diff --git a/include/llvm/MC/MCInstrItineraries.h b/include/llvm/MC/MCInstrItineraries.h index d8587068ae5..65d1559ac66 100644 --- a/include/llvm/MC/MCInstrItineraries.h +++ b/include/llvm/MC/MCInstrItineraries.h @@ -16,6 +16,7 @@ #ifndef LLVM_MC_MCINSTRITINERARIES_H #define LLVM_MC_MCINSTRITINERARIES_H +#include "llvm/MC/MCSchedule.h" #include namespace llvm { @@ -103,82 +104,13 @@ struct InstrItinerary { }; -//===----------------------------------------------------------------------===// -/// Instruction itinerary properties - These properties provide general -/// information about the microarchitecture to the scheduler. -/// -struct InstrItineraryProps { - // IssueWidth is the maximum number of instructions that may be scheduled in - // the same per-cycle group. - unsigned IssueWidth; - static const unsigned DefaultIssueWidth = 1; - - // MinLatency is the minimum latency between a register write - // followed by a data dependent read. This determines which - // instructions may be scheduled in the same per-cycle group. This - // is distinct from *expected* latency, which determines the likely - // critical path but does not guarantee a pipeline - // hazard. MinLatency can always be overridden by the number of - // InstrStage cycles. - // - // (-1) Standard in-order processor. - // Use InstrItinerary OperandCycles as MinLatency. - // If no OperandCycles exist, then use the cycle of the last InstrStage. - // - // (0) Out-of-order processor, or in-order with bundled dependencies. - // RAW dependencies may be dispatched in the same cycle. - // Optional InstrItinerary OperandCycles provides expected latency. - // - // (>0) In-order processor with variable latencies. - // Use the greater of this value or the cycle of the last InstrStage. - // Optional InstrItinerary OperandCycles provides expected latency. - // TODO: can't yet specify both min and expected latency per operand. - int MinLatency; - static const unsigned DefaultMinLatency = -1; - - // LoadLatency is the expected latency of load instructions. - // - // If MinLatency >= 0, this may be overriden for individual load opcodes by - // InstrItinerary OperandCycles. - unsigned LoadLatency; - static const unsigned DefaultLoadLatency = 4; - - // HighLatency is the expected latency of "very high latency" operations. - // See TargetInstrInfo::isHighLatencyDef(). - // By default, this is set to an arbitrarily high number of cycles - // likely to have some impact on scheduling heuristics. - // If MinLatency >= 0, this may be overriden by InstrItinData OperandCycles. - unsigned HighLatency; - static const unsigned DefaultHighLatency = 10; - - // Default's must be specified as static const literals so that tablegenerated - // target code can use it in static initializers. The defaults need to be - // initialized in this default ctor because some clients directly instantiate - // InstrItineraryData instead of using a generated itinerary. - InstrItineraryProps(): IssueWidth(DefaultMinLatency), - MinLatency(DefaultMinLatency), - LoadLatency(DefaultLoadLatency), - HighLatency(DefaultHighLatency) {} - - InstrItineraryProps(unsigned iw, int ml, unsigned ll, unsigned hl): - IssueWidth(iw), MinLatency(ml), LoadLatency(ll), HighLatency(hl) {} -}; - -//===----------------------------------------------------------------------===// -/// Encapsulate all subtarget specific information for scheduling for use with -/// SubtargetInfoKV. -struct InstrItinerarySubtargetValue { - const InstrItineraryProps *Props; - const InstrItinerary *Itineraries; -}; - //===----------------------------------------------------------------------===// /// Instruction itinerary Data - Itinerary data supplied by a subtarget to be /// used by a target. /// class InstrItineraryData { public: - InstrItineraryProps Props; + const MCSchedModel *SchedModel; ///< Basic machine properties. const InstrStage *Stages; ///< Array of stages selected const unsigned *OperandCycles; ///< Array of operand cycles selected const unsigned *Forwardings; ///< Array of pipeline forwarding pathes @@ -186,13 +118,14 @@ public: /// Ctors. /// - InstrItineraryData() : Stages(0), OperandCycles(0), Forwardings(0), - Itineraries(0) {} + InstrItineraryData() : SchedModel(&MCSchedModel::DefaultSchedModel), + Stages(0), OperandCycles(0), + Forwardings(0), Itineraries(0) {} - InstrItineraryData(const InstrItineraryProps *P, const InstrStage *S, - const unsigned *OS, const unsigned *F, - const InstrItinerary *I) - : Props(*P), Stages(S), OperandCycles(OS), Forwardings(F), Itineraries(I) {} + InstrItineraryData(const MCSchedModel *SM, const InstrStage *S, + const unsigned *OS, const unsigned *F) + : SchedModel(SM), Stages(S), OperandCycles(OS), Forwardings(F), + Itineraries(SchedModel->InstrItineraries) {} /// isEmpty - Returns true if there are no itineraries. /// @@ -232,13 +165,9 @@ public: /// then it defaults to one cycle. unsigned getStageLatency(unsigned ItinClassIndx) const { // If the target doesn't provide itinerary information, use a simple - // non-zero default value for all instructions. Some target's provide a - // dummy (Generic) itinerary which should be handled as if it's itinerary is - // empty. We identify this by looking for a reference to stage zero (invalid - // stage). This is different from beginStage == endStage != 0, which could - // be used for zero-latency pseudo ops. - if (isEmpty() || Itineraries[ItinClassIndx].FirstStage == 0) - return (Props.MinLatency < 0) ? 1 : Props.MinLatency; + // non-zero default value for all instructions. + if (isEmpty()) + return SchedModel->MinLatency < 0 ? 1 : SchedModel->MinLatency; // Calculate the maximum completion time for any stage. unsigned Latency = 0, StartCycle = 0; diff --git a/include/llvm/MC/MCSchedule.h b/include/llvm/MC/MCSchedule.h new file mode 100644 index 00000000000..49e3fee9c24 --- /dev/null +++ b/include/llvm/MC/MCSchedule.h @@ -0,0 +1,108 @@ +//===-- llvm/MC/MCSchedule.h - Scheduling -----------------------*- C++ -*-===// +// +// The LLVM Compiler Infrastructure +// +// This file is distributed under the University of Illinois Open Source +// License. See LICENSE.TXT for details. +// +//===----------------------------------------------------------------------===// +// +// This file defines the classes used to describe a subtarget's machine model +// for scheduling and other instruction cost heuristics. +// +//===----------------------------------------------------------------------===// + +#ifndef LLVM_MC_MCSCHEDMODEL_H +#define LLVM_MC_MCSCHEDMODEL_H + +#include "llvm/Support/DataTypes.h" + +namespace llvm { + +struct InstrItinerary; + +/// Machine model for scheduling, bundling, and heuristics. +/// +/// The machine model directly provides basic information about the +/// microarchitecture to the scheduler in the form of properties. It also +/// optionally refers to scheduler resources tables and itinerary +/// tables. Scheduler resources tables model the latency and cost for each +/// instruction type. Itinerary tables are an independant mechanism that +/// provides a detailed reservation table describing each cycle of instruction +/// execution. Subtargets may define any or all of the above categories of data +/// depending on the type of CPU and selected scheduler. +class MCSchedModel { +public: + static MCSchedModel DefaultSchedModel; // For unknown processors. + + // IssueWidth is the maximum number of instructions that may be scheduled in + // the same per-cycle group. + unsigned IssueWidth; + static const unsigned DefaultIssueWidth = 1; + + // MinLatency is the minimum latency between a register write + // followed by a data dependent read. This determines which + // instructions may be scheduled in the same per-cycle group. This + // is distinct from *expected* latency, which determines the likely + // critical path but does not guarantee a pipeline + // hazard. MinLatency can always be overridden by the number of + // InstrStage cycles. + // + // (-1) Standard in-order processor. + // Use InstrItinerary OperandCycles as MinLatency. + // If no OperandCycles exist, then use the cycle of the last InstrStage. + // + // (0) Out-of-order processor, or in-order with bundled dependencies. + // RAW dependencies may be dispatched in the same cycle. + // Optional InstrItinerary OperandCycles provides expected latency. + // + // (>0) In-order processor with variable latencies. + // Use the greater of this value or the cycle of the last InstrStage. + // Optional InstrItinerary OperandCycles provides expected latency. + // TODO: can't yet specify both min and expected latency per operand. + int MinLatency; + static const unsigned DefaultMinLatency = -1; + + // LoadLatency is the expected latency of load instructions. + // + // If MinLatency >= 0, this may be overriden for individual load opcodes by + // InstrItinerary OperandCycles. + unsigned LoadLatency; + static const unsigned DefaultLoadLatency = 4; + + // HighLatency is the expected latency of "very high latency" operations. + // See TargetInstrInfo::isHighLatencyDef(). + // By default, this is set to an arbitrarily high number of cycles + // likely to have some impact on scheduling heuristics. + // If MinLatency >= 0, this may be overriden by InstrItinData OperandCycles. + unsigned HighLatency; + static const unsigned DefaultHighLatency = 10; + +private: + // TODO: Add a reference to proc resource types and sched resource tables. + + // Instruction itinerary tables used by InstrItineraryData. + friend class InstrItineraryData; + const InstrItinerary *InstrItineraries; + +public: + // Default's must be specified as static const literals so that tablegenerated + // target code can use it in static initializers. The