backupninja/handlers/sys

# -*- mode: sh; sh-basic-offset: 3; indent-tabs-mode: nil; -*-
#
# this handler will save various reports of vital system information.
# by default, all the reports are enabled and are saved in /var/backups.
#
# (1) a list of all the packages installed and removed.
#     this file can be used to restore the state of installed packages
#     by running "dpkg --set-selections < dpkg-selections.txt
# 
# (2) the partition table of all disks. 
#     this partition table can be used to format another disk of
#     the same size. this can be handy if using software raid and 
#     you have a disk go bad. just replace the disk and partition it
#     by running "sfdisk /dev/sdb < partitions.sdb.txt"
#     (MAKE SURE YOU PARTITION THE CORRECT DISK!!!)
#
# (3) hardware information. 
#     write to a text file the important things which hwinfo can gleen.
#

if [ -f /etc/debian_version ]
then
   os=debian
   debug "Debian detected"
   osversion="/etc/debian_version"
elif [ -f /etc/redhat-release ]
then
   os=redhat
   debug "Redhat detected"
   osversion="/etc/redhat-release"
else
   warning "Unknown OS detected!"
fi

getconf packages yes
if [ $os = "debian" ]
then
   getconf packagesfile /var/backups/dpkg-selections.txt
   getconf packagemgr   `which dpkg`
   getconf packagemgroptions " --get-selections"
elif [ $os = "redhat" ]
then
   getconf packagesfile  /var/backups/rpmpackages.txt 
   getconf packagemgr	`which rpm`
   getconf packagemgroptions	" -qa "

   getconf SYSREPORT `which sysreport`
   getconf sysreport_options " -norpm "
else
   getconf packagesfile /var/backups/unknownOS.txt
fi

getconf partitions yes
getconf partitionsfile /var/backups/partitions.__star__.txt

getconf hardware yes
getconf hardwarefile /var/backups/hardware.txt

getconf sysreport yes
getconf sysreportfile /var/backups/sysreport.txt

getconf SFDISK `which sfdisk`
getconf HWINFO `which hwinfo`
getconf sfdisk_options ""
getconf hwinfo_options ""

# See if vservers are configured
local usevserver=no
if [ $vservers_are_available = yes ]
then
   info "vserver method enabled"
   usevserver=yes
fi

## PACKAGES ##############################

#
# here we grab a list of the packages installed and removed.
#

if [ "$packages" == "yes" ]; then
	if [ $usevserver = yes ]
	then
		nodpkg="lost+found|ARCHIVES"
		info "vserver root directory set to: $VROOTDIR"
		for vserver in $found_vservers
		do
			info "examining vserver: $vserver"
			running=`$VSERVERINFO $vserver RUNNING`
			if [ "$running" = "1" ]; then
                           if [ ! -x "$VROOTDIR/$vserver`$VSERVER $vserver exec which $packagemgr`" ]; then
                              warning "can't find $packagemgr in vserver $vserver, skipping installed packages report."
                              nodpkg="$nodpkg|$vserver"
                           fi
			else
                           warning "vserver $vserver is not running, skipping installed packages report."
                           nodpkg="$nodpkg|$vserver"
			fi

		done
	else
		if [ -z "$packagemgr" -o ! -x "$packagemgr" ]; then 
			warning "can't find ${packagemgr}, skipping installed packages report."
			packages="no"
		fi
	fi
fi

if [ "$packages" == "yes" ]; then
   if [ $usevserver = yes ]
   then
      for vserver in `ls $VROOTDIR | grep -E -v $nodpkg`
      do
	 debug "$VSERVER $vserver exec $packagemgr $packagemgroptions > $VROOTDIR/$vserver$packagesfile"
	 $VSERVER $vserver exec $packagemgr $packagemgroptions > $VROOTDIR/$vserver$packagesfile || fatal "can not save $packagemgr info to $packagesfile"
      done
   fi
   
