Initial files

This commit is contained in:
bhaiest 2022-04-21 15:47:47 +00:00
commit b04bccfb78
69 changed files with 1296 additions and 0 deletions

1
airootfs/etc/hostname Normal file
View File

@ -0,0 +1 @@
steamos

1
airootfs/etc/locale.conf Normal file
View File

@ -0,0 +1 @@
LANG=en_US.UTF-8

1
airootfs/etc/localtime Symbolic link
View File

@ -0,0 +1 @@
/usr/share/zoneinfo/UTC

View File

@ -0,0 +1,67 @@
# vim:set ft=sh
# MODULES
# The following modules are loaded before any boot hooks are
# run. Advanced users may wish to specify all system modules
# in this array. For instance:
# MODULES=(piix ide_disk reiserfs)
MODULES=()
# BINARIES
# This setting includes any additional binaries a given user may
# wish into the CPIO image. This is run last, so it may be used to
# override the actual binaries included by a given hook
# BINARIES are dependency parsed, so you may safely ignore libraries
BINARIES=()
# FILES
# This setting is similar to BINARIES above, however, files are added
# as-is and are not parsed in any way. This is useful for config files.
FILES=()
# HOOKS
# This is the most important setting in this file. The HOOKS control the
# modules and scripts added to the image, and what happens at boot time.
# Order is important, and it is recommended that you do not change the
# order in which HOOKS are added. Run 'mkinitcpio -H <hook name>' for
# help on a given hook.
# 'base' is _required_ unless you know precisely what you are doing.
# 'udev' is _required_ in order to automatically load modules
# 'filesystems' is _required_ unless you specify your fs modules in MODULES
# Examples:
## This setup specifies all modules in the MODULES setting above.
## No raid, lvm2, or encrypted root is needed.
# HOOKS=(base)
#
## This setup will autodetect all modules for your system and should
## work as a sane default
# HOOKS=(base udev autodetect block filesystems)
#
## This setup will generate a 'full' image which supports most systems.
## No autodetection is done.
# HOOKS=(base udev block filesystems)
#
## This setup assembles a pata mdadm array with an encrypted root FS.
## Note: See 'mkinitcpio -H mdadm' for more information on raid devices.
# HOOKS=(base udev block mdadm encrypt filesystems)
#
## This setup loads an lvm2 volume group on a usb device.
# HOOKS=(base udev block lvm2 filesystems)
#
## NOTE: If you have /usr on a separate partition, you MUST include the
# usr, fsck and shutdown hooks.
HOOKS=(base udev modconf memdisk archiso archiso_loop_mnt archiso_pxe_common archiso_pxe_nbd archiso_pxe_http archiso_pxe_nfs archiso_kms block filesystems keyboard)
# COMPRESSION
# Use this to compress the initramfs image. By default, gzip compression
# is used. Use 'cat' to create an uncompressed image.
#COMPRESSION="gzip"
#COMPRESSION="bzip2"
#COMPRESSION="lzma"
COMPRESSION="xz"
#COMPRESSION="lzop"
#COMPRESSION="lz4"
#COMPRESSION="zstd"
# COMPRESSION_OPTIONS
# Additional options for the compressor
#COMPRESSION_OPTIONS=()

View File

@ -0,0 +1,8 @@
# mkinitcpio preset file for the 'linux' package on archiso
PRESETS=('archiso')
ALL_kver='/boot/vmlinuz-linux'
ALL_config='/etc/mkinitcpio.conf'
archiso_image="/boot/initramfs-linux.img"

View File

@ -0,0 +1,7 @@
# The broadcom-wl package requires some modules to be disabled in order to use
# wl. Since the ISO image needs to cover many hardware cases, this file
# overrides the default blacklist in /usr/lib/modprobe.d/
#
# If you need to use wl, you may need to delete this file, then `rmmod` any
# already-loaded modules that are now blacklisted before proceeding to modprobe
# wl itself.

8
airootfs/etc/motd Normal file
View File

@ -0,0 +1,8 @@
Welcome to SteamOS 3!
To install SteamOS 3 on your device, connect to network using RNDIS/Ethernet
or connect to wifi using iwctl
then type holoinstall in!
Alternatively, you can repair your current ArchLinux/SteamOS installation
by chrooting into it using arch-chroot

103
airootfs/etc/pacman.conf Normal file
View File

@ -0,0 +1,103 @@
#
# /etc/pacman.conf
#
# See the pacman.conf(5) manpage for option and repository directives
#
# GENERAL OPTIONS
#
[options]
# The following paths are commented out with their default values listed.
# If you wish to use different paths, uncomment and update the paths.
#RootDir = /
#DBPath = /var/lib/pacman/
#CacheDir = /var/cache/pacman/pkg/
#LogFile = /var/log/pacman.log
#GPGDir = /etc/pacman.d/gnupg/
#HookDir = /etc/pacman.d/hooks/
HoldPkg = pacman glibc
#XferCommand = /usr/bin/curl -L -C - -f -o %o %u
#XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u
#CleanMethod = KeepInstalled
Architecture = auto
# Pacman won't upgrade packages listed in IgnorePkg and members of IgnoreGroup
#IgnorePkg =
#IgnoreGroup =
#NoUpgrade =
#NoExtract =
# Misc options
#UseSyslog
#Color
#TotalDownload
# We cannot check disk space from within a chroot environment
CheckSpace
#VerbosePkgLists
ParallelDownloads = 5
# By default, pacman accepts packages signed by keys that its local keyring
# trusts (see pacman-key and its man page), as well as unsigned packages.
SigLevel = Required DatabaseOptional
LocalFileSigLevel = Optional
#RemoteFileSigLevel = Required
# NOTE: You must run `pacman-key --init` before first using pacman; the local
# keyring can then be populated with the keys of all official Arch Linux
# packagers with `pacman-key --populate archlinux`.
#
# REPOSITORIES
# - can be defined here or included from another file
# - pacman will search repositories in the order defined here
# - local/custom mirrors can be added here or in separate files
# - repositories listed first will take precedence when packages
# have identical names, regardless of version number
# - URLs will have $repo replaced by the name of the current repo
# - URLs will have $arch replaced by the name of the architecture
#
# Repository entries are of the format:
# [repo-name]
# Server = ServerName
# Include = IncludePath
#
# The header [repo-name] is crucial - it must be present and
# uncommented to enable the repo.
#
# The testing repositories are disabled by default. To enable, uncomment the
# repo name header and Include lines. You can add preferred servers immediately
# after the header, and they will be used before the default mirrors.
#[testing]
#Include = /etc/pacman.d/mirrorlist
[jupiter]
Include = /etc/pacman.d/mirrorlist
SigLevel = Never
[holo]
Include = /etc/pacman.d/mirrorlist
SigLevel = Never
[core]
Include = /etc/pacman.d/mirrorlist
[extra]
Include = /etc/pacman.d/mirrorlist
#[community-testing]
#Include = /etc/pacman.d/mirrorlist
[community]
Include = /etc/pacman.d/mirrorlist
[multilib]
Include = /etc/pacman.d/mirrorlist
# An example of a custom package repository. See the pacman manpage for
# tips on creating your own repositories.
#[custom]
#SigLevel = Optional TrustAll
#Server = file:///home/custompkgs