defaults need to be + // initialized in this default ctor because some clients directly instantiate + // MCSchedModel instead of using a generated itinerary. + MCSchedModel(): IssueWidth(DefaultMinLatency), + MinLatency(DefaultMinLatency), + LoadLatency(DefaultLoadLatency), + HighLatency(DefaultHighLatency), + InstrItineraries(0) {} + + // Table-gen driven ctor. + MCSchedModel(unsigned iw, int ml, unsigned ll, unsigned hl, + const InstrItinerary *ii): + IssueWidth(iw), MinLatency(ml), LoadLatency(ll), HighLatency(hl), + InstrItineraries(ii){} +}; + +} // End llvm namespace + +#endif diff --git a/include/llvm/MC/MCSubtargetInfo.h b/include/llvm/MC/MCSubtargetInfo.h index 82730d469e0..31d632de60b 100644 --- a/include/llvm/MC/MCSubtargetInfo.h +++ b/include/llvm/MC/MCSubtargetInfo.h @@ -30,9 +30,9 @@ class MCSubtargetInfo { std::string TargetTriple; // Target triple const SubtargetFeatureKV *ProcFeatures; // Processor feature list const SubtargetFeatureKV *ProcDesc; // Processor descriptions - const SubtargetInfoKV *ProcItins; // Scheduling itineraries - const InstrStage *Stages; // Instruction stages - const unsigned *OperandCycles; // Operand cycles + const SubtargetInfoKV *ProcSchedModel; // Scheduler machine model + const InstrStage *Stages; // Instruction itinerary stages + const unsigned *OperandCycles; // Itinerary operand cycles const unsigned *ForwardingPaths; // Forwarding paths unsigned NumFeatures; // Number of processor features unsigned NumProcs; // Number of processors @@ -42,7 +42,8 @@ public: void InitMCSubtargetInfo(StringRef TT, StringRef CPU, StringRef FS, const SubtargetFeatureKV *PF, const SubtargetFeatureKV *PD, - const SubtargetInfoKV *PI, const InstrStage *IS, + const SubtargetInfoKV *ProcSched, + const InstrStage *IS, const unsigned *OC, const unsigned *FP, unsigned NF, unsigned NP); @@ -69,6 +70,10 @@ public: /// bits. This version will also change all implied bits. uint64_t ToggleFeature(StringRef FS); + /// getSchedModelForCPU - Get the machine model of a CPU. + /// + MCSchedModel *getSchedModelForCPU(StringRef CPU) const; + /// getInstrItineraryForCPU - Get scheduling itinerary of a CPU. /// InstrItineraryData getInstrItineraryForCPU(StringRef CPU) const; diff --git a/include/llvm/Target/Target.td b/include/llvm/Target/Target.td index 5227bab4cf5..440cf65d470 100644 --- a/include/llvm/Target/Target.td +++ b/include/llvm/Target/Target.td @@ -933,6 +933,10 @@ class Processor f> { // string Name = n; + // SchedModel - The machine model for scheduling and instruction cost. + // + SchedMachineModel SchedModel = NoSchedModel; + // ProcItin - The scheduling information for the target processor. // ProcessorItineraries ProcItin = pi; @@ -941,6 +945,14 @@ class Processor f> { list Features = f; } +// ProcessorModel allows subtargets to specify the more general +// SchedMachineModel instead if a ProcessorItinerary. Subtargets will +// gradually move to this newer form. +class ProcessorModel f> + : Processor { + let SchedModel = m; +} + //===----------------------------------------------------------------------===// // Pull in the common support for calling conventions. // diff --git a/include/llvm/Target/TargetItinerary.td b/include/llvm/Target/TargetItinerary.td new file mode 100644 index 00000000000..cc74006dc9f --- /dev/null +++ b/include/llvm/Target/TargetItinerary.td @@ -0,0 +1,136 @@ +//===- TargetItinerary.td - Target Itinierary Description --*- tablegen -*-===// +// +// The LLVM Compiler Infrastructure +// +// This file is distributed under the University of Illinois Open Source +// License. See LICENSE.TXT for details. +// +//===----------------------------------------------------------------------===// +// +// This file defines the target-independent scheduling interfaces +// which should be implemented by each target that uses instruction +// itineraries for scheduling. Itineraries are details reservation +// tables for each instruction class. They are most appropriate for +// in-order machine with complicated scheduling or bundling constraints. +// +//===----------------------------------------------------------------------===// + +//===----------------------------------------------------------------------===// +// Processor functional unit - These values represent the function units +// available across all chip sets for the target. Eg., IntUnit, FPUnit, ... +// These may be independent values for each chip set or may be shared across +// all chip sets of the target. Each functional unit is treated as a resource +// during scheduling and has an affect instruction order based on availability +// during a time interval. +// +class FuncUnit; + +//===----------------------------------------------------------------------===// +// Pipeline bypass / forwarding - These values specifies the symbolic names of +// pipeline bypasses which can be used to forward results of instructions +// that are forwarded to uses. +class Bypass; +def NoBypass : Bypass; + +class ReservationKind val> { + int Value = val; +} + +def Required : ReservationKind<0>; +def Reserved : ReservationKind<1>; + +//===----------------------------------------------------------------------===// +// Instruction stage - These values represent a non-pipelined step in +// the execution of an instruction. Cycles represents the number of +// discrete time slots needed to complete the stage. Units represent +// the choice of functional units that can be used to complete the +// stage. Eg. IntUnit1, IntUnit2. NextCycles indicates how many +// cycles should elapse from the start of this stage to the start of +// the next stage in the itinerary. For example: +// +// A stage is specified in one of two ways: +// +// InstrStage<1, [FU_x, FU_y]> - TimeInc defaults to Cycles +// InstrStage<1, [FU_x, FU_y], 0> - TimeInc explicit +// + +class InstrStage units, + int timeinc = -1, + ReservationKind kind = Required> { + int Cycles = cycles; // length of stage in machine cycles + list Units = units; // choice of functional units + int TimeInc = timeinc; // cycles till start of next stage + int Kind = kind.Value; // kind of FU reservation +} + +//===----------------------------------------------------------------------===// +// Instruction itinerary - An itinerary represents a sequential series of steps +// required to complete an instruction. Itineraries are represented as lists of +// instruction stages. +// + +//===----------------------------------------------------------------------===// +// Instruction itinerary classes - These values represent 'named' instruction +// itinerary. Using named itineraries simplifies managing groups of +// instructions across chip sets. An instruction uses the same itinerary class +// across all chip sets. Thus a new chip set can be added without modifying +// instruction information. +// +class InstrItinClass; +def NoItinerary : InstrItinClass; + +//===----------------------------------------------------------------------===// +// Instruction itinerary data - These values provide a runtime map of an +// instruction itinerary class (name) to its itinerary data. +// +// NumMicroOps represents the number of micro-operations that each instruction +// in the class are decoded to. If the number is zero, then it means the +// instruction can decode into variable number of micro-ops and it must be +// determined dynamically. This directly relates to the itineraries +// global IssueWidth property, which constrains the number of microops +// that can issue per cycle. +// +// OperandCycles are optional "cycle counts". They specify the cycle after +// instruction issue the values which correspond to specific operand indices +// are defined or read. Bypasses are optional "pipeline forwarding pathes", if +// a def by an instruction is available on a specific bypass and the use can +// read from the same bypass, then the operand use latency is reduced by one. +// +// InstrItinData, +// InstrStage<1, [A9_AGU]>], +// [3, 1], [A9_LdBypass]>, +// InstrItinData], +// [1, 1], [NoBypass, A9_LdBypass]>, +// +// In this example, the instruction of IIC_iLoadi reads its input on cycle 1 +// (after issue) and the result of the load is available on cycle 3. The result +// is available via forwarding path A9_LdBypass. If it's used by the first +// source operand of instructions of IIC_iMVNr class, then the operand latency +// is reduced by 1. +class InstrItinData stages, + list operandcycles = [], + list bypasses = [], int uops = 1> { + InstrItinClass TheClass = Class; + int NumMicroOps = uops; + list Stages = stages; + list OperandCycles = operandcycles; + list Bypasses = bypasses; +} + +//===----------------------------------------------------------------------===// +// Processor itineraries - These values represent the set of all itinerary +// classes for a given chip set. +// +// Set property values to -1 to use the default. +// See InstrItineraryProps for comments and defaults. +class ProcessorItineraries fu, list bp, + list iid> { + list FU = fu; + list BP = bp; + list IID = iid; +} + +// NoItineraries - A marker that can be used by processors without schedule +// info. Subtargets using NoItineraries can bypass the scheduler's +// expensive HazardRecognizer because no reservation table is needed. +def NoItineraries : ProcessorItineraries<[], [], []>; diff --git a/include/llvm/Target/TargetSchedule.td b/include/llvm/Target/TargetSchedule.td index caa5a84c83d..5bbed58c878 100644 --- a/include/llvm/Target/TargetSchedule.td +++ b/include/llvm/Target/TargetSchedule.td @@ -12,141 +12,29 @@ // //===----------------------------------------------------------------------===// -//===----------------------------------------------------------------------===// -// Processor