# We want to perform this on the host as well
   if [ "$packages" == "yes" ]; then
      debug "$packagemgr $packagemgroptions > $packagesfile"
      $packagemgr $packagemgroptions > $packagesfile || fatal "can not save $packagemgr info to $packagesfile"
   fi
fi

## System report ##############################

#
# here we grab a bunch of system stuff for a report
#

export STATUS

HASHES="#################################################################"
DASHES="-----------------------------------------------------------------"

cat /dev/null > $sysreportfile || fatal "can not write to $sysreportfile"


catiffile () {
   echo $HASHES >> $sysreportfile
   echo "# $STATUS" >> $sysreportfile
   echo $HASHES >> $sysreportfile
   if [ -f $1 ]; then
      echo "file: $1" >> $sysreportfile
      echo $DASHES >> $sysreportfile
      cat $1 >> $sysreportfile 2>&1 || info "reading of $1 failed"
   fi
   if [ -d $1 ]; then
      echo "directory: $1" >> $sysreportfile
      echo $DASHES >> $sysreportfile
      for file in `find $1 -maxdepth 3 -noleaf -type f`
      do
       catiffile $file
      done
   fi
   echo $DASHES >> $sysreportfile
} 

catifexec () {
   echo $HASHES >> $sysreportfile
   echo "# $STATUS" >> $sysreportfile
   echo $HASHES >> $sysreportfile
   $1  >> $sysreportfile 2>&1 || info "executing of $1 failed"
}
   

STATUS="Determining $os version:"
catiffile $osversion

STATUS="Determinding your current hostname: " 
catifexec "/bin/hostname"

STATUS="Getting the date:"
catifexec "/bin/date"

STATUS="Checking your systems current uptime and load average:"
catifexec "/usr/bin/uptime"

STATUS="Checking available memory:"
catifexec "/usr/bin/free"

STATUS="Checking free disk space:"
catifexec "/bin/df" "-al"

STATUS="Collecting what services run at what run level:"
if [ $os = "redhat" ]; then
   catifexec "/sbin/chkconfig --list"
   STATUS="Collecting information about /etc/rc.d:"
   catiffile "/bin/ls /etc/rc.d/rc*.d/"

elif [ $os = "debian" ]; then
    for level in 0 1 2 3 4 5 6 S; do
       echo "Level: $level" >> $sysreportfile
       for f in /etc/rc${level}.d/*; do
	# Remove /etc/Knn or Snn from beginning
          ff=$(echo $f | sed 's_/etc/rc..d/[KS][0-9][0-9]__')
          if [ $f != $ff ]; then
             echo $ff >> $sysreportfile
          fi
       done
       echo "" >> $sysreportfile
    done
fi

STATUS="Getting bootloader information:"
catifexec "/bin/ls -alR /boot"

# This covers sparc, alpha, and intel (respectively)
# updated for grub -mpg
if [ -f /etc/silo.conf ]; then
  STATUS="Collecting information about the boot process (silo):"
  catiffile "/etc/silo.conf"
fi
if [ -f /etc/milo.conf ]; then
  STATUS="Collecting information about the boot process (milo):"
  catiffile "/etc/milo.conf"
fi
if [ -f /etc/lilo.conf ]; then
  STATUS="Collecting information about the boot process (lilo):"
  catiffile "/etc/lilo.conf"
  catifexec "/sbin/lilo -q"
fi
if [ -d /boot/grub -a -f /boot/grub/grub.conf -a -f /boot/grub/device.map ]; then
  STATUS="Collecting information about the boot process (grub.conf):"
  catiffile "/boot/grub/grub.conf"
  STATUS="Collecting information about the boot process (grub.map):"
  catiffile "/boot/grub/device.map"
fi
if [ -f /etc/cluster.conf -o -f /etc/cluster.xml ] ; then
  STATUS="Gathering information on cluster setup"
  # 2.1 AS
  if [ -f /etc/cluster.conf ] ; then
    catiffile "/etc/cluster.conf"
  fi
  # Taroon
  if [ -f /etc/cluster.xml ] ; then
    catiffile "/etc/cluster.xml"
  fi
fi

