Notably, add clickable link to open the widget
in its own tab. Also, allows the URL to be text-
selected so that it becomes possible to use the
selection in a browser contextual menu's "Open
in a new tab" option.
Notably, make `queryprune` option available only
to filter list authors, until there are guards
against bad filters in some future and until the
option syntax and behavior is fully settled.
Instances of `queryprune` in filter lists will be
compiled, however instances of `queryprune` in
_"My filters"_ will be ignored unless users
indicated they are a filter list author.
The important bit is now considered an action bit
so that there is no more a need for the `important`
property in the parser. The modify bit is now
considered a realm bit.
When the modify bit is set, the action bits become
available to be used to further narrow the realm.
This could be useful in the future if we want to
spread the population of modifier filters across
different buckets.
Reusing the same iterator instance for all cases
of `domain=` option parsing should reduce memory
churning.
Additonally, fine tune regex used to extract
valid token from regex-based filters to increase
likelihood of being able to extract a valid
token.
Reported internally by @gwarser.
In rare occasion, a timing issue could cause uBO to redirect
to a web accessible resource meant to be used for another
network request. This is a regression introduced with the
following commit:
- 2e5d32e967
Additionally, I identified another issue which would cause
cached redirection to fail when a cache entry with redirection
to a web accessible resource was being reused, an issue which
could especially affect pages which are generated dynamically
(i.e. without full page reload).
filterUnits is now treated as a buffer which is
pre-allocated and which will grow in chunks so as
to minimize memory allocations. Entries are never
released, just null-ed.
Additionally, move urlTokenizer into the static
network filtering engine, since it's not used
anywhere else.
Notably, defer the post-load optimization operations
to a few seconds after the filters have been all
loaded in memory -- this is not a critical step for
the filtering engine to work properly, hence this
can be delayed in order to ensure readiness as soon
as possible.
Most notably, the `denyallow=` option now requires
the presence of a valid `domain=` option to not be
rejected.
Using `denyallow=` without narrowing down using the
`domain=` option leads to catastrophic blocking
behvior, hence the requirement for a valid `domain=`
option.
Related commit:
- b265f2644d
The optimization in the commit above was meant to
improve the performance of lookup operations of
modifier filters, but I forgot to enable the
optimisation for that class of filters.
This means this commit brings another significant
performance gain on top of the previous commit, as
shown by the built-in benchmark.
Additionally a few minor code rearrangements.
Performance-related work.
There is a fair number of filters which can't be tokenized
in uBO's own filter lists. Majority of those filters also
declare a `domain=` option, examples:
*$script,redirect-rule=noopjs,domain=...
*$script,3p,domain=...,denyallow=...
*$frame,3p,domain=...
Such filters can be found in uBO's asset viewer using the
following search expression:
/^\*?\$[^\n]*?domain=/
Some filter buckets will contain many of those filters, for
instance one of the bucket holding untokenizable `redirect=`
filters has over 170 entries, which must be all visited when
collating all matching `redirect=` filters.
When a bucket contains many such filters, I found that it's
worth to extract all the non-negated hostname values from
`domain=` options into a single hntrie and perform a pre-test
at match() time to find out whether the current origin of a
network request matches any one of the collected hostnames,
so as to avoid iterating through all the filters.
Since there is rarely a match() for vast majority of network
requests with `domain=` option, this pre-test saves a good
amount of work, and this is measurable with the built-in
benchmark.
This commit moves the parsing, compiling and enforcement
of the `redirect=` and `redirect-rule=` network filter
options into the static network filtering engine as
modifier options -- just like `csp=` and `queryprune=`.
This solves the two following issues:
- https://github.com/gorhill/uBlock/issues/3590
- https://github.com/uBlockOrigin/uBlock-issues/issues/1008#issuecomment-716164214
Additionally, `redirect=` option is not longer afflicted
by static network filtering syntax quirks, `redirect=`
filters can be used with any other static filtering
modifier options, can be excepted using `@@` and can be
badfilter-ed.
Since more than one `redirect=` directives could be found
to apply to a single network request, the concept of
redirect priority is introduced.
By default, `redirect=` directives have an implicit
priority of 0. Filter authors can declare an explicit
priority by appending `:[integer]` to the token of the
`redirect=` option, for example:
||example.com/*.js$1p,script,redirect=noopjs:100
The priority dictates which redirect token out of many
will be ultimately used. Cases of multiple `redirect=`
directives applying to a single blocked network request
are expected to be rather unlikely.
Explicit redirect priority should be used if and only if
there is a case of redirect ambiguity to solve.
Related issue:
- https://github.com/uBlockOrigin/uBlock-issues/issues/760
The purpose of this new network filter option is to remove
query parameters form the URL of network requests.
The name `queryprune` has been picked over `querystrip`
since the purpose of the option is to remove some
parameters from the URL rather than all parameters.
`queryprune` is a modifier option (like `csp`) in that it
does not cause a network request to be blocked but rather
modified before being emitted.
`queryprune` must be assigned a value, which value will
determine which parameters from a query string will be
removed. The syntax for the value is that of regular
expression *except* for the following rules:
- do not wrap the regex directive between `/`
- do not use regex special values `^` and `$`
- do not use literal comma character in the value,
though you can use hex-encoded version, `\x2c`
- to match the start of a query parameter, prepend `|`
- to match the end of a query parameter, append `|`
`queryprune` regex-like values will be tested against each
key-value parameter pair as `[key]=[value]` string. This
way you can prune according to either the key, the value,
or both.
