This patch adds the zero instruction for zeroing a list of 64-bit
element ZA tiles. The instruction takes a list of up to eight tiles
ZA0.D-ZA7.D, which must be in order, e.g.
zero {za0.d,za1.d,za2.d,za3.d,za4.d,za5.d,za6.d,za7.d}
zero {za1.d,za3.d,za5.d,za7.d}
The assembler also accepts 32-bit, 16-bit and 8-bit element tiles which
are mapped to corresponding 64-bit element tiles in accordance with the
architecturally defined mapping between different element size tiles,
e.g.
* Zeroing ZA0.B, or the entire array name ZA, is equivalent to zeroing
all eight 64-bit element tiles ZA0.D to ZA7.D.
* Zeroing ZA0.S is equivalent to zeroing ZA0.D and ZA4.D.
The preferred disassembly of this instruction uses the shortest list of
tile names that represent the encoded immediate mask, e.g.
* An immediate which encodes 64-bit element tiles ZA0.D, ZA1.D, ZA4.D and
ZA5.D is disassembled as {ZA0.S, ZA1.S}.
* An immediate which encodes 64-bit element tiles ZA0.D, ZA2.D, ZA4.D and
ZA6.D is disassembled as {ZA0.H}.
* An all-ones immediate is disassembled as {ZA}.
* An all-zeros immediate is disassembled as an empty list {}.
This patch adds the MatrixTileList asm operand and related parsing to support
this.
Depends on D105570.
The reference can be found here:
https://developer.arm.com/documentation/ddi0602/2021-06
Reviewed By: david-arm
Differential Revision: https://reviews.llvm.org/D105575
This patch adds the new system registers introduced in SME:
- ID_AA64SMFR0_EL1 (ro) SME feature identifier.
- SMCR_ELx (r/w) streaming mode control register for configuring
effective SVE Streaming SVE Vector length when the PE is in
Streaming SVE mode.
- SVCR (r/w) streaming vector control register, visible at all
exception levels. Provides access to PSTATE.SM and PSTATE.ZA
using MSR and MRS instructions.
- SMPRI_EL1 (r/w) streaming mode execution priority register.
- SMPRIMAP_EL2 (r/w) streaming mode priority mapping register.
- SMIDR_EL1 (ro) streaming mode identification register.
- TPIDR2_EL0 (r/w) for use by SME software to manage per-thread
SME context.
- MPAMSM_EL1 (r/w) MPAM (v8.4) streaming mode register, for
labelling memory accesses performed in streaming mode.
Also added in this patch are the SME mode change instructions.
Three MSR immediate instructions are implemented to set or clear
PSTATE.SM, PSTATE.ZA, or both respectively:
- MSR SVCRSM, #<imm1>
- MSR SVCRZA, #<imm1>
- MSR SVCRSMZA, #<imm1>
The following smstart/smstop aliases are also implemented for
convenience:
smstart -> MSR SVCRSMZA, #1
smstart sm -> MSR SVCRSM, #1
smstart za -> MSR SVCRZA, #1
smstop -> MSR SVCRSMZA, #0
smstop sm -> MSR SVCRSM, #0
smstop za -> MSR SVCRZA, #0
The reference can be found here:
https://developer.arm.com/documentation/ddi0602/2021-06
Reviewed By: david-arm
Differential Revision: https://reviews.llvm.org/D105576
This patch adds support for following contiguous load and store
instructions:
* LD1B, LD1H, LD1W, LD1D, LD1Q
* ST1B, ST1H, ST1W, ST1D, ST1Q
A new register class and operand is added for the 32-bit vector select
register W12-W15. The differences in the following tests which have been
re-generated are caused by the introduction of this register class:
* llvm/test/CodeGen/AArch64/GlobalISel/irtranslator-inline-asm.ll
* llvm/test/CodeGen/AArch64/GlobalISel/regbank-inlineasm.mir
* llvm/test/CodeGen/AArch64/stp-opt-with-renaming-reserved-regs.mir
* llvm/test/CodeGen/AArch64/stp-opt-with-renaming.mir
D88663 attempts to resolve the issue with the store pair test
differences in the AArch64 load/store optimizer.
