RPCS3/llvm-mirror
1
0
Fork 0
mirror of https://github.com/RPCS3/llvm-mirror.git synced 2024-10-22 20:43:44 +02:00
Code Issues Projects Releases Wiki Activity
c0c2a062e1
llvm-mirror/test/Transforms/SROA/phi-and-select.ll

603 lines
15 KiB
LLVM
Raw Normal View History

Introduce a new SROA implementation. This is essentially a ground up re-think of the SROA pass in LLVM. It was initially inspired by a few problems with the existing pass: - It is subject to the bane of my existence in optimizations: arbitrary thresholds. - It is overly conservative about which constructs can be split and promoted. - The vector value replacement aspect is separated from the splitting logic, missing many opportunities where splitting and vector value formation can work together. - The splitting is entirely based around the underlying type of the alloca, despite this type often having little to do with the reality of how that memory is used. This is especially prevelant with unions and base classes where we tail-pack derived members. - When splitting fails (often due to the thresholds), the vector value replacement (again because it is separate) can kick in for preposterous cases where we simply should have split the value. This results in forming i1024 and i2048 integer "bit vectors" that tremendously slow down subsequnet IR optimizations (due to large APInts) and impede the backend's lowering. The new design takes an approach that fundamentally is not susceptible to many of these problems. It is the result of a discusison between myself and Duncan Sands over IRC about how to premptively avoid these types of problems and how to do SROA in a more principled way. Since then, it has evolved and grown, but this remains an important aspect: it fixes real world problems with the SROA process today. First, the transform of SROA actually has little to do with replacement. It has more to do with splitting. The goal is to take an aggregate alloca and form a composition of scalar allocas which can replace it and will be most suitable to the eventual replacement by scalar SSA values. The actual replacement is performed by mem2reg (and in the future SSAUpdater). The splitting is divided into four phases. The first phase is an analysis of the uses of the alloca. This phase recursively walks uses, building up a dense datastructure representing the ranges of the alloca's memory actually used and checking for uses which inhibit any aspects of the transform such as the escape of a pointer. Once we have a mapping of the ranges of the alloca used by individual operations, we compute a partitioning of the used ranges. Some uses are inherently splittable (such as memcpy and memset), while scalar uses are not splittable. The goal is to build a partitioning that has the minimum number of splits while placing each unsplittable use in its own partition. Overlapping unsplittable uses belong to the same partition. This is the target split of the aggregate alloca, and it maximizes the number of scalar accesses which become accesses to their own alloca and candidates for promotion. Third, we re-walk the uses of the alloca and assign each specific memory access to all the partitions touched so that we have dense use-lists for each partition. Finally, we build a new, smaller alloca for each partition and rewrite each use of that partition to use the new alloca. During this phase the pass will also work very hard to transform uses of an alloca into a form suitable for promotion, including forming vector operations, speculating loads throguh PHI nodes and selects, etc. After splitting is complete, each newly refined alloca that is a candidate for promotion to a scalar SSA value is run through mem2reg. There are lots of reasonably detailed comments in the source code about the design and algorithms, and I'm going to be trying to improve them in subsequent commits to ensure this is well documented, as the new pass is in many ways more complex than the old one. Some of this is still a WIP, but the current state is reasonbly stable. It has passed bootstrap, the nightly test suite, and Duncan has run it successfully through the ACATS and DragonEgg test suites. That said, it remains behind a default-off flag until the last few pieces are in place, and full testing can be done. Specific areas I'm looking at next: - Improved comments and some code cleanup from reviews. - SSAUpdater and enabling this pass inside the CGSCC pass manager. - Some datastructure tuning and compile-time measurements. - More aggressive FCA splitting and vector formation. Many thanks to Duncan Sands for the thorough final review, as well as Benjamin Kramer for lots of review during the process of writing this pass, and Daniel Berlin for reviewing the data structures and algorithms and general theory of the pass. Also, several other people on IRC, over lunch tables, etc for lots of feedback and advice. llvm-svn: 163883
2012-09-14 11:22:59 +02:00
; RUN: opt < %s -sroa -S | FileCheck %s
Teach the integer-promotion rewrite strategy to be endianness aware. Sorry for this being broken so long. =/ As part of this, switch all of the existing tests to be Little Endian, which is the behavior I was asserting in them anyways! Add in a new big-endian test that checks the interesting behavior there. Another part of this is to tighten the rules abotu when we perform the full-integer promotion. This logic now rejects cases where there fully promoted integer is a non-multiple-of-8 bitwidth or cases where the loads or stores touch bits which are in the allocated space of the alloca but are not loaded or stored when accessing the integer. Sadly, these aren't really observable today as the rest of the pass will already ensure the invariants hold. However, the latter situation is likely to become a potential concern in the future. Thanks to Benjamin and Duncan for early review of this patch. I'm still looking into whether there are further endianness issues, please let me know if anyone sees BE failures persisting past this. llvm-svn: 165219
2012-10-04 12:39:28 +02:00
target datalayout = "e-p:64:64:64-i1:8:8-i8:8:8-i16:16:16-i32:32:32-i64:32:64-f32:32:32-f64:64:64-v64:64:64-v128:128:128-a0:0:64-n8:16:32:64"
Introduce a new SROA implementation. This is essentially a ground up re-think of the SROA pass in LLVM. It was initially inspired by a few problems with the existing pass: - It is subject to the bane of my existence in optimizations: arbitrary thresholds. - It is overly conservative about which constructs can be split and promoted. - The vector value replacement aspect is separated from the splitting logic, missing many opportunities where splitting and vector value formation can work together. - The splitting is entirely based around the underlying type of the alloca, despite this type often having little to do with the reality of how that memory is used. This is especially prevelant with unions and base classes where we tail-pack derived members. - When splitting fails (often due to the thresholds), the vector value replacement (again because it is separate) can kick in for preposterous cases where we simply should have split the value. This results in forming i1024 and i2048 integer "bit vectors" that tremendously slow down subsequnet IR optimizations (due to large APInts) and impede the backend's lowering. The new design takes an approach that fundamentally is not susceptible to many of these problems. It is the result of a discusison between myself and Duncan Sands over IRC about how to premptively avoid these types of problems and how to do SROA in a more principled way. Since then, it has evolved and grown, but this remains an important aspect: it fixes real world problems with the SROA process today. First, the transform of SROA actually has little to do with replacement. It has more to do with splitting. The goal is to take an aggregate alloca and form a composition of scalar allocas which can replace it and will be most suitable to the eventual replacement by scalar SSA values. The actual replacement is performed by mem2reg (and in the future SSAUpdater). The splitting is divided into four phases. The first phase is an analysis of the uses of the alloca. This phase recursively walks uses, building up a dense datastructure representing the ranges of the alloca's memory actually used and checking for uses which inhibit any aspects of the transform such as the escape of a pointer. Once we have a mapping of the ranges of the alloca used by individual operations, we compute a partitioning of the used ranges. Some uses are inherently splittable (such as memcpy and memset), while scalar uses are not splittable. The goal is to build a partitioning that has the minimum number of splits while placing each unsplittable use in its own partition. Overlapping unsplittable uses belong to the same partition. This is the target split of the aggregate alloca, and it maximizes the number of scalar accesses which become accesses to their own alloca and candidates for promotion. Third, we re-walk the uses of the alloca and assign each specific memory access to all the partitions touched so that we have dense use-lists for each partition. Finally, we build a new, smaller alloca for each partition and rewrite each use of that partition to use the new alloca. During this phase the pass will also work very hard to transform uses of an alloca into a form suitable for promotion, including forming vector operations, speculating loads throguh PHI nodes and selects, etc. After splitting is complete, each newly refined alloca that is a candidate for promotion to a scalar SSA value is run through mem2reg. There are lots of reasonably detailed comments in the source code about the design and algorithms, and I'm going to be trying to improve them in subsequent commits to ensure this is well documented, as the new pass is in many ways more complex than the old one. Some of this is still a WIP, but the current state is reasonbly stable. It has passed bootstrap, the nightly test suite, and Duncan has run it successfully through the ACATS and DragonEgg test suites. That said, it remains behind a default-off flag until the last few pieces are in place, and full testing can be done. Specific areas I'm looking at next: - Improved comments and some code cleanup from reviews. - SSAUpdater and enabling this pass inside the CGSCC pass manager. - Some datastructure tuning and compile-time measurements. - More aggressive FCA splitting and vector formation. Many thanks to Duncan Sands for the thorough final review, as well as Benjamin Kramer for lots of review during the process of writing this pass, and Daniel Berlin for reviewing the data structures and algorithms and general theory of the pass. Also, several other people on IRC, over lunch tables, etc for lots of feedback and advice. llvm-svn: 163883
2012-09-14 11:22:59 +02:00
define i32 @test1() {
Update Transforms tests to use CHECK-LABEL for easier debugging. No functionality change. This update was done with the following bash script: find test/Transforms -name "*.ll" | \ while read NAME; do echo "$NAME" if ! grep -q "^; *RUN: *llc" $NAME; then TEMP=`mktemp -t temp` cp $NAME $TEMP sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \ while read FUNC; do sed -i '' "s/;\(.*\)\([A-Za-z0-9_]*\):\( *\)@$FUNC\([( ]*\)\$/;\1\2-LABEL:\3@$FUNC(/g" $TEMP done mv $TEMP $NAME fi done llvm-svn: 186268
2013-07-14 03:42:54 +02:00
; CHECK-LABEL: @test1(
Introduce a new SROA implementation. This is essentially a ground up re-think of the SROA pass in LLVM. It was initially inspired by a few problems with the existing pass: - It is subject to the bane of my existence in optimizations: arbitrary thresholds. - It is overly conservative about which constructs can be split and promoted. - The vector value replacement aspect is separated from the splitting logic, missing many opportunities where splitting and vector value formation can work together. - The splitting is entirely based around the underlying type of the alloca, despite this type often having little to do with the reality of how that memory is used. This is especially prevelant with unions and base classes where we tail-pack derived members. - When splitting fails (often due to the thresholds), the vector value replacement (again because it is separate) can kick in for preposterous cases where we simply should have split the value. This results in forming i1024 and i2048 integer "bit vectors" that tremendously slow down subsequnet IR optimizations (due to large APInts) and impede the backend's lowering. The new design takes an approach that fundamentally is not susceptible to many of these problems. It is the result of a discusison between myself and Duncan Sands over IRC about how to premptively avoid these types of problems and how to do SROA in a more principled way. Since then, it has evolved and grown, but this remains an important aspect: it fixes real world problems with the SROA process today. First, the transform of SROA actually has little to do with replacement. It has more to do with splitting. The goal is to take an aggregate alloca and form a composition of scalar allocas which can replace it and will be most suitable to the eventual replacement by scalar SSA values. The actual replacement is performed by mem2reg (and in the future SSAUpdater). The splitting is divided into four phases. The first phase is an analysis of the uses of the alloca. This phase recursively walks uses, building up a dense datastructure representing the ranges of the alloca's memory actually used and checking for uses which inhibit any aspects of the transform such as the escape of a pointer. Once we have a mapping of the ranges of the alloca used by individual operations, we compute a partitioning of the used ranges. Some uses are inherently splittable (such as memcpy and memset), while scalar uses are not splittable. The goal is to build a partitioning that has the minimum number of splits while placing each unsplittable use in its own partition. Overlapping unsplittable uses belong to the same partition. This is the target split of the aggregate alloca, and it maximizes the number of scalar accesses which become accesses to their own alloca and candidates for promotion. Third, we re-walk the uses of the alloca and assign each specific memory access to all the partitions touched so that we have dense use-lists for each partition. Finally, we build a new, smaller alloca for each partition and rewrite each use of that partition to use the new alloca. During this phase the pass will also work very hard to transform uses of an alloca into a form suitable for promotion, including forming vector operations, speculating loads throguh PHI nodes and selects, etc. After splitting is complete, each newly refined alloca that is a candidate for promotion to a scalar SSA value is run through mem2reg. There are lots of reasonably detailed comments in the source code about the design and algorithms, and I'm going to be trying to improve them in subsequent commits to ensure this is well documented, as the new pass is in many ways more complex than the old one. Some of this is still a WIP, but the current state is reasonbly stable. It has passed bootstrap, the nightly test suite, and Duncan has run it successfully through the ACATS and DragonEgg test suites. That said, it remains behind a default-off flag until the last few pieces are in place, and full testing can be done. Specific areas I'm looking at next: - Improved comments and some code cleanup from reviews. - SSAUpdater and enabling this pass inside the CGSCC pass manager. - Some datastructure tuning and compile-time measurements. - More aggressive FCA splitting and vector formation. Many thanks to Duncan Sands for the thorough final review, as well as Benjamin Kramer for lots of review during the process of writing this pass, and Daniel Berlin for reviewing the data structures and algorithms and general theory of the pass. Also, several other people on IRC, over lunch tables, etc for lots of feedback and advice. llvm-svn: 163883
2012-09-14 11:22:59 +02:00
entry:
%a = alloca [2 x i32]
; CHECK-NOT: alloca
%a0 = getelementptr [2 x i32]* %a, i64 0, i32 0
%a1 = getelementptr [2 x i32]* %a, i64 0, i32 1
store i32 0, i32* %a0
store i32 1, i32* %a1
%v0 = load i32* %a0
%v1 = load i32* %a1
; CHECK-NOT: store
; CHECK-NOT: load
%cond = icmp sle i32 %v0, %v1
br i1 %cond, label %then, label %exit
then:
br label %exit
exit:
%phi = phi i32* [ %a1, %then ], [ %a0, %entry ]
; CHECK: phi i32 [ 1, %{{.*}} ], [ 0, %{{.*}} ]
%result = load i32* %phi
ret i32 %result
}
define i32 @test2() {
Update Transforms tests to use CHECK-LABEL for easier debugging. No functionality change. This update was done with the following bash script: find test/Transforms -name "*.ll" | \ while read NAME; do echo "$NAME" if ! grep -q "^; *RUN: *llc" $NAME; then TEMP=`mktemp -t temp` cp $NAME $TEMP sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \ while read FUNC; do sed -i '' "s/;\(.*\)\([A-Za-z0-9_]*\):\( *\)@$FUNC\([( ]*\)\$/;\1\2-LABEL:\3@$FUNC(/g" $TEMP done mv $TEMP $NAME fi done llvm-svn: 186268
2013-07-14 03:42:54 +02:00
; CHECK-LABEL: @test2(
Introduce a new SROA implementation. This is essentially a ground up re-think of the SROA pass in LLVM. It was initially inspired by a few problems with the existing pass: - It is subject to the bane of my existence in optimizations: arbitrary thresholds. - It is overly conservative about which constructs can be split and promoted. - The vector value replacement aspect is separated from the splitting logic, missing many opportunities where splitting and vector value formation can work together. - The splitting is entirely based around the underlying type of the alloca, despite this type often having little to do with the reality of how that memory is used. This is especially prevelant with unions and base classes where we tail-pack derived members. - When splitting fails (often due to the thresholds), the vector value replacement (again because it is separate) can kick in for preposterous cases where we simply should have split the value. This results in forming i1024 and i2048 integer "bit vectors" that tremendously slow down subsequnet IR optimizations (due to large APInts) and impede the backend's lowering. The new design takes an approach that fundamentally is not susceptible to many of these problems. It is the result of a discusison between myself and Duncan Sands over IRC about how to premptively avoid these types of problems and how to do SROA in a more principled way. Since then, it has evolved and grown, but this remains an important aspect: it fixes real world problems with the SROA process today. First, the transform of SROA actually has little to do with replacement. It has more to do with splitting. The goal is to take an aggregate alloca and form a composition of scalar allocas which can replace it and will be most suitable to the eventual replacement by scalar SSA values. The actual replacement is performed by mem2reg (and in the future SSAUpdater). The splitting is divided into four phases. The first phase is an analysis of the uses of the alloca. This phase recursively walks uses, building up a dense datastructure representing the ranges of the alloca's memory actually used and checking for uses which inhibit any aspects of the transform such as the escape of a pointer. Once we have a mapping of the ranges of the alloca used by individual operations, we compute a partitioning of the used ranges. Some uses are inherently splittable (such as memcpy and memset), while scalar uses are not splittable. The goal is to build a partitioning that has the minimum number of splits while placing each unsplittable use in its own partition. Overlapping unsplittable uses belong to the same partition. This is the target split of the aggregate alloca, and it maximizes the number of scalar accesses which become accesses to their own alloca and candidates for promotion. Third, we re-walk the uses of the alloca and assign each specific memory access to all the partitions touched so that we have dense use-lists for each partition. Finally, we build a new, smaller alloca for each partition and rewrite each use of that partition to use the new alloca. During this phase the pass will also work very hard to transform uses of an alloca into a form suitable for promotion, including forming vector operations, speculating loads throguh PHI nodes and selects, etc. After splitting is complete, each newly refined alloca that is a candidate for promotion to a scalar SSA value is run through mem2reg. There are lots of reasonably detailed comments in the source code about the design and algorithms, and I'm going to be trying to improve them in subsequent commits to ensure this is well documented, as the new pass is in many ways more complex than the old one. Some of this is still a WIP, but the current state is reasonbly stable. It has passed bootstrap, the nightly test suite, and Duncan has run it successfully through the ACATS and DragonEgg test suites. That said, it remains behind a default-off flag until the last few pieces are in place, and full testing can be done. Specific areas I'm looking at next: - Improved comments and some code cleanup from reviews. - SSAUpdater and enabling this pass inside the CGSCC pass manager. - Some datastructure tuning and compile-time measurements. - More aggressive FCA splitting and vector formation. Many thanks to Duncan Sands for the thorough final review, as well as Benjamin Kramer for lots of review during the process of writing this pass, and Daniel Berlin for reviewing the data structures and algorithms and general theory of the pass. Also, several other people on IRC, over lunch tables, etc for lots of feedback and advice. llvm-svn: 163883
2012-09-14 11:22:59 +02:00
entry:
%a = alloca [2 x i32]
; CHECK-NOT: alloca
%a0 = getelementptr [2 x i32]* %a, i64 0, i32 0
%a1 = getelementptr [2 x i32]* %a, i64 0, i32 1
store i32 0, i32* %a0
store i32 1, i32* %a1
%v0 = load i32* %a0
%v1 = load i32* %a1
; CHECK-NOT: store
; CHECK-NOT: load
%cond = icmp sle i32 %v0, %v1
%select = select i1 %cond, i32* %a1, i32* %a0
; CHECK: select i1 %{{.*}}, i32 1, i32 0
%result = load i32* %select
ret i32 %result
}
define i32 @test3(i32 %x) {
Update Transforms tests to use CHECK-LABEL for easier debugging. No functionality change. This update was done with the following bash script: find test/Transforms -name "*.ll" | \ while read NAME; do echo "$NAME" if ! grep -q "^; *RUN: *llc" $NAME; then TEMP=`mktemp -t temp` cp $NAME $TEMP sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \ while read FUNC; do sed -i '' "s/;\(.*\)\([A-Za-z0-9_]*\):\( *\)@$FUNC\([( ]*\)\$/;\1\2-LABEL:\3@$FUNC(/g" $TEMP done mv $TEMP $NAME fi done llvm-svn: 186268
2013-07-14 03:42:54 +02:00
; CHECK-LABEL: @test3(
Introduce a new SROA implementation. This is essentially a ground up re-think of the SROA pass in LLVM. It was initially inspired by a few problems with the existing pass: - It is subject to the bane of my existence in optimizations: arbitrary thresholds. - It is overly conservative about which constructs can be split and promoted. - The vector value replacement aspect is separated from the splitting logic, missing many opportunities where splitting and vector value formation can work together. - The splitting is entirely based around the underlying type of the alloca, despite this type often having little to do with the reality of how that memory is used. This is especially prevelant with unions and base classes where we tail-pack derived members. - When splitting fails (often due to the thresholds), the vector value replacement (again because it is separate) can kick in for preposterous cases where we simply should have split the value. This results in forming i1024 and i2048 integer "bit vectors" that tremendously slow down subsequnet IR optimizations (due to large APInts) and impede the backend's lowering. The new design takes an approach that fundamentally is not susceptible to many of these problems. It is the result of a discusison between myself and Duncan Sands over IRC about how to premptively avoid these types of problems and how to do SROA in a more principled way. Since then, it has evolved and grown, but this remains an important aspect: it fixes real world problems with the SROA process today. First, the transform of SROA actually has little to do with replacement. It has more to do with splitting. The goal is to take an aggregate alloca and form a composition of scalar allocas which can replace it and will be most suitable to the eventual replacement by scalar SSA values. The actual replacement is performed by mem2reg (and in the future SSAUpdater). The splitting is divided into four phases. The first phase is an analysis of the uses of the alloca. This phase recursively walks uses, building up a dense datastructure representing the ranges of the alloca's memory actually used and checking for uses which inhibit any aspects of the transform such as the escape of a pointer. Once we have a mapping of the ranges of the alloca used by individual operations, we compute a partitioning of the used ranges. Some uses are inherently splittable (such as memcpy and memset), while scalar uses are not splittable. The goal is to build a partitioning that has the minimum number of splits while placing each unsplittable use in its own partition. Overlapping unsplittable uses belong to the same partition. This is the target split of the aggregate alloca, and it maximizes the number of scalar accesses which become accesses to their own alloca and candidates for promotion. Third, we re-walk the uses of the alloca and assign each specific memory access to all the partitions touched so that we have dense use-lists for each partition. Finally, we build a new, smaller alloca for each partition and rewrite each use of that partition to use the new alloca. During this phase the pass will also work very hard to transform uses of an alloca into a form suitable for promotion, including forming vector operations, speculating loads throguh PHI nodes and selects, etc. After splitting is complete, each newly refined alloca that is a candidate for promotion to a scalar SSA value is run through mem2reg. There are lots of reasonably detailed comments in the source code about the design and algorithms, and I'm going to be trying to improve them in subsequent commits to ensure this is well documented, as the new pass is in many ways more complex than the old one. Some of this is still a WIP, but the current state is reasonbly stable. It has passed bootstrap, the nightly test suite, and Duncan has run it successfully through the ACATS and DragonEgg test suites. That said, it remains behind a default-off flag until the last few pieces are in place, and full testing can be done. Specific areas I'm looking at next: - Improved comments and some code cleanup from reviews. - SSAUpdater and enabling this pass inside the CGSCC pass manager. - Some datastructure tuning and compile-time measurements. - More aggressive FCA splitting and vector formation. Many thanks to Duncan Sands for the thorough final review, as well as Benjamin Kramer for lots of review during the process of writing this pass, and Daniel Berlin for reviewing the data structures and algorithms and general theory of the pass. Also, several other people on IRC, over lunch tables, etc for lots of feedback and advice. llvm-svn: 163883
2012-09-14 11:22:59 +02:00
entry:
%a = alloca [2 x i32]
; CHECK-NOT: alloca
Refactor the PartitionUse structure to actually use the Use* instead of a pair of instructions, one for the used pointer and the second for the user. This simplifies the representation and also makes it more dense. This was noticed because of the miscompile in PR13926. In that case, we were running up against a fundamental "bad idea" in the speculation of PHI and select instructions: the speculation and rewriting are interleaved, which requires phi speculation to also perform load rewriting! This is bad, and causes us to miss opportunities to do (for example) vector rewriting only exposed after PHI speculation, etc etc. It also, in the old system, required us to insert *new* load uses into the current partition's use list, which would then be ignored during rewriting because we had already extracted an end iterator for the use list. The appending behavior (and much of the other oddities) stem from the strange de-duplication strategy in the PartitionUse builder. Amusingly, all this went without notice for so long because it could only be triggered by having *different* GEPs into the same partition of the same alloca, where both different GEPs were operands of a single PHI, and where the GEP which was not encountered first also had multiple uses within that same PHI node... Hence the insane steps required to reproduce. So, step one in fixing this fundamental bad idea is to make the PartitionUse actually contain a Use*, and to make the builder do proper deduplication instead of funky de-duplication. This is enough to remove the appending behavior, and fix the miscompile in PR13926, but there is more work to be done here. Subsequent commits will lift the speculation into its own visitor. It'll be a useful step toward potentially extracting all of the speculation logic into a generic utility transform. The existing PHI test case for repeated operands has been made more extreme to catch even these issues. This test case, run through the old pass, will exactly reproduce the miscompile from PR13926. ;] We were so close here! llvm-svn: 164925
2012-10-01 03:49:22 +02:00
; Note that we build redundant GEPs here to ensure that having different GEPs
; into the same alloca partation continues to work with PHI speculation. This
; was the underlying cause of PR13926.