View File

@ -0,0 +1,13 @@
# remove from airootfs!
[Trigger]
Operation = Install
Type = Package
Target = glibc
[Action]
Description = Uncommenting en_US.UTF-8 locale and running locale-gen...
When = PostTransaction
Depends = glibc
Depends = sed
Depends = sh
Exec = /bin/sh -c "sed -i 's/#\(en_US\.UTF-8\)/\1/' /etc/locale.gen && locale-gen"

View File

@ -0,0 +1,18 @@
# remove from airootfs!
# As a workaround for https://bugs.archlinux.org/task/49347 , remove pacman hooks specific to the ISO build process.
# If not, they would be used when pacstrap is run in the live environment.
[Trigger]
Operation = Install
Operation = Upgrade
Operation = Remove
Type = Package
Target = *
[Action]
Description = Work around FS#49347 by removing custom pacman hooks that are only required during ISO build...
When = PostTransaction
Depends = sh
Depends = coreutils
Depends = grep
Exec = /bin/sh -c "rm -- $(grep -Frl 'remove from airootfs' /etc/pacman.d/hooks/)"

View File

@ -0,0 +1 @@
Server = https://steamdeck-packages.steamos.cloud/archlinux-mirror/$repo/os/$arch

1
airootfs/etc/passwd Normal file
View File

@ -0,0 +1 @@
root:x:0:0:root:/root:/usr/bin/zsh

1
airootfs/etc/resolv.conf Symbolic link
View File

@ -0,0 +1 @@
/run/systemd/resolve/stub-resolv.conf

1
airootfs/etc/shadow Normal file
View File

@ -0,0 +1 @@
root::14871::::::

View File

@ -0,0 +1,116 @@
# $OpenBSD: sshd_config,v 1.104 2021/07/02 05:11:21 dtucker Exp $
# This is the sshd server system-wide configuration file. See
# sshd_config(5) for more information.
# This sshd was compiled with PATH=/usr/local/sbin:/usr/local/bin:/usr/bin
# The strategy used for options in the default sshd_config shipped with
# OpenSSH is to specify options with their default value where
# possible, but leave them commented. Uncommented options override the
# default value.
#Port 22
#AddressFamily any
#ListenAddress 0.0.0.0
#ListenAddress ::
#HostKey /etc/ssh/ssh_host_rsa_key
#HostKey /etc/ssh/ssh_host_ecdsa_key
#HostKey /etc/ssh/ssh_host_ed25519_key
# Ciphers and keying
#RekeyLimit default none
# Logging
#SyslogFacility AUTH
#LogLevel INFO
# Authentication:
#LoginGraceTime 2m
PermitRootLogin yes
#StrictModes yes
#MaxAuthTries 6
#MaxSessions 10
#PubkeyAuthentication yes
# The default is to check both .ssh/authorized_keys and .ssh/authorized_keys2
# but this is overridden so installations will only check .ssh/authorized_keys
AuthorizedKeysFile .ssh/authorized_keys
#AuthorizedPrincipalsFile none
#AuthorizedKeysCommand none
#AuthorizedKeysCommandUser nobody
# For this to work you will also need host keys in /etc/ssh/ssh_known_hosts
#HostbasedAuthentication no
# Change to yes if you don't trust ~/.ssh/known_hosts for
# HostbasedAuthentication
#IgnoreUserKnownHosts no
# Don't read the user's ~/.rhosts and ~/.shosts files
#IgnoreRhosts yes
# To disable tunneled clear text passwords, change to no here!
#PasswordAuthentication yes
#PermitEmptyPasswords no
# Change to no to disable s/key passwords
#KbdInteractiveAuthentication yes
# Kerberos options
#KerberosAuthentication no
#KerberosOrLocalPasswd yes
#KerberosTicketCleanup yes
#KerberosGetAFSToken no
# GSSAPI options
#GSSAPIAuthentication no
#GSSAPICleanupCredentials yes
# Set this to 'yes' to enable PAM authentication, account processing,
# and session processing. If this is enabled, PAM authentication will
# be allowed through the KbdInteractiveAuthentication and
# PasswordAuthentication. Depending on your PAM configuration,
# PAM authentication via KbdInteractiveAuthentication may bypass
# the setting of "PermitRootLogin without-password".
# If you just want the PAM account and session checks to run without
# PAM authentication, then enable this but set PasswordAuthentication
# and KbdInteractiveAuthentication to 'no'.
UsePAM yes
#AllowAgentForwarding yes
#AllowTcpForwarding yes
#GatewayPorts no
#X11Forwarding no
#X11DisplayOffset 10
#X11UseLocalhost yes
#PermitTTY yes
PrintMotd no # pam does that
#PrintLastLog yes
#TCPKeepAlive yes
#PermitUserEnvironment no
#Compression delayed
#ClientAliveInterval 0
#ClientAliveCountMax 3
#UseDNS no
#PidFile /run/sshd.pid
#MaxStartups 10:30:100
#PermitTunnel no
#ChrootDirectory none
#VersionAddendum none
# no default banner path
#Banner none
# override default of no subsystems
Subsystem sftp /usr/lib/ssh/sftp-server
# Example of overriding settings on a per-user basis
#Match User anoncvs
# X11Forwarding no
# AllowTcpForwarding no
# PermitTTY no
# ForceCommand cvs server

