[RegAllocGreedy] Introduce a late pass to repair broken hints.
A broken hint is a copy where both ends are assigned different colors. When a
variable gets evicted in the neighborhood of such copies, it is likely we can
reconcile some of them.
** Context **
Copies are inserted during the register allocation via splitting. These split
points are required to relax the constraints on the allocation problem. When
such a point is inserted, both ends of the copy would not share the same color
with respect to the current allocation problem. When variables get evicted,
the allocation problem becomes different and some split point may not be
required anymore. However, the related variables may already have been colored.
This usually shows up in the assembly with pattern like this:
def A
...
save A to B
def A
use A
restore A from B
...
use B
Whereas we could simply have done:
def B
...
def A
use A
...
use B
** Proposed Solution **
A variable having a broken hint is marked for late recoloring if and only if
selecting a register for it evict another variable. Indeed, if no eviction
happens this is pointless to look for recoloring opportunities as it means the
situation was the same as the initial allocation problem where we had to break
the hint.
Finally, when everything has been allocated, we look for recoloring
opportunities for all the identified candidates.
The recoloring is performed very late to rely on accurate copy cost (all
involved variables are allocated).
The recoloring is simple unlike the last change recoloring. It propagates the
color of the broken hint to all its copy-related variables. If the color is
available for them, the recoloring uses it, otherwise it gives up on that hint
even if a more complex coloring would have worked.
The recoloring happens only if it is profitable. The profitability is evaluated
using the expected frequency of the copies of the currently recolored variable
with a) its current color and b) with the target color. If a) is greater or
equal than b), then it is profitable and the recoloring happen.
** Example **
Consider the following example:
BB1:
a =
b =
BB2:
...
= b
= a
Let us assume b gets split:
BB1:
a =
b =
BB2:
c = b
...
d = c
= d
= a
Because of how the allocation work, b, c, and d may be assigned different
colors. Now, if a gets evicted to make room for c, assuming b and d were
assigned to something different than a.
We end up with:
BB1:
a =
st a, SpillSlot
b =
BB2:
c = b
...
d = c
= d
e = ld SpillSlot
= e
This is likely that we can assign the same register for b, c, and d,
getting rid of 2 copies.
** Performances **
Both ARM64 and x86_64 show performance improvements of up to 3% for the
llvm-testsuite + externals with Os and O3. There are a few regressions too that
comes from the (in)accuracy of the block frequency estimate.
<rdar://problem/18312047>
llvm-svn: 225422
2015-01-08 02:16:39 +01:00
|
|
|
; RUN: llc < %s -o - -mtriple=x86_64-apple-macosx | FileCheck %s
|
|
|
|
|
; Test case for the recoloring of broken hints.
|
|
|
|
|
; This is tricky to have something reasonably small to kick this optimization since
|
|
|
|
|
; it requires that spliting and spilling occur.
|
|
|
|
|
; The bottom line is that this test case is fragile.
|
|
|
|
|
; This was reduced from the make_list function from the llvm-testsuite:
|
|
|
|
|
; SingleSource/Benchmarks/McGill/chomp.c
|
|
|
|
|
|
|
|
|
|
target datalayout = "e-m:o-i64:64-f80:128-n8:16:32:64-S128"
|
|
|
|
|
target triple = "x86_64-apple-macosx10.9.0"
|
|
|
|
|
|
|
|
|
|
%struct._list = type { i32*, %struct._list* }
|
|
|
|
|
|
|
|
|
|
@ncol = external global i32, align 4
|
|
|
|
|
@nrow = external global i32, align 4
|
|
|
|
|
|
|
|
|
|
declare noalias i32* @copy_data()
|
|
|
|
|
|
|
|
|
|
declare noalias i8* @malloc(i64)
|
|
|
|
|
|
|
|
|
|
declare i32 @get_value()
|
|
|
|
|
|
|
|
|
|
declare i32 @in_wanted(i32* nocapture readonly)
|
|
|
|
|
|
|
|
|
|
declare noalias i32* @make_data()
|
|
|
|
|
|
|
|
|
|
; CHECK-LABEL: make_list:
|
|
|
|
|
; Function prologue.
|
|
|
|
|
; CHECK: pushq
|
|
|
|
|
; CHECK: subq ${{[0-9]+}}, %rsp
|
|
|
|
|
; Move the first argument (%data) into a temporary register.
|
|
|
|
|
; It will not survive the call to malloc otherwise.
|
|
|
|
|
; CHECK: movq %rdi, [[ARG1:%r[0-9a-z]+]]
|
|
|
|
|
; CHECK: callq _malloc
|
|
|
|
|
; Compute %data - 1 as used for load in land.rhs.i (via the variable %indvars.iv.next.i).
|
|
|
|
|
; CHECK: addq $-4, [[ARG1]]
|
|
|
|
|
; We use to produce a useless copy here and move %data in another temporary register.
|
|
|
|
|
; CHECK-NOT: movq [[ARG1]]
|
|
|
|
|
; End of the first basic block.
|
|
|
|
|
; CHECK: .align
|
|
|
|
|
; Now check that %data is used in an address computation.
|
|
|
|
|
; CHECK: leaq ([[ARG1]]
|
|
|
|
|
define %struct._list* @make_list(i32* nocapture readonly %data, i32* nocapture %value, i32* nocapture %all) {
|
|
|
|
|
entry:
|
|
|
|
|
%call = tail call i8* @malloc(i64 16)
|
[opaque pointer type] Add textual IR support for explicit type parameter to getelementptr instruction
One of several parallel first steps to remove the target type of pointers,
replacing them with a single opaque pointer type.
This adds an explicit type parameter to the gep instruction so that when the
first parameter becomes an opaque pointer type, the type to gep through is
still available to the instructions.
* This doesn't modify gep operators, only instructions (operators will be
handled separately)
* Textual IR changes only. Bitcode (including upgrade) and changing the
in-memory representation will be in separate changes.
* geps of vectors are transformed as:
getelementptr <4 x float*> %x, ...
->getelementptr float, <4 x float*> %x, ...
Then, once the opaque pointer type is introduced, this will ultimately look
like:
getelementptr float, <4 x ptr> %x
with the unambiguous interpretation that it is a vector of pointers to float.