functional unit - These values represent the function units -// available across all chip sets for the target. Eg., IntUnit, FPUnit, ... -// These may be independent values for each chip set or may be shared across -// all chip sets of the target. Each functional unit is treated as a resource -// during scheduling and has an affect instruction order based on availability -// during a time interval. -// -class FuncUnit; +include "llvm/Target/TargetItinerary.td" -//===----------------------------------------------------------------------===// -// Pipeline bypass / forwarding - These values specifies the symbolic names of -// pipeline bypasses which can be used to forward results of instructions -// that are forwarded to uses. -class Bypass; -def NoBypass : Bypass; - -class ReservationKind val> { - int Value = val; -} - -def Required : ReservationKind<0>; -def Reserved : ReservationKind<1>; - -//===----------------------------------------------------------------------===// -// Instruction stage - These values represent a non-pipelined step in -// the execution of an instruction. Cycles represents the number of -// discrete time slots needed to complete the stage. Units represent -// the choice of functional units that can be used to complete the -// stage. Eg. IntUnit1, IntUnit2. NextCycles indicates how many -// cycles should elapse from the start of this stage to the start of -// the next stage in the itinerary. For example: +// The SchedMachineModel is defined by subtargets for three categories of data: +// 1) Basic properties for coarse grained instruction cost model. +// 2) Scheduler Read/Write resources for simple per-opcode cost model. +// 3) Instruction itineraties for detailed reservation tables. // -// A stage is specified in one of two ways: -// -// InstrStage<1, [FU_x, FU_y]> - TimeInc defaults to Cycles -// InstrStage<1, [FU_x, FU_y], 0> - TimeInc explicit -// - -class InstrStage units, - int timeinc = -1, - ReservationKind kind = Required> { - int Cycles = cycles; // length of stage in machine cycles - list Units = units; // choice of functional units - int TimeInc = timeinc; // cycles till start of next stage - int Kind = kind.Value; // kind of FU reservation -} - -//===----------------------------------------------------------------------===// -// Instruction itinerary - An itinerary represents a sequential series of steps -// required to complete an instruction. Itineraries are represented as lists of -// instruction stages. -// - -//===----------------------------------------------------------------------===// -// Instruction itinerary classes - These values represent 'named' instruction -// itinerary. Using named itineraries simplifies managing groups of -// instructions across chip sets. An instruction uses the same itinerary class -// across all chip sets. Thus a new chip set can be added without modifying -// instruction information. -// -class InstrItinClass; -def NoItinerary : InstrItinClass; - -//===----------------------------------------------------------------------===// -// Instruction itinerary data - These values provide a runtime map of an -// instruction itinerary class (name) to its itinerary data. -// -// NumMicroOps represents the number of micro-operations that each instruction -// in the class are decoded to. If the number is zero, then it means the -// instruction can decode into variable number of micro-ops and it must be -// determined dynamically. This directly relates to the itineraries -// global IssueWidth property, which constrains the number of microops -// that can issue per cycle. -// -// OperandCycles are optional "cycle counts". They specify the cycle after -// instruction issue the values which correspond to specific operand indices -// are defined or read. Bypasses are optional "pipeline forwarding pathes", if -// a def by an instruction is available on a specific bypass and the use can -// read from the same bypass, then the operand use latency is reduced by one. -// -// InstrItinData, -// InstrStage<1, [A9_AGU]>], -// [3, 1], [A9_LdBypass]>, -// InstrItinData], -// [1, 1], [NoBypass, A9_LdBypass]>, -// -// In this example, the instruction of IIC_iLoadi reads its input on cycle 1 -// (after issue) and the result of the load is available on cycle 3. The result -// is available via forwarding path A9_LdBypass. If it's used by the first -// source operand of instructions of IIC_iMVNr class, then the operand latency -// is reduced by 1. -class InstrItinData stages, - list operandcycles = [], - list bypasses = [], int uops = 1> { - InstrItinClass TheClass = Class; - int NumMicroOps = uops; - list Stages = stages; - list OperandCycles = operandcycles; - list Bypasses = bypasses; -} - -//===----------------------------------------------------------------------===// -// Processor itineraries - These values represent the set of all itinerary -// classes for a given chip set. -// -// Set property values to -1 to use the default. -// See InstrItineraryProps for comments and defaults. -class ProcessorItineraries fu, list bp, - list iid> { +// Default values for basic properties are defined in MCSchedModel. "-1" +// indicates that the property is not overriden by the target description. +class SchedMachineModel { int IssueWidth = -1; // Max instructions that may be scheduled per cycle. int MinLatency = -1; // Determines which instrucions are allowed in a group. // (-1) inorder (0) ooo, (1): inorder +var latencies. int LoadLatency = -1; // Cycles for loads to access the cache. int HighLatency = -1; // Approximation of cycles for "high latency" ops. - list FU = fu; - list BP = bp; - list IID = iid; + ProcessorItineraries Itineraries = NoItineraries; + + bit NoModel = 0; // Special tag to indicate missing machine model. } -// NoItineraries - A marker that can be used by processors without schedule -// info. Subtargets using NoItineraries can bypass the scheduler's -// expensive HazardRecognizer because no reservation table is needed. -def NoItineraries : ProcessorItineraries<[], [], []>; - -// Processor itineraries with non-unit issue width. This allows issue -// width to be explicity specified at the beginning of the itinerary. -class MultiIssueItineraries fu, list bp, - list iid> - : ProcessorItineraries { - let IssueWidth = issuewidth; - let MinLatency = minlatency; - let LoadLatency = loadlatency; - let HighLatency = highlatency; +def NoSchedModel : SchedMachineModel { + let NoModel = 1; } + +// TODO: Define classes for processor and scheduler resources. diff --git a/lib/CodeGen/MachineScheduler.cpp b/lib/CodeGen/MachineScheduler.cpp index 847bf1e76e3..098ec4741f3 100644 --- a/lib/CodeGen/MachineScheduler.cpp +++ b/lib/CodeGen/MachineScheduler.cpp @@ -403,7 +403,8 @@ public: /// getIssueWidth - Return the max instructions per scheduling group. unsigned getIssueWidth() const { - return InstrItins ? InstrItins->Props.IssueWidth : 1; + return (InstrItins && InstrItins->SchedModel) + ? InstrItins->SchedModel->IssueWidth : 1; } /// getNumMicroOps - Return the number of issue slots required for this MI. diff --git a/lib/CodeGen/ScoreboardHazardRecognizer.cpp b/lib/CodeGen/ScoreboardHazardRecognizer.cpp index 7110b7566ab..e6753664850 100644 --- a/lib/CodeGen/ScoreboardHazardRecognizer.cpp +++ b/lib/CodeGen/ScoreboardHazardRecognizer.cpp @@ -72,10 +72,12 @@ ScoreboardHazardRecognizer(const InstrItineraryData *II, ReservedScoreboard.reset(ScoreboardDepth); RequiredScoreboard.reset(ScoreboardDepth); + // If MaxLookAhead is not set above, then we are not enabled. if (!isEnabled()) DEBUG(dbgs() << "Disabled scoreboard hazard recognizer\n"); else { - IssueWidth = ItinData->Props.IssueWidth; + // A nonempty itinerary must have a SchedModel. + IssueWidth = ItinData->SchedModel->IssueWidth; DEBUG(dbgs() << "Using scoreboard hazard recognizer: Depth = " << ScoreboardDepth << '\n'); } diff --git a/lib/CodeGen/SelectionDAG/ResourcePriorityQueue.cpp b/lib/CodeGen/SelectionDAG/ResourcePriorityQueue.cpp index 01622cb2951..c3794d5f786 100644 --- a/lib/CodeGen/SelectionDAG/ResourcePriorityQueue.cpp +++ b/lib/CodeGen/SelectionDAG/ResourcePriorityQueue.cpp @@ -318,7 +318,7 @@ void ResourcePriorityQueue::reserveResources(SUnit *SU) { // If packet is now full, reset the state so in the next cycle // we start fresh. - if (Packet.size() >= InstrItins->Props.IssueWidth) { + if (Packet.size() >= InstrItins->SchedModel->IssueWidth) { ResourcesModel->clearResources(); Packet.clear(); } diff --git a/lib/CodeGen/TargetInstrInfoImpl.cpp b/lib/CodeGen/TargetInstrInfoImpl.cpp index 54be88a8bb0..1da5512c91b 100644 --- a/lib/CodeGen/TargetInstrInfoImpl.cpp +++ b/lib/CodeGen/TargetInstrInfoImpl.cpp @@ -573,9 +573,9 @@ TargetInstrInfoImpl::getNumMicroOps(const InstrItineraryData *ItinData, unsigned TargetInstrInfo::defaultDefLatency(const InstrItineraryData *ItinData, const MachineInstr *DefMI) const { if (DefMI->mayLoad()) - return ItinData->Props.LoadLatency; + return ItinData->SchedModel->LoadLatency; if (isHighLatencyDef(DefMI->getOpcode())) - return ItinData->Props.HighLatency; + return ItinData->SchedModel->HighLatency; return 1; } @@ -629,7 +629,7 @@ static int computeDefOperandLatency( if (FindMin) { // If MinLatency is valid, call getInstrLatency. This uses Stage latency if // it exists before defaulting to MinLatency. - if (ItinData->Props.MinLatency >= 0) + if (ItinData->SchedModel->MinLatency >= 0) return TII->getInstrLatency(ItinData, DefMI); // If MinLatency is invalid, OperandLatency is interpreted as MinLatency. diff --git a/lib/MC/MCSubtargetInfo.cpp b/lib/MC/MCSubtargetInfo.cpp index 318e5a3da2a..05c83f760a2 100644 --- a/lib/MC/MCSubtargetInfo.cpp +++ b/lib/MC/MCSubtargetInfo.cpp @@ -17,11 +17,13 @@ using namespace llvm; +MCSchedModel MCSchedModel::DefaultSchedModel; // For unknown processors. + void MCSubtargetInfo::InitMCSubtargetInfo(StringRef TT, StringRef CPU, StringRef FS, const SubtargetFeatureKV *PF, const SubtargetFeatureKV *PD, - const SubtargetInfoKV *PI, + const SubtargetInfoKV *ProcSched, const InstrStage *IS, const unsigned *OC, const unsigned *FP, @@ -29,7 +31,7 @@ MCSubtargetInfo::InitMCSubtargetInfo(StringRef TT, StringRef CPU, StringRef FS, TargetTriple = TT; ProcFeatures = PF; ProcDesc = PD; - ProcItins = PI; + ProcSchedModel = ProcSched; Stages = IS; OperandCycles = OC; ForwardingPaths = FP; @@ -68,14 +70,14 @@ uint64_t MCSubtargetInfo::ToggleFeature(StringRef FS) { } -InstrItineraryData -MCSubtargetInfo::getInstrItineraryForCPU(StringRef CPU) const { - assert(ProcItins && "Instruction itineraries information not available!"); +MCSchedModel * +MCSubtargetInfo::getSchedModelForCPU(StringRef CPU) const { + assert(ProcSchedModel && "Processor machine model not available!"); #ifndef NDEBUG for (size_t i = 1; i < NumProcs; i++) { - assert(strcmp(ProcItins[i - 1].Key, ProcItins[i].Key) < 0 && - "Itineraries table is not sorted"); + assert(strcmp(ProcSchedModel[i - 1].Key, ProcSchedModel[i].Key) < 0 && + "Processor machine model table is not sorted"); } #endif @@ -83,16 +85,19 @@ MCSubtargetInfo::getInstrItineraryForCPU(StringRef CPU) const { SubtargetInfoKV KV; KV.Key = CPU.data(); const SubtargetInfoKV *Found = - std::lower_bound(ProcItins, ProcItins+NumProcs, KV); - if (Found == ProcItins+NumProcs || StringRef(Found->Key) != CPU) { + std::lower_bound(ProcSchedModel, ProcSchedModel+NumProcs, KV); + if (Found == ProcSchedModel+NumProcs || StringRef(Found->Key) != CPU) { errs() << "'" << CPU << "' is not a recognized processor for this target" << " (ignoring processor)\n"; - return InstrItineraryData(); + return &MCSchedModel::DefaultSchedModel; } - - InstrItinerarySubtargetValue *V = - (InstrItinerarySubtargetValue *)Found->Value; - return InstrItineraryData(V->Props, Stages, OperandCycles, ForwardingPaths, - V->Itineraries); + assert(Found->Value && "Missing processor SchedModel value"); + return (MCSchedModel *)Found->Value; +} + +InstrItineraryData +MCSubtargetInfo::getInstrItineraryForCPU(StringRef CPU) const { + MCSchedModel *SchedModel = getSchedModelForCPU(CPU); + return InstrItineraryData(SchedModel, Stages, OperandCycles, ForwardingPaths); } diff --git a/lib/Target/ARM/ARM.td b/lib/Target/ARM/ARM.td index d332d20f80d..cd3c0e0a416 100644 --- a/lib/Target/ARM/ARM.td +++ b/lib/Target/ARM/ARM.td @@ -204,13 +204,13 @@ def : Processor<"arm1156t2f-s", ARMV6Itineraries, [HasV6T2Ops, FeatureVFP2, FeatureDSPThumb2]>; // V7a Processors. -def : Processor<"cortex-a8", CortexA8Itineraries, +def : ProcessorModel<"cortex-a8", CortexA8Model, [ProcA8, HasV7Ops, FeatureNEON, FeatureDB, FeatureDSPThumb2, FeatureHasRAS]>; -def : Processor<"cortex-a9", CortexA9Itineraries, +def : ProcessorModel<"cortex-a9", CortexA9Model, [ProcA9, HasV7Ops, FeatureNEON, FeatureDB, FeatureDSPThumb2, FeatureHasRAS]>; -def : Processor<"cortex-a9-mp", CortexA9Itineraries, +def : ProcessorModel<"cortex-a9-mp", CortexA9Model, [ProcA9, HasV7Ops, FeatureNEON, FeatureDB, FeatureDSPThumb2, FeatureMP, FeatureHasRAS]>; diff --git a/lib/Target/ARM/ARMScheduleA8.td b/lib/Target/ARM/ARMScheduleA8.td index 61de00a2086..56197d4e002 100644 --- a/lib/Target/ARM/ARMScheduleA8.td +++ b/lib/Target/ARM/ARMScheduleA8.td @@ -22,11 +22,7 @@ def A8_NLSPipe : FuncUnit; // NEON LS pipe // // Dual issue pipeline represented by A8_Pipe0 | A8_Pipe1 // -def CortexA8Itineraries : MultiIssueItineraries< - 2, // IssueWidth - -1, // MinLatency - OperandCycles are interpreted as MinLatency. - 2, // LoadLatency - overriden by OperandCycles. - 10, // HighLatency - currently unused. +def CortexA8Itineraries : ProcessorItineraries< [A8_Pipe0, A8_Pipe1, A8_LSPipe, A8_NPipe, A8_NLSPipe], [], [ // Two fully-pipelined integer ALU pipelines @@ -1061,3 +1057,18 @@ def CortexA8Itineraries : MultiIssueItineraries< InstrStage<1, [A8_NPipe], 0>, InstrStage<2, [A8_NLSPipe]>], [4, 1, 2, 2, 3, 3, 1]> ]>; + +// ===---------------------------------------------------------------------===// +// This following definitions describe the simple machine model which +// will replace itineraries. + +// Cortex-A8 machine model for scheduling and other instruction cost heuristics. +def CortexA8Model : SchedMachineModel { + let IssueWidth = 2; // 2 micro-ops are dispatched per cycle. + let MinLatency = -1; // OperandCycles are interpreted as MinLatency. + let LoadLatency = 2; // Optimistic load latency assuming bypass. + // This is overriden by OperandCycles if the + // Itineraries are queried instead. + + let Itineraries = CortexA8Itineraries; +} diff --git a/lib/Target/ARM/ARMScheduleA9.td b/lib/Target/ARM/ARMScheduleA9.td index 1677ba6a98a..738974e5f3e 100644 --- a/lib/Target/ARM/ARMScheduleA9.td +++ b/lib/Target/ARM/ARMScheduleA9.td @@ -11,6 +11,10 @@ // //===----------------------------------------------------------------------===// +// ===---------------------------------------------------------------------===// +// This section contains legacy support for itineraries. This is +// required until SD and PostRA schedulers are replaced by MachineScheduler. + // // Ad-hoc scheduling information derived from pretty vague "Cortex-A9 Technical // Reference Manual". @@ -31,11 +35,7 @@ def A9_DRegsN : FuncUnit; // FP register set, NEON side // Bypasses def A9_LdBypass : Bypass; -def CortexA9Itineraries : MultiIssueItineraries< - 2, // IssueWidth - FIXME: A9_Issue0, A9_Issue1 are now redundant. - 0, // MinLatency - FIXME: for misched, remove InstrStage for OOO operations. - 2, // LoadLatency - optimistic, assumes bypass, overriden by OperandCycles. - 10, // HighLatency - currently unused. +def CortexA9Itineraries : ProcessorItineraries< [A9_Issue0, A9_Issue1, A9_Branch, A9_ALU0, A9_ALU1, A9_AGU, A9_NPipe, A9_MUX0, A9_LSUnit, A9_DRegsVFP, A9_DRegsN], [A9_LdBypass], [ @@ -1874,3 +1874,21 @@ def CortexA9Itineraries : MultiIssueItineraries< InstrStage<2, [A9_NPipe]>], [4, 1, 2, 2, 3, 3, 1]> ]>; + +// ===---------------------------------------------------------------------===// +// This following definitions describe the simple machine model which +// will replace itineraries. + +// Cortex-A9 machine model for scheduling and other instruction cost heuristics. +def CortexA9Model : SchedMachineModel { + let IssueWidth = 2; // 2 micro-ops are dispatched per cycle. + let MinLatency = 0; // Data dependencies are allowed within dispatch groups. + let LoadLatency = 2; // Optimistic load latency assuming bypass. + // This is overriden by OperandCycles if the + // Itineraries are queried instead. + + let Itineraries = CortexA9Itineraries; +} + +// TODO: Add Cortex-A9 processor and scheduler resources. + diff --git a/lib/Target/Hexagon/Hexagon.td b/lib/Target/Hexagon/Hexagon.td index 8201de3f2a7..451e56206e6 100644 --- a/lib/Target/Hexagon/Hexagon.td +++ b/lib/Target/Hexagon/Hexagon.td @@ -47,14 +47,14 @@ def HexagonInstrInfo : InstrInfo; // Hexagon processors supported. //===----------------------------------------------------------------------===// -class Proc Features> - : Processor; + : ProcessorModel; -def : Proc<"hexagonv2", HexagonItineraries, [ArchV2]>; -def : Proc<"hexagonv3", HexagonItineraries, [ArchV2, ArchV3]>; -def : Proc<"hexagonv4", HexagonItinerariesV4, [ArchV2, ArchV3, ArchV4]>; -def : Proc<"hexagonv5", HexagonItinerariesV4, [ArchV2, ArchV3, ArchV4, ArchV5]>; +def : Proc<"hexagonv2", HexagonModel, [ArchV2]>; +def : Proc<"hexagonv3", HexagonModel, [ArchV2, ArchV3]>; +def : Proc<"hexagonv4", HexagonModelV4, [ArchV2, ArchV3, ArchV4]>; +def : Proc<"hexagonv5", HexagonModelV4, [ArchV2, ArchV3, ArchV4, ArchV5]>; // Hexagon Uses the MC printer for assembler output, so make sure the TableGen diff --git a/lib/Target/Hexagon/HexagonSchedule.td b/lib/Target/Hexagon/HexagonSchedule.td index b4df6784e7d..d1076b8e441 100644 --- a/lib/Target/Hexagon/HexagonSchedule.td +++ b/lib/Target/Hexagon/HexagonSchedule.td @@ -41,9 +41,12 @@ def HexagonItineraries : InstrItinData]>, InstrItinData]>, InstrItinData]> - ]> { + ]>; + +def HexagonModel : SchedMachineModel { // Max issue per cycle == bundle width. let IssueWidth = 4; + let Itineraries = HexagonItineraries; } //===----------------------------------------------------------------------===// diff --git a/lib/Target/Hexagon/HexagonScheduleV4.td b/lib/Target/Hexagon/HexagonScheduleV4.td index 8d6f7b2b7a9..9b41126ca6f 100644 --- a/lib/Target/Hexagon/HexagonScheduleV4.td +++ b/lib/Target/Hexagon/HexagonScheduleV4.td @@ -52,12 +52,14 @@ def HexagonItinerariesV4 : InstrItinData]>, InstrItinData]>, InstrItinData]> - ]> { + ]>; + +def HexagonModelV4 : SchedMachineModel { // Max issue per cycle == bundle width. let IssueWidth = 4; + let Itineraries = HexagonItinerariesV4; } - //===----------------------------------------------------------------------===// // Hexagon V4 Resource Definitions - //===----------------------------------------------------------------------===// diff --git a/lib/Target/X86/X86.td b/lib/Target/X86/X86.td index 0aafd605488..6c1a816c9ff 100644 --- a/lib/Target/X86/X86.td +++ b/lib/Target/X86/X86.td @@ -131,10 +131,10 @@ def ProcIntelAtom : SubtargetFeature<"atom", "X86ProcFamily", "IntelAtom", "Intel Atom processors">; class Proc Features> - : Processor; + : ProcessorModel; class AtomProc Features> - : Processor; + : ProcessorModel; def : Proc<"generic", []>; def : Proc<"i386", []>; diff --git a/lib/Target/X86/X86Schedule.td b/lib/Target/X86/X86Schedule.td index 4331cf31e89..c14407f9ac1 100644 --- a/lib/Target/X86/X86Schedule.td +++ b/lib/Target/X86/X86Schedule.td @@ -470,14 +470,12 @@ def IIC_NOP : InstrItinClass; // latencies. Since these latencies are not used for pipeline hazards, // they do not need to be exact. // -// This set of instruction itineraries should contain no reference to -// InstrStages. When an iterary has no stages, the scheduler can -// bypass the logic needed for checking pipeline stage hazards. -def GenericItineraries : MultiIssueItineraries< - 4, // IssueWidth - 0, // MinLatency - 4, // LoadLatency (expected, may be overriden by OperandCycles) - 10, // HighLatency (expected, may be overriden by OperandCycles) - [], [], []>; // no FuncUnits, Bypasses, or InstrItinData. +// The GenericModel contains no instruciton itineraries. +def GenericModel : SchedMachineModel { + let IssueWidth = 4; + let MinLatency = 0; + let LoadLatency = 4; + let HighLatency = 10; +} include "X86ScheduleAtom.td" diff --git a/lib/Target/X86/X86ScheduleAtom.td b/lib/Target/X86/X86ScheduleAtom.td index 56dd3407b26..87102614cc8 100644 --- a/lib/Target/X86/X86ScheduleAtom.td +++ b/lib/Target/X86/X86ScheduleAtom.td @@ -22,12 +22,7 @@ def Port0 : FuncUnit; // ALU: ALU0, shift/rotate, load/store def Port1 : FuncUnit; // ALU: ALU1, bit processing, jump, and LEA // SIMD/FP: SIMD ALU, FP Adder -def AtomItineraries : MultiIssueItineraries< - 2, // IssueWidth=2 allows 2 instructions per scheduling group. - 1, // MinLatency=1. InstrStage cycles overrides MinLatency. - // OperandCycles may be used for expected latency. - 3, // LoadLatency (expected, may be overriden by OperandCycles) - 30,// HighLatency (expected, may be overriden by OperandCycles) +def AtomItineraries : ProcessorItineraries< [ Port0, Port1 ], [], [ // P0 only @@ -523,3 +518,13 @@ def AtomItineraries : MultiIssueItineraries< InstrItinData] > ]>; +// Atom machine model. +def AtomModel : SchedMachineModel { + let IssueWidth = 2; // Allows 2 instructions per scheduling group. + let MinLatency = 1; // InstrStage cycles overrides MinLatency. + // OperandCycles may be used for expected latency. + let LoadLatency = 3; // Expected cycles, may be overriden by OperandCycles. + let HighLatency = 30;// Expected, may be overriden by OperandCycles. + + let Itineraries = AtomItineraries; +} diff --git a/utils/TableGen/CMakeLists.txt b/utils/TableGen/CMakeLists.txt index c5585f5eaa3..0e14cbae38a 100644 --- a/utils/TableGen/CMakeLists.txt +++ b/utils/TableGen/CMakeLists.txt @@ -11,6 +11,7 @@ add_tablegen(llvm-tblgen LLVM CodeGenDAGPatterns.cpp CodeGenInstruction.cpp CodeGenRegisters.cpp + CodeGenSchedule.cpp CodeGenTarget.cpp DAGISelEmitter.cpp DAGISelMatcherEmitter.cpp diff --git a/utils/TableGen/CodeGenSchedule.cpp b/utils/TableGen/CodeGenSchedule.cpp new file mode 100644 index 00000000000..f57fd182eaf --- /dev/null +++ b/utils/TableGen/CodeGenSchedule.cpp @@ -0,0 +1,151 @@ +//===- CodeGenSchedule.cpp - Scheduling MachineModels ---------------------===// +// +// The LLVM Compiler Infrastructure +// +// This file is distributed under the University of Illinois Open Source +// License. See LICENSE.TXT for details. +// +//===----------------------------------------------------------------------===// +// +// This file defines structures to encapsulate the machine model as decribed in +// the target description. +// +//===----------------------------------------------------------------------===// + +#define DEBUG_TYPE "subtarget-emitter" + +#include "CodeGenSchedule.h" +#include "CodeGenTarget.h" +#include "llvm/Support/Debug.h" + +using namespace llvm; + +// CodeGenModels ctor interprets machine model records and populates maps. +CodeGenSchedModels::CodeGenSchedModels(RecordKeeper &RK, + const CodeGenTarget &TGT): + Records(RK), Target(TGT), NumItineraryClasses(0), HasProcItineraries(false) { + + // Populate SchedClassIdxMap and set NumItineraryClasses. + CollectSchedClasses(); + + // Populate ProcModelMap. + CollectProcModels(); +} + +// Visit all the instruction definitions for this target to gather and enumerate +// the itinerary classes. These are the explicitly specified SchedClasses. More +// SchedClasses may be inferred. +void CodeGenSchedModels::CollectSchedClasses() { + + // NoItinerary is always the first class at Index=0 + SchedClasses.resize(1); + SchedClasses.back().Name = "NoItinerary"; + SchedClassIdxMap[SchedClasses.back().Name] = 0; + + // Gather and sort all itinerary classes used by instruction descriptions. + std::vector ItinClassList; + for (CodeGenTarget::inst_iterator I = Target.inst_begin(), + E = Target.inst_end(); I != E; ++I) { + Record *SchedDef = (*I)->TheDef->getValueAsDef("Itinerary"); + // Map a new SchedClass with no index. + if (!SchedClassIdxMap.count(SchedDef->getName())) { + SchedClassIdxMap[SchedDef->getName()] = 0; + ItinClassList.push_back(SchedDef); + } + } + // Assign each itinerary class unique number, skipping NoItinerary==0 + NumItineraryClasses = ItinClassList.size(); + std::sort(ItinClassList.begin(), ItinClassList.end(), LessRecord()); + for (unsigned i = 0, N = NumItineraryClasses; i < N; i++) { + Record *ItinDef = ItinClassList[i]; + SchedClassIdxMap[ItinDef->getName()] = SchedClasses.size(); + SchedClasses.push_back(CodeGenSchedClass(ItinDef)); + } + + // TODO: Infer classes from non-itinerary scheduler resources. +} + +// Gather all processor models. +void CodeGenSchedModels::CollectProcModels() { + std::vector ProcRecords = + Records.getAllDerivedDefinitions("Processor"); + std::sort(ProcRecords.begin(), ProcRecords.end(), LessRecordFieldName()); + + // Reserve space because we can. Reallocation would be ok. + ProcModels.reserve(ProcRecords.size()); + + // For each processor, find a unique machine model. + for (unsigned i = 0, N = ProcRecords.size(); i < N; ++i) + addProcModel(ProcRecords[i]); +} + +// Get a unique processor model based on the defined MachineModel and +// ProcessorItineraries. +void CodeGenSchedModels::addProcModel(Record *ProcDef) { + unsigned Idx = getProcModelIdx(ProcDef); + if (Idx < ProcModels.size()) + return; + + Record *ModelDef = ProcDef->getValueAsDef("SchedModel"); + Record *ItinsDef = ProcDef->getValueAsDef("ProcItin"); + + std::string ModelName = ModelDef->getName(); + const std::string &ItinName = ItinsDef->getName(); + + bool NoModel = ModelDef->getValueAsBit("NoModel"); + bool hasTopLevelItin = !ItinsDef->getValueAsListOfDefs("IID").empty(); + if (NoModel) { + // If an itinerary is defined without a machine model, infer a new model. + if (NoModel && hasTopLevelItin) { + ModelName = ItinName + "Model"; + ModelDef = NULL; + } + } + else { + // If a machine model is defined, the itinerary must be defined within it + // rather than in the Processor definition itself. + assert(!hasTopLevelItin && "Itinerary must be defined in SchedModel"); + ItinsDef = ModelDef->getValueAsDef("Itineraries"); + } + + ProcModelMap[getProcModelKey(ProcDef)]= ProcModels.size(); + + ProcModels.push_back(CodeGenProcModel(ModelName, ModelDef, ItinsDef)); + + std::vector ItinRecords = ItinsDef->getValueAsListOfDefs("IID"); + CollectProcItin(ProcModels.back(), ItinRecords); +} + +// Gather the processor itineraries. +void CodeGenSchedModels::CollectProcItin(CodeGenProcModel &ProcModel, + std::vector ItinRecords) { + // Skip empty itinerary. + if (ItinRecords.empty()) + return; + + HasProcItineraries = true; + + ProcModel.ItinDefList.resize(NumItineraryClasses+1); + + // Insert each itinerary data record in the correct position within + // the processor model's ItinDefList. + for (unsigned i = 0, N = ItinRecords.size(); i < N; i++) { + Record *ItinData = ItinRecords[i]; + Record *ItinDef = ItinData->getValueAsDef("TheClass"); + if (!SchedClassIdxMap.count(ItinDef->getName())) { + DEBUG(dbgs() << ProcModel.ItinsDef->getName() + << " has unused itinerary class " << ItinDef->getName() << '\n'); + continue; + } + ProcModel.ItinDefList[getItinClassIdx(ItinDef)] = ItinData; + } +#ifndef NDEBUG + // Check for missing itinerary entries. + assert(!ProcModel.ItinDefList[0] && "NoItinerary class can't have rec"); + for (unsigned i = 1, N = ProcModel.ItinDefList.size(); i < N; ++i) { + if (!ProcModel.ItinDefList[i]) + DEBUG(dbgs() << ProcModel.ItinsDef->getName() + << " missing itinerary for class " << SchedClasses[i].Name << '\n'); + } +#endif +} diff --git a/utils/TableGen/CodeGenSchedule.h b/utils/TableGen/CodeGenSchedule.h new file mode 100644 index 00000000000..9da0145732b --- /dev/null +++ b/utils/TableGen/CodeGenSchedule.h @@ -0,0 +1,172 @@ +//===- CodeGenSchedule.h - Scheduling Machine Models ------------*- C++ -*-===// +// +// The LLVM Compiler Infrastructure +// +// This file is distributed under the University of Illinois Open Source +// License. See LICENSE.TXT for details. +// +//===----------------------------------------------------------------------===// +// +// This file defines structures to encapsulate the machine model as decribed in +// the target description. +// +//===----------------------------------------------------------------------===// + +#ifndef CODEGEN_SCHEDULE_H +#define CODEGEN_SCHEDULE_H + +#include "llvm/TableGen/Record.h" +#include "llvm/Support/ErrorHandling.h" +#include "llvm/ADT/DenseMap.h" +#include "llvm/ADT/StringMap.h" + +namespace llvm { + +class CodeGenTarget; + +// Scheduling class. +// +// Each instruction description will be mapped to a scheduling class. It may be +// an explicitly defined itinerary class, or an inferred class in which case +// ItinClassDef == NULL. +struct CodeGenSchedClass { + std::string Name; + unsigned Index; + Record *ItinClassDef; + + CodeGenSchedClass(): Index(0), ItinClassDef(0) {} + CodeGenSchedClass(Record *rec): Index(0), ItinClassDef(rec) { + Name = rec->getName(); + } +}; + +// Processor model. +// +// ModelName is a unique name used to name an instantiation of MCSchedModel. +// +// ModelDef is NULL for inferred Models. This happens when a processor defines +// an itinerary but no machine model. If the processer defines neither a machine +// model nor itinerary, then ModelDef remains pointing to NoModel. NoModel has +// the special "NoModel" field set to true. +// +// ItinsDef always points to a valid record definition, but may point to the +// default NoItineraries. NoItineraries has an empty list of InstrItinData +// records. +// +// ItinDefList orders this processor's InstrItinData records by SchedClass idx. +struct CodeGenProcModel { + std::string ModelName; + Record *ModelDef; + Record *ItinsDef; + + // Array of InstrItinData records indexed by CodeGenSchedClass::Index. + // The list is empty if the subtarget has no itineraries. + std::vector ItinDefList; + + CodeGenProcModel(const std::string &Name, Record *MDef, Record *IDef): + ModelName(Name), ModelDef(MDef), ItinsDef(IDef) {} +}; + +// Top level container for machine model data. +class CodeGenSchedModels { + RecordKeeper &Records; + const CodeGenTarget &Target; + + // List of unique SchedClasses. + std::vector SchedClasses; + + // Map SchedClass name to itinerary index. + // These are either explicit itinerary classes or inferred classes. + StringMap SchedClassIdxMap; + + // SchedClass indices 1 up to and including NumItineraryClasses identify + // itinerary classes that are explicitly used for this target's instruction + // definitions. NoItinerary always has index 0 regardless of whether it is + // explicitly referenced. + // + // Any inferred SchedClass have a index greater than NumItineraryClasses. + unsigned NumItineraryClasses; + + // List of unique processor models. + std::vector ProcModels; + + // Map Processor's MachineModel + ProcItin fields to a CodeGenProcModel index. + typedef DenseMap, unsigned> ProcModelMapTy; + ProcModelMapTy ProcModelMap; + + // True if any processors have nonempty itineraries. + bool HasProcItineraries; + +public: + CodeGenSchedModels(RecordKeeper& RK, const CodeGenTarget &TGT); + + // Check if any instructions are assigned to an explicit itinerary class other + // than NoItinerary. + bool hasItineraryClasses() const { return NumItineraryClasses > 0; } + + // Return the number of itinerary classes in use by this target's instruction + // descriptions, not including "NoItinerary". + unsigned numItineraryClasses() const { + return NumItineraryClasses; + } + + // Get a SchedClass from its index. + const CodeGenSchedClass &getSchedClass(unsigned Idx) { + assert(Idx < SchedClasses.size() && "bad SchedClass index"); + return SchedClasses[Idx]; + } + + // Get an itinerary class's index. Value indices are '0' for NoItinerary up to + // and including numItineraryClasses(). + unsigned getItinClassIdx(Record *ItinDef) const { + assert(SchedClassIdxMap.count(ItinDef->getName()) && "missing ItinClass"); + unsigned Idx = SchedClassIdxMap.lookup(ItinDef->getName()); + assert(Idx <= NumItineraryClasses && "bad ItinClass index"); + return Idx; + } + + bool hasProcessorItineraries() const { + return HasProcItineraries; + } + + // Get an existing machine model for a processor definition. + const CodeGenProcModel &getProcModel(Record *ProcDef) const { + unsigned idx = getProcModelIdx(ProcDef); + assert(idx < ProcModels.size() && "missing machine model"); + return ProcModels[idx]; + } + + // Iterate over the unique processor models. + typedef std::vector::const_iterator ProcIter; + ProcIter procModelBegin() const { return ProcModels.begin(); } + ProcIter procModelEnd() const { return ProcModels.end(); } + +private: + // Get a key that can uniquely identify a machine model. + ProcModelMapTy::key_type getProcModelKey(Record *ProcDef) const { + Record *ModelDef = ProcDef->getValueAsDef("SchedModel"); + Record *ItinsDef = ProcDef->getValueAsDef("ProcItin"); + return std::make_pair(ModelDef, ItinsDef); + } + + // Get the unique index of a machine model. + unsigned getProcModelIdx(Record *ProcDef) const { + ProcModelMapTy::const_iterator I = + ProcModelMap.find(getProcModelKey(ProcDef)); + if (I == ProcModelMap.end()) + return ProcModels.size(); + return I->second; + } + + // Initialize a new processor model if it is unique. + void addProcModel(Record *ProcDef); + + void CollectSchedClasses(); + void CollectProcModels(); + void CollectProcItin(CodeGenProcModel &ProcModel, + std::vector ItinRecords); +}; + +} // namespace llvm + +#endif diff --git a/utils/TableGen/CodeGenTarget.cpp b/utils/TableGen/CodeGenTarget.cpp index 4bc4c54f8bc..1dd2efc4a1b 100644 --- a/utils/TableGen/CodeGenTarget.cpp +++ b/utils/TableGen/CodeGenTarget.cpp @@ -16,6 +16,7 @@ #include "CodeGenTarget.h" #include "CodeGenIntrinsics.h" +#include "CodeGenSchedule.h" #include "llvm/TableGen/Record.h" #include "llvm/ADT/StringExtras.h" #include "llvm/ADT/STLExtras.h" @@ -112,7 +113,7 @@ std::string llvm::getQualifiedName(const Record *R) { /// getTarget - Return the current instance of the Target class. /// CodeGenTarget::CodeGenTarget(RecordKeeper &records) - : Records(records), RegBank(0) { + : Records(records), RegBank(0), SchedModels(0) { std::vector Targets = Records.getAllDerivedDefinitions("Target"); if (Targets.size() == 0) throw std::string("ERROR: No 'Target' subclasses defined!"); @@ -121,6 +122,10 @@ CodeGenTarget::CodeGenTarget(RecordKeeper &records) TargetRec = Targets[0]; } +CodeGenTarget::~CodeGenTarget() { + delete RegBank; + delete SchedModels; +} const std::string &CodeGenTarget::getName() const { return TargetRec->getName(); @@ -235,6 +240,11 @@ void CodeGenTarget::ReadLegalValueTypes() const { LegalValueTypes.end()); } +CodeGenSchedModels &CodeGenTarget::getSchedModels() const { + if (!SchedModels) + SchedModels = new CodeGenSchedModels(Records, *this); + return *SchedModels; +} void CodeGenTarget::ReadInstructions() const { std::vector Insts = Records.getAllDerivedDefinitions("Instruction"); diff --git a/utils/TableGen/CodeGenTarget.h b/utils/TableGen/CodeGenTarget.h index 85463da5973..2f8cee4588a 100644 --- a/utils/TableGen/CodeGenTarget.h +++ b/utils/TableGen/CodeGenTarget.h @@ -26,6 +26,7 @@ namespace llvm { struct CodeGenRegister; +class CodeGenSchedModels; class CodeGenTarget; // SelectionDAG node properties. @@ -72,9 +73,12 @@ class CodeGenTarget { void ReadInstructions() const; void ReadLegalValueTypes() const; + mutable CodeGenSchedModels *SchedModels; + mutable std::vector InstrsByEnum; public: CodeGenTarget(RecordKeeper &Records); + ~CodeGenTarget(); Record *getTargetRecord() const { return TargetRec; } const std::string &getName() const; @@ -96,7 +100,7 @@ public: /// Record *getAsmParserVariant(unsigned i) const; - /// getAsmParserVariantCount - Return the AssmblyParserVariant definition + /// getAsmParserVariantCount - Return the AssmblyParserVariant definition /// available for this target. /// unsigned getAsmParserVariantCount() const; @@ -139,6 +143,8 @@ public: return false; } + CodeGenSchedModels &getSchedModels() const; + private: DenseMap &getInstructions() const { if (Instructions.empty()) ReadInstructions(); diff --git a/utils/TableGen/InstrInfoEmitter.cpp b/utils/TableGen/InstrInfoEmitter.cpp index 600586ff4ac..3adb8694d9a 100644 --- a/utils/TableGen/InstrInfoEmitter.cpp +++ b/utils/TableGen/InstrInfoEmitter.cpp @@ -14,6 +14,7 @@ #include "CodeGenDAGPatterns.h" +#include "CodeGenSchedule.h" #include "CodeGenTarget.h" #include "SequenceToOffsetTable.h" #include "llvm/ADT/StringExtras.h" @@ -29,10 +30,11 @@ namespace { class InstrInfoEmitter { RecordKeeper &Records; CodeGenDAGPatterns CDP; - std::map ItinClassMap; + const CodeGenSchedModels &SchedModels; public: - InstrInfoEmitter(RecordKeeper &R) : Records(R), CDP(R) { } + InstrInfoEmitter(RecordKeeper &R): + Records(R), CDP(R), SchedModels(CDP.getTargetInfo().getSchedModels()) {} // run - Output the instruction set description. void run(raw_ostream &OS); @@ -47,10 +49,6 @@ private: const OperandInfoMapTy &OpInfo, raw_ostream &OS); - // Itinerary information. - void GatherItinClasses(); - unsigned getItinClassNumber(const Record *InstRec); - // Operand information. void EmitOperandInfo(raw_ostream &OS, OperandInfoMapTy &OperandInfoIDs); std::vector GetOperandInfo(const CodeGenInstruction &Inst); @@ -65,23 +63,6 @@ static void PrintDefList(const std::vector &Uses, OS << "0 };\n"; } -//===----------------------------------------------------------------------===// -// Instruction Itinerary Information. -//===----------------------------------------------------------------------===// - -void InstrInfoEmitter::GatherItinClasses() { - std::vector DefList = - Records.getAllDerivedDefinitions("InstrItinClass"); - std::sort(DefList.begin(), DefList.end(), LessRecord()); - - for (unsigned i = 0, N = DefList.size(); i < N; i++) - ItinClassMap[DefList[i]->getName()] = i; -} - -unsigned InstrInfoEmitter::getItinClassNumber(const Record *InstRec) { - return ItinClassMap[InstRec->getValueAsDef("Itinerary")->getName()]; -} - //===----------------------------------------------------------------------===// // Operand Info Emission. //===----------------------------------------------------------------------===// @@ -202,8 +183,6 @@ void InstrInfoEmitter::run(raw_ostream &OS) { emitSourceFileHeader("Target Instruction Enum Values", OS); emitEnums(OS); - GatherItinClasses(); - emitSourceFileHeader("Target Instruction Descriptors", OS); OS << "\n#ifdef GET_INSTRINFO_MC_DESC\n"; @@ -325,10 +304,11 @@ void InstrInfoEmitter::emitRecord(const CodeGenInstruction &Inst, unsigned Num, MinOperands = Inst.Operands.back().MIOperandNo + Inst.Operands.back().MINumOperands; + Record *ItinDef = Inst.TheDef->getValueAsDef("Itinerary"); OS << " { "; OS << Num << ",\t" << MinOperands << ",\t" << Inst.Operands.NumDefs << ",\t" - << getItinClassNumber(Inst.TheDef) << ",\t" + << SchedModels.getItinClassIdx(ItinDef) << ",\t" << Inst.TheDef->getValueAsInt("Size") << ",\t0"; // Emit all of the target indepedent flags... diff --git a/utils/TableGen/SubtargetEmitter.cpp b/utils/TableGen/SubtargetEmitter.cpp index 1c37d15fe88..48dbdc2c7c2 100644 --- a/utils/TableGen/SubtargetEmitter.cpp +++ b/utils/TableGen/SubtargetEmitter.cpp @@ -12,6 +12,7 @@ //===----------------------------------------------------------------------===// #include "CodeGenTarget.h" +#include "CodeGenSchedule.h" #include "llvm/ADT/StringExtras.h" #include "llvm/MC/MCInstrItineraries.h" #include "llvm/Support/Debug.h" @@ -27,15 +28,12 @@ namespace { class SubtargetEmitter { RecordKeeper &Records; + CodeGenSchedModels &SchedModels; std::string Target; - bool HasItineraries; void Enumeration(raw_ostream &OS, const char *ClassName, bool isBits); unsigned FeatureKeyValues(raw_ostream &OS); unsigned CPUKeyValues(raw_ostream &OS); - unsigned CollectAllItinClasses(raw_ostream &OS, - std::map &ItinClassesMap, - std::vector &ItinClassList); void FormItineraryStageString(const std::string &Names, Record *ItinData, std::string &ItinString, unsigned &NStages); @@ -44,22 +42,23 @@ class SubtargetEmitter { void FormItineraryBypassString(const std::string &Names, Record *ItinData, std::string &ItinString, unsigned NOperandCycles); - void EmitStageAndOperandCycleData(raw_ostream &OS, unsigned NItinClasses, - std::map &ItinClassesMap, - std::vector &ItinClassList, - std::vector > &ProcList); - void EmitItineraryProp(raw_ostream &OS, const Record *R, const char *Name, + void EmitStageAndOperandCycleData(raw_ostream &OS, + std::vector > + &ProcItinLists); + void EmitItineraries(raw_ostream &OS, + std::vector > + &ProcItinLists); + void EmitProcessorProp(raw_ostream &OS, const Record *R, const char *Name, char Separator); - void EmitProcessorData(raw_ostream &OS, - std::vector &ItinClassList, - std::vector > &ProcList); + void EmitProcessorModels(raw_ostream &OS); void EmitProcessorLookup(raw_ostream &OS); - void EmitData(raw_ostream &OS); + void EmitSchedModel(raw_ostream &OS); void ParseFeaturesFunction(raw_ostream &OS, unsigned NumFeatures, unsigned NumProcs); public: - SubtargetEmitter(RecordKeeper &R) : Records(R), HasItineraries(false) {} + SubtargetEmitter(RecordKeeper &R, CodeGenTarget &TGT): + Records(R), SchedModels(TGT.getSchedModels()), Target(TGT.getName()) {} void run(raw_ostream &o); @@ -242,28 +241,6 @@ unsigned SubtargetEmitter::CPUKeyValues(raw_ostream &OS) { return ProcessorList.size(); } -// -// CollectAllItinClasses - Gathers and enumerates all the itinerary classes. -// Returns itinerary class count. -// -unsigned SubtargetEmitter:: -CollectAllItinClasses(raw_ostream &OS, - std::map &ItinClassesMap, - std::vector &ItinClassList) { - // For each itinerary class - unsigned N = ItinClassList.size(); - for (unsigned i = 0; i < N; i++) { - // Next itinerary class - const Record *ItinClass = ItinClassList[i]; - // Get name of itinerary class - // Assign itinerary class a unique number - ItinClassesMap[ItinClass->getName()] = i; - } - - // Return itinerary class count - return N; -} - // // FormItineraryStageString - Compose a string containing the stage // data initialization for the specified itinerary. N is the number @@ -350,32 +327,25 @@ void SubtargetEmitter::FormItineraryBypassString(const std::string &Name, } // -// EmitStageAndOperandCycleData - Generate unique itinerary stages and -// operand cycle tables. Record itineraries for processors. +// EmitStageAndOperandCycleData - Generate unique itinerary stages and operand +// cycle tables. Create a list of InstrItinerary objects (ProcItinLists) indexed +// by CodeGenSchedClass::Index. // -void SubtargetEmitter::EmitStageAndOperandCycleData(raw_ostream &OS, - unsigned NItinClasses, - std::map &ItinClassesMap, - std::vector &ItinClassList, - std::vector > &ProcList) { - // Gather processor iteraries - std::vector ProcItinList = - Records.getAllDerivedDefinitions("ProcessorItineraries"); - - // If just no itinerary then don't bother - if (ProcItinList.size() < 2) return; +void SubtargetEmitter:: +EmitStageAndOperandCycleData(raw_ostream &OS, + std::vector > + &ProcItinLists) { // Emit functional units for all the itineraries. - for (unsigned i = 0, N = ProcItinList.size(); i < N; ++i) { - // Next record - Record *Proc = ProcItinList[i]; + for (CodeGenSchedModels::ProcIter PI = SchedModels.procModelBegin(), + PE = SchedModels.procModelEnd(); PI != PE; ++PI) { - std::vector FUs = Proc->getValueAsListOfDefs("FU"); + std::vector FUs = PI->ItinsDef->getValueAsListOfDefs("FU"); if (FUs.empty()) continue; - const std::string &Name = Proc->getName(); - OS << "\n// Functional units for itineraries \"" << Name << "\"\n" + const std::string &Name = PI->ItinsDef->getName(); + OS << "\n// Functional units for \"" << Name << "\"\n" << "namespace " << Name << "FU {\n"; for (unsigned j = 0, FUN = FUs.size(); j < FUN; ++j) @@ -384,7 +354,7 @@ void SubtargetEmitter::EmitStageAndOperandCycleData(raw_ostream &OS, OS << "}\n"; - std::vector BPs = Proc->getValueAsListOfDefs("BP"); + std::vector BPs = PI->ItinsDef->getValueAsListOfDefs("BP"); if (BPs.size()) { OS << "\n// Pipeline forwarding pathes for itineraries \"" << Name << "\"\n" << "namespace " << Name << "Bypass {\n"; @@ -411,49 +381,56 @@ void SubtargetEmitter::EmitStageAndOperandCycleData(raw_ostream &OS, // Begin pipeline bypass table std::string BypassTable = "extern const unsigned " + Target + "ForwardingPaths[] = {\n"; - BypassTable += " 0, // No itinerary\n"; + BypassTable += " 0, // No itinerary\n"; + // For each Itinerary across all processors, add a unique entry to the stages, + // operand cycles, and pipepine bypess tables. Then add the new Itinerary + // object with computed offsets to the ProcItinLists result. unsigned StageCount = 1, OperandCycleCount = 1; std::map ItinStageMap, ItinOperandMap; - for (unsigned i = 0, N = ProcItinList.size(); i < N; i++) { - // Next record - Record *Proc = ProcItinList[i]; + for (CodeGenSchedModels::ProcIter PI = SchedModels.procModelBegin(), + PE = SchedModels.procModelEnd(); PI != PE; ++PI) { + const CodeGenProcModel &ProcModel = *PI; - // Get processor itinerary name - const std::string &Name = Proc->getName(); + // Add process itinerary to the list. + ProcItinLists.resize(ProcItinLists.size()+1); - // Get itinerary data list - std::vector ItinDataList = Proc->getValueAsListOfDefs("IID"); - std::vector ItinList; - - // Add an empty itinerary. - if (ItinDataList.empty()) { - ProcList.push_back(ItinList); + // If this processor defines no itineraries, then leave the itinerary list + // empty. + std::vector &ItinList = ProcItinLists.back(); + if (ProcModel.ItinDefList.empty()) continue; - } - // Expand processor itinerary to cover all itinerary classes - ItinList.resize(NItinClasses); + // Reserve index==0 for NoItinerary. + ItinList.resize(SchedModels.numItineraryClasses()+1); + + const std::string &Name = ProcModel.ItinsDef->getName(); // For each itinerary data - for (unsigned j = 0, M = ItinDataList.size(); j < M; j++) { + for (unsigned SchedClassIdx = 0, + SchedClassEnd = ProcModel.ItinDefList.size(); + SchedClassIdx < SchedClassEnd; ++SchedClassIdx) { + // Next itinerary data - Record *ItinData = ItinDataList[j]; + Record *ItinData = ProcModel.ItinDefList[SchedClassIdx]; // Get string and stage count std::string ItinStageString; - unsigned NStages; - FormItineraryStageString(Name, ItinData, ItinStageString, NStages); + unsigned NStages = 0; + if (ItinData) + FormItineraryStageString(Name, ItinData, ItinStageString, NStages); // Get string and operand cycle count std::string ItinOperandCycleString; - unsigned NOperandCycles; - FormItineraryOperandCycleString(ItinData, ItinOperandCycleString, - NOperandCycles); - + unsigned NOperandCycles = 0; std::string ItinBypassString; - FormItineraryBypassString(Name, ItinData, ItinBypassString, - NOperandCycles); + if (ItinData) { + FormItineraryOperandCycleString(ItinData, ItinOperandCycleString, + NOperandCycles); + + FormItineraryBypassString(Name, ItinData, ItinBypassString, + NOperandCycles); + } // Check to see if stage already exists and create if it doesn't unsigned FindStage = 0; @@ -493,33 +470,26 @@ void SubtargetEmitter::EmitStageAndOperandCycleData(raw_ostream &OS, } } - // Locate where to inject into processor itinerary table - const std::string &Name = ItinData->getValueAsDef("TheClass")->getName(); - unsigned Find = ItinClassesMap[Name]; - // Set up itinerary as location and location + stage count - int NumUOps = ItinData->getValueAsInt("NumMicroOps"); + int NumUOps = ItinData ? ItinData->getValueAsInt("NumMicroOps") : 0; InstrItinerary Intinerary = { NumUOps, FindStage, FindStage + NStages, FindOperandCycle, FindOperandCycle + NOperandCycles}; // Inject - empty slots will be 0, 0 - ItinList[Find] = Intinerary; + ItinList[SchedClassIdx] = Intinerary; } - - // Add process itinerary to list - ProcList.push_back(ItinList); } // Closing stage - StageTable += " { 0, 0, 0, llvm::InstrStage::Required } // End itinerary\n"; + StageTable += " { 0, 0, 0, llvm::InstrStage::Required } // End stages\n"; StageTable += "};\n"; // Closing operand cycles - OperandCycleTable += " 0 // End itinerary\n"; + OperandCycleTable += " 0 // End operand cycles\n"; OperandCycleTable += "};\n"; - BypassTable += " 0 // End itinerary\n"; + BypassTable += " 0 // End bypass tables\n"; BypassTable += "};\n"; // Emit tables. @@ -528,89 +498,91 @@ void SubtargetEmitter::EmitStageAndOperandCycleData(raw_ostream &OS, OS << BypassTable; } -void SubtargetEmitter::EmitItineraryProp(raw_ostream &OS, const Record *R, +// +// EmitProcessorData - Generate data for processor itineraries that were +// computed during EmitStageAndOperandCycleData(). ProcItinLists lists all +// Itineraries for each processor. The Itinerary lists are indexed on +// CodeGenSchedClass::Index. +// +void SubtargetEmitter:: +EmitItineraries(raw_ostream &OS, + std::vector > &ProcItinLists) { + + // For each processor's machine model + std::vector >::iterator + ProcItinListsIter = ProcItinLists.begin(); + for (CodeGenSchedModels::ProcIter PI = SchedModels.procModelBegin(), + PE = SchedModels.procModelEnd(); PI != PE; ++PI) { + Record *ItinsDef = PI->ItinsDef; + + // Get processor itinerary name + const std::string &Name = ItinsDef->getName(); + + // Get the itinerary list for the processor. + assert(ProcItinListsIter != ProcItinLists.end() && "bad iterator"); + std::vector &ItinList = *ProcItinListsIter++; + + OS << "\n"; + OS << "static const llvm::InstrItinerary "; + if (ItinList.empty()) { + OS << '*' << Name << " = 0;\n"; + continue; + } + + // Begin processor itinerary table + OS << Name << "[] = {\n"; + + // For each itinerary class in CodeGenSchedClass::Index order. + for (unsigned j = 0, M = ItinList.size(); j < M; ++j) { + InstrItinerary &Intinerary = ItinList[j]; + + // Emit Itinerary in the form of + // { firstStage, lastStage, firstCycle, lastCycle } // index + OS << " { " << + Intinerary.NumMicroOps << ", " << + Intinerary.FirstStage << ", " << + Intinerary.LastStage << ", " << + Intinerary.FirstOperandCycle << ", " << + Intinerary.LastOperandCycle << " }" << + ", // " << j << " " << SchedModels.getSchedClass(j).Name << "\n"; + } + // End processor itinerary table + OS << " { 0, ~0U, ~0U, ~0U, ~0U } // end marker\n"; + OS << "};\n"; + } +} + +// Emit either the the value defined in the TableGen Record, or the default +// value defined in the C++ header. The Record is null if the processor does not +// define a model. +void SubtargetEmitter::EmitProcessorProp(raw_ostream &OS, const Record *R, const char *Name, char Separator) { OS << " "; - int V = R->getValueAsInt(Name); + int V = R ? R->getValueAsInt(Name) : -1; if (V >= 0) OS << V << Separator << " // " << Name; else - OS << "InstrItineraryProps::Default" << Name << Separator; + OS << "MCSchedModel::Default" << Name << Separator; OS << '\n'; } -// -// EmitProcessorData - Generate data for processor itineraries. -// -void SubtargetEmitter:: -EmitProcessorData(raw_ostream &OS, - std::vector &ItinClassList, - std::vector > &ProcList) { - - // Get an iterator for processor itinerary stages - std::vector >::iterator - ProcListIter = ProcList.begin(); - - // For each processor itinerary - std::vector Itins = - Records.getAllDerivedDefinitions("ProcessorItineraries"); - for (unsigned i = 0, N = Itins.size(); i < N; i++) { - // Next record - Record *Itin = Itins[i]; - - // Get processor itinerary name - const std::string &Name = Itin->getName(); - +void SubtargetEmitter::EmitProcessorModels(raw_ostream &OS) { + // For each processor model. + for (CodeGenSchedModels::ProcIter PI = SchedModels.procModelBegin(), + PE = SchedModels.procModelEnd(); PI != PE; ++PI) { // Skip default // Begin processor itinerary properties OS << "\n"; - OS << "static const llvm::InstrItineraryProps " << Name << "Props(\n"; - EmitItineraryProp(OS, Itin, "IssueWidth", ','); - EmitItineraryProp(OS, Itin, "MinLatency", ','); - EmitItineraryProp(OS, Itin, "LoadLatency", ','); - EmitItineraryProp(OS, Itin, "HighLatency", ' '); - OS << ");\n"; - - // For each itinerary class - std::vector &ItinList = *ProcListIter++; - if (!ItinList.empty()) { - assert(ItinList.size() == ItinClassList.size() && "bad itinerary"); - - // Begin processor itinerary table - OS << "\n"; - OS << "static const llvm::InstrItinerary " << Name << "Entries" - << "[] = {\n"; - - for (unsigned j = 0, M = ItinList.size(); j < M; ++j) { - InstrItinerary &Intinerary = ItinList[j]; - - // Emit in the form of - // { firstStage, lastStage, firstCycle, lastCycle } // index - if (Intinerary.FirstStage == 0) { - OS << " { 1, 0, 0, 0, 0 }"; - } else { - OS << " { " << - Intinerary.NumMicroOps << ", " << - Intinerary.FirstStage << ", " << - Intinerary.LastStage << ", " << - Intinerary.FirstOperandCycle << ", " << - Intinerary.LastOperandCycle << " }"; - } - OS << ", // " << j << " " << ItinClassList[j]->getName() << "\n"; - } - // End processor itinerary table - OS << " { 1, ~0U, ~0U, ~0U, ~0U } // end marker\n"; - OS << "};\n"; - } - OS << '\n'; - OS << "static const llvm::InstrItinerarySubtargetValue " - << Name << " = {\n"; - OS << " &" << Name << "Props,\n"; - if (ItinList.empty()) - OS << " 0\n"; + OS << "static const llvm::MCSchedModel " << PI->ModelName << "(\n"; + EmitProcessorProp(OS, PI->ModelDef, "IssueWidth", ','); + EmitProcessorProp(OS, PI->ModelDef, "MinLatency", ','); + EmitProcessorProp(OS, PI->ModelDef, "LoadLatency", ','); + EmitProcessorProp(OS, PI->ModelDef, "HighLatency", ','); + if (SchedModels.hasItineraryClasses()) + OS << " " << PI->ItinsDef->getName(); else - OS << " " << Name << "Entries\n"; - OS << "};\n"; + OS << " 0"; + OS << ");\n"; } } @@ -627,7 +599,7 @@ void SubtargetEmitter::EmitProcessorLookup(raw_ostream &OS) { OS << "\n"; OS << "// Sorted (by key) array of itineraries for CPU subtype.\n" << "extern const llvm::SubtargetInfoKV " - << Target << "ProcItinKV[] = {\n"; + << Target << "ProcSchedKV[] = {\n"; // For each processor for (unsigned i = 0, N = ProcessorList.size(); i < N;) { @@ -635,13 +607,13 @@ void SubtargetEmitter::EmitProcessorLookup(raw_ostream &OS) { Record *Processor = ProcessorList[i]; const std::string &Name = Processor->getValueAsString("Name"); - const std::string &ProcItin = - Processor->getValueAsDef("ProcItin")->getName(); + const std::string &ProcModelName = + SchedModels.getProcModel(Processor).ModelName; // Emit as { "cpu", procinit }, OS << " { " << "\"" << Name << "\", " - << "(void *)&" << ProcItin; + << "(void *)&" << ProcModelName; OS << " }"; @@ -656,31 +628,19 @@ void SubtargetEmitter::EmitProcessorLookup(raw_ostream &OS) { } // -// EmitData - Emits all stages and itineries, folding common patterns. +// EmitSchedModel - Emits all scheduling model tables, folding common patterns. // -void SubtargetEmitter::EmitData(raw_ostream &OS) { - std::map ItinClassesMap; - // Gather and sort all itinerary classes - std::vector ItinClassList = - Records.getAllDerivedDefinitions("InstrItinClass"); - std::sort(ItinClassList.begin(), ItinClassList.end(), LessRecord()); - - // Enumerate all the itinerary classes - unsigned NItinClasses = CollectAllItinClasses(OS, ItinClassesMap, - ItinClassList); - // Make sure the rest is worth the effort - HasItineraries = NItinClasses != 1; // Ignore NoItinerary. - - if (HasItineraries) { - std::vector > ProcList; +void SubtargetEmitter::EmitSchedModel(raw_ostream &OS) { + if (SchedModels.hasItineraryClasses()) { + std::vector > ProcItinLists; // Emit the stage data - EmitStageAndOperandCycleData(OS, NItinClasses, ItinClassesMap, - ItinClassList, ProcList); - // Emit the processor itinerary data - EmitProcessorData(OS, ItinClassList, ProcList); - // Emit the processor lookup data - EmitProcessorLookup(OS); + EmitStageAndOperandCycleData(OS, ProcItinLists); + EmitItineraries(OS, ProcItinLists); } + // Emit the processor machine model + EmitProcessorModels(OS); + // Emit the processor lookup data + EmitProcessorLookup(OS); } // @@ -734,8 +694,6 @@ void SubtargetEmitter::ParseFeaturesFunction(raw_ostream &OS, // SubtargetEmitter::run - Main subtarget enumeration emitter. // void SubtargetEmitter::run(raw_ostream &OS) { - Target = CodeGenTarget(Records).getName(); - emitSourceFileHeader("Subtarget Enumeration Source Fragment", OS); OS << "\n#ifdef GET_SUBTARGETINFO_ENUM\n"; @@ -757,7 +715,7 @@ void SubtargetEmitter::run(raw_ostream &OS) { OS << "\n"; unsigned NumProcs = CPUKeyValues(OS); OS << "\n"; - EmitData(OS); + EmitSchedModel(OS); OS << "\n"; #if 0 OS << "}\n"; @@ -776,8 +734,8 @@ void SubtargetEmitter::run(raw_ostream &OS) { OS << Target << "SubTypeKV, "; else OS << "0, "; - if (HasItineraries) { - OS << Target << "ProcItinKV, " + if (SchedModels.hasItineraryClasses()) { + OS << Target << "ProcSchedKV, " << Target << "Stages, " << Target << "OperandCycles, " << Target << "ForwardingPaths, "; @@ -822,8 +780,8 @@ void SubtargetEmitter::run(raw_ostream &OS) { OS << "namespace llvm {\n"; OS << "extern const llvm::SubtargetFeatureKV " << Target << "FeatureKV[];\n"; OS << "extern const llvm::SubtargetFeatureKV " << Target << "SubTypeKV[];\n"; - if (HasItineraries) { - OS << "extern const llvm::SubtargetInfoKV " << Target << "ProcItinKV[];\n"; + if (SchedModels.hasItineraryClasses()) { + OS << "extern const llvm::SubtargetInfoKV " << Target << "ProcSchedKV[];\n"; OS << "extern const llvm::InstrStage " << Target << "Stages[];\n"; OS << "extern const unsigned " << Target << "OperandCycles[];\n"; OS << "extern const unsigned " << Target << "ForwardingPaths[];\n"; @@ -841,8 +799,8 @@ void SubtargetEmitter::run(raw_ostream &OS) { OS << Target << "SubTypeKV, "; else OS << "0, "; - if (HasItineraries) { - OS << Target << "ProcItinKV, " + if (SchedModels.hasItineraryClasses()) { + OS << Target << "ProcSchedKV, " << Target << "Stages, " << Target << "OperandCycles, " << Target << "ForwardingPaths, "; @@ -857,7 +815,8 @@ void SubtargetEmitter::run(raw_ostream &OS) { namespace llvm { void EmitSubtarget(RecordKeeper &RK, raw_ostream &OS) { - SubtargetEmitter(RK).run(OS); + CodeGenTarget CGTarget(RK); + SubtargetEmitter(RK, CGTarget).run(OS); } } // End llvm namespace