View File

@ -0,0 +1,2 @@
[Journal]
Storage=volatile

View File

@ -0,0 +1,4 @@
[Login]
HandleSuspendKey=ignore
HandleHibernateKey=ignore
HandleLidSwitch=ignore

View File

@ -0,0 +1,18 @@
[Match]
Name=en*
Name=eth*
[Network]
DHCP=yes
IPv6PrivacyExtensions=yes
# systemd-networkd does not set per-interface-type default route metrics
# https://github.com/systemd/systemd/issues/17698
# Explicitly set route metric, so that Ethernet is preferred over Wi-Fi and Wi-Fi is preferred over mobile broadband.
# Use values from NetworkManager. From nm_device_get_route_metric_default in
# https://gitlab.freedesktop.org/NetworkManager/NetworkManager/-/blob/main/src/core/devices/nm-device.c
[DHCPv4]
RouteMetric=100
[IPv6AcceptRA]
RouteMetric=100

View File

@ -0,0 +1,17 @@
[Match]
Name=wl*
[Network]
DHCP=yes
IPv6PrivacyExtensions=yes
# systemd-networkd does not set per-interface-type default route metrics
# https://github.com/systemd/systemd/issues/17698
# Explicitly set route metric, so that Ethernet is preferred over Wi-Fi and Wi-Fi is preferred over mobile broadband.
# Use values from NetworkManager. From nm_device_get_route_metric_default in
# https://gitlab.freedesktop.org/NetworkManager/NetworkManager/-/blob/main/src/core/devices/nm-device.c
[DHCPv4]
RouteMetric=600
[IPv6AcceptRA]
RouteMetric=600

View File

@ -0,0 +1,17 @@
[Match]
Name=ww*
[Network]
DHCP=yes
IPv6PrivacyExtensions=yes
# systemd-networkd does not set per-interface-type default route metrics
# https://github.com/systemd/systemd/issues/17698
# Explicitly set route metric, so that Ethernet is preferred over Wi-Fi and Wi-Fi is preferred over mobile broadband.
# Use values from NetworkManager. From nm_device_get_route_metric_default in
# https://gitlab.freedesktop.org/NetworkManager/NetworkManager/-/blob/main/src/core/devices/nm-device.c
[DHCPv4]
RouteMetric=700
[IPv6AcceptRA]
RouteMetric=700

View File

@ -0,0 +1 @@
/usr/lib/systemd/system/cloud-config.service

View File

@ -0,0 +1 @@
/usr/lib/systemd/system/cloud-final.service

View File

@ -0,0 +1 @@
/usr/lib/systemd/system/cloud-init-local.service

View File

@ -0,0 +1 @@
/usr/lib/systemd/system/cloud-init.service

View File

@ -0,0 +1 @@
/usr/lib/systemd/system/ModemManager.service

View File

@ -0,0 +1 @@
/usr/lib/systemd/system/systemd-networkd.service

View File

@ -0,0 +1 @@
/usr/lib/systemd/system/systemd-resolved.service

View File

@ -0,0 +1,8 @@
[Unit]
Description=Temporary /etc/pacman.d/gnupg directory
[Mount]
What=tmpfs
Where=/etc/pacman.d/gnupg
Type=tmpfs
Options=mode=0755

View File

@ -0,0 +1,3 @@
[Service]
ExecStart=
ExecStart=-/sbin/agetty --autologin root --noclear %I 38400 linux

View File

@ -0,0 +1,13 @@
[Unit]
Description=Unmute All Sound Card Controls For Use With The Live Arch Environment
# This needs to run after the audio device becomes available.
Wants=systemd-udev-settle.service
After=systemd-udev-settle.service sound.target
ConditionKernelCommandLine=accessibility=on
[Service]
Type=oneshot
ExecStart=/usr/local/bin/livecd-sound -u
[Install]
WantedBy=sound.target

View File

@ -0,0 +1,20 @@
[Unit]
Description=Screen reader service
After=livecd-alsa-unmuter.service
Before=getty@tty1.service
ConditionKernelCommandLine=accessibility=on
[Service]
Type=oneshot
TTYPath=/dev/tty13
ExecStartPre=/usr/bin/chvt 13
ExecStart=/usr/local/bin/livecd-sound -p
ExecStartPost=/usr/bin/chvt 1
ExecStartPost=systemctl start espeakup.service
StandardInput=tty
TTYVHangup=yes
TTYVTDisallocate=yes
RemainAfterExit=true
[Install]
WantedBy=multi-user.target

View File

@ -0,0 +1 @@
/usr/lib/systemd/system/ModemManager.service

View File

@ -0,0 +1 @@
../choose-mirror.service

View File

@ -0,0 +1 @@
/usr/lib/systemd/system/iwd.service

View File

@ -0,0 +1 @@
/etc/systemd/system/livecd-talk.service

View File

@ -0,0 +1 @@
../pacman-init.service

View File

@ -0,0 +1 @@
/usr/lib/systemd/system/qemu-guest-agent.service

View File

@ -0,0 +1 @@
/usr/lib/systemd/system/reflector.service

View File

@ -0,0 +1 @@
/usr/lib/systemd/system/sshd.service

View File

@ -0,0 +1 @@
/usr/lib/systemd/system/systemd-networkd.service

View File

@ -0,0 +1 @@
/usr/lib/systemd/system/systemd-resolved.service

View File

@ -0,0 +1 @@
/usr/lib/systemd/system/vboxservice.service

View File

@ -0,0 +1 @@
/usr/lib/systemd/system/systemd-networkd-wait-online.service

View File

@ -0,0 +1,13 @@
[Unit]
Description=Initializes Pacman keyring
Requires=etc-pacman.d-gnupg.mount
After=etc-pacman.d-gnupg.mount
[Service]
Type=oneshot
RemainAfterExit=yes
ExecStart=/usr/bin/pacman-key --init
ExecStart=/usr/bin/pacman-key --populate
[Install]
WantedBy=multi-user.target