STATUS="Gathering sysctl information (sysctl -a):"
catiffile "sysctl -a 2>/dev/null"
STATUS="Gathering sysctl information (/etc/sysctl.conf):"
catiffile "/etc/sysctl.conf"

STATUS="Gathering IP information (/sbin/ifconfig):"
catifexec "/sbin/ifconfig -a"

STATUS="Gathering additional IP information (/bin/ip addr list):"
catifexec "/bin/ip addr list"

STATUS="Checking network routes:"
catifexec "/sbin/route -n"

STATUS="Collecting Name Service Switch config information:"
catiffile "/etc/nsswitch.conf"

STATUS="Collecting information about system authentication (pam):"
catiffile "/etc/pam.conf"
catiffile "/etc/pam.d"

echo
echo "Getting information about the kernel."
echo
STATUS="Getting kernel version:"
catifexec "/bin/uname" "-a"
STATUS="Checking module information:"
catifexec "/sbin/lsmod"
for x  in $(/sbin/lsmod | /bin/cut -f1 -d" " 2>/dev/null | /bin/grep -v Module 2>/dev/null 
) ; do
  STATUS="Checking module information $x:"
  catifexec "/sbin/modinfo  $x"
done

STATUS="Currently getting ksysms information:"
catifexec "/sbin/ksyms"

STATUS="Gathering information about your filesystems:"
catiffile "/proc/filesystems"

STATUS="Gathering information about your system stat:"
catiffile "/proc/stat"

STATUS="Gathering information about your partitions:"
catiffile "/proc/partitions"

STATUS="Gathering information about your ksysms:"
catiffile "/proc/ksyms"

STATUS="Gathering information about slabinfo:"
catiffile "/proc/slabinfo"

# Added support to cover for the new modules.conf layout in Red Hat 7
STATUS="Collecting information regarding kernel modules"
VER=`uname -r`
catiffile "/lib/modules/$VER/modules.dep"
if [ -f /etc/conf.modules ]; then
  STATUS="Collecting information regarding kernel modules (conf.modules)"
  catiffile "/etc/conf.modules"
fi
if [ -f /etc/modules.conf ]; then
  STATUS="Collecting information regarding kernel modules (modules.conf)"
  catiffile "/etc/modules.conf"
fi
if [ -f /etc/modprobe.conf ]; then
  STATUS="Collecting information regarding kernel modules (modeprobe.conf)"
  catiffile "/etc/modprobe.conf"
fi

# dkms status
if [ -x /usr/sbin/dkms ] ; then
   STATUS="Gathering current status of modules, versions and kernels (dkms):"
  catifexec "/usr/sbin/dkms" "status"
fi

if [ -f /etc/sysconfig/isdncard ] ; then
  STATUS="Gathering information about ISDN:"
  catiffile "/etc/sysconfig/isdncard"
fi

STATUS="Collecting information from the proc directory:"
catiffile "/proc/pci"

STATUS="Getting kernel command line"
catiffile "/proc/cmdline"

STATUS="Gathering information about your CPU:"
catiffile "/proc/cpuinfo"

STATUS="Gathering information about your Ram:"
catiffile "/proc/meminfo"

STATUS="Gathering information about your ioports:"
catiffile "/proc/ioports"

STATUS="Gathering information about your interrupts:"
catiffile "/proc/interrupts"

STATUS="Gathering information about your scsi devices:"
catiffile "/proc/scsi"

STATUS="Gathering information about your dma:"
catiffile "/proc/dma"

STATUS="Gathering information about your devices (/proc/devices):"
catiffile "/proc/devices"

STATUS="Gathering information about your rtc:"
catiffile "/proc/rtc"

STATUS="Gathering information about your ide drivers:"
catiffile "/proc/ide"

STATUS="Gathering information about your bus:"
catifexec lspci
catiffile "/proc/bus"

echo
echo "Getting disk and filesystem information."
echo

STATUS="Collecting information from /etc/fstab:"
catiffile "/etc/fstab"

