000000..9d2dcda --- /dev/null +++ b/help/0.8.2/help-guide_folders.html @@ -0,0 +1,230 @@ + + ++ Files/Directory structure | + Backup +
+Learn what directories and files Chatty creates/uses.
+ +The settings directory by default is in your user home directory in a
+ subfolder called .chatty. If you use the -cd
+ commandline parameter, then the settings directory is the current Working
+ Directory.
You can use commandline parameters by creating a shortcut and setting the
+ target to something like javaw.exe -jar "D:\Chatty\Chatty.jar" -cd.
Use the command /dir to display and /openDir to
+ open the Settings Directory.
| <settings directory> | ++ |
| |-- backup | +[Folder] | +
| | |-- backup_x_<filename> | +Setting backups | +
| | |-- backup_meta | +Backups meta (last backup, numbering) | +
| |-- cache | +[Folder] | +
| | |-- <various cache files> | +Cached emotes/image files | +
| |-- debuglogs | +[Folder] Files intended to be read + by the user | +
| | |-- debug_session.log.x | +Last session debug log (overwritten every run) | +
| | |-- debugx.log.x | +Rotating debug log | +
| | |-- debug_ircx.log.x | +Rotating raw IRC log (only if enabled) | +
| |-- exported | +[Folder] Files intended to be read + by the user | +
| | |-- stream_highlights.txt | +Recorded stream highlights | +
| |-- logs | +[Folder] | +
| | |-- <channel>.log | +Chat log files | +
| |-- addressbook | +[Settings] Addressbook entries | +
| |-- login | +[Settings] Your login data (keep this secure) | +
| |-- favoritesAndHistory | +[Settings] Channel History/Favorites | +
| |-- settings | +[Settings] Main Settings File | +
| |-- statusPresets | +[Settings] Stream Title/Game presets (Admin Dialog) | +
This directory is associated with Chatty when you start it. This is usually
+ the directory the program is started from. If you created a shortcut to start
+ Chatty with, this may point to the Java-executable instead of Chatty itself,
+ which can lead to errors. In Windows, you can change the Working Directory
+ in the shortcut settings by changing what is defined under Run in.
+ Make sure this points to the same folder the Chatty.jar is in
+ (or something else if you want to customize it, just make sure the files you
+ need are there).
Use the command /wdir to display and /openWdir
+ to open the Working Directory.
| <working directory> | ++ |
| |-- sounds | +[Folder] Sound files | +
| | |-- <sound>.wav | +.wav files | +
| |-- img | +[Folder] Image files for custom usericons | +
| | |-- <various images> | +.png files | +
| |-- JIntellitype.dll | +DLL for global hotkey support | +
This is where the Chatty.jar is located and is used for loading libraries + that Chatty uses.
+ +Chatty performs an automatic backup (enabled by default) everytime it is + started (if at least the number of days as defined in the settings have passed, + by default one). It copies the setting files (except login) to the backup folder + in the settings directory, increasing the numbering of the files with every + backup. It only makes as many backups as defined in the settings and then + starts over with the first number, rotating the files.
+ +This is supposed to make recovery of settings easier in case they are not + read or written correctly and thus lost (which shouldn't usually + happen). In that case you can manually copy/rename the lost files from + a backup (just looks for the most recent one based on the change date + that looks fine).
+ +If some settings are important to you this can help, but you + shouldn't rely on it. Always make your own backups, best on a + different device!
+ +If you lost your setting files (or some of them) but still have + a backup, you can manually copy the backup to restore it.
+/openBackupDir to open the Backup folder
+ (or enter /dir and navigate to the Backup folder
+ manually).backup_x_<name>,
+ these represent the separate batches of backups.backup_x_<name>
+ to <name> (for example backup_2_settings
+ to settings). You can ignore the backup_meta file./dir or /openDir commands),
+ overwriting any existing setting files.Some documentation of prior or current issues for reference.
+ + +Chatty just randomly closes, apparently the JRE completely crashes.
+ ++# +# A fatal error has been detected by the Java Runtime Environment: +# +# EXCEPTION_ACCESS_VIOLATION (0xc0000005) at pc=0x000007f9c08f22bf, pid=272, tid=14464 +# +# JRE version: Java(TM) SE Runtime Environment (7.0_45-b18) (build 1.7.0_45-b18) +# Java VM: Java HotSpot(TM) 64-Bit Server VM (24.45-b08 mixed mode windows-amd64 compressed oops) +# Problematic frame: +# C [atig6txx.dll+0x122bf] + +[..] + +Stack: [0x000000000f5d0000,0x000000000f6d0000], sp=0x000000000f6c9bc0, free space=998k +Native frames: (J=compiled Java code, j=interpreted, Vv=VM code, C=native code) +C [atig6txx.dll+0x122bf] +C 0x0000000000000000 + +Java frames: (J=compiled Java code, j=interpreted, Vv=VM code) +j sun.awt.Win32GraphicsDevice.getMaxConfigsImpl(I)I+0 +j sun.awt.Win32GraphicsDevice.getMaxConfigs(I)I+10 +j sun.awt.Win32GraphicsDevice.getConfigurations()[Ljava/awt/GraphicsConfiguration;+69 +j javax.swing.ToolTipManager.getDrawingGC(Ljava/awt/Point;)Ljava/awt/GraphicsConfiguration;+36 + +[..] ++ +
Seems to have to do with the graphics driver. Reinstalling/updating the graphics driver may +help or using the following commandline parameter, which should disable the calls to the library +that cause the error:
+ +-Dsun.awt.nopixfmt=true
For example:
+ +javaw -Dsun.awt.nopixfmt=true -jar "H:\chatty\Chatty.jar" -cd
After some time, Chatty suddenly shows an error if using the Calibri font.
+ ++java.lang.ArrayIndexOutOfBoundsException: 168 + at sun.font.ExtendedTextSourceLabel.getCharX(ExtendedTextSourceLabel.java:353) + at java.awt.font.TextLine$3.computeFunction(TextLine.java:515) + at java.awt.font.TextLine.applyFunctionAtIndex(TextLine.java:651) + at java.awt.font.TextLine.getCharXPosition(TextLine.java:668) + at java.awt.font.TextLine.getCharLinePosition(TextLine.java:678) + at java.awt.font.TextLayout.buildCache(TextLayout.java:683) + at java.awt.font.TextLayout.ensureCache(TextLayout.java:655) + at java.awt.font.TextLayout.getAdvance(TextLayout.java:885) + at sun.font.FontDesignMetrics.charsWidth(FontDesignMetrics.java:510) + at javax.swing.text.Utilities.getTabbedTextOffset(Utilities.java:422) + at javax.swing.text.GlyphPainter1.getBoundedPosition(GlyphPainter1.java:213) + at javax.swing.text.GlyphView.getBreakWeight(GlyphView.java:722) + at javax.swing.text.ParagraphView.calculateMinorAxisRequirements(ParagraphView.java:732) + at javax.swing.text.BoxView.checkRequests(BoxView.java:935) + at javax.swing.text.BoxView.getMinimumSpan(BoxView.java:568) + at javax.swing.text.BoxView.calculateMinorAxisRequirements(BoxView.java:903) + at javax.swing.text.BoxView.checkRequests(BoxView.java:935) + at javax.swing.text.BoxView.setSpanOnAxis(BoxView.java:343) + at javax.swing.text.BoxView.layout(BoxView.java:708) + at javax.swing.text.BoxView.setSize(BoxView.java:397) + at javax.swing.plaf.basic.BasicTextUI$RootView.setSize(BasicTextUI.java:1714) + at javax.swing.plaf.basic.BasicTextUI.modelToView(BasicTextUI.java:1046) + at javax.swing.plaf.basic.BasicTextUI.modelToView(BasicTextUI.java:1022) + at javax.swing.text.JTextComponent.modelToView(JTextComponent.java:1428) + at chatty.gui.components.ChannelTextPane$ScrollManager.scrollDown(ChannelTextPane.java:1107) + at chatty.gui.components.ChannelTextPane$ScrollManager.access$200(ChannelTextPane.java:994) + at chatty.gui.components.ChannelTextPane.printInternal(ChannelTextPane.java:932) + at chatty.gui.components.ChannelTextPane.print(ChannelTextPane.java:906) + at chatty.gui.components.ChannelTextPane.printSpecials(ChannelTextPane.java:772) + at chatty.gui.components.ChannelTextPane.printMessage(ChannelTextPane.java:189) + at chatty.gui.components.Channel.printMessage(Channel.java:228) + at chatty.gui.MainGui$15.run(MainGui.java:1498) + + +java.lang.ArrayIndexOutOfBoundsException: 0 + at sun.font.ExtendedTextSourceLabel.createCharinfo(Unknown Source) + at sun.font.ExtendedTextSourceLabel.getCharinfo(Unknown Source) + at sun.font.ExtendedTextSourceLabel.getCharX(Unknown Source) + at java.awt.font.TextLine$3.computeFunction(Unknown Source) + at java.awt.font.TextLine.applyFunctionAtIndex(Unknown Source) + at java.awt.font.TextLine.getCharXPosition(Unknown Source) + at java.awt.font.TextLine.getCharLinePosition(Unknown Source) + at java.awt.font.TextLayout.buildCache(Unknown Source) + at java.awt.font.TextLayout.ensureCache(Unknown Source) + at java.awt.font.TextLayout.getAdvance(Unknown Source) + at sun.font.FontDesignMetrics.charsWidth(Unknown Source) + at javax.swing.text.Utilities.getTabbedTextWidth(Unknown Source) ++ +
Hopefully this will be fixed in future Java updates, but for now just don't +use a Calibri font.
+ +Twitch Emoticons appear wrong when Chatty is displayed on a Retina display. +Instead of the Emoticon images, the 404 image the Twitch CDN redirects to is +shown. + +
Apparently in newer Java versions Toolkit.getImage() tries to find a higher
+resolution image by adding @2 to the file name, which the Twitch CDN actually
+responds to by redirecting to an error image, which is then displayed.
Use Toolkit.createImage() and create an ImageIcon with the created image.
+ Usage | + Settings | + Troubleshooting +
+Livestreamer + is a commandline program that can be used to watch streams in a player like + VLC Player. It has to be downloaded and installed seperately from Chatty.
+ +You can open the Livestreamer dialog that Chatty provides via
+ Extra - Livestreamer, where you can directly run Livestreamer
+ and change some settings.
Each time you open a stream via the dialog or a context menu, a tab is + added to the dialog where the output of the Livestreamer process is + redirected to. If you open a stream with the same stream name and quality you already + have open in a tab whose process isn't currently running, then that tab will + be reused.
+ +The tab of a stream is automatically closed when you close the Video
+ Player opened by Livestreamer, if the dialog isn't currently open. Otherwise
+ you have to close it yourself by using the Close-button on the
+ top right, which turns into an End process-button as long as
+ the process is still running. The Retry-button can be used to
+ re-run the last command of that tab (for example when it couldn't find the
+ stream, but you want to retry now because you know it's come online).
The settings can be changed in the Livestreamer dialog.
+Select
+ which tells Chatty you want to select a quality in the dialog. Seperate
+ qualities by space or comma. Add a | (vertical bar) to add
+ a seperator to the menu.
+
+ Best, High, Worst | SelectSource High Medium Low Mobile | Selectlivestreamer, which
+ should usually be sufficient if the program is correctly included in
+ the systems PATH variable (or similiar), but it may also include the
+ full path to Livestreamer. Surround the path or any other parameter with quotes if it contains
+ spaces (e.g. "C:\My Programs\Livestreamer\livestreamer.exe").
+ "C:\My Programs\Livestreamer\livestreamer.exe" --player "C:\Program
+ Files\MPC-HC\mpc-hc64.exe" (specify full path to Livestreamer
+ and use a different player)/usr/local/bin/livestreamer (this might work on Linux/Mac
+ if it can't find Livestreamer without the full path)If you get an error like Error: java.io.IOException: Cannot run
+ program "<...>": CreateProcess error=2 [..], then
+ Chatty probably can't find Livestreamer on your system.
To solve this, first make sure that
+ you actually have Livestreamer installed. You need to install it on you own, it does
+ not come bundled with Chatty. If you are sure it is installed (and you maybe can
+ run it from the commandline just fine), you may have to tell Chatty the full
+ path to the Livestreamer executable for it to work by entering it in the
+ Base command or commandline options field. See the Settings section
+ above for examples and help on that.
+ Restrict Memory Usage | + OutOfMemoryError +
+The programs memory is managed by Java, which means Java allocates a + certain amount of memory which is then filled up with data of the program + and once Java decides so, it cleans up data that is not used anymore + (Garbage Collection). This leads to the actual memory usage going up and + down constantly, while the allocated memory mostly stays the same. So + even if only 50 MB are filled with data by the program at the time, Java may + still have 200 MB reserved to optimize Gargabe Collection. Thus, the memory usage in e.g. the Task Manager + may not reflect what the program actually requires, just how + much Java uses.
+ +Use the /appinfo command in Chatty to get some information
+ about the current memory usage.
A typical memory usage pattern, which can change over time as the program
+ is running while Java optimizes Gargabe Collection:
+ 
You can restrict how much memory Java is allowed to use by specifying
+ commandline parameters for Java. Create a shortcut
+ and add the appropriate parameter after the javaw.exe but
+ before the -jar parameter.
For example to restrict memory to 100 MB: javaw -Xmx100M -jar "D:\Chatty\Chatty.jar"
If you get an OutOfMemoryError then Java ran out of memory. This can + either be because it simply can't allocate enough memory (at least 100 MB is recommended) + or there is a bug that prevents it from cleaning up memory that is not + actually used anymore. These kinds of bugs are pretty difficult to track + down though, especially if they only occur somewhat randomly.
+ + + + diff --git a/help/0.8.2/help-releases.html b/help/0.8.2/help-releases.html new file mode 100644 index 0000000..f1c17c0 --- /dev/null +++ b/help/0.8.2/help-releases.html @@ -0,0 +1,1196 @@ + + ++ 0.8.2 | + 0.8.1 | + 0.8 | + 0.7.3 | + 0.7.2 | + 0.7.1 | + 0.7 | + 0.6.7 | + 0.6.6 | + 0.6.5 | + 0.6.4 | + 0.6.3 | + 0.6.2 | + 0.6.1 | + 0.6 | + 0.5.1 | + 0.5 | + 0.4 | + 0.3 +
+ +This page shows important information about new versions as well as the + full list of changes.