Introduce a new SROA implementation. This is essentially a ground up re-think of the SROA pass in LLVM. It was initially inspired by a few problems with the existing pass: - It is subject to the bane of my existence in optimizations: arbitrary thresholds. - It is overly conservative about which constructs can be split and promoted. - The vector value replacement aspect is separated from the splitting logic, missing many opportunities where splitting and vector value formation can work together. - The splitting is entirely based around the underlying type of the alloca, despite this type often having little to do with the reality of how that memory is used. This is especially prevelant with unions and base classes where we tail-pack derived members. - When splitting fails (often due to the thresholds), the vector value replacement (again because it is separate) can kick in for preposterous cases where we simply should have split the value. This results in forming i1024 and i2048 integer "bit vectors" that tremendously slow down subsequnet IR optimizations (due to large APInts) and impede the backend's lowering. The new design takes an approach that fundamentally is not susceptible to many of these problems. It is the result of a discusison between myself and Duncan Sands over IRC about how to premptively avoid these types of problems and how to do SROA in a more principled way. Since then, it has evolved and grown, but this remains an important aspect: it fixes real world problems with the SROA process today. First, the transform of SROA actually has little to do with replacement. It has more to do with splitting. The goal is to take an aggregate alloca and form a composition of scalar allocas which can replace it and will be most suitable to the eventual replacement by scalar SSA values. The actual replacement is performed by mem2reg (and in the future SSAUpdater). The splitting is divided into four phases. The first phase is an analysis of the uses of the alloca. This phase recursively walks uses, building up a dense datastructure representing the ranges of the alloca's memory actually used and checking for uses which inhibit any aspects of the transform such as the escape of a pointer. Once we have a mapping of the ranges of the alloca used by individual operations, we compute a partitioning of the used ranges. Some uses are inherently splittable (such as memcpy and memset), while scalar uses are not splittable. The goal is to build a partitioning that has the minimum number of splits while placing each unsplittable use in its own partition. Overlapping unsplittable uses belong to the same partition. This is the target split of the aggregate alloca, and it maximizes the number of scalar accesses which become accesses to their own alloca and candidates for promotion. Third, we re-walk the uses of the alloca and assign each specific memory access to all the partitions touched so that we have dense use-lists for each partition. Finally, we build a new, smaller alloca for each partition and rewrite each use of that partition to use the new alloca. During this phase the pass will also work very hard to transform uses of an alloca into a form suitable for promotion, including forming vector operations, speculating loads throguh PHI nodes and selects, etc. After splitting is complete, each newly refined alloca that is a candidate for promotion to a scalar SSA value is run through mem2reg. There are lots of reasonably detailed comments in the source code about the design and algorithms, and I'm going to be trying to improve them in subsequent commits to ensure this is well documented, as the new pass is in many ways more complex than the old one. Some of this is still a WIP, but the current state is reasonbly stable. It has passed bootstrap, the nightly test suite, and Duncan has run it successfully through the ACATS and DragonEgg test suites. That said, it remains behind a default-off flag until the last few pieces are in place, and full testing can be done. Specific areas I'm looking at next: - Improved comments and some code cleanup from reviews. - SSAUpdater and enabling this pass inside the CGSCC pass manager. - Some datastructure tuning and compile-time measurements. - More aggressive FCA splitting and vector formation. Many thanks to Duncan Sands for the thorough final review, as well as Benjamin Kramer for lots of review during the process of writing this pass, and Daniel Berlin for reviewing the data structures and algorithms and general theory of the pass. Also, several other people on IRC, over lunch tables, etc for lots of feedback and advice. llvm-svn: 163883
2012-09-14 11:22:59 +02:00
%a0 = getelementptr [2 x i32]* %a, i64 0, i32 0
Refactor the PartitionUse structure to actually use the Use* instead of a pair of instructions, one for the used pointer and the second for the user. This simplifies the representation and also makes it more dense. This was noticed because of the miscompile in PR13926. In that case, we were running up against a fundamental "bad idea" in the speculation of PHI and select instructions: the speculation and rewriting are interleaved, which requires phi speculation to also perform load rewriting! This is bad, and causes us to miss opportunities to do (for example) vector rewriting only exposed after PHI speculation, etc etc. It also, in the old system, required us to insert *new* load uses into the current partition's use list, which would then be ignored during rewriting because we had already extracted an end iterator for the use list. The appending behavior (and much of the other oddities) stem from the strange de-duplication strategy in the PartitionUse builder. Amusingly, all this went without notice for so long because it could only be triggered by having *different* GEPs into the same partition of the same alloca, where both different GEPs were operands of a single PHI, and where the GEP which was not encountered first also had multiple uses within that same PHI node... Hence the insane steps required to reproduce. So, step one in fixing this fundamental bad idea is to make the PartitionUse actually contain a Use*, and to make the builder do proper deduplication instead of funky de-duplication. This is enough to remove the appending behavior, and fix the miscompile in PR13926, but there is more work to be done here. Subsequent commits will lift the speculation into its own visitor. It'll be a useful step toward potentially extracting all of the speculation logic into a generic utility transform. The existing PHI test case for repeated operands has been made more extreme to catch even these issues. This test case, run through the old pass, will exactly reproduce the miscompile from PR13926. ;] We were so close here! llvm-svn: 164925
2012-10-01 03:49:22 +02:00
%a0b = getelementptr [2 x i32]* %a, i64 0, i32 0
Introduce a new SROA implementation. This is essentially a ground up re-think of the SROA pass in LLVM. It was initially inspired by a few problems with the existing pass: - It is subject to the bane of my existence in optimizations: arbitrary thresholds. - It is overly conservative about which constructs can be split and promoted. - The vector value replacement aspect is separated from the splitting logic, missing many opportunities where splitting and vector value formation can work together. - The splitting is entirely based around the underlying type of the alloca, despite this type often having little to do with the reality of how that memory is used. This is especially prevelant with unions and base classes where we tail-pack derived members. - When splitting fails (often due to the thresholds), the vector value replacement (again because it is separate) can kick in for preposterous cases where we simply should have split the value. This results in forming i1024 and i2048 integer "bit vectors" that tremendously slow down subsequnet IR optimizations (due to large APInts) and impede the backend's lowering. The new design takes an approach that fundamentally is not susceptible to many of these problems. It is the result of a discusison between myself and Duncan Sands over IRC about how to premptively avoid these types of problems and how to do SROA in a more principled way. Since then, it has evolved and grown, but this remains an important aspect: it fixes real world problems with the SROA process today. First, the transform of SROA actually has little to do with replacement. It has more to do with splitting. The goal is to take an aggregate alloca and form a composition of scalar allocas which can replace it and will be most suitable to the eventual replacement by scalar SSA values. The actual replacement is performed by mem2reg (and in the future SSAUpdater). The splitting is divided into four phases. The first phase is an analysis of the uses of the alloca. This phase recursively walks uses, building up a dense datastructure representing the ranges of the alloca's memory actually used and checking for uses which inhibit any aspects of the transform such as the escape of a pointer. Once we have a mapping of the ranges of the alloca used by individual operations, we compute a partitioning of the used ranges. Some uses are inherently splittable (such as memcpy and memset), while scalar uses are not splittable. The goal is to build a partitioning that has the minimum number of splits while placing each unsplittable use in its own partition. Overlapping unsplittable uses belong to the same partition. This is the target split of the aggregate alloca, and it maximizes the number of scalar accesses which become accesses to their own alloca and candidates for promotion. Third, we re-walk the uses of the alloca and assign each specific memory access to all the partitions touched so that we have dense use-lists for each partition. Finally, we build a new, smaller alloca for each partition and rewrite each use of that partition to use the new alloca. During this phase the pass will also work very hard to transform uses of an alloca into a form suitable for promotion, including forming vector operations, speculating loads throguh PHI nodes and selects, etc. After splitting is complete, each newly refined alloca that is a candidate for promotion to a scalar SSA value is run through mem2reg. There are lots of reasonably detailed comments in the source code about the design and algorithms, and I'm going to be trying to improve them in subsequent commits to ensure this is well documented, as the new pass is in many ways more complex than the old one. Some of this is still a WIP, but the current state is reasonbly stable. It has passed bootstrap, the nightly test suite, and Duncan has run it successfully through the ACATS and DragonEgg test suites. That said, it remains behind a default-off flag until the last few pieces are in place, and full testing can be done. Specific areas I'm looking at next: - Improved comments and some code cleanup from reviews. - SSAUpdater and enabling this pass inside the CGSCC pass manager. - Some datastructure tuning and compile-time measurements. - More aggressive FCA splitting and vector formation. Many thanks to Duncan Sands for the thorough final review, as well as Benjamin Kramer for lots of review during the process of writing this pass, and Daniel Berlin for reviewing the data structures and algorithms and general theory of the pass. Also, several other people on IRC, over lunch tables, etc for lots of feedback and advice. llvm-svn: 163883
2012-09-14 11:22:59 +02:00
%a1 = getelementptr [2 x i32]* %a, i64 0, i32 1
Refactor the PartitionUse structure to actually use the Use* instead of a pair of instructions, one for the used pointer and the second for the user. This simplifies the representation and also makes it more dense. This was noticed because of the miscompile in PR13926. In that case, we were running up against a fundamental "bad idea" in the speculation of PHI and select instructions: the speculation and rewriting are interleaved, which requires phi speculation to also perform load rewriting! This is bad, and causes us to miss opportunities to do (for example) vector rewriting only exposed after PHI speculation, etc etc. It also, in the old system, required us to insert *new* load uses into the current partition's use list, which would then be ignored during rewriting because we had already extracted an end iterator for the use list. The appending behavior (and much of the other oddities) stem from the strange de-duplication strategy in the PartitionUse builder. Amusingly, all this went without notice for so long because it could only be triggered by having *different* GEPs into the same partition of the same alloca, where both different GEPs were operands of a single PHI, and where the GEP which was not encountered first also had multiple uses within that same PHI node... Hence the insane steps required to reproduce. So, step one in fixing this fundamental bad idea is to make the PartitionUse actually contain a Use*, and to make the builder do proper deduplication instead of funky de-duplication. This is enough to remove the appending behavior, and fix the miscompile in PR13926, but there is more work to be done here. Subsequent commits will lift the speculation into its own visitor. It'll be a useful step toward potentially extracting all of the speculation logic into a generic utility transform. The existing PHI test case for repeated operands has been made more extreme to catch even these issues. This test case, run through the old pass, will exactly reproduce the miscompile from PR13926. ;] We were so close here! llvm-svn: 164925
2012-10-01 03:49:22 +02:00
%a1b = getelementptr [2 x i32]* %a, i64 0, i32 1
Introduce a new SROA implementation. This is essentially a ground up re-think of the SROA pass in LLVM. It was initially inspired by a few problems with the existing pass: - It is subject to the bane of my existence in optimizations: arbitrary thresholds. - It is overly conservative about which constructs can be split and promoted. - The vector value replacement aspect is separated from the splitting logic, missing many opportunities where splitting and vector value formation can work together. - The splitting is entirely based around the underlying type of the alloca, despite this type often having little to do with the reality of how that memory is used. This is especially prevelant with unions and base classes where we tail-pack derived members. - When splitting fails (often due to the thresholds), the vector value replacement (again because it is separate) can kick in for preposterous cases where we simply should have split the value. This results in forming i1024 and i2048 integer "bit vectors" that tremendously slow down subsequnet IR optimizations (due to large APInts) and impede the backend's lowering. The new design takes an approach that fundamentally is not susceptible to many of these problems. It is the result of a discusison between myself and Duncan Sands over IRC about how to premptively avoid these types of problems and how to do SROA in a more principled way. Since then, it has evolved and grown, but this remains an important aspect: it fixes real world problems with the SROA process today. First, the transform of SROA actually has little to do with replacement. It has more to do with splitting. The goal is to take an aggregate alloca and form a composition of scalar allocas which can replace it and will be most suitable to the eventual replacement by scalar SSA values. The actual replacement is performed by mem2reg (and in the future SSAUpdater). The splitting is divided into four phases. The first phase is an analysis of the uses of the alloca. This phase recursively walks uses, building up a dense datastructure representing the ranges of the alloca's memory actually used and checking for uses which inhibit any aspects of the transform such as the escape of a pointer. Once we have a mapping of the ranges of the alloca used by individual operations, we compute a partitioning of the used ranges. Some uses are inherently splittable (such as memcpy and memset), while scalar uses are not splittable. The goal is to build a partitioning that has the minimum number of splits while placing each unsplittable use in its own partition. Overlapping unsplittable uses belong to the same partition. This is the target split of the aggregate alloca, and it maximizes the number of scalar accesses which become accesses to their own alloca and candidates for promotion. Third, we re-walk the uses of the alloca and assign each specific memory access to all the partitions touched so that we have dense use-lists for each partition. Finally, we build a new, smaller alloca for each partition and rewrite each use of that partition to use the new alloca. During this phase the pass will also work very hard to transform uses of an alloca into a form suitable for promotion, including forming vector operations, speculating loads throguh PHI nodes and selects, etc. After splitting is complete, each newly refined alloca that is a candidate for promotion to a scalar SSA value is run through mem2reg. There are lots of reasonably detailed comments in the source code about the design and algorithms, and I'm going to be trying to improve them in subsequent commits to ensure this is well documented, as the new pass is in many ways more complex than the old one. Some of this is still a WIP, but the current state is reasonbly stable. It has passed bootstrap, the nightly test suite, and Duncan has run it successfully through the ACATS and DragonEgg test suites. That said, it remains behind a default-off flag until the last few pieces are in place, and full testing can be done. Specific areas I'm looking at next: - Improved comments and some code cleanup from reviews. - SSAUpdater and enabling this pass inside the CGSCC pass manager. - Some datastructure tuning and compile-time measurements. - More aggressive FCA splitting and vector formation. Many thanks to Duncan Sands for the thorough final review, as well as Benjamin Kramer for lots of review during the process of writing this pass, and Daniel Berlin for reviewing the data structures and algorithms and general theory of the pass. Also, several other people on IRC, over lunch tables, etc for lots of feedback and advice. llvm-svn: 163883
2012-09-14 11:22:59 +02:00
store i32 0, i32* %a0
store i32 1, i32* %a1
; CHECK-NOT: store
switch i32 %x, label %bb0 [ i32 1, label %bb1
i32 2, label %bb2
Refactor the PartitionUse structure to actually use the Use* instead of a pair of instructions, one for the used pointer and the second for the user. This simplifies the representation and also makes it more dense. This was noticed because of the miscompile in PR13926. In that case, we were running up against a fundamental "bad idea" in the speculation of PHI and select instructions: the speculation and rewriting are interleaved, which requires phi speculation to also perform load rewriting! This is bad, and causes us to miss opportunities to do (for example) vector rewriting only exposed after PHI speculation, etc etc. It also, in the old system, required us to insert *new* load uses into the current partition's use list, which would then be ignored during rewriting because we had already extracted an end iterator for the use list. The appending behavior (and much of the other oddities) stem from the strange de-duplication strategy in the PartitionUse builder. Amusingly, all this went without notice for so long because it could only be triggered by having *different* GEPs into the same partition of the same alloca, where both different GEPs were operands of a single PHI, and where the GEP which was not encountered first also had multiple uses within that same PHI node... Hence the insane steps required to reproduce. So, step one in fixing this fundamental bad idea is to make the PartitionUse actually contain a Use*, and to make the builder do proper deduplication instead of funky de-duplication. This is enough to remove the appending behavior, and fix the miscompile in PR13926, but there is more work to be done here. Subsequent commits will lift the speculation into its own visitor. It'll be a useful step toward potentially extracting all of the speculation logic into a generic utility transform. The existing PHI test case for repeated operands has been made more extreme to catch even these issues. This test case, run through the old pass, will exactly reproduce the miscompile from PR13926. ;] We were so close here! llvm-svn: 164925
2012-10-01 03:49:22 +02:00
i32 3, label %bb3
i32 4, label %bb4
i32 5, label %bb5
i32 6, label %bb6
i32 7, label %bb7 ]
Introduce a new SROA implementation. This is essentially a ground up re-think of the SROA pass in LLVM. It was initially inspired by a few problems with the existing pass: - It is subject to the bane of my existence in optimizations: arbitrary thresholds. - It is overly conservative about which constructs can be split and promoted. - The vector value replacement aspect is separated from the splitting logic, missing many opportunities where splitting and vector value formation can work together. - The splitting is entirely based around the underlying type of the alloca, despite this type often having little to do with the reality of how that memory is used. This is especially prevelant with unions and base classes where we tail-pack derived members. - When splitting fails (often due to the thresholds), the vector value replacement (again because it is separate) can kick in for preposterous cases where we simply should have split the value. This results in forming i1024 and i2048 integer "bit vectors" that tremendously slow down subsequnet IR optimizations (due to large APInts) and impede the backend's lowering. The new design takes an approach that fundamentally is not susceptible to many of these problems. It is the result of a discusison between myself and Duncan Sands over IRC about how to premptively avoid these types of problems and how to do SROA in a more principled way. Since then, it has evolved and grown, but this remains an important aspect: it fixes real world problems with the SROA process today. First, the transform of SROA actually has little to do with replacement. It has more to do with splitting. The goal is to take an aggregate alloca and form a composition of scalar allocas which can replace it and will be most suitable to the eventual replacement by scalar SSA values. The actual replacement is performed by mem2reg (and in the future SSAUpdater). The splitting is divided into four phases. The first phase is an analysis of the uses of the alloca. This phase recursively walks uses, building up a dense datastructure representing the ranges of the alloca's memory actually used and checking for uses which inhibit any aspects of the transform such as the escape of a pointer. Once we have a mapping of the ranges of the alloca used by individual operations, we compute a partitioning of the used ranges. Some uses are inherently splittable (such as memcpy and memset), while scalar uses are not splittable. The goal is to build a partitioning that has the minimum number of splits while placing each unsplittable use in its own partition. Overlapping unsplittable uses belong to the same partition. This is the target split of the aggregate alloca, and it maximizes the number of scalar accesses which become accesses to their own alloca and candidates for promotion. Third, we re-walk the uses of the alloca and assign each specific memory access to all the partitions touched so that we have dense use-lists for each partition. Finally, we build a new, smaller alloca for each partition and rewrite each use of that partition to use the new alloca. During this phase the pass will also work very hard to transform uses of an alloca into a form suitable for promotion, including forming vector operations, speculating loads throguh PHI nodes and selects, etc. After splitting is complete, each newly refined alloca that is a candidate for promotion to a scalar SSA value is run through mem2reg. There are lots of reasonably detailed comments in the source code about the design and algorithms, and I'm going to be trying to improve them in subsequent commits to ensure this is well documented, as the new pass is in many ways more complex than the old one. Some of this is still a WIP, but the current state is reasonbly stable. It has passed bootstrap, the nightly test suite, and Duncan has run it successfully through the ACATS and DragonEgg test suites. That said, it remains behind a default-off flag until the last few pieces are in place, and full testing can be done. Specific areas I'm looking at next: - Improved comments and some code cleanup from reviews. - SSAUpdater and enabling this pass inside the CGSCC pass manager. - Some datastructure tuning and compile-time measurements. - More aggressive FCA splitting and vector formation. Many thanks to Duncan Sands for the thorough final review, as well as Benjamin Kramer for lots of review during the process of writing this pass, and Daniel Berlin for reviewing the data structures and algorithms and general theory of the pass. Also, several other people on IRC, over lunch tables, etc for lots of feedback and advice. llvm-svn: 163883
2012-09-14 11:22:59 +02:00
bb0:
br label %exit
bb1:
br label %exit
bb2:
br label %exit
bb3:
br label %exit
Refactor the PartitionUse structure to actually use the Use* instead of a pair of instructions, one for the used pointer and the second for the user. This simplifies the representation and also makes it more dense. This was noticed because of the miscompile in PR13926. In that case, we were running up against a fundamental "bad idea" in the speculation of PHI and select instructions: the speculation and rewriting are interleaved, which requires phi speculation to also perform load rewriting! This is bad, and causes us to miss opportunities to do (for example) vector rewriting only exposed after PHI speculation, etc etc. It also, in the old system, required us to insert *new* load uses into the current partition's use list, which would then be ignored during rewriting because we had already extracted an end iterator for the use list. The appending behavior (and much of the other oddities) stem from the strange de-duplication strategy in the PartitionUse builder. Amusingly, all this went without notice for so long because it could only be triggered by having *different* GEPs into the same partition of the same alloca, where both different GEPs were operands of a single PHI, and where the GEP which was not encountered first also had multiple uses within that same PHI node... Hence the insane steps required to reproduce. So, step one in fixing this fundamental bad idea is to make the PartitionUse actually contain a Use*, and to make the builder do proper deduplication instead of funky de-duplication. This is enough to remove the appending behavior, and fix the miscompile in PR13926, but there is more work to be done here. Subsequent commits will lift the speculation into its own visitor. It'll be a useful step toward potentially extracting all of the speculation logic into a generic utility transform. The existing PHI test case for repeated operands has been made more extreme to catch even these issues. This test case, run through the old pass, will exactly reproduce the miscompile from PR13926. ;] We were so close here! llvm-svn: 164925
2012-10-01 03:49:22 +02:00
bb4:
br label %exit
bb5:
br label %exit
bb6:
br label %exit
bb7:
br label %exit