View File

@ -0,0 +1 @@
/usr/lib/systemd/system/systemd-networkd.socket

View File

@ -0,0 +1 @@
../livecd-alsa-unmuter.service

View File

@ -0,0 +1,6 @@
# Allow systemd-networkd-wait-online to succeed with one interface, otherwise, if multiple network interfaces exist,
# network-online.target gets needlessly delayed.
# See https://wiki.archlinux.org/title/systemd-networkd#systemd-networkd-wait-online
[Service]
ExecStart=
ExecStart=/usr/lib/systemd/systemd-networkd-wait-online --any

View File

@ -0,0 +1,6 @@
# Reflector configuration file for the systemd service.
--save /etc/pacman.d/mirrorlist
--protocol https
--latest 20
--sort rate

View File

@ -0,0 +1,34 @@
#!/usr/bin/env bash
script_cmdline ()
{
local param
for param in $(< /proc/cmdline); do
case "${param}" in
script=*) echo "${param#*=}" ; return 0 ;;
esac
done
}
automated_script ()
{
local script rt
script="$(script_cmdline)"
if [[ -n "${script}" && ! -x /tmp/startup_script ]]; then
if [[ "${script}" =~ ^((http|https|ftp)://) ]]; then
curl "${script}" --location --retry-connrefused --retry 10 -s -o /tmp/startup_script >/dev/null
rt=$?
else
cp "${script}" /tmp/startup_script
rt=$?
fi
if [[ ${rt} -eq 0 ]]; then
chmod +x /tmp/startup_script
/tmp/startup_script
fi
fi
}
if [[ $(tty) == "/dev/tty1" ]]; then
automated_script
fi

6
airootfs/root/.zlogin Normal file
View File

@ -0,0 +1,6 @@
# fix for screen readers
if grep -Fq 'accessibility=' /proc/cmdline &> /dev/null; then
setopt SINGLE_LINE_ZLE
fi
~/.automated_script.sh

73
airootfs/usr/bin/holoinstall Executable file
View File

@ -0,0 +1,73 @@
#!/bin/zsh
echo "SteamOS 3 Installer (x86_64)"
echo "Start time: $(date)"
CMD_PACMAN_INSTALL=(/usr/bin/pacman --noconfirm -S --needed)
CMD_PACMAN_UPDATE=(/usr/bin/pacman -Sy)
SYSTEM_LOCALE="${SYSTEM_LOCALE:-en_US.UTF-8 UTF-8}"
HOLO_INSTALL_DIR="${HOLO_INSTALL_DIR:-/mnt}"
# Installation begins here
echo "Starting installation..."
${CMD_PACMAN_UPDATE}
echo "db update complete!"
lsblk
read "?Enter your desired drive node here: " DEVICE
read "?WARNING: This drive is going to be erased fully. Press enter to continue, or CTRL+Z to terminate"
INSTALLDEVICE="${DEVICE}"
echo ${DEVICE} | grep -q -P "^/dev/(nvme|loop)"
if [ $? -eq 0 ]; then
INSTALLDEVICE="${DEVICE}p"
fi
echo "Creating partitions..."
parted ${INSTALLDEVICE} mklabel gpt
parted ${INSTALLDEVICE} mkpart primary fat32 2M 256M
parted ${INSTALLDEVICE} set 1 boot on
parted ${INSTALLDEVICE} set 1 esp on
parted ${INSTALLDEVICE} mkpart primary btrfs 256M 100%
root_partition="${INSTALLDEVICE}2"
mkfs -t vfat ${INSTALLDEVICE}1
fatlabel ${INSTALLDEVICE}1 HOLOEFI
mkfs -t btrfs ${root_partition}
btrfs filesystem label ${root_partition} holo-root
echo "Partition creating complete, mounting and pacstrapping..."
mount -t btrfs -o subvol=/,compress-force=zstd:1,discard,noatime,nodiratime ${root_partition} ${HOLO_INSTALL_DIR}
pacstrap -i ${HOLO_INSTALL_DIR} base base-devel amd-ucode intel-ucode linux-neptune linux-firmware
echo "Base system installation done, generating fstab..."
genfstab -U -p /mnt >> /mnt/etc/fstab
cp /etc/pacman.conf /mnt/etc/pacman.conf
cp /etc/pacman.d/mirrorlist /mnt/etc/pacman.d/mirrorlist
read "?Enter your hostname for this installation: " HOLOHOSTNAME
echo ${HOLOHOSTNAME} > ${HOLO_INSTALL_DIR}/etc/hostname
read "?Enter your username for this installation: " HOLOUSER
read "?Enter your user password for this installation: " HOLOPASS
echo "Creating user ${HOLOUSER}..."
echo -e "root\nroot" | arch-chroot ${HOLO_INSTALL_DIR} passwd root
arch-chroot ${HOLO_INSTALL_DIR} useradd --create-home ${HOLOUSER}
echo -e "${HOLOPASS}\n${HOLOPASS}" | arch-chroot ${HOLO_INSTALL_DIR} passwd ${HOLOUSER}
echo "${HOLOUSER} ALL=(root) NOPASSWD:ALL" > ${HOLO_INSTALL_DIR}/etc/sudoers.d/${HOLOUSER}
chmod 0440 ${HOLO_INSTALL_DIR}/etc/sudoers.d/${HOLOUSER}
echo "127.0.1.1 ${HOLOHOSTNAME}" >> ${HOLO_INSTALL_DIR}/etc/hosts
echo "Installing bootloader..."
arch-chroot ${HOLO_INSTALL_DIR} ${CMD_PACMAN_UPDATE}
mkdir ${HOLO_INSTALL_DIR}/boot/efi
mount -t vfat ${INSTALLDEVICE}1 ${HOLO_INSTALL_DIR}/boot/efi
arch-chroot ${HOLO_INSTALL_DIR} ${CMD_PACMAN_INSTALL} efibootmgr neofetch core/grub mkinitcpio networkmanager inetutils
arch-chroot ${HOLO_INSTALL_DIR} systemctl enable NetworkManager systemd-timesyncd
arch-chroot ${HOLO_INSTALL_DIR} grub-install --target=x86_64-efi --efi-directory=/boot/efi --bootloader-id=holo --removable
arch-chroot ${HOLO_INSTALL_DIR} grub-mkconfig -o /boot/grub/grub.cfg
echo "Installing DE and dependencies..."
# Updates pacman db for chroot
arch-chroot ${HOLO_INSTALL_DIR} ${CMD_PACMAN_UPDATE}
# Installs Steam, KDE Plasma and stuff
arch-chroot ${HOLO_INSTALL_DIR} ${CMD_PACMAN_INSTALL} archlinux-keyring curl tar yay git go plasma lightdm lightdm-gtk-greeter dolphin chromium steam-jupiter-stable gamescope mangohud jupiter-hw-support pipewire-alsa pipewire-jack lib32-pipewire-jack pipewire-pulse pipewire-v4l2 lib32-pipewire-v4l2 pipewire lib32-pipewire pipewire-media-session
# Services
echo "${SYSTEM_LOCALE}" >> ${HOLO_INSTALL_DIR}/etc/locale.gen
arch-chroot ${HOLO_INSTALL_DIR} locale-gen
echo "LANG=$(echo ${SYSTEM_LOCALE} | cut -d' ' -f1)" > ${HOLO_INSTALL_DIR}/etc/locale.conf
arch-chroot ${HOLO_INSTALL_DIR} systemctl enable lightdm
echo "Installation complete! You may reboot now!"
echo "End time: $(date)"

