[BPF] Support for compile once and run everywhere
Introduction
============
This patch added intial support for bpf program compile once
and run everywhere (CO-RE).
The main motivation is for bpf program which depends on
kernel headers which may vary between different kernel versions.
The initial discussion can be found at https://lwn.net/Articles/773198/.
Currently, bpf program accesses kernel internal data structure
through bpf_probe_read() helper. The idea is to capture the
kernel data structure to be accessed through bpf_probe_read()
and relocate them on different kernel versions.
On each host, right before bpf program load, the bpfloader
will look at the types of the native linux through vmlinux BTF,
calculates proper access offset and patch the instruction.
To accommodate this, three intrinsic functions
preserve_{array,union,struct}_access_index
are introduced which in clang will preserve the base pointer,
struct/union/array access_index and struct/union debuginfo type
information. Later, bpf IR pass can reconstruct the whole gep
access chains without looking at gep itself.
This patch did the following:
. An IR pass is added to convert preserve_*_access_index to
global variable who name encodes the getelementptr
access pattern. The global variable has metadata
attached to describe the corresponding struct/union
debuginfo type.
. An SimplifyPatchable MachineInstruction pass is added
to remove unnecessary loads.
. The BTF output pass is enhanced to generate relocation
records located in .BTF.ext section.
Typical CO-RE also needs support of global variables which can
be assigned to different values to different hosts. For example,
kernel version can be used to guard different versions of codes.
This patch added the support for patchable externals as well.
Example
=======
The following is an example.
struct pt_regs {
long arg1;
long arg2;
};
struct sk_buff {
int i;
struct net_device *dev;
};
#define _(x) (__builtin_preserve_access_index(x))
static int (*bpf_probe_read)(void *dst, int size, const void *unsafe_ptr) =
(void *) 4;
extern __attribute__((section(".BPF.patchable_externs"))) unsigned __kernel_version;
int bpf_prog(struct pt_regs *ctx) {
struct net_device *dev = 0;
// ctx->arg* does not need bpf_probe_read
if (__kernel_version >= 41608)
bpf_probe_read(&dev, sizeof(dev), _(&((struct sk_buff *)ctx->arg1)->dev));
else
bpf_probe_read(&dev, sizeof(dev), _(&((struct sk_buff *)ctx->arg2)->dev));
return dev != 0;
}
In the above, we want to translate the third argument of
bpf_probe_read() as relocations.
-bash-4.4$ clang -target bpf -O2 -g -S trace.c
The compiler will generate two new subsections in .BTF.ext,
OffsetReloc and ExternReloc.
OffsetReloc is to record the structure member offset operations,
and ExternalReloc is to record the external globals where
only u8, u16, u32 and u64 are supported.
BPFOffsetReloc Size
struct SecLOffsetReloc for ELF section #1
A number of struct BPFOffsetReloc for ELF section #1
struct SecOffsetReloc for ELF section #2
A number of struct BPFOffsetReloc for ELF section #2
...
BPFExternReloc Size
struct SecExternReloc for ELF section #1
A number of struct BPFExternReloc for ELF section #1
struct SecExternReloc for ELF section #2
A number of struct BPFExternReloc for ELF section #2
struct BPFOffsetReloc {
uint32_t InsnOffset; ///< Byte offset in this section
uint32_t TypeID; ///< TypeID for the relocation
uint32_t OffsetNameOff; ///< The string to traverse types
};
struct BPFExternReloc {
uint32_t InsnOffset; ///< Byte offset in this section
uint32_t ExternNameOff; ///< The string for external variable
};
Note that only externs with attribute section ".BPF.patchable_externs"
are considered for Extern Reloc which will be patched by bpf loader
right before the load.
For the above test case, two offset records and one extern record
will be generated:
OffsetReloc records:
.long .Ltmp12 # Insn Offset
.long 7 # TypeId
.long 242 # Type Decode String
.long .Ltmp18 # Insn Offset
.long 7 # TypeId
.long 242 # Type Decode String
ExternReloc record:
.long .Ltmp5 # Insn Offset
.long 165 # External Variable
In string table:
.ascii "0:1" # string offset=242
.ascii "__kernel_version" # string offset=165
The default member offset can be calculated as
the 2nd member offset (0 representing the 1st member) of struct "sk_buff".
The asm code:
.Ltmp5:
.Ltmp6:
r2 = 0
r3 = 41608
.Ltmp7:
.Ltmp8:
.loc 1 18 9 is_stmt 0 # t.c:18:9
.Ltmp9:
if r3 > r2 goto LBB0_2
.Ltmp10:
.Ltmp11:
.loc 1 0 9 # t.c:0:9
.Ltmp12:
r2 = 8
.Ltmp13:
.loc 1 19 66 is_stmt 1 # t.c:19:66
.Ltmp14:
.Ltmp15:
r3 = *(u64 *)(r1 + 0)
goto LBB0_3
.Ltmp16:
.Ltmp17:
LBB0_2:
.loc 1 0 66 is_stmt 0 # t.c:0:66
.Ltmp18:
r2 = 8
.loc 1 21 66 is_stmt 1 # t.c:21:66
.Ltmp19:
r3 = *(u64 *)(r1 + 8)
.Ltmp20:
.Ltmp21:
LBB0_3:
.loc 1 0 66 is_stmt 0 # t.c:0:66
r3 += r2
r1 = r10
.Ltmp22:
.Ltmp23:
.Ltmp24:
r1 += -8
r2 = 8
call 4
For instruction .Ltmp12 and .Ltmp18, "r2 = 8", the number
8 is the structure offset based on the current BTF.
Loader needs to adjust it if it changes on the host.
For instruction .Ltmp5, "r2 = 0", the external variable
got a default value 0, loader needs to supply an appropriate
value for the particular host.
Compiling to generate object code and disassemble:
0000000000000000 bpf_prog:
0: b7 02 00 00 00 00 00 00 r2 = 0
1: 7b 2a f8 ff 00 00 00 00 *(u64 *)(r10 - 8) = r2
2: b7 02 00 00 00 00 00 00 r2 = 0
3: b7 03 00 00 88 a2 00 00 r3 = 41608
4: 2d 23 03 00 00 00 00 00 if r3 > r2 goto +3 <LBB0_2>
5: b7 02 00 00 08 00 00 00 r2 = 8
6: 79 13 00 00 00 00 00 00 r3 = *(u64 *)(r1 + 0)
7: 05 00 02 00 00 00 00 00 goto +2 <LBB0_3>
0000000000000040 LBB0_2:
8: b7 02 00 00 08 00 00 00 r2 = 8
9: 79 13 08 00 00 00 00 00 r3 = *(u64 *)(r1 + 8)
0000000000000050 LBB0_3:
10: 0f 23 00 00 00 00 00 00 r3 += r2
11: bf a1 00 00 00 00 00 00 r1 = r10
12: 07 01 00 00 f8 ff ff ff r1 += -8
13: b7 02 00 00 08 00 00 00 r2 = 8
14: 85 00 00 00 04 00 00 00 call 4
Instructions #2, #5 and #8 need relocation resoutions from the loader.