Introduce a new SROA implementation. This is essentially a ground up re-think of the SROA pass in LLVM. It was initially inspired by a few problems with the existing pass: - It is subject to the bane of my existence in optimizations: arbitrary thresholds. - It is overly conservative about which constructs can be split and promoted. - The vector value replacement aspect is separated from the splitting logic, missing many opportunities where splitting and vector value formation can work together. - The splitting is entirely based around the underlying type of the alloca, despite this type often having little to do with the reality of how that memory is used. This is especially prevelant with unions and base classes where we tail-pack derived members. - When splitting fails (often due to the thresholds), the vector value replacement (again because it is separate) can kick in for preposterous cases where we simply should have split the value. This results in forming i1024 and i2048 integer "bit vectors" that tremendously slow down subsequnet IR optimizations (due to large APInts) and impede the backend's lowering. The new design takes an approach that fundamentally is not susceptible to many of these problems. It is the result of a discusison between myself and Duncan Sands over IRC about how to premptively avoid these types of problems and how to do SROA in a more principled way. Since then, it has evolved and grown, but this remains an important aspect: it fixes real world problems with the SROA process today. First, the transform of SROA actually has little to do with replacement. It has more to do with splitting. The goal is to take an aggregate alloca and form a composition of scalar allocas which can replace it and will be most suitable to the eventual replacement by scalar SSA values. The actual replacement is performed by mem2reg (and in the future SSAUpdater). The splitting is divided into four phases. The first phase is an analysis of the uses of the alloca. This phase recursively walks uses, building up a dense datastructure representing the ranges of the alloca's memory actually used and checking for uses which inhibit any aspects of the transform such as the escape of a pointer. Once we have a mapping of the ranges of the alloca used by individual operations, we compute a partitioning of the used ranges. Some uses are inherently splittable (such as memcpy and memset), while scalar uses are not splittable. The goal is to build a partitioning that has the minimum number of splits while placing each unsplittable use in its own partition. Overlapping unsplittable uses belong to the same partition. This is the target split of the aggregate alloca, and it maximizes the number of scalar accesses which become accesses to their own alloca and candidates for promotion. Third, we re-walk the uses of the alloca and assign each specific memory access to all the partitions touched so that we have dense use-lists for each partition. Finally, we build a new, smaller alloca for each partition and rewrite each use of that partition to use the new alloca. During this phase the pass will also work very hard to transform uses of an alloca into a form suitable for promotion, including forming vector operations, speculating loads throguh PHI nodes and selects, etc. After splitting is complete, each newly refined alloca that is a candidate for promotion to a scalar SSA value is run through mem2reg. There are lots of reasonably detailed comments in the source code about the design and algorithms, and I'm going to be trying to improve them in subsequent commits to ensure this is well documented, as the new pass is in many ways more complex than the old one. Some of this is still a WIP, but the current state is reasonbly stable. It has passed bootstrap, the nightly test suite, and Duncan has run it successfully through the ACATS and DragonEgg test suites. That said, it remains behind a default-off flag until the last few pieces are in place, and full testing can be done. Specific areas I'm looking at next: - Improved comments and some code cleanup from reviews. - SSAUpdater and enabling this pass inside the CGSCC pass manager. - Some datastructure tuning and compile-time measurements. - More aggressive FCA splitting and vector formation. Many thanks to Duncan Sands for the thorough final review, as well as Benjamin Kramer for lots of review during the process of writing this pass, and Daniel Berlin for reviewing the data structures and algorithms and general theory of the pass. Also, several other people on IRC, over lunch tables, etc for lots of feedback and advice. llvm-svn: 163883
2012-09-14 11:22:59 +02:00
exit:
Refactor the PartitionUse structure to actually use the Use* instead of a pair of instructions, one for the used pointer and the second for the user. This simplifies the representation and also makes it more dense. This was noticed because of the miscompile in PR13926. In that case, we were running up against a fundamental "bad idea" in the speculation of PHI and select instructions: the speculation and rewriting are interleaved, which requires phi speculation to also perform load rewriting! This is bad, and causes us to miss opportunities to do (for example) vector rewriting only exposed after PHI speculation, etc etc. It also, in the old system, required us to insert *new* load uses into the current partition's use list, which would then be ignored during rewriting because we had already extracted an end iterator for the use list. The appending behavior (and much of the other oddities) stem from the strange de-duplication strategy in the PartitionUse builder. Amusingly, all this went without notice for so long because it could only be triggered by having *different* GEPs into the same partition of the same alloca, where both different GEPs were operands of a single PHI, and where the GEP which was not encountered first also had multiple uses within that same PHI node... Hence the insane steps required to reproduce. So, step one in fixing this fundamental bad idea is to make the PartitionUse actually contain a Use*, and to make the builder do proper deduplication instead of funky de-duplication. This is enough to remove the appending behavior, and fix the miscompile in PR13926, but there is more work to be done here. Subsequent commits will lift the speculation into its own visitor. It'll be a useful step toward potentially extracting all of the speculation logic into a generic utility transform. The existing PHI test case for repeated operands has been made more extreme to catch even these issues. This test case, run through the old pass, will exactly reproduce the miscompile from PR13926. ;] We were so close here! llvm-svn: 164925
2012-10-01 03:49:22 +02:00
%phi = phi i32* [ %a1, %bb0 ], [ %a0, %bb1 ], [ %a0, %bb2 ], [ %a1, %bb3 ],
[ %a1b, %bb4 ], [ %a0b, %bb5 ], [ %a0b, %bb6 ], [ %a1b, %bb7 ]
; CHECK: phi i32 [ 1, %{{.*}} ], [ 0, %{{.*}} ], [ 0, %{{.*}} ], [ 1, %{{.*}} ], [ 1, %{{.*}} ], [ 0, %{{.*}} ], [ 0, %{{.*}} ], [ 1, %{{.*}} ]
Introduce a new SROA implementation. This is essentially a ground up re-think of the SROA pass in LLVM. It was initially inspired by a few problems with the existing pass: - It is subject to the bane of my existence in optimizations: arbitrary thresholds. - It is overly conservative about which constructs can be split and promoted. - The vector value replacement aspect is separated from the splitting logic, missing many opportunities where splitting and vector value formation can work together. - The splitting is entirely based around the underlying type of the alloca, despite this type often having little to do with the reality of how that memory is used. This is especially prevelant with unions and base classes where we tail-pack derived members. - When splitting fails (often due to the thresholds), the vector value replacement (again because it is separate) can kick in for preposterous cases where we simply should have split the value. This results in forming i1024 and i2048 integer "bit vectors" that tremendously slow down subsequnet IR optimizations (due to large APInts) and impede the backend's lowering. The new design takes an approach that fundamentally is not susceptible to many of these problems. It is the result of a discusison between myself and Duncan Sands over IRC about how to premptively avoid these types of problems and how to do SROA in a more principled way. Since then, it has evolved and grown, but this remains an important aspect: it fixes real world problems with the SROA process today. First, the transform of SROA actually has little to do with replacement. It has more to do with splitting. The goal is to take an aggregate alloca and form a composition of scalar allocas which can replace it and will be most suitable to the eventual replacement by scalar SSA values. The actual replacement is performed by mem2reg (and in the future SSAUpdater). The splitting is divided into four phases. The first phase is an analysis of the uses of the alloca. This phase recursively walks uses, building up a dense datastructure representing the ranges of the alloca's memory actually used and checking for uses which inhibit any aspects of the transform such as the escape of a pointer. Once we have a mapping of the ranges of the alloca used by individual operations, we compute a partitioning of the used ranges. Some uses are inherently splittable (such as memcpy and memset), while scalar uses are not splittable. The goal is to build a partitioning that has the minimum number of splits while placing each unsplittable use in its own partition. Overlapping unsplittable uses belong to the same partition. This is the target split of the aggregate alloca, and it maximizes the number of scalar accesses which become accesses to their own alloca and candidates for promotion. Third, we re-walk the uses of the alloca and assign each specific memory access to all the partitions touched so that we have dense use-lists for each partition. Finally, we build a new, smaller alloca for each partition and rewrite each use of that partition to use the new alloca. During this phase the pass will also work very hard to transform uses of an alloca into a form suitable for promotion, including forming vector operations, speculating loads throguh PHI nodes and selects, etc. After splitting is complete, each newly refined alloca that is a candidate for promotion to a scalar SSA value is run through mem2reg. There are lots of reasonably detailed comments in the source code about the design and algorithms, and I'm going to be trying to improve them in subsequent commits to ensure this is well documented, as the new pass is in many ways more complex than the old one. Some of this is still a WIP, but the current state is reasonbly stable. It has passed bootstrap, the nightly test suite, and Duncan has run it successfully through the ACATS and DragonEgg test suites. That said, it remains behind a default-off flag until the last few pieces are in place, and full testing can be done. Specific areas I'm looking at next: - Improved comments and some code cleanup from reviews. - SSAUpdater and enabling this pass inside the CGSCC pass manager. - Some datastructure tuning and compile-time measurements. - More aggressive FCA splitting and vector formation. Many thanks to Duncan Sands for the thorough final review, as well as Benjamin Kramer for lots of review during the process of writing this pass, and Daniel Berlin for reviewing the data structures and algorithms and general theory of the pass. Also, several other people on IRC, over lunch tables, etc for lots of feedback and advice. llvm-svn: 163883
2012-09-14 11:22:59 +02:00
%result = load i32* %phi
ret i32 %result
}
define i32 @test4() {
Update Transforms tests to use CHECK-LABEL for easier debugging. No functionality change. This update was done with the following bash script: find test/Transforms -name "*.ll" | \ while read NAME; do echo "$NAME" if ! grep -q "^; *RUN: *llc" $NAME; then TEMP=`mktemp -t temp` cp $NAME $TEMP sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \ while read FUNC; do sed -i '' "s/;\(.*\)\([A-Za-z0-9_]*\):\( *\)@$FUNC\([( ]*\)\$/;\1\2-LABEL:\3@$FUNC(/g" $TEMP done mv $TEMP $NAME fi done llvm-svn: 186268
2013-07-14 03:42:54 +02:00
; CHECK-LABEL: @test4(
Introduce a new SROA implementation. This is essentially a ground up re-think of the SROA pass in LLVM. It was initially inspired by a few problems with the existing pass: - It is subject to the bane of my existence in optimizations: arbitrary thresholds. - It is overly conservative about which constructs can be split and promoted. - The vector value replacement aspect is separated from the splitting logic, missing many opportunities where splitting and vector value formation can work together. - The splitting is entirely based around the underlying type of the alloca, despite this type often having little to do with the reality of how that memory is used. This is especially prevelant with unions and base classes where we tail-pack derived members. - When splitting fails (often due to the thresholds), the vector value replacement (again because it is separate) can kick in for preposterous cases where we simply should have split the value. This results in forming i1024 and i2048 integer "bit vectors" that tremendously slow down subsequnet IR optimizations (due to large APInts) and impede the backend's lowering. The new design takes an approach that fundamentally is not susceptible to many of these problems. It is the result of a discusison between myself and Duncan Sands over IRC about how to premptively avoid these types of problems and how to do SROA in a more principled way. Since then, it has evolved and grown, but this remains an important aspect: it fixes real world problems with the SROA process today. First, the transform of SROA actually has little to do with replacement. It has more to do with splitting. The goal is to take an aggregate alloca and form a composition of scalar allocas which can replace it and will be most suitable to the eventual replacement by scalar SSA values. The actual replacement is performed by mem2reg (and in the future SSAUpdater). The splitting is divided into four phases. The first phase is an analysis of the uses of the alloca. This phase recursively walks uses, building up a dense datastructure representing the ranges of the alloca's memory actually used and checking for uses which inhibit any aspects of the transform such as the escape of a pointer. Once we have a mapping of the ranges of the alloca used by individual operations, we compute a partitioning of the used ranges. Some uses are inherently splittable (such as memcpy and memset), while scalar uses are not splittable. The goal is to build a partitioning that has the minimum number of splits while placing each unsplittable use in its own partition. Overlapping unsplittable uses belong to the same partition. This is the target split of the aggregate alloca, and it maximizes the number of scalar accesses which become accesses to their own alloca and candidates for promotion. Third, we re-walk the uses of the alloca and assign each specific memory access to all the partitions touched so that we have dense use-lists for each partition. Finally, we build a new, smaller alloca for each partition and rewrite each use of that partition to use the new alloca. During this phase the pass will also work very hard to transform uses of an alloca into a form suitable for promotion, including forming vector operations, speculating loads throguh PHI nodes and selects, etc. After splitting is complete, each newly refined alloca that is a candidate for promotion to a scalar SSA value is run through mem2reg. There are lots of reasonably detailed comments in the source code about the design and algorithms, and I'm going to be trying to improve them in subsequent commits to ensure this is well documented, as the new pass is in many ways more complex than the old one. Some of this is still a WIP, but the current state is reasonbly stable. It has passed bootstrap, the nightly test suite, and Duncan has run it successfully through the ACATS and DragonEgg test suites. That said, it remains behind a default-off flag until the last few pieces are in place, and full testing can be done. Specific areas I'm looking at next: - Improved comments and some code cleanup from reviews. - SSAUpdater and enabling this pass inside the CGSCC pass manager. - Some datastructure tuning and compile-time measurements. - More aggressive FCA splitting and vector formation. Many thanks to Duncan Sands for the thorough final review, as well as Benjamin Kramer for lots of review during the process of writing this pass, and Daniel Berlin for reviewing the data structures and algorithms and general theory of the pass. Also, several other people on IRC, over lunch tables, etc for lots of feedback and advice. llvm-svn: 163883
2012-09-14 11:22:59 +02:00
entry:
%a = alloca [2 x i32]
; CHECK-NOT: alloca
%a0 = getelementptr [2 x i32]* %a, i64 0, i32 0
%a1 = getelementptr [2 x i32]* %a, i64 0, i32 1
store i32 0, i32* %a0
store i32 1, i32* %a1
%v0 = load i32* %a0
%v1 = load i32* %a1
; CHECK-NOT: store
; CHECK-NOT: load
%cond = icmp sle i32 %v0, %v1
%select = select i1 %cond, i32* %a0, i32* %a0
; CHECK-NOT: select
%result = load i32* %select
ret i32 %result
; CHECK: ret i32 0
}
define i32 @test5(i32* %b) {
Update Transforms tests to use CHECK-LABEL for easier debugging. No functionality change. This update was done with the following bash script: find test/Transforms -name "*.ll" | \ while read NAME; do echo "$NAME" if ! grep -q "^; *RUN: *llc" $NAME; then TEMP=`mktemp -t temp` cp $NAME $TEMP sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \ while read FUNC; do sed -i '' "s/;\(.*\)\([A-Za-z0-9_]*\):\( *\)@$FUNC\([( ]*\)\$/;\1\2-LABEL:\3@$FUNC(/g" $TEMP done mv $TEMP $NAME fi done llvm-svn: 186268
2013-07-14 03:42:54 +02:00
; CHECK-LABEL: @test5(
Introduce a new SROA implementation. This is essentially a ground up re-think of the SROA pass in LLVM. It was initially inspired by a few problems with the existing pass: - It is subject to the bane of my existence in optimizations: arbitrary thresholds. - It is overly conservative about which constructs can be split and promoted. - The vector value replacement aspect is separated from the splitting logic, missing many opportunities where splitting and vector value formation can work together. - The splitting is entirely based around the underlying type of the alloca, despite this type often having little to do with the reality of how that memory is used. This is especially prevelant with unions and base classes where we tail-pack derived members. - When splitting fails (often due to the thresholds), the vector value replacement (again because it is separate) can kick in for preposterous cases where we simply should have split the value. This results in forming i1024 and i2048 integer "bit vectors" that tremendously slow down subsequnet IR optimizations (due to large APInts) and impede the backend's lowering. The new design takes an approach that fundamentally is not susceptible to many of these problems. It is the result of a discusison between myself and Duncan Sands over IRC about how to premptively avoid these types of problems and how to do SROA in a more principled way. Since then, it has evolved and grown, but this remains an important aspect: it fixes real world problems with the SROA process today. First, the transform of SROA actually has little to do with replacement. It has more to do with splitting. The goal is to take an aggregate alloca and form a composition of scalar allocas which can replace it and will be most suitable to the eventual replacement by scalar SSA values. The actual replacement is performed by mem2reg (and in the future SSAUpdater). The splitting is divided into four phases. The first phase is an analysis of the uses of the alloca. This phase recursively walks uses, building up a dense datastructure representing the ranges of the alloca's memory actually used and checking for uses which inhibit any aspects of the transform such as the escape of a pointer. Once we have a mapping of the ranges of the alloca used by individual operations, we compute a partitioning of the used ranges. Some uses are inherently splittable (such as memcpy and memset), while scalar uses are not splittable. The goal is to build a partitioning that has the minimum number of splits while placing each unsplittable use in its own partition. Overlapping unsplittable uses belong to the same partition. This is the target split of the aggregate alloca, and it maximizes the number of scalar accesses which become accesses to their own alloca and candidates for promotion. Third, we re-walk the uses of the alloca and assign each specific memory access to all the partitions touched so that we have dense use-lists for each partition. Finally, we build a new, smaller alloca for each partition and rewrite each use of that partition to use the new alloca. During this phase the pass will also work very hard to transform uses of an alloca into a form suitable for promotion, including forming vector operations, speculating loads throguh PHI nodes and selects, etc. After splitting is complete, each newly refined alloca that is a candidate for promotion to a scalar SSA value is run through mem2reg. There are lots of reasonably detailed comments in the source code about the design and algorithms, and I'm going to be trying to improve them in subsequent commits to ensure this is well documented, as the new pass is in many ways more complex than the old one. Some of this is still a WIP, but the current state is reasonbly stable. It has passed bootstrap, the nightly test suite, and Duncan has run it successfully through the ACATS and DragonEgg test suites. That said, it remains behind a default-off flag until the last few pieces are in place, and full testing can be done. Specific areas I'm looking at next: - Improved comments and some code cleanup from reviews. - SSAUpdater and enabling this pass inside the CGSCC pass manager. - Some datastructure tuning and compile-time measurements. - More aggressive FCA splitting and vector formation. Many thanks to Duncan Sands for the thorough final review, as well as Benjamin Kramer for lots of review during the process of writing this pass, and Daniel Berlin for reviewing the data structures and algorithms and general theory of the pass. Also, several other people on IRC, over lunch tables, etc for lots of feedback and advice. llvm-svn: 163883
2012-09-14 11:22:59 +02:00
entry:
%a = alloca [2 x i32]
; CHECK-NOT: alloca
%a1 = getelementptr [2 x i32]* %a, i64 0, i32 1
store i32 1, i32* %a1
; CHECK-NOT: store
%select = select i1 true, i32* %a1, i32* %b
; CHECK-NOT: select
%result = load i32* %select
; CHECK-NOT: load
ret i32 %result
; CHECK: ret i32 1
}
Fix a case where the new SROA pass failed to zap dead operands to selects with a constant condition. This resulted in the operands remaining live through the SROA rewriter. Most of the time, this just caused some dead allocas to persist and get zapped by later passes, but in one case found by Joerg, it caused a crash when we tried to *promote* the alloca despite it having this dead use. We already have the mechanisms in place to handle this, just wire select up to them. llvm-svn: 164427
2012-09-22 01:36:40 +02:00
declare void @f(i32*, i32*)
Introduce a new SROA implementation. This is essentially a ground up re-think of the SROA pass in LLVM. It was initially inspired by a few problems with the existing pass: - It is subject to the bane of my existence in optimizations: arbitrary thresholds. - It is overly conservative about which constructs can be split and promoted. - The vector value replacement aspect is separated from the splitting logic, missing many opportunities where splitting and vector value formation can work together. - The splitting is entirely based around the underlying type of the alloca, despite this type often having little to do with the reality of how that memory is used. This is especially prevelant with unions and base classes where we tail-pack derived members. - When splitting fails (often due to the thresholds), the vector value replacement (again because it is separate) can kick in for preposterous cases where we simply should have split the value. This results in forming i1024 and i2048 integer "bit vectors" that tremendously slow down subsequnet IR optimizations (due to large APInts) and impede the backend's lowering. The new design takes an approach that fundamentally is not susceptible to many of these problems. It is the result of a discusison between myself and Duncan Sands over IRC about how to premptively avoid these types of problems and how to do SROA in a more principled way. Since then, it has evolved and grown, but this remains an important aspect: it fixes real world problems with the SROA process today. First, the transform of SROA actually has little to do with replacement. It has more to do with splitting. The goal is to take an aggregate alloca and form a composition of scalar allocas which can replace it and will be most suitable to the eventual replacement by scalar SSA values. The actual replacement is performed by mem2reg (and in the future SSAUpdater). The splitting is divided into four phases. The first phase is an analysis of the uses of the alloca. This phase recursively walks uses, building up a dense datastructure representing the ranges of the alloca's memory actually used and checking for uses which inhibit any aspects of the transform such as the escape of a pointer. Once we have a mapping of the ranges of the alloca used by individual operations, we compute a partitioning of the used ranges. Some uses are inherently splittable (such as memcpy and memset), while scalar uses are not splittable. The goal is to build a partitioning that has the minimum number of splits while placing each unsplittable use in its own partition. Overlapping unsplittable uses belong to the same partition. This is the target split of the aggregate alloca, and it maximizes the number of scalar accesses which become accesses to their own alloca and candidates for promotion. Third, we re-walk the uses of the alloca and assign each specific memory access to all the partitions touched so that we have dense use-lists for each partition. Finally, we build a new, smaller alloca for each partition and rewrite each use of that partition to use the new alloca. During this phase the pass will also work very hard to transform uses of an alloca into a form suitable for promotion, including forming vector operations, speculating loads throguh PHI nodes and selects, etc. After splitting is complete, each newly refined alloca that is a candidate for promotion to a scalar SSA value is run through mem2reg. There are lots of reasonably detailed comments in the source code about the design and algorithms, and I'm going to be trying to improve them in subsequent commits to ensure this is well documented, as the new pass is in many ways more complex than the old one. Some of this is still a WIP, but the current state is reasonbly stable. It has passed bootstrap, the nightly test suite, and Duncan has run it successfully through the ACATS and DragonEgg test suites. That said, it remains behind a default-off flag until the last few pieces are in place, and full testing can be done. Specific areas I'm looking at next: - Improved comments and some code cleanup from reviews. - SSAUpdater and enabling this pass inside the CGSCC pass manager. - Some datastructure tuning and compile-time measurements. - More aggressive FCA splitting and vector formation. Many thanks to Duncan Sands for the thorough final review, as well as Benjamin Kramer for lots of review during the process of writing this pass, and Daniel Berlin for reviewing the data structures and algorithms and general theory of the pass. Also, several other people on IRC, over lunch tables, etc for lots of feedback and advice. llvm-svn: 163883
2012-09-14 11:22:59 +02:00
define i32 @test6(i32* %b) {
Update Transforms tests to use CHECK-LABEL for easier debugging. No functionality change. This update was done with the following bash script: find test/Transforms -name "*.ll" | \ while read NAME; do echo "$NAME" if ! grep -q "^; *RUN: *llc" $NAME; then TEMP=`mktemp -t temp` cp $NAME $TEMP sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \ while read FUNC; do sed -i '' "s/;\(.*\)\([A-Za-z0-9_]*\):\( *\)@$FUNC\([( ]*\)\$/;\1\2-LABEL:\3@$FUNC(/g" $TEMP done mv $TEMP $NAME fi done llvm-svn: 186268
2013-07-14 03:42:54 +02:00
; CHECK-LABEL: @test6(
Introduce a new SROA implementation. This is essentially a ground up re-think of the SROA pass in LLVM. It was initially inspired by a few problems with the existing pass: - It is subject to the bane of my existence in optimizations: arbitrary thresholds. - It is overly conservative about which constructs can be split and promoted. - The vector value replacement aspect is separated from the splitting logic, missing many opportunities where splitting and vector value formation can work together. - The splitting is entirely based around the underlying type of the alloca, despite this type often having little to do with the reality of how that memory is used. This is especially prevelant with unions and base classes where we tail-pack derived members. - When splitting fails (often due to the thresholds), the vector value replacement (again because it is separate) can kick in for preposterous cases where we simply should have split the value. This results in forming i1024 and i2048 integer "bit vectors" that tremendously slow down subsequnet IR optimizations (due to large APInts) and impede the backend's lowering. The new design takes an approach that fundamentally is not susceptible to many of these problems. It is the result of a discusison between myself and Duncan Sands over IRC about how to premptively avoid these types of problems and how to do SROA in a more principled way. Since then, it has evolved and grown, but this remains an important aspect: it fixes real world problems with the SROA process today. First, the transform of SROA actually has little to do with replacement. It has more to do with splitting. The goal is to take an aggregate alloca and form a composition of scalar allocas which can replace it and will be most suitable to the eventual replacement by scalar SSA values. The actual replacement is performed by mem2reg (and in the future SSAUpdater). The splitting is divided into four phases. The first phase is an analysis of the uses of the alloca. This phase recursively walks uses, building up a dense datastructure representing the ranges of the alloca's memory actually used and checking for uses which inhibit any aspects of the transform such as the escape of a pointer. Once we have a mapping of the ranges of the alloca used by individual operations, we compute a partitioning of the used ranges. Some uses are inherently splittable (such as memcpy and memset), while scalar uses are not splittable. The goal is to build a partitioning that has the minimum number of splits while placing each unsplittable use in its own partition. Overlapping unsplittable uses belong to the same partition. This is the target split of the aggregate alloca, and it maximizes the number of scalar accesses which become accesses to their own alloca and candidates for promotion. Third, we re-walk the uses of the alloca and assign each specific memory access to all the partitions touched so that we have dense use-lists for each partition. Finally, we build a new, smaller alloca for each partition and rewrite each use of that partition to use the new alloca. During this phase the pass will also work very hard to transform uses of an alloca into a form suitable for promotion, including forming vector operations, speculating loads throguh PHI nodes and selects, etc. After splitting is complete, each newly refined alloca that is a candidate for promotion to a scalar SSA value is run through mem2reg. There are lots of reasonably detailed comments in the source code about the design and algorithms, and I'm going to be trying to improve them in subsequent commits to ensure this is well documented, as the new pass is in many ways more complex than the old one. Some of this is still a WIP, but the current state is reasonbly stable. It has passed bootstrap, the nightly test suite, and Duncan has run it successfully through the ACATS and DragonEgg test suites. That said, it remains behind a default-off flag until the last few pieces are in place, and full testing can be done. Specific areas I'm looking at next: - Improved comments and some code cleanup from reviews. - SSAUpdater and enabling this pass inside the CGSCC pass manager. - Some datastructure tuning and compile-time measurements. - More aggressive FCA splitting and vector formation. Many thanks to Duncan Sands for the thorough final review, as well as Benjamin Kramer for lots of review during the process of writing this pass, and Daniel Berlin for reviewing the data structures and algorithms and general theory of the pass. Also, several other people on IRC, over lunch tables, etc for lots of feedback and advice. llvm-svn: 163883
