holoiso/airootfs/usr/local/bin/holoinstall

#!/bin/zsh
# HoloISO Installer v2
# This defines all of the current variables.
CMD_PACMAN_INSTALL=(/usr/bin/pacman --noconfirm -S --needed --overwrite="*")
CMD_PACMAN_UPDATE=(/usr/bin/pacman -Sy)
CPU_VENDOR=$(cat /proc/cpuinfo | grep 'vendor' | uniq | cut -c 13-)
SYSTEM_LOCALE="${SYSTEM_LOCALE:-en_US.UTF-8 UTF-8}"
HOLO_INSTALL_DIR="${HOLO_INSTALL_DIR:-/mnt}"

# Internet connectivity check
wget -q --spider http://google.com
if [ $? -eq 0 ]; then
	echo "Internet check passed"
else
	echo -e "No Internet connection available, exiting\nUse wifi-menu util to connect WiFi"
	exit
fi

# Update system time
if [ $(timedatectl status | grep -c "NTP service: active") -ne 1 ]; then
	# If NTP is not active, enable it.
	timedatectl set-ntp true
	
	# Update the hardware clock.
	hwclock --systohc
fi


if [[ "${CPU_VENDOR}" == "AuthenticAMD" ]]; then
	UCODE_INSTALL_MSG="AMD CPU detected, installing AMD ucode..."
	UCODE_INSTALL="amd-ucode"
else
	UCODE_INSTALL_MSG="Intel CPU detected, installing Intel ucode..."
	UCODE_INSTALL="intel-ucode"
fi

base_os_install() {
	lsblk
	read "?Enter your desired drive node here (for example, sda or nvme0n1): " DRIVEDEVICE
	#read "?WARNING: This drive is going to be erased fully. Press enter to continue, or CTRL+Z to terminate"
	
	DEVICE="/dev/${DRIVEDEVICE}"
	
	INSTALLDEVICE="${DEVICE}"
	
	echo ${DEVICE} | grep -q -P "^/dev/(nvme|loop|mmcblk)"
	if [ $? -eq 0 ]; then
		INSTALLDEVICE="${DEVICE}p"
	fi
	
	if [ ! -b $DEVICE ]; then
		echo "$DEVICE not found! Installation Aborted!"
		exit 1
	fi
	
	echo "\n\nWARNING: The following drive is going to be erased fully. ALL DATA ON DRIVE $DEVICE WILL BE LOST!\n"
	lsblk $DEVICE
	echo -n "\nErase $DEVICE and begin installation(y/N): "
	read ANS
	
	if [[ ! ($ANS = 'y' || $ANS = 'Y') ]]; then
		echo "Installation Aborted!"
		exit 1
	fi
	
	echo "\nCreating partitions..."
	sfdisk --delete ${DEVICE}
	wipefs -a ${DEVICE}
	parted ${DEVICE} mklabel gpt
	parted ${DEVICE} mkpart primary fat32 2M 256M
	parted ${DEVICE} set 1 boot on
	parted ${DEVICE} set 1 esp on
	parted ${DEVICE} mkpart primary btrfs 256M 100%
	root_partition="${INSTALLDEVICE}2"
	mkfs -t vfat ${INSTALLDEVICE}1
	fatlabel ${INSTALLDEVICE}1 HOLOEFI
	mkfs -t btrfs -f ${root_partition}
	btrfs filesystem label ${root_partition} holo-root

	echo "\nPartitioning complete, mounting and pacstrapping..."
	echo "${UCODE_INSTALL_MSG}"
	mount -t btrfs -o subvol=/,compress-force=zstd:1,discard,noatime,nodiratime ${root_partition} ${HOLO_INSTALL_DIR}
	pacstrap -i ${HOLO_INSTALL_DIR} base base-devel ${UCODE_INSTALL} core/linux core/linux-headers linux-neptune-dri linux-neptune-dri-headers linux-firmware

	echo "\nBase system installation done, generating fstab..."
	genfstab -U -p /mnt >> /mnt/etc/fstab
	cp /etc/pacman.conf /mnt/etc/pacman.conf
	cp /etc/pacman.d/mirrorlist /mnt/etc/pacman.d/mirrorlist

	read "?Enter hostname for this installation: " HOLOHOSTNAME
	echo ${HOLOHOSTNAME} > ${HOLO_INSTALL_DIR}/etc/hostname
	# Setup password for root
	while true; do
		echo -n "Enter \"root\" password for this installation(will not echo): "
		read -s ROOTPASS
		echo
		echo -n "Enter \"root\" password for this installation(again): "
		read -s ROOTPASS_CONF
		echo
		if [ $ROOTPASS = $ROOTPASS_CONF ]; then
			break
		fi
		echo "Error: Password does not match."
	done
	# Create user
	while true; do
		read "?Enter username for this installation: " HOLOUSER
		if [ $HOLOUSER = "root" ]; then
			echo "User \"root\" already exists!"
		else
			break
		fi
	done
	# Setup password for user
	while true; do
		echo -n "Enter \"$HOLOUSER\" password for this installation(will not echo): "
		read -s HOLOPASS
		echo
		echo -n "Enter \"$HOLOUSER\" password for this installation(again): "
		read -s HOLOPASS_CONF
		echo
		if [ $HOLOPASS = $HOLOPASS_CONF ]; then
			break
		fi
		echo "Error: Password does not match."
	done
	echo "\nCreating user ${HOLOUSER}..."
	echo -e "${ROOTPASS}\n${ROOTPASS}" | arch-chroot ${HOLO_INSTALL_DIR} passwd root
	arch-chroot ${HOLO_INSTALL_DIR} useradd --create-home ${HOLOUSER}
	echo -e "${HOLOPASS}\n${HOLOPASS}" | arch-chroot ${HOLO_INSTALL_DIR} passwd ${HOLOUSER}
	echo "${HOLOUSER} ALL=(root) NOPASSWD:ALL" > ${HOLO_INSTALL_DIR}/etc/sudoers.d/${HOLOUSER}
	chmod 0440 ${HOLO_INSTALL_DIR}/etc/sudoers.d/${HOLOUSER}
	echo "127.0.1.1    ${HOLOHOSTNAME}" >> ${HOLO_INSTALL_DIR}/etc/hosts