The GlobalISel differences are caused by changes in the enum values of
register classes, tests have been updated with the new values.
The reference can be found here:
https://developer.arm.com/documentation/ddi0602/2021-06
Reviewed By: CarolineConcatto
Differential Revision: https://reviews.llvm.org/D105572
SME introduces the ZA array, a new piece of architectural register state
consisting of a matrix of [SVLb x SVLb] bytes, where SVL is the
implementation defined Streaming SVE vector length and SVLb is the
number of 8-bit elements in a vector of SVL bits.
SME instructions consist of three types of matrix operands:
* Tiles: a ZA tile is a square, two-dimensional sub-array of elements
within the ZA array. These tiles make up the larger accumulator array
and the granularity varies based on the element size, i.e.
- ZAQ0..ZAQ15 (smallest tile granule)
- ZAD0..ZAD7
- ZAS0..ZAS3
- ZAH0..ZAH1
or ZAB0 (largest tile granule, single tile)
* Tile vectors: similar to regular tiles, but have an extra 'h' or 'v'
to tell how the vector at [reg+offset] is layed out in the tile,
horizontally or vertically. E.g. za1h.h or za15v.q, which corresponds
to vectors in registers ZAH1 and ZAQ15, respectively.
* Accumulator matrix: this is the entire accumulator array ZA.
This patch adds the register classes and related operands and parsing
for SME instructions operating on the accumulator array.
The ADDHA and ADDVA instructions which operate on tiles are also added
in this patch to make some use of the code added, later patches will
make use of the other operands introduced here.
The reference can be found here:
https://developer.arm.com/documentation/ddi0602/2021-06
Co-authored by: Sander de Smalen (@sdesmalen)
Reviewed By: david-arm
Differential Revision: https://reviews.llvm.org/D105570
This adds support for Armv9-A's Realm Management Extension, including
three new system registers - MFAR_EL3, GPCCR_EL3 and GPTBR_EL3 - and
four new TLBI instructions.
The reference for the Realm Management Extension can be found at: https://developer.arm.com/documentation/ddi0615/aa.
Based on patches by Victor Campos.
Reviewed By: dmgreen
Differential Revision: https://reviews.llvm.org/D104773
This is a mechanical change. This actually also renames the
similarly named methods in the SmallString class, however these
methods don't seem to be used outside of the llvm subproject, so
this doesn't break building of the rest of the monorepo.
The prevailing style does not add the message. The directive name is not useful
because the next line replicates the error line which includes the directive.
The Arm Architecture Reference Manual says that the SystemHintOp_BTI
opcode is prefered when CRm:op2 matches 0100:xx0, but llvm-mc
currently accepts 0100:xxx, which isn't right.
Differential Revision: https://reviews.llvm.org/D102415
This untangles the MCContext and the MCObjectFileInfo. There is a circular
dependency between MCContext and MCObjectFileInfo. Currently this dependency
also exists during construction: You can't contruct a MOFI without a MCContext
without constructing the MCContext with a dummy version of that MOFI first.
This removes this dependency during construction. In a perfect world,
MCObjectFileInfo wouldn't depend on MCContext at all, but only be stored in the
MCContext, like other MC information. This is future work.
This also shifts/adds more information to the MCContext making it more
available to the different targets. Namely:
- TargetTriple
- ObjectFileType
- SubtargetInfo
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D101462
Making VectorIndex an `int` instead of `unsigned`, silences the warning:
comparison of unsigned expression in ‘>= 0’ is always true
in:
template <int Min, int Max>
DiagnosticPredicate isVectorIndex() const {
...
if (VectorIndex.Val >= Min && VectorIndex.Val <= Max)
return DiagnosticPredicateTy::Match;
...