* address spaces remain on the pointer, not the type:
getelementptr float addrspace(1)* %x
->getelementptr float, float addrspace(1)* %x
Then, eventually:
getelementptr float, ptr addrspace(1) %x
Importantly, the massive amount of test case churn has been automated by
same crappy python code. I had to manually update a few test cases that
wouldn't fit the script's model (r228970,r229196,r229197,r229198). The
python script just massages stdin and writes the result to stdout, I
then wrapped that in a shell script to handle replacing files, then
using the usual find+xargs to migrate all the files.
update.py:
import fileinput
import sys
import re
ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))")
normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))")
def conv(match, line):
if not match:
return line
line = match.groups()[0]
if len(match.groups()[5]) == 0:
line += match.groups()[2]
line += match.groups()[3]
line += ", "
line += match.groups()[1]
line += "\n"
return line
for line in sys.stdin:
if line.find("getelementptr ") == line.find("getelementptr inbounds"):
if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("):
line = conv(re.match(ibrep, line), line)
elif line.find("getelementptr ") != line.find("getelementptr ("):
line = conv(re.match(normrep, line), line)
sys.stdout.write(line)
apply.sh:
for name in "$@"
do
python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name"
rm -f "$name.tmp"
done
The actual commands:
From llvm/src:
find test/ -name *.ll | xargs ./apply.sh
From llvm/src/tools/clang:
find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}"
From llvm/src/tools/polly:
find test/ -name *.ll | xargs ./apply.sh
After that, check-all (with llvm, clang, clang-tools-extra, lld,
compiler-rt, and polly all checked out).
The extra 'rm' in the apply.sh script is due to a few files in clang's test
suite using interesting unicode stuff that my python script was throwing
exceptions on. None of those files needed to be migrated, so it seemed
sufficient to ignore those cases.
Reviewers: rafael, dexonsmith, grosser
Differential Revision: http://reviews.llvm.org/D7636
llvm-svn: 230786
2015-02-27 20:29:02 +01:00
|
|
|
%next = getelementptr inbounds i8, i8* %call, i64 8
|
[RegAllocGreedy] Introduce a late pass to repair broken hints.
A broken hint is a copy where both ends are assigned different colors. When a
variable gets evicted in the neighborhood of such copies, it is likely we can
reconcile some of them.
** Context **
Copies are inserted during the register allocation via splitting. These split
points are required to relax the constraints on the allocation problem. When
such a point is inserted, both ends of the copy would not share the same color
with respect to the current allocation problem. When variables get evicted,
the allocation problem becomes different and some split point may not be
required anymore. However, the related variables may already have been colored.
This usually shows up in the assembly with pattern like this:
def A
...
save A to B
def A
use A
restore A from B
...
use B
Whereas we could simply have done:
def B
...
def A
use A
...
use B
** Proposed Solution **
A variable having a broken hint is marked for late recoloring if and only if
selecting a register for it evict another variable. Indeed, if no eviction
happens this is pointless to look for recoloring opportunities as it means the
situation was the same as the initial allocation problem where we had to break
the hint.
Finally, when everything has been allocated, we look for recoloring
opportunities for all the identified candidates.
The recoloring is performed very late to rely on accurate copy cost (all
involved variables are allocated).
The recoloring is simple unlike the last change recoloring. It propagates the
color of the broken hint to all its copy-related variables. If the color is
available for them, the recoloring uses it, otherwise it gives up on that hint
even if a more complex coloring would have worked.
The recoloring happens only if it is profitable. The profitability is evaluated
using the expected frequency of the copies of the currently recolored variable
with a) its current color and b) with the target color. If a) is greater or
equal than b), then it is profitable and the recoloring happen.
** Example **
Consider the following example:
BB1:
a =
b =
BB2:
...
= b
= a
Let us assume b gets split:
BB1:
a =
b =
BB2:
c = b
...
d = c
= d
= a
Because of how the allocation work, b, c, and d may be assigned different
colors. Now, if a gets evicted to make room for c, assuming b and d were
assigned to something different than a.
We end up with:
BB1:
a =
st a, SpillSlot
b =
BB2:
c = b
...
d = c
= d
e = ld SpillSlot
= e
This is likely that we can assign the same register for b, c, and d,
getting rid of 2 copies.
** Performances **
Both ARM64 and x86_64 show performance improvements of up to 3% for the
llvm-testsuite + externals with Os and O3. There are a few regressions too that
comes from the (in)accuracy of the block frequency estimate.
<rdar://problem/18312047>
llvm-svn: 225422
2015-01-08 02:16:39 +01:00
|
|
|
%tmp = bitcast i8* %next to %struct._list**
|
|
|
|
|
%tmp2 = bitcast i8* %call to %struct._list*
|
2015-02-27 22:17:42 +01:00
|
|
|
%.pre78 = load i32, i32* @ncol, align 4
|
[RegAllocGreedy] Introduce a late pass to repair broken hints.
A broken hint is a copy where both ends are assigned different colors. When a
variable gets evicted in the neighborhood of such copies, it is likely we can
reconcile some of them.
** Context **
Copies are inserted during the register allocation via splitting. These split
points are required to relax the constraints on the allocation problem. When
such a point is inserted, both ends of the copy would not share the same color
with respect to the current allocation problem. When variables get evicted,
the allocation problem becomes different and some split point may not be
required anymore. However, the related variables may already have been colored.
This usually shows up in the assembly with pattern like this:
def A
...
save A to B
def A
use A
restore A from B
...
use B
Whereas we could simply have done:
def B
...
def A
use A
...
use B
** Proposed Solution **
A variable having a broken hint is marked for late recoloring if and only if
selecting a register for it evict another variable. Indeed, if no eviction
happens this is pointless to look for recoloring opportunities as it means the
situation was the same as the initial allocation problem where we had to break
the hint.
Finally, when everything has been allocated, we look for recoloring
opportunities for all the identified candidates.
The recoloring is performed very late to rely on accurate copy cost (all
involved variables are allocated).
The recoloring is simple unlike the last change recoloring. It propagates the
color of the broken hint to all its copy-related variables. If the color is
available for them, the recoloring uses it, otherwise it gives up on that hint
even if a more complex coloring would have worked.
The recoloring happens only if it is profitable. The profitability is evaluated
using the expected frequency of the copies of the currently recolored variable
with a) its current color and b) with the target color. If a) is greater or
equal than b), then it is profitable and the recoloring happen.
** Example **
Consider the following example:
BB1:
a =
b =
BB2:
...
= b
= a
Let us assume b gets split:
BB1:
a =
b =
BB2:
c = b
...
d = c
= d
= a
Because of how the allocation work, b, c, and d may be assigned different
colors. Now, if a gets evicted to make room for c, assuming b and d were
assigned to something different than a.
We end up with:
BB1:
a =
st a, SpillSlot
b =
BB2:
c = b
...
d = c
= d
e = ld SpillSlot
= e
This is likely that we can assign the same register for b, c, and d,
getting rid of 2 copies.
** Performances **
Both ARM64 and x86_64 show performance improvements of up to 3% for the
llvm-testsuite + externals with Os and O3. There are a few regressions too that
comes from the (in)accuracy of the block frequency estimate.