Signed-off-by: Yonghong Song <yhs@fb.com>
Differential Revision: https://reviews.llvm.org/D61524
llvm-svn: 365503
2019-07-09 17:28:41 +02:00
|
|
|
//===- BPFCORE.h - Common info for Compile-Once Run-EveryWhere -*- C++ -*-===//
|
|
|
|
//
|
|
|
|
// Part of the LLVM Project, under the Apache License v2.0 with LLVM Exceptions.
|
|
|
|
// See https://llvm.org/LICENSE.txt for license information.
|
|
|
|
// SPDX-License-Identifier: Apache-2.0 WITH LLVM-exception
|
|
|
|
//
|
|
|
|
//===----------------------------------------------------------------------===//
|
|
|
|
|
|
|
|
#ifndef LLVM_LIB_TARGET_BPF_BPFCORE_H
|
|
|
|
#define LLVM_LIB_TARGET_BPF_BPFCORE_H
|
|
|
|
|
2020-06-17 14:27:36 +02:00
|
|
|
#include "llvm/ADT/StringRef.h"
|
|
|
|
|
[BPF] Support for compile once and run everywhere
Introduction
============
This patch added intial support for bpf program compile once
and run everywhere (CO-RE).
The main motivation is for bpf program which depends on
kernel headers which may vary between different kernel versions.
The initial discussion can be found at https://lwn.net/Articles/773198/.
Currently, bpf program accesses kernel internal data structure
through bpf_probe_read() helper. The idea is to capture the
kernel data structure to be accessed through bpf_probe_read()
and relocate them on different kernel versions.
On each host, right before bpf program load, the bpfloader
will look at the types of the native linux through vmlinux BTF,
calculates proper access offset and patch the instruction.
To accommodate this, three intrinsic functions
preserve_{array,union,struct}_access_index
are introduced which in clang will preserve the base pointer,
struct/union/array access_index and struct/union debuginfo type
information. Later, bpf IR pass can reconstruct the whole gep
access chains without looking at gep itself.
This patch did the following:
. An IR pass is added to convert preserve_*_access_index to
global variable who name encodes the getelementptr
access pattern. The global variable has metadata
attached to describe the corresponding struct/union
debuginfo type.
. An SimplifyPatchable MachineInstruction pass is added
to remove unnecessary loads.
. The BTF output pass is enhanced to generate relocation
records located in .BTF.ext section.
Typical CO-RE also needs support of global variables which can
be assigned to different values to different hosts. For example,
kernel version can be used to guard different versions of codes.
This patch added the support for patchable externals as well.
Example
=======
The following is an example.
struct pt_regs {
long arg1;
long arg2;
};
struct sk_buff {
int i;
struct net_device *dev;
};
#define _(x) (__builtin_preserve_access_index(x))
static int (*bpf_probe_read)(void *dst, int size, const void *unsafe_ptr) =
(void *) 4;
extern __attribute__((section(".BPF.patchable_externs"))) unsigned __kernel_version;
int bpf_prog(struct pt_regs *ctx) {
struct net_device *dev = 0;
// ctx->arg* does not need bpf_probe_read
if (__kernel_version >= 41608)
bpf_probe_read(&dev, sizeof(dev), _(&((struct sk_buff *)ctx->arg1)->dev));
else
bpf_probe_read(&dev, sizeof(dev), _(&((struct sk_buff *)ctx->arg2)->dev));
return dev != 0;
}
In the above, we want to translate the third argument of
bpf_probe_read() as relocations.
-bash-4.4$ clang -target bpf -O2 -g -S trace.c
The compiler will generate two new subsections in .BTF.ext,
OffsetReloc and ExternReloc.
OffsetReloc is to record the structure member offset operations,
and ExternalReloc is to record the external globals where
only u8, u16, u32 and u64 are supported.
BPFOffsetReloc Size
struct SecLOffsetReloc for ELF section #1
A number of struct BPFOffsetReloc for ELF section #1
struct SecOffsetReloc for ELF section #2
A number of struct BPFOffsetReloc for ELF section #2
...
BPFExternReloc Size
struct SecExternReloc for ELF section #1
A number of struct BPFExternReloc for ELF section #1
struct SecExternReloc for ELF section #2
A number of struct BPFExternReloc for ELF section #2
struct BPFOffsetReloc {
uint32_t InsnOffset; ///< Byte offset in this section
uint32_t TypeID; ///< TypeID for the relocation
uint32_t OffsetNameOff; ///< The string to traverse types
};
struct BPFExternReloc {
uint32_t InsnOffset; ///< Byte offset in this section
uint32_t ExternNameOff; ///< The string for external variable
};
Note that only externs with attribute section ".BPF.patchable_externs"
are considered for Extern Reloc which will be patched by bpf loader
right before the load.
For the above test case, two offset records and one extern record
will be generated:
OffsetReloc records:
.long .Ltmp12 # Insn Offset
.long 7 # TypeId
.long 242 # Type Decode String
.long .Ltmp18 # Insn Offset
.long 7 # TypeId
.long 242 # Type Decode String
ExternReloc record:
.long .Ltmp5 # Insn Offset
.long 165 # External Variable
In string table:
.ascii "0:1" # string offset=242
.ascii "__kernel_version" # string offset=165
The default member offset can be calculated as
the 2nd member offset (0 representing the 1st member) of struct "sk_buff".
The asm code:
.Ltmp5:
.Ltmp6:
r2 = 0
r3 = 41608
.Ltmp7:
.Ltmp8:
.loc 1 18 9 is_stmt 0 # t.c:18:9
.Ltmp9:
if r3 > r2 goto LBB0_2
.Ltmp10:
.Ltmp11:
.loc 1 0 9 # t.c:0:9
.Ltmp12:
r2 = 8
.Ltmp13:
.loc 1 19 66 is_stmt 1 # t.c:19:66
.Ltmp14:
.Ltmp15:
r3 = *(u64 *)(r1 + 0)
goto LBB0_3
.Ltmp16:
.Ltmp17:
LBB0_2:
.loc 1 0 66 is_stmt 0 # t.c:0:66
.Ltmp18:
r2 = 8
.loc 1 21 66 is_stmt 1 # t.c:21:66
.Ltmp19:
r3 = *(u64 *)(r1 + 8)
.Ltmp20:
.Ltmp21:
LBB0_3:
.loc 1 0 66 is_stmt 0 # t.c:0:66
r3 += r2
r1 = r10
.Ltmp22:
.Ltmp23:
.Ltmp24:
r1 += -8
r2 = 8
call 4
For instruction .Ltmp12 and .Ltmp18, "r2 = 8", the number
8 is the structure offset based on the current BTF.
Loader needs to adjust it if it changes on the host.
For instruction .Ltmp5, "r2 = 0", the external variable
got a default value 0, loader needs to supply an appropriate
value for the particular host.