}
when Min is 0.
Add the aarch64[_be]-*-gnu_ilp32 targets to support the GNU ILP32 ABI for AArch64.
The needed codegen changes were mostly already implemented in D61259, which added support for the watchOS ILP32 ABI. The main changes are:
- Wiring up the new target to enable ILP32 codegen and MC.
- ILP32 va_list support.
- ILP32 TLSDESC relocation support.
There was existing MC support for ELF ILP32 relocations from D25159 which could be enabled by passing "-target-abi ilp32" to llvm-mc. This was changed to check for "gnu_ilp32" in the target triple instead. This shouldn't cause any issues since the existing support was slightly broken: it was generating ELF64 objects instead of the ELF32 object files expected by the GNU ILP32 toolchain.
This target has been tested by running the full rustc testsuite on a big-endian ILP32 system based on the GCC ILP32 toolchain.
Reviewed By: kristof.beyls
Differential Revision: https://reviews.llvm.org/D94143
BRB IALL: Invalidate the Branch Record Buffer
BRB INJ: Branch Record Injection into the Branch Record Buffer
Parser changes based on work by Simon Tatham.
These are two-word mnemonics. The assembly parser works by special-casing
the mnemonic in order to parse the second word as a plain identifier token.
Reviewed by: MarkMurrayARM
Differential Revision: https://reviews.llvm.org/D93899
This adds support for the 'ls64' AArch64 extension to the `.arch_extension`
asm directive.
Reviewed By: ostannard
Differential Revision: https://reviews.llvm.org/D92574
This introduces command-line support for the 'armv8.7-a' architecture name
(and an alias without the '-', as usual), and for the 'ls64' extension name.
Based on patches written by Simon Tatham.
Reviewed By: ostannard
Differential Revision: https://reviews.llvm.org/D91776
This adds a GPR64x8 register class that will be needed as the data
operand to the LD64B/ST64B family of instructions in the v8.7-A
Accelerator Extension, which load or store a contiguous range of eight
x-regs. It has to be its own register class so that register allocation
will have visibility of the full set of registers actually read/written
by the instructions, which will be needed when we add intrinsics and/or
inline asm access to this piece of architecture.
Patch written by Simon Tatham.
Reviewed By: ostannard
Differential Revision: https://reviews.llvm.org/D91774
This introduces support for the v8.7-A architecture through a new
subtarget feature called "v8.7a". It adds two new "WFET" and "WFIT"
instructions, the nXS limited-TLB-maintenance qualifier for DSB and TLBI
instructions, a new CPU id register, ID_AA64ISAR2_EL1, and the new
HCRX_EL2 system register.
Based on patches written by Simon Tatham and Victor Campos.
Reviewed By: ostannard
Differential Revision: https://reviews.llvm.org/D91772
This enables the capturing of multiple required features in the AArch64
AsmParser's SysAlias error messages.
Reviewed By: ostannard
Differential Revision: https://reviews.llvm.org/D92388
No longer rely on an external tool to build the llvm component layout.
Instead, leverage the existing `add_llvm_componentlibrary` cmake function and
introduce `add_llvm_component_group` to accurately describe component behavior.
These function store extra properties in the created targets. These properties
are processed once all components are defined to resolve library dependencies
and produce the header expected by llvm-config.
Differential Revision: https://reviews.llvm.org/D90848
Only the aliases 'xzr' and 'sp' exist for the physical register x31.
The reason for wanting to remove the alias 'x31' is because it allows users
to write invalid asm that is not accepted by the GNU assembler.
Is there any objection to removing this alias? Or do we want to keep
this for compatibility with existing code that uses w31/x31?
Differential Revision: https://reviews.llvm.org/D90153
A dynamic linker with lazy binding support may need to handle variant
PCS function symbols specially, so an ELF symbol table marking
STO_AARCH64_VARIANT_PCS [1] was added to address this.