<rdar://problem/18312047>
llvm-svn: 225422
2015-01-08 02:16:39 +01:00
|
|
|
br label %for.cond1.preheader
|
|
|
|
|
|
|
|
|
|
for.cond1.preheader: ; preds = %for.inc32, %entry
|
|
|
|
|
%tmp4 = phi i32 [ %.pre78, %entry ], [ 0, %for.inc32 ]
|
|
|
|
|
%current.077 = phi %struct._list* [ %tmp2, %entry ], [ %current.1.lcssa, %for.inc32 ]
|
|
|
|
|
%cmp270 = icmp eq i32 %tmp4, 0
|
|
|
|
|
br i1 %cmp270, label %for.inc32, label %for.body3
|
|
|
|
|
|
|
|
|
|
for.body3: ; preds = %if.end31, %for.cond1.preheader
|
|
|
|
|
%current.173 = phi %struct._list* [ %current.2, %if.end31 ], [ %current.077, %for.cond1.preheader ]
|
|
|
|
|
%row.172 = phi i32 [ %row.3, %if.end31 ], [ 0, %for.cond1.preheader ]
|
|
|
|
|
%col.071 = phi i32 [ %inc, %if.end31 ], [ 0, %for.cond1.preheader ]
|
|
|
|
|
%call4 = tail call i32* @make_data()
|
2015-02-27 22:17:42 +01:00
|
|
|
%tmp5 = load i32, i32* @ncol, align 4
|
[RegAllocGreedy] Introduce a late pass to repair broken hints.
A broken hint is a copy where both ends are assigned different colors. When a
variable gets evicted in the neighborhood of such copies, it is likely we can
reconcile some of them.
** Context **
Copies are inserted during the register allocation via splitting. These split
points are required to relax the constraints on the allocation problem. When
such a point is inserted, both ends of the copy would not share the same color
with respect to the current allocation problem. When variables get evicted,
the allocation problem becomes different and some split point may not be
required anymore. However, the related variables may already have been colored.
This usually shows up in the assembly with pattern like this:
def A
...
save A to B
def A
use A
restore A from B
...
use B
Whereas we could simply have done:
def B
...
def A
use A
...
use B
** Proposed Solution **
A variable having a broken hint is marked for late recoloring if and only if
selecting a register for it evict another variable. Indeed, if no eviction
happens this is pointless to look for recoloring opportunities as it means the
situation was the same as the initial allocation problem where we had to break
the hint.
Finally, when everything has been allocated, we look for recoloring
opportunities for all the identified candidates.
The recoloring is performed very late to rely on accurate copy cost (all
involved variables are allocated).
The recoloring is simple unlike the last change recoloring. It propagates the
color of the broken hint to all its copy-related variables. If the color is
available for them, the recoloring uses it, otherwise it gives up on that hint
even if a more complex coloring would have worked.
The recoloring happens only if it is profitable. The profitability is evaluated
using the expected frequency of the copies of the currently recolored variable
with a) its current color and b) with the target color. If a) is greater or
equal than b), then it is profitable and the recoloring happen.
** Example **
Consider the following example:
BB1:
a =
b =
BB2:
...
= b
= a
Let us assume b gets split:
BB1:
a =
b =
BB2:
c = b
...
d = c
= d
= a
Because of how the allocation work, b, c, and d may be assigned different
colors. Now, if a gets evicted to make room for c, assuming b and d were
assigned to something different than a.
We end up with:
BB1:
a =
st a, SpillSlot
b =
BB2:
c = b
...
d = c
= d
e = ld SpillSlot
= e
This is likely that we can assign the same register for b, c, and d,
getting rid of 2 copies.
** Performances **
Both ARM64 and x86_64 show performance improvements of up to 3% for the
llvm-testsuite + externals with Os and O3. There are a few regressions too that
comes from the (in)accuracy of the block frequency estimate.
<rdar://problem/18312047>
llvm-svn: 225422
2015-01-08 02:16:39 +01:00
|
|
|
%tobool14.i = icmp eq i32 %tmp5, 0
|
|
|
|
|
br i1 %tobool14.i, label %while.cond.i, label %while.body.lr.ph.i
|
|
|
|
|
|
|
|
|
|
while.body.lr.ph.i: ; preds = %for.body3
|
|
|
|
|
%tmp6 = sext i32 %tmp5 to i64
|
|
|
|
|
br label %while.body.i
|
|
|
|
|
|
|
|
|
|
while.body.i: ; preds = %while.body.i, %while.body.lr.ph.i
|
|
|
|
|
%indvars.iv.i = phi i64 [ %tmp6, %while.body.lr.ph.i ], [ %indvars.iv.next.i, %while.body.i ]
|
|
|
|
|
%indvars.iv.next.i = add nsw i64 %indvars.iv.i, -1
|
|
|
|
|
%tmp9 = trunc i64 %indvars.iv.next.i to i32
|
|
|
|
|
%tobool.i = icmp eq i32 %tmp9, 0
|
|
|
|
|
br i1 %tobool.i, label %while.cond.i, label %while.body.i
|
|
|
|
|
|
|
|
|
|
while.cond.i: ; preds = %land.rhs.i, %while.body.i, %for.body3
|
|
|
|
|
%indvars.iv.i64 = phi i64 [ %indvars.iv.next.i65, %land.rhs.i ], [ 0, %for.body3 ], [ %tmp6, %while.body.i ]
|
|
|
|
|
%indvars.iv.next.i65 = add nsw i64 %indvars.iv.i64, -1
|
|
|
|
|
%tmp10 = trunc i64 %indvars.iv.i64 to i32
|
|
|
|
|
%tobool.i66 = icmp eq i32 %tmp10, 0
|
|
|
|
|
br i1 %tobool.i66, label %if.else, label %land.rhs.i
|
|
|
|
|
|
|
|
|
|
land.rhs.i: ; preds = %while.cond.i
|
[opaque pointer type] Add textual IR support for explicit type parameter to getelementptr instruction
One of several parallel first steps to remove the target type of pointers,
replacing them with a single opaque pointer type.
This adds an explicit type parameter to the gep instruction so that when the
first parameter becomes an opaque pointer type, the type to gep through is
still available to the instructions.
* This doesn't modify gep operators, only instructions (operators will be
handled separately)
* Textual IR changes only. Bitcode (including upgrade) and changing the
in-memory representation will be in separate changes.
* geps of vectors are transformed as:
getelementptr <4 x float*> %x, ...
->getelementptr float, <4 x float*> %x, ...