Compiling to generate object code and disassemble:
0000000000000000 bpf_prog:
0: b7 02 00 00 00 00 00 00 r2 = 0
1: 7b 2a f8 ff 00 00 00 00 *(u64 *)(r10 - 8) = r2
2: b7 02 00 00 00 00 00 00 r2 = 0
3: b7 03 00 00 88 a2 00 00 r3 = 41608
4: 2d 23 03 00 00 00 00 00 if r3 > r2 goto +3 <LBB0_2>
5: b7 02 00 00 08 00 00 00 r2 = 8
6: 79 13 00 00 00 00 00 00 r3 = *(u64 *)(r1 + 0)
7: 05 00 02 00 00 00 00 00 goto +2 <LBB0_3>
0000000000000040 LBB0_2:
8: b7 02 00 00 08 00 00 00 r2 = 8
9: 79 13 08 00 00 00 00 00 r3 = *(u64 *)(r1 + 8)
0000000000000050 LBB0_3:
10: 0f 23 00 00 00 00 00 00 r3 += r2
11: bf a1 00 00 00 00 00 00 r1 = r10
12: 07 01 00 00 f8 ff ff ff r1 += -8
13: b7 02 00 00 08 00 00 00 r2 = 8
14: 85 00 00 00 04 00 00 00 call 4
Instructions #2, #5 and #8 need relocation resoutions from the loader.
Signed-off-by: Yonghong Song <yhs@fb.com>
Differential Revision: https://reviews.llvm.org/D61524
llvm-svn: 365503
2019-07-09 17:28:41 +02:00
|
|
|
namespace llvm {
|
|
|
|
|
BPF: move AbstractMemberAccess and PreserveDIType passes to EP_EarlyAsPossible
Move abstractMemberAccess and PreserveDIType passes as early as
possible, right after clang code generation.
Currently, compiler may transform the above code
p1 = llvm.bpf.builtin.preserve.struct.access(base, 0, 0);
p2 = llvm.bpf.builtin.preserve.struct.access(p1, 1, 2);
a = llvm.bpf.builtin.preserve_field_info(p2, EXIST);
if (a) {
p1 = llvm.bpf.builtin.preserve.struct.access(base, 0, 0);
p2 = llvm.bpf.builtin.preserve.struct.access(p1, 1, 2);
bpf_probe_read(buf, buf_size, p2);
}
to
p1 = llvm.bpf.builtin.preserve.struct.access(base, 0, 0);
p2 = llvm.bpf.builtin.preserve.struct.access(p1, 1, 2);
a = llvm.bpf.builtin.preserve_field_info(p2, EXIST);
if (a) {
bpf_probe_read(buf, buf_size, p2);
}
and eventually assembly code looks like
reloc_exist = 1;
reloc_member_offset = 10; //calculate member offset from base
p2 = base + reloc_member_offset;
if (reloc_exist) {
bpf_probe_read(bpf, buf_size, p2);
}
if during libbpf relocation resolution, reloc_exist is actually
resolved to 0 (not exist), reloc_member_offset relocation cannot
be resolved and will be patched with illegal instruction.
This will cause verifier failure.
This patch attempts to address this issue by do chaining
analysis and replace chains with special globals right
after clang code gen. This will remove the cse possibility
described in the above. The IR typically looks like
%6 = load @llvm.sk_buff:0:50$0:0:0:2:0
%7 = bitcast %struct.sk_buff* %2 to i8*
%8 = getelementptr i8, i8* %7, %6
for a particular address computation relocation.
But this transformation has another consequence, code sinking
may happen like below:
PHI = <possibly different @preserve_*_access_globals>
%7 = bitcast %struct.sk_buff* %2 to i8*
%8 = getelementptr i8, i8* %7, %6
For such cases, we will not able to generate relocations since
multiple relocations are merged into one.
This patch introduced a passthrough builtin
to prevent such optimization. Looks like inline assembly has more
impact for optimizaiton, e.g., inlining. Using passthrough has
less impact on optimizations.
A new IR pass is introduced at the beginning of target-dependent
IR optimization, which does:
- report fatal error if any reloc global in PHI nodes
- remove all bpf passthrough builtin functions
Changes for existing CORE tests:
- for clang tests, add "-Xclang -disable-llvm-passes" flags to
avoid builtin->reloc_global transformation so the test is still
able to check correctness for clang generated IR.
- for llvm CodeGen/BPF tests, add "opt -O2 <ir_file> | llvm-dis" command
before "llc" command since "opt" is needed to call newly-placed
builtin->reloc_global transformation. Add target triple in the IR
file since "opt" requires it.
- Since target triple is added in IR file, if a test may produce
different results for different endianness, two tests will be
created, one for bpfeb and another for bpfel, e.g., some tests
for relocation of lshift/rshift of bitfields.
- field-reloc-bitfield-1.ll has different relocations compared to
old codes. This is because for the structure in the test,
new code returns struct layout alignment 4 while old code
is 8. Align 8 is more precise and permits double load. With align 4,
the new mechanism uses 4-byte load, so generating different
relocations.
- test intrinsic-transforms.ll is removed. This is used to test
cse on intrinsics so we do not lose metadata. Now metadata is attached
to global and not instruction, it won't get lost with cse.
Differential Revision: https://reviews.llvm.org/D87153
2020-09-03 07:56:41 +02:00
|
|
|
class BasicBlock;
|
|
|
|
class Instruction;
|
|
|
|
class Module;
|
|
|
|
|
[BPF] Support for compile once and run everywhere
Introduction
============
This patch added intial support for bpf program compile once
and run everywhere (CO-RE).
The main motivation is for bpf program which depends on
kernel headers which may vary between different kernel versions.
The initial discussion can be found at https://lwn.net/Articles/773198/.
Currently, bpf program accesses kernel internal data structure
through bpf_probe_read() helper. The idea is to capture the
kernel data structure to be accessed through bpf_probe_read()
and relocate them on different kernel versions.
On each host, right before bpf program load, the bpfloader
will look at the types of the native linux through vmlinux BTF,
calculates proper access offset and patch the instruction.
To accommodate this, three intrinsic functions
preserve_{array,union,struct}_access_index
are introduced which in clang will preserve the base pointer,
struct/union/array access_index and struct/union debuginfo type
information. Later, bpf IR pass can reconstruct the whole gep
access chains without looking at gep itself.
This patch did the following:
. An IR pass is added to convert preserve_*_access_index to
global variable who name encodes the getelementptr
access pattern. The global variable has metadata
attached to describe the corresponding struct/union
debuginfo type.
. An SimplifyPatchable MachineInstruction pass is added
to remove unnecessary loads.
. The BTF output pass is enhanced to generate relocation
records located in .BTF.ext section.
Typical CO-RE also needs support of global variables which can
be assigned to different values to different hosts. For example,
kernel version can be used to guard different versions of codes.
This patch added the support for patchable externals as well.
Example
=======
The following is an example.
struct pt_regs {
long arg1;
long arg2;
};
struct sk_buff {
int i;
struct net_device *dev;
};
#define _(x) (__builtin_preserve_access_index(x))
static int (*bpf_probe_read)(void *dst, int size, const void *unsafe_ptr) =
(void *) 4;
extern __attribute__((section(".BPF.patchable_externs"))) unsigned __kernel_version;
int bpf_prog(struct pt_regs *ctx) {
struct net_device *dev = 0;
// ctx->arg* does not need bpf_probe_read
if (__kernel_version >= 41608)
bpf_probe_read(&dev, sizeof(dev), _(&((struct sk_buff *)ctx->arg1)->dev));
else
bpf_probe_read(&dev, sizeof(dev), _(&((struct sk_buff *)ctx->arg2)->dev));
return dev != 0;
}
In the above, we want to translate the third argument of
bpf_probe_read() as relocations.