This commit introduces the concept of modifier filter
options, which as of now are:
- `csp=`
- `queryprune=`
They both work in similar way when used with `important`
option or when used in exception filters. Modifier
options can apply to any network requests, hence the
logger reports the type of the network requests, and no
longer use the modifier as the type, i.e. `csp` filters
are no longer reported as requests of type `csp`.
Though modifier options can apply to any network requests,
for the time being the `csp=` modifier option still apply
only to top or embedded (frame) documents, just as before.
In some future we may want to apply `csp=` directives to
network requests of type script, to control the behavior
of service workers for example.
A new built-in filter expression has been added to the
logger: "modified", which allow to see all the network
requests which were modified before being emitted. The
translation work for this new option will be available
in a future commit.
Additionally, add a button in the About pane
to launch benchmark sessions. The button will
be available only when advanced setting
`benchmarkDatasetURL` is set and pointing to
a valid dataset.
Related issues:
- https://github.com/gorhill/uBlock/issues/1390
- https://github.com/gorhill/uBlock/issues/2334
The deadline to interactively load a specific media
element has been extended from 2sec to 5sec.
Clicking over a blocked large media element will cause
uBO to lookup and handle all potentially blocked large
elements at the cursor position. This should take care
of being able to unblock media elements hidden under
other DOM object.
The CSS style applied to blocked large media elements
has been fine tuned to improve interactivity.
uBO will now remember the specific media elements which
were unblocked and keep them exempted from being
further blocked. This would be an issue when unblocking
a video and then a bit later seeking to another point
in the video, in which case uBO would again block
network requests for that video.
The specificity slider will now be more intuitive
by ordering candidates by match count from highest
match count to the left to the lowest match count
to the right.
Candidates with same match counts will be discarded
and replaced with the shortest candidate.
Related issue:
- https://github.com/uBlockOrigin/uBlock-issues/issues/1134
Double-clicking on...
... a filter option will cause the option to be
wholly selected, including `=[value]` if present;
... a value assigned to a filter option will cause
the value to be wholly selected, except when the
value is a hostname/entity, in which case all the
labels from the cursor position to the right-most
label will be selected.
This allows to bring in all the benefits of
syntax highlighting and enhanced editing
features in the element picker, like auto-
completion, etc.
This is also a necessary step to possibly solve
the following issue:
- https://github.com/gorhill/uBlock/issues/2035
Additionally, incrementally improved the behavior
of uBO's custom CodeMirror static filtering syntax
mode when double-clicking somewhere in a static
extended filter:
- on a class/id string will cause the whole
class/id string to be selected, including the
prepending `.`/`#`.
- somewhere in a hostname/entity will cause all
the labels from the cursor position to the
right-most label to be selected (subject to
change/fine-tune as per feedback of filter
list maintainers).
Related feedback:
- https://github.com/uBlockOrigin/uBlock-issues/issues/1134#issuecomment-679421316
The redirectable resource has been renamed
`click2load.html`, so as to avoid uses of dash
characters and to also allow for future different
click-to-load resources.
Additionally, as a requirement to support click-to-load
feature, redirected resources will from now on no
longer be collapsed.
Related issues:
- https://github.com/gorhill/uBlock/issues/2688
- https://github.com/gorhill/uBlock/issues/3619
- https://github.com/gorhill/uBlock/issues/1899
This new feature should considered in its draft
stage and it needs to be fine-tuned as per
feedback.
Important: Only embedded frames can be converted
into click-to-load widgets, as only these can be
properly shieded from access by page content.
Examples of usage:
||youtube.com/embed/$3p,frame,redirect=clicktoload
||scribd.com/embeds/$3p,frame,redirect=clicktoload
||player.vimeo.com/video/$3p,frame,redirect=clicktoload
Related feedback:
- https://github.com/uBlockOrigin/uBlock-issues/issues/401#issuecomment-703075797
Name: `uiTheme`
Default: `unset`
Values:
- `unset`: uBO will pick the theme according to
browser's `prefers-color-scheme`
- `light`: force light scheme
- `dark`: force dark theme
This advanced setting is not to be documented yet as
it has not been decided this is a long term solution.
Double-cliking on a URL will cause the whole URL to be
selected, thus making it easier to navigate to this
URL (through your browser "Open in new tab" entry in
contextual menu).
Unrecognized scriptlet names will be highlighted so as
to warn that the filter is not going to be effective.
Injecting declarative CSS `:style()` selector could cause
the instatiation of the procedural filterer, even when
there was no actual procedural cosmetic filter to
enforce.
This commit ensure that the procedural cosmetic filterer
is instantiated only when there are actual procedural
filters to enforce.
Related issue:
- https://github.com/uBlockOrigin/uBlock-issues/issues/763
Changes:
From now on, uBO will allow click-to-subscribe on only
a few select domains, currently:
- https://filterlists.com/
- https://github.com/
- https://github.io/
More domains can be added if and only the demonstration
is made that more than a marginal number of filter lists
can be subscribed from those domains.
The browser alert box is no longer used to confirm
subscription to a filter list. Instead, the asset
viewer has been expanded to serve that purpose. This
way, users can peruse at the content of a filter list
before subscribing to it.
Now that the element picker user interface is isolated
frompage content world, there is no need to use the
`important` modifier for the element picker's own
CSS styles.
Further iterating on the work done in following commit:
- 1268f0ae43
This commit adds a new widget to the element picker to
control the depth of a cosmetic filter selector. The
new widget is essentially just another way of selecting
the depth, which is still controllable through picking
one of the cosmetic filters in the list of candidates.