Then, once the opaque pointer type is introduced, this will ultimately look
like:
getelementptr float, <4 x ptr> %x
with the unambiguous interpretation that it is a vector of pointers to float.
* address spaces remain on the pointer, not the type:
getelementptr float addrspace(1)* %x
->getelementptr float, float addrspace(1)* %x
Then, eventually:
getelementptr float, ptr addrspace(1) %x
Importantly, the massive amount of test case churn has been automated by
same crappy python code. I had to manually update a few test cases that
wouldn't fit the script's model (r228970,r229196,r229197,r229198). The
python script just massages stdin and writes the result to stdout, I
then wrapped that in a shell script to handle replacing files, then
using the usual find+xargs to migrate all the files.
update.py:
import fileinput
import sys
import re
ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))")
normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))")
def conv(match, line):
if not match:
return line
line = match.groups()[0]
if len(match.groups()[5]) == 0:
line += match.groups()[2]
line += match.groups()[3]
line += ", "
line += match.groups()[1]
line += "\n"
return line
for line in sys.stdin:
if line.find("getelementptr ") == line.find("getelementptr inbounds"):
if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("):
line = conv(re.match(ibrep, line), line)
elif line.find("getelementptr ") != line.find("getelementptr ("):
line = conv(re.match(normrep, line), line)
sys.stdout.write(line)
apply.sh:
for name in "$@"
do
python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name"
rm -f "$name.tmp"
done
The actual commands:
From llvm/src:
find test/ -name *.ll | xargs ./apply.sh
From llvm/src/tools/clang:
find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}"
From llvm/src/tools/polly:
find test/ -name *.ll | xargs ./apply.sh
After that, check-all (with llvm, clang, clang-tools-extra, lld,
compiler-rt, and polly all checked out).
The extra 'rm' in the apply.sh script is due to a few files in clang's test
suite using interesting unicode stuff that my python script was throwing
exceptions on. None of those files needed to be migrated, so it seemed
sufficient to ignore those cases.
Reviewers: rafael, dexonsmith, grosser
Differential Revision: http://reviews.llvm.org/D7636
llvm-svn: 230786
2015-02-27 20:29:02 +01:00
|
|
|
%arrayidx.i67 = getelementptr inbounds i32, i32* %call4, i64 %indvars.iv.next.i65
|
2015-02-27 22:17:42 +01:00
|
|
|
%tmp11 = load i32, i32* %arrayidx.i67, align 4
|
[opaque pointer type] Add textual IR support for explicit type parameter to getelementptr instruction
One of several parallel first steps to remove the target type of pointers,
replacing them with a single opaque pointer type.
This adds an explicit type parameter to the gep instruction so that when the
first parameter becomes an opaque pointer type, the type to gep through is
still available to the instructions.
* This doesn't modify gep operators, only instructions (operators will be
handled separately)
* Textual IR changes only. Bitcode (including upgrade) and changing the
in-memory representation will be in separate changes.
* geps of vectors are transformed as:
getelementptr <4 x float*> %x, ...
->getelementptr float, <4 x float*> %x, ...
Then, once the opaque pointer type is introduced, this will ultimately look
like:
getelementptr float, <4 x ptr> %x
with the unambiguous interpretation that it is a vector of pointers to float.
* address spaces remain on the pointer, not the type:
getelementptr float addrspace(1)* %x
->getelementptr float, float addrspace(1)* %x
Then, eventually:
getelementptr float, ptr addrspace(1) %x
Importantly, the massive amount of test case churn has been automated by
same crappy python code. I had to manually update a few test cases that
wouldn't fit the script's model (r228970,r229196,r229197,r229198). The
python script just massages stdin and writes the result to stdout, I
then wrapped that in a shell script to handle replacing files, then
using the usual find+xargs to migrate all the files.
update.py:
import fileinput
import sys
import re
ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))")
normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))")
def conv(match, line):
if not match:
return line
line = match.groups()[0]
if len(match.groups()[5]) == 0:
line += match.groups()[2]
line += match.groups()[3]
line += ", "
line += match.groups()[1]
line += "\n"
return line
for line in sys.stdin:
if line.find("getelementptr ") == line.find("getelementptr inbounds"):
if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("):
line = conv(re.match(ibrep, line), line)
elif line.find("getelementptr ") != line.find("getelementptr ("):
line = conv(re.match(normrep, line), line)
sys.stdout.write(line)
apply.sh:
for name in "$@"
do
python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name"
rm -f "$name.tmp"
done
The actual commands:
From llvm/src:
find test/ -name *.ll | xargs ./apply.sh
From llvm/src/tools/clang:
find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}"
From llvm/src/tools/polly:
find test/ -name *.ll | xargs ./apply.sh
After that, check-all (with llvm, clang, clang-tools-extra, lld,
compiler-rt, and polly all checked out).
The extra 'rm' in the apply.sh script is due to a few files in clang's test
suite using interesting unicode stuff that my python script was throwing
exceptions on. None of those files needed to be migrated, so it seemed
sufficient to ignore those cases.
Reviewers: rafael, dexonsmith, grosser
Differential Revision: http://reviews.llvm.org/D7636
llvm-svn: 230786
2015-02-27 20:29:02 +01:00
|
|
|
%arrayidx2.i68 = getelementptr inbounds i32, i32* %data, i64 %indvars.iv.next.i65
|
2015-02-27 22:17:42 +01:00
|
|
|
%tmp12 = load i32, i32* %arrayidx2.i68, align 4
|
[RegAllocGreedy] Introduce a late pass to repair broken hints.
A broken hint is a copy where both ends are assigned different colors. When a
variable gets evicted in the neighborhood of such copies, it is likely we can
reconcile some of them.
** Context **
Copies are inserted during the register allocation via splitting. These split
points are required to relax the constraints on the allocation problem. When
such a point is inserted, both ends of the copy would not share the same color
with respect to the current allocation problem. When variables get evicted,
the allocation problem becomes different and some split point may not be
required anymore. However, the related variables may already have been colored.
This usually shows up in the assembly with pattern like this:
def A
...
save A to B
def A
use A
restore A from B
...
use B
Whereas we could simply have done:
def B
...
def A
use A
...
use B
** Proposed Solution **
A variable having a broken hint is marked for late recoloring if and only if
selecting a register for it evict another variable. Indeed, if no eviction
happens this is pointless to look for recoloring opportunities as it means the
situation was the same as the initial allocation problem where we had to break
the hint.
Finally, when everything has been allocated, we look for recoloring
opportunities for all the identified candidates.
The recoloring is performed very late to rely on accurate copy cost (all
involved variables are allocated).
The recoloring is simple unlike the last change recoloring. It propagates the
color of the broken hint to all its copy-related variables. If the color is
available for them, the recoloring uses it, otherwise it gives up on that hint
even if a more complex coloring would have worked.