2012-09-14 11:22:59 +02:00
entry:
%a = alloca [2 x i32]
Fix a case where the new SROA pass failed to zap dead operands to selects with a constant condition. This resulted in the operands remaining live through the SROA rewriter. Most of the time, this just caused some dead allocas to persist and get zapped by later passes, but in one case found by Joerg, it caused a crash when we tried to *promote* the alloca despite it having this dead use. We already have the mechanisms in place to handle this, just wire select up to them. llvm-svn: 164427
2012-09-22 01:36:40 +02:00
%c = alloca i32
; CHECK-NOT: alloca
Introduce a new SROA implementation. This is essentially a ground up re-think of the SROA pass in LLVM. It was initially inspired by a few problems with the existing pass: - It is subject to the bane of my existence in optimizations: arbitrary thresholds. - It is overly conservative about which constructs can be split and promoted. - The vector value replacement aspect is separated from the splitting logic, missing many opportunities where splitting and vector value formation can work together. - The splitting is entirely based around the underlying type of the alloca, despite this type often having little to do with the reality of how that memory is used. This is especially prevelant with unions and base classes where we tail-pack derived members. - When splitting fails (often due to the thresholds), the vector value replacement (again because it is separate) can kick in for preposterous cases where we simply should have split the value. This results in forming i1024 and i2048 integer "bit vectors" that tremendously slow down subsequnet IR optimizations (due to large APInts) and impede the backend's lowering. The new design takes an approach that fundamentally is not susceptible to many of these problems. It is the result of a discusison between myself and Duncan Sands over IRC about how to premptively avoid these types of problems and how to do SROA in a more principled way. Since then, it has evolved and grown, but this remains an important aspect: it fixes real world problems with the SROA process today. First, the transform of SROA actually has little to do with replacement. It has more to do with splitting. The goal is to take an aggregate alloca and form a composition of scalar allocas which can replace it and will be most suitable to the eventual replacement by scalar SSA values. The actual replacement is performed by mem2reg (and in the future SSAUpdater). The splitting is divided into four phases. The first phase is an analysis of the uses of the alloca. This phase recursively walks uses, building up a dense datastructure representing the ranges of the alloca's memory actually used and checking for uses which inhibit any aspects of the transform such as the escape of a pointer. Once we have a mapping of the ranges of the alloca used by individual operations, we compute a partitioning of the used ranges. Some uses are inherently splittable (such as memcpy and memset), while scalar uses are not splittable. The goal is to build a partitioning that has the minimum number of splits while placing each unsplittable use in its own partition. Overlapping unsplittable uses belong to the same partition. This is the target split of the aggregate alloca, and it maximizes the number of scalar accesses which become accesses to their own alloca and candidates for promotion. Third, we re-walk the uses of the alloca and assign each specific memory access to all the partitions touched so that we have dense use-lists for each partition. Finally, we build a new, smaller alloca for each partition and rewrite each use of that partition to use the new alloca. During this phase the pass will also work very hard to transform uses of an alloca into a form suitable for promotion, including forming vector operations, speculating loads throguh PHI nodes and selects, etc. After splitting is complete, each newly refined alloca that is a candidate for promotion to a scalar SSA value is run through mem2reg. There are lots of reasonably detailed comments in the source code about the design and algorithms, and I'm going to be trying to improve them in subsequent commits to ensure this is well documented, as the new pass is in many ways more complex than the old one. Some of this is still a WIP, but the current state is reasonbly stable. It has passed bootstrap, the nightly test suite, and Duncan has run it successfully through the ACATS and DragonEgg test suites. That said, it remains behind a default-off flag until the last few pieces are in place, and full testing can be done. Specific areas I'm looking at next: - Improved comments and some code cleanup from reviews. - SSAUpdater and enabling this pass inside the CGSCC pass manager. - Some datastructure tuning and compile-time measurements. - More aggressive FCA splitting and vector formation. Many thanks to Duncan Sands for the thorough final review, as well as Benjamin Kramer for lots of review during the process of writing this pass, and Daniel Berlin for reviewing the data structures and algorithms and general theory of the pass. Also, several other people on IRC, over lunch tables, etc for lots of feedback and advice. llvm-svn: 163883
2012-09-14 11:22:59 +02:00
%a1 = getelementptr [2 x i32]* %a, i64 0, i32 1
store i32 1, i32* %a1
%select = select i1 true, i32* %a1, i32* %b
%select2 = select i1 false, i32* %a1, i32* %b
Fix a case where the new SROA pass failed to zap dead operands to selects with a constant condition. This resulted in the operands remaining live through the SROA rewriter. Most of the time, this just caused some dead allocas to persist and get zapped by later passes, but in one case found by Joerg, it caused a crash when we tried to *promote* the alloca despite it having this dead use. We already have the mechanisms in place to handle this, just wire select up to them. llvm-svn: 164427
2012-09-22 01:36:40 +02:00
%select3 = select i1 false, i32* %c, i32* %b
; CHECK: %[[select2:.*]] = select i1 false, i32* undef, i32* %b
; CHECK: %[[select3:.*]] = select i1 false, i32* undef, i32* %b
Introduce a new SROA implementation. This is essentially a ground up re-think of the SROA pass in LLVM. It was initially inspired by a few problems with the existing pass: - It is subject to the bane of my existence in optimizations: arbitrary thresholds. - It is overly conservative about which constructs can be split and promoted. - The vector value replacement aspect is separated from the splitting logic, missing many opportunities where splitting and vector value formation can work together. - The splitting is entirely based around the underlying type of the alloca, despite this type often having little to do with the reality of how that memory is used. This is especially prevelant with unions and base classes where we tail-pack derived members. - When splitting fails (often due to the thresholds), the vector value replacement (again because it is separate) can kick in for preposterous cases where we simply should have split the value. This results in forming i1024 and i2048 integer "bit vectors" that tremendously slow down subsequnet IR optimizations (due to large APInts) and impede the backend's lowering. The new design takes an approach that fundamentally is not susceptible to many of these problems. It is the result of a discusison between myself and Duncan Sands over IRC about how to premptively avoid these types of problems and how to do SROA in a more principled way. Since then, it has evolved and grown, but this remains an important aspect: it fixes real world problems with the SROA process today. First, the transform of SROA actually has little to do with replacement. It has more to do with splitting. The goal is to take an aggregate alloca and form a composition of scalar allocas which can replace it and will be most suitable to the eventual replacement by scalar SSA values. The actual replacement is performed by mem2reg (and in the future SSAUpdater). The splitting is divided into four phases. The first phase is an analysis of the uses of the alloca. This phase recursively walks uses, building up a dense datastructure representing the ranges of the alloca's memory actually used and checking for uses which inhibit any aspects of the transform such as the escape of a pointer. Once we have a mapping of the ranges of the alloca used by individual operations, we compute a partitioning of the used ranges. Some uses are inherently splittable (such as memcpy and memset), while scalar uses are not splittable. The goal is to build a partitioning that has the minimum number of splits while placing each unsplittable use in its own partition. Overlapping unsplittable uses belong to the same partition. This is the target split of the aggregate alloca, and it maximizes the number of scalar accesses which become accesses to their own alloca and candidates for promotion. Third, we re-walk the uses of the alloca and assign each specific memory access to all the partitions touched so that we have dense use-lists for each partition. Finally, we build a new, smaller alloca for each partition and rewrite each use of that partition to use the new alloca. During this phase the pass will also work very hard to transform uses of an alloca into a form suitable for promotion, including forming vector operations, speculating loads throguh PHI nodes and selects, etc. After splitting is complete, each newly refined alloca that is a candidate for promotion to a scalar SSA value is run through mem2reg. There are lots of reasonably detailed comments in the source code about the design and algorithms, and I'm going to be trying to improve them in subsequent commits to ensure this is well documented, as the new pass is in many ways more complex than the old one. Some of this is still a WIP, but the current state is reasonbly stable. It has passed bootstrap, the nightly test suite, and Duncan has run it successfully through the ACATS and DragonEgg test suites. That said, it remains behind a default-off flag until the last few pieces are in place, and full testing can be done. Specific areas I'm looking at next: - Improved comments and some code cleanup from reviews. - SSAUpdater and enabling this pass inside the CGSCC pass manager. - Some datastructure tuning and compile-time measurements. - More aggressive FCA splitting and vector formation. Many thanks to Duncan Sands for the thorough final review, as well as Benjamin Kramer for lots of review during the process of writing this pass, and Daniel Berlin for reviewing the data structures and algorithms and general theory of the pass. Also, several other people on IRC, over lunch tables, etc for lots of feedback and advice. llvm-svn: 163883
2012-09-14 11:22:59 +02:00
; Note, this would potentially escape the alloca pointer except for the
; constant folding of the select.
Fix a case where the new SROA pass failed to zap dead operands to selects with a constant condition. This resulted in the operands remaining live through the SROA rewriter. Most of the time, this just caused some dead allocas to persist and get zapped by later passes, but in one case found by Joerg, it caused a crash when we tried to *promote* the alloca despite it having this dead use. We already have the mechanisms in place to handle this, just wire select up to them. llvm-svn: 164427
2012-09-22 01:36:40 +02:00
call void @f(i32* %select2, i32* %select3)
; CHECK: call void @f(i32* %[[select2]], i32* %[[select3]])
Introduce a new SROA implementation. This is essentially a ground up re-think of the SROA pass in LLVM. It was initially inspired by a few problems with the existing pass: - It is subject to the bane of my existence in optimizations: arbitrary thresholds. - It is overly conservative about which constructs can be split and promoted. - The vector value replacement aspect is separated from the splitting logic, missing many opportunities where splitting and vector value formation can work together. - The splitting is entirely based around the underlying type of the alloca, despite this type often having little to do with the reality of how that memory is used. This is especially prevelant with unions and base classes where we tail-pack derived members. - When splitting fails (often due to the thresholds), the vector value replacement (again because it is separate) can kick in for preposterous cases where we simply should have split the value. This results in forming i1024 and i2048 integer "bit vectors" that tremendously slow down subsequnet IR optimizations (due to large APInts) and impede the backend's lowering. The new design takes an approach that fundamentally is not susceptible to many of these problems. It is the result of a discusison between myself and Duncan Sands over IRC about how to premptively avoid these types of problems and how to do SROA in a more principled way. Since then, it has evolved and grown, but this remains an important aspect: it fixes real world problems with the SROA process today. First, the transform of SROA actually has little to do with replacement. It has more to do with splitting. The goal is to take an aggregate alloca and form a composition of scalar allocas which can replace it and will be most suitable to the eventual replacement by scalar SSA values. The actual replacement is performed by mem2reg (and in the future SSAUpdater). The splitting is divided into four phases. The first phase is an analysis of the uses of the alloca. This phase recursively walks uses, building up a dense datastructure representing the ranges of the alloca's memory actually used and checking for uses which inhibit any aspects of the transform such as the escape of a pointer. Once we have a mapping of the ranges of the alloca used by individual operations, we compute a partitioning of the used ranges. Some uses are inherently splittable (such as memcpy and memset), while scalar uses are not splittable. The goal is to build a partitioning that has the minimum number of splits while placing each unsplittable use in its own partition. Overlapping unsplittable uses belong to the same partition. This is the target split of the aggregate alloca, and it maximizes the number of scalar accesses which become accesses to their own alloca and candidates for promotion. Third, we re-walk the uses of the alloca and assign each specific memory access to all the partitions touched so that we have dense use-lists for each partition. Finally, we build a new, smaller alloca for each partition and rewrite each use of that partition to use the new alloca. During this phase the pass will also work very hard to transform uses of an alloca into a form suitable for promotion, including forming vector operations, speculating loads throguh PHI nodes and selects, etc. After splitting is complete, each newly refined alloca that is a candidate for promotion to a scalar SSA value is run through mem2reg. There are lots of reasonably detailed comments in the source code about the design and algorithms, and I'm going to be trying to improve them in subsequent commits to ensure this is well documented, as the new pass is in many ways more complex than the old one. Some of this is still a WIP, but the current state is reasonbly stable. It has passed bootstrap, the nightly test suite, and Duncan has run it successfully through the ACATS and DragonEgg test suites. That said, it remains behind a default-off flag until the last few pieces are in place, and full testing can be done. Specific areas I'm looking at next: - Improved comments and some code cleanup from reviews. - SSAUpdater and enabling this pass inside the CGSCC pass manager. - Some datastructure tuning and compile-time measurements. - More aggressive FCA splitting and vector formation. Many thanks to Duncan Sands for the thorough final review, as well as Benjamin Kramer for lots of review during the process of writing this pass, and Daniel Berlin for reviewing the data structures and algorithms and general theory of the pass. Also, several other people on IRC, over lunch tables, etc for lots of feedback and advice. llvm-svn: 163883
2012-09-14 11:22:59 +02:00
%result = load i32* %select
; CHECK-NOT: load
Fix a case where the new SROA pass failed to zap dead operands to selects with a constant condition. This resulted in the operands remaining live through the SROA rewriter. Most of the time, this just caused some dead allocas to persist and get zapped by later passes, but in one case found by Joerg, it caused a crash when we tried to *promote* the alloca despite it having this dead use. We already have the mechanisms in place to handle this, just wire select up to them. llvm-svn: 164427
2012-09-22 01:36:40 +02:00
%dead = load i32* %c
Introduce a new SROA implementation. This is essentially a ground up re-think of the SROA pass in LLVM. It was initially inspired by a few problems with the existing pass: - It is subject to the bane of my existence in optimizations: arbitrary thresholds. - It is overly conservative about which constructs can be split and promoted. - The vector value replacement aspect is separated from the splitting logic, missing many opportunities where splitting and vector value formation can work together. - The splitting is entirely based around the underlying type of the alloca, despite this type often having little to do with the reality of how that memory is used. This is especially prevelant with unions and base classes where we tail-pack derived members. - When splitting fails (often due to the thresholds), the vector value replacement (again because it is separate) can kick in for preposterous cases where we simply should have split the value. This results in forming i1024 and i2048 integer "bit vectors" that tremendously slow down subsequnet IR optimizations (due to large APInts) and impede the backend's lowering. The new design takes an approach that fundamentally is not susceptible to many of these problems. It is the result of a discusison between myself and Duncan Sands over IRC about how to premptively avoid these types of problems and how to do SROA in a more principled way. Since then, it has evolved and grown, but this remains an important aspect: it fixes real world problems with the SROA process today. First, the transform of SROA actually has little to do with replacement. It has more to do with splitting. The goal is to take an aggregate alloca and form a composition of scalar allocas which can replace it and will be most suitable to the eventual replacement by scalar SSA values. The actual replacement is performed by mem2reg (and in the future SSAUpdater). The splitting is divided into four phases. The first phase is an analysis of the uses of the alloca. This phase recursively walks uses, building up a dense datastructure representing the ranges of the alloca's memory actually used and checking for uses which inhibit any aspects of the transform such as the escape of a pointer. Once we have a mapping of the ranges of the alloca used by individual operations, we compute a partitioning of the used ranges. Some uses are inherently splittable (such as memcpy and memset), while scalar uses are not splittable. The goal is to build a partitioning that has the minimum number of splits while placing each unsplittable use in its own partition. Overlapping unsplittable uses belong to the same partition. This is the target split of the aggregate alloca, and it maximizes the number of scalar accesses which become accesses to their own alloca and candidates for promotion. Third, we re-walk the uses of the alloca and assign each specific memory access to all the partitions touched so that we have dense use-lists for each partition. Finally, we build a new, smaller alloca for each partition and rewrite each use of that partition to use the new alloca. During this phase the pass will also work very hard to transform uses of an alloca into a form suitable for promotion, including forming vector operations, speculating loads throguh PHI nodes and selects, etc. After splitting is complete, each newly refined alloca that is a candidate for promotion to a scalar SSA value is run through mem2reg. There are lots of reasonably detailed comments in the source code about the design and algorithms, and I'm going to be trying to improve them in subsequent commits to ensure this is well documented, as the new pass is in many ways more complex than the old one. Some of this is still a WIP, but the current state is reasonbly stable. It has passed bootstrap, the nightly test suite, and Duncan has run it successfully through the ACATS and DragonEgg test suites. That said, it remains behind a default-off flag until the last few pieces are in place, and full testing can be done. Specific areas I'm looking at next: - Improved comments and some code cleanup from reviews. - SSAUpdater and enabling this pass inside the CGSCC pass manager. - Some datastructure tuning and compile-time measurements. - More aggressive FCA splitting and vector formation. Many thanks to Duncan Sands for the thorough final review, as well as Benjamin Kramer for lots of review during the process of writing this pass, and Daniel Berlin for reviewing the data structures and algorithms and general theory of the pass. Also, several other people on IRC, over lunch tables, etc for lots of feedback and advice. llvm-svn: 163883
2012-09-14 11:22:59 +02:00
ret i32 %result
; CHECK: ret i32 1
}
define i32 @test7() {
Update Transforms tests to use CHECK-LABEL for easier debugging. No functionality change. This update was done with the following bash script: find test/Transforms -name "*.ll" | \ while read NAME; do echo "$NAME" if ! grep -q "^; *RUN: *llc" $NAME; then TEMP=`mktemp -t temp` cp $NAME $TEMP sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \ while read FUNC; do sed -i '' "s/;\(.*\)\([A-Za-z0-9_]*\):\( *\)@$FUNC\([( ]*\)\$/;\1\2-LABEL:\3@$FUNC(/g" $TEMP done mv $TEMP $NAME fi done llvm-svn: 186268
2013-07-14 03:42:54 +02:00
; CHECK-LABEL: @test7(
Introduce a new SROA implementation. This is essentially a ground up re-think of the SROA pass in LLVM. It was initially inspired by a few problems with the existing pass: - It is subject to the bane of my existence in optimizations: arbitrary thresholds. - It is overly conservative about which constructs can be split and promoted. - The vector value replacement aspect is separated from the splitting logic, missing many opportunities where splitting and vector value formation can work together. - The splitting is entirely based around the underlying type of the alloca, despite this type often having little to do with the reality of how that memory is used. This is especially prevelant with unions and base classes where we tail-pack derived members. - When splitting fails (often due to the thresholds), the vector value replacement (again because it is separate) can kick in for preposterous cases where we simply should have split the value. This results in forming i1024 and i2048 integer "bit vectors" that tremendously slow down subsequnet IR optimizations (due to large APInts) and impede the backend's lowering. The new design takes an approach that fundamentally is not susceptible to many of these problems. It is the result of a discusison between myself and Duncan Sands over IRC about how to premptively avoid these types of problems and how to do SROA in a more principled way. Since then, it has evolved and grown, but this remains an important aspect: it fixes real world problems with the SROA process today. First, the transform of SROA actually has little to do with replacement. It has more to do with splitting. The goal is to take an aggregate alloca and form a composition of scalar allocas which can replace it and will be most suitable to the eventual replacement by scalar SSA values. The actual replacement is performed by mem2reg (and in the future SSAUpdater). The splitting is divided into four phases. The first phase is an analysis of the uses of the alloca. This phase recursively walks uses, building up a dense datastructure representing the ranges of the alloca's memory actually used and checking for uses which inhibit any aspects of the transform such as the escape of a pointer. Once we have a mapping of the ranges of the alloca used by individual operations, we compute a partitioning of the used ranges. Some uses are inherently splittable (such as memcpy and memset), while scalar uses are not splittable. The goal is to build a partitioning that has the minimum number of splits while placing each unsplittable use in its own partition. Overlapping unsplittable uses belong to the same partition. This is the target split of the aggregate alloca, and it maximizes the number of scalar accesses which become accesses to their own alloca and candidates for promotion. Third, we re-walk the uses of the alloca and assign each specific memory access to all the partitions touched so that we have dense use-lists for each partition. Finally, we build a new, smaller alloca for each partition and rewrite each use of that partition to use the new alloca. During this phase the pass will also work very hard to transform uses of an alloca into a form suitable for promotion, including forming vector operations, speculating loads throguh PHI nodes and selects, etc. After splitting is complete, each newly refined alloca that is a candidate for promotion to a scalar SSA value is run through mem2reg. There are lots of reasonably detailed comments in the source code about the design and algorithms, and I'm going to be trying to improve them in subsequent commits to ensure this is well documented, as the new pass is in many ways more complex than the old one. Some of this is still a WIP, but the current state is reasonbly stable. It has passed bootstrap, the nightly test suite, and Duncan has run it successfully through the ACATS and DragonEgg test suites. That said, it remains behind a default-off flag until the last few pieces are in place, and full testing can be done. Specific areas I'm looking at next: - Improved comments and some code cleanup from reviews. - SSAUpdater and enabling this pass inside the CGSCC pass manager. - Some datastructure tuning and compile-time measurements. - More aggressive FCA splitting and vector formation. Many thanks to Duncan Sands for the thorough final review, as well as Benjamin Kramer for lots of review during the process of writing this pass, and Daniel Berlin for reviewing the data structures and algorithms and general theory of the pass. Also, several other people on IRC, over lunch tables, etc for lots of feedback and advice. llvm-svn: 163883
2012-09-14 11:22:59 +02:00
; CHECK-NOT: alloca
entry:
%X = alloca i32
br i1 undef, label %good, label %bad
good:
%Y1 = getelementptr i32* %X, i64 0
store i32 0, i32* %Y1
br label %exit
bad:
%Y2 = getelementptr i32* %X, i64 1
store i32 0, i32* %Y2
br label %exit
exit:
%P = phi i32* [ %Y1, %good ], [ %Y2, %bad ]
; CHECK: %[[phi:.*]] = phi i32 [ 0, %good ],
%Z2 = load i32* %P
ret i32 %Z2
; CHECK: ret i32 %[[phi]]
}
define i32 @test8(i32 %b, i32* %ptr) {
; Ensure that we rewrite allocas to the used type when that use is hidden by
; a PHI that can be speculated.