Function symbols that follow the vector PCS are marked via the
.variant_pcs assembler directive, which takes a single parameter
specifying the symbol name and sets the STO_AARCH64_VARIANT_PCS st_other
flag in the object file.
[1] https://github.com/ARM-software/abi-aa/blob/master/aaelf64/aaelf64.rst#st-other-values
Reviewed By: sdesmalen
Differential Revision: https://reviews.llvm.org/D89138
This adds support for -mcpu=cortex-r82. Some more information about this
core can be found here:
https://www.arm.com/products/silicon-ip-cpu/cortex-r/cortex-r82
One note about the system register: that is a bit of a refactoring because of
small differences between v8.4-A AArch64 and v8-R AArch64.
This is based on patches from Mark Murray and Mikhail Maltsev.
Differential Revision: https://reviews.llvm.org/D88660
Convert 2-byte opcodes to equivalent 1-byte ones.
Adjust the existing exhaustive testcase to avoid being altered by
the simplification rules (to keep that test exercising all individual
opcodes).
Fix the assembler parser limits for register pairs; for .seh_save_regp
and .seh_save_regp_x, we can allow up to x29, for a x29+x30 pair
(which gets remapped to the UOP_SaveFPLR(X) opcodes), for .seh_save_fregp
and .seh_save_fregpx, allow up to d14+d15.
Not creating .seh_save_next for float register pairs, as the
actual unwinder implementation in current versions of Windows is buggy
for that case.
This gives a minimal but measurable size reduction. (For a 6.5 MB
DLL with 300 KB .xdata, the .xdata shrinks by 48 bytes. The opcode
sequences are padded to a 4 byte boundary, so very small improvements
might not end up mattering directly.)
Differential Revision: https://reviews.llvm.org/D87367
Add support in llvm-readobj for displaying them and support in the
asm parsser, AArch64TargetStreamer and MCWin64EH for emitting them.
The directives for the remaining basic opcodes have names that
match the opcode in the documentation.
The directives for custom stack cases, that are named
MSFT_OP_TRAP_FRAME, MSFT_OP_MACHINE_FRAME, MSFT_OP_CONTEXT
and MSFT_OP_CLEAR_UNWOUND_TO_CALL, are given matching assembler
directive names that fit into the rest of the opcode naming;
.seh_trap_frame, .seh_context, .seh_clear_unwound_to_call
The opcode MSFT_OP_MACHINE_FRAME is mapped to the existing
opecode enum UOP_PushMachFrame that is used on x86_64, and also
uses the corresponding existing x86_64 directive name
.seh_pushframe.
Differential Revision: https://reviews.llvm.org/D86889
This ensures that you get the same output regardless if generating
code directly to an object file or if generating assembly and
assembling that.
Add implementations of the EmitARM64WinCFI*() methods in
AArch64TargetAsmStreamer, and fill in one blank in MCAsmStreamer.
Add corresponding directive handlers in AArch64AsmParser and
COFFAsmParser.
Some SEH directive names have been picked to match the prior art
for SEH assembly directives for x86_64, e.g. the spelling of
".seh_startepilogue" matching the preexisting ".seh_endprologue".
For the directives for saving registers, the exact spelling
from the arm64 documentation is picked, e.g. ".seh_save_reg" (to follow
that naming for all the other ones, e.g. ".seh_save_fregp_x"), while
the corresponding one for x86_64 is plain ".seh_savereg" without the
second underscore.
Directives in the epilogues have the same names as in prologues,
e.g. .seh_savereg, even though the registers are restored, not
saved, at that point.