The recoloring happens only if it is profitable. The profitability is evaluated
using the expected frequency of the copies of the currently recolored variable
with a) its current color and b) with the target color. If a) is greater or
equal than b), then it is profitable and the recoloring happen.
** Example **
Consider the following example:
BB1:
a =
b =
BB2:
...
= b
= a
Let us assume b gets split:
BB1:
a =
b =
BB2:
c = b
...
d = c
= d
= a
Because of how the allocation work, b, c, and d may be assigned different
colors. Now, if a gets evicted to make room for c, assuming b and d were
assigned to something different than a.
We end up with:
BB1:
a =
st a, SpillSlot
b =
BB2:
c = b
...
d = c
= d
e = ld SpillSlot
= e
This is likely that we can assign the same register for b, c, and d,
getting rid of 2 copies.
** Performances **
Both ARM64 and x86_64 show performance improvements of up to 3% for the
llvm-testsuite + externals with Os and O3. There are a few regressions too that
comes from the (in)accuracy of the block frequency estimate.
<rdar://problem/18312047>
llvm-svn: 225422
2015-01-08 02:16:39 +01:00
|
|
|
%cmp.i69 = icmp eq i32 %tmp11, %tmp12
|
|
|
|
|
br i1 %cmp.i69, label %while.cond.i, label %equal_data.exit
|
|
|
|
|
|
|
|
|
|
equal_data.exit: ; preds = %land.rhs.i
|
|
|
|
|
%cmp3.i = icmp slt i32 %tmp10, 1
|
|
|
|
|
br i1 %cmp3.i, label %if.else, label %if.then
|
|
|
|
|
|
|
|
|
|
if.then: ; preds = %equal_data.exit
|
[opaque pointer type] Add textual IR support for explicit type parameter to getelementptr instruction
One of several parallel first steps to remove the target type of pointers,
replacing them with a single opaque pointer type.
This adds an explicit type parameter to the gep instruction so that when the
first parameter becomes an opaque pointer type, the type to gep through is
still available to the instructions.
* This doesn't modify gep operators, only instructions (operators will be
handled separately)
* Textual IR changes only. Bitcode (including upgrade) and changing the
in-memory representation will be in separate changes.
* geps of vectors are transformed as:
getelementptr <4 x float*> %x, ...
->getelementptr float, <4 x float*> %x, ...
Then, once the opaque pointer type is introduced, this will ultimately look
like:
getelementptr float, <4 x ptr> %x
with the unambiguous interpretation that it is a vector of pointers to float.
* address spaces remain on the pointer, not the type:
getelementptr float addrspace(1)* %x
->getelementptr float, float addrspace(1)* %x
Then, eventually:
getelementptr float, ptr addrspace(1) %x
Importantly, the massive amount of test case churn has been automated by
same crappy python code. I had to manually update a few test cases that
wouldn't fit the script's model (r228970,r229196,r229197,r229198). The
python script just massages stdin and writes the result to stdout, I
then wrapped that in a shell script to handle replacing files, then
using the usual find+xargs to migrate all the files.
update.py:
import fileinput
import sys
import re
ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))")
normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))")
def conv(match, line):
if not match:
return line
line = match.groups()[0]
if len(match.groups()[5]) == 0:
line += match.groups()[2]
line += match.groups()[3]
line += ", "
line += match.groups()[1]
line += "\n"
return line
for line in sys.stdin:
if line.find("getelementptr ") == line.find("getelementptr inbounds"):
if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("):
line = conv(re.match(ibrep, line), line)
elif line.find("getelementptr ") != line.find("getelementptr ("):
line = conv(re.match(normrep, line), line)
sys.stdout.write(line)
apply.sh:
for name in "$@"
do
python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name"
rm -f "$name.tmp"
done
The actual commands:
From llvm/src:
find test/ -name *.ll | xargs ./apply.sh
From llvm/src/tools/clang:
find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}"
From llvm/src/tools/polly:
find test/ -name *.ll | xargs ./apply.sh
After that, check-all (with llvm, clang, clang-tools-extra, lld,
compiler-rt, and polly all checked out).
The extra 'rm' in the apply.sh script is due to a few files in clang's test
suite using interesting unicode stuff that my python script was throwing
exceptions on. None of those files needed to be migrated, so it seemed
sufficient to ignore those cases.
Reviewers: rafael, dexonsmith, grosser
Differential Revision: http://reviews.llvm.org/D7636
llvm-svn: 230786
2015-02-27 20:29:02 +01:00
|
|
|
%next7 = getelementptr inbounds %struct._list, %struct._list* %current.173, i64 0, i32 1
|
2015-02-27 22:17:42 +01:00
|
|
|
%tmp14 = load %struct._list*, %struct._list** %next7, align 8
|
[opaque pointer type] Add textual IR support for explicit type parameter to getelementptr instruction
One of several parallel first steps to remove the target type of pointers,
replacing them with a single opaque pointer type.
This adds an explicit type parameter to the gep instruction so that when the
first parameter becomes an opaque pointer type, the type to gep through is
still available to the instructions.
* This doesn't modify gep operators, only instructions (operators will be
handled separately)
* Textual IR changes only. Bitcode (including upgrade) and changing the
in-memory representation will be in separate changes.
* geps of vectors are transformed as:
getelementptr <4 x float*> %x, ...
->getelementptr float, <4 x float*> %x, ...
Then, once the opaque pointer type is introduced, this will ultimately look
like:
getelementptr float, <4 x ptr> %x
with the unambiguous interpretation that it is a vector of pointers to float.
* address spaces remain on the pointer, not the type:
getelementptr float addrspace(1)* %x
->getelementptr float, float addrspace(1)* %x
Then, eventually:
getelementptr float, ptr addrspace(1) %x
Importantly, the massive amount of test case churn has been automated by
same crappy python code. I had to manually update a few test cases that
wouldn't fit the script's model (r228970,r229196,r229197,r229198). The
python script just massages stdin and writes the result to stdout, I
then wrapped that in a shell script to handle replacing files, then
using the usual find+xargs to migrate all the files.
update.py:
import fileinput
import sys
import re
ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))")
normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))")
def conv(match, line):
if not match:
return line
line = match.groups()[0]
if len(match.groups()[5]) == 0:
line += match.groups()[2]
line += match.groups()[3]
line += ", "
line += match.groups()[1]
line += "\n"
return line
for line in sys.stdin:
if line.find("getelementptr ") == line.find("getelementptr inbounds"):
if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("):
line = conv(re.match(ibrep, line), line)
elif line.find("getelementptr ") != line.find("getelementptr ("):
line = conv(re.match(normrep, line), line)
sys.stdout.write(line)
apply.sh:
for name in "$@"
do
python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name"
rm -f "$name.tmp"
done
The actual commands:
From llvm/src:
find test/ -name *.ll | xargs ./apply.sh
From llvm/src/tools/clang:
find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}"
From llvm/src/tools/polly:
find test/ -name *.ll | xargs ./apply.sh
After that, check-all (with llvm, clang, clang-tools-extra, lld,
compiler-rt, and polly all checked out).