Update Transforms tests to use CHECK-LABEL for easier debugging. No functionality change. This update was done with the following bash script: find test/Transforms -name "*.ll" | \ while read NAME; do echo "$NAME" if ! grep -q "^; *RUN: *llc" $NAME; then TEMP=`mktemp -t temp` cp $NAME $TEMP sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \ while read FUNC; do sed -i '' "s/;\(.*\)\([A-Za-z0-9_]*\):\( *\)@$FUNC\([( ]*\)\$/;\1\2-LABEL:\3@$FUNC(/g" $TEMP done mv $TEMP $NAME fi done llvm-svn: 186268
2013-07-14 03:42:54 +02:00
; CHECK-LABEL: @test8(
Introduce a new SROA implementation. This is essentially a ground up re-think of the SROA pass in LLVM. It was initially inspired by a few problems with the existing pass: - It is subject to the bane of my existence in optimizations: arbitrary thresholds. - It is overly conservative about which constructs can be split and promoted. - The vector value replacement aspect is separated from the splitting logic, missing many opportunities where splitting and vector value formation can work together. - The splitting is entirely based around the underlying type of the alloca, despite this type often having little to do with the reality of how that memory is used. This is especially prevelant with unions and base classes where we tail-pack derived members. - When splitting fails (often due to the thresholds), the vector value replacement (again because it is separate) can kick in for preposterous cases where we simply should have split the value. This results in forming i1024 and i2048 integer "bit vectors" that tremendously slow down subsequnet IR optimizations (due to large APInts) and impede the backend's lowering. The new design takes an approach that fundamentally is not susceptible to many of these problems. It is the result of a discusison between myself and Duncan Sands over IRC about how to premptively avoid these types of problems and how to do SROA in a more principled way. Since then, it has evolved and grown, but this remains an important aspect: it fixes real world problems with the SROA process today. First, the transform of SROA actually has little to do with replacement. It has more to do with splitting. The goal is to take an aggregate alloca and form a composition of scalar allocas which can replace it and will be most suitable to the eventual replacement by scalar SSA values. The actual replacement is performed by mem2reg (and in the future SSAUpdater). The splitting is divided into four phases. The first phase is an analysis of the uses of the alloca. This phase recursively walks uses, building up a dense datastructure representing the ranges of the alloca's memory actually used and checking for uses which inhibit any aspects of the transform such as the escape of a pointer. Once we have a mapping of the ranges of the alloca used by individual operations, we compute a partitioning of the used ranges. Some uses are inherently splittable (such as memcpy and memset), while scalar uses are not splittable. The goal is to build a partitioning that has the minimum number of splits while placing each unsplittable use in its own partition. Overlapping unsplittable uses belong to the same partition. This is the target split of the aggregate alloca, and it maximizes the number of scalar accesses which become accesses to their own alloca and candidates for promotion. Third, we re-walk the uses of the alloca and assign each specific memory access to all the partitions touched so that we have dense use-lists for each partition. Finally, we build a new, smaller alloca for each partition and rewrite each use of that partition to use the new alloca. During this phase the pass will also work very hard to transform uses of an alloca into a form suitable for promotion, including forming vector operations, speculating loads throguh PHI nodes and selects, etc. After splitting is complete, each newly refined alloca that is a candidate for promotion to a scalar SSA value is run through mem2reg. There are lots of reasonably detailed comments in the source code about the design and algorithms, and I'm going to be trying to improve them in subsequent commits to ensure this is well documented, as the new pass is in many ways more complex than the old one. Some of this is still a WIP, but the current state is reasonbly stable. It has passed bootstrap, the nightly test suite, and Duncan has run it successfully through the ACATS and DragonEgg test suites. That said, it remains behind a default-off flag until the last few pieces are in place, and full testing can be done. Specific areas I'm looking at next: - Improved comments and some code cleanup from reviews. - SSAUpdater and enabling this pass inside the CGSCC pass manager. - Some datastructure tuning and compile-time measurements. - More aggressive FCA splitting and vector formation. Many thanks to Duncan Sands for the thorough final review, as well as Benjamin Kramer for lots of review during the process of writing this pass, and Daniel Berlin for reviewing the data structures and algorithms and general theory of the pass. Also, several other people on IRC, over lunch tables, etc for lots of feedback and advice. llvm-svn: 163883
2012-09-14 11:22:59 +02:00
; CHECK-NOT: alloca
; CHECK-NOT: load
; CHECK: %[[value:.*]] = load i32* %ptr
; CHECK-NOT: load
; CHECK: %[[result:.*]] = phi i32 [ undef, %else ], [ %[[value]], %then ]
; CHECK-NEXT: ret i32 %[[result]]
entry:
%f = alloca float
%test = icmp ne i32 %b, 0
br i1 %test, label %then, label %else
then:
br label %exit
else:
%bitcast = bitcast float* %f to i32*
br label %exit
exit:
%phi = phi i32* [ %bitcast, %else ], [ %ptr, %then ]
%loaded = load i32* %phi, align 4
ret i32 %loaded
}
define i32 @test9(i32 %b, i32* %ptr) {
; Same as @test8 but for a select rather than a PHI node.
Update Transforms tests to use CHECK-LABEL for easier debugging. No functionality change. This update was done with the following bash script: find test/Transforms -name "*.ll" | \ while read NAME; do echo "$NAME" if ! grep -q "^; *RUN: *llc" $NAME; then TEMP=`mktemp -t temp` cp $NAME $TEMP sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \ while read FUNC; do sed -i '' "s/;\(.*\)\([A-Za-z0-9_]*\):\( *\)@$FUNC\([( ]*\)\$/;\1\2-LABEL:\3@$FUNC(/g" $TEMP done mv $TEMP $NAME fi done llvm-svn: 186268
2013-07-14 03:42:54 +02:00
; CHECK-LABEL: @test9(
Introduce a new SROA implementation. This is essentially a ground up re-think of the SROA pass in LLVM. It was initially inspired by a few problems with the existing pass: - It is subject to the bane of my existence in optimizations: arbitrary thresholds. - It is overly conservative about which constructs can be split and promoted. - The vector value replacement aspect is separated from the splitting logic, missing many opportunities where splitting and vector value formation can work together. - The splitting is entirely based around the underlying type of the alloca, despite this type often having little to do with the reality of how that memory is used. This is especially prevelant with unions and base classes where we tail-pack derived members. - When splitting fails (often due to the thresholds), the vector value replacement (again because it is separate) can kick in for preposterous cases where we simply should have split the value. This results in forming i1024 and i2048 integer "bit vectors" that tremendously slow down subsequnet IR optimizations (due to large APInts) and impede the backend's lowering. The new design takes an approach that fundamentally is not susceptible to many of these problems. It is the result of a discusison between myself and Duncan Sands over IRC about how to premptively avoid these types of problems and how to do SROA in a more principled way. Since then, it has evolved and grown, but this remains an important aspect: it fixes real world problems with the SROA process today. First, the transform of SROA actually has little to do with replacement. It has more to do with splitting. The goal is to take an aggregate alloca and form a composition of scalar allocas which can replace it and will be most suitable to the eventual replacement by scalar SSA values. The actual replacement is performed by mem2reg (and in the future SSAUpdater). The splitting is divided into four phases. The first phase is an analysis of the uses of the alloca. This phase recursively walks uses, building up a dense datastructure representing the ranges of the alloca's memory actually used and checking for uses which inhibit any aspects of the transform such as the escape of a pointer. Once we have a mapping of the ranges of the alloca used by individual operations, we compute a partitioning of the used ranges. Some uses are inherently splittable (such as memcpy and memset), while scalar uses are not splittable. The goal is to build a partitioning that has the minimum number of splits while placing each unsplittable use in its own partition. Overlapping unsplittable uses belong to the same partition. This is the target split of the aggregate alloca, and it maximizes the number of scalar accesses which become accesses to their own alloca and candidates for promotion. Third, we re-walk the uses of the alloca and assign each specific memory access to all the partitions touched so that we have dense use-lists for each partition. Finally, we build a new, smaller alloca for each partition and rewrite each use of that partition to use the new alloca. During this phase the pass will also work very hard to transform uses of an alloca into a form suitable for promotion, including forming vector operations, speculating loads throguh PHI nodes and selects, etc. After splitting is complete, each newly refined alloca that is a candidate for promotion to a scalar SSA value is run through mem2reg. There are lots of reasonably detailed comments in the source code about the design and algorithms, and I'm going to be trying to improve them in subsequent commits to ensure this is well documented, as the new pass is in many ways more complex than the old one. Some of this is still a WIP, but the current state is reasonbly stable. It has passed bootstrap, the nightly test suite, and Duncan has run it successfully through the ACATS and DragonEgg test suites. That said, it remains behind a default-off flag until the last few pieces are in place, and full testing can be done. Specific areas I'm looking at next: - Improved comments and some code cleanup from reviews. - SSAUpdater and enabling this pass inside the CGSCC pass manager. - Some datastructure tuning and compile-time measurements. - More aggressive FCA splitting and vector formation. Many thanks to Duncan Sands for the thorough final review, as well as Benjamin Kramer for lots of review during the process of writing this pass, and Daniel Berlin for reviewing the data structures and algorithms and general theory of the pass. Also, several other people on IRC, over lunch tables, etc for lots of feedback and advice. llvm-svn: 163883
2012-09-14 11:22:59 +02:00
; CHECK-NOT: alloca
; CHECK-NOT: load
; CHECK: %[[value:.*]] = load i32* %ptr
; CHECK-NOT: load
; CHECK: %[[result:.*]] = select i1 %{{.*}}, i32 undef, i32 %[[value]]
; CHECK-NEXT: ret i32 %[[result]]
entry:
%f = alloca float
store i32 0, i32* %ptr
%test = icmp ne i32 %b, 0
%bitcast = bitcast float* %f to i32*
%select = select i1 %test, i32* %bitcast, i32* %ptr
%loaded = load i32* %select, align 4
ret i32 %loaded
}
First major step toward addressing PR14059. This teaches SROA to handle cases where we have partial integer loads and stores to an otherwise promotable alloca to widen[1] those loads and stores to cover the entire alloca and bitcast them into the appropriate type such that promotion can proceed. These partial loads and stores stem from an annoying confluence of ARM's calling convention and ABI lowering and the FCA pre-splitting which takes place in SROA. Clang lowers a { double, double } in-register function argument as a [4 x i32] function argument to ensure it is placed into integer 32-bit registers (a really unnerving implicit contract between Clang and the ARM backend I would add). This results in a FCA load of [4 x i32]* from the { double, double } alloca, and SROA decomposes this into a sequence of i32 loads and stores. Inlining proceeds, code gets folded, but at the end of the day, we still have i32 stores to the low and high halves of a double alloca. Widening these to be i64 operations, and bitcasting them to double prior to loading or storing allows promotion to proceed for these allocas. I looked quite a bit changing the IR which Clang produces for this case to be more friendly, but small changes seem unlikely to help. I think the best representation we could use currently would be to pass 4 i32 arguments thereby avoiding any FCAs, but that would still require this fix. It seems like it might eventually be nice to somehow encode the ABI register selection choices outside of the parameter type system so that the parameter can be a { double, double }, but the CC register annotations indicate that this should be passed via 4 integer registers. This patch does not address the second problem in PR14059, which is the reverse: when a struct alloca is loaded as a *larger* single integer. This patch also does not address some of the code quality issues with the FCA-splitting. Those don't actually impede any optimizations really, but they're on my list to clean up. [1]: Pedantic footnote: for those concerned about memory model issues here, this is safe. For the alloca to be promotable, it cannot escape or have any use of its address that could allow these loads or stores to be racing. Thus, widening is always safe. llvm-svn: 165928
2012-10-15 10:40:30 +02:00
define float @test10(i32 %b, float* %ptr) {
Introduce a new SROA implementation. This is essentially a ground up re-think of the SROA pass in LLVM. It was initially inspired by a few problems with the existing pass: - It is subject to the bane of my existence in optimizations: arbitrary thresholds. - It is overly conservative about which constructs can be split and promoted. - The vector value replacement aspect is separated from the splitting logic, missing many opportunities where splitting and vector value formation can work together. - The splitting is entirely based around the underlying type of the alloca, despite this type often having little to do with the reality of how that memory is used. This is especially prevelant with unions and base classes where we tail-pack derived members. - When splitting fails (often due to the thresholds), the vector value replacement (again because it is separate) can kick in for preposterous cases where we simply should have split the value. This results in forming i1024 and i2048 integer "bit vectors" that tremendously slow down subsequnet IR optimizations (due to large APInts) and impede the backend's lowering. The new design takes an approach that fundamentally is not susceptible to many of these problems. It is the result of a discusison between myself and Duncan Sands over IRC about how to premptively avoid these types of problems and how to do SROA in a more principled way. Since then, it has evolved and grown, but this remains an important aspect: it fixes real world problems with the SROA process today. First, the transform of SROA actually has little to do with replacement. It has more to do with splitting. The goal is to take an aggregate alloca and form a composition of scalar allocas which can replace it and will be most suitable to the eventual replacement by scalar SSA values. The actual replacement is performed by mem2reg (and in the future SSAUpdater). The splitting is divided into four phases. The first phase is an analysis of the uses of the alloca. This phase recursively walks uses, building up a dense datastructure representing the ranges of the alloca's memory actually used and checking for uses which inhibit any aspects of the transform such as the escape of a pointer. Once we have a mapping of the ranges of the alloca used by individual operations, we compute a partitioning of the used ranges. Some uses are inherently splittable (such as memcpy and memset), while scalar uses are not splittable. The goal is to build a partitioning that has the minimum number of splits while placing each unsplittable use in its own partition. Overlapping unsplittable uses belong to the same partition. This is the target split of the aggregate alloca, and it maximizes the number of scalar accesses which become accesses to their own alloca and candidates for promotion. Third, we re-walk the uses of the alloca and assign each specific memory access to all the partitions touched so that we have dense use-lists for each partition. Finally, we build a new, smaller alloca for each partition and rewrite each use of that partition to use the new alloca. During this phase the pass will also work very hard to transform uses of an alloca into a form suitable for promotion, including forming vector operations, speculating loads throguh PHI nodes and selects, etc. After splitting is complete, each newly refined alloca that is a candidate for promotion to a scalar SSA value is run through mem2reg. There are lots of reasonably detailed comments in the source code about the design and algorithms, and I'm going to be trying to improve them in subsequent commits to ensure this is well documented, as the new pass is in many ways more complex than the old one. Some of this is still a WIP, but the current state is reasonbly stable. It has passed bootstrap, the nightly test suite, and Duncan has run it successfully through the ACATS and DragonEgg test suites. That said, it remains behind a default-off flag until the last few pieces are in place, and full testing can be done. Specific areas I'm looking at next: - Improved comments and some code cleanup from reviews. - SSAUpdater and enabling this pass inside the CGSCC pass manager. - Some datastructure tuning and compile-time measurements. - More aggressive FCA splitting and vector formation. Many thanks to Duncan Sands for the thorough final review, as well as Benjamin Kramer for lots of review during the process of writing this pass, and Daniel Berlin for reviewing the data structures and algorithms and general theory of the pass. Also, several other people on IRC, over lunch tables, etc for lots of feedback and advice. llvm-svn: 163883
2012-09-14 11:22:59 +02:00
; Don't try to promote allocas which are not elligible for it even after
; rewriting due to the necessity of inserting bitcasts when speculating a PHI
; node.
Update Transforms tests to use CHECK-LABEL for easier debugging. No functionality change. This update was done with the following bash script: find test/Transforms -name "*.ll" | \ while read NAME; do echo "$NAME" if ! grep -q "^; *RUN: *llc" $NAME; then TEMP=`mktemp -t temp` cp $NAME $TEMP sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \ while read FUNC; do sed -i '' "s/;\(.*\)\([A-Za-z0-9_]*\):\( *\)@$FUNC\([( ]*\)\$/;\1\2-LABEL:\3@$FUNC(/g" $TEMP done mv $TEMP $NAME fi done llvm-svn: 186268
2013-07-14 03:42:54 +02:00
; CHECK-LABEL: @test10(
Introduce a new SROA implementation. This is essentially a ground up re-think of the SROA pass in LLVM. It was initially inspired by a few problems with the existing pass: - It is subject to the bane of my existence in optimizations: arbitrary thresholds. - It is overly conservative about which constructs can be split and promoted. - The vector value replacement aspect is separated from the splitting logic, missing many opportunities where splitting and vector value formation can work together. - The splitting is entirely based around the underlying type of the alloca, despite this type often having little to do with the reality of how that memory is used. This is especially prevelant with unions and base classes where we tail-pack derived members. - When splitting fails (often due to the thresholds), the vector value replacement (again because it is separate) can kick in for preposterous cases where we simply should have split the value. This results in forming i1024 and i2048 integer "bit vectors" that tremendously slow down subsequnet IR optimizations (due to large APInts) and impede the backend's lowering. The new design takes an approach that fundamentally is not susceptible to many of these problems. It is the result of a discusison between myself and Duncan Sands over IRC about how to premptively avoid these types of problems and how to do SROA in a more principled way. Since then, it has evolved and grown, but this remains an important aspect: it fixes real world problems with the SROA process today. First, the transform of SROA actually has little to do with replacement. It has more to do with splitting. The goal is to take an aggregate alloca and form a composition of scalar allocas which can replace it and will be most suitable to the eventual replacement by scalar SSA values. The actual replacement is performed by mem2reg (and in the future SSAUpdater). The splitting is divided into four phases. The first phase is an analysis of the uses of the alloca. This phase recursively walks uses, building up a dense datastructure representing the ranges of the alloca's memory actually used and checking for uses which inhibit any aspects of the transform such as the escape of a pointer. Once we have a mapping of the ranges of the alloca used by individual operations, we compute a partitioning of the used ranges. Some uses are inherently splittable (such as memcpy and memset), while scalar uses are not splittable. The goal is to build a partitioning that has the minimum number of splits while placing each unsplittable use in its own partition. Overlapping unsplittable uses belong to the same partition. This is the target split of the aggregate alloca, and it maximizes the number of scalar accesses which become accesses to their own alloca and candidates for promotion. Third, we re-walk the uses of the alloca and assign each specific memory access to all the partitions touched so that we have dense use-lists for each partition. Finally, we build a new, smaller alloca for each partition and rewrite each use of that partition to use the new alloca. During this phase the pass will also work very hard to transform uses of an alloca into a form suitable for promotion, including forming vector operations, speculating loads throguh PHI nodes and selects, etc. After splitting is complete, each newly refined alloca that is a candidate for promotion to a scalar SSA value is run through mem2reg. There are lots of reasonably detailed comments in the source code about the design and algorithms, and I'm going to be trying to improve them in subsequent commits to ensure this is well documented, as the new pass is in many ways more complex than the old one. Some of this is still a WIP, but the current state is reasonbly stable. It has passed bootstrap, the nightly test suite, and Duncan has run it successfully through the ACATS and DragonEgg test suites. That said, it remains behind a default-off flag until the last few pieces are in place, and full testing can be done. Specific areas I'm looking at next: - Improved comments and some code cleanup from reviews. - SSAUpdater and enabling this pass inside the CGSCC pass manager. - Some datastructure tuning and compile-time measurements. - More aggressive FCA splitting and vector formation. Many thanks to Duncan Sands for the thorough final review, as well as Benjamin Kramer for lots of review during the process of writing this pass, and Daniel Berlin for reviewing the data structures and algorithms and general theory of the pass. Also, several other people on IRC, over lunch tables, etc for lots of feedback and advice. llvm-svn: 163883
2012-09-14 11:22:59 +02:00
; CHECK: %[[alloca:.*]] = alloca
First major step toward addressing PR14059. This teaches SROA to handle cases where we have partial integer loads and stores to an otherwise promotable alloca to widen[1] those loads and stores to cover the entire alloca and bitcast them into the appropriate type such that promotion can proceed. These partial loads and stores stem from an annoying confluence of ARM's calling convention and ABI lowering and the FCA pre-splitting which takes place in SROA. Clang lowers a { double, double } in-register function argument as a [4 x i32] function argument to ensure it is placed into integer 32-bit registers (a really unnerving implicit contract between Clang and the ARM backend I would add). This results in a FCA load of [4 x i32]* from the { double, double } alloca, and SROA decomposes this into a sequence of i32 loads and stores. Inlining proceeds, code gets folded, but at the end of the day, we still have i32 stores to the low and high halves of a double alloca. Widening these to be i64 operations, and bitcasting them to double prior to loading or storing allows promotion to proceed for these allocas. I looked quite a bit changing the IR which Clang produces for this case to be more friendly, but small changes seem unlikely to help. I think the best representation we could use currently would be to pass 4 i32 arguments thereby avoiding any FCAs, but that would still require this fix. It seems like it might eventually be nice to somehow encode the ABI register selection choices outside of the parameter type system so that the parameter can be a { double, double }, but the CC register annotations indicate that this should be passed via 4 integer registers. This patch does not address the second problem in PR14059, which is the reverse: when a struct alloca is loaded as a *larger* single integer. This patch also does not address some of the code quality issues with the FCA-splitting. Those don't actually impede any optimizations really, but they're on my list to clean up. [1]: Pedantic footnote: for those concerned about memory model issues here, this is safe. For the alloca to be promotable, it cannot escape or have any use of its address that could allow these loads or stores to be racing. Thus, widening is always safe. llvm-svn: 165928
2012-10-15 10:40:30 +02:00
; CHECK: %[[argvalue:.*]] = load float* %ptr