	echo "\nInstalling bootloader..."
	arch-chroot ${HOLO_INSTALL_DIR} ${CMD_PACMAN_UPDATE}
	mkdir ${HOLO_INSTALL_DIR}/boot/efi
	mount -t vfat ${INSTALLDEVICE}1 ${HOLO_INSTALL_DIR}/boot/efi
	arch-chroot ${HOLO_INSTALL_DIR} ${CMD_PACMAN_INSTALL} core/grub efibootmgr inetutils mkinitcpio neofetch networkmanager sddm-wayland
	arch-chroot ${HOLO_INSTALL_DIR} systemctl enable NetworkManager systemd-timesyncd
	arch-chroot ${HOLO_INSTALL_DIR} grub-install --target=x86_64-efi --efi-directory=/boot/efi --bootloader-id=holo --removable
	cp /etc/holoinstall/10_linux ${HOLO_INSTALL_DIR}/etc/grub.d/10_linux
	cp /etc/holoinstall/grubdefault ${HOLO_INSTALL_DIR}/etc/default.grub
	arch-chroot ${HOLO_INSTALL_DIR} grub-mkconfig -o /boot/grub/grub.cfg

	echo "\nSetting up locale..."
	echo "${SYSTEM_LOCALE}" >> ${HOLO_INSTALL_DIR}/etc/locale.gen
	arch-chroot ${HOLO_INSTALL_DIR} locale-gen
	echo "LANG=$(echo ${SYSTEM_LOCALE} | cut -d' ' -f1)" > ${HOLO_INSTALL_DIR}/etc/locale.conf	
}

full_install() {
	arch-chroot ${HOLO_INSTALL_DIR} ${CMD_PACMAN_UPDATE}
	arch-chroot ${HOLO_INSTALL_DIR} ${CMD_PACMAN_INSTALL} holoiso-main holoiso-updateclient wireplumber vulkan-radeon lib32-vulkan-radeon extra/vulkan-intel multilib/lib32-vulkan-intel

	echo "\nConfiguring Steam Deck UI by default..."
	mkdir ${HOLO_INSTALL_DIR}/etc/sddm.conf.d
	echo "[General]\nDisplayServer=wayland\n\n[Autologin]\nUser=${HOLOUSER}\nSession=gamescope-wayland.desktop" >> ${HOLO_INSTALL_DIR}/etc/sddm.conf.d/autologin.conf
	mkdir /mnt/home/${HOLOUSER}/Desktop
	cp /etc/holoinstall/steamos-gamemode.desktop /mnt/home/${HOLOUSER}/Desktop/steamos-gamemode.desktop
	arch-chroot ${HOLO_INSTALL_DIR} chmod +x /home/${HOLOUSER}/Desktop/steamos-gamemode.desktop
	arch-chroot ${HOLO_INSTALL_DIR} ln -s /usr/share/applications/steam.desktop /home/${HOLOUSER}/Desktop/steam.desktop
	arch-chroot ${HOLO_INSTALL_DIR} chown -R ${HOLOUSER}:${HOLOUSER} /home/${HOLOUSER}/Desktop
	arch-chroot ${HOLO_INSTALL_DIR} systemctl enable cups bluetooth sddm
	arch-chroot ${HOLO_INSTALL_DIR} usermod -a -G rfkill ${HOLOUSER}
	arch-chroot ${HOLO_INSTALL_DIR} sudo -u ${HOLOUSER} steam
	arch-chroot ${HOLO_INSTALL_DIR} ${CMD_PACMAN_INSTALL} flatpak
	arch-chroot ${HOLO_INSTALL_DIR} flatpak remote-add --if-not-exists flathub https://dl.flathub.org/repo/flathub.flatpakrepo
}


# The installer itself. Good wuck.
echo "SteamOS 3 Installer"
echo "Start time: $(date)"
echo "Please choose installation type:"
echo "1) barebones: Barebones OS-only installation"
echo "2) deckperience: Full SteamOS 3 experience"
read "?Enter your choice here: " HOLO_INSTALL_TYPE
echo ""
if [[ "${HOLO_INSTALL_TYPE}" == "1" ]] || [[ "${HOLO_INSTALL_TYPE}" == "barebones" ]]; then
	echo "Installing SteamOS, barebones configuration..."
	base_os_install
	echo "Installation finished! You may reboot now, or type arch-chroot /mnt to make further changes"

elif [[ "${HOLO_INSTALL_TYPE}" == "2" ]]; then

	echo "Installing SteamOS, deckperience configuration..."
	base_os_install
	full_install
	echo "Installation finished! You may reboot now, or type arch-chroot /mnt to make further changes"

else
	echo "Invalid choice. Exiting installer..."
fi

echo "End time: $(date)"