Differential Revision: https://reviews.llvm.org/D86529
A couple of AArch64 tests were failing on Solaris, both sparc and x86:
LLVM :: MC/AArch64/SVE/add-diagnostics.s
LLVM :: MC/AArch64/SVE/cpy-diagnostics.s
LLVM :: MC/AArch64/SVE/cpy.s
LLVM :: MC/AArch64/SVE/dup-diagnostics.s
LLVM :: MC/AArch64/SVE/dup.s
LLVM :: MC/AArch64/SVE/mov-diagnostics.s
LLVM :: MC/AArch64/SVE/mov.s
LLVM :: MC/AArch64/SVE/sqadd-diagnostics.s
LLVM :: MC/AArch64/SVE/sqsub-diagnostics.s
LLVM :: MC/AArch64/SVE/sub-diagnostics.s
LLVM :: MC/AArch64/SVE/subr-diagnostics.s
LLVM :: MC/AArch64/SVE/uqadd-diagnostics.s
LLVM :: MC/AArch64/SVE/uqsub-diagnostics.s
For example, reduced from `MC/AArch64/SVE/add-diagnostics.s`:
add z0.b, z0.b, #0, lsl #8
missed the expected diagnostics
$ ./bin/llvm-mc -triple=aarch64 -show-encoding -mattr=+sve add.s
add.s:1:21: error: immediate must be an integer in range [0, 255] with a shift amount of 0
add z0.b, z0.b, #0, lsl #8
^
The message is `Match_InvalidSVEAddSubImm8`, emitted in the generated
`lib/Target/AArch64/AArch64GenAsmMatcher.inc` for `MCK_SVEAddSubImm8`.
When comparing the call to `::AArch64Operand::isSVEAddSubImm<char>` on both
Linux/x86_64 and Solaris, I find
875 bool IsByte = std::is_same<int8_t, std::make_signed_t<T>>::value;
is `false` on Solaris, unlike Linux.
The problem boils down to the fact that `int8_t` is plain `char` on
Solaris: both the sparc and i386 psABIs have `char` as signed. However,
with
9887 DiagnosticPredicate DP(Operand.isSVEAddSubImm<int8_t>());
in `lib/Target/AArch64/AArch64GenAsmMatcher.inc`, `std::make_signed_t<int8_t>`
above yieds `signed char`, so `std::is_same<int8_t, signed char>` is `false`.
This can easily be fixed by also allowing for `int8_t` here and in a few
similar places.
Tested on `amd64-pc-solaris2.11`, `sparcv9-sun-solaris2.11`, and
`x86_64-pc-linux-gnu`.
Differential Revision: https://reviews.llvm.org/D85225
The switch in AArch64Operand::print was changed in D45688 so the shift
can be printed after printing the register. This is implemented with
LLVM_FALLTHROUGH and was broken in D52485 when BTIHint was put between
the register and shift operands.
Reviewed By: ostannard
Differential Revision: https://reviews.llvm.org/D86535
This patch implements initial backend support for a -mtune CPU controlled by a "tune-cpu" function attribute. If the attribute is not present X86 will use the resolved CPU from target-cpu attribute or command line.
This patch adds MC layer support a tune CPU. Each CPU now has two sets of features stored in their GenSubtargetInfo.inc tables . These features lists are passed separately to the Processor and ProcessorModel classes in tablegen. The tune list defaults to an empty list to avoid changes to non-X86. This annoyingly increases the size of static tables on all target as we now store 24 more bytes per CPU. I haven't quantified the overall impact, but I can if we're concerned.
One new test is added to X86 to show a few tuning features with mismatched tune-cpu and target-cpu/target-feature attributes to demonstrate independent control. Another new test is added to demonstrate that the scheduler model follows the tune CPU.
I have not added a -mtune to llc/opt or MC layer command line yet. With no attributes we'll just use the -mcpu for both. MC layer tools will always follow the normal CPU for tuning.
Differential Revision: https://reviews.llvm.org/D85165
AArch64 does not support enabling rcpc via .arch_extension in assembly.
GCC, on the other hand, does.
This patch adds 'rcpc' as a valid value to .arch_extