1
0
mirror of https://github.com/RPCS3/llvm-mirror.git synced 2024-11-24 03:33:20 +01:00

[ARM] Allow unrolling of multi-block loops.

Before, loop unrolling was only enabled for loops with a single
block. This restriction has been removed and replaced by:
- allow a maximum of two exiting blocks,
- a four basic block limit for cores with a branch predictor.

Differential Revision: https://reviews.llvm.org/D38952

llvm-svn: 316313
This commit is contained in:
Sam Parker 2017-10-23 08:05:14 +00:00
parent aa90151997
commit 3d78ffc5c2
2 changed files with 351 additions and 16 deletions

View File

@ -586,20 +586,36 @@ void ARMTTIImpl::getUnrollingPreferences(Loop *L, ScalarEvolution &SE,
if (!ST->isMClass()) if (!ST->isMClass())
return BasicTTIImplBase::getUnrollingPreferences(L, SE, UP); return BasicTTIImplBase::getUnrollingPreferences(L, SE, UP);
// Only enable on Thumb-2 targets for simple loops.
if (!ST->isThumb2() || L->getNumBlocks() != 1)
return;
// Disable loop unrolling for Oz and Os. // Disable loop unrolling for Oz and Os.
UP.OptSizeThreshold = 0; UP.OptSizeThreshold = 0;
UP.PartialOptSizeThreshold = 0; UP.PartialOptSizeThreshold = 0;
BasicBlock *BB = L->getLoopLatch(); if (L->getHeader()->getParent()->optForSize())
if (BB->getParent()->optForSize()) return;
// Only enable on Thumb-2 targets.
if (!ST->isThumb2())
return;
SmallVector<BasicBlock*, 4> ExitingBlocks;
L->getExitingBlocks(ExitingBlocks);
DEBUG(dbgs() << "Loop has:\n"
<< "Blocks: " << L->getNumBlocks() << "\n"
<< "Exit blocks: " << ExitingBlocks.size() << "\n");
// Only allow another exit other than the latch. This acts as an early exit
// as it mirrors the profitability calculation of the runtime unroller.
if (ExitingBlocks.size() > 2)
return;
// Limit the CFG of the loop body for targets with a branch predictor.
// Allowing 4 blocks permits if-then-else diamonds in the body.
if (ST->hasBranchPredictor() && L->getNumBlocks() > 4)
return; return;
// Scan the loop: don't unroll loops with calls as this could prevent // Scan the loop: don't unroll loops with calls as this could prevent
// inlining. // inlining.
unsigned Cost = 0; unsigned Cost = 0;
for (auto *BB : L->getBlocks()) {
for (auto &I : *BB) { for (auto &I : *BB) {
if (isa<CallInst>(I) || isa<InvokeInst>(I)) { if (isa<CallInst>(I) || isa<InvokeInst>(I)) {
ImmutableCallSite CS(&I); ImmutableCallSite CS(&I);
@ -613,6 +629,9 @@ void ARMTTIImpl::getUnrollingPreferences(Loop *L, ScalarEvolution &SE,
I.value_op_end()); I.value_op_end());
Cost += getUserCost(&I, Operands); Cost += getUserCost(&I, Operands);
} }
}
DEBUG(dbgs() << "Cost of loop: " << Cost << "\n");
UP.Partial = true; UP.Partial = true;
UP.Runtime = true; UP.Runtime = true;