View File

@ -0,0 +1,5 @@
#!/bin/sh
#
# SPDX-License-Identifier: GPL-3.0-or-later
exec lynx 'https://wiki.archlinux.org/title/Installation_guide'

View File

@ -0,0 +1,28 @@
#!/bin/bash
#
# SPDX-License-Identifier: GPL-3.0-or-later
get_cmdline() {
local param
for param in $(< /proc/cmdline); do
case "${param}" in
$1=*) echo "${param##*=}";
return 0
;;
esac
done
}
mirror=$(get_cmdline mirror)
[[ $mirror = auto ]] && mirror=$(get_cmdline archiso_http_srv)
[[ $mirror ]] || exit 0
mv /etc/pacman.d/mirrorlist /etc/pacman.d/mirrorlist.orig
cat >/etc/pacman.d/mirrorlist << EOF
#
# Arch Linux repository mirrorlist
# Generated by archiso
#
Server = ${mirror%%/}/\$repo/os/\$arch
EOF

View File

@ -0,0 +1,248 @@
#!/usr/bin/env bash
#
# SPDX-License-Identifier: GPL-3.0-or-later
usage() {
cat <<- _EOF_
live cd sound helper script.
Usage: livecdsound [OPTION]
OPTIONS
-u, --unmute unmute all sound cards
-p, --pick select a card for speetch output
-h, --help Show this usage message
_EOF_
}
bugout () {
printf "/usr/local/bin/livecdsound: programming error"
stat_fail
}
echo_card_indices()
{
if [ -f /proc/asound/cards ] ; then
sed -n -e's/^[[:space:]]*\([0-7]\)[[:space:]].*/\1/p' /proc/asound/cards
fi
}
# The following functions try to set many controls.
# No card has all the controls and so some of the attempts are bound to fail.
# Because of this, the functions can't return useful status values.
# $1 <card id>
# $2 <control>
# $3 <level>
unmute_and_set_level(){
{ [ "$3" ] &&[ "$2" ] && [ "$1" ] ; } || bugout
systemd-cat -t "livecdsound" printf "Setting: %s on card: %s to %s\n" "$2" "$1" "$3"
systemd-cat -t "livecdsound" amixer -c "$1" set "$2" "$3" unmute
return 0
}
# $1 <card id>
# $2 <control>
mute_and_zero_level()
{
{ [ "$1" ] && [ "$2" ] ; } || bugout
systemd-cat -t "livecdsound" printf "Muting control: %s on card: %s\n" "$2" "$1"
systemd-cat -t "livecdsound" amixer -c "$1" set "$2" "0%" mute
return 0
}
# $1 <card ID>
# $2 <control>
# $3 "on" | "off"
switch_control()
{
{ [ "$3" ] && [ "$1" ] ; } || bugout
systemd-cat -t "livecdsound" printf "Switching control: %s on card: %s to %s\n" "$2" "$1" "$3"
systemd-cat -t "livecdsound" amixer -c "$1" set "$2" "$3"
return 0
}
# $1 <card ID>
sanify_levels_on_card()
{
unmute_and_set_level "$1" "Front" "80%"
unmute_and_set_level "$1" "Master" "80%"
unmute_and_set_level "$1" "Master Mono" "80%"
unmute_and_set_level "$1" "Master Digital" "80%" # E.g., cs4237B
unmute_and_set_level "$1" "Playback" "80%"
unmute_and_set_level "$1" "Headphone" "100%"
unmute_and_set_level "$1" "PCM" "80%"
unmute_and_set_level "$1" "PCM,1" "80%" # E.g., ess1969
unmute_and_set_level "$1" "DAC" "80%" # E.g., envy24, cs46xx
unmute_and_set_level "$1" "DAC,0" "80%" # E.g., envy24
unmute_and_set_level "$1" "DAC,1" "80%" # E.g., envy24
unmute_and_set_level "$1" "Synth" "80%"
unmute_and_set_level "$1" "CD" "80%"
unmute_and_set_level "$1" "PC Speaker" "100%"
mute_and_zero_level "$1" "Mic"
mute_and_zero_level "$1" "IEC958" # Ubuntu #19648
# Intel P4P800-MX
switch_control "$1" "Master Playback Switch" on
switch_control "$1" "Master Surround" on
# Trident/YMFPCI/emu10k1:
unmute_and_set_level "$1" "Wave" "80%"
unmute_and_set_level "$1" "Music" "80%"
unmute_and_set_level "$1" "AC97" "80%"
# DRC:
unmute_and_set_level "$1" "Dynamic Range Compression" "80%"
# Required for HDA Intel (hda-intel):
unmute_and_set_level "$1" "Front" "80%"
# Required for SB Live 7.1/24-bit (ca0106):
unmute_and_set_level "$1" "Analog Front" "80%"
# Required at least for Via 823x hardware on DFI K8M800-MLVF Motherboard
switch_control "$1" "IEC958 Capture Monitor" off
# Required for hardware allowing toggles for AC97 through IEC958,
# valid values are 0, 1, 2, 3. Needs to be set to 0 for PCM1.
unmute_and_set_level "$1" "IEC958 Playback AC97-SPSA" "0"
# Required for newer Via hardware
unmute_and_set_level "$1" "VIA DXS,0" "80%"
unmute_and_set_level "$1" "VIA DXS,1" "80%"
unmute_and_set_level "$1" "VIA DXS,2" "80%"
unmute_and_set_level "$1" "VIA DXS,3" "80%"
# Required on some notebooks with ICH4:
switch_control "$1" "Headphone Jack Sense" off
switch_control "$1" "Line Jack Sense" off
# Some machines need one or more of these to be on;
# others need one or more of these to be off:
switch_control "$1" "Audigy Analog/Digital Output Jack" on