+ +During March Twitch migrated Twitch Chat to new servers (Amazon AWS), + which you probably noticed due to some issues for some third-party + tools. This however also brought some improvements:
+ ++Improvements +============ +- Added some account info to User Info Dialog (click on "More..") +- Added auto-unhost feature (to unhost when your stream goes live, disabled by + default) +- Added new Twitch Player URL in context menu +- Added feature to automatically add Addressbook categories based on Subscriber + notifications (experimental) +- Added feature to automatically copy messages into clipboard +- Admin Dialog: Added error message for trying to set invalid stream status +- Added context menu entries to directly host channel +- Made URL detection a bit more lenient +- Updated help + +System +====== +- Added single-instance mode, with the ability to join channels in the already + running instance +- Added in-app announcements (Help - Announcements), for more reliable + communication of relevant news about Chatty (if new announcement is available + a window will pop up on start and a notification will be shown in the main + menu bar) +- Moved debug logs into separate directory +- Added /proc command to start native processes out of Chatty +- Made restoring window position more lenient for partly off-screen positions + +Connection +========== +- Bouncer: Some changes allowing you to connect to a Bouncer +- Whispers: Moved to main chat (AWS) +- Whispers: Hidden userlist for Whisper tabs by default +- Whispers: Added auto-responses for ignored/non-whitelisted users (disabled by + default) +- Increased max reconnection attempts to 40 +- Added `force_verify=true` parameter to Authorize URL (makes Twitch always ask + if you want to Authorize, makes sure you are logged in to the right account) +- Added some support for selecting the correct chat server + +Emotes +====== +- Emote Dialog: Improved shown info a bit +- Added /emoteonly and /emoteonlyoff commands (in case they get enabled again) +- Added "emotesets" parameter to /refresh command +- Changed twitchemotes.com API URL (which is the source of emoteset information) +- ShortenDisplayOfExcessivelyLongEmoteCodesLookingOutTheirWindow + +Settings +======== +- Added more chat font size choices to GUI +- Added input font setting to GUI +- Added setting to prevent highlights from specific users (e.g. your own bots) +- Added setting to toggle closing of Emote Dialog when double-clicking on Emote +- Added setting to remember Status History table sorting order +- Added setting to toggle Usercolor correction +- Added setting to display more verbose uptime in titlebar (enabled by default) +- Added setting to toggle check for restoring off-screen window position +- Added setting to prepend arbitrary text to the window title +- Changed default for showing animated emotes to off +- Changed default for Min. Userlist Width to 0 +- Changed default for Whisper Display Mode to per user +- Changed defaults for server/port (actively changed when updating to this + version, if setting values are on the previous default) +- Changed default for Highlight Mod Command to !highlight, ignore case for both + the channel and command setting +- Made setting names case-insensitive (for use with setting commands) +- Changed the process of saving settings in an attempt to make it more reliable +- Added menu entry to save settings manually + +Bugfixes +======== +- Fixed Admin Dialog sizing causing display issues +- Fixed spam protection message being displayed on the wrong channel +- Fixed new Twitch Emotes code being one character short +- Fixed autojoin not working sometimes +- Fixed framerate of GIFs, which may break some GIFs that worked before, but + prevents high CPU usage (displaying animated GIFs in Java is hard) +- Check if Java supports opening URLs on the current platform and run native + command if necessary +- Fixed sounds not being closed when finished playing +- Fixed tabs not changing correctly on System Look&Feel +- Fixed error on host notification due to moving Whispers to AWS ++ +
/w (whisper) command and receive whispers in Chatty, read the
+ Whisper Help (some configuration required).Chat).+#### New features +- Added experimental Whisper support (this will probably not be developed much + until Twitch moves Whispers to the new system, read help on how to enable) +- Improved TAB Completion: Added predictive sorting for names which gives users + who recently talked/highlighted you a higher priority, added setting to + toggle completion to common prefix (disabled by default) +- Added dedicated ignore user lists (separate for chat and whispers) + +#### Chat Window +- Added Pause Chat when moving mouse over chat feature (enable in the settings) +- Changed Ctrl to be used to pause chat, use AltGr for selecting when clicking + on a username in chat +- Don't scroll down when scrolled up even when scroll down timeout has passed + while holding Ctrl +- Added one-click moderation when holding Ctrl (configure in the Chat settings) + +#### Tabs +- Added manual resorting of tabs by drag and drop +- Added more menu entries to close tabs to Tab Context Menu +- Rejoin channels in the order the tabs were, when rejoining channels from last + session on start (depends on the Tab Order setting of course) +- Switch to tab when right-clicking on it (which wasn't the case everywhere) +- Optional mouse wheel scrolling through tabs (enable in the settings) + +#### Emoticons +- Added FFZ Feature Friday again and improved support for it in Emotes Dialog +- Improved Emote Context Menu (open twitchemotes.com for Twitch emotes id, + added channel submenu for more emotes where it makes sense) +- Added setting to toggle animated emotes (BTTV GIF emotes) +- Allow global FFZ/BTTV emotes to be added to the favorites as well +- Don't show 150% size in Emotes Dialog Detail View when emote is too wide +- Sort Channel Subscriber Emotes alphabetically + +#### Chat/Stream Info Display +- Improved display for long slowmode times in the titlebar +- Implemented new ROOMSTATE command, allowing for accurate display of + submode/slowmode/r9k in titlebar +- Added stream uptime to the titlebar, added settings to customize what is shown + in the titlebar a bit more (`View - Options - Titlebar`) +- Added stream uptime to Live Streams Dialog + +#### Settings / Configuration +- Added timestamp option to "Log to file" settings (previously only changeable + with setting commands) +- Highlight/Ignore: Allow non-standard channels in `chan:`/`!chan:` prefixes +- Added setting for minimum userlist width +- Switched default ports to `6667,443` due to port 80 not being available + anymore for standard IRC +- Increased default chat buffer size +- Updated Settings Dialog +- Added `$globalmod` and `$anymod` status identifiers for Usericons/Usercolors +- Added `$first` option for Custom Usericon restriction to show them in front of + the regular Usericons +- Added setting for filtering of combining characters to change between off, + lenient and strict replacing (filter can circumvent performance issues) + +#### Commands / Menus +- Added Copy Stream Name to Channel Context Menu (Miscellaneous submenu) +- Added hotkey action to close all/all shown notifications +- Added /openBackupDir command +- Added entries to the `Extra` menu to record/open Stream Highlights +- Added "Open speedrun.com" Channel Context Menu entry in Miscellaneous submenu + (which tries to open the leaderboards page for the current game) + +#### Other Changes +- Added "Open in online help" button in Help window +- Show indication of action message (/me) in User Info Dialog chat history and + log files (star in front of the message) +- Apply bans/timeouts to Stream Chat +- Changed website URL to GitHub +- Improved debug output a bit, renamed current session debug log file +- Keep showing "Update Available" notification after restart +- Removed condition to use maximum reconnection delay when host could not be + resolved +- Updated help + +#### Bugfixes +- Fixed error in slowmode message parsing +- Changed Ignore option `config:info` to only apply to info messages, not + regular chat messages +- Fixed tab not showing new message if message was highlighted with + `config:!notify` option +- Fixed message parsing from inadvertently ignoring some (rare) messages +- Fixed raw message parsing +- Fixed replacing of all linebreak characters when sending message +- Fixed wrong channel being cleared when "Clear chat when cleared by a + moderator" setting is enabled +- Fixed hotkey bug when opening/closing hotkey settings with global hotkeys + disabled +- Fixed off-by-one error for reconnection attempts +- Fixed sounds on Linux (hopefully) ++ +
+Core Changes: +- Connection: Implemented IRCv3 tags/commands/membership support +- Userlist: IRCv3 now supports optional joins/parts (correct userlist), which is + enabled by default in Chatty (doesn't mean joins/parts have to be shown) +- Added experimental support for secured connections + +Emoticons: +- Changed Emoticon parsing to use spaces as delimiter instead of word boundaries + (to match changes made to Twitch Chat) +- Scaling: Added settings to scale emotes in chat and the Emotes Dialog +- BTTV: Implemented BTTV Custom Channel Emotes, switched to new BTTV API +- IRCv3: Implemented new Twitch Emotes API, including using IRCv3 tags +- Emote Dialog: Added overview of all global emotes (Twitch and Other) +- Detail View: Added Detail View that can be opened for an emote with different + scaling and a table of information about the emote +- Context Menu: Added more entries and information +- Added emote image caching, making loading of emotes a bit faster and hopefully + more reliable if the server can't be reached at the time of loading +- Added feature to add custom emotes (locally), also allowing you to replace + other emotes +- FFZ: Switched to new API (and showing more info about the emotes) + +TAB Completion: +- Changed to work with @ in front (or any other non-word characters around it) +- Added info popup to show completion information (how many items are found, + which item you are at while cycling through results) +- Added completion for emotes (Shift-TAB) +- Added completion for setting names (TAB when using after setting command) +- Added completion for some commands (TAB after /) +- Added support for custom completion items that you can add in the settings or + via the /customCompletion command + +StreamChat: +- Added fitting context menu to stream chat dialog +- Added setting to START inserting text a the top in Stream Chat + (but not insert text at the top in general), added streamChatResizable setting +- Added commands /clearStreamChat, /testStreamChat, /setStreamChatSize, + /getStreamChatSize + +Other Enhancements: +- Added bot badge (bot names from BTTV/FFZ APIs and local setting) +- Added ability to record current stream time via commands to assist in creating + stream highlights +- Added setting to clear chat when channel is cleared by a moderator +- Hosting: Added info in the title which channel is being hosted, added warning + in chat when a channel is still being hosted when the stream is going live +- Streamlined reconnection messages a bit +- Output message if channel attempting to join doesn't exist on Twitch +- Added correctly capitalized names from IRCv3 display-name tag, removed + commands to change capitalization of names locally +- Added experimental showing of slowmode/submode status in the titlebar (only + shows correctly if mode toggled while you are already in the channel, until + chat sends that info on join as well) +- Added feature to locally set custom names for any user which show up in chat + and the userlist +- Highlighting: Added more prefix options +- Ignore: Added prefix option to ignore info messages +- Added Miscellaneous-menu to User Context menu and added entry Copy Name + (meaning copy to clipboard) +- Added Miscellaneous-menu to Channel Context menu and added entry to join + currently hosted channel +- Added /copy command which copies the given text to the clipboard +- Added /color command which redirects to the Twitch Chat /color command +- Added /livestreamer command to open streams/dialog via command +- Added /appinfo command +- Added /r9k and /r9koff commands +- Added workaround for Twitch API sometimes returning stream information with + missing channel object (no title available), assuming previous title +- Updated help + +Changes: +- Files: Moved cache files to be saved in the /cache folder +- Reduced Twitch API debug log spam a bit +- Increased join delay a bit +- Updated Settings Dialog layout to adjust to the dialog size better +- Changed Twitch API version calls to use v3 by default +- Changed Usericon image files starting with "http" to be interpreted as URL +- Disabled auto request of mods list for the time being, since mod status for + messages should always work and mod status in the userlist should probably + work if the userlist works in the first place +- Decreased Live Streams dialog scroll speed a bit + +Settings: +- Highlighting: Added highlightIgnored setting whether to try to highlight + messages that have already been ignored (disabled by default) +- Changed capitalizedNames (first letter only) setting to default to on (only + affects fresh settings) +- Debugging: Added setting to log raw IRC traffic to file (disabled by default) +- Added mainResizable setting to be able to turn off resizing of the main window +- Added setting to ignore Stream Status Notifications for Stream Offline +- Added some more support for different setting types to setting commands +- Changed setting commands to support numeric lists +- Changed Settings Dialog to only tell you to reconnect if you don't have to + also restart Chatty (required by a setting change) + +Bugfixes: +- Fixed bug where channel would constantly be reopened when it failed to join + (especially happening on non-existing channels) +- Fixed bug where reonnection timer would sometimes not be cancelled +- Fixed synchronization that could lock up the GUI when performing API requests +- Fixed username case-sensitivity issues for commands +- Fixed error in stream status writer when stream doesn't have a game set +- StreamChat: Fixed bug where stream chat wouldn't scroll down properly +- Addressbook: Fixed remove commands issues with case-sensitivity +- Run correct commercial length in Admin Dialog when using a hotkey +- Fixed close channel hotkey to close active channel rather chan active tab +- Possibly fixed some info messages from Twitch Chat not showing up +- Changed "Mr. Freeman" to "Dr. Freeman" +- Fixed rare error in tables (like Follower Dialog) +- Fixed and enabled workaround for some combining characters causing performance + issues (replacing more than two combining characters in a row with ****) ++ +
+New features: +- Added customizable hotkeys feature allowing you to add/remove/change hotkeys + in the settings (Global Hotkeys Windows only) +- Added Stream Chat dialog (only regular messages, optional message timeout to + make them disappear after some time, mainly for testing right now) +- Added support for global mods +- Added $chan parameter to Custom Commands +- Log to file: Added setting to customize timestamp (via setting commands) + +Changes: +- Changed inputbox font to prevent bug where fallback fonts wouldn't work + properly in JTextPane +- Changed default for "Restore dialogs" setting to "Restore dialogs from last + session" (only if you start from fresh settings) +- Backup: Increased setting backup count to 5 backups +- Changed staff usermode symbol to & (text symbol, not the badge) +- Added scaling to emotes if the image is too big, set maximum size to 100x50 +- Improved setting commands (added add/remove commands for String lists, save + default for lists/maps), improved help for setting commands +- Added "set:" commandline parameter to set any setting that can be set with the + /set command +- Changed to new BTTV emotes API +- Improved URL parsing a bit +- Updated help + +Bugfixes: +- Fixed Simple Title menu setting not being updated correctly +- Set foreground color of Viewer History based on the current foreground color + of the dialog, so it fits the LAF +- Set Notification foreground color to black, in case a LAF uses another color + that doesn't go well with the yellow background (Notification colors should be + customizable eventually) ++ +
+New features:
+- User Dialog Buttons (Timeout/Custom Commands) now support shortcuts, Ban and
+ Unban buttons are not hardcoded anymore and have to be added to the setting
+ (setting is automatically changed if you switch from a version before 0.7.2)
+- Added User/Line Selection feature to select a User in chat via the keyboard
+ so e.g. timeouts are possible completely via the keyboard
+- Added feature to modify Addressbook entries via a file
+- Added color restriction for Usericons
+- Highlight/Ignore: Added prefixes ("start:", "status:", "!status:", "!cat:",
+ "chanCat:", "!chanCat")
+- Channel Info Dialog now allows to be resized a lot smaller, Viewercount info
+ now adjusting better to smaller sizes
+- Added setting to change Look&Feel (only Default and System for now)
+- Added setting to attach dialogs to main window, so they always stay in the
+ same relative position when the main window is moved
+- Added some keyboard shortcuts
+- Added some support for FFZ feature friday, added /ffzGlobal command to show
+ global FFZ emote codes
+
+Changes:
+- Added menu entry to open login configuration for easier access (no need to
+ disconnect from chat)
+- Improved login configuration dialog
+- When login was determined invalid by automatic check: Changed warning message,
+ don't remove automatically anymore but let user do it if necessary
+- Added Options submenu to View menu to allow more options with direct access
+- Added more options to Title/Game Presets dialog due to S'ome demand
+- Logging to file now enabled by default (only if you start from fresh settings)
+- MOD/UNMOD messages are now disabled by default (from fresh settings)
+- Custom Commands executed from the Channel Context Menu now include the name
+ of the channel as first parameter (without leading #)
+- Some small improvements of labels/info texts in Settings Dialog
+- Increased join delay, increased delay between failed join attempts
+- Ping connection more often if inactive to detect disconnect quicker and
+ possibly prevent disconnect in some cases
+- Improved URL detection (again)
+- Improved debug messages a bit
+- Improved error catching in some places
+- Added more tests
+- Updated help
+
+Bugfixes:
+- Fixed URLs that don't have a protocol prefix (e.g. http://) being opened
+ without a prefix, which resulted in the browser not opening correctly
+- Fixed error in FrankerFaceZ emote parsing
+- Fixed bug where "Close to tray" wouldn't work without "Minimize to tray" being
+ enabled as well
+- Fixed layout problem in Settings Dialog when log path was too long
+- Use usercolor corrected for readability for colored /me messages
+
+
+
+ Favorites
+ page of the Emote Dialog. Right-click on the emote you want to add to
+ open the context-menu and click on Favorite, then open the
+ Emote Dialog (Extra - Emoticons or Ctrl+E) and
+ choose the Favorites page to view your favorites.exported subfolder of the settings directory (so
+ e.g. C:\Users\name\.chatty\exported\). If you are using
+ this feature e.g. by refering to the created textfiles in your
+ streaming software, you'll have to adjust the path to the textfile
+ there.+New features: +- Added Emoticon Favorites, that are displayed in the Emote Dialog (you can only + add Twitch Emotes for now, not FFZ or BTTV) +- Added support for correct capitalization of names in chat (experimental, you + have to enable it in the settings if you want to try it) +- Show correctly capitalized stream names in Live Streams/Channel Info Dialog + (independent of the Correctly Capitalized Names setting) +- Added minimize to tray/close to tray options +- Added setting for auto scroll down timeout length +- Added setting to change font size of dialogs (experimental, only Userinfo now) +- Added setting to customize chat log file location +- Added context menu to Follower/Subscriber Dialog to export list to file +- Added support for FrankerFaceZ global event emotes + +Changes: +- Changed tray icon to only show when needed +- Set proper tooltip for tray icon +- Added some more timestamp options +- Changed stream status writer output to "exported" subfolder of settings folder +- Changed stream status writer to ignore case of stream name +- Channel Info: Added approx. last stream length as tooltip to "Offline" text +- Changed Twitch badges to use images instead of alpha (shows new colors now) +- Changed base colors for badges to new Twitch colors (affects FFZ Mod Icon and + Fallback Icons) +- Allow for selection of text in chat by double-clicking (focus to inputbox now + only on single-click on chat) +- Detect a few more URL formats to be made clickable +- Improved debug logging a bit (memory usage) +- Some small improvements to memory usage +- Added some more characters to Font Selection Dialog, but also an input field + to enter your own text to test the font +- Catch the error if hotkey library couldn't be found and output warning instead +- Updated help + +Bugfixes: +- Fixed info messages sometimes going to the wrong window if popouts are used +- Fixed subscriber sorting in userlist (but overall sorting can still be screwed + up sometimes) +- Fixed wrong channel being joined when joining channel out of user context menu + with "Capitalize Names (First Letter)" option being enabled (fixed implicitly + by changing some stuff around for supporting capitalized names) +- Added workaround for Twitch emotes appearing wrong on Retina displays +- Nothing to do with Chatty in particular (it's the same for every IRC client), + but the "xy just subscribed" message should now work for everyone again, + because Twitch fixed it :) ++ +
Just a reminder: If you don't care about a correct userlist or joins/parts,
+ you may want to switch to Twitch Client Version 3 (Settings - Advanced),
+ which has a few advantages.
+ More information..
+New features: +- Added Emoticon Dialog, showing emotes you paid for (Subscriber/Turbo) and + channel-specific emotes (FFZ/BTTV) +- Added Followers/Subscribers lists, added new follower sound (works only if + Followers Dialog is open) +- Livestreamer: Added setting to use auth (for sub-only streams), added setting + whether to open the Livestreamer Dialog when opening a stream from the menu +- Added setting to write stream info to a file (e.g. for display on stream) +- Automatically request moderator list once per channel, added /fixMods command + to temporarily fix mods status without showing the list of all moderators +- Added /host and /unhost commands +- Added shortcut Ctrl-W to close active tab/restore popout to tab +- Admin Dialog: Added option to automatically repeat commercial on the set delay +- Added stream uptime to Channel Info Dialog (how long ago a stream was started) + +Changes: +- Changed message parsing to support "<name> is now hosting you" notification + (only works on Twitch Client Version 3 though, see Settings - Advanced) +- Added setting to specify the timezone of the timestamp seperately from the + system timezone setting +- Added kadgar.net to open live streams from the context menu +- Added optional filter to remove combining characters used in some languages + that may cause an error in some cases +- Livestreamer: Reuse open tabs if process stopped and opening stream with the + same stream/quality, re-enable quality selection buttons if process stopped, + improved labels and help +- Added more timestamp options in the settings and changed to showing as example +- Added gzip support to Twitch API requests +- Added check to confirm status of stream going offline, which may or may not + prevent wrong offline notifications if the Twitch API returns false data +- Added hint about entering Twitch Commands in invalid command message +- Updated help + +Bugfixes: +- Fixed error in message parsing +- Fixed display error with ban messages +- Fixed a possible bug with notifications +- Now showing "<number> /host commands remaining this half hour." message ++ + +
+New features: +- Added support for some of the BetterTTV emotes +- Added feature to ignore indiviual emotes, which makes them not turn into an + image (but their code will still show up) +- Changed game select dialog to one single list for favorites/search as to not + waste so much space +- Added setting to change the livestreamer command (so you can also e.g. set the + full path to Livestreamer if necessary) +- Added option to combine ban messages of the same user within 10 seconds, for + example "<name> has been banned from talking (3)" means banned 3 times +- Added "/ab change" command to add/remove/toggle categories in a single command +- Added /uptime command +- Added /openUrl and /openUrlPrompt commands (for use in custom commands) +- Added ignore setting to not show ignored messages info (count/nick) in chat if + the ignored messages dialog is currently open + +Changes: +- Live Streams window always on top of main window (seems a bit flickery though) +- More Dialogs now closeable with ESC +- Added Ctrl+J shortcut for opening Join Dialog +- Save Channel Favorites sort order between sessions +- Increased number of saved lines per user from 20 to 100 +- Reorganized Settings Dialog a bit (Usericons/Emoticons on seperate pages) +- Added context menu to Race Id (blue link) in Race Viewer +- Possibly improved debugging of emoticon loading errors a bit +- Updated help + +Bugfixes: +- Search dialogs (Ctrl+F) fixed for popouts +- Fixed error on update notification +- Improved API response parsing a little bit +- Fixed context menus in Highlights/Ignored Messages dialogs ++ + +
+New features: +- Ignore messages (similiar to the Highlight system, match messages by keywords, + usernames, addressbook categories and channels) +- Improved Emote Context Menu (now with channel name on subemotes and clicking + on emote code inserts it in the input box) +- Improved subscriber detection on Twitch Client 1 +- Improved Update Notification to now also show in the Main Menubar (clicking + on it opens a window showing the changelog) +- Livestreamer Context Menu quality selection now customizable +- Added some commands (including /ffz to show FFZ emotes of the current channel, + some commands to open dialogs and stuff intended for use in Custom Commands) + +Changes: +- Addressbook categories are now all made lowercase when added/loaded from file +- Regular commands can now be also used in Context Menus/User Dialog settings +- Improved error handling a bit (hopefully) +- Removed Ignore Joins/Parts setting in favor of Twitch Client 3 +- Changed Twitch Client 1/3 setting to include small explanation +- Added sort by viewercount in Live Streams Dialog +- Added chan: and !chan: prefixes (Highlights and Ignore) +- Updated help +- Show how many Highlighted/Ignored messages are in the dialogs in the View-menu +- Improved text settings editor (auto adjust size when typing, added help) +- Changed Context Menu/User Dialog settings to allow more flexible formatting + (linebreaks allowed, / for command optional, | for seperator doesn't have to + be directly in front of a command, but still applies to the following one) +- Moved to new FFZ server and updated parsing (recently added emotes should now + show up) + +Bugfixes: +- Fixed horizontal scrolling sometimes happening in chat window +- Fixed URL Context Menu stream detection to be case-insensitive +- Fixed display of "<" in Notifications +- Hopefully fixed possible display error ++ +
+New features: +- Reworked usericon (badges) system, which also allows custom usericons, + either replacing the default ones or adding some of your own +- Added Custom Commands, which allow you to define aliases for anything you + can enter into the inputbox (like chat messages, commands) +- Added settings to add Custom Commands to the User/Channel Context Menus and + changed Timeout buttons setting to also add Custom Commands to User Dialog +- Added option to always show the chat scrollbar, which can be useful for + streamers who always want to capture the same subregion of the window +- Added /clearchat command which clears all text from the current chat window +- Added settings for what to do when Chatty is started (show connect dialog + or connect immediately and autjoin channels etc.) + +Changes: +- Only show the "<user> has been banned from talking" message for users that + are currently known in the channel (that have said something, have joined, + been modded, etc.) +- Removed hardcoded /slap command, but added it as default to Custom Commands +- Removed "Set color" entry from User Context Menu, but added /setcolor + command (so it can be readded using Custom Commands if necessary) +- Updated help +- Changed list settings editor (used for Highlights, Logging, Commands) +- Reorganized Settings Dialog a bit +- Updated /testNotification command to also allow for a channel parameter +- Changed Highlight Notification to switch to the channel the highlight + originated in (similiar to Stream Status Notifications) +- Regular commands now case-insensitive +- Handle image URLs which may brake due to possible changes in the Twitch API +- Added /echo command to just output text as info message (e.g. for testing) + +Bugfixes: +- Fixed speedrun.tv Race Link in SRL Race List context menu +- Made "Races with.." search case-insensitive +- Fixed possible flickering of chat window when being scrolled up +- Remove linebreaks from messages send to the server +- Fixed some possible display bugs in Settings Dialog +- Right-clicking on emotes now works on the whole emote ++ +
SRL-menu.Extra-menu)
+ and optional context menu entry.+New features: +- Added SpeedrunsLive (SRL) race viewer +- Added automatic settings file backup (copies settings to the /backup folder + when you start Chatty, at most once per day) +- Added Livestreamer support (start Livestreamer out of dialog/context menus) +- Added feature for unique addressbook categories under some circumstances +- Added "Simple Title" setting to have only "Chatty" as title (Extra menu) + +Changes: +- Improved debug logging (added append to current file, max file size, rotate + between several files when max file size is reached) +- Improved scrolling when window is made smaller +- Added small delay between joins, automatically rejoin if join failed, added + "Joining #channel.." message (which indicates a JOIN was send to the server) +- Some smaller improvements +- Added commands to open the current settings/working directory +- Updated help + +Bugfixes: +- Possibly maybe fixed bug with default userlist width, but it can still be a + bit finicky +- Fixed bug in Channel Favorites dialog when table is empty +- Fixed /myemotes command +- Fixed bug when joining channel out of popout ++ +
Close but also
+ Popout the channel.30s button if the Admin Dialog is open on the
+ Commercials tab.+New features: +- Popout channels into their own window to be able to view them side-by-side +- Added context menu and improved sorting to Channel Favorites dialog +- Added check whether window restore position is actually on a screen (if not + then open on default position) +- Added Highlight prefix to cutomize color for individual highlight items + (also added ordering buttons that can be necessary for this feature) +- Added navigation buttons with page history to Help window +- Added command to manually refresh emoticons (and badges if you rejoin) +- Added command to show a list of your subemote codes (better emote + integration possibly maybe soon) +- Added option to show action messages (/me) colored like in webchat + +Changes: +- Commercials hotkey now simulates a click on the 30s button if the + Admin Dialog is open on the Commercials tab (so you can also use a delay) +- Added more information to the emote context menu (unfortunately you have + to right-click on the left side of the emoticon to open it) +- Changed default access options to all selected (you can still deselect them if + you don't need them and you think it's safer not having them on the token) +- Decreased scrolling step a bit +- Improved scroll detection for scrolled up timeout +- Improved main window title change responsiveness +- Some small improvements +- Reorganized and updated help + +Bugfixes: +- Fixed some possible errors by adding some checks +- Fixed bug when adding a usercolor (not correctly enabled Done button) +- Fixed bug canceling the list item edit dialog (highlights/logging) ++ +
Chat Client Version 3 option in the Settings
+ Dialog under Advanced. More information..+New features: +- Admin Dialog: Select previously used or favorited stream status (title/game) + from the presets dialog for your title changing convenience +- Optional new chat version that has no joins/parts but has better channel + association for bans/timeouts/subscribers and "xy just subscribed" message +- Added /slap command due to S'ome demand +- Improved connecting to chat (automatically trying different servers/ports) +- Added more shortcuts and stuff +- Added option to rejoin currently open channels when connecting + +Changes: +- Moved Ignore joins/parts option to settings dialog +- Some small improvements +- Updated help + +Bugfixes: +- Hopefully fixed synchronization error +- Fixed error when editing game favorites +- Fixed error when no stream title is set ++
+New features: +- Added Addressbook to associate name with categories, that can be referenced + from usercolor settings and highlight settings +- Added usercolor settings to locally assign custom usercolors +- Option to restore dialog positions/reopen dialogs on start + +Changes: +- Improved setting for timeout buttons/added to GUI, improved timeout messages +- Highlight: Default username now matching on word bounds, added word bounds + matching prefixes, added highlight next messages +- Reorganized settings dialog to accomondate new settings/features +- Updated help +- Parse /mods response to make users mods +- Improved Named Colors panel in color chooser +- Added Ctrl-Shift-Tab to switch to previous channel +- Added server/port settings +- Added setting to enable/disable stream status messages in chat + +Bugfixes: +- Fixed FrankerFaceZ mod icon parsing to reflect recent changes +- Fixed parsing error +- Fixed userstats max length +- Added scrolling to "Removed Streams.." list ++ + +
+New features: +- New more flexible notifications that replace the system tray notifications + (you can still switch back to them though) +- Added chat logging to record messages and stream/chat infos to file +- Added Spam Protection +- Admin Dialog: Relative times, use own channel when no channel is joined, + last commercial run time, improved several channels support, dialog + not modal anymore, configurable commercial run delay, added help +- Added message sound, load sound file names from sounds folder, improved + sound settings, changed volume values (you may need to adjust your volumes) +- Check if connection was lost a bit faster depending on previous activity +- Added new error dialog +- Show important release information on first startup of new version + +Changes: +- Changed shutdown process +- Improved settings dialog (help, icons, components, restart required + warning) +- Remove additional whitespace from incoming messages +- Replace some special html character codes in incoming messages +- Default userlist width setting, userlist width 0 now possible +- Always output stream status on join (not only if it's new) +- Improved help +- Added setting to enable (and thus disable) open url prompts +- Added Copy URL option to url prompt +- Added setting to highlight own messages (always enabled before) +- Added setting to change the tabs order (join order/alphabetical) +- Added context menu item to clear the highlights dialog +- Fixed bug in ViewerHistory when item was still hovered when channel + was changed +- Added help window icon +- Count number of mods on /mods-command response +- Prevent auto-scrolling when search is active +- Added speedrun.tv option for stream urls ++ + +
Changes: +- FrankerFaceZ: Show custom mod icons (available in some channels) +- FrankerFaceZ settings, Emoticons/Icon settings seperate +- Prevent dialogs that can open automatically (error messages) from + stealing focus +- Added chat buffer size setting +- Added setting to enable/disable mod/unmod messages +- Added some shortcuts +- Added command to show working directory +- Added color preset +- Improved help +- Improved viewer history (fixed times per channel) +- Improved debug output +- Added command/guide in case getting login data doesn't work + +Bugfixes: +- Fixed error in Viewer history ++ + +
<Read user info> access to
+ be able to use that. Go to
+ <Main - Connect - Configure login..>, remove the
+ login and request it again.<Main - Settings - Notifications> if you have the
+ necessary access.+New features: +- Get notified when streams you follow go online (requires + <Read user info> access, which wasn't even in Chatty before, so you'll + have to request new login data) +- View a list of live streams (you followed or whose channel you are in) +- FrankerFaceZ emoticons +- Added search, allowing you to find text in the current chat window +- Deleted messages (from timeouts/bans) now get shortened to a maximum length, + or you can use the previous behaviour or let the whole message be replaced + with <message deleted> +- Change the displayed time range in Viewer History +- Automatically check if the login is valid, if it is suspected not to be +- Clickable links in Channel Info Dialog (also turns #srl-abcd into a race link) +- Cycle between tabs with Ctrl+TAB + +Changes: +- Updated Help +- Changed Settings Dialog Layout +- Detect subscribers even when in more than one channel (may not work correctly + always, but it's a better guess than before) + +Bugfixes: +- Changed color of inputbox cursor to foreground color +- Possibly made emoticon image loading a bit more reliable, but it's hard to + tell what happens when the loading fails +- Handle long URLs in the URL open dialog better ++ + +
+New features: +- Added version checker to inform you about new versions of Chatty +- Added window icon +- Added colors to viewer history to indicate stream status changes, hovering + displays stream title/game at that time (in addition to viewercount/time) +- Stream information is now requested for all channels you have currently joined +- Added tray notifications for highlighted messages and stream status changes +- Added sound notifications for highlighted messages and stream status changes +- Added some commandline parameters, settings and context menu entries + +Changes: +- Nicks in JOIN/PART/MOD/UNMOD lines now clickable +- Settings now saved in seperate files for general settings, login data and + history/favorites +- Fixed tab colors, added indicator for new stream status +- Added delay for global hotkey so it doesn't repeat as much if kept pressed +- Updated and improved help +- Added Mod/Unmod buttons to user dialog (only in your own channel) + +Bugfixes: +- Fixed bug where a status change could reopen a tab that couldn't be closed +- Improved error handling for API responses +- Fixed bug where focus sometimes wouldn't be on inputbox when changing tabs or + clicking in channel ++ + +
+New features: +- Added Admin Dialog that let's you change the title/game of your stream + and run commercials (optional global hotkey for running commercials) +- Added Channel Favorites/History that automatically saves channels you joined + and also allows you to add favorites (history can be deactivated in the + settings) +- Added Highlight system that makes a message appear in another color if defined + keywords are found in it and/or it was send by a defined user (defaults to + always highlight your own name) +- Added join dialog +- Messages from user "twitchnotify" as info messages (when someone subscribed) +- Added Warning when joining more than one channel +- Added context menus for nicks/links/channel/tabs +- Restore window position from last session +- Better debugging and error handling +- Automatically scroll down after 30s of inactivity when being scrolled up + +Changes: +- User Info Dialog: Auto-update message history, show bans, show channel context +- Lowered stream info (title, game, viewercount) update delay to 120s +- Improved default user colors +- Emoticons that contain only word characters match at word boundaries (to match + the new behaviour in Twitch Webchat) + +New settings: +- Option for capitalized names +- Option to show ban message (.. has been banned from talking), defaults to not + showing it +- Color GUI settings (with default and dark preset) +- And of course quite a few for the new features/bugfixes + +Bugfixes: +- Fixed bug where channels would re-open without being + able to close them +- Fixed bug where the userlist wasn't loaded correctly on join + when the channel was joined before in the same session +- Disabled Direct3D Hardware Acceleration by default to possibly + fix Chatty appearing completely black under certain circumstances ++ +
First published version was 0.2 so changelog starts from version 0.3.
+ + + diff --git a/help/0.8.2/help-setting_commands.html b/help/0.8.2/help-setting_commands.html new file mode 100644 index 0000000..736536e --- /dev/null +++ b/help/0.8.2/help-setting_commands.html @@ -0,0 +1,576 @@ + + +There are a couple of commands that allow you to change settings from + the chat inputbox. (You should probably roughly know what you're doing + before using these.)
+ +/set <setting> <value> changes a setting/get <setting> shows the current value of a
+ setting/reset <setting> resets the setting to the
+ default (hard-coded) value/clearsetting <setting> sets string settings to
+ an empty string/add <setting> <value> adds item to a list
+ of strings/numbers/remove <setting> <value> removes item from
+ a list of strings/numbersTip: You can use TAB Completion + for setting names when using it behind a setting command.
+ +The following are settings that can be changed using the setting commands. + A lot of those - but not all - can also be changed in the Settings Dialog, + which is more convient in some cases. This does not show all settings.
+ +Settings with a slightly darker background color
+ are settings that are not available in the Settings Dialog and can only be
+ changed via commands (and sometimes also commandline options). Settings with
+ a lighter color can't (or are not recommended to) be changed
+ via setting commands, but are added to the list because their value can be
+ viewed with /get.
+ Font | + Time | + Server/Connection | + Chat | + Window | + Stream Chat | + Stream Highlights | + Debugging | + Bot Badges | + Copy Messages +
+| Setting | +Type | +Values | +Default | +Description | +
|---|---|---|---|---|
| dontSaveSettings | +Boolean | +false | +Don't save settings when Chatty is closed (-ds commandline option). |
+ |
| timeoutButtons | +String | +See Command Settings Help | +too long | +Buttons in the Userinfo dialog (not only timeout buttons) | +
| userContextMenu | +empty | +Custom entries in the User Context Menu | +||
| channelContextMenu | +empty | +Custom entries in the Channel Context Menu | +||
| twitchnotifyAsInfo | +Boolean | +true | +Show messages from user "twitchnotify" as info messages. + Turn off to show as regular message, so you can e.g. highlight + it. | +|
| backupDelay | +Integer | +Number of days | +1 | +How many days to wait between a Backup | +
| backupCount | +Integer | +Number of backups | +5 | +How many backups to rotate through | +
| hotkeys | +List | +Cannot be edited by command | +The hotkeys that are currently defined | +|
| globalHotkeysEnabled | +Boolean | +true | +Enable global hotkeys that are defined in the settings. + Disable this to temporarily turn off the global hotkeys you + defined. | +|
| imageCache | +Boolean | +true | +Whether images (emotes, usericons) are cached in local + files. | +|
| Setting | +Type | +Values | +Default | +Description | +
|---|---|---|---|---|
| font | +String | +Font name, e.g. Arial or Arial Bold |
+ Consolas | +The font used for the chat | +
| fontSize | +Integer | +Font size, e.g. 14 |
+ 14 | +The font size used for the chat | +
| lineSpacing | +Integer | +Numbers between -1 and 10 probably
+ make the most sense. |
+ 3 | +The space between chatlines | +
| inputFont | +String | +Font name and size, as understood by Font.decode() | +Dialog 14 | +The font for the chat input box (should only be set to
+ Java logical fonts like Dialog or
+ Monospaced, otherwise fallback fonts in
+ chat may not work correctly*) |
+
| dialogFontSize | +Integer | +Font size or -1 to keep default |
+ -1 | +Setting to customize the font size of dialogs, currently + experimentel and only for User Info Dialog. | +
* If a character isn't contained in the chat font you have + currently configured, Java will try to find it in the fallback + fonts. While still not all characters will be displayed this way, it + should work a lot better. You can also add your own fallback fonts + to improve the situation further. However, setting the input box + font to your chat font somehow breaks the fallback font mechanism, + resulting in less characters being able to be displayed (like in + versions before 0.7.3).
+ +| Setting | +Type | +Values | +Default | +Description | +
|---|---|---|---|---|
| timestamp | +String | +Format as understood by
+ SimpleDateFormat
+ or off |
+ [HH:mm] | +The timestamp used for all lines in chat | +
| timestampTimezone | +String | +As understood by Timezone.getTimeZone()
+ e.g. GMT+2 or PST |
+ empty |
+ The timezone used for the timestamp |
+
| logTimestamp | +String | +Format as understood by
+ SimpleDateFormat
+ or off |
+ [HH:mm:ss] | +The timestamp used for all lines in the chatlog files | +
| Setting | +Type | +Values | +Default | +Description | +
|---|---|---|---|---|
| serverDefault | +String | +The server address, host or IP | +irc.twitch.tv | +Default server to connect to, which can be changed in + the Settings Dialog and is saved between sessions | +
| portDefault | +String | +One or more ports, seperated by comma | +6667,80 | +Default port to connect to, which can be changed in the + Settings Dialog and is saved between sessions | +
| server | +String | +The server address, host or IP | +empty | +If set, overrides the defaultServer, can be
+ set by commandline options, not saved in between sessions |
+
| port | +String | +One or more ports, seperated by comma | +empty | +If set, overrides the defaultPort, can be
+ set by commandline options, not saved in between sessions |
+
| username | +String | +Your username | +empty | +Public part of the Login data + to login into chat | +
| token | +String | +OAuth token | +empty | +Secret part of the Login data
+ to authorize with Twitch, don't show this to anyone. You
+ shouldn't change this directly, but use the /changetoken
+ command instead when manually setting the token. |
+
| spamProtection | +String | +messages/seconds, e.g. 10/20 |
+ 18/30 | +How many messages Chatty allows you to send to the server + in the given time, to prevent a ban from chat | +
| membershipEnabled | +Boolean | +true | +Refers to the twitch.tv/membership IRCv3 CAP, which
+ enables sending a userlist and joins/parts, allowing for a
+ correct userlist in Chatty and showing of joins/parts in chat
+ (if separately enabled of course) |
+ |
| Setting | +Type | +Values | +Default | +Description | +
|---|---|---|---|---|
| pauseChatOnMouseMove | +Boolean | +false | +Enables the Pause Chat + feature | +|
| pauseChatOnMouseMoveCtrlRequired | +Boolean | +false | +Require Ctrl to be pressed to start pausing + chat | +|
| commandOnCtrlClick | +String | +Command to run (only the command name) | +empty | +The command to run when clicking on a user while holding + Ctrl | +
| Setting | +Type | +Values | +Default | +Description | +
|---|---|---|---|---|
| windows | +Map | +Cannot be edited by command | +The windows/dialogs positions/sizes as they where loaded + when you started Chatty (NOT necessarily the current ones). | +|
| tabOrder | +String | +normal, alphabetical |
+ normal | +How tabs are added (in the order they are added or + alphabetical). | +
| tabsMwheelScrolling | +Boolean | +false | +Scroll through tabs with mousewheel. | +|
| tabsMwheelScrollingAnywhere | +Boolean | +false | +Allow scrolling through tabs with mousewheel everywhere + on the tabpane where nothing else can be scrolled (mainly + the inputbox). | +|
| Setting | +Type | +Values | +Default | +Description | +
|---|---|---|---|---|
| streamChatChannels | +List[String] | +Channel name (with leading #) or empty | +empty | +Forwards messages from the given channels to + Stream Chat. | +
| streamChatMessageTimeout | +Integer | +Number of seconds, negative to disable | +-1 | +How long messages are displayed before they disappear + from Stream Chat. | +
| streamChatBottom | +Boolean | +true | +Start inserting messages at the bottom. Messages are + always inserted below previous messages, but disabling this setting + will make them start at the top. Requires a + restart of Chatty after changing to take any effect. | +|
| streamChatResizable | +Boolean | +true | +Whether the Stream Chat dialog is resizable by dragging + the edges. | +|
| Setting | +Type | +Values | +Default | +Description | +
|---|---|---|---|---|
| streamHighlightChannel | +String | +Channel name (with leading #) or empty | +empty | +Allows moderators in the given channel to run the + !addStreamHighlight command. | +
| streamHighlightChannelRespond | +Boolean | +false | +If this is enabled, Chatty sends a message to chat when + a moderator uses the !addStreamHighlight command. Otherwise + the response to the command is only shown locally. | +|
| streamHighlightCommand | +String | +The command to use for moderators | +!addstreamhighlight | +Change this to define the command that can be used by
+ mods to add stream highlights in the channel defined with
+ the streamHighlightChannel setting. |
+
| Setting | +Type | +Values | +Default | +Description | +
|---|---|---|---|---|
| debugLogIrc | +Boolean | +false | +Log raw IRC messages in the Debug Window. | +|
| debugLogIrcFile | +Boolean | +false | +Log raw IRC messages to the debug_irc.log file in the + settings directory. | +|
| Setting | +Type | +Values | +Default | +Description | +
|---|---|---|---|---|
| botBadgeEnabled | +Boolean | +true | +Show bot badge in chat for known bots. | +|
| botNames | +List[String] | +Name of the bot | +some default names | +List of locally defined known bots. You have to restart + Chatty for changes to take effect. | +
| botNamesBTTV | +Boolean | +true | +Use bot names from BTTV API. BTTV emotes have to be enabled for this to work. | +|
| botNamesFFZ | +Boolean | +true | +Use bot names from FFZ API. FFZ emotes have to be enabled for this to work. | +|
This can automatically copy all incoming messages into the clipboard.
+| Setting | +Type | +Values | +Default | +Description | +
|---|---|---|---|---|
| cmEnabled | +Boolean | +false | +Enable/disable the copy messages feature altogether. | +|
| cmChannel | +String | +Channel Name (including leading #) | +empty | +Restrict copying messages to this channel. Leave empty + for no channel restriction. | +
| cmTemplate | +String | +Template for the copied text | +{user}: {message} | +This is the template for what is put into the clipboard.
+ {user} is replaced with the name of the
+ user who send the message, {message} is
+ replaced with the text of the message itself. |
+
| cmHighlightedOnly | +Boolean | +false | +Only copy highlighted messages. | +|
Main + | Messages + | Chat + | Emoticons + | Usericons + | Usercolors + | Highlight + | Ignore + | Sounds + | Notifications + | Log to file + | Window + | Commands + | Other + | Advanced + | Hotkeys + | Completion
+This page details some of the settings in the Settings Dialog
+ (Main Menu - Settings). Also try hovering over settings
+ in the settings dialog itself, sometimes you can get a tooltip with some
+ additional information. You can open this help in the settings dialog by
+ clicking on the "Help" link on the bottom left.
Change font and font size by clicking on Select font.
Input font is restricted to two fonts by default, because other fonts + cause issues due to a bug in Java. The number behind the font is the + font size. You can manually change this setting via + Setting Commands (as with most + settings) if you really need another font, but pay attention to the + note about the adverse + effects it may have.
+ +You can select what will happen when you start Chatty:
+This allows you to define how timeouts or bans are displayed in Chatty.
+<message deleted>.<name> has been banned from talking once the timeout
+ or ban is issued.<name> has been banned from talking (3).
+ Ban messages are not combined if a new message from the banned user was
+ received in the meantime./set timestamp <format>. The format can be anything
+ specified by the Java
+ SimpleDateFormat
+ class.Advanced - Correct Userlist is enabled).Names in Twitch Chat are send all-lowercase by default, however there is + an IRCv3 tag send with each message with the display name which Chatty + can use to show correct capitalization. You have the following settings:
+The previous function that requested correctly capitalized names from the
+ Twitch API has been removed. This also means that the associated commands
+ (/refreshCase, /setCase and /getCase)
+ have been removed as well. If you want to customize the capitalization of someone else's
+ name locally, you can now use the Custom Names feature.
+ The names in the userlist will not be correctly capitalized until Chatty has
+ received a message from that user during this session.
<x> seconds of inactivity: If you scrolled
+ up in chat but haven't moved scrollposition in the given number of seconds, it will scroll down
+ if new messages come in. This prevents new messages from being hidden
+ indefinitely if you accidently stayed scrolled up.The Pause Chat feature stops Chatty from scrolling down when you move the + mouse over chat. This can be useful if you want to click specific stuff + in a fast moving chat, for example if you are moderating or just want to + click on an emote to see what it is.
+ +Please note: This will not work properly until the chat window is filled with + text, because only then will Chatty actively scroll down. Also, this + only stops Chatty from actively scrolling down, so if e.g. a big message + is being timed out and thus shortened, stuff may still move around accordingly + (which in that case couldn't really be prevented anyway).
+ +Chat is paused as long as you move the mouse over chat or if you hold + Ctrl (and initiated pausing by moving the mouse). A little + popup in the top-right will indicate that the chat is paused.
+ +Holding Ctrl basicially acts as if you moved the mouse + continuously.
+ +Emotes added to this list will not be turned into an image, but instead + are just shown as their emote code.
+The code added to the list has to be the
+ exact code used internally to find the emote in the messages. Usually this is simply
+ the emote code as you would type it in chat, but some emotes have a special syntax
+ that you might not even know (e.g. :) has \:-?\) as actual code).
+ It is recommended to use the emote context menu (right-click on an emote in chat) to
+ ignore emotes, because then the correct code will automatically be added to
+ the list.
botNames
+ setting, the BTTV API and the FFZ API.
+ By adding entries to the table you can either replace the default icons (Mod, Turbo, Subscriber, ..)
+ or add additional icons for certain users or addressbook categories. The order
+ of the entries can matter, they are matched from the top, so if more than one
+ icon matches that is supposed to replace a default icon, then the first one
+ is used. If more than one Addon icon matches, then all are used
+ (unless you use the $stop restriction, see section Restriction below).
You have the following options when you add/edit an item:
+Moderator, Subscriber, Turbo, ..) or if
+ it should be an additional icon added after the default ones (Addon).
+ Currently, you can have as many Addon-Icons as you want and they are
+ all displayed at once (if they match the requirements of course).serenity) or an
+ addressbook category (e.g. $cat:vip, which would refer to
+ the category vip). If you keep this empty, then no restriction
+ is applied.Addon carries an
+ implicit restriction, since e.g. the default moderator icons are only
+ displayed if the user is a moderator.Addon
+ icons:
+ $stop means if this icon matches (and is thus used),
+ it stops searching for further Addon icons. So
+ it's not really a restriction for this icon, but
+ rather a restriction that affects the following icons and
+ can be used to limit the number of Addon icons.$first puts this Addon icon before
+ the regular icons. The $stop restriction only
+ applies to one group of Addon icons separately
+ (before or after the regular icons).$cat:streamer $first, lotsofs!#channel) to have
+ it displayed in all channels except the one you specified. If you keep
+ this empty, then it will be displayed in all channels..png and
+ should usually be about 18x18 pixels (because that is the size of the
+ default icons). The image files are looked for in the /img
+ subfolder of the working directory (similiar to the /sounds
+ folder). You can click on Image Folder to show information
+ about it and rescan it to update the list of images in the dropdown menu.$ffz which will
+ make it use a FrankerFaceZ icon for that, if available (this only really
+ applies if you use the Type Moderator and want to
+ replace the moderator icon in all channels execept the ones that have a
+ FFZ Mod Icon).http is interpreted as URL.This allows you to specify your own usercolors for either certain types + of users (mod, subscriber etc.) or specific usernames. There are special + items that you can use to specify that (to specify a username, just enter + it without anything else):
+$mod - Moderators$sub - Subscribers$turbo - Turbo Users$admin - Admins$staff - Staff members$all - All users, this can be used to specify a default
+ color (should be put at the very end of the list)$broadcaster - Broadcasters$cat:<category> - A category from the Addressbook#<color code> - A Html color code, e.g. #0000FF for blue, which can
+ be used to replace colors$color:<color code or name> - A Html color code or name (names
+ as hardcoded into Chatty, may be different from other programs), e.g. $color:Blue for blue,
+ which can be used to replace colorsThe order of the
+ entries in the table matters, because it is checked from the top. If you
+ were to put the $all item at the very top, any items below
+ wouldn't do anything, because the first item would already match all users.
+ This e.g. allows you to specify what color a user should have when he is
+ both a subscriber and a moderator (by either putting $mod
+ or $sub first).
If an item is red and has "(error)" appended (e.g. "$color.Blue (error)"), + this means the item is invalid. In the example this is because a point has + been used instead of a colon, so "$color:Blue" would be correct. This can + also happen if it doesn't recognize the given color or the item is just in + an invalid format.
+ +user:
+ prefix with your own name.Add items to the list to make a message highlighted if any one of them + match the message. The following two types of prefixes can be used to change + highlighting behaviour per item.
+ +By default, matching is done case-insensitive and when the word or phrase + appears anywhere in the message. However, you can add the following + prefixes in front of the text to change this matching behaviour. You can + only use one of these prefixes per item, because all text following the + prefix is interpreted as text to match.
+cs: makes it case-sensitive, so cs:test
+ matches test but not Test.w: matches at word boundaries, e.g. w:anna
+ will match anna or Anna: but not
+ Hannah or annah. (Is actually just a
+ shortcut for a special regex, so special regex characters will work.)wcs: is the same as w:, but case-sensitive.start: to match at the start, so start:!bet will
+ match messages starting with !bet.re: to use a regular expression, e.g. re:(?i).*\bGTA ?[V5]\b.*
+ to match GTA5, GTA 5, GTA V, gta5, .. (as a word) anywhere in the message. Note
+ that the regex always tries to match the entire message, so you have to
+ add the appropriate wildcards to match parts anywhere in the message.The following prefixes mostly influence which messages are matched, + however they don't change the matching of the text itself, but instead + provide other information for the highlight system. They can be + placed in front of the Text Matching Prefixes (or the text if you don't + have any other prefixes) and you can even use more than one per item. + These prefixes have to be seperated from eachother and the text by a + space.
+user: to specifiy one exact username (case-insensitive)
+ which should highlight only if this user send the message, doesn't
+ search in the message itself.cat: to specify a category the user who send the message
+ should be in (as defined in the Addressbook).!cat: to specify a category the user who send the message
+ can NOT be in.chan: to specify one or more channels the message has
+ to be send in to match (several channels are specified as comma-seperated
+ list, without spaces).!chan: to specify one or more channels the message must
+ NOT be send in to match.chanCat: to specify one category the channel the message
+ was send in has to be in (as defined in the Addressbook
+ with the name of the channel, including leading #).!chanCat: to specify one category the channel the message
+ was send in can NOT be in.status: to specify that the user has to have one of the
+ given status codes (case-sensitive):
+ m Moderators Subscribera Adminf Staffb Broadcastert Turbo Userg Global Moderatorr Bot as in Robot (depending on what the FFZ/BTTV APIs provides (if
+ enabled) and values in the botNames setting)M User with any kind of moderator/special powers
+ (so Broadcaster/Moderator/Global Moderator/Admin/Staff combined)status:st matches
+ all subscriber and turbo users.!status: to specify that the user must NOT have any of
+ the given status codes (see status: for codes). For example:
+ !status:stM matches all 'normal' users that have no
+ badge by default (NOT a Subscriber, Turbo User or any kind of Moderator).color: to specify a color other than the default one
+ for displaying this highlight. If you have items with a custom
+ color defined, which match something that might also be matched
+ by other items (with another color or custom color)
+ then the order of items is important so it displays the desired color.
+ Items on the top are matched first, so move items up that should take
+ precedence. For example test and
+ color:blue test2. If test is on the top
+ it will never get to the blue one, because test will
+ always match when test2 would match as well.config: to specify one or more options (seperated
+ by comma) that changes the behaviour):
+ silent - Disable sounds for this item!notify - Disable notifications for this iteminfo - This item applies to info messages instead
+ of regular user messages (works only for Ignoring messages at the
+ moment)word1 word2word1 word2, Word1 word2 anywhere in the messageword1 or only word2 anywhere in the messagew:annaAnna?, Anna :D, Anna,Wanna?, Hannah, annahuser:joshimuz cs:HelloHello anywhere in the message, if the message was sent
+ by the user named joshimuzhellocs:Hello user:joshimuzHello user:joshimuz anywhere in the messageHello, does NOT matter who send the messagecs:abc re:\w+abc re:\w+ anywhere in the messageabc test, but also NOT Abc re:\w+re:abc \w+abc testaabc testre:.*abc \w+.*abc test anywhere in the messagecolor:yellow wcs:SS:, Hello S! and makes the message
+ display in yellow colors:, Hello s!, SSSS, sssschan:lotsofs,joshimuz cs:HelloHello, but only if in
+ the channel #lotsofs or #joshimuzstatus:s chanCat:vip start:!test!test send by
+ subscribers of the channel, but only if the channel is in the
+ Addressbook category vip (e.g.
+ /ab add #joshimuz vip, notice the leading #)Allows you to ignore chat messages that match the specified text or -
+ using prefixes - that match other properties like ignoring messages of a
+ specific user. Ignored messages get added to a special dialog that can
+ be opened via View - Ignored.
+
The matching of messages works the same as the Highlights + system, please see that help for information on that. For quick + reference here just a few examples: +
+ +user:namename in all channelsuser:name chan:tirean,gocnakname in channels #tirean and #gocnakconfig:info subscribed tox has subscribed to y info messages that
+ you get when someone subscribes in the channel that is being hostedcat:ignore !chan:lotsofs,joshimuzignore in all channels,
+ except #lotsofs and #joshimuzchan:joshimuz re:!bet.*!bet, but only in #joshimuz!status:smb chanCat:subonlysubonly (e.g. /ab add #joshimuz subonly,
+ notice the leading #)Ignored dialog)The Ignored Users list allows you to ignore
+ users in chat or prevent them from whispering you, which is possible via
+ the main ignore list as well, but was added as a separate function to be
+ more convenient. Aside from the settings, you can also ignore/unignore
+ users via the User Context Menu.
Ignored users are independant of the main ignore list, so they also apply + if ignore is disabled.
+ +You can enable or disable all sounds here. Sounds are searched in the
+ displayed folder, which is the current working directory. Any valid sound
+ files in the folder should be selectable as a sound to be played. If you
+ added or removed files, you may have to use Rescan folder to
+ make the files show up in the list. You can open the folder in your standard
+ file browser from here to add files to it more quickly.
You can specify requirements, soundfile, volume and delay for + different types of events:
+You can set a delay (seconds) so that the same sound won't be played twice during + the set number of seconds. So if e.g. 3 highlighted messages come in within + 10 seconds and the delay is set to 15 seconds, only one sound will be played.
+ +Each sound has different options for when the sound should be played. See + the Notification Settings for help on the options.
+ +You can show notifications for two kinds of things:
+For both these you can select separately if and when they are shown:
+In addition, the option Don't notify about "Stream offline" allows you + to never show when a stream changes status to offline, so you will only be + notified about streams going live or changing title/game.
+ +Select here whether to use the Chatty Notifications or the default + System Tray Notifications. This settings DOES NOT enable or + disable notifications altogether, just switch between the types.
+If you have Chatty Notifications selected, you can change some + more options:
+auto means
+ it's on the same screen as the Chatty window)Enable this to make Chatty get a list of your followed streams regulary + so it can display notifications if their status changes. This simpy allows + Chatty to know about your followed streams, so notifications aren't the only + advantage. It also allows it to record the viewer count and status history + of followed live streams as long as Chatty is running.
+ +If you enable logging, chat messages (and more if enabled) will be written + into a seperate textfile for each channel.
+You can specify which channels should be logged:
+Normal chat messages are always logged, however you can log additional + information:
+[12:32:25] BAN: name, name2[12:32:25] MOD: name1, name2[12:32:25] JOIN: name1, name2[21:06:21] Viewerstats (21:03-21:06): avg:28.612 min:28.432 max:28.887 [3/28.519-87+455_]).[15:23:58] VIEWERS: 12521Main - Exit or the tray icon
+ context menu.Custom commands allow you to specify aliases for anything you could also + enter directly into the inputbox (like chat messages or regular commands), + with the exception of other custom commands, which is a limitation + implemented to prevent infinite loops. Custom commands you add should be in + the following format:
+ +/<commandName> <what the command should do>
Everything until the first space is the name of the comand, and everything + after the first space is the text of the command. For example:
+ +/hello Hello World!
If you added that to the custom commands and enter /hello
+ in the inputbox, then it would send Hello World!, just as
+ if you would have written it yourself and pressed Enter.
You can also specify parameters in the command text, which will be replaced + when you execute the custom command. For example:
+/permit !permit $$1
When you enter /permit name, then it will replace $$1
+ with the first word after the command, which in this case would be
+ name, making the actually send text !permit name.
This is the syntax for specifying parameters (word in this context means + anything seperated by a space):
+$1, $2, $3$1-$2-, $3- etc.$$1$$2, $$3- is also possible\$1-$) by prepending a backslash
+ \, which means this won't be interpreted as a parameter
+ and not be replaced\, you can escape the
+ backslash itself, for example \\$1- will be replaced
+ (leaving one backslash in front of the replaced parameter)In a context other than entering the command in the inputbox, there are + some predefined parameters. For example if you add a command as a context + menu entry (see next section), then clicking that entry will execute the + command while automatically adding an appropriate parameter.
+ +So you can for example add just /Permit to the menu, but
+ the custom command /permit !permit $$1 will actually be
+ executed as !permit <name of the user>.
| Context | +Parameters | +
|---|---|
| All | +$chan - the currently active channel (without leading #) |
+
| User Context Menu | +$1 - name of the user |
+
| User Dialog | +$1 - name of the user |
+
| Channel Context menu | +$1 - name of the currently active channel (without leading #) |
+
| Hotkey | +$1 - the currently selected user (if present) |
+
In addition, there is an implicit channel context, which means channel-aware
+ commands like /ban are executed in the appropriate channel.
You can add custom commands and regular commands to the User Context Menu (when you right-click
+ on a user in chat), the Channel Context Menu (when you right-click anywhere on the chat
+ that is not otherwise linked) and customize User Dialog Buttons (Custom Commands
+ and Timeout Buttons).
Commands can be added in the following format:
+/<commandName1>, /<commandName2>
For example:
+/Slap, /Permit
Which means the command with the name slap will be added
+ first, then permit after that. You can use spaces,
+ linebreaks and/or commas as seperators between commands.
This is the syntax for specifying commands in the Context Menus/User Dialog:
+/Slap /Permit or Slap, Permit or Slap Permit/, then the name
+ (without parameters) and space, linebreak or comma to seperate to the next command./ in front.//Slap// will put the command
+ in the special submenu More.. (for Context Menus) or
+ in a second line of buttons (for the User Dialog).| Slap or |//Slap| (vertical bar) will add a seperator before the
+ menu item for the next command.
+ The | doesn't have to be directly in front of the command,
+ it simply applies to the following command./Set_color is displayed as Set colorIn addition, you can define for the User Dialog Buttons:
+5, 2m, 10m, 24hs - seconds,
+ m - minutes, h - hours, d - days.120s, 120 is displayed as 120s and 2m/Ban[B], /Unban[U], 2s[P]+) can
+ be used instead (which will be replaced with a space automatically)./Slap[NUMPAD1|Np1], /Permit[NUMPAD2|]|) after the shortcut will use
+ the text after it up to the closing bracket as label for the shortcut on the button (no
+ spaces are allowed). If you don't specify any text, then no label is
+ used for that shortcut.nokeylabels/unhost command to your channel if you started
+ your stream session in the last 15 minutes and the stream status
+ changes (usually from offline -> live).autoUnhostStreams setting, via
+ /add autoUnhostStreams <streamName>, in order to
+ tell Chatty that you are authorized/want to use the automatic /unhost
+ feature in that channel).You can let Chatty write information (title, game, viewercount) of a
+ certain stream to a file. The file will be written to the subfolder exported of the settings directory
+ (enter /dir to find out where that is). Stream information is
+ only written if Chatty gets that data, so for it to work properly you need
+ to currently have the channel of that stream open in Chatty. (When you change
+ the setting, data will be requested once for testing, but you have to be in
+ the channel for it to be updated regulary.)
To save stream information to a file, you have to define it in the + setting. Each line represents one stream/file and the content to write into + the file. The format for each line is:
+ +<streamname> <filename> [online/offline] <content>
The optional parameter online/offline defines whether to
+ write the given content to the file when the stream is online or offline. So
+ you could for example define one line for online, which writes the viewercount
+ and another for offline which writes "Offline" or maybe no content at all, which clears the file.
+ If you only define one for online, then
+ the file is not written if the stream is offline, so the previous info will
+ stay in there. If you ommit this parameter, then online is assumed.
The following codes in the content will be replaced with the appropriate data:
+%title - The title of the stream%game - The game of the stream%viewers - The current viewercountExample which will write two files (if joined to #joshimuz):
+
+
+ joshimuz title.txt %title (%viewers Viewers)
+
+ joshimuz title.txt offline Stream offline
+ joshimuz game.txt %game
+ joshimuz game.txt offline
+
If the stream is online, it writes the title and viewercount to title.txt
+ and the game to game.txt.
+ If the stream is offline it writes "Stream offline" to title.txt and empties
+ game.txt.
These settings should only be changed if you know what you're doing. You + can however reset any setting to the default by either deleting the settings + file or using setting commands.
+ +6667,443)The server/port values are used when connecting, unless the commandline
+ parameters -server and/or -port are used,
+ then the value that is given there is used instead (without it being shown
+ here). You should know if you set a server or port with a commandline
+ parameter, but you can also check that by using /get server
+ and /get port.
The Twitch Client Version setting has been removed since Twitch Chat was + switched over to IRCv3 tags and commands (receiving of joins/parts is now + controlled by the Correct Userlist setting).
+ +You can add hotkeys for certain actions. In general, there + are the following types of hotkeys:
+With the Enable global hotkeys setting you
+ can enable/disable the currently defined global hotkeys if your
+ Chatty version supports global hotkeys. It does not do
+ anything on it's own, it just toggles global hotkeys you defined
+ on and off, in case you only need them sometimes and they
+ interfer with other programs you use. You can also toggle that
+ setting in the main menu under Extra - Options or
+ use setting commands to change the globalHotkeysEnabled
+ setting directly.
If a dialog pops up that tells you that global hotkeys + have not been properly initialized, check out the + Troubleshooting page.
+ +When adding or changing a hotkey you have the following options:
+Custom Command,
+ you have to enter the command to perform in the field below
+ (just the name of the command, see Commands).50 will execute the
+ action only once per 5 seconds, even if you keep the hotkey
+ pressed. This can be useful for actions you normally would
+ only want to execute once (e.g. running a commercial,
+ sending a message to chat) and
+ that you don't want to spam by accident.TAB Completion allows you to write the beginning characters + of a nickname in chat and then press TAB to complete it. To learn how to + use TAB Completion check out the general help.
+ +Custom Completion allows you to add terms and their completion, + allowing you to not only complete names in chat (TAB) or emotes + (Shift-TAB) but also custom stuff you added to the list by prepending the term with a + point and using Shift-TAB.
+ +Example: Add chatty as Key and
+ http://chatty.github.io as Value
+ and then in the inputbox type .chatty (notice the dot in front) and press
+ Shift-TAB to complete it to the URL.
Custom Completion items can only have one completion, so you
+ can't have .chatty complete to several things
+ as it could be the case with a nickname.
Besides the Settings Dialog, you can also use the
+ /customCompletion command to modify custom
+ completion items:
/customCompletion add <item> <value> - Add an item/customCompletion set <item> <value> - Change an item that already exists/customCompletion remove <item> - Remove an itemRemember that you can also use TAB Completion for commands. Kappab
+ + + diff --git a/help/0.8.2/help-short_guides.html b/help/0.8.2/help-short_guides.html new file mode 100644 index 0000000..983ed6b --- /dev/null +++ b/help/0.8.2/help-short_guides.html @@ -0,0 +1,157 @@ + + ++ Local Subscriber-Only Mode | + Chatty for Streamers | + Join Eventchat +
+Probably shorter guides about some aspects of Chatty.
+You can create your own local subonly mode, which ignores all messages + written by non-subscribers.
+ +Features used: Ignore System, Addressbook, + Custom Commands
+ +Go to Main - Settings - Ignore and make sure Enable Ignore
+ is ticked. Then add to the list (press the Plus-Button):
!status:smbaf chanCat:subonly
The !status:smbaf prefix matches on messages send by users that
+ don't have any of the status levels defined, in this case users
+ that are neither a subscriber (s), moderator (m), broadcaster (b),
+ admin (a) or staff (f). So basicially this only matches on normal users.
The second requirement for a match is the chanCat:subonly
+ prefix, which refers to the channel category subonly, which
+ means the channel the message was send in needs to have that Addressbook category.
+ This is used to be able to easily toggle subonly-mode for a channel, and
+ of course to prevent it being enabled in all channels you join in the
+ first place.
To make use of the Ignore Entry defined in the previous section, you need
+ to add the subonly category to the channel you want to have
+ it enabled for. To do this, you could open the Addressbook Dialog
+ (Channels - Addressbook) and add the channel with the
+ category there (channels need a leading # in this case, so e.g. #joshimuz).
You can however also use Addressbook Commands:
+/ab change #joshimuz !subonly
This toggles the subonly category for the given channel, so
+ when the category is there, it removes the category, and when the category is not there,
+ it adds the category.
To do this a bit more conveniently, you can add it as a custom command. Go
+ to Main - Settings - Commands and add the following to the
+ list:
/Toggle_Subonly /ab change #$$1 !subonly
If you enter /Toggle_Subonly joshimuz, this will automatically
+ run the Addressbook as mentioned above ($$1 means this is
+ being replaced with the first word after the command).
To make this more convenient (entering the command with the correct channel
+ could be a bit of a hassle), add the Custom Command to the Channel Context Menu
+ (on the same page in the settings). Just click on Edit and add
+ the command name (without any parameters):
/Toggle_Subonly
Now if you right-click on a channel, the context menu that opens should
+ have an entry Toggle Subonly, which you can
+ use to turn your own local subonly mode for the current channel on and off.
<View - Channel Info> to see your current
+ stream title/game, a graph of your viewercount and how long your current
+ stream already is going.<Extra - Followers/Subscribers> dialog
+ to view your 100 most recent Followers/Subscribers and some stats based
+ on that.<View - Channel Admin> dialog to change
+ the title/game of your stream and run commercials:
+ Settings - Window - Always show chat scrollbar, so you can always capture the same
+ region, independant of how many messages are in the chat window./set font Arial Bold./clearchat
+ command (e.g. if you changed some settings before starting the stream
+ you don't want to show).As of March 2016 Twitch doesn't use separate Event Chat servers + anymore.
+ + +When you join a channel of a big event and you don't receive any (or few) messages, + it's possible that the channel is on the Event Chat servers, not the + regular Twitch Chat servers. It's a common problem to run into if you're + not using the website (like any regular IRC client, Chatty and possibly + mobile).
+ +In order to join Event Chat in Chatty, you have to connect to a different
+ server. See Twitchstatus.com for an (unofficial) list
+ of servers (make sure you choose the Event Chat tab and use
+ a server/port combination that is marked as irc in the
+ Protocol column).
Since Chatty can only connect to one server at a time, you either have + to only join channels that are on the Event Chat servers, or run two + seperate instances of Chatty at the + same time.
+ +There are different ways of connecting to a different server:
+/server <host>[:port] command connects to the given server and
+ port manually (for example /server irc.twitch.tv:443,
+ replace with an Event Chat server accordingly).-server and -port commandline options
+ allow you to specify a different server when you start Chatty.Server and Port settings in the
+ Settings Dialog under Advanced allows you to set
+ fixed settings for the server to connect to. This especially makes sense
+ if you are using seperate settings for different instances of Chatty.If you want to switch between servers sometimes, you can create a
+ custom command to connect to Event Chat so you don't have to enter
+ the command with the IP and port manually every time. Go to
+ Settings - Commands, add a new Custom Command and enter:
+ /eventchat /server <server>:<port> (replace
+ with the appropriate IP and port of course). Then you
+ can just enter /eventchat in the inputbox (while not
+ being connected) and it will connect to Event Chat and if you want to
+ connect to regular Twitch Chat just connect regularly via the menu
+ (and it will use irc.twitch.tv if you didn't change the
+ server settings).
SpeedRunsLive is a platform + dedicated to speedrunning and racing (live speedruns against other players). + Chatty has an integrated race viewer, which lists all the current races.
+ +Open the race list via SRL - Race List, which shows the
+ current races. Right-click on a race to open a contextmenu with several
+ options, double-click on a race to open the Race Info dialog.
Notice that the race list isn't automatically updated, unless you have + a Race Info dialog open (which is automatically updated in a regular + interval). If you want actual real-time information on races, joining + the SRL IRC is a good option. The integration in Chatty is mainly supposed + to make opening/joining race related stuff easier and to give a quick and + easy overview of who is in a race you are watching (without having to open + a website).
+ +Use SRL - Races with.. to find races that the stream of
+ the currently active channel you have joined is part of. This will basicially
+ take the stream you have clicked on, search through all the current races
+ and list all the races that have an entrant that has that stream set. If
+ there is only one matching race, and you currently don't have the Race Info
+ dialog open, then it is immediately opened. Otherwise the matching races are
+ listed for you to select.
You may want to check if Irc logging is enabled in the Debug Window
+ (Extra - Debug window - Checkbox: Irc log), which should
+ be disabled by default, but can lower performance if checked.
First of all, you only need Global Hotkey support when you want to use + global hotkeys (which you can define in the settings). If you don't, you + can just ignore any related messages or download the version of Chatty + without Hotkey support. Global hotkeys currently only work on Windows.
+ +If you want to use global hotkeys and you get a message related to them + not working, check the following sections. If you don't get a message, + but the global hotkeys you defined just don't work, make sure you + actually have global hotkeys enabled in the settings.
+ +If you try to add a global hotkey and it tells you that you have the
+ wrong version of Chatty, you probably don't have the version supporting
+ global hotkeys. Download the version that contains hotkey
+ in the .zip filename and try that instead.
Chatty requires the jintellitype-1.3.8.jar to be in the
+ lib subfolder of where the Chatty.jar is
+ located.
If you get this error, you started Chatty with Hotkey support, but it + couldn't load the library (.dll) necessary to register hotkeys. This can + mean that: + +
.dll)JIntellitype.dll isn't stored where the program can
+ find it
+ Find out if you have the 64bit or 32bit version of Java (e.g. by
+ entering java -version on the commandline to check if there
+ is 64bit in the response), then check if you downloaded the matching
+ version of Chatty.
Enter /wdir in Chatty to find out what your working directory
+ is and make sure the JIntellitype.dll is in there. If you
+ are starting Chatty via a shortcut, remember that the directory
+ specified in the Run in field determines your working
+ directory (on Windows at least, but global hotkeys are currently Windows only
+ anyway).
See the Chatty Livestreamer Help.
+ +If you loose your settings (or part of it like just the Addressbook) then + either they weren't saved/loaded properly for some reason or you changed + your configuration and your settings directory is not the same anymore.
+ +/dir in Chatty to find out what your settings
+ directory is (/openDir to open it) and whether that's
+ the one you used before (there should be quite a few files and
+ folders).backup folder you can try to restore the
+ automatic backup. More Information...The image/sounds folders are based on the current Working Directory, + which is set when you start Chatty. More Information..
+ +If you repeatedly get disconnected because of possibly invalid login
+ data, please go to Main - Login.. - Verify login.
+ This will send a request to Twitch to check if the access token is valid.
+ If the login data is valid, then Twitch may just have temporary problems
+ and you should try again later. The same goes for when the check itself
+ fails because it can't reach the Twitch API.
If the login data isn't valid, you can just remove the login and request + new login data. Also see the section about login + for more information about invalid logins.
+Another reason may be that you are connecting to the wrong port.
+ +It's possible that your internet/firewall doesn't like the port you are
+ using to connect. By default it tries to connect to 6667
+ first. Twitch may also have changed the ports. You can check Twitchstatus.com
+ (not an official Twitch site) which chat server/ports are available (make sure to use an irc server).
+ The host irc.twitch.tv should resolve to the available server IPs, so you normally
+ shouldn't have to enter an IP directly (for main chat).
If you are using a shortcut to start Chatty, also check any + custom server/port you may have defined there using commandline parameters.
+ +If Java encounters a character that is not contained in the chat font
+ you currently have configured, it will try to find it in the fallback
+ fonts. While still not all characters will be displayed this way, it
+ should work a lot better. If you want to be able to display even more
+ characters, you can add your own fallback fonts into the Java fallback
+ font directory: <JRE_INSTALL_DIR>/jre/lib/fonts/fallback
On Windows, the JRE would usually be located in
+ C:\Program Files\Java\ or
+ C:\Program Files (x86)\Java\.
Note: If you set the inputFont
+ setting to something else
+ besides a Java logical font, then the font fallback mechanism may break.
+ This was the case before version 0.7.3.
You need to have at least Java 7 JRE (Java Runtime Environment) installed to run Chatty.
+If you try to start Chatty by double-clicking the Chatty.jar,
+ first make sure that .jar files are associated with Java,
+ and not some other program like WinRAR. The icon of the Chatty.jar
+ should have a Java icon (coffee cup). If you right-click the Chatty.jar
+ you can select the program to open it with under Open with.
If you are sure that the Chatty.jar is actually started with
+ Java, but no program window appears, it may be that an error occured before
+ the window (GUI) could be created.
Running Chatty from the commandline has the advantage of being able to + get messages from before the GUI is established. It also may work when Java + isn't integrated into the OS correctly (but is installed).
+ +Chatty.jar is located
+ Chatty.jar is located. Click on Open
+ command window here in the context menu.java -jar Chatty.jar
+ and press Enter.When you enter the above command and Chatty starts correctly (but doesn't
+ when you double-click the Chatty.jar), this may mean that
+ Java isn't integrated into the OS properly. You can create a
+ shortcut or a .bat-file to
+ start Chatty similiar to entering the command above, but much more
+ conveniently.
If Chatty doesn't start when you enter the above command, check the + commandline window for error messages. + Send a screenshot of the commandline + window along with information on what other things you tried if you + require further assistance with it.
+ +If the integration of Java into the OS may not be correct, and you want + to try to fix it, you can try this.
+ +Open a commandline window and enter assoc .jar which should output
+ .jar=jarfile and enter ftype jarfile which should
+ output something like "C:\Program Files\Java\jre7\bin\javaw.exe" -jar "%1" %*
+ (see also
+ Could not find the main class. Program will exit.)
If you experience this when entering java -jar Chatty.jar
+ in the commandline, then it probably can't find Java because it's not in the
+ PATH environment variable (that defines where to look
+ for programs of which only the filename has been entered, not the whole path).
You can enter PATH in a commandline window to check what is
+ in it. It should show a list of semicolon-seperated directories, one of which
+ should point to Java.
See next section. Of course you'll have to navigate to the folder + manually.
+ +If you experience any problems or errors, then there may be helpful + information for debugging in the debug log, which is located in the settings + directory:
+<user_dir>/.chatty/debuglogs/
+ (Example: C:\Users\<username>\.chatty\debuglogs\)
If you have Chatty running you can enter /openDir to open it
+ or /dir to output the path, then simply navigate to the
+ debuglogs subfolder.
In that folder, there are two kinds of debug files:
+debug.log which is overwritten everytime you start
+ Chatty. It may also have a number at the end (like debug.log.1)
+ if Java couldn't open the usual debug.log.debug0.log, debug1.log, ..), whereas
+ one of them is written to at a time, and then switched to the next when
+ a certain filesize is reached, rotating between a certain number of files.
+ Those files are not overwritten when Chatty is started, but instead new data is appended.So to find possibly relevant data:
+debug.log first.debug0.log, debug1.log, ..
+ files could contain the necessary information, based on the last
+ modification dates.
+ Contact me please.
+ + + + + + + + + + diff --git a/help/0.8.2/help-whisper.html b/help/0.8.2/help-whisper.html new file mode 100644 index 0000000..e94fae5 --- /dev/null +++ b/help/0.8.2/help-whisper.html @@ -0,0 +1,110 @@ + + ++ Settings | + Usage | + Troubleshooting +
+ +Chatty implements the /w command that Twitch Chat
+ provides, allowing you to send private messages in chat to other users.
+ Chatty does not provide the Whisper History as on the website and is
+ only a very basic implementation in general.
The Whisper Feature is disabled by default.
+ +In April 2016 Twitch moved Whispers from the Group Chat servers to the + new AWS Twitch Chat servers. There is no additional server configuration + required anymore.
+ + +whisper will be able to send whispers to you.
+ Messages from other users are discarded. Alternatively you can
+ also blacklist users by adding them to the
+ blockwhisper category (which makes most sense with
+ the Whitelist setting disabled).Miscellaneous - Ignore (whisper). Unlike
+ the Blacklist or Whitelist using the Addressbook, this will not
+ completely discard the messages, but instead add them to the
+ Ignored Messages dialog and possibly output some other messages
+ about it, depending on the Ignore settings.<name>
+ <message> instead of having to use the
+ /w command. To be sure you actually provide
+ the user to send it to you can only whisper to users
+ that have already whispered to you (so e.g.
+ Hey how are you? :) wont't be send to the
+ user named Hey). The tab for collecting all
+ whispers is named $[whisper].$<username>.[Auto-Message] This user has not
+ allowed to receive whispers from you.. The message is
+ only sent once per session to each different user that whispers
+ to you and is also spam protected.When the Whisper Feature is connected ([W] appears in the
+ titlebar) you can receive and send whispers:
-[name]-/w <name> <message>, then this will be
+ indicated in chat by the nickname being marked like this:
+ >>[name]/me).| + General usage + + + Chat basics + + + Chat moderation / utility + + + Chat customization + + + Stream features + + | +
+ Settings / Files
+
+
+ Miscellaneous
+
+
+ Guides
+
Also check out the official + YouTube Channel + with guides and stuff. + |
+
+ When in a channel, Chatty shows some information about that channel
+ in the titlebar, e.g.:
[40|59] - GTA:SA Speedruns (Grand Theft Auto: San Andreas)
The first number is the number of people in the chat, the second is the + viewercount, followed by the current stream title and game. Anything other + than the number of people in the chat is requested from the Twitch API about + every two minutes.
+ +In addition, the titlebar will also show additional information, if enabled:
+Sub for Subscriber-Only ModeSlow: <time> for SlowmodeR9k for R9Kbeta ModeYou can toggle showing some information under View - Options - Titlebar.
You can customize some shortcuts/hotkeys in the settings.
+Default shortcuts which can't be changed:
+The following are more default shortcuts, however these can be changed + in the settings:
+All command names are case-insensitive. Something like <parameter>
+ represents a required parameter which must be entered for the command to
+ work properly (you don't enter the surrounding < >,
+ they are just there to show it's a parameter). Equivalently [parameter]
+ represents an optional parameter.
Chat commands:
+/me <message> - Send an action message (* nickname says something) to the channel/to <nick> [time] - Timeout the user with the given nickname for "time" seconds (time is optional)/timeout, /ban, /unban,
+ /slow, /slowoff,
+ /subscribers, /subscribersoff,
+ /clear, /mods, /host,
+ /unhost, /color
+ just like in normal Twitch Chat/join <channel> - Joins the given channel/part or /close - Leaves the current channel/reconnect - Disconnects and reconnects/fixMods - Temporarily fixes the list of mods (like
+ /mods but without showing the list of mods in chat)/ignore <user>, /unignore <user> - To ignore/unignore user (chat and whisper)/ignoreChat, /unignoreChat, /ignoreWhisper, /unignoreWhisper
+ - To ignore/unignore user only from chat/whispering youInfo commands:
+/connection - Show info about the current connection/uptime - Shows how long Chatty has been running/appinfo - Shows Chatty uptime and current memory stats/dir - Show the directory the settings (and other stuff) are saved in/wdir - Show the current working directory/openDir - Opens the settings directory in your file browser/openWdir - Opens the current working directory in your file browser/testNotification [channel] - Display a test notification (optionally with channel,
+ which means right-clicking on the notification will join that channel)/myemotes - Show your subscriber emote codes (only works if you
+ have joined any channel before, this is only a quick info, better emote
+ integration maybe to be implemented later)/ffz, /ffzGlobal - Shows the FFZ channel emote codes for the current channel/global FFZ emotes/releaseinfo - Opens the help with the release informationOther commands:
+/clearchat - Clears the current chat window of all text/setcolor <name> - Opens the usercolor settings
+ for the given name/echo <text> - Outputs the given text as a info message/copy - Copies the given text to the clipboardGUI commands:
+/settings, /livestreams, /channeladmin,
+ /channelinfo, /search, /openFollowers,
+ /openSubscribers - Opens the according dialog/insert <text> - Inserts the given text into the input box at
+ the current caret position (can be useful for Custom Commands put
+ in a menu)/insertword <text> - Same as /insert,
+ but adds spaces so it's seperated from text before and after (if present)/openUrl <url> - Opens the given url/openUrlPrompt <url> - Open the given url after
+ showing a prompt for confirmationAdvanced commands (not recommended for use unless you know what you do):
+/server <host>[:port] - Connect to a custom server/raw <command> - Send a raw command to the server/refresh <emoticons/badges/ffz/ffzglobal/bttvemotes/emotesets>
+ - Refresh the given data from it's respective API:
+ emoticons: Twitch Emotesbadges: Twitch Badges (current channel)ffz: FFZ Emotes (current channel)ffzglobal: Global FFZ Emotesbttvemotes: BTTV Emotes (global and current channel)emotesets: Association between emoteset and
+ channel name, to display Twitch Subemotes info correctly
+ (twitchemotes.com API)/changetoken <token> - Checks if the given token
+ is valid and sets it as new token if it isThe login data consists of a username (or account name) and most + importantly an access token, which is sort of a revokable + password that can also have different types of access associated with + it, the ones usable for Chatty being:
+ +Chat accessRead user infoEditor accessRun commercialsShow subscribersOnce requested from Twitch, the login data is stored locally on your + computer along with the other settings of Chatty. + Since Twitch gives out the + access token per application, any access token for the same account + requested with Chatty will be invalidated when you request a new access + token. (This doesn't seem to be the case anymore.)
+ +If getting login data fails, read this guide. + If your login was determined invalid, read down below.
+ +To allow Chatty more access than it already has (e.g. if you haven't
+ selected editor access before, but you want it now), you need to request
+ a new access token. Just go to <Main - Login..>,
+ delete the login and request it again with the necessary access.
To allow Chatty less access than it already has (e.g. you don't want it + to have editor access anymore) you need to first revoke access + completely in your Twitch Account + Settings, then + authorize access again. What will not work is just requesting a new + token without selecting the now unwanted access. Twitch will always + respond with a token that has at least as much access as the previous + one.
+ +The access token is saved in the login file in the settings
+ directory and can thus be accessed
+ by anyone having access to your computer.
+ It allows anyone who obtains it to chat in your name and access the other
+ things listed above (if you allowed it when getting the token). If you think
+ the token may have been compromised, please immediately go to your Twitch
+ Settings subsection
+ Connections
+ and revoke the accesss there. You can then request a new one for
+ which Twitch will ask you to authorize Chatty again.
If your login is determined invalid (either by checking it manually or + when Chatty performed an automatic check), this can mean one of two things:
+What happens when your login is no longer valid:
+How to proceed:
+<Main - Login..> to open the Login configuration
+ and click on [Verify login].<Main - Login..> to open the Login configuration
+ (unless you are already there), [Remove login] and create
+ a new login.There are a few special symbols that are used for users in chat. These + are displayed in the userlist and - if usericons are disabled - also in chat.
+FrankerFaceZ provides a custom + mod icon for some channels. You can disable this in the settings if you + want to keep the default one for all channels.
+ +The userlist on the side of the channel shows all users currently + considered to be in the channel.
+ +In order to receive JOIN/PART messages, the setting Correct Userlist
+ under Settings - Advanced - Connection has to be enabled.
JOIN/PART messages are sent in batches and can be pretty delayed. So if + someone joins the chat, he may only appear as joined after e.g. 15 + seconds. If you want to use this to directly react on stream to someone + joining, then including stream delay your reaction may be e.g. 30 + seconds too late (possibly longer). The user may even have already left + the channel again, but it just doesn't show yet.
+ +The userlist can also take some time to initially load after you join a + channel, or not load at all sometimes.
+ +Also note that the userlist doesn't necessarily have to do with who + watches your stream. A user can be logged into chat without watching the + stream and vice versa. Overall, just don't take the userlist too + seriously.
+ +When you type in the inputbox, you can TAB-complete different types of + things:
+/ (using TAB, e.g. /sub then TAB to complete to /subscribers)Datsh then Shift-TAB to complete to DatSheffy)There are a couple of settings + that change the behaviour of the TAB Completion.
+ +How the TAB Completion process works:
+ +The found matches are all ordered alphabetically, except for nickcompletion + for which you can choose different types of sorting. By default nicknames use + predictive sorting, which means users who recently wrote a message or highlighted + you have a higher priority, increasing the chance that the users you want to + address appear as the first few matches.
+ +z in the editboxze_tt
+ with two other resultszMASKm by:
+ zMASKmzeblover
+ and Shift-TAB again to cycle to zMASKmdat in the editboxDatHass with two other resultsDatSheffy by:
+ DatSaunce
+ and TAB again to cycle to DatSheffyDatSheffyChatty provdes an input history for the chat input box that allows you to + call up lines you entered previously, to make it easier to e.g. repeat + commands with similiar parameters, repeat messages you send to chat or just + look up what you wrote before. You can even save messages to the history + that you haven't send yet to be able to send them later.
+This does not apply anymore since Twitch changed their system to use + IRCv3 capabilities. Joining several channels does not have any drawbacks.
+ +If enabled, the history automatically saves channels you join and when + you last joined them. By default channels expire from the history after + 30 days of not joining them (can be changed).
+You can also add channels from the history or any + you enter manually to the favorites, which will always be kept until you + remove them yourself.
+ +The highlight system allows you to add words or phrases that make chat
+ messages appear in another color and appear in a seperate window, which you can
+ open under View - Highlights (you can clear the highlights window
+ in it's context menu).
The ignore system works very similiar to the highlight system, just that
+ it hides messages instead of highlighting them. They however also get
+ added to a seperated window, which you can open under View - Ignored
+ (you can clear the messagess in the window in it's context menu).
Right-click on a user in chat to open the User Context Menu, where you
+ can ignore or unignore that user from the Miscellaneous
+ submenu. You can view and edit the list of ignored users in the settings.
The color of a user is displayed in the User Info Dialog. Color Names + are used where possible, HTML Color Codes are displayed in the Tooltip. + Colors with asterisk (*) are default colors (the user hasn't set one + or hasn't said anything during this session yet). A color in parentheses + means it's the original color, while the other color is the corrected one + that is actually displayed.
+Chatty attempts to make colors more readable automatically by changing + them to increase contrast. This doesn't work very well though, although it + should work for extreme cases like white on white or black on black.
+ +You can also specify custom colors for certain users or types of users + in the settings. Custom colors are indicated by two asterisks (**) in the + User Info Dialog.
+ +Chatty supports the default Twitch Emoticons (Normal/Turbo/Subscriber), + which should work the same as in normal Twitch Chat. It however also + supports FrankerFaceZ, a custom + set of emotes that is normally made available in normal Twitch Chat by use of browser + extensions. It also supports BetterTTV emotes.
+ +You can enable/disable Emoticons in general (displaying the icons instead
+ of the text) in the settings under Emoticons. You can also
+ ignore specific emotes in the same place in the settings.
In chat you can right-click on an emoticon to show some info about it.
+ Click on the emote code (e.g. FrankerZ) in the context menu
+ to insert the emote in the inputbox. If it is a subscriber emote, you
+ also have some more options.
Use Extra - Emoticons or press Ctrl-E to open
+ the Emote Dialog, which has various pages:
Favorites page lists emotes you have added to the favorites
+ via the Emote Context Menu (right-click on an emote in the dialog or chat and
+ choose Favorite, emotes that already are favorited can be
+ removed from favorites the same way).My Emotes page lists the emotes you paid for (Subemotes/Turbo).Channel page lists the emotes that are specific to the current channel
+ (FFZ and BTTV, if there are any). It also includes
+ the subscriber emotes of the current channel (if it has any), whether you
+ can use them or not (but it displays a message if you are not subscribed).Twitch page shows all free global Twitch emotesOther page shows all global FZZ/BTTV emotesClick on an emote to insert it into the current channel inputbox. Double-click + on an emote to also close the Emote Dialog in the process, or press ESC or + Ctrl-E to close it. Right-click on an emote to show a context menu + with some more information/options.
+ +Right-click on an emote and choose Show Details to open the
+ Detail View in the Emote Dialog, which shows the emote in different sizes
+ and some information about it. Clicking on an emote in chat also opens the
+ Detail View.
Note that you need to have joined at least one channel for your subemotes/turbo emotes + to show up, because only then does Twitch Chat send that information to the client.
+ +You can add your own local emotes by creating a file called emotes.txt
+ in the settings directory (enter /dir in Chatty to find the
+ settings directory, /openDir to directly open it). The
+ file can have one emote on each line, for example:
+D: aww.png size:18x18 +re:Gr[e|a]yface Kappa.png +# Switching Kappa and MiniK +Kappa http://static-cdn.jtvnw.net/emoticons/v1/3287/1.0 +MiniK http://static-cdn.jtvnw.net/emoticons/v1/25/1.0 set:793 id:3287+ +
This can be used to replace existing emotes, since custom emotes are + checked first and thus take precedence. This is not intended to replace + FFZ or BTTV emotes, just to help configure emotes to your personal + preference. For example you could also add an image for you own name to + have it highlighted in chat in a different way.
+ +The syntax per line is (you can use as many spaces or TABs as seperators as you want):
+ +[settings] <code> [settings] <image> [settings]
Settings can be in any of the shown places, but are always optional. Available settings are: +
+ +set:<setid> to specify a
+ Twitch emote set. This will only affect messages you write yourself.id:<emoteid> to specify a Twitch emote id to
+ replace. This will only affect incoming messages.chan:<channel> to restrict the emote to the
+ given channel.size:<width>x<height> to specify the
+ size of the emote (you can omit this if you want to use the image
+ size).Required:
+re:
+ to specify a regular expression. Otherwise it is interpreted as plain text
+ (the same as regular Twitch emotes, case-sensitive and usually separated
+ by space from other characters).emotes.txt in), so just put them in the same directory.
+ You should also be able to use URLs to load the image from the internet.Lines starting with # are ignored and can be used for comments.
The emotes.txt file is loaded when you start Chatty, so if you edit the file
+ while Chatty is running, you have to use the /reloadCustomEmotes
+ command for it to take effect.
+ Emote images may be cached, so if you change the image, you MAY have to
+ clear the cache (/clearemotecache CUSTOM).
This has been moved to it's own page
+ +With this feature, you can select a user in chat with keyboard shortcuts + (if the window is active). So you can e.g. timeout a user with your keyboard + alone.
+ +Press Ctrl-Space (can be changed in the settings) to enter + this mode. If there are any user + messages in chat, then the newest message will get another background color + which shows that it is selected. In that mode, the focus is on the textpane, + which enables more shortcuts:
+When you move up and down, it actually switches to the next user instead + of to the next line. So if the same user send 10 messages in a row, it will + jump to the first message of the next user above it.
+ +In addition to the currently selected message, it will also highlight all + other messages by the same user. You can also hold AltGr and + click on a username in chat to highlight all that users messages (and enter + User Selection Mode).
+ +You can also click and hold in an empty area of the textpane, which puts + and holds the focus there, so you can just use the shortcuts in the list + above to enter the User Selection Mode and switch between messages. However + if you let go of the mouse key, it will immediately leave the mode again.
+ +You can also configure global hotkeys with some User Selection actions. + However, if the focus is not on the chat, then the usual shortcuts won't + work, so you'll have to define additional global hotkeys to e.g. timeout the + currently selected user. See the hotkey settings for what actions are + available.
+ +Stream Chat is a seperate dialog, opened via the /openStreamChat
+ command or the Extra menu, that can have chat messages from one or several
+ channels redirected to it (only regular chat messages, so no JOINS/PARTS, info messages
+ and so on). It also can have a message timeout set, so messages will
+ disappear after a certain amount of seconds.
The idea is to capture Stream Chat to display chat on stream and + messages will only be displayed if the chat has been recently active. So + this doesn't really make a lot of sense for busier channels, unless you + simply prefer to only have regular messages or to have a seperate dialog + for the capture.
+ +You need to add the channel which messages are redirected to the
+ Stream Chat dialog before anything will appear. The setting you are required
+ to change is streamChatChannels,
+ which is a list setting giving you different ways of editing it:
/set streamChatChannels #<channel> - To set
+ the channel to only this one/add streamChatChannels #<channel> - To add
+ a channel in addition to the ones already set/remove streamChatChannels #<channel> - To remove
+ a channel from the listCheck out other settings that are also edited with setting commands.
+In addition, make sure you have Settings - Window - Restore dialogs
+ set to at least Restore dialogs from last session in order
+ to keep the position/size of the Stream Chat dialog between sessions.
/openStreamChat - Opens the Stream Chat dialog/setStreamChatSize <width>x<height> - Set the exact size of the Stream Chat dialog in pixels/getStreamChatSize - Shows the size of the Stream Chat dialog in pixels/clearStreamChat - Removes all messages/streamChatTest [message] - Adds a test message to the Stream Chat dialog, if you don't specify a message
+ a default one is usedYou can give people in chat custom names that will appear in chat and + in the userlist instead of the regular Twitch username and in the User Info + Dialog in addition to the regular Twitch username. In other places (like + the User Context Menu or auto-completion) the regular Twitch username is + used.
+ +The following commands are used to set custom names:
+/setname <name> <custom name> - to set a custom name/resetname <name> - to remove a custom nameIf enabled in the settings under Main - Settings - Chat you
+ can stop the chat from scrolling down while you move the mouse over chat.
+ This can prevent misclicks when the chat is moving. The chat will resume
+ scrolling down as soon as you stop moving the mouse or move it out of
+ the chat area. When the chat is already paused, you can also hold
+ Ctrl to keep the chat paused even without moving the mouse.
Optionally, you can set it to require Ctrl being pressed in + conjunction with moving the mouse to initiate pausing. You can let go of + Ctrl as soon as pausing is started and it will stay paused as + long as you move the mouse inside the chat area.
+ +A little popup in the top-right will indicate that the chat is paused.
+ +Please note: This only works when the chat area is already filled, so the scrollbar is + actually used. In addition, there may be instances where something you + want to click will move anyway, for example if a message is deleted due + to a timeout/ban, causing other messages to move.
+ +Another way of preventing scrolling down is scrolling up. Once you are + manually scrolled up, chat will stop scrolling down automatically. + However messages may still be removed from the buffer causing the chat + to move despite it not actively scrolling down. It will stop removing + messages to get moving to a minimum as long as you keep holding + Ctrl.
+ +A certain time after not moving the scroll position, it will scroll down + automatically (unless Ctrl is still being pressed).
+ +Holding Ctrl and clicking on a user in chat can execute a ban
+ or timeout on that user. Enable this feature and define what it does in
+ the settings (Main - Settings - Chat).
It is recommended to enable the pause chat feature if you are using this, + or else misclicks could be very common.
+ +The Channel Info Dialog shows the current stream status of the active + stream. The data is requested from the Twitch API in a semi-regular interval, + so it can take some time to update.
+ +If the stream is online, the Online: 1h 30m
+ shows how long ago the stream was started. That time comes directly from the
+ Twitch API, so it is able to show the correct online time, even if you started
+ Chatty after the stream started.
If there is a time in parentheses
+ (like 1h 30m (2h)), then that time denotes how long the stream
+ was online, but including small offline periods (PICNICs) of at most 10 minutes,
+ which means that this time is more of a guess of what might be expected as
+ stream online time and also depends on when Chatty got the data (if you join
+ the channel after a PICNIC, then it won't include the time before, because it
+ never received the data for it).
The History is a graph that shows the development of the viewers + of the currently active channel and also indicates stream status changes + (online/offline/title/game) by different colors.
+Hover over points to display the stream status and viewercount + at that time. Right-click for a context-menu.
+|
+
+ There are two ways to change which time range is being displayed: +
|
+
+
+
+ |
+
The History is recorded while you have the channel open in Chatty + as well as for all followed channels, if you have that feature + enabled.
+The shown data usually fits to the available vertical space
+ (so if the min/max viewercounts were 341/403 then only this
+ range is shown). If you choose Toggle Vertical in
+ the context-menu, you can switch between the shown range
+ (min/max) and the full range (0-max).
Chatty can show Notifications when the status of a stream changes.
+ There is also a Live Streams window (Channels - Live Channels)
+ that shows the currently live streams. Both these features always include channels you have
+ joined and - if enabled - channels you have followed. Streams that are
+ no longer online, or whose channels you have left and you don't follow,
+ are added to a list that you can open in the Live Streams window context
+ menu (Removed streams..).
Chatty Notifications are little info boxes that can be shown for stream + status changes and highlighted messages. When you left-click on a notification + it is closed immediately, right-clicking closes it as well and in addition + also joins the associated channel.
+ +Chatty can request a list of streams you follow on a regular basis, so + you have both an overview of currently live streams as well as be + informed about status changes (offline -> online, title change, game change). + This is always available for streams whose channels you have joined in chat, + but with this feature enabled, this works for all streams you follow even + without joining their channel.
+This feature requires Read user info access, so Chatty can
+ request your followed streams. Read the section about login
+ to learn more about login data and access.
You can enable/disable this feature in the Settings under Notifications.
This has been moved to it's own page
+ +You can open a list of the Followers of a channel by joining that channel
+ and then opening the Followers Dialog via Extra - Followers.
+ It always opens on the currently active channel, or if you are in no channel
+ at all, your own channel.
You can open a list of your Subscribers by opening the Subscribers Dialog
+ via Extra - Subscribers. It always opens on your own channel,
+ because you can only display the Subscribers of your own channel. If you don't
+ have any Subscribers, it will simply show an empty list (and an error). You
+ also need to have selected the necessary access when
+ requesting login data.
You can save the current list to a file by right-clicking on the dialog + (not the list) and selecting the format.
+ +Both the Followers and Subscribers Dialog otherwise work in pretty much + the same way. Data is only requested as long as you have the dialog open. It + is requested in a semi-regular interval and then displays that data in the + list (and some stats).
+If followers/following is mentioned below, then the same applies for + subscribers/subscribing in the appropriate dialog.
+|
+ At the top it shows some stats: +
There are different background colors for some entries: +
The time has different colors for older entries: +
At the bottom, it shows approximately how long ago data was last received, + or a short error message if an error occured. + |
+  |
+
Everything that determines whether a follower is new or a refollow is + saved per session. So if you restart Chatty, it assumes that all followers + except from the first request are new. So if you start Chatty, open the + Followers Dialog on your channel, it will load the followers for the first + time and show none of them as new. Now if it updates a minute later, and there + are users it hasn't seen as having followed before, then it assumes these + users as new followers.
+ +Now a user of course might have been a follower for a year, then unfollow + and follow again. Chances are that Chatty won't notice that and assume a new + follower. What it however does is that it only shows each user as new follower + once per session. So if someone follows and Chatty shows that user as a new follower, + then that user unfollows and follows again, Chatty will notice that the first + and the second follow time are different, and will show this user as a refollow + (the name slightly grey).
+ +So this basicially just prevents the same user from e.g. making a sound + go off (if you have that enabled) several times just by refollowing several + times. At most that will happen once per session. Other than that + the data is mostly shown just as it comes in from Twitch. It will still + show refollows on the top of the list.
+ +Chatty can help you with creating Highlights of your stream by recording + the stream time (how long the stream has been online) using a command or + hotkey. When you add a Stream Highlight in Chatty, it is written to a file + which you can then view later.
+ +The following commands are available:
+/addStreamHighlight [comment] - Adds a highlight at
+ the current time, with a comment if you want to./openStreamHighlights - Opens the file where the stream
+ highlights are stored in your default text editor.You can also add a hotkey to add stream highlights, so you can also do it + yourself while streaming out of a game (given that global hotkeys work in + the game).
+ +The highlights are written to the file stream_highlights.txt
+ in the exported subfolder of the settings directory (which
+ you can open with the /openDir and show with the
+ /dir command).
You can also let your moderators add stream highlights
+ (!addStreamHighlight [comment]), but you first have to
+ change some settings:
/set streamHighlightChannel #<yourchannelname> to
+ allow moderators in the given channel to run the command/set streamHighlightChannelRespond 1 to send a response to
+ chat when the mod command is used (otherwise the message is just shown locally)/set streamHighlightCommand !highlight to set !highlight
+ as mod commandBoth the ignore joins/parts and Twitch Client Version 3 option have + been removed. You can now disable the Correct Userlist + setting to not get any joins/parts if you think it could improve performance.
+ +Using the /proc command you can start processes directly out
+ of Chatty. An example of where this is already integrated into Chatty is
+ starting Livestreamer, however this is a more basic implementation.
+ This is probably only interesting for advanced users.
/proc exec <command and parameters> - Try to
+ start a process on your computer./proc list - List of processes currently running out of
+ Chatty./proc kill <id> - Forcefully end the process with
+ the given id (get the id from the list of processes).Example: /proc exec notepad H:\hl.txt will start Notepad
+ and open the given file.
Note: Commands and output of the process is logged in the Debug Log which
+ is written to file and output to Extra - Debug window.
There are a few options you can launch Chatty with, that will override + settings loaded from the settings file. You need to run Chatty from the + commandline or Create a shortcut + to use these.
+ +These need to be defined after the Chatty.jar, for example:
+ javaw -jar Chatty.jar -channel lotsofs
-server <host/ip>-port <port>-user <username>-password [password]-token [token]-connect-channel <channel>-ds-cd-set:<settingName> <setting value>/set
+ command (see Setting Commands).-single [port]-single parameter with the same port (or
+ no port to use the default one) for all instances that you want to
+ have run in the same single instance mode.-channel parameter is used when
+ forwarded to an already running instance (joining the channel).This has been moved to it's own page
+ +Settings are loaded from files when Chatty is started and saved into files
+ once it is closed. By default these files are saved in a subfolder
+ .chatty of your user directory. You can also use the
+ -cd commandline parameter to use the current working
+ directory instead. You can find out which folder is used by entering the
+ /dir command.
Since Version 0.4 of Chatty, the settings are no longer saved in a single
+ settings-file, but instead several files:
login: Contains the login data, including the access
+ token, which should be kept confidential.favoritesAndHistory: Contains channel history and
+ favorites, as well as game favorites.settings: The main file, which contains all customizations
+ made to Chatty that should not be confidential or private.statusPresets: Contains status (title/game) presets
+ from the Admin Dialog.If you are referring to a specific version of Chatty, please provide the
+ actual version number, which you can find on the top of the main help page in Chatty
+ (this one if you are reading this in Chatty, otherwise go to Chatty and open
+ Help - About/Help or press F1).
Some of the resources that were helpful in the development of this program:
+Chatty is using a few libraries/resources made freely available by others:
+This application (except for the parts mentioned in the previous paragraph) + is released under the MIT License.
++ +Copyright (c) 2014 tduva + +Permission is hereby granted, free of charge, to any person obtaining a copy +of this software and associated documentation files (the "Software"), to deal +in the Software without restriction, including without limitation the rights +to use, copy, modify, merge, publish, distribute, sublicense, and/or sell +copies of the Software, and to permit persons to whom the Software is +furnished to do so, subject to the following conditions: + +The above copyright notice and this permission notice shall be included in +all copies or substantial portions of the Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER +LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, +OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN +THE SOFTWARE.+ + + diff --git a/help/0.8.2/jconsole.jpg b/help/0.8.2/jconsole.jpg new file mode 100644 index 0000000..698957c Binary files /dev/null and b/help/0.8.2/jconsole.jpg differ diff --git a/help/0.8.2/style.css b/help/0.8.2/style.css new file mode 100644 index 0000000..f88d874 --- /dev/null +++ b/help/0.8.2/style.css @@ -0,0 +1,134 @@ +body { + max-width: 700px; + font-size: 1em; + background-color: #FDFDFD; + font-family: Arial, sans-serif; + padding: 10px; + margin: 0; +} +h1 { + margin: 4px 0 5px 0; + font-size: 1.2em; + background-color: #EEEEEE; + padding: 3px; + border-bottom: 1px solid #AAAAAA; +} +h2 { + margin: 14px 0 0 0; + font-size: 1.1em; + border-bottom: 1px solid #AAAAAA; + padding-bottom: 2px; +} +h3 { + font-size: 1em; + margin: 10px 0 0 0; + padding: 0; +} +li ul { + margin-top:1px; + margin-bottom:3px; +} +li { + font-size: 1em; + margin-top: 2px; +} +.sub { + list-style-type: none; + margin-top: 0; +} +.top { + font-size: 0.75em; +} +code { + background-color: #EEEEEE; +} +cite { + background-color: #EEEEEE; +} +#backlink { + margin: 0 0 10px 0; +} + +td { + padding: 10px; +} + +table.settings { + border-collapse: collapse; + margin-top: 10px; +} +table.settings td { + padding: 3px; + margin: 0; + border: 1px solid #DDDDDD; +} +table.settings th { + padding: 0; + margin: 0; + border-bottom: 1px solid #000; +} +.setting { + font-family: monospace; +} +.settingExclusive { + background-color: #EEEEEE; +} +.settingNoCommandEdit { + color: #999999; +} +table.versionCompareTable { + border-collapse: collapse; +} +.versionCompareTable td { + padding: 2px; + margin: 0; +} +table.loginlinks { + border-collapse: collapse; +} +.loginlinks td { + padding: 2px; + border: 1px solid #DDDDDD; + text-align: center; +} +.loginlinks th { + padding: 2px; +} + +table.files { + border-collapse: collapse; + margin-top: 10px; +} + +.files td { + padding: 2px; + border: none; + text-align: left; + vertical-align: top; +} + +.moreInfo { + padding: 7px; + font-style: italic; +} +.moreInfo a { + font-weight: bold; + font-style: normal; +} +.paragraphs dd { + padding-bottom: 4px; +/* padding: 0 0 0 16px; + background-image: url(go-next.png); + background-repeat: no-repeat;*/ +} + +.defList { + margin-left: 20px; +} +.defList dt { + margin-top: 5px; +} + +.del { + text-decoration: line-through; +} \ No newline at end of file diff --git a/help/0.8.2/userdialog.jpg b/help/0.8.2/userdialog.jpg new file mode 100644 index 0000000..7f8c6fa Binary files /dev/null and b/help/0.8.2/userdialog.jpg differ diff --git a/help/0.8.2/viewerhistory_small.gif b/help/0.8.2/viewerhistory_small.gif new file mode 100644 index 0000000..b9c67e1 Binary files /dev/null and b/help/0.8.2/viewerhistory_small.gif differ diff --git a/help/help-addressbook.html b/help/help-addressbook.html index 1ddf5db..4f2b988 100644 --- a/help/help-addressbook.html +++ b/help/help-addressbook.html @@ -5,10 +5,23 @@
- Editing Locally (Commands) | - Advanced Usage (Mod Commands, Change via file) -
+The addressbook allows you to add usernames and assign categories to them, which can then be used in other places such as the Usercolor settings @@ -81,10 +94,12 @@ +
The following features are a bit more advanced and should only be used if you somewhat know what you're doing.
+You can use this to let the moderators of your channel edit your addressbook. Depending on what commands you allow them to use, this can be a powerful tool, @@ -118,6 +133,7 @@ actual response, you need to have Chatty on stream (which means the response is also affected by stream delay of course).
+This is a rather experimental feature, so it might not work reliably.
@@ -151,6 +167,57 @@ set testi ignore the file should not be necessary.Example: mIRC script to edit the Addressbook.
+ + +You can add somewhat unique categories to a setting, which means that + only one user will have that category assigned, as long as you only use + Addressbook commands to apply that category (and not the context menu or + Addressbook dialog).
+ +Use /set abUniqueCats star to set the category star
+ as unique category. That way, only one user can have that category.
+ What happens is that when using an Addressbook command like
+ /ab add Jack star, it will first remove the star category
+ from all other users and then add it to Jack.
If you want to have more than one unique category, you can separate
+ several categories by comma: /set abUniqueCats star,gold
This is an experimental feature that adds Subscribers automatically to + an Addressbook category, depending on how many months they subscribed. + This works on Subscriber Notifications in chat, so you have to be in the + channel at the time of the subscription for it to work.
+First you need to do some configuration:
+/set abSubMonthsChan #<yourchannel> - Set the
+ channel you want the feature enabled for/add abSubMonths <number> - Add one or several
+ subscription lenghts in months (repeat the command with a different
+ number to add more than one)/remove abSubMonths <number> - Remove a number
+ from the listThe months represent the categories that are automatically added. For
+ example if you configured the months as [3, 6, 12]:
.. subscribed for 3 months in a row! would add that
+ user to the 3months category.. subscribed for 4 months in a row! would add that
+ user to the 3months category.. subscribed for 11 months in a row! would add that
+ user to the 6months category.. subscribed for 20 months in a row! would add that
+ user to the 12months category.. just subscribed! won't do anythingRemember that this relies on the notification message to be in a certain + format, so this may not be the most reliable thing, especially if Twitch + decides to change the message in some way.