View File

@ -0,0 +1,316 @@
; RUN: opt -mtriple=thumbv8m.main -mcpu=cortex-m33 -loop-unroll -S < %s -o - | FileCheck %s
; RUN: opt -mtriple=thumbv7em -mcpu=cortex-m7 -loop-unroll -S < %s -o - | FileCheck %s
;CHECK-LABEL: test_three_blocks
;CHECK: for.body.epil:
;CHECK: if.then.epil:
;CHECK: for.inc.epil:
;CHECK: for.body:
;CHECK: if.then:
;CHECK: for.inc:
;CHECK: for.body.epil.1:
;CHECK: if.then.epil.1:
;CHECK: for.inc.epil.1:
;CHECK: for.body.epil.2:
;CHECK: if.then.epil.2:
;CHECK: for.inc.epil.2:
;CHECK: if.then.1:
;CHECK: for.inc.1:
;CHECK: if.then.2:
;CHECK: for.inc.2:
;CHECK: if.then.3:
;CHECK: for.inc.3:
define void @test_three_blocks(i32* nocapture %Output,
i32* nocapture readonly %Condition,
i32* nocapture readonly %Input,
i32 %MaxJ) {
entry:
%cmp8 = icmp eq i32 %MaxJ, 0
br i1 %cmp8, label %for.cond.cleanup, label %for.body.preheader
for.body.preheader: ; preds = %entry
br label %for.body
for.cond.cleanup: ; preds = %for.inc, %entry
%temp.0.lcssa = phi i32 [ 0, %entry ], [ %temp.1, %for.inc ]
store i32 %temp.0.lcssa, i32* %Output, align 4
ret void
for.body: ; preds = %for.body.preheader, %for.inc
%j.010 = phi i32 [ %inc, %for.inc ], [ 0, %for.body.preheader ]
%temp.09 = phi i32 [ %temp.1, %for.inc ], [ 0, %for.body.preheader ]
%arrayidx = getelementptr inbounds i32, i32* %Condition, i32 %j.010
%0 = load i32, i32* %arrayidx, align 4
%tobool = icmp eq i32 %0, 0
br i1 %tobool, label %for.inc, label %if.then
if.then: ; preds = %for.body
%arrayidx1 = getelementptr inbounds i32, i32* %Input, i32 %j.010
%1 = load i32, i32* %arrayidx1, align 4
%add = add i32 %1, %temp.09
br label %for.inc
for.inc: ; preds = %for.body, %if.then
%temp.1 = phi i32 [ %add, %if.then ], [ %temp.09, %for.body ]
%inc = add nuw i32 %j.010, 1
%exitcond = icmp eq i32 %inc, %MaxJ
br i1 %exitcond, label %for.cond.cleanup, label %for.body
}
;CHECK-LABEL: test_two_exits
;CHECK: for.body:
;CHECK: if.end:
;CHECK: cleanup.loopexit:
;CHECK: cleanup:
;CHECK: for.body.1:
;CHECK: if.end.1:
;CHECK: for.body.2:
;CHECK: if.end.2:
;CHECK: for.body.3:
;CHECK: if.end.3:
define void @test_two_exits(i32* nocapture %Output,
i32* nocapture readonly %Condition,
i32* nocapture readonly %Input,
i32 %MaxJ) {
entry:
%cmp14 = icmp eq i32 %MaxJ, 0
br i1 %cmp14, label %cleanup, label %for.body.preheader
for.body.preheader: ; preds = %entry
br label %for.body
for.body: ; preds = %for.body.preheader, %if.end
%j.016 = phi i32 [ %inc, %if.end ], [ 0, %for.body.preheader ]
%temp.015 = phi i32 [ %temp.0.add, %if.end ], [ 0, %for.body.preheader ]
%arrayidx = getelementptr inbounds i32, i32* %Input, i32 %j.016
%0 = load i32, i32* %arrayidx, align 4
%cmp1 = icmp ugt i32 %0, 65535
br i1 %cmp1, label %cleanup, label %if.end
if.end: ; preds = %for.body
%arrayidx2 = getelementptr inbounds i32, i32* %Condition, i32 %j.016
%1 = load i32, i32* %arrayidx2, align 4
%tobool = icmp eq i32 %1, 0
%add = select i1 %tobool, i32 0, i32 %0
%temp.0.add = add i32 %add, %temp.015
%inc = add nuw i32 %j.016, 1
%cmp = icmp ult i32 %inc, %MaxJ
br i1 %cmp, label %for.body, label %cleanup
cleanup: ; preds = %if.end, %for.body, %entry
%temp.0.lcssa = phi i32 [ 0, %entry ], [ %temp.015, %for.body ], [ %temp.0.add, %if.end ]
store i32 %temp.0.lcssa, i32* %Output, align 4
ret void
}