STATUS="Collecting disk partition information:"
catifexec "fdisk -l"

STATUS="Checking mounted file systems (mount) "
catifexec "/bin/mount"

STATUS="Checking mounted file systems (/proc/mounts)"
catiffile "/proc/mounts"

STATUS="Collecting Software RAID information (/proc/mdstat)"
catiffile "/proc/mdstat"

STATUS="Collecting Software RAID information (/etc/raidtab)"
catiffile "/etc/raidtab"

STATUS="Collecting Software RAID information (/etc/mdadm.conf)"
catiffile "/etc/mdadm.conf"

STATUS="Collecting Automount information (auto.master)"
catiffile "/etc/auto.master"

STATUS="Collecting Automount information (auto.misc)"
catiffile "/etc/auto.misc"

STATUS="Collecting Automount information (auto.net)"
catiffile "/etc/auto.net"

STATUS="Collecting LVM information:"
if [ $os = "redhat" ]; then
   catifexec "/usr/sbin/vgdisplay" "-vv"
elif [ $os = "debian" ]; then
   catifexec "/sbin/vgdisplay" "-vv"
fi
   
STATUS="Collecting SCSI Tape information (/etc/stinit.def)"
catiffile "/etc/stinit.def"

if [ -x /sbin/lsusb ] ; then
  STATUS="Collecting USB devices list (lsusb):"
  catifexec "/sbin/lsusb"
fi

if [ -x /usr/bin/lshal ] ; then
  STATUS="Collecting global devices list (lshal):"
  catifexec "/usr/bin/lshal"
fi


STATUS="Gathering information on SELinux setup"
catifexec "/usr/bin/selinuxconfig"
catifexec "/usr/sbin/sestatus"
if [ $os = "redhat" ]; then
   catifexec "rpm" "-q -V selinux-policy-targeted"
   catifexec "rpm" "-q -V selinux-policy-strict"
fi

if [ $usevserver = yes ]; then
   STATUS="Gathering vserver information"
   catiffile "/proc/virtual"
fi

if [ "$partitions" == "yes" ]; then
	if [ ! -x "$SFDISK" ]; then
		warning "can't find sfdisk, skipping sfdisk report."
		partitions="no"
	fi
	if [ ! -x "$HWINFO" ]; then
		warning "can't find hwinfo, skipping partition report."
		partitions="no"
	fi
fi

if [ "$hardware" == "yes" ]; then
	if [ ! -x "$HWINFO" ]; then
		warning "can't find hwinfo, skipping hardware report."
		hardware="no"
	fi
fi


## PARTITIONS #############################

# here we use sfdisk to dump a listing of all the partitions. 
# these files can be used to directly partition a disk of the same size.

if [ "$partitions" == "yes" ]; then
	devices=`$HWINFO --disk | grep "Device File" | cut -d\  -f5`
	for dev in $devices; do
		[ -b $dev ] || continue
		label=${dev#/dev/}
		label=${label//\//-}
		outputfile=${partitionsfile//__star__/$label}
		debug "$SFDISK $sfdisk_options -d $dev > $outputfile"
		$SFDISK $sfdisk_options -d $dev > $outputfile
	done
fi

## HARDWARE #############################

#
# here we use hwinfo to dump a table listing all the
# information we can find on the hardware of this machine
# 

if [ "$hardware" == "yes" ]; then
	if [ -f $hardwarefile ]; then
		rm $hardwarefile
	fi
	touch $hardwarefile
	echo -e "\n\n====================== summary ======================\n" >>  $hardwarefile
	debug "$HWINFO --short --cpu --network --disk --pci  >> $hardwarefile"
	$HWINFO --short --cpu --network --disk --pci  >> $hardwarefile
	for flag in cpu network disk bios pci; do
		echo -e "\n\n====================== $flag ======================\n" >>  $hardwarefile
		$HWINFO --$flag >> $hardwarefile
	done
fi