; CHECK: %[[cast:.*]] = bitcast double* %[[alloca]] to float*
; CHECK: %[[allocavalue:.*]] = load float* %[[cast]]
; CHECK: %[[result:.*]] = phi float [ %[[allocavalue]], %else ], [ %[[argvalue]], %then ]
; CHECK-NEXT: ret float %[[result]]
Introduce a new SROA implementation. This is essentially a ground up re-think of the SROA pass in LLVM. It was initially inspired by a few problems with the existing pass: - It is subject to the bane of my existence in optimizations: arbitrary thresholds. - It is overly conservative about which constructs can be split and promoted. - The vector value replacement aspect is separated from the splitting logic, missing many opportunities where splitting and vector value formation can work together. - The splitting is entirely based around the underlying type of the alloca, despite this type often having little to do with the reality of how that memory is used. This is especially prevelant with unions and base classes where we tail-pack derived members. - When splitting fails (often due to the thresholds), the vector value replacement (again because it is separate) can kick in for preposterous cases where we simply should have split the value. This results in forming i1024 and i2048 integer "bit vectors" that tremendously slow down subsequnet IR optimizations (due to large APInts) and impede the backend's lowering. The new design takes an approach that fundamentally is not susceptible to many of these problems. It is the result of a discusison between myself and Duncan Sands over IRC about how to premptively avoid these types of problems and how to do SROA in a more principled way. Since then, it has evolved and grown, but this remains an important aspect: it fixes real world problems with the SROA process today. First, the transform of SROA actually has little to do with replacement. It has more to do with splitting. The goal is to take an aggregate alloca and form a composition of scalar allocas which can replace it and will be most suitable to the eventual replacement by scalar SSA values. The actual replacement is performed by mem2reg (and in the future SSAUpdater). The splitting is divided into four phases. The first phase is an analysis of the uses of the alloca. This phase recursively walks uses, building up a dense datastructure representing the ranges of the alloca's memory actually used and checking for uses which inhibit any aspects of the transform such as the escape of a pointer. Once we have a mapping of the ranges of the alloca used by individual operations, we compute a partitioning of the used ranges. Some uses are inherently splittable (such as memcpy and memset), while scalar uses are not splittable. The goal is to build a partitioning that has the minimum number of splits while placing each unsplittable use in its own partition. Overlapping unsplittable uses belong to the same partition. This is the target split of the aggregate alloca, and it maximizes the number of scalar accesses which become accesses to their own alloca and candidates for promotion. Third, we re-walk the uses of the alloca and assign each specific memory access to all the partitions touched so that we have dense use-lists for each partition. Finally, we build a new, smaller alloca for each partition and rewrite each use of that partition to use the new alloca. During this phase the pass will also work very hard to transform uses of an alloca into a form suitable for promotion, including forming vector operations, speculating loads throguh PHI nodes and selects, etc. After splitting is complete, each newly refined alloca that is a candidate for promotion to a scalar SSA value is run through mem2reg. There are lots of reasonably detailed comments in the source code about the design and algorithms, and I'm going to be trying to improve them in subsequent commits to ensure this is well documented, as the new pass is in many ways more complex than the old one. Some of this is still a WIP, but the current state is reasonbly stable. It has passed bootstrap, the nightly test suite, and Duncan has run it successfully through the ACATS and DragonEgg test suites. That said, it remains behind a default-off flag until the last few pieces are in place, and full testing can be done. Specific areas I'm looking at next: - Improved comments and some code cleanup from reviews. - SSAUpdater and enabling this pass inside the CGSCC pass manager. - Some datastructure tuning and compile-time measurements. - More aggressive FCA splitting and vector formation. Many thanks to Duncan Sands for the thorough final review, as well as Benjamin Kramer for lots of review during the process of writing this pass, and Daniel Berlin for reviewing the data structures and algorithms and general theory of the pass. Also, several other people on IRC, over lunch tables, etc for lots of feedback and advice. llvm-svn: 163883
2012-09-14 11:22:59 +02:00
entry:
%f = alloca double
store double 0.0, double* %f
%test = icmp ne i32 %b, 0
br i1 %test, label %then, label %else
then:
br label %exit
else:
First major step toward addressing PR14059. This teaches SROA to handle cases where we have partial integer loads and stores to an otherwise promotable alloca to widen[1] those loads and stores to cover the entire alloca and bitcast them into the appropriate type such that promotion can proceed. These partial loads and stores stem from an annoying confluence of ARM's calling convention and ABI lowering and the FCA pre-splitting which takes place in SROA. Clang lowers a { double, double } in-register function argument as a [4 x i32] function argument to ensure it is placed into integer 32-bit registers (a really unnerving implicit contract between Clang and the ARM backend I would add). This results in a FCA load of [4 x i32]* from the { double, double } alloca, and SROA decomposes this into a sequence of i32 loads and stores. Inlining proceeds, code gets folded, but at the end of the day, we still have i32 stores to the low and high halves of a double alloca. Widening these to be i64 operations, and bitcasting them to double prior to loading or storing allows promotion to proceed for these allocas. I looked quite a bit changing the IR which Clang produces for this case to be more friendly, but small changes seem unlikely to help. I think the best representation we could use currently would be to pass 4 i32 arguments thereby avoiding any FCAs, but that would still require this fix. It seems like it might eventually be nice to somehow encode the ABI register selection choices outside of the parameter type system so that the parameter can be a { double, double }, but the CC register annotations indicate that this should be passed via 4 integer registers. This patch does not address the second problem in PR14059, which is the reverse: when a struct alloca is loaded as a *larger* single integer. This patch also does not address some of the code quality issues with the FCA-splitting. Those don't actually impede any optimizations really, but they're on my list to clean up. [1]: Pedantic footnote: for those concerned about memory model issues here, this is safe. For the alloca to be promotable, it cannot escape or have any use of its address that could allow these loads or stores to be racing. Thus, widening is always safe. llvm-svn: 165928
2012-10-15 10:40:30 +02:00
%bitcast = bitcast double* %f to float*
Introduce a new SROA implementation. This is essentially a ground up re-think of the SROA pass in LLVM. It was initially inspired by a few problems with the existing pass: - It is subject to the bane of my existence in optimizations: arbitrary thresholds. - It is overly conservative about which constructs can be split and promoted. - The vector value replacement aspect is separated from the splitting logic, missing many opportunities where splitting and vector value formation can work together. - The splitting is entirely based around the underlying type of the alloca, despite this type often having little to do with the reality of how that memory is used. This is especially prevelant with unions and base classes where we tail-pack derived members. - When splitting fails (often due to the thresholds), the vector value replacement (again because it is separate) can kick in for preposterous cases where we simply should have split the value. This results in forming i1024 and i2048 integer "bit vectors" that tremendously slow down subsequnet IR optimizations (due to large APInts) and impede the backend's lowering. The new design takes an approach that fundamentally is not susceptible to many of these problems. It is the result of a discusison between myself and Duncan Sands over IRC about how to premptively avoid these types of problems and how to do SROA in a more principled way. Since then, it has evolved and grown, but this remains an important aspect: it fixes real world problems with the SROA process today. First, the transform of SROA actually has little to do with replacement. It has more to do with splitting. The goal is to take an aggregate alloca and form a composition of scalar allocas which can replace it and will be most suitable to the eventual replacement by scalar SSA values. The actual replacement is performed by mem2reg (and in the future SSAUpdater). The splitting is divided into four phases. The first phase is an analysis of the uses of the alloca. This phase recursively walks uses, building up a dense datastructure representing the ranges of the alloca's memory actually used and checking for uses which inhibit any aspects of the transform such as the escape of a pointer. Once we have a mapping of the ranges of the alloca used by individual operations, we compute a partitioning of the used ranges. Some uses are inherently splittable (such as memcpy and memset), while scalar uses are not splittable. The goal is to build a partitioning that has the minimum number of splits while placing each unsplittable use in its own partition. Overlapping unsplittable uses belong to the same partition. This is the target split of the aggregate alloca, and it maximizes the number of scalar accesses which become accesses to their own alloca and candidates for promotion. Third, we re-walk the uses of the alloca and assign each specific memory access to all the partitions touched so that we have dense use-lists for each partition. Finally, we build a new, smaller alloca for each partition and rewrite each use of that partition to use the new alloca. During this phase the pass will also work very hard to transform uses of an alloca into a form suitable for promotion, including forming vector operations, speculating loads throguh PHI nodes and selects, etc. After splitting is complete, each newly refined alloca that is a candidate for promotion to a scalar SSA value is run through mem2reg. There are lots of reasonably detailed comments in the source code about the design and algorithms, and I'm going to be trying to improve them in subsequent commits to ensure this is well documented, as the new pass is in many ways more complex than the old one. Some of this is still a WIP, but the current state is reasonbly stable. It has passed bootstrap, the nightly test suite, and Duncan has run it successfully through the ACATS and DragonEgg test suites. That said, it remains behind a default-off flag until the last few pieces are in place, and full testing can be done. Specific areas I'm looking at next: - Improved comments and some code cleanup from reviews. - SSAUpdater and enabling this pass inside the CGSCC pass manager. - Some datastructure tuning and compile-time measurements. - More aggressive FCA splitting and vector formation. Many thanks to Duncan Sands for the thorough final review, as well as Benjamin Kramer for lots of review during the process of writing this pass, and Daniel Berlin for reviewing the data structures and algorithms and general theory of the pass. Also, several other people on IRC, over lunch tables, etc for lots of feedback and advice. llvm-svn: 163883
2012-09-14 11:22:59 +02:00
br label %exit
exit:
First major step toward addressing PR14059. This teaches SROA to handle cases where we have partial integer loads and stores to an otherwise promotable alloca to widen[1] those loads and stores to cover the entire alloca and bitcast them into the appropriate type such that promotion can proceed. These partial loads and stores stem from an annoying confluence of ARM's calling convention and ABI lowering and the FCA pre-splitting which takes place in SROA. Clang lowers a { double, double } in-register function argument as a [4 x i32] function argument to ensure it is placed into integer 32-bit registers (a really unnerving implicit contract between Clang and the ARM backend I would add). This results in a FCA load of [4 x i32]* from the { double, double } alloca, and SROA decomposes this into a sequence of i32 loads and stores. Inlining proceeds, code gets folded, but at the end of the day, we still have i32 stores to the low and high halves of a double alloca. Widening these to be i64 operations, and bitcasting them to double prior to loading or storing allows promotion to proceed for these allocas. I looked quite a bit changing the IR which Clang produces for this case to be more friendly, but small changes seem unlikely to help. I think the best representation we could use currently would be to pass 4 i32 arguments thereby avoiding any FCAs, but that would still require this fix. It seems like it might eventually be nice to somehow encode the ABI register selection choices outside of the parameter type system so that the parameter can be a { double, double }, but the CC register annotations indicate that this should be passed via 4 integer registers. This patch does not address the second problem in PR14059, which is the reverse: when a struct alloca is loaded as a *larger* single integer. This patch also does not address some of the code quality issues with the FCA-splitting. Those don't actually impede any optimizations really, but they're on my list to clean up. [1]: Pedantic footnote: for those concerned about memory model issues here, this is safe. For the alloca to be promotable, it cannot escape or have any use of its address that could allow these loads or stores to be racing. Thus, widening is always safe. llvm-svn: 165928
2012-10-15 10:40:30 +02:00
%phi = phi float* [ %bitcast, %else ], [ %ptr, %then ]
%loaded = load float* %phi, align 4
ret float %loaded
Introduce a new SROA implementation. This is essentially a ground up re-think of the SROA pass in LLVM. It was initially inspired by a few problems with the existing pass: - It is subject to the bane of my existence in optimizations: arbitrary thresholds. - It is overly conservative about which constructs can be split and promoted. - The vector value replacement aspect is separated from the splitting logic, missing many opportunities where splitting and vector value formation can work together. - The splitting is entirely based around the underlying type of the alloca, despite this type often having little to do with the reality of how that memory is used. This is especially prevelant with unions and base classes where we tail-pack derived members. - When splitting fails (often due to the thresholds), the vector value replacement (again because it is separate) can kick in for preposterous cases where we simply should have split the value. This results in forming i1024 and i2048 integer "bit vectors" that tremendously slow down subsequnet IR optimizations (due to large APInts) and impede the backend's lowering. The new design takes an approach that fundamentally is not susceptible to many of these problems. It is the result of a discusison between myself and Duncan Sands over IRC about how to premptively avoid these types of problems and how to do SROA in a more principled way. Since then, it has evolved and grown, but this remains an important aspect: it fixes real world problems with the SROA process today. First, the transform of SROA actually has little to do with replacement. It has more to do with splitting. The goal is to take an aggregate alloca and form a composition of scalar allocas which can replace it and will be most suitable to the eventual replacement by scalar SSA values. The actual replacement is performed by mem2reg (and in the future SSAUpdater). The splitting is divided into four phases. The first phase is an analysis of the uses of the alloca. This phase recursively walks uses, building up a dense datastructure representing the ranges of the alloca's memory actually used and checking for uses which inhibit any aspects of the transform such as the escape of a pointer. Once we have a mapping of the ranges of the alloca used by individual operations, we compute a partitioning of the used ranges. Some uses are inherently splittable (such as memcpy and memset), while scalar uses are not splittable. The goal is to build a partitioning that has the minimum number of splits while placing each unsplittable use in its own partition. Overlapping unsplittable uses belong to the same partition. This is the target split of the aggregate alloca, and it maximizes the number of scalar accesses which become accesses to their own alloca and candidates for promotion. Third, we re-walk the uses of the alloca and assign each specific memory access to all the partitions touched so that we have dense use-lists for each partition. Finally, we build a new, smaller alloca for each partition and rewrite each use of that partition to use the new alloca. During this phase the pass will also work very hard to transform uses of an alloca into a form suitable for promotion, including forming vector operations, speculating loads throguh PHI nodes and selects, etc. After splitting is complete, each newly refined alloca that is a candidate for promotion to a scalar SSA value is run through mem2reg. There are lots of reasonably detailed comments in the source code about the design and algorithms, and I'm going to be trying to improve them in subsequent commits to ensure this is well documented, as the new pass is in many ways more complex than the old one. Some of this is still a WIP, but the current state is reasonbly stable. It has passed bootstrap, the nightly test suite, and Duncan has run it successfully through the ACATS and DragonEgg test suites. That said, it remains behind a default-off flag until the last few pieces are in place, and full testing can be done. Specific areas I'm looking at next: - Improved comments and some code cleanup from reviews. - SSAUpdater and enabling this pass inside the CGSCC pass manager. - Some datastructure tuning and compile-time measurements. - More aggressive FCA splitting and vector formation. Many thanks to Duncan Sands for the thorough final review, as well as Benjamin Kramer for lots of review during the process of writing this pass, and Daniel Berlin for reviewing the data structures and algorithms and general theory of the pass. Also, several other people on IRC, over lunch tables, etc for lots of feedback and advice. llvm-svn: 163883
2012-09-14 11:22:59 +02:00
}
First major step toward addressing PR14059. This teaches SROA to handle cases where we have partial integer loads and stores to an otherwise promotable alloca to widen[1] those loads and stores to cover the entire alloca and bitcast them into the appropriate type such that promotion can proceed. These partial loads and stores stem from an annoying confluence of ARM's calling convention and ABI lowering and the FCA pre-splitting which takes place in SROA. Clang lowers a { double, double } in-register function argument as a [4 x i32] function argument to ensure it is placed into integer 32-bit registers (a really unnerving implicit contract between Clang and the ARM backend I would add). This results in a FCA load of [4 x i32]* from the { double, double } alloca, and SROA decomposes this into a sequence of i32 loads and stores. Inlining proceeds, code gets folded, but at the end of the day, we still have i32 stores to the low and high halves of a double alloca. Widening these to be i64 operations, and bitcasting them to double prior to loading or storing allows promotion to proceed for these allocas. I looked quite a bit changing the IR which Clang produces for this case to be more friendly, but small changes seem unlikely to help. I think the best representation we could use currently would be to pass 4 i32 arguments thereby avoiding any FCAs, but that would still require this fix. It seems like it might eventually be nice to somehow encode the ABI register selection choices outside of the parameter type system so that the parameter can be a { double, double }, but the CC register annotations indicate that this should be passed via 4 integer registers. This patch does not address the second problem in PR14059, which is the reverse: when a struct alloca is loaded as a *larger* single integer. This patch also does not address some of the code quality issues with the FCA-splitting. Those don't actually impede any optimizations really, but they're on my list to clean up. [1]: Pedantic footnote: for those concerned about memory model issues here, this is safe. For the alloca to be promotable, it cannot escape or have any use of its address that could allow these loads or stores to be racing. Thus, widening is always safe. llvm-svn: 165928
2012-10-15 10:40:30 +02:00
define float @test11(i32 %b, float* %ptr) {
Introduce a new SROA implementation. This is essentially a ground up re-think of the SROA pass in LLVM. It was initially inspired by a few problems with the existing pass: - It is subject to the bane of my existence in optimizations: arbitrary thresholds. - It is overly conservative about which constructs can be split and promoted. - The vector value replacement aspect is separated from the splitting logic, missing many opportunities where splitting and vector value formation can work together. - The splitting is entirely based around the underlying type of the alloca, despite this type often having little to do with the reality of how that memory is used. This is especially prevelant with unions and base classes where we tail-pack derived members. - When splitting fails (often due to the thresholds), the vector value replacement (again because it is separate) can kick in for preposterous cases where we simply should have split the value. This results in forming i1024 and i2048 integer "bit vectors" that tremendously slow down subsequnet IR optimizations (due to large APInts) and impede the backend's lowering. The new design takes an approach that fundamentally is not susceptible to many of these problems. It is the result of a discusison between myself and Duncan Sands over IRC about how to premptively avoid these types of problems and how to do SROA in a more principled way. Since then, it has evolved and grown, but this remains an important aspect: it fixes real world problems with the SROA process today. First, the transform of SROA actually has little to do with replacement. It has more to do with splitting. The goal is to take an aggregate alloca and form a composition of scalar allocas which can replace it and will be most suitable to the eventual replacement by scalar SSA values. The actual replacement is performed by mem2reg (and in the future SSAUpdater). The splitting is divided into four phases. The first phase is an analysis of the uses of the alloca. This phase recursively walks uses, building up a dense datastructure representing the ranges of the alloca's memory actually used and checking for uses which inhibit any aspects of the transform such as the escape of a pointer. Once we have a mapping of the ranges of the alloca used by individual operations, we compute a partitioning of the used ranges. Some uses are inherently splittable (such as memcpy and memset), while scalar uses are not splittable. The goal is to build a partitioning that has the minimum number of splits while placing each unsplittable use in its own partition. Overlapping unsplittable uses belong to the same partition. This is the target split of the aggregate alloca, and it maximizes the number of scalar accesses which become accesses to their own alloca and candidates for promotion. Third, we re-walk the uses of the alloca and assign each specific memory access to all the partitions touched so that we have dense use-lists for each partition. Finally, we build a new, smaller alloca for each partition and rewrite each use of that partition to use the new alloca. During this phase the pass will also work very hard to transform uses of an alloca into a form suitable for promotion, including forming vector operations, speculating loads throguh PHI nodes and selects, etc. After splitting is complete, each newly refined alloca that is a candidate for promotion to a scalar SSA value is run through mem2reg. There are lots of reasonably detailed comments in the source code about the design and algorithms, and I'm going to be trying to improve them in subsequent commits to ensure this is well documented, as the new pass is in many ways more complex than the old one. Some of this is still a WIP, but the current state is reasonbly stable. It has passed bootstrap, the nightly test suite, and Duncan has run it successfully through the ACATS and DragonEgg test suites. That said, it remains behind a default-off flag until the last few pieces are in place, and full testing can be done. Specific areas I'm looking at next: - Improved comments and some code cleanup from reviews. - SSAUpdater and enabling this pass inside the CGSCC pass manager. - Some datastructure tuning and compile-time measurements. - More aggressive FCA splitting and vector formation. Many thanks to Duncan Sands for the thorough final review, as well as Benjamin Kramer for lots of review during the process of writing this pass, and Daniel Berlin for reviewing the data structures and algorithms and general theory of the pass. Also, several other people on IRC, over lunch tables, etc for lots of feedback and advice. llvm-svn: 163883
2012-09-14 11:22:59 +02:00
; Same as @test10 but for a select rather than a PHI node.