-bash-4.4$ clang -target bpf -O2 -g -S trace.c
The compiler will generate two new subsections in .BTF.ext,
OffsetReloc and ExternReloc.
OffsetReloc is to record the structure member offset operations,
and ExternalReloc is to record the external globals where
only u8, u16, u32 and u64 are supported.
BPFOffsetReloc Size
struct SecLOffsetReloc for ELF section #1
A number of struct BPFOffsetReloc for ELF section #1
struct SecOffsetReloc for ELF section #2
A number of struct BPFOffsetReloc for ELF section #2
...
BPFExternReloc Size
struct SecExternReloc for ELF section #1
A number of struct BPFExternReloc for ELF section #1
struct SecExternReloc for ELF section #2
A number of struct BPFExternReloc for ELF section #2
struct BPFOffsetReloc {
uint32_t InsnOffset; ///< Byte offset in this section
uint32_t TypeID; ///< TypeID for the relocation
uint32_t OffsetNameOff; ///< The string to traverse types
};
struct BPFExternReloc {
uint32_t InsnOffset; ///< Byte offset in this section
uint32_t ExternNameOff; ///< The string for external variable
};
Note that only externs with attribute section ".BPF.patchable_externs"
are considered for Extern Reloc which will be patched by bpf loader
right before the load.
For the above test case, two offset records and one extern record
will be generated:
OffsetReloc records:
.long .Ltmp12 # Insn Offset
.long 7 # TypeId
.long 242 # Type Decode String
.long .Ltmp18 # Insn Offset
.long 7 # TypeId
.long 242 # Type Decode String
ExternReloc record:
.long .Ltmp5 # Insn Offset
.long 165 # External Variable
In string table:
.ascii "0:1" # string offset=242
.ascii "__kernel_version" # string offset=165
The default member offset can be calculated as
the 2nd member offset (0 representing the 1st member) of struct "sk_buff".
The asm code:
.Ltmp5:
.Ltmp6:
r2 = 0
r3 = 41608
.Ltmp7:
.Ltmp8:
.loc 1 18 9 is_stmt 0 # t.c:18:9
.Ltmp9:
if r3 > r2 goto LBB0_2
.Ltmp10:
.Ltmp11:
.loc 1 0 9 # t.c:0:9
.Ltmp12:
r2 = 8
.Ltmp13:
.loc 1 19 66 is_stmt 1 # t.c:19:66
.Ltmp14:
.Ltmp15:
r3 = *(u64 *)(r1 + 0)
goto LBB0_3
.Ltmp16:
.Ltmp17:
LBB0_2:
.loc 1 0 66 is_stmt 0 # t.c:0:66
.Ltmp18:
r2 = 8
.loc 1 21 66 is_stmt 1 # t.c:21:66
.Ltmp19:
r3 = *(u64 *)(r1 + 8)
.Ltmp20:
.Ltmp21:
LBB0_3:
.loc 1 0 66 is_stmt 0 # t.c:0:66
r3 += r2
r1 = r10
.Ltmp22:
.Ltmp23:
.Ltmp24:
r1 += -8
r2 = 8
call 4
For instruction .Ltmp12 and .Ltmp18, "r2 = 8", the number
8 is the structure offset based on the current BTF.
Loader needs to adjust it if it changes on the host.
For instruction .Ltmp5, "r2 = 0", the external variable
got a default value 0, loader needs to supply an appropriate
value for the particular host.
Compiling to generate object code and disassemble:
0000000000000000 bpf_prog:
0: b7 02 00 00 00 00 00 00 r2 = 0
1: 7b 2a f8 ff 00 00 00 00 *(u64 *)(r10 - 8) = r2
2: b7 02 00 00 00 00 00 00 r2 = 0
3: b7 03 00 00 88 a2 00 00 r3 = 41608
4: 2d 23 03 00 00 00 00 00 if r3 > r2 goto +3 <LBB0_2>
5: b7 02 00 00 08 00 00 00 r2 = 8
6: 79 13 00 00 00 00 00 00 r3 = *(u64 *)(r1 + 0)
7: 05 00 02 00 00 00 00 00 goto +2 <LBB0_3>
0000000000000040 LBB0_2:
8: b7 02 00 00 08 00 00 00 r2 = 8
9: 79 13 08 00 00 00 00 00 r3 = *(u64 *)(r1 + 8)
0000000000000050 LBB0_3:
10: 0f 23 00 00 00 00 00 00 r3 += r2
11: bf a1 00 00 00 00 00 00 r1 = r10
12: 07 01 00 00 f8 ff ff ff r1 += -8
13: b7 02 00 00 08 00 00 00 r2 = 8
14: 85 00 00 00 04 00 00 00 call 4
Instructions #2, #5 and #8 need relocation resoutions from the loader.
Signed-off-by: Yonghong Song <yhs@fb.com>
Differential Revision: https://reviews.llvm.org/D61524
llvm-svn: 365503
2019-07-09 17:28:41 +02:00
|
|
|
class BPFCoreSharedInfo {
|
|
|
|
public:
|
[BPF] preserve debuginfo types for builtin __builtin__btf_type_id()
The builtin function
u32 btf_type_id = __builtin_btf_type_id(param, 0)
can help preserve type info for the following use case:
extern void foo(..., void *data, int size);
int test(...) {
struct t { int a; int b; int c; } d;
d.a = ...; d.b = ...; d.c = ...;
foo(..., &d, sizeof(d));
}
The function "foo" in the above only see raw data and does not
know what type of the data is. In certain cases, e.g., logging,
the additional type information will help pretty print.
This patch handles the builtin in BPF backend. It includes
an IR pass to translate the IR intrinsic to a load of
a global variable which carries the metadata, and an MI
pass to remove the intermediate load of the global variable.
Finally, in AsmPrinter pass, proper instruction are generated.
In the above example, the second argument for __builtin_btf_type_id()
is 0, which means a relocation for local adjustment,
i.e., w.r.t. bpf program BTF change, will be generated.
The value 1 for the second argument means
a relocation for remote adjustment, e.g., against vmlinux.
Differential Revision: https://reviews.llvm.org/D74572
2020-02-12 01:55:22 +01:00
|
|
|
enum PatchableRelocKind : uint32_t {
|
[BPF] do compile-once run-everywhere relocation for bitfields
A bpf specific clang intrinsic is introduced:
u32 __builtin_preserve_field_info(member_access, info_kind)
Depending on info_kind, different information will
be returned to the program. A relocation is also
recorded for this builtin so that bpf loader can
patch the instruction on the target host.
This clang intrinsic is used to get certain information
to facilitate struct/union member relocations.
The offset relocation is extended by 4 bytes to
include relocation kind.
Currently supported relocation kinds are
enum {
FIELD_BYTE_OFFSET = 0,
FIELD_BYTE_SIZE,
FIELD_EXISTENCE,
FIELD_SIGNEDNESS,
FIELD_LSHIFT_U64,
FIELD_RSHIFT_U64,
};
for __builtin_preserve_field_info. The old
access offset relocation is covered by
FIELD_BYTE_OFFSET = 0.