;CHECK-LABEL: test_three_exits
;CHECK-NOT: for.body.epil
;CHECK-NOT: if.end.epil
;CHECK-LABEL: for.body
;CHECK-LABEL: if.end
;CHECK-LABEL: if.end5
define void @test_three_exits(i32* nocapture %Output,
i32* nocapture readonly %Condition,
i32* nocapture readonly %Input,
i32 %MaxJ) {
entry:
%cmp20 = icmp eq i32 %MaxJ, 0
br i1 %cmp20, label %cleanup, label %for.body.preheader
for.body.preheader: ; preds = %entry
br label %for.body
for.body: ; preds = %for.body.preheader, %if.end5
%j.022 = phi i32 [ %inc, %if.end5 ], [ 0, %for.body.preheader ]
%temp.021 = phi i32 [ %temp.0.add, %if.end5 ], [ 0, %for.body.preheader ]
%arrayidx = getelementptr inbounds i32, i32* %Condition, i32 %j.022
%0 = load i32, i32* %arrayidx, align 4
%cmp1 = icmp ugt i32 %0, 65535
br i1 %cmp1, label %cleanup, label %if.end
if.end: ; preds = %for.body
%arrayidx2 = getelementptr inbounds i32, i32* %Input, i32 %j.022
%1 = load i32, i32* %arrayidx2, align 4
%cmp3 = icmp ugt i32 %1, 65535
br i1 %cmp3, label %cleanup, label %if.end5
if.end5: ; preds = %if.end
%tobool = icmp eq i32 %0, 0
%add = select i1 %tobool, i32 0, i32 %1
%temp.0.add = add i32 %add, %temp.021
%inc = add nuw i32 %j.022, 1
%cmp = icmp ult i32 %inc, %MaxJ
br i1 %cmp, label %for.body, label %cleanup
cleanup: ; preds = %if.end5, %for.body, %if.end, %entry
%temp.0.lcssa = phi i32 [ 0, %entry ], [ %temp.021, %if.end ], [ %temp.021, %for.body ], [ %temp.0.add, %if.end5 ]
store i32 %temp.0.lcssa, i32* %Output, align 4
ret void
}
;CHECK-LABEL: test_four_blocks
;CHECK: for.body.epil:
;CHECK: if.else.epil:
;CHECK: if.then.epil:
;CHECK: for.cond.cleanup:
;CHECK: for.body:
;CHECK: if.then:
;CHECK: for.inc:
;CHECK: for.body.epil.1:
;CHECK: if.else.epil.1:
;CHECK: if.then.epil.1:
;CHECK: for.inc.epil.1:
;CHECK: for.body.epil.2:
;CHECK: if.else.epil.2:
;CHECK: if.then.epil.2:
;CHECK: for.inc.epil.2:
;CHECK: if.else.1:
;CHECK: if.then.1:
;CHECK: for.inc.1:
;CHECK: if.else.2:
;CHECK: if.then.2:
;CHECK: for.inc.2:
;CHECK: if.else.3:
;CHECK: if.then.3:
;CHECK: for.inc.3:
define void @test_four_blocks(i32* nocapture %Output,
i32* nocapture readonly %Condition,
i32* nocapture readonly %Input,
i32 %MaxJ) {
entry:
%cmp25 = icmp ugt i32 %MaxJ, 1
br i1 %cmp25, label %for.body.lr.ph, label %for.cond.cleanup
for.body.lr.ph: ; preds = %entry
%.pre = load i32, i32* %Input, align 4
br label %for.body
for.cond.cleanup: ; preds = %for.inc, %entry
%temp.0.lcssa = phi i32 [ 0, %entry ], [ %temp.1, %for.inc ]
store i32 %temp.0.lcssa, i32* %Output, align 4
ret void
for.body: ; preds = %for.inc, %for.body.lr.ph
%0 = phi i32 [ %.pre, %for.body.lr.ph ], [ %2, %for.inc ]
%j.027 = phi i32 [ 1, %for.body.lr.ph ], [ %inc, %for.inc ]
%temp.026 = phi i32 [ 0, %for.body.lr.ph ], [ %temp.1, %for.inc ]
%arrayidx = getelementptr inbounds i32, i32* %Condition, i32 %j.027
%1 = load i32, i32* %arrayidx, align 4
%cmp1 = icmp ugt i32 %1, 65535
%arrayidx2 = getelementptr inbounds i32, i32* %Input, i32 %j.027
%2 = load i32, i32* %arrayidx2, align 4
%cmp4 = icmp ugt i32 %2, %0
br i1 %cmp1, label %if.then, label %if.else
if.then: ; preds = %for.body
%cond = zext i1 %cmp4 to i32
%add = add i32 %temp.026, %cond
br label %for.inc
if.else: ; preds = %for.body
%not.cmp4 = xor i1 %cmp4, true
%sub = sext i1 %not.cmp4 to i32