Update Transforms tests to use CHECK-LABEL for easier debugging. No functionality change. This update was done with the following bash script: find test/Transforms -name "*.ll" | \ while read NAME; do echo "$NAME" if ! grep -q "^; *RUN: *llc" $NAME; then TEMP=`mktemp -t temp` cp $NAME $TEMP sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \ while read FUNC; do sed -i '' "s/;\(.*\)\([A-Za-z0-9_]*\):\( *\)@$FUNC\([( ]*\)\$/;\1\2-LABEL:\3@$FUNC(/g" $TEMP done mv $TEMP $NAME fi done llvm-svn: 186268
2013-07-14 03:42:54 +02:00
; CHECK-LABEL: @test11(
Introduce a new SROA implementation. This is essentially a ground up re-think of the SROA pass in LLVM. It was initially inspired by a few problems with the existing pass: - It is subject to the bane of my existence in optimizations: arbitrary thresholds. - It is overly conservative about which constructs can be split and promoted. - The vector value replacement aspect is separated from the splitting logic, missing many opportunities where splitting and vector value formation can work together. - The splitting is entirely based around the underlying type of the alloca, despite this type often having little to do with the reality of how that memory is used. This is especially prevelant with unions and base classes where we tail-pack derived members. - When splitting fails (often due to the thresholds), the vector value replacement (again because it is separate) can kick in for preposterous cases where we simply should have split the value. This results in forming i1024 and i2048 integer "bit vectors" that tremendously slow down subsequnet IR optimizations (due to large APInts) and impede the backend's lowering. The new design takes an approach that fundamentally is not susceptible to many of these problems. It is the result of a discusison between myself and Duncan Sands over IRC about how to premptively avoid these types of problems and how to do SROA in a more principled way. Since then, it has evolved and grown, but this remains an important aspect: it fixes real world problems with the SROA process today. First, the transform of SROA actually has little to do with replacement. It has more to do with splitting. The goal is to take an aggregate alloca and form a composition of scalar allocas which can replace it and will be most suitable to the eventual replacement by scalar SSA values. The actual replacement is performed by mem2reg (and in the future SSAUpdater). The splitting is divided into four phases. The first phase is an analysis of the uses of the alloca. This phase recursively walks uses, building up a dense datastructure representing the ranges of the alloca's memory actually used and checking for uses which inhibit any aspects of the transform such as the escape of a pointer. Once we have a mapping of the ranges of the alloca used by individual operations, we compute a partitioning of the used ranges. Some uses are inherently splittable (such as memcpy and memset), while scalar uses are not splittable. The goal is to build a partitioning that has the minimum number of splits while placing each unsplittable use in its own partition. Overlapping unsplittable uses belong to the same partition. This is the target split of the aggregate alloca, and it maximizes the number of scalar accesses which become accesses to their own alloca and candidates for promotion. Third, we re-walk the uses of the alloca and assign each specific memory access to all the partitions touched so that we have dense use-lists for each partition. Finally, we build a new, smaller alloca for each partition and rewrite each use of that partition to use the new alloca. During this phase the pass will also work very hard to transform uses of an alloca into a form suitable for promotion, including forming vector operations, speculating loads throguh PHI nodes and selects, etc. After splitting is complete, each newly refined alloca that is a candidate for promotion to a scalar SSA value is run through mem2reg. There are lots of reasonably detailed comments in the source code about the design and algorithms, and I'm going to be trying to improve them in subsequent commits to ensure this is well documented, as the new pass is in many ways more complex than the old one. Some of this is still a WIP, but the current state is reasonbly stable. It has passed bootstrap, the nightly test suite, and Duncan has run it successfully through the ACATS and DragonEgg test suites. That said, it remains behind a default-off flag until the last few pieces are in place, and full testing can be done. Specific areas I'm looking at next: - Improved comments and some code cleanup from reviews. - SSAUpdater and enabling this pass inside the CGSCC pass manager. - Some datastructure tuning and compile-time measurements. - More aggressive FCA splitting and vector formation. Many thanks to Duncan Sands for the thorough final review, as well as Benjamin Kramer for lots of review during the process of writing this pass, and Daniel Berlin for reviewing the data structures and algorithms and general theory of the pass. Also, several other people on IRC, over lunch tables, etc for lots of feedback and advice. llvm-svn: 163883
2012-09-14 11:22:59 +02:00
; CHECK: %[[alloca:.*]] = alloca
First major step toward addressing PR14059. This teaches SROA to handle cases where we have partial integer loads and stores to an otherwise promotable alloca to widen[1] those loads and stores to cover the entire alloca and bitcast them into the appropriate type such that promotion can proceed. These partial loads and stores stem from an annoying confluence of ARM's calling convention and ABI lowering and the FCA pre-splitting which takes place in SROA. Clang lowers a { double, double } in-register function argument as a [4 x i32] function argument to ensure it is placed into integer 32-bit registers (a really unnerving implicit contract between Clang and the ARM backend I would add). This results in a FCA load of [4 x i32]* from the { double, double } alloca, and SROA decomposes this into a sequence of i32 loads and stores. Inlining proceeds, code gets folded, but at the end of the day, we still have i32 stores to the low and high halves of a double alloca. Widening these to be i64 operations, and bitcasting them to double prior to loading or storing allows promotion to proceed for these allocas. I looked quite a bit changing the IR which Clang produces for this case to be more friendly, but small changes seem unlikely to help. I think the best representation we could use currently would be to pass 4 i32 arguments thereby avoiding any FCAs, but that would still require this fix. It seems like it might eventually be nice to somehow encode the ABI register selection choices outside of the parameter type system so that the parameter can be a { double, double }, but the CC register annotations indicate that this should be passed via 4 integer registers. This patch does not address the second problem in PR14059, which is the reverse: when a struct alloca is loaded as a *larger* single integer. This patch also does not address some of the code quality issues with the FCA-splitting. Those don't actually impede any optimizations really, but they're on my list to clean up. [1]: Pedantic footnote: for those concerned about memory model issues here, this is safe. For the alloca to be promotable, it cannot escape or have any use of its address that could allow these loads or stores to be racing. Thus, widening is always safe. llvm-svn: 165928
2012-10-15 10:40:30 +02:00
; CHECK: %[[cast:.*]] = bitcast double* %[[alloca]] to float*
; CHECK: %[[allocavalue:.*]] = load float* %[[cast]]
; CHECK: %[[argvalue:.*]] = load float* %ptr
; CHECK: %[[result:.*]] = select i1 %{{.*}}, float %[[allocavalue]], float %[[argvalue]]
; CHECK-NEXT: ret float %[[result]]
Introduce a new SROA implementation. This is essentially a ground up re-think of the SROA pass in LLVM. It was initially inspired by a few problems with the existing pass: - It is subject to the bane of my existence in optimizations: arbitrary thresholds. - It is overly conservative about which constructs can be split and promoted. - The vector value replacement aspect is separated from the splitting logic, missing many opportunities where splitting and vector value formation can work together. - The splitting is entirely based around the underlying type of the alloca, despite this type often having little to do with the reality of how that memory is used. This is especially prevelant with unions and base classes where we tail-pack derived members. - When splitting fails (often due to the thresholds), the vector value replacement (again because it is separate) can kick in for preposterous cases where we simply should have split the value. This results in forming i1024 and i2048 integer "bit vectors" that tremendously slow down subsequnet IR optimizations (due to large APInts) and impede the backend's lowering. The new design takes an approach that fundamentally is not susceptible to many of these problems. It is the result of a discusison between myself and Duncan Sands over IRC about how to premptively avoid these types of problems and how to do SROA in a more principled way. Since then, it has evolved and grown, but this remains an important aspect: it fixes real world problems with the SROA process today. First, the transform of SROA actually has little to do with replacement. It has more to do with splitting. The goal is to take an aggregate alloca and form a composition of scalar allocas which can replace it and will be most suitable to the eventual replacement by scalar SSA values. The actual replacement is performed by mem2reg (and in the future SSAUpdater). The splitting is divided into four phases. The first phase is an analysis of the uses of the alloca. This phase recursively walks uses, building up a dense datastructure representing the ranges of the alloca's memory actually used and checking for uses which inhibit any aspects of the transform such as the escape of a pointer. Once we have a mapping of the ranges of the alloca used by individual operations, we compute a partitioning of the used ranges. Some uses are inherently splittable (such as memcpy and memset), while scalar uses are not splittable. The goal is to build a partitioning that has the minimum number of splits while placing each unsplittable use in its own partition. Overlapping unsplittable uses belong to the same partition. This is the target split of the aggregate alloca, and it maximizes the number of scalar accesses which become accesses to their own alloca and candidates for promotion. Third, we re-walk the uses of the alloca and assign each specific memory access to all the partitions touched so that we have dense use-lists for each partition. Finally, we build a new, smaller alloca for each partition and rewrite each use of that partition to use the new alloca. During this phase the pass will also work very hard to transform uses of an alloca into a form suitable for promotion, including forming vector operations, speculating loads throguh PHI nodes and selects, etc. After splitting is complete, each newly refined alloca that is a candidate for promotion to a scalar SSA value is run through mem2reg. There are lots of reasonably detailed comments in the source code about the design and algorithms, and I'm going to be trying to improve them in subsequent commits to ensure this is well documented, as the new pass is in many ways more complex than the old one. Some of this is still a WIP, but the current state is reasonbly stable. It has passed bootstrap, the nightly test suite, and Duncan has run it successfully through the ACATS and DragonEgg test suites. That said, it remains behind a default-off flag until the last few pieces are in place, and full testing can be done. Specific areas I'm looking at next: - Improved comments and some code cleanup from reviews. - SSAUpdater and enabling this pass inside the CGSCC pass manager. - Some datastructure tuning and compile-time measurements. - More aggressive FCA splitting and vector formation. Many thanks to Duncan Sands for the thorough final review, as well as Benjamin Kramer for lots of review during the process of writing this pass, and Daniel Berlin for reviewing the data structures and algorithms and general theory of the pass. Also, several other people on IRC, over lunch tables, etc for lots of feedback and advice. llvm-svn: 163883
2012-09-14 11:22:59 +02:00
entry:
%f = alloca double
store double 0.0, double* %f
First major step toward addressing PR14059. This teaches SROA to handle cases where we have partial integer loads and stores to an otherwise promotable alloca to widen[1] those loads and stores to cover the entire alloca and bitcast them into the appropriate type such that promotion can proceed. These partial loads and stores stem from an annoying confluence of ARM's calling convention and ABI lowering and the FCA pre-splitting which takes place in SROA. Clang lowers a { double, double } in-register function argument as a [4 x i32] function argument to ensure it is placed into integer 32-bit registers (a really unnerving implicit contract between Clang and the ARM backend I would add). This results in a FCA load of [4 x i32]* from the { double, double } alloca, and SROA decomposes this into a sequence of i32 loads and stores. Inlining proceeds, code gets folded, but at the end of the day, we still have i32 stores to the low and high halves of a double alloca. Widening these to be i64 operations, and bitcasting them to double prior to loading or storing allows promotion to proceed for these allocas. I looked quite a bit changing the IR which Clang produces for this case to be more friendly, but small changes seem unlikely to help. I think the best representation we could use currently would be to pass 4 i32 arguments thereby avoiding any FCAs, but that would still require this fix. It seems like it might eventually be nice to somehow encode the ABI register selection choices outside of the parameter type system so that the parameter can be a { double, double }, but the CC register annotations indicate that this should be passed via 4 integer registers. This patch does not address the second problem in PR14059, which is the reverse: when a struct alloca is loaded as a *larger* single integer. This patch also does not address some of the code quality issues with the FCA-splitting. Those don't actually impede any optimizations really, but they're on my list to clean up. [1]: Pedantic footnote: for those concerned about memory model issues here, this is safe. For the alloca to be promotable, it cannot escape or have any use of its address that could allow these loads or stores to be racing. Thus, widening is always safe. llvm-svn: 165928
2012-10-15 10:40:30 +02:00
store float 0.0, float* %ptr
Introduce a new SROA implementation. This is essentially a ground up re-think of the SROA pass in LLVM. It was initially inspired by a few problems with the existing pass: - It is subject to the bane of my existence in optimizations: arbitrary thresholds. - It is overly conservative about which constructs can be split and promoted. - The vector value replacement aspect is separated from the splitting logic, missing many opportunities where splitting and vector value formation can work together. - The splitting is entirely based around the underlying type of the alloca, despite this type often having little to do with the reality of how that memory is used. This is especially prevelant with unions and base classes where we tail-pack derived members. - When splitting fails (often due to the thresholds), the vector value replacement (again because it is separate) can kick in for preposterous cases where we simply should have split the value. This results in forming i1024 and i2048 integer "bit vectors" that tremendously slow down subsequnet IR optimizations (due to large APInts) and impede the backend's lowering. The new design takes an approach that fundamentally is not susceptible to many of these problems. It is the result of a discusison between myself and Duncan Sands over IRC about how to premptively avoid these types of problems and how to do SROA in a more principled way. Since then, it has evolved and grown, but this remains an important aspect: it fixes real world problems with the SROA process today. First, the transform of SROA actually has little to do with replacement. It has more to do with splitting. The goal is to take an aggregate alloca and form a composition of scalar allocas which can replace it and will be most suitable to the eventual replacement by scalar SSA values. The actual replacement is performed by mem2reg (and in the future SSAUpdater). The splitting is divided into four phases. The first phase is an analysis of the uses of the alloca. This phase recursively walks uses, building up a dense datastructure representing the ranges of the alloca's memory actually used and checking for uses which inhibit any aspects of the transform such as the escape of a pointer. Once we have a mapping of the ranges of the alloca used by individual operations, we compute a partitioning of the used ranges. Some uses are inherently splittable (such as memcpy and memset), while scalar uses are not splittable. The goal is to build a partitioning that has the minimum number of splits while placing each unsplittable use in its own partition. Overlapping unsplittable uses belong to the same partition. This is the target split of the aggregate alloca, and it maximizes the number of scalar accesses which become accesses to their own alloca and candidates for promotion. Third, we re-walk the uses of the alloca and assign each specific memory access to all the partitions touched so that we have dense use-lists for each partition. Finally, we build a new, smaller alloca for each partition and rewrite each use of that partition to use the new alloca. During this phase the pass will also work very hard to transform uses of an alloca into a form suitable for promotion, including forming vector operations, speculating loads throguh PHI nodes and selects, etc. After splitting is complete, each newly refined alloca that is a candidate for promotion to a scalar SSA value is run through mem2reg. There are lots of reasonably detailed comments in the source code about the design and algorithms, and I'm going to be trying to improve them in subsequent commits to ensure this is well documented, as the new pass is in many ways more complex than the old one. Some of this is still a WIP, but the current state is reasonbly stable. It has passed bootstrap, the nightly test suite, and Duncan has run it successfully through the ACATS and DragonEgg test suites. That said, it remains behind a default-off flag until the last few pieces are in place, and full testing can be done. Specific areas I'm looking at next: - Improved comments and some code cleanup from reviews. - SSAUpdater and enabling this pass inside the CGSCC pass manager. - Some datastructure tuning and compile-time measurements. - More aggressive FCA splitting and vector formation. Many thanks to Duncan Sands for the thorough final review, as well as Benjamin Kramer for lots of review during the process of writing this pass, and Daniel Berlin for reviewing the data structures and algorithms and general theory of the pass. Also, several other people on IRC, over lunch tables, etc for lots of feedback and advice. llvm-svn: 163883
2012-09-14 11:22:59 +02:00
%test = icmp ne i32 %b, 0
First major step toward addressing PR14059. This teaches SROA to handle cases where we have partial integer loads and stores to an otherwise promotable alloca to widen[1] those loads and stores to cover the entire alloca and bitcast them into the appropriate type such that promotion can proceed. These partial loads and stores stem from an annoying confluence of ARM's calling convention and ABI lowering and the FCA pre-splitting which takes place in SROA. Clang lowers a { double, double } in-register function argument as a [4 x i32] function argument to ensure it is placed into integer 32-bit registers (a really unnerving implicit contract between Clang and the ARM backend I would add). This results in a FCA load of [4 x i32]* from the { double, double } alloca, and SROA decomposes this into a sequence of i32 loads and stores. Inlining proceeds, code gets folded, but at the end of the day, we still have i32 stores to the low and high halves of a double alloca. Widening these to be i64 operations, and bitcasting them to double prior to loading or storing allows promotion to proceed for these allocas. I looked quite a bit changing the IR which Clang produces for this case to be more friendly, but small changes seem unlikely to help. I think the best representation we could use currently would be to pass 4 i32 arguments thereby avoiding any FCAs, but that would still require this fix. It seems like it might eventually be nice to somehow encode the ABI register selection choices outside of the parameter type system so that the parameter can be a { double, double }, but the CC register annotations indicate that this should be passed via 4 integer registers. This patch does not address the second problem in PR14059, which is the reverse: when a struct alloca is loaded as a *larger* single integer. This patch also does not address some of the code quality issues with the FCA-splitting. Those don't actually impede any optimizations really, but they're on my list to clean up. [1]: Pedantic footnote: for those concerned about memory model issues here, this is safe. For the alloca to be promotable, it cannot escape or have any use of its address that could allow these loads or stores to be racing. Thus, widening is always safe. llvm-svn: 165928
2012-10-15 10:40:30 +02:00
%bitcast = bitcast double* %f to float*
%select = select i1 %test, float* %bitcast, float* %ptr
%loaded = load float* %select, align 4
ret float %loaded
Introduce a new SROA implementation. This is essentially a ground up re-think of the SROA pass in LLVM. It was initially inspired by a few problems with the existing pass: - It is subject to the bane of my existence in optimizations: arbitrary thresholds. - It is overly conservative about which constructs can be split and promoted. - The vector value replacement aspect is separated from the splitting logic, missing many opportunities where splitting and vector value formation can work together. - The splitting is entirely based around the underlying type of the alloca, despite this type often having little to do with the reality of how that memory is used. This is especially prevelant with unions and base classes where we tail-pack derived members. - When splitting fails (often due to the thresholds), the vector value replacement (again because it is separate) can kick in for preposterous cases where we simply should have split the value. This results in forming i1024 and i2048 integer "bit vectors" that tremendously slow down subsequnet IR optimizations (due to large APInts) and impede the backend's lowering. The new design takes an approach that fundamentally is not susceptible to many of these problems. It is the result of a discusison between myself and Duncan Sands over IRC about how to premptively avoid these types of problems and how to do SROA in a more principled way. Since then, it has evolved and grown, but this remains an important aspect: it fixes real world problems with the SROA process today. First, the transform of SROA actually has little to do with replacement. It has more to do with splitting. The goal is to take an aggregate alloca and form a composition of scalar allocas which can replace it and will be most suitable to the eventual replacement by scalar SSA values. The actual replacement is performed by mem2reg (and in the future SSAUpdater). The splitting is divided into four phases. The first phase is an analysis of the uses of the alloca. This phase recursively walks uses, building up a dense datastructure representing the ranges of the alloca's memory actually used and checking for uses which inhibit any aspects of the transform such as the escape of a pointer. Once we have a mapping of the ranges of the alloca used by individual operations, we compute a partitioning of the used ranges. Some uses are inherently splittable (such as memcpy and memset), while scalar uses are not splittable. The goal is to build a partitioning that has the minimum number of splits while placing each unsplittable use in its own partition. Overlapping unsplittable uses belong to the same partition. This is the target split of the aggregate alloca, and it maximizes the number of scalar accesses which become accesses to their own alloca and candidates for promotion. Third, we re-walk the uses of the alloca and assign each specific memory access to all the partitions touched so that we have dense use-lists for each partition. Finally, we build a new, smaller alloca for each partition and rewrite each use of that partition to use the new alloca. During this phase the pass will also work very hard to transform uses of an alloca into a form suitable for promotion, including forming vector operations, speculating loads throguh PHI nodes and selects, etc. After splitting is complete, each newly refined alloca that is a candidate for promotion to a scalar SSA value is run through mem2reg. There are lots of reasonably detailed comments in the source code about the design and algorithms, and I'm going to be trying to improve them in subsequent commits to ensure this is well documented, as the new pass is in many ways more complex than the old one. Some of this is still a WIP, but the current state is reasonbly stable. It has passed bootstrap, the nightly test suite, and Duncan has run it successfully through the ACATS and DragonEgg test suites. That said, it remains behind a default-off flag until the last few pieces are in place, and full testing can be done. Specific areas I'm looking at next: - Improved comments and some code cleanup from reviews. - SSAUpdater and enabling this pass inside the CGSCC pass manager. - Some datastructure tuning and compile-time measurements. - More aggressive FCA splitting and vector formation. Many thanks to Duncan Sands for the thorough final review, as well as Benjamin Kramer for lots of review during the process of writing this pass, and Daniel Berlin for reviewing the data structures and algorithms and general theory of the pass. Also, several other people on IRC, over lunch tables, etc for lots of feedback and advice. llvm-svn: 163883
2012-09-14 11:22:59 +02:00
}
define i32 @test12(i32 %x, i32* %p) {
; Ensure we don't crash or fail to nuke dead selects of allocas if no load is
; never found.
Update Transforms tests to use CHECK-LABEL for easier debugging. No functionality change. This update was done with the following bash script: find test/Transforms -name "*.ll" | \ while read NAME; do echo "$NAME" if ! grep -q "^; *RUN: *llc" $NAME; then TEMP=`mktemp -t temp` cp $NAME $TEMP sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \ while read FUNC; do sed -i '' "s/;\(.*\)\([A-Za-z0-9_]*\):\( *\)@$FUNC\([( ]*\)\$/;\1\2-LABEL:\3@$FUNC(/g" $TEMP done mv $TEMP $NAME fi done llvm-svn: 186268
2013-07-14 03:42:54 +02:00
; CHECK-LABEL: @test12(
Introduce a new SROA implementation. This is essentially a ground up re-think of the SROA pass in LLVM. It was initially inspired by a few problems with the existing pass: - It is subject to the bane of my existence in optimizations: arbitrary thresholds. - It is overly conservative about which constructs can be split and promoted. - The vector value replacement aspect is separated from the splitting logic, missing many opportunities where splitting and vector value formation can work together. - The splitting is entirely based around the underlying type of the alloca, despite this type often having little to do with the reality of how that memory is used. This is especially prevelant with unions and base classes where we tail-pack derived members. - When splitting fails (often due to the thresholds), the vector value replacement (again because it is separate) can kick in for preposterous cases where we simply should have split the value. This results in forming i1024 and i2048 integer "bit vectors" that tremendously slow down subsequnet IR optimizations (due to large APInts) and impede the backend's lowering. The new design takes an approach that fundamentally is not susceptible to many of these problems. It is the result of a discusison between myself and Duncan Sands over IRC about how to premptively avoid these types of problems and how to do SROA in a more principled way. Since then, it has evolved and grown, but this remains an important aspect: it fixes real world problems with the SROA process today. First, the transform of SROA actually has little to do with replacement. It has more to do with splitting. The goal is to take an aggregate alloca and form a composition of scalar allocas which can replace it and will be most suitable to the eventual replacement by scalar SSA values. The actual replacement is performed by mem2reg (and in the future SSAUpdater). The splitting is divided into four phases. The first phase is an analysis of the uses of the alloca. This phase recursively walks uses, building up a dense datastructure representing the ranges of the alloca's memory actually used and checking for uses which inhibit any aspects of the transform such as the escape of a pointer. Once we have a mapping of the ranges of the alloca used by individual operations, we compute a partitioning of the used ranges. Some uses are inherently splittable (such as memcpy and memset), while scalar uses are not splittable. The goal is to build a partitioning that has the minimum number of splits while placing each unsplittable use in its own partition. Overlapping unsplittable uses belong to the same partition. This is the target split of the aggregate alloca, and it maximizes the number of scalar accesses which become accesses to their own alloca and candidates for promotion. Third, we re-walk the uses of the alloca and assign each specific memory access to all the partitions touched so that we have dense use-lists for each partition. Finally, we build a new, smaller alloca for each partition and rewrite each use of that partition to use the new alloca. During this phase the pass will also work very hard to transform uses of an alloca into a form suitable for promotion, including forming vector operations, speculating loads throguh PHI nodes and selects, etc. After splitting is complete, each newly refined alloca that is a candidate for promotion to a scalar SSA value is run through mem2reg. There are lots of reasonably detailed comments in the source code about the design and algorithms, and I'm going to be trying to improve them in subsequent commits to ensure this is well documented, as the new pass is in many ways more complex than the old one. Some of this is still a WIP, but the current state is reasonbly stable. It has passed bootstrap, the nightly test suite, and Duncan has run it successfully through the ACATS and DragonEgg test suites. That said, it remains behind a default-off flag until the last few pieces are in place, and full testing can be done. Specific areas I'm looking at next: - Improved comments and some code cleanup from reviews. - SSAUpdater and enabling this pass inside the CGSCC pass manager. - Some datastructure tuning and compile-time measurements. - More aggressive FCA splitting and vector formation. Many thanks to Duncan Sands for the thorough final review, as well as Benjamin Kramer for lots of review during the process of writing this pass, and Daniel Berlin for reviewing the data structures and algorithms and general theory of the pass. Also, several other people on IRC, over lunch tables, etc for lots of feedback and advice. llvm-svn: 163883
2012-09-14 11:22:59 +02:00
; CHECK-NOT: alloca
; CHECK-NOT: select
; CHECK: ret i32 %x
entry:
%a = alloca i32
store i32 %x, i32* %a
%dead = select i1 undef, i32* %a, i32* %p
%load = load i32* %a
ret i32 %load
}
define i32 @test13(i32 %x, i32* %p) {
; Ensure we don't crash or fail to nuke dead phis of allocas if no load is ever
; found.
Update Transforms tests to use CHECK-LABEL for easier debugging. No functionality change. This update was done with the following bash script: find test/Transforms -name "*.ll" | \ while read NAME; do echo "$NAME" if ! grep -q "^; *RUN: *llc" $NAME; then TEMP=`mktemp -t temp` cp $NAME $TEMP sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \ while read FUNC; do sed -i '' "s/;\(.*\)\([A-Za-z0-9_]*\):\( *\)@$FUNC\([( ]*\)\$/;\1\2-LABEL:\3@$FUNC(/g" $TEMP done mv $TEMP $NAME fi done llvm-svn: 186268
2013-07-14 03:42:54 +02:00
; CHECK-LABEL: @test13(
Introduce a new SROA implementation. This is essentially a ground up re-think of the SROA pass in LLVM. It was initially inspired by a few problems with the existing pass: - It is subject to the bane of my existence in optimizations: arbitrary thresholds. - It is overly conservative about which constructs can be split and promoted. - The vector value replacement aspect is separated from the splitting logic, missing many opportunities where splitting and vector value formation can work together. - The splitting is entirely based around the underlying type of the alloca, despite this type often having little to do with the reality of how that memory is used. This is especially prevelant with unions and base classes where we tail-pack derived members. - When splitting fails (often due to the thresholds), the vector value replacement (again because it is separate) can kick in for preposterous cases where we simply should have split the value. This results in forming i1024 and i2048 integer "bit vectors" that tremendously slow down subsequnet IR optimizations (due to large APInts) and impede the backend's lowering. The new design takes an approach that fundamentally is not susceptible to many of these problems. It is the result of a discusison between myself and Duncan Sands over IRC about how to premptively avoid these types of problems and how to do SROA in a more principled way. Since then, it has evolved and grown, but this remains an important aspect: it fixes real world problems with the SROA process today. First, the transform of SROA actually has little to do with replacement. It has more to do with splitting. The goal is to take an aggregate alloca and form a composition of scalar allocas which can replace it and will be most suitable to the eventual replacement by scalar SSA values. The actual replacement is performed by mem2reg (and in the future SSAUpdater). The splitting is divided into four phases. The first phase is an analysis of the uses of the alloca. This phase recursively walks uses, building up a dense datastructure representing the ranges of the alloca's memory actually used and checking for uses which inhibit any aspects of the transform such as the escape of a pointer. Once we have a mapping of the ranges of the alloca used by individual operations, we compute a partitioning of the used ranges. Some uses are inherently splittable (such as memcpy and memset), while scalar uses are not splittable. The goal is to build a partitioning that has the minimum number of splits while placing each unsplittable use in its own partition. Overlapping unsplittable uses belong to the same partition. This is the target split of the aggregate alloca, and it maximizes the number of scalar accesses which become accesses to their own alloca and candidates for promotion. Third, we re-walk the uses of the alloca and assign each specific memory access to all the partitions touched so that we have dense use-lists for each partition. Finally, we build a new, smaller alloca for each partition and rewrite each use of that partition to use the new alloca. During this phase the pass will also work very hard to transform uses of an alloca into a form suitable for promotion, including forming vector operations, speculating loads throguh PHI nodes and selects, etc. After splitting is complete, each newly refined alloca that is a candidate for promotion to a scalar SSA value is run through mem2reg. There are lots of reasonably detailed comments in the source code about the design and algorithms, and I'm going to be trying to improve them in subsequent commits to ensure this is well documented, as the new pass is in many ways more complex than the old one. Some of this is still a WIP, but the current state is reasonbly stable. It has passed bootstrap, the nightly test suite, and Duncan has run it successfully through the ACATS and DragonEgg test suites. That said, it remains behind a default-off flag until the last few pieces are in place, and full testing can be done. Specific areas I'm looking at next: - Improved comments and some code cleanup from reviews. - SSAUpdater and enabling this pass inside the CGSCC pass manager. - Some datastructure tuning and compile-time measurements. - More aggressive FCA splitting and vector formation. Many thanks to Duncan Sands for the thorough final review, as well as Benjamin Kramer for lots of review during the process of writing this pass, and Daniel Berlin for reviewing the data structures and algorithms and general theory of the pass. Also, several other people on IRC, over lunch tables, etc for lots of feedback and advice. llvm-svn: 163883
2012-09-14 11:22:59 +02:00
; CHECK-NOT: alloca
; CHECK-NOT: phi
; CHECK: ret i32 %x
entry:
%a = alloca i32
store i32 %x, i32* %a
br label %loop
loop:
%phi = phi i32* [ %p, %entry ], [ %a, %loop ]
br i1 undef, label %loop, label %exit
exit:
%load = load i32* %a
ret i32 %load
}
Fix a case where SROA did not correctly detect dead PHI or selects due to chains or cycles between PHIs and/or selects. Also add a couple of really nice test cases reduced from Kostya's reports in PR13905 and PR13906. Both are fixed by this patch. llvm-svn: 164596
2012-09-25 12:03:40 +02:00
Fix a problem I introduced in r187029 where we would over-eagerly schedule an alloca for another iteration in SROA. This only showed up with a mixture of promotable and unpromotable selects and phis. Added a test case for this. llvm-svn: 187031
2013-07-24 14:12:17 +02:00
define i32 @test14(i1 %b1, i1 %b2, i32* %ptr) {
; Check for problems when there are both selects and phis and one is
; speculatable toward promotion but the other is not. That should block all of
; the speculation.