An example:
struct s {
int a;
int b1:9;
int b2:4;
};
enum {
FIELD_BYTE_OFFSET = 0,
FIELD_BYTE_SIZE,
FIELD_EXISTENCE,
FIELD_SIGNEDNESS,
FIELD_LSHIFT_U64,
FIELD_RSHIFT_U64,
};
void bpf_probe_read(void *, unsigned, const void *);
int field_read(struct s *arg) {
unsigned long long ull = 0;
unsigned offset = __builtin_preserve_field_info(arg->b2, FIELD_BYTE_OFFSET);
unsigned size = __builtin_preserve_field_info(arg->b2, FIELD_BYTE_SIZE);
#ifdef USE_PROBE_READ
bpf_probe_read(&ull, size, (const void *)arg + offset);
unsigned lshift = __builtin_preserve_field_info(arg->b2, FIELD_LSHIFT_U64);
#if __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__
lshift = lshift + (size << 3) - 64;
#endif
#else
switch(size) {
case 1:
ull = *(unsigned char *)((void *)arg + offset); break;
case 2:
ull = *(unsigned short *)((void *)arg + offset); break;
case 4:
ull = *(unsigned int *)((void *)arg + offset); break;
case 8:
ull = *(unsigned long long *)((void *)arg + offset); break;
}
unsigned lshift = __builtin_preserve_field_info(arg->b2, FIELD_LSHIFT_U64);
#endif
ull <<= lshift;
if (__builtin_preserve_field_info(arg->b2, FIELD_SIGNEDNESS))
return (long long)ull >> __builtin_preserve_field_info(arg->b2, FIELD_RSHIFT_U64);
return ull >> __builtin_preserve_field_info(arg->b2, FIELD_RSHIFT_U64);
}
There is a minor overhead for bpf_probe_read() on big endian.
The code and relocation generated for field_read where bpf_probe_read() is
used to access argument data on little endian mode:
r3 = r1
r1 = 0
r1 = 4 <=== relocation (FIELD_BYTE_OFFSET)
r3 += r1
r1 = r10
r1 += -8
r2 = 4 <=== relocation (FIELD_BYTE_SIZE)
call bpf_probe_read
r2 = 51 <=== relocation (FIELD_LSHIFT_U64)
r1 = *(u64 *)(r10 - 8)
r1 <<= r2
r2 = 60 <=== relocation (FIELD_RSHIFT_U64)
r0 = r1
r0 >>= r2
r3 = 1 <=== relocation (FIELD_SIGNEDNESS)
if r3 == 0 goto LBB0_2
r1 s>>= r2
r0 = r1
LBB0_2:
exit
Compare to the above code between relocations FIELD_LSHIFT_U64 and
FIELD_LSHIFT_U64, the code with big endian mode has four more
instructions.
r1 = 41 <=== relocation (FIELD_LSHIFT_U64)
r6 += r1
r6 += -64
r6 <<= 32
r6 >>= 32
r1 = *(u64 *)(r10 - 8)
r1 <<= r6
r2 = 60 <=== relocation (FIELD_RSHIFT_U64)
The code and relocation generated when using direct load.
r2 = 0
r3 = 4
r4 = 4
if r4 s> 3 goto LBB0_3
if r4 == 1 goto LBB0_5
if r4 == 2 goto LBB0_6
goto LBB0_9
LBB0_6: # %sw.bb1
r1 += r3
r2 = *(u16 *)(r1 + 0)
goto LBB0_9
LBB0_3: # %entry
if r4 == 4 goto LBB0_7
if r4 == 8 goto LBB0_8
goto LBB0_9
LBB0_8: # %sw.bb9
r1 += r3
r2 = *(u64 *)(r1 + 0)
goto LBB0_9
LBB0_5: # %sw.bb
r1 += r3
r2 = *(u8 *)(r1 + 0)
goto LBB0_9
LBB0_7: # %sw.bb5
r1 += r3
r2 = *(u32 *)(r1 + 0)
LBB0_9: # %sw.epilog
r1 = 51
r2 <<= r1
r1 = 60
r0 = r2
r0 >>= r1
r3 = 1
if r3 == 0 goto LBB0_11
r2 s>>= r1
r0 = r2
LBB0_11: # %sw.epilog
exit
Considering verifier is able to do limited constant
propogation following branches. The following is the
code actually traversed.
r2 = 0
r3 = 4 <=== relocation
r4 = 4 <=== relocation
if r4 s> 3 goto LBB0_3
LBB0_3: # %entry
if r4 == 4 goto LBB0_7
LBB0_7: # %sw.bb5
r1 += r3
r2 = *(u32 *)(r1 + 0)
LBB0_9: # %sw.epilog
r1 = 51 <=== relocation
r2 <<= r1
r1 = 60 <=== relocation
r0 = r2
r0 >>= r1
r3 = 1
if r3 == 0 goto LBB0_11
r2 s>>= r1
r0 = r2
LBB0_11: # %sw.epilog
exit
For native load case, the load size is calculated to be the
same as the size of load width LLVM otherwise used to load
the value which is then used to extract the bitfield value.
Differential Revision: https://reviews.llvm.org/D67980
llvm-svn: 374099
2019-10-08 20:23:17 +02:00
|
|
|
FIELD_BYTE_OFFSET = 0,
|
|
|
|
FIELD_BYTE_SIZE,
|
|
|
|
FIELD_EXISTENCE,
|
|
|
|
FIELD_SIGNEDNESS,
|
|
|
|
FIELD_LSHIFT_U64,
|
|
|
|
FIELD_RSHIFT_U64,
|
[BPF] preserve debuginfo types for builtin __builtin__btf_type_id()
The builtin function
u32 btf_type_id = __builtin_btf_type_id(param, 0)
can help preserve type info for the following use case:
extern void foo(..., void *data, int size);
int test(...) {
struct t { int a; int b; int c; } d;
d.a = ...; d.b = ...; d.c = ...;
foo(..., &d, sizeof(d));
}
The function "foo" in the above only see raw data and does not
know what type of the data is. In certain cases, e.g., logging,
the additional type information will help pretty print.
This patch handles the builtin in BPF backend. It includes
an IR pass to translate the IR intrinsic to a load of
a global variable which carries the metadata, and an MI
pass to remove the intermediate load of the global variable.
Finally, in AsmPrinter pass, proper instruction are generated.
In the above example, the second argument for __builtin_btf_type_id()
is 0, which means a relocation for local adjustment,
i.e., w.r.t. bpf program BTF change, will be generated.
The value 1 for the second argument means
a relocation for remote adjustment, e.g., against vmlinux.
Differential Revision: https://reviews.llvm.org/D74572
2020-02-12 01:55:22 +01:00
|
|
|
BTF_TYPE_ID_LOCAL,
|
|
|
|
BTF_TYPE_ID_REMOTE,
|
2020-07-30 07:46:07 +02:00
|
|
|
TYPE_EXISTENCE,
|
|
|
|
TYPE_SIZE,
|
|
|
|
ENUM_VALUE_EXISTENCE,
|
|
|
|
ENUM_VALUE,
|
[BPF] do compile-once run-everywhere relocation for bitfields
A bpf specific clang intrinsic is introduced:
u32 __builtin_preserve_field_info(member_access, info_kind)
Depending on info_kind, different information will
be returned to the program. A relocation is also
recorded for this builtin so that bpf loader can
patch the instruction on the target host.