%sub10.sink = add i32 %j.027, %sub
%arrayidx11 = getelementptr inbounds i32, i32* %Input, i32 %sub10.sink
%3 = load i32, i32* %arrayidx11, align 4
%sub13 = sub i32 %temp.026, %3
br label %for.inc
for.inc: ; preds = %if.then, %if.else
%temp.1 = phi i32 [ %add, %if.then ], [ %sub13, %if.else ]
%inc = add nuw i32 %j.027, 1
%exitcond = icmp eq i32 %inc, %MaxJ
br i1 %exitcond, label %for.cond.cleanup, label %for.body
}
;CHECK-LABEL: test_five_blocks
;CHECK-NOT: for.body.epil:
;CHECK: for.body:
;CHECK: if.end:
;CHECK: if.else:
;CHECK: for.inc:
;CHECK-NOT: for.inc.1:
define void @test_five_blocks(i32* nocapture %Output,
i32* nocapture readonly %Condition,
i32* nocapture readonly %Input,
i32 %MaxJ) {
entry:
%cmp24 = icmp ugt i32 %MaxJ, 1
br i1 %cmp24, label %for.body.preheader, label %cleanup
for.body.preheader: ; preds = %entry
br label %for.body
for.body: ; preds = %for.body.preheader, %for.inc
%j.026 = phi i32 [ %inc, %for.inc ], [ 1, %for.body.preheader ]
%temp.025 = phi i32 [ %temp.1, %for.inc ], [ 0, %for.body.preheader ]
%arrayidx = getelementptr inbounds i32, i32* %Input, i32 %j.026
%0 = load i32, i32* %arrayidx, align 4
%add = add i32 %0, %temp.025
%cmp1 = icmp ugt i32 %add, 16777215
br i1 %cmp1, label %cleanup, label %if.end
if.end: ; preds = %for.body
%arrayidx2 = getelementptr inbounds i32, i32* %Condition, i32 %j.026
%1 = load i32, i32* %arrayidx2, align 4
%cmp3 = icmp ugt i32 %1, 65535
br i1 %cmp3, label %if.then4, label %if.else
if.then4: ; preds = %if.end
%sub = add i32 %j.026, -1
%arrayidx6 = getelementptr inbounds i32, i32* %Input, i32 %sub
%2 = load i32, i32* %arrayidx6, align 4
%cmp7 = icmp ugt i32 %0, %2
%cond = zext i1 %cmp7 to i32
%add8 = add i32 %add, %cond
br label %for.inc
if.else: ; preds = %if.end
%and = and i32 %add, %0
br label %for.inc
for.inc: ; preds = %if.then4, %if.else
%temp.1 = phi i32 [ %add8, %if.then4 ], [ %and, %if.else ]
%inc = add nuw i32 %j.026, 1
%cmp = icmp ult i32 %inc, %MaxJ
br i1 %cmp, label %for.body, label %cleanup
cleanup: ; preds = %for.inc, %for.body, %entry
%temp.2 = phi i32 [ 0, %entry ], [ %add, %for.body ], [ %temp.1, %for.inc ]
store i32 %temp.2, i32* %Output, align 4
ret void
}
;CHECK-LABEL: iterate_inc
;CHECK: while.body:
;CHECK: while.end:
;CHECK: while.body.1:
;CHECK: while.body.2:
;CHECK: while.body.3:
%struct.Node = type { %struct.Node*, i32 }
define void @iterate_inc(%struct.Node* %n, i32 %limit) {
entry:
%tobool5 = icmp eq %struct.Node* %n, null
br i1 %tobool5, label %while.end, label %land.rhs.preheader
land.rhs.preheader: ; preds = %entry
br label %land.rhs
land.rhs: ; preds = %land.rhs.preheader, %while.body
%list.addr.06 = phi %struct.Node* [ %2, %while.body ], [ %n, %land.rhs.preheader ]
%val = getelementptr inbounds %struct.Node, %struct.Node* %list.addr.06, i32 0, i32 1
%0 = load i32, i32* %val, align 4
%cmp = icmp slt i32 %0, %limit
br i1 %cmp, label %while.body, label %while.end
while.body: ; preds = %land.rhs
%inc = add nsw i32 %0, 1
store i32 %inc, i32* %val, align 4
%1 = bitcast %struct.Node* %list.addr.06 to %struct.Node**
%2 = load %struct.Node*, %struct.Node** %1, align 4
%tobool = icmp eq %struct.Node* %2, null
br i1 %tobool, label %while.end, label %land.rhs
while.end: ; preds = %land.rhs, %while.body, %entry
ret void
}