imapsync/FAQ

+------------------+
| FAQ for imapsync |
+------------------+

=======================================================================
Q. Where I can read IMAP RFCs ?

R. http://www.faqs.org/rfcs/rfc3501.html

=======================================================================
Q. We have found that the sent time and date have been changed to the 
   time at which the file was synchronised. 

R. This is the case with:
   - Eudora
   - Zimbra
   - Outlook 2003
   but not with 
   - Mutt
   - Thunderbird

Eurora shows by default the time the imap server received the email.
I think it is quite a strong behavior since the messages can
have travelled some time before the reception.

The sent time and date are given by the "Date:" header
and it is set most of the time by the MUA (Mail User Agent, 
Mutt, Eudora, Thunderbird etc.).

imapsync does not touch any header since the
header is used to identify the messages in
both parts.

Solutions: 
a) Don't use buggy Eudora.
b) Use the --syncinternaldates option and keep using Eudora :-)


=======================================================================
Q. imapsync failed with a "word too long" error from the imap server,
   What can I do ?

R. Use imapsync release 1.172 or at least 1.166 with options
   --split1 500 --split2 500
   or a old old imapsync (before 1.94)

=======================================================================
Q. Does imapsync support IMAP over TLS (IMAPS)?

R. Yes natively since release 1.161. 
still, 2 ways, at least :

a) Use --ssl1 and/or --ssl2 options

--ssl1 tells imapsync to use ssl on host1
--ssl2 tells imapsync to use ssl on host2


b) Use stunnel
   http://www.stunnel.org/
   Assuming there is an imaps (993) server on imap.foo.org,
   on your localhost machine (or bar machine) run :
       stunnel -c -d imap -r imap.foo.org:imaps
   or using names instead of numbers 
       stunnel -c -d 143 -r imap.foo.org:993
   then use imapsync on localhost (or bar machine) imap (143) port.


=======================================================================
Q: How to have an imaps server ?

R. 
a) Install one 

b) or use stunnel :
   Assuming there is an imap (143) server on localhost
        stunnel  -d 993 -r 143 -f

c) or use stunnel on inetd
   imaps stream  tcp nowait cyrus /usr/sbin/stunnel -s cyrus -p /etc/ssl/certs/imapd.pem -r localhost:imap2

=======================================================================
Q: Multiple copies when I run imapsync twice ore more.

R. Multiple copies of the emails on the destination
server. Some IMAP servers (Domino for example) add some
headers for each message transfered. The message is
transfered again and again each time you run imapsync. This
is bad of course. The explanation is that imapsync considers
the message is not the same since headers have changed (one
line added) and size too (the header part). You can look at
the headers found by imapsync by using the --debug option
(and search for the message on both part). The way to avoid
this problem is by using options --skipheader and
--skipsize, like this (avoid headers beginning whith the
string "X-"):

 imapsync ... --skipheader '^X-' --skipsize

You can use --skipheader only one time; if you need to skip
several different headers use the "or" perl regex caracter
which is "|". Example:

 imapsync ... --skipheader '^X-|^Status|^Bcc'

======================================================================
Q. I want to exclude a folder hierarchy like "public"

R. Use

--exclude '^public\.'
or maybe
--exclude '^"public\.'

In the example given the character "." is the folder separator,
you can ommit it. Just take the string as it appears on the
imapsync output line :

From folders list : [INBOX] [public.dreams] [etc.]

======================================================================
Q. I want the --folder 'MyFolder' option be recurse.

R. Do not use the --folder option. 
   Instead, use --include '^MyFolder'
   Then the folder "MyFolder" and all its subfolders will be handled
   and only them.

R. Use 

--folderrec 'MyFolder'

======================================================================
Q. How to migrate from cyrus with an admin account ?

R. Use 
--ssl1 --authuser1 AdminAccount  ----password1 AdminAccountPassword

Do not forget the option --ssl1 since PLAIN auth is only
supported with tls encryption most of the time.

Here is an example:
 imapsync \
	--host1 server1 \
	--user1 joe \
	--authuser1 AdminAccount \
	--password1 AdminAccountPassword \
	--ssl1 \
	--host2 server2 \
	--user2 joe \
	--password2 joespassonserver2 \
	--exclude '^user\.'


======================================================================
Q. imapsync fails with the following error:
flags from : [\Seen NonJunk]["10-Aug-2006 13:00:30 -0400"]
Error trying to append string: 58 NO APPEND Invalid flag list

R. Flags have to begin with a \ character.
The flag "NonJunk" is not a valid flag so use for example:

imapsync ...    --regexflag 's/NonJunk//g'

======================================================================
Q. I have moved from Braunschweig to Graz, so I would like to have my whole 
Braunschweig mail sorted into a folder INBOX.Braunschweig of my new mail 
account.

R.
1) First try (safe mode):

imapsync \
 ...
 --regextrans2 's/INBOX(.*)/INBOX.Braunschweig$1/' \
 --dry --justfolders

2) See if the output says everything you want imapsync to do, 
   --dry option is safe and does nothing real.
   