This clang intrinsic is used to get certain information
to facilitate struct/union member relocations.
The offset relocation is extended by 4 bytes to
include relocation kind.
Currently supported relocation kinds are
enum {
FIELD_BYTE_OFFSET = 0,
FIELD_BYTE_SIZE,
FIELD_EXISTENCE,
FIELD_SIGNEDNESS,
FIELD_LSHIFT_U64,
FIELD_RSHIFT_U64,
};
for __builtin_preserve_field_info. The old
access offset relocation is covered by
FIELD_BYTE_OFFSET = 0.
An example:
struct s {
int a;
int b1:9;
int b2:4;
};
enum {
FIELD_BYTE_OFFSET = 0,
FIELD_BYTE_SIZE,
FIELD_EXISTENCE,
FIELD_SIGNEDNESS,
FIELD_LSHIFT_U64,
FIELD_RSHIFT_U64,
};
void bpf_probe_read(void *, unsigned, const void *);
int field_read(struct s *arg) {
unsigned long long ull = 0;
unsigned offset = __builtin_preserve_field_info(arg->b2, FIELD_BYTE_OFFSET);
unsigned size = __builtin_preserve_field_info(arg->b2, FIELD_BYTE_SIZE);
#ifdef USE_PROBE_READ
bpf_probe_read(&ull, size, (const void *)arg + offset);
unsigned lshift = __builtin_preserve_field_info(arg->b2, FIELD_LSHIFT_U64);
#if __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__
lshift = lshift + (size << 3) - 64;
#endif
#else
switch(size) {
case 1:
ull = *(unsigned char *)((void *)arg + offset); break;
case 2:
ull = *(unsigned short *)((void *)arg + offset); break;
case 4:
ull = *(unsigned int *)((void *)arg + offset); break;
case 8:
ull = *(unsigned long long *)((void *)arg + offset); break;
}
unsigned lshift = __builtin_preserve_field_info(arg->b2, FIELD_LSHIFT_U64);
#endif
ull <<= lshift;
if (__builtin_preserve_field_info(arg->b2, FIELD_SIGNEDNESS))
return (long long)ull >> __builtin_preserve_field_info(arg->b2, FIELD_RSHIFT_U64);
return ull >> __builtin_preserve_field_info(arg->b2, FIELD_RSHIFT_U64);
}
There is a minor overhead for bpf_probe_read() on big endian.
The code and relocation generated for field_read where bpf_probe_read() is
used to access argument data on little endian mode:
r3 = r1
r1 = 0
r1 = 4 <=== relocation (FIELD_BYTE_OFFSET)
r3 += r1
r1 = r10
r1 += -8
r2 = 4 <=== relocation (FIELD_BYTE_SIZE)
call bpf_probe_read
r2 = 51 <=== relocation (FIELD_LSHIFT_U64)
r1 = *(u64 *)(r10 - 8)
r1 <<= r2
r2 = 60 <=== relocation (FIELD_RSHIFT_U64)
r0 = r1
r0 >>= r2
r3 = 1 <=== relocation (FIELD_SIGNEDNESS)
if r3 == 0 goto LBB0_2
r1 s>>= r2
r0 = r1
LBB0_2:
exit
Compare to the above code between relocations FIELD_LSHIFT_U64 and
FIELD_LSHIFT_U64, the code with big endian mode has four more
instructions.
r1 = 41 <=== relocation (FIELD_LSHIFT_U64)
r6 += r1
r6 += -64
r6 <<= 32
r6 >>= 32
r1 = *(u64 *)(r10 - 8)
r1 <<= r6
r2 = 60 <=== relocation (FIELD_RSHIFT_U64)
The code and relocation generated when using direct load.
r2 = 0
r3 = 4
r4 = 4
if r4 s> 3 goto LBB0_3
if r4 == 1 goto LBB0_5
if r4 == 2 goto LBB0_6
goto LBB0_9
LBB0_6: # %sw.bb1
r1 += r3
r2 = *(u16 *)(r1 + 0)
goto LBB0_9
LBB0_3: # %entry
if r4 == 4 goto LBB0_7
if r4 == 8 goto LBB0_8
goto LBB0_9
LBB0_8: # %sw.bb9
r1 += r3
r2 = *(u64 *)(r1 + 0)
goto LBB0_9
LBB0_5: # %sw.bb
r1 += r3
r2 = *(u8 *)(r1 + 0)
goto LBB0_9
LBB0_7: # %sw.bb5
r1 += r3
r2 = *(u32 *)(r1 + 0)
LBB0_9: # %sw.epilog
r1 = 51
r2 <<= r1
r1 = 60
r0 = r2
r0 >>= r1
r3 = 1
if r3 == 0 goto LBB0_11
r2 s>>= r1
r0 = r2
LBB0_11: # %sw.epilog
exit
Considering verifier is able to do limited constant
propogation following branches. The following is the
code actually traversed.
r2 = 0
r3 = 4 <=== relocation
r4 = 4 <=== relocation
if r4 s> 3 goto LBB0_3
LBB0_3: # %entry
if r4 == 4 goto LBB0_7
LBB0_7: # %sw.bb5
r1 += r3
r2 = *(u32 *)(r1 + 0)
LBB0_9: # %sw.epilog
r1 = 51 <=== relocation
r2 <<= r1
r1 = 60 <=== relocation
r0 = r2
r0 >>= r1
r3 = 1
if r3 == 0 goto LBB0_11
r2 s>>= r1
r0 = r2
LBB0_11: # %sw.epilog
exit
For native load case, the load size is calculated to be the
same as the size of load width LLVM otherwise used to load
the value which is then used to extract the bitfield value.
Differential Revision: https://reviews.llvm.org/D67980
llvm-svn: 374099
2019-10-08 20:23:17 +02:00
|
|
|
|
|
|
|
MAX_FIELD_RELOC_KIND,
|
|
|
|
};
|
[BPF] preserve debuginfo types for builtin __builtin__btf_type_id()
The builtin function
u32 btf_type_id = __builtin_btf_type_id(param, 0)
can help preserve type info for the following use case:
extern void foo(..., void *data, int size);
int test(...) {
struct t { int a; int b; int c; } d;
d.a = ...; d.b = ...; d.c = ...;
foo(..., &d, sizeof(d));
}
The function "foo" in the above only see raw data and does not
know what type of the data is. In certain cases, e.g., logging,
the additional type information will help pretty print.
This patch handles the builtin in BPF backend. It includes
an IR pass to translate the IR intrinsic to a load of
a global variable which carries the metadata, and an MI
pass to remove the intermediate load of the global variable.
Finally, in AsmPrinter pass, proper instruction are generated.
In the above example, the second argument for __builtin_btf_type_id()
is 0, which means a relocation for local adjustment,
i.e., w.r.t. bpf program BTF change, will be generated.
The value 1 for the second argument means
a relocation for remote adjustment, e.g., against vmlinux.