switch_control "$1" "SB Live Analog/Digital Output Jack" on
# D1984 -- Thinkpad T61/X61
switch_control "$1" "Speaker" on
switch_control "$1" "Headphone" on
# HDA-Intel w/ "Digital" capture mixer (See Ubuntu #193823)
unmute_and_set_level "$1" "Digital" "80%"
return 0
}
# $1 <card ID> | "all"
sanify_levels()
{
local ttsdml_returnstatus=0
local card
case "$1" in
all)
for card in $(echo_card_indices) ; do
sanify_levels_on_card "$card" || ttsdml_returnstatus=1
done
;;
*)
sanify_levels_on_card "$1" || ttsdml_returnstatus=1
;;
esac
return $ttsdml_returnstatus
}
# List all cards that *should* be usable for PCM audio. In my experience,
# the console speaker (handled by the pcsp driver) isn't a suitable playback
# device, so we'll exclude it.
list_non_pcsp_cards()
{
for card in $(echo_card_indices); do
local cardfile="/proc/asound/card${card}/id"
if [ -r "$cardfile" ] && [ -f "$cardfile" ] && \
[ "$(cat "$cardfile")" != pcsp ]; then
echo "$card"
fi
done
}
# Properly initialize the sound card so that we have audio at boot.
unmute_all_cards()
{
sanify_levels all
}
is_numeric() {
local str=$1
[[ "$str" =~ ^[0-9]+$ ]]
}
set_default_card() {
local card=$1
sed -e "s/%card%/$card/g" < /usr/local/share/livecd-sound/asound.conf.in \
> /etc/asound.conf
}
play_on_card() {
local card=$1 file=$2
aplay -q "-Dplughw:$card,0" "$file"
}
# If there are multiple usable sound cards, prompt the user to choose one,
# using auditory feedback.
pick_a_card()
{
set -f
usable_cards="$(list_non_pcsp_cards)"
num_usable_cards="$(wc -w <<< "$usable_cards")"
if [ "$num_usable_cards" -eq 1 ]; then
systemd-cat -t "livecdsound" printf "Only one sound card is detected\n"
exit 0
fi
systemd-cat -t "livecdsound" printf "multiple sound cards detected\n"
for card in $usable_cards; do
if ! is_numeric "$card"; then
continue
fi
play_on_card "$card" /usr/share/livecd-sounds/pick-a-card.wav&
done
wait
sleep 1
for card in $usable_cards; do
if ! is_numeric "$card"; then
continue
fi
play_on_card "$card" /usr/share/livecd-sounds/beep.wav
if read -r -t 10; then
systemd-cat -t "livecdsound" printf "Selecting %s sound card as default\n" "$card"
set_default_card "$card"
break
fi
done
}
if [[ $# -eq 0 ]]; then
echo "error: No argument passed."
exit 1
fi
while [[ "${1}" != "" ]]; do
case ${1} in
-h|--help)
usage
exit
;;
-u|--unmute)
systemd-cat -t "livecdsound" printf "Unmuting all cards"
unmute_all_cards
;;
-p|--pick)
pick_a_card
;;
*)
echo "error: Unsupported argument"
usage
exit 1
;;
esac
shift
done

View File

@ -0,0 +1,3 @@
Defaults node
defaults.ctl.card %card%;
defaults.pcm.card %card%;

View File

@ -0,0 +1,2 @@
arch-install-scripts
base

View File

@ -0,0 +1,6 @@
title SteamOS install medium (x86_64, UEFI)
linux /%INSTALL_DIR%/boot/x86_64/vmlinuz-linux-neptune
initrd /%INSTALL_DIR%/boot/intel-ucode.img
initrd /%INSTALL_DIR%/boot/amd-ucode.img
initrd /%INSTALL_DIR%/boot/x86_64/initramfs-linux-neptune.img
options archisobasedir=%INSTALL_DIR% archisolabel=%ARCHISO_LABEL%

View File

@ -0,0 +1,2 @@
timeout 15
default 01-archiso-x86_64-linux.conf

118
packages.x86_64 Normal file
View File

@ -0,0 +1,118 @@
alsa-utils
amd-ucode
arch-install-scripts
b43-fwcutter
base
bind-tools
brltty
broadcom-wl
btrfs-progs
clonezilla
cloud-init
crda
cryptsetup
darkhttpd
ddrescue
dhclient
dhcpcd
diffutils
dmraid
dnsmasq
dosfstools
e2fsprogs
edk2-shell
efibootmgr
espeakup
ethtool
exfatprogs
f2fs-tools
fatresize
fsarchiver
gnu-netcat
gpart
gpm
gptfdisk
grml-zsh-config
grub
hdparm
intel-ucode
ipw2100-fw
ipw2200-fw
irssi
iw
iwd
jfsutils
kitty-terminfo
less
lftp
libfido2
libusb-compat
linux-neptune
linux-atm
linux-firmware
livecd-sounds
lsscsi
lvm2
lynx
man-db
man-pages
mc
mdadm
memtest86+
mkinitcpio
mkinitcpio-archiso
mkinitcpio-nfs-utils
modemmanager
mtools
nano
nbd
ndisc6
nfs-utils
nilfs-utils
nmap
ntfs-3g
nvme-cli
openconnect
openssh
openvpn
partclone
parted
partimage
pcsclite
ppp
pptpclient
pv
qemu-guest-agent
refind
reiserfsprogs
rp-pppoe
rsync
rxvt-unicode-terminfo
screen
sdparm
sg3_utils
smartmontools
sof-firmware
squashfs-tools
sudo
syslinux
systemd-resolvconf
tcpdump
terminus-font
testdisk
tmux
tpm2-tss
udftools
usb_modeswitch
usbmuxd
usbutils
vim
virtualbox-guest-utils-nox
vpnc
wireless-regdb
wireless_tools
wpa_supplicant
wvdial
xfsprogs
xl2tpd
zsh

103
pacman.conf Normal file
View File

@ -0,0 +1,103 @@
#
# /etc/pacman.conf
#
# See the pacman.conf(5) manpage for option and repository directives
#
# GENERAL OPTIONS
#
[options]
# The following paths are commented out with their default values listed.
# If you wish to use different paths, uncomment and update the paths.
#RootDir = /
#DBPath = /var/lib/pacman/
#CacheDir = /var/cache/pacman/pkg/
#LogFile = /var/log/pacman.log
#GPGDir = /etc/pacman.d/gnupg/
#HookDir = /etc/pacman.d/hooks/
HoldPkg = pacman glibc
#XferCommand = /usr/bin/curl -L -C - -f -o %o %u
#XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u
#CleanMethod = KeepInstalled
Architecture = auto
# Pacman won't upgrade packages listed in IgnorePkg and members of IgnoreGroup
#IgnorePkg =
#IgnoreGroup =
#NoUpgrade =
#NoExtract =
# Misc options
#UseSyslog
#Color
#TotalDownload
# We cannot check disk space from within a chroot environment
CheckSpace
#VerbosePkgLists
ParallelDownloads = 5
# By default, pacman accepts packages signed by keys that its local keyring
# trusts (see pacman-key and its man page), as well as unsigned packages.
SigLevel = Required DatabaseOptional
LocalFileSigLevel = Optional
#RemoteFileSigLevel = Required
# NOTE: You must run `pacman-key --init` before first using pacman; the local
# keyring can then be populated with the keys of all official Arch Linux
# packagers with `pacman-key --populate archlinux`.
#
# REPOSITORIES
# - can be defined here or included from another file
# - pacman will search repositories in the order defined here
# - local/custom mirrors can be added here or in separate files
# - repositories listed first will take precedence when packages
# have identical names, regardless of version number
# - URLs will have $repo replaced by the name of the current repo
# - URLs will have $arch replaced by the name of the architecture
#
# Repository entries are of the format:
# [repo-name]
# Server = ServerName
# Include = IncludePath
#
# The header [repo-name] is crucial - it must be present and
# uncommented to enable the repo.
#
# The testing repositories are disabled by default. To enable, uncomment the
# repo name header and Include lines. You can add preferred servers immediately
# after the header, and they will be used before the default mirrors.
#[testing]
#Include = /etc/pacman.d/mirrorlist
[jupiter]
Include = /etc/pacman.d/mirrorlist
SigLevel = Never
[holo]
Include = /etc/pacman.d/mirrorlist
SigLevel = Never
[core]
Include = /etc/pacman.d/mirrorlist
[extra]
Include = /etc/pacman.d/mirrorlist
#[community-testing]
#Include = /etc/pacman.d/mirrorlist
[community]
Include = /etc/pacman.d/mirrorlist
[multilib]
Include = /etc/pacman.d/mirrorlist
# An example of a custom package repository. See the pacman manpage for
# tips on creating your own repositories.
#[custom]
#SigLevel = Optional TrustAll
#Server = file:///home/custompkgs

23
profiledef.sh Normal file
View File

@ -0,0 +1,23 @@
#!/usr/bin/env bash
# shellcheck disable=SC2034
iso_name="SteamOS_Holo"
iso_label="JUPITER_$(date +%Y%m)"
iso_publisher="theVakhovske <https://github.com/bhaiest>"
iso_application="SteamOS Live/Rescue CD"
iso_version="$(date +%Y.%m.%d)"
install_dir="arch"
buildmodes=('iso')
bootmodes=('uefi-x64.systemd-boot.esp' 'uefi-x64.systemd-boot.eltorito')
arch="x86_64"
pacman_conf="pacman.conf"
airootfs_image_type="squashfs"
airootfs_image_tool_options=('-comp' 'xz' '-Xbcj' 'x86' '-b' '1M' '-Xdict-size' '1M')
file_permissions=(
["/etc/shadow"]="0:0:400"
["/root"]="0:0:750"
["/root/.automated_script.sh"]="0:0:755"
["/usr/local/bin/choose-mirror"]="0:0:755"
["/usr/local/bin/Installation_guide"]="0:0:755"
["/usr/local/bin/livecd-sound"]="0:0:755"
)

28
syslinux/archiso_head.cfg Normal file
View File

@ -0,0 +1,28 @@
SERIAL 0 115200
UI vesamenu.c32
MENU TITLE Arch Linux
MENU BACKGROUND splash.png
MENU WIDTH 78
MENU MARGIN 4
MENU ROWS 7
MENU VSHIFT 10
MENU TABMSGROW 14
MENU CMDLINEROW 14
MENU HELPMSGROW 16
MENU HELPMSGENDROW 29
# Refer to http://syslinux.zytor.com/wiki/index.php/Doc/menu
MENU COLOR border 30;44 #40ffffff #a0000000 std
MENU COLOR title 1;36;44 #9033ccff #a0000000 std
MENU COLOR sel 7;37;40 #e0ffffff #20ffffff all
MENU COLOR unsel 37;44 #50ffffff #a0000000 std
MENU COLOR help 37;40 #c0ffffff #a0000000 std
MENU COLOR timeout_msg 37;40 #80ffffff #00000000 std
MENU COLOR timeout 1;37;40 #c0ffffff #00000000 std
MENU COLOR msg07 37;40 #90ffffff #a0000000 std
MENU COLOR tabmsg 31;40 #30ffffff #00000000 std
MENU CLEAR
MENU IMMEDIATE