The extra 'rm' in the apply.sh script is due to a few files in clang's test
suite using interesting unicode stuff that my python script was throwing
exceptions on. None of those files needed to be migrated, so it seemed
sufficient to ignore those cases.
Reviewers: rafael, dexonsmith, grosser
Differential Revision: http://reviews.llvm.org/D7636
llvm-svn: 230786
2015-02-27 20:29:02 +01:00
|
|
|
%next12 = getelementptr inbounds %struct._list, %struct._list* %tmp14, i64 0, i32 1
|
[RegAllocGreedy] Introduce a late pass to repair broken hints.
A broken hint is a copy where both ends are assigned different colors. When a
variable gets evicted in the neighborhood of such copies, it is likely we can
reconcile some of them.
** Context **
Copies are inserted during the register allocation via splitting. These split
points are required to relax the constraints on the allocation problem. When
such a point is inserted, both ends of the copy would not share the same color
with respect to the current allocation problem. When variables get evicted,
the allocation problem becomes different and some split point may not be
required anymore. However, the related variables may already have been colored.
This usually shows up in the assembly with pattern like this:
def A
...
save A to B
def A
use A
restore A from B
...
use B
Whereas we could simply have done:
def B
...
def A
use A
...
use B
** Proposed Solution **
A variable having a broken hint is marked for late recoloring if and only if
selecting a register for it evict another variable. Indeed, if no eviction
happens this is pointless to look for recoloring opportunities as it means the
situation was the same as the initial allocation problem where we had to break
the hint.
Finally, when everything has been allocated, we look for recoloring
opportunities for all the identified candidates.
The recoloring is performed very late to rely on accurate copy cost (all
involved variables are allocated).
The recoloring is simple unlike the last change recoloring. It propagates the
color of the broken hint to all its copy-related variables. If the color is
available for them, the recoloring uses it, otherwise it gives up on that hint
even if a more complex coloring would have worked.
The recoloring happens only if it is profitable. The profitability is evaluated
using the expected frequency of the copies of the currently recolored variable
with a) its current color and b) with the target color. If a) is greater or
equal than b), then it is profitable and the recoloring happen.
** Example **
Consider the following example:
BB1:
a =
b =
BB2:
...
= b
= a
Let us assume b gets split:
BB1:
a =
b =
BB2:
c = b
...
d = c
= d
= a
Because of how the allocation work, b, c, and d may be assigned different
colors. Now, if a gets evicted to make room for c, assuming b and d were
assigned to something different than a.
We end up with:
BB1:
a =
st a, SpillSlot
b =
BB2:
c = b
...
d = c
= d
e = ld SpillSlot
= e
This is likely that we can assign the same register for b, c, and d,
getting rid of 2 copies.
** Performances **
Both ARM64 and x86_64 show performance improvements of up to 3% for the
llvm-testsuite + externals with Os and O3. There are a few regressions too that
comes from the (in)accuracy of the block frequency estimate.
<rdar://problem/18312047>
llvm-svn: 225422
2015-01-08 02:16:39 +01:00
|
|
|
store %struct._list* null, %struct._list** %next12, align 8
|
2015-02-27 22:17:42 +01:00
|
|
|
%tmp15 = load %struct._list*, %struct._list** %next7, align 8
|
|
|
|
|
%tmp16 = load i32, i32* %value, align 4
|
[RegAllocGreedy] Introduce a late pass to repair broken hints.
A broken hint is a copy where both ends are assigned different colors. When a
variable gets evicted in the neighborhood of such copies, it is likely we can
reconcile some of them.
** Context **
Copies are inserted during the register allocation via splitting. These split
points are required to relax the constraints on the allocation problem. When
such a point is inserted, both ends of the copy would not share the same color
with respect to the current allocation problem. When variables get evicted,
the allocation problem becomes different and some split point may not be
required anymore. However, the related variables may already have been colored.
This usually shows up in the assembly with pattern like this:
def A
...
save A to B
def A
use A
restore A from B
...
use B
Whereas we could simply have done:
def B
...
def A
use A
...
use B
** Proposed Solution **
A variable having a broken hint is marked for late recoloring if and only if
selecting a register for it evict another variable. Indeed, if no eviction
happens this is pointless to look for recoloring opportunities as it means the
situation was the same as the initial allocation problem where we had to break
the hint.
Finally, when everything has been allocated, we look for recoloring
opportunities for all the identified candidates.
The recoloring is performed very late to rely on accurate copy cost (all
involved variables are allocated).
The recoloring is simple unlike the last change recoloring. It propagates the
color of the broken hint to all its copy-related variables. If the color is
available for them, the recoloring uses it, otherwise it gives up on that hint
even if a more complex coloring would have worked.
The recoloring happens only if it is profitable. The profitability is evaluated
using the expected frequency of the copies of the currently recolored variable
with a) its current color and b) with the target color. If a) is greater or
equal than b), then it is profitable and the recoloring happen.
** Example **
Consider the following example:
BB1:
a =
b =
BB2:
...
= b
= a
Let us assume b gets split:
BB1:
a =
b =
BB2:
c = b
...
d = c
= d
= a
Because of how the allocation work, b, c, and d may be assigned different
colors. Now, if a gets evicted to make room for c, assuming b and d were
assigned to something different than a.
We end up with:
BB1:
a =
st a, SpillSlot
b =
BB2:
c = b
...
d = c
= d
e = ld SpillSlot
= e
This is likely that we can assign the same register for b, c, and d,
getting rid of 2 copies.
** Performances **
Both ARM64 and x86_64 show performance improvements of up to 3% for the
llvm-testsuite + externals with Os and O3. There are a few regressions too that
comes from the (in)accuracy of the block frequency estimate.
<rdar://problem/18312047>
llvm-svn: 225422
2015-01-08 02:16:39 +01:00
|
|
|
%cmp14 = icmp eq i32 %tmp16, 1
|
|
|
|
|
%.tmp16 = select i1 %cmp14, i32 0, i32 %tmp16
|
2015-02-27 22:17:42 +01:00
|
|
|
%tmp18 = load i32, i32* %all, align 4
|
[RegAllocGreedy] Introduce a late pass to repair broken hints.