Differential Revision: https://reviews.llvm.org/D74572
2020-02-12 01:55:22 +01:00
|
|
|
|
|
|
|
enum BTFTypeIdFlag : uint32_t {
|
|
|
|
BTF_TYPE_ID_LOCAL_RELOC = 0,
|
|
|
|
BTF_TYPE_ID_REMOTE_RELOC,
|
|
|
|
|
|
|
|
MAX_BTF_TYPE_ID_FLAG,
|
|
|
|
};
|
|
|
|
|
2020-07-30 07:46:07 +02:00
|
|
|
enum PreserveTypeInfo : uint32_t {
|
|
|
|
PRESERVE_TYPE_INFO_EXISTENCE = 0,
|
|
|
|
PRESERVE_TYPE_INFO_SIZE,
|
|
|
|
|
|
|
|
MAX_PRESERVE_TYPE_INFO_FLAG,
|
|
|
|
};
|
|
|
|
|
|
|
|
enum PreserveEnumValue : uint32_t {
|
|
|
|
PRESERVE_ENUM_VALUE_EXISTENCE = 0,
|
|
|
|
PRESERVE_ENUM_VALUE,
|
|
|
|
|
|
|
|
MAX_PRESERVE_ENUM_VALUE_FLAG,
|
|
|
|
};
|
|
|
|
|
2019-10-10 17:33:09 +02:00
|
|
|
/// The attribute attached to globals representing a field access
|
2020-06-17 14:27:36 +02:00
|
|
|
static constexpr StringRef AmaAttr = "btf_ama";
|
[BPF] preserve debuginfo types for builtin __builtin__btf_type_id()
The builtin function
u32 btf_type_id = __builtin_btf_type_id(param, 0)
can help preserve type info for the following use case:
extern void foo(..., void *data, int size);
int test(...) {
struct t { int a; int b; int c; } d;
d.a = ...; d.b = ...; d.c = ...;
foo(..., &d, sizeof(d));
}
The function "foo" in the above only see raw data and does not
know what type of the data is. In certain cases, e.g., logging,
the additional type information will help pretty print.
This patch handles the builtin in BPF backend. It includes
an IR pass to translate the IR intrinsic to a load of
a global variable which carries the metadata, and an MI
pass to remove the intermediate load of the global variable.
Finally, in AsmPrinter pass, proper instruction are generated.
In the above example, the second argument for __builtin_btf_type_id()
is 0, which means a relocation for local adjustment,
i.e., w.r.t. bpf program BTF change, will be generated.
The value 1 for the second argument means
a relocation for remote adjustment, e.g., against vmlinux.
Differential Revision: https://reviews.llvm.org/D74572
2020-02-12 01:55:22 +01:00
|
|
|
/// The attribute attached to globals representing a type id
|
2020-06-17 14:27:36 +02:00
|
|
|
static constexpr StringRef TypeIdAttr = "btf_type_id";
|
BPF: move AbstractMemberAccess and PreserveDIType passes to EP_EarlyAsPossible
Move abstractMemberAccess and PreserveDIType passes as early as
possible, right after clang code generation.
Currently, compiler may transform the above code
p1 = llvm.bpf.builtin.preserve.struct.access(base, 0, 0);
p2 = llvm.bpf.builtin.preserve.struct.access(p1, 1, 2);
a = llvm.bpf.builtin.preserve_field_info(p2, EXIST);
if (a) {
p1 = llvm.bpf.builtin.preserve.struct.access(base, 0, 0);
p2 = llvm.bpf.builtin.preserve.struct.access(p1, 1, 2);
bpf_probe_read(buf, buf_size, p2);
}
to
p1 = llvm.bpf.builtin.preserve.struct.access(base, 0, 0);
p2 = llvm.bpf.builtin.preserve.struct.access(p1, 1, 2);
a = llvm.bpf.builtin.preserve_field_info(p2, EXIST);
if (a) {
bpf_probe_read(buf, buf_size, p2);
}
and eventually assembly code looks like
reloc_exist = 1;
reloc_member_offset = 10; //calculate member offset from base
p2 = base + reloc_member_offset;
if (reloc_exist) {
bpf_probe_read(bpf, buf_size, p2);
}
if during libbpf relocation resolution, reloc_exist is actually
resolved to 0 (not exist), reloc_member_offset relocation cannot
be resolved and will be patched with illegal instruction.
This will cause verifier failure.
This patch attempts to address this issue by do chaining
analysis and replace chains with special globals right
after clang code gen. This will remove the cse possibility
described in the above. The IR typically looks like
%6 = load @llvm.sk_buff:0:50$0:0:0:2:0
%7 = bitcast %struct.sk_buff* %2 to i8*
%8 = getelementptr i8, i8* %7, %6
for a particular address computation relocation.
But this transformation has another consequence, code sinking
may happen like below:
PHI = <possibly different @preserve_*_access_globals>
%7 = bitcast %struct.sk_buff* %2 to i8*
%8 = getelementptr i8, i8* %7, %6
For such cases, we will not able to generate relocations since
multiple relocations are merged into one.
This patch introduced a passthrough builtin
to prevent such optimization. Looks like inline assembly has more
impact for optimizaiton, e.g., inlining. Using passthrough has
less impact on optimizations.
A new IR pass is introduced at the beginning of target-dependent
IR optimization, which does:
- report fatal error if any reloc global in PHI nodes
- remove all bpf passthrough builtin functions
Changes for existing CORE tests:
- for clang tests, add "-Xclang -disable-llvm-passes" flags to
avoid builtin->reloc_global transformation so the test is still
able to check correctness for clang generated IR.
- for llvm CodeGen/BPF tests, add "opt -O2 <ir_file> | llvm-dis" command
before "llc" command since "opt" is needed to call newly-placed
builtin->reloc_global transformation. Add target triple in the IR
file since "opt" requires it.
- Since target triple is added in IR file, if a test may produce
different results for different endianness, two tests will be
created, one for bpfeb and another for bpfel, e.g., some tests
for relocation of lshift/rshift of bitfields.
- field-reloc-bitfield-1.ll has different relocations compared to
old codes. This is because for the structure in the test,
new code returns struct layout alignment 4 while old code
is 8. Align 8 is more precise and permits double load. With align 4,
the new mechanism uses 4-byte load, so generating different
relocations.
- test intrinsic-transforms.ll is removed. This is used to test
cse on intrinsics so we do not lose metadata. Now metadata is attached
to global and not instruction, it won't get lost with cse.
Differential Revision: https://reviews.llvm.org/D87153
2020-09-03 07:56:41 +02:00
|
|
|
|
|
|
|
/// llvm.bpf.passthrough builtin seq number
|
|
|
|
static uint32_t SeqNum;
|
|
|
|
|
|
|
|
/// Insert a bpf passthrough builtin function.
|
|
|
|
static Instruction *insertPassThrough(Module *M, BasicBlock *BB,
|
|
|
|
Instruction *Input,
|
|
|
|
Instruction *Before);
|
[BPF] Support for compile once and run everywhere
Introduction
============
This patch added intial support for bpf program compile once
and run everywhere (CO-RE).
The main motivation is for bpf program which depends on
kernel headers which may vary between different kernel versions.