View File

@ -0,0 +1,32 @@
LABEL arch64_nbd
TEXT HELP
Boot the Arch Linux install medium using NBD.
It allows you to install Arch Linux or perform system maintenance.
ENDTEXT
MENU LABEL Arch Linux install medium (x86_64, NBD)
LINUX /%INSTALL_DIR%/boot/x86_64/vmlinuz-linux
INITRD /%INSTALL_DIR%/boot/intel-ucode.img,/%INSTALL_DIR%/boot/amd-ucode.img,/%INSTALL_DIR%/boot/x86_64/initramfs-linux.img
APPEND archisobasedir=%INSTALL_DIR% archisolabel=%ARCHISO_LABEL% archiso_nbd_srv=${pxeserver} checksum verify
SYSAPPEND 3
LABEL arch64_nfs
TEXT HELP
Boot the Arch Linux live medium using NFS.
It allows you to install Arch Linux or perform system maintenance.
ENDTEXT
MENU LABEL Arch Linux install medium (x86_64, NFS)
LINUX /%INSTALL_DIR%/boot/x86_64/vmlinuz-linux
INITRD /%INSTALL_DIR%/boot/intel-ucode.img,/%INSTALL_DIR%/boot/amd-ucode.img,/%INSTALL_DIR%/boot/x86_64/initramfs-linux.img
APPEND archisobasedir=%INSTALL_DIR% archiso_nfs_srv=${pxeserver}:/run/archiso/bootmnt checksum verify
SYSAPPEND 3
LABEL arch64_http
TEXT HELP
Boot the Arch Linux live medium using HTTP.
It allows you to install Arch Linux or perform system maintenance.
ENDTEXT
MENU LABEL Arch Linux install medium (x86_64, HTTP)
LINUX /%INSTALL_DIR%/boot/x86_64/vmlinuz-linux
INITRD /%INSTALL_DIR%/boot/intel-ucode.img,/%INSTALL_DIR%/boot/amd-ucode.img,/%INSTALL_DIR%/boot/x86_64/initramfs-linux.img
APPEND archisobasedir=%INSTALL_DIR% archiso_http_srv=http://${pxeserver}/ checksum verify
SYSAPPEND 3

5
syslinux/archiso_pxe.cfg Normal file
View File

@ -0,0 +1,5 @@
INCLUDE archiso_head.cfg
INCLUDE archiso_pxe-linux.cfg
INCLUDE archiso_tail.cfg

View File

@ -0,0 +1,31 @@
LABEL arch64
TEXT HELP
Boot the Arch Linux install medium on BIOS.
It allows you to install Arch Linux or perform system maintenance.
ENDTEXT
MENU LABEL Arch Linux install medium (x86_64, BIOS)
LINUX /%INSTALL_DIR%/boot/x86_64/vmlinuz-linux
INITRD /%INSTALL_DIR%/boot/intel-ucode.img,/%INSTALL_DIR%/boot/amd-ucode.img,/%INSTALL_DIR%/boot/x86_64/initramfs-linux.img
APPEND archisobasedir=%INSTALL_DIR% archisolabel=%ARCHISO_LABEL%
# Accessibility boot option
LABEL arch64speech
TEXT HELP
Boot the Arch Linux install medium on BIOS with speakup screen reader.
It allows you to install Arch Linux or perform system maintenance with speech feedback.
ENDTEXT
MENU LABEL Arch Linux install medium (x86_64, BIOS) with ^speech
LINUX /%INSTALL_DIR%/boot/x86_64/vmlinuz-linux
INITRD /%INSTALL_DIR%/boot/intel-ucode.img,/%INSTALL_DIR%/boot/amd-ucode.img,/%INSTALL_DIR%/boot/x86_64/initramfs-linux.img
APPEND archisobasedir=%INSTALL_DIR% archisolabel=%ARCHISO_LABEL% accessibility=on
# Copy to RAM boot option
LABEL arch64ram
TEXT HELP
Boot the Arch Linux install medium on BIOS with Copy-to-RAM option
It allows you to install Arch Linux or perform system maintenance.
ENDTEXT
MENU LABEL Arch Linux install medium (x86_64, BIOS, Copy to RAM)
LINUX /%INSTALL_DIR%/boot/x86_64/vmlinuz-linux
INITRD /%INSTALL_DIR%/boot/intel-ucode.img,/%INSTALL_DIR%/boot/amd-ucode.img,/%INSTALL_DIR%/boot/x86_64/initramfs-linux.img
APPEND archisobasedir=%INSTALL_DIR% archisolabel=%ARCHISO_LABEL% copytoram

8
syslinux/archiso_sys.cfg Normal file
View File

@ -0,0 +1,8 @@
INCLUDE archiso_head.cfg
DEFAULT arch64
TIMEOUT 150
INCLUDE archiso_sys-linux.cfg
INCLUDE archiso_tail.cfg

35
syslinux/archiso_tail.cfg Normal file
View File

@ -0,0 +1,35 @@
LABEL existing
TEXT HELP
Boot an existing operating system.
Press TAB to edit the disk and partition number to boot.
ENDTEXT
MENU LABEL Boot existing OS
COM32 chain.c32
APPEND hd0 0
# http://www.memtest.org/
LABEL memtest
MENU LABEL Run Memtest86+ (RAM test)
LINUX /%INSTALL_DIR%/boot/memtest
# http://hdt-project.org/
LABEL hdt
MENU LABEL Hardware Information (HDT)
COM32 hdt.c32
APPEND modules_alias=hdt/modalias.gz pciids=hdt/pciids.gz
LABEL reboot
TEXT HELP
Reboot computer.
The computer's firmware must support APM.
ENDTEXT
MENU LABEL Reboot
COM32 reboot.c32
LABEL poweroff
TEXT HELP
Power off computer.
The computer's firmware must support APM.
ENDTEXT
MENU LABEL Power Off
COM32 poweroff.c32

BIN
syslinux/splash.png Normal file

Binary file not shown.

After

Width:  |  Height:  |  Size: 44 KiB

11
syslinux/syslinux.cfg Normal file
View File

@ -0,0 +1,11 @@
DEFAULT select
LABEL select
COM32 whichsys.c32
APPEND -pxe- pxe -sys- sys -iso- sys
LABEL pxe
CONFIG archiso_pxe.cfg
LABEL sys
CONFIG archiso_sys.cfg