3) Remove --dry 
   Check the imap folder tree on the target side

4) Remove --justfolders

=======================================================================
Q. Give examples about --regextrans2

R. Examples: 

1) To remove INBOX. in the name of destination folders:
    --regextrans2 's/^INBOX\.(.+)/$1/'

2) To sync a complete account in a subfolder called FOO:
    --regextrans2 's/^INBOX(.*)/INBOX.FOO$1/'

=======================================================================
Q. I would like to move emails from InBox to a sub-folder
called , say "2005-InBox" based on the date (Like all emails
received in the Year 2005 should be moved to the folder
called "2005-InBox").

R. 2 ways :

a) Manually:
------------

1) You create a folder INBOX.2005-INBOX
2) Mostly every email software allow sorting by date.
In inbox, you select from 1 january to 31 december
messages with the shift key.
3) Cut/paste in INBOX.2005-INBOX

b) With imapsync:
-----------------

You have to calculate the day of year (and
add 365).  For example, running it today, 
Sat Mar 11 13:06:01 CET 2006:

imapsync ... 
--host1 imap.truc.org --host2 imap.trac.org \
--user1 foo --user2 foo  \
...
--maxage 435 --minage 70 \
--regextrans2 's/^INBOX$/INBOX.2005-INBOX/' \
--folder INBOX


To know the day of year:

$ date
Sat Mar 11 13:06:01 CET 2006

$ date +%j
070

Also, you must take imapsync 1.159 at least since I tested
what I just wrote above and found 2 bugs about --mindate
--maxdate options behavior.


=======================================================================
Q. My imap server does not accept a message and warns
   "Invalid header". What is the problem ?

R. You fall in the classical mbox versus Maildir/ format
   problem. May be you use a misconfigured procmail rule.

A header beginning like the following one is in the mbox
format, header line 1 has no colon behind "From", header
lines 2 through N do have a colon :

From foo@yoyo.org  Sat Jun 22 01:10:21 2002
Return-Path: <foo@yoyo.org>
Received: ...

Any Maidir/ configured imap server may refuse this message
since its header is invalid. The first "From " line is not
valid. It lacks a colon character ":".
To solve this problem you have several solutions a) or b):

a) Remove these first "From " line manually for each message
before using imapsync. Don't think to add a colon to this
line since you will end with two "From:" lines (just look at
the other lines)

b) Run imapsync with the following option :
--regexmess 's/\AFrom \w  .*\n//'


=======================================================================
Q. I'm migrating from WU to Cyrus, and the mail folders are
under /home/user/mail but the tool copies everything in
/home/user, how can i avoid that?

R. Use
   imapsync ... --include '^mail'
or (better)
   imapsync ... --subscribed --subscribe


=======================================================================
Q. I'm migrating from WU to Cyrus, and the mail folders are
under /home/user/mail directory.  When imapsync creates the
folders in the new cyrus imap server, it makes a folder
"mail" and below that folder puts all the mail folders the
user have in /home/user/mail, i would like to have all those
folders directly under INBOX.

R. Use 
   imapsync ... --regextrans2 's/^mail/INBOX/' --dry
   look at the simulation and if all transformations seem
   good then remove the --dry option.


=======================================================================
Q. Migrating from Groupwise to Cyrus

R. By Jamie Neil:

I eventually managed to get the mail to migrate without errors using the 
following options:

--sep1 /
  - doesn't report separator so has to be set explicitly.

--nosyncacls
  - doesn't support ACLs.

--skipheader '^Content-Type'
  - MIME separator IDs seem to change every time a mail is accessed so 
this is required to stop duplicates.

--maxage 3650
  - some messages just don't seem to want to transfer and produce the 
perl errors I mentioned before. This prevents the errors, but the bad 
messages don't transfer.

Even though the mail migrated OK, there are a couple of gotchas with 
Groupwise IMAP:

1) Some of the GW folders are not real folders and are not available to 
IMAP, the main problem one being "Sent Items". I could find no way of 
coping the contents of these folders. The nearest I got was to create a 
"real" folder and copy/move the sent items into it, but imapsync still 
didn't see the messages (I think because there is something funny about 
the reported dates/sizes).
It think this problem has been rectified in GW6.5.

2) The "skipheader '^Content-Type'" directive is required to stop 
duplicate messages being created. GW seems to generate this field on the 
fly for messages that have MIME separators and so it's different every time.

3) Version 6.0.1 of the Groupwise Internet Connector sucks. I was 
getting server abends when I pushed it a bit hard! I eventually had to 
upgrade to 6.0.4 which seems to be a lot more stable.


=======================================================================
Q. Migrating from iPlanet Messaging Server
5.2 Patch 2 (built Jul 14 2004)) to Groupwise 7.0
I encounter many errors like this:
"Error trying to append string: 17847 BAD APPEND"

R. GroupWise 7 seems buggy. Apply GroupWise 7 support pack 1


=======================================================================
Q. Migrating from David Tobit V8

R. Use the following options :
imapsync ... --prefix1 INBOX. --sep1 / --subscribe

=======================================================================
Q. I need to migrate 1250 mailboxes from one cyrus-IMAP server to another
(empty) one. (Box-swap). The passwords are in a MySQL Database.
Can you tell me if your script suits my needs?

R. Partially, mailboxes must exist before running imapsync.
May be, Box-swap is not listed in "Failure stories"
nor "Success stories" in the README file.
You have to extract user and password in a csv file.
See the "HUGE MIGRATION" section in the README file.

======================================================================
Q. From Cyrus to Notes

Juhu! --useheader 'Message-ID' --skipsize does wonders! :)