The initial discussion can be found at https://lwn.net/Articles/773198/.
Currently, bpf program accesses kernel internal data structure
through bpf_probe_read() helper. The idea is to capture the
kernel data structure to be accessed through bpf_probe_read()
and relocate them on different kernel versions.
On each host, right before bpf program load, the bpfloader
will look at the types of the native linux through vmlinux BTF,
calculates proper access offset and patch the instruction.
To accommodate this, three intrinsic functions
preserve_{array,union,struct}_access_index
are introduced which in clang will preserve the base pointer,
struct/union/array access_index and struct/union debuginfo type
information. Later, bpf IR pass can reconstruct the whole gep
access chains without looking at gep itself.
This patch did the following:
. An IR pass is added to convert preserve_*_access_index to
global variable who name encodes the getelementptr
access pattern. The global variable has metadata
attached to describe the corresponding struct/union
debuginfo type.
. An SimplifyPatchable MachineInstruction pass is added
to remove unnecessary loads.
. The BTF output pass is enhanced to generate relocation
records located in .BTF.ext section.
Typical CO-RE also needs support of global variables which can
be assigned to different values to different hosts. For example,
kernel version can be used to guard different versions of codes.
This patch added the support for patchable externals as well.
Example
=======
The following is an example.
struct pt_regs {
long arg1;
long arg2;
};
struct sk_buff {
int i;
struct net_device *dev;
};
#define _(x) (__builtin_preserve_access_index(x))
static int (*bpf_probe_read)(void *dst, int size, const void *unsafe_ptr) =
(void *) 4;
extern __attribute__((section(".BPF.patchable_externs"))) unsigned __kernel_version;
int bpf_prog(struct pt_regs *ctx) {
struct net_device *dev = 0;
// ctx->arg* does not need bpf_probe_read
if (__kernel_version >= 41608)
bpf_probe_read(&dev, sizeof(dev), _(&((struct sk_buff *)ctx->arg1)->dev));
else
bpf_probe_read(&dev, sizeof(dev), _(&((struct sk_buff *)ctx->arg2)->dev));
return dev != 0;
}
In the above, we want to translate the third argument of
bpf_probe_read() as relocations.
-bash-4.4$ clang -target bpf -O2 -g -S trace.c
The compiler will generate two new subsections in .BTF.ext,
OffsetReloc and ExternReloc.
OffsetReloc is to record the structure member offset operations,
and ExternalReloc is to record the external globals where
only u8, u16, u32 and u64 are supported.
BPFOffsetReloc Size
struct SecLOffsetReloc for ELF section #1
A number of struct BPFOffsetReloc for ELF section #1
struct SecOffsetReloc for ELF section #2
A number of struct BPFOffsetReloc for ELF section #2
...
BPFExternReloc Size
struct SecExternReloc for ELF section #1
A number of struct BPFExternReloc for ELF section #1
struct SecExternReloc for ELF section #2
A number of struct BPFExternReloc for ELF section #2
struct BPFOffsetReloc {
uint32_t InsnOffset; ///< Byte offset in this section
uint32_t TypeID; ///< TypeID for the relocation
uint32_t OffsetNameOff; ///< The string to traverse types
};
struct BPFExternReloc {
uint32_t InsnOffset; ///< Byte offset in this section
uint32_t ExternNameOff; ///< The string for external variable
};
Note that only externs with attribute section ".BPF.patchable_externs"
are considered for Extern Reloc which will be patched by bpf loader
right before the load.
For the above test case, two offset records and one extern record
will be generated:
OffsetReloc records:
.long .Ltmp12 # Insn Offset
.long 7 # TypeId
.long 242 # Type Decode String
.long .Ltmp18 # Insn Offset
.long 7 # TypeId
.long 242 # Type Decode String
ExternReloc record:
.long .Ltmp5 # Insn Offset
.long 165 # External Variable
In string table:
.ascii "0:1" # string offset=242
.ascii "__kernel_version" # string offset=165
The default member offset can be calculated as
the 2nd member offset (0 representing the 1st member) of struct "sk_buff".
The asm code:
.Ltmp5:
.Ltmp6:
r2 = 0
r3 = 41608
.Ltmp7:
.Ltmp8:
.loc 1 18 9 is_stmt 0 # t.c:18:9
.Ltmp9:
if r3 > r2 goto LBB0_2
.Ltmp10:
.Ltmp11:
.loc 1 0 9 # t.c:0:9
.Ltmp12:
r2 = 8
.Ltmp13:
.loc 1 19 66 is_stmt 1 # t.c:19:66
.Ltmp14:
.Ltmp15:
r3 = *(u64 *)(r1 + 0)
goto LBB0_3
.Ltmp16:
.Ltmp17:
LBB0_2:
.loc 1 0 66 is_stmt 0 # t.c:0:66
.Ltmp18:
r2 = 8
.loc 1 21 66 is_stmt 1 # t.c:21:66
.Ltmp19:
r3 = *(u64 *)(r1 + 8)
.Ltmp20:
.Ltmp21:
LBB0_3:
.loc 1 0 66 is_stmt 0 # t.c:0:66
r3 += r2
r1 = r10
.Ltmp22:
.Ltmp23:
.Ltmp24:
r1 += -8
r2 = 8
call 4
For instruction .Ltmp12 and .Ltmp18, "r2 = 8", the number
8 is the structure offset based on the current BTF.
Loader needs to adjust it if it changes on the host.
For instruction .Ltmp5, "r2 = 0", the external variable
got a default value 0, loader needs to supply an appropriate
value for the particular host.
Compiling to generate object code and disassemble:
0000000000000000 bpf_prog:
0: b7 02 00 00 00 00 00 00 r2 = 0
1: 7b 2a f8 ff 00 00 00 00 *(u64 *)(r10 - 8) = r2
2: b7 02 00 00 00 00 00 00 r2 = 0
3: b7 03 00 00 88 a2 00 00 r3 = 41608
4: 2d 23 03 00 00 00 00 00 if r3 > r2 goto +3 <LBB0_2>
5: b7 02 00 00 08 00 00 00 r2 = 8
6: 79 13 00 00 00 00 00 00 r3 = *(u64 *)(r1 + 0)
7: 05 00 02 00 00 00 00 00 goto +2 <LBB0_3>
0000000000000040 LBB0_2:
8: b7 02 00 00 08 00 00 00 r2 = 8
9: 79 13 08 00 00 00 00 00 r3 = *(u64 *)(r1 + 8)
0000000000000050 LBB0_3:
10: 0f 23 00 00 00 00 00 00 r3 += r2
11: bf a1 00 00 00 00 00 00 r1 = r10
12: 07 01 00 00 f8 ff ff ff r1 += -8
13: b7 02 00 00 08 00 00 00 r2 = 8
14: 85 00 00 00 04 00 00 00 call 4
Instructions #2, #5 and #8 need relocation resoutions from the loader.
Signed-off-by: Yonghong Song <yhs@fb.com>
Differential Revision: https://reviews.llvm.org/D61524
llvm-svn: 365503
2019-07-09 17:28:41 +02:00
|
|
|
};
|
|
|
|
|
|
|
|
} // namespace llvm
|
|
|
|
|
|
|
|
#endif
|