A broken hint is a copy where both ends are assigned different colors. When a
variable gets evicted in the neighborhood of such copies, it is likely we can
reconcile some of them.
** Context **
Copies are inserted during the register allocation via splitting. These split
points are required to relax the constraints on the allocation problem. When
such a point is inserted, both ends of the copy would not share the same color
with respect to the current allocation problem. When variables get evicted,
the allocation problem becomes different and some split point may not be
required anymore. However, the related variables may already have been colored.
This usually shows up in the assembly with pattern like this:
def A
...
save A to B
def A
use A
restore A from B
...
use B
Whereas we could simply have done:
def B
...
def A
use A
...
use B
** Proposed Solution **
A variable having a broken hint is marked for late recoloring if and only if
selecting a register for it evict another variable. Indeed, if no eviction
happens this is pointless to look for recoloring opportunities as it means the
situation was the same as the initial allocation problem where we had to break
the hint.
Finally, when everything has been allocated, we look for recoloring
opportunities for all the identified candidates.
The recoloring is performed very late to rely on accurate copy cost (all
involved variables are allocated).
The recoloring is simple unlike the last change recoloring. It propagates the
color of the broken hint to all its copy-related variables. If the color is
available for them, the recoloring uses it, otherwise it gives up on that hint
even if a more complex coloring would have worked.
The recoloring happens only if it is profitable. The profitability is evaluated
using the expected frequency of the copies of the currently recolored variable
with a) its current color and b) with the target color. If a) is greater or
equal than b), then it is profitable and the recoloring happen.
** Example **
Consider the following example:
BB1:
a =
b =
BB2:
...
= b
= a
Let us assume b gets split:
BB1:
a =
b =
BB2:
c = b
...
d = c
= d
= a
Because of how the allocation work, b, c, and d may be assigned different
colors. Now, if a gets evicted to make room for c, assuming b and d were
assigned to something different than a.
We end up with:
BB1:
a =
st a, SpillSlot
b =
BB2:
c = b
...
d = c
= d
e = ld SpillSlot
= e
This is likely that we can assign the same register for b, c, and d,
getting rid of 2 copies.
** Performances **
Both ARM64 and x86_64 show performance improvements of up to 3% for the
llvm-testsuite + externals with Os and O3. There are a few regressions too that
comes from the (in)accuracy of the block frequency estimate.
<rdar://problem/18312047>
llvm-svn: 225422
2015-01-08 02:16:39 +01:00
|
|
|
%tmp19 = or i32 %tmp18, %.tmp16
|
|
|
|
|
%tmp20 = icmp eq i32 %tmp19, 0
|
|
|
|
|
br i1 %tmp20, label %if.then19, label %if.end31
|
|
|
|
|
|
|
|
|
|
if.then19: ; preds = %if.then
|
|
|
|
|
%call21 = tail call i32 @in_wanted(i32* %call4)
|
|
|
|
|
br label %if.end31
|
|
|
|
|
|
|
|
|
|
if.else: ; preds = %equal_data.exit, %while.cond.i
|
|
|
|
|
%cmp26 = icmp eq i32 %col.071, 0
|
|
|
|
|
%.row.172 = select i1 %cmp26, i32 0, i32 %row.172
|
|
|
|
|
%sub30 = add nsw i32 %tmp5, -1
|
|
|
|
|
br label %if.end31
|
|
|
|
|
|
|
|
|
|
if.end31: ; preds = %if.else, %if.then19, %if.then
|
|
|
|
|
%col.1 = phi i32 [ %sub30, %if.else ], [ 0, %if.then ], [ 0, %if.then19 ]
|
|
|
|
|
%row.3 = phi i32 [ %.row.172, %if.else ], [ %row.172, %if.then ], [ 0, %if.then19 ]
|
|
|
|
|
%current.2 = phi %struct._list* [ %current.173, %if.else ], [ %tmp15, %if.then ], [ %tmp15, %if.then19 ]
|
|
|
|
|
%inc = add nsw i32 %col.1, 1
|
2015-02-27 22:17:42 +01:00
|
|
|
%tmp25 = load i32, i32* @ncol, align 4
|
[RegAllocGreedy] Introduce a late pass to repair broken hints.
A broken hint is a copy where both ends are assigned different colors. When a
variable gets evicted in the neighborhood of such copies, it is likely we can
reconcile some of them.
** Context **
Copies are inserted during the register allocation via splitting. These split
points are required to relax the constraints on the allocation problem. When
such a point is inserted, both ends of the copy would not share the same color
with respect to the current allocation problem. When variables get evicted,
the allocation problem becomes different and some split point may not be
required anymore. However, the related variables may already have been colored.
This usually shows up in the assembly with pattern like this:
def A
...
save A to B
def A
use A
restore A from B
...
use B
Whereas we could simply have done:
def B
...
def A
use A
...
use B
** Proposed Solution **
A variable having a broken hint is marked for late recoloring if and only if
selecting a register for it evict another variable. Indeed, if no eviction
happens this is pointless to look for recoloring opportunities as it means the
situation was the same as the initial allocation problem where we had to break
the hint.
Finally, when everything has been allocated, we look for recoloring
opportunities for all the identified candidates.
The recoloring is performed very late to rely on accurate copy cost (all
involved variables are allocated).
The recoloring is simple unlike the last change recoloring. It propagates the
color of the broken hint to all its copy-related variables. If the color is
available for them, the recoloring uses it, otherwise it gives up on that hint
even if a more complex coloring would have worked.
The recoloring happens only if it is profitable. The profitability is evaluated
using the expected frequency of the copies of the currently recolored variable
with a) its current color and b) with the target color. If a) is greater or
equal than b), then it is profitable and the recoloring happen.
** Example **
Consider the following example:
BB1:
a =
b =
BB2:
...
= b
= a
Let us assume b gets split:
BB1:
a =
b =
BB2:
c = b
...
d = c
= d
= a
Because of how the allocation work, b, c, and d may be assigned different
colors. Now, if a gets evicted to make room for c, assuming b and d were
assigned to something different than a.
We end up with:
BB1:
a =
st a, SpillSlot
b =
BB2:
c = b
...
d = c
= d
e = ld SpillSlot
= e
This is likely that we can assign the same register for b, c, and d,
getting rid of 2 copies.
** Performances **
Both ARM64 and x86_64 show performance improvements of up to 3% for the
llvm-testsuite + externals with Os and O3. There are a few regressions too that
comes from the (in)accuracy of the block frequency estimate.