; CHECK-LABEL: @test14(
; CHECK: alloca
; CHECK: alloca
; CHECK: select
; CHECK: phi
; CHECK: phi
; CHECK: select
; CHECK: ret i32
entry:
%f = alloca i32
%g = alloca i32
store i32 0, i32* %f
store i32 0, i32* %g
%f.select = select i1 %b1, i32* %f, i32* %ptr
br i1 %b2, label %then, label %else
then:
br label %exit
else:
br label %exit
exit:
%f.phi = phi i32* [ %f, %then ], [ %f.select, %else ]
%g.phi = phi i32* [ %g, %then ], [ %ptr, %else ]
%f.loaded = load i32* %f.phi
%g.select = select i1 %b1, i32* %g, i32* %g.phi
%g.loaded = load i32* %g.select
%result = add i32 %f.loaded, %g.loaded
ret i32 %result
}
Fix a case where SROA did not correctly detect dead PHI or selects due to chains or cycles between PHIs and/or selects. Also add a couple of really nice test cases reduced from Kostya's reports in PR13905 and PR13906. Both are fixed by this patch. llvm-svn: 164596
2012-09-25 12:03:40 +02:00
define i32 @PR13905() {
; Check a pattern where we have a chain of dead phi nodes to ensure they are
; deleted and promotion can proceed.
Update Transforms tests to use CHECK-LABEL for easier debugging. No functionality change. This update was done with the following bash script: find test/Transforms -name "*.ll" | \ while read NAME; do echo "$NAME" if ! grep -q "^; *RUN: *llc" $NAME; then TEMP=`mktemp -t temp` cp $NAME $TEMP sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \ while read FUNC; do sed -i '' "s/;\(.*\)\([A-Za-z0-9_]*\):\( *\)@$FUNC\([( ]*\)\$/;\1\2-LABEL:\3@$FUNC(/g" $TEMP done mv $TEMP $NAME fi done llvm-svn: 186268
2013-07-14 03:42:54 +02:00
; CHECK-LABEL: @PR13905(
Fix a case where SROA did not correctly detect dead PHI or selects due to chains or cycles between PHIs and/or selects. Also add a couple of really nice test cases reduced from Kostya's reports in PR13905 and PR13906. Both are fixed by this patch. llvm-svn: 164596
2012-09-25 12:03:40 +02:00
; CHECK-NOT: alloca i32
; CHECK: ret i32 undef
entry:
%h = alloca i32
store i32 0, i32* %h
br i1 undef, label %loop1, label %exit
loop1:
%phi1 = phi i32* [ null, %entry ], [ %h, %loop1 ], [ %h, %loop2 ]
br i1 undef, label %loop1, label %loop2
loop2:
br i1 undef, label %loop1, label %exit
exit:
%phi2 = phi i32* [ %phi1, %loop2 ], [ null, %entry ]
ret i32 undef
}
define i32 @PR13906() {
; Another pattern which can lead to crashes due to failing to clear out dead
; PHI nodes or select nodes. This triggers subtly differently from the above
; cases because the PHI node is (recursively) alive, but the select is dead.
Update Transforms tests to use CHECK-LABEL for easier debugging. No functionality change. This update was done with the following bash script: find test/Transforms -name "*.ll" | \ while read NAME; do echo "$NAME" if ! grep -q "^; *RUN: *llc" $NAME; then TEMP=`mktemp -t temp` cp $NAME $TEMP sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \ while read FUNC; do sed -i '' "s/;\(.*\)\([A-Za-z0-9_]*\):\( *\)@$FUNC\([( ]*\)\$/;\1\2-LABEL:\3@$FUNC(/g" $TEMP done mv $TEMP $NAME fi done llvm-svn: 186268
2013-07-14 03:42:54 +02:00
; CHECK-LABEL: @PR13906(
Fix a case where SROA did not correctly detect dead PHI or selects due to chains or cycles between PHIs and/or selects. Also add a couple of really nice test cases reduced from Kostya's reports in PR13905 and PR13906. Both are fixed by this patch. llvm-svn: 164596
2012-09-25 12:03:40 +02:00
; CHECK-NOT: alloca
entry:
%c = alloca i32
store i32 0, i32* %c
br label %for.cond
for.cond:
%d.0 = phi i32* [ undef, %entry ], [ %c, %if.then ], [ %d.0, %for.cond ]
br i1 undef, label %if.then, label %for.cond
if.then:
%tmpcast.d.0 = select i1 undef, i32* %c, i32* %d.0
br label %for.cond
}
Fix PR14132 and handle OOB loads speculated throuh PHI nodes. The issue is that we may end up with newly OOB loads when speculating a load into the predecessors of a PHI node, and this confuses the new integer splitting logic in some cases, triggering an assertion failure. In fact, the branch in question must be dead code as it loads from a too-narrow alloca. Add code to handle this gracefully and leave the requisite FIXMEs for both optimizing more aggressively and doing more to aid sanitizing invalid code which triggers these patterns. llvm-svn: 168361
2012-11-20 11:02:19 +01:00
define i64 @PR14132(i1 %flag) {
Update Transforms tests to use CHECK-LABEL for easier debugging. No functionality change. This update was done with the following bash script: find test/Transforms -name "*.ll" | \ while read NAME; do echo "$NAME" if ! grep -q "^; *RUN: *llc" $NAME; then TEMP=`mktemp -t temp` cp $NAME $TEMP sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \ while read FUNC; do sed -i '' "s/;\(.*\)\([A-Za-z0-9_]*\):\( *\)@$FUNC\([( ]*\)\$/;\1\2-LABEL:\3@$FUNC(/g" $TEMP done mv $TEMP $NAME fi done llvm-svn: 186268
2013-07-14 03:42:54 +02:00
; CHECK-LABEL: @PR14132(
Fix PR14132 and handle OOB loads speculated throuh PHI nodes. The issue is that we may end up with newly OOB loads when speculating a load into the predecessors of a PHI node, and this confuses the new integer splitting logic in some cases, triggering an assertion failure. In fact, the branch in question must be dead code as it loads from a too-narrow alloca. Add code to handle this gracefully and leave the requisite FIXMEs for both optimizing more aggressively and doing more to aid sanitizing invalid code which triggers these patterns. llvm-svn: 168361
2012-11-20 11:02:19 +01:00
; Here we form a PHI-node by promoting the pointer alloca first, and then in
; order to promote the other two allocas, we speculate the load of the
; now-phi-node-pointer. In doing so we end up loading a 64-bit value from an i8
PR14972: SROA vs. GVN exposed a really bad bug in SROA. The fundamental problem is that SROA didn't allow for overly wide loads where the bits past the end of the alloca were masked away and the load was sufficiently aligned to ensure there is no risk of page fault, or other trapping behavior. With such widened loads, SROA would delete the load entirely rather than clamping it to the size of the alloca in order to allow mem2reg to fire. This was exposed by a test case that neatly arranged for GVN to run first, widening certain loads, followed by an inline step, and then SROA which miscompiles the code. However, I see no reason why this hasn't been plaguing us in other contexts. It seems deeply broken. Diagnosing all of the above took all of 10 minutes of debugging. The really annoying aspect is that fixing this completely breaks the pass. ;] There was an implicit reliance on the fact that no loads or stores extended past the alloca once we decided to rewrite them in the final stage of SROA. This was used to encode information about whether the loads and stores had been split across multiple partitions of the original alloca. That required threading explicit tracking of whether a *use* of a partition is split across multiple partitions. Once that was done, another problem arose: we allowed splitting of integer loads and stores iff they were loads and stores to the entire alloca. This is a really arbitrary limitation, and splitting at least some integer loads and stores is crucial to maximize promotion opportunities. My first attempt was to start removing the restriction entirely, but currently that does Very Bad Things by causing *many* common alloca patterns to be fully decomposed into i8 operations and lots of or-ing together to produce larger integers on demand. The code bloat is terrifying. That is still the right end-goal, but substantial work must be done to either merge partitions or ensure that small i8 values are eagerly merged in some other pass. Sadly, figuring all this out took essentially all the time and effort here. So the end result is that we allow splitting only when the load or store at least covers the alloca. That ensures widened loads and stores don't hurt SROA, and that we don't rampantly decompose operations more than we have previously. All of this was already fairly well tested, and so I've just updated the tests to cover the wide load behavior. I can add a test that crafts the pass ordering magic which caused the original PR, but that seems really brittle and to provide little benefit. The fundamental problem is that widened loads should Just Work. llvm-svn: 177055
2013-03-14 12:32:24 +01:00
; alloca. While this is a bit dubious, we were asserting on trying to
; rewrite it. The trick is that the code using the value may carefully take
; steps to only use the not-undef bits, and so we need to at least loosely
; support this..
Fix PR14132 and handle OOB loads speculated throuh PHI nodes. The issue is that we may end up with newly OOB loads when speculating a load into the predecessors of a PHI node, and this confuses the new integer splitting logic in some cases, triggering an assertion failure. In fact, the branch in question must be dead code as it loads from a too-narrow alloca. Add code to handle this gracefully and leave the requisite FIXMEs for both optimizing more aggressively and doing more to aid sanitizing invalid code which triggers these patterns. llvm-svn: 168361
2012-11-20 11:02:19 +01:00
entry:
%a = alloca i64
%b = alloca i8
%ptr = alloca i64*
; CHECK-NOT: alloca
%ptr.cast = bitcast i64** %ptr to i8**
store i64 0, i64* %a
store i8 1, i8* %b
store i64* %a, i64** %ptr
br i1 %flag, label %if.then, label %if.end
if.then:
store i8* %b, i8** %ptr.cast
br label %if.end
PR14972: SROA vs. GVN exposed a really bad bug in SROA. The fundamental problem is that SROA didn't allow for overly wide loads where the bits past the end of the alloca were masked away and the load was sufficiently aligned to ensure there is no risk of page fault, or other trapping behavior. With such widened loads, SROA would delete the load entirely rather than clamping it to the size of the alloca in order to allow mem2reg to fire. This was exposed by a test case that neatly arranged for GVN to run first, widening certain loads, followed by an inline step, and then SROA which miscompiles the code. However, I see no reason why this hasn't been plaguing us in other contexts. It seems deeply broken. Diagnosing all of the above took all of 10 minutes of debugging. The really annoying aspect is that fixing this completely breaks the pass. ;] There was an implicit reliance on the fact that no loads or stores extended past the alloca once we decided to rewrite them in the final stage of SROA. This was used to encode information about whether the loads and stores had been split across multiple partitions of the original alloca. That required threading explicit tracking of whether a *use* of a partition is split across multiple partitions. Once that was done, another problem arose: we allowed splitting of integer loads and stores iff they were loads and stores to the entire alloca. This is a really arbitrary limitation, and splitting at least some integer loads and stores is crucial to maximize promotion opportunities. My first attempt was to start removing the restriction entirely, but currently that does Very Bad Things by causing *many* common alloca patterns to be fully decomposed into i8 operations and lots of or-ing together to produce larger integers on demand. The code bloat is terrifying. That is still the right end-goal, but substantial work must be done to either merge partitions or ensure that small i8 values are eagerly merged in some other pass. Sadly, figuring all this out took essentially all the time and effort here. So the end result is that we allow splitting only when the load or store at least covers the alloca. That ensures widened loads and stores don't hurt SROA, and that we don't rampantly decompose operations more than we have previously. All of this was already fairly well tested, and so I've just updated the tests to cover the wide load behavior. I can add a test that crafts the pass ordering magic which caused the original PR, but that seems really brittle and to provide little benefit. The fundamental problem is that widened loads should Just Work. llvm-svn: 177055
2013-03-14 12:32:24 +01:00
; CHECK-NOT: store
; CHECK: %[[ext:.*]] = zext i8 1 to i64
Fix PR14132 and handle OOB loads speculated throuh PHI nodes. The issue is that we may end up with newly OOB loads when speculating a load into the predecessors of a PHI node, and this confuses the new integer splitting logic in some cases, triggering an assertion failure. In fact, the branch in question must be dead code as it loads from a too-narrow alloca. Add code to handle this gracefully and leave the requisite FIXMEs for both optimizing more aggressively and doing more to aid sanitizing invalid code which triggers these patterns. llvm-svn: 168361
2012-11-20 11:02:19 +01:00
if.end:
%tmp = load i64** %ptr
%result = load i64* %tmp
; CHECK-NOT: load
PR14972: SROA vs. GVN exposed a really bad bug in SROA. The fundamental problem is that SROA didn't allow for overly wide loads where the bits past the end of the alloca were masked away and the load was sufficiently aligned to ensure there is no risk of page fault, or other trapping behavior. With such widened loads, SROA would delete the load entirely rather than clamping it to the size of the alloca in order to allow mem2reg to fire. This was exposed by a test case that neatly arranged for GVN to run first, widening certain loads, followed by an inline step, and then SROA which miscompiles the code. However, I see no reason why this hasn't been plaguing us in other contexts. It seems deeply broken. Diagnosing all of the above took all of 10 minutes of debugging. The really annoying aspect is that fixing this completely breaks the pass. ;] There was an implicit reliance on the fact that no loads or stores extended past the alloca once we decided to rewrite them in the final stage of SROA. This was used to encode information about whether the loads and stores had been split across multiple partitions of the original alloca. That required threading explicit tracking of whether a *use* of a partition is split across multiple partitions. Once that was done, another problem arose: we allowed splitting of integer loads and stores iff they were loads and stores to the entire alloca. This is a really arbitrary limitation, and splitting at least some integer loads and stores is crucial to maximize promotion opportunities. My first attempt was to start removing the restriction entirely, but currently that does Very Bad Things by causing *many* common alloca patterns to be fully decomposed into i8 operations and lots of or-ing together to produce larger integers on demand. The code bloat is terrifying. That is still the right end-goal, but substantial work must be done to either merge partitions or ensure that small i8 values are eagerly merged in some other pass. Sadly, figuring all this out took essentially all the time and effort here. So the end result is that we allow splitting only when the load or store at least covers the alloca. That ensures widened loads and stores don't hurt SROA, and that we don't rampantly decompose operations more than we have previously. All of this was already fairly well tested, and so I've just updated the tests to cover the wide load behavior. I can add a test that crafts the pass ordering magic which caused the original PR, but that seems really brittle and to provide little benefit. The fundamental problem is that widened loads should Just Work. llvm-svn: 177055
2013-03-14 12:32:24 +01:00
; CHECK: %[[result:.*]] = phi i64 [ %[[ext]], %if.then ], [ 0, %entry ]
Fix PR14132 and handle OOB loads speculated throuh PHI nodes. The issue is that we may end up with newly OOB loads when speculating a load into the predecessors of a PHI node, and this confuses the new integer splitting logic in some cases, triggering an assertion failure. In fact, the branch in question must be dead code as it loads from a too-narrow alloca. Add code to handle this gracefully and leave the requisite FIXMEs for both optimizing more aggressively and doing more to aid sanitizing invalid code which triggers these patterns. llvm-svn: 168361
2012-11-20 11:02:19 +01:00
ret i64 %result
; CHECK-NEXT: ret i64 %[[result]]
}
Fix PR16687 where we were incorrectly promoting an alloca that had pending speculation for a phi node. The problem here is that we were using growth of the specluation set as an indicator of whether speculation would occur, and if the phi node is already in the set we don't see it grow. This is a symptom of the fact that this signal is a total hack. Unfortunately, I couldn't really come up with a non-hacky way of signaling that promotion remains valid *after* speculation occurs, such that we only speculate when all else looks good for promotion. In the end, I went with at least a much more explicit approach of doing the work of queuing inside the phi and select processing and setting a preposterously named flag to convey that we're in the special state of requiring speculating before promotion. Thanks to Richard Trieu and Nick Lewycky for the excellent work reducing a testcase for this from a pretty giant, nasty assert in a big application. =] The testcase was excellent. llvm-svn: 187029
2013-07-24 11:47:28 +02:00
define float @PR16687(i64 %x, i1 %flag) {
; CHECK-LABEL: @PR16687(
; Check that even when we try to speculate the same phi twice (in two slices)
; on an otherwise promotable construct, we don't get ahead of ourselves and try
; to promote one of the slices prior to speculating it.
entry:
%a = alloca i64, align 8
store i64 %x, i64* %a
br i1 %flag, label %then, label %else
; CHECK-NOT: alloca
; CHECK-NOT: store
; CHECK: %[[lo:.*]] = trunc i64 %x to i32
; CHECK: %[[shift:.*]] = lshr i64 %x, 32
; CHECK: %[[hi:.*]] = trunc i64 %[[shift]] to i32
then:
%a.f = bitcast i64* %a to float*
br label %end
; CHECK: %[[lo_cast:.*]] = bitcast i32 %[[lo]] to float
else:
%a.raw = bitcast i64* %a to i8*
%a.raw.4 = getelementptr i8* %a.raw, i64 4
%a.raw.4.f = bitcast i8* %a.raw.4 to float*
br label %end
; CHECK: %[[hi_cast:.*]] = bitcast i32 %[[hi]] to float
end:
%a.phi.f = phi float* [ %a.f, %then ], [ %a.raw.4.f, %else ]
%f = load float* %a.phi.f
ret float %f
; CHECK: %[[phi:.*]] = phi float [ %[[lo_cast]], %then ], [ %[[hi_cast]], %else ]
; CHECK-NOT: load
; CHECK: ret float %[[phi]]
}
[SROA] Fold a PHI node if all its incoming values are the same Summary: Fixes PR20425. During slice building, if all of the incoming values of a PHI node are the same, replace the PHI node with the common value. This simplification makes alloca's used by PHI nodes easier to promote. Test Plan: Added three more tests in phi-and-select.ll Reviewers: nlewycky, eliben, meheff, chandlerc Reviewed By: chandlerc Subscribers: zinovy.nis, hfinkel, baldrick, llvm-commits Differential Revision: http://reviews.llvm.org/D4659 llvm-svn: 216299
2014-08-23 00:45:57 +02:00
; Verifies we fixed PR20425. We should be able to promote all alloca's to
; registers in this test.
;
; %0 = slice
; %1 = slice
; %2 = phi(%0, %1) // == slice
define float @simplify_phi_nodes_that_equal_slice(i1 %cond, float* %temp) {
; CHECK-LABEL: @simplify_phi_nodes_that_equal_slice(
entry:
%arr = alloca [4 x float], align 4
; CHECK-NOT: alloca
br i1 %cond, label %then, label %else
then:
%0 = getelementptr inbounds [4 x float]* %arr, i64 0, i64 3
store float 1.000000e+00, float* %0, align 4
br label %merge
else:
%1 = getelementptr inbounds [4 x float]* %arr, i64 0, i64 3
store float 2.000000e+00, float* %1, align 4
br label %merge
merge:
%2 = phi float* [ %0, %then ], [ %1, %else ]
store float 0.000000e+00, float* %temp, align 4
%3 = load float* %2, align 4
ret float %3
}
; A slightly complicated example for PR20425.
;
; %0 = slice
; %1 = phi(%0) // == slice
; %2 = slice
; %3 = phi(%1, %2) // == slice
define float @simplify_phi_nodes_that_equal_slice_2(i1 %cond, float* %temp) {
; CHECK-LABEL: @simplify_phi_nodes_that_equal_slice_2(
entry:
%arr = alloca [4 x float], align 4
; CHECK-NOT: alloca
br i1 %cond, label %then, label %else
then:
%0 = getelementptr inbounds [4 x float]* %arr, i64 0, i64 3
store float 1.000000e+00, float* %0, align 4
br label %then2
then2:
%1 = phi float* [ %0, %then ]
store float 2.000000e+00, float* %1, align 4
br label %merge
else:
%2 = getelementptr inbounds [4 x float]* %arr, i64 0, i64 3
store float 3.000000e+00, float* %2, align 4
br label %merge
merge:
%3 = phi float* [ %1, %then2 ], [ %2, %else ]
store float 0.000000e+00, float* %temp, align 4
%4 = load float* %3, align 4
ret float %4
}
SROA: Don't insert instructions before a PHI SROA may decide that it needs to insert a bitcast and would set it's insertion point before a PHI. This will create an invalid module right quick. Instead, choose the first insertion point in the basic block that holds our PHI. This fixes PR20822. Differential Revision: http://reviews.llvm.org/D5141 llvm-svn: 216891
2014-09-01 23:20:14 +02:00
%struct.S = type { i32 }
; Verifies we fixed PR20822. We have a foldable PHI feeding a speculatable PHI
; which requires the rewriting of the speculated PHI to handle insertion
; when the incoming pointer is itself from a PHI node. We would previously
; insert a bitcast instruction *before* a PHI, producing an invalid module;
; make sure we insert *after* the first non-PHI instruction.
define void @PR20822() {
; CHECK-LABEL: @PR20822(
entry:
%f = alloca %struct.S, align 4
; CHECK: %[[alloca:.*]] = alloca
br i1 undef, label %if.end, label %for.cond
for.cond: ; preds = %for.cond, %entry
br label %if.end
if.end: ; preds = %for.cond, %entry
%f2 = phi %struct.S* [ %f, %entry ], [ %f, %for.cond ]
; CHECK: phi i32
; CHECK: %[[cast:.*]] = bitcast i32* %[[alloca]] to %struct.S*
phi i32 [ undef, %entry ], [ undef, %for.cond ]
br i1 undef, label %if.then5, label %if.then2
if.then2: ; preds = %if.end
br label %if.then5
if.then5: ; preds = %if.then2, %if.end
%f1 = phi %struct.S* [ undef, %if.then2 ], [ %f2, %if.end ]
; CHECK: phi {{.*}} %[[cast]]
store %struct.S undef, %struct.S* %f1, align 4
ret void
}
Reference in New Issue Copy Permalink