<rdar://problem/18312047>
llvm-svn: 225422
2015-01-08 02:16:39 +01:00
|
|
|
%cmp2 = icmp eq i32 %inc, %tmp25
|
|
|
|
|
br i1 %cmp2, label %for.cond1.for.inc32_crit_edge, label %for.body3
|
|
|
|
|
|
|
|
|
|
for.cond1.for.inc32_crit_edge: ; preds = %if.end31
|
2015-02-27 22:17:42 +01:00
|
|
|
%.pre79 = load i32, i32* @nrow, align 4
|
[RegAllocGreedy] Introduce a late pass to repair broken hints.
A broken hint is a copy where both ends are assigned different colors. When a
variable gets evicted in the neighborhood of such copies, it is likely we can
reconcile some of them.
** Context **
Copies are inserted during the register allocation via splitting. These split
points are required to relax the constraints on the allocation problem. When
such a point is inserted, both ends of the copy would not share the same color
with respect to the current allocation problem. When variables get evicted,
the allocation problem becomes different and some split point may not be
required anymore. However, the related variables may already have been colored.
This usually shows up in the assembly with pattern like this:
def A
...
save A to B
def A
use A
restore A from B
...
use B
Whereas we could simply have done:
def B
...
def A
use A
...
use B
** Proposed Solution **
A variable having a broken hint is marked for late recoloring if and only if
selecting a register for it evict another variable. Indeed, if no eviction
happens this is pointless to look for recoloring opportunities as it means the
situation was the same as the initial allocation problem where we had to break
the hint.
Finally, when everything has been allocated, we look for recoloring
opportunities for all the identified candidates.
The recoloring is performed very late to rely on accurate copy cost (all
involved variables are allocated).
The recoloring is simple unlike the last change recoloring. It propagates the
color of the broken hint to all its copy-related variables. If the color is
available for them, the recoloring uses it, otherwise it gives up on that hint
even if a more complex coloring would have worked.
The recoloring happens only if it is profitable. The profitability is evaluated
using the expected frequency of the copies of the currently recolored variable
with a) its current color and b) with the target color. If a) is greater or
equal than b), then it is profitable and the recoloring happen.
** Example **
Consider the following example:
BB1:
a =
b =
BB2:
...
= b
= a
Let us assume b gets split:
BB1:
a =
b =
BB2:
c = b
...
d = c
= d
= a
Because of how the allocation work, b, c, and d may be assigned different
colors. Now, if a gets evicted to make room for c, assuming b and d were
assigned to something different than a.
We end up with:
BB1:
a =
st a, SpillSlot
b =
BB2:
c = b
...
d = c
= d
e = ld SpillSlot
= e
This is likely that we can assign the same register for b, c, and d,
getting rid of 2 copies.
** Performances **
Both ARM64 and x86_64 show performance improvements of up to 3% for the
llvm-testsuite + externals with Os and O3. There are a few regressions too that
comes from the (in)accuracy of the block frequency estimate.
<rdar://problem/18312047>
llvm-svn: 225422
2015-01-08 02:16:39 +01:00
|
|
|
br label %for.inc32
|
|
|
|
|
|
|
|
|
|
for.inc32: ; preds = %for.cond1.for.inc32_crit_edge, %for.cond1.preheader
|
|
|
|
|
%tmp26 = phi i32 [ %.pre79, %for.cond1.for.inc32_crit_edge ], [ 0, %for.cond1.preheader ]
|
|
|
|
|
%current.1.lcssa = phi %struct._list* [ %current.2, %for.cond1.for.inc32_crit_edge ], [ %current.077, %for.cond1.preheader ]
|
|
|
|
|
%row.1.lcssa = phi i32 [ %row.3, %for.cond1.for.inc32_crit_edge ], [ 0, %for.cond1.preheader ]
|
|
|
|
|
%inc33 = add nsw i32 %row.1.lcssa, 1
|
|
|
|
|
%cmp = icmp eq i32 %inc33, %tmp26
|
|
|
|
|
br i1 %cmp, label %for.end34, label %for.cond1.preheader
|
|
|
|
|
|
|
|
|
|
for.end34: ; preds = %for.inc32
|
2015-02-27 22:17:42 +01:00
|
|
|
%.pre = load %struct._list*, %struct._list** %tmp, align 8
|
[RegAllocGreedy] Introduce a late pass to repair broken hints.
A broken hint is a copy where both ends are assigned different colors. When a
variable gets evicted in the neighborhood of such copies, it is likely we can
reconcile some of them.
** Context **
Copies are inserted during the register allocation via splitting. These split
points are required to relax the constraints on the allocation problem. When
such a point is inserted, both ends of the copy would not share the same color
with respect to the current allocation problem. When variables get evicted,
the allocation problem becomes different and some split point may not be
required anymore. However, the related variables may already have been colored.
This usually shows up in the assembly with pattern like this:
def A
...
save A to B
def A
use A
restore A from B
...
use B
Whereas we could simply have done:
def B
...
def A
use A
...
use B
** Proposed Solution **
A variable having a broken hint is marked for late recoloring if and only if
selecting a register for it evict another variable. Indeed, if no eviction
happens this is pointless to look for recoloring opportunities as it means the
situation was the same as the initial allocation problem where we had to break
the hint.
Finally, when everything has been allocated, we look for recoloring
opportunities for all the identified candidates.
The recoloring is performed very late to rely on accurate copy cost (all
involved variables are allocated).
The recoloring is simple unlike the last change recoloring. It propagates the
color of the broken hint to all its copy-related variables. If the color is
available for them, the recoloring uses it, otherwise it gives up on that hint
even if a more complex coloring would have worked.
The recoloring happens only if it is profitable. The profitability is evaluated
using the expected frequency of the copies of the currently recolored variable
with a) its current color and b) with the target color. If a) is greater or
equal than b), then it is profitable and the recoloring happen.
** Example **
Consider the following example:
BB1:
a =
b =
BB2:
...
= b
= a
Let us assume b gets split:
BB1:
a =
b =
BB2:
c = b
...
d = c
= d
= a
Because of how the allocation work, b, c, and d may be assigned different
colors. Now, if a gets evicted to make room for c, assuming b and d were
assigned to something different than a.
We end up with:
BB1:
a =
st a, SpillSlot
b =
BB2:
c = b
...
d = c
= d
e = ld SpillSlot
= e
This is likely that we can assign the same register for b, c, and d,
getting rid of 2 copies.
** Performances **
Both ARM64 and x86_64 show performance improvements of up to 3% for the
llvm-testsuite + externals with Os and O3. There are a few regressions too that
comes from the (in)accuracy of the block frequency estimate.
<rdar://problem/18312047>
llvm-svn: 225422
2015-01-08 02:16:39 +01:00
|
|
|
ret %struct._list* %.pre
|
|
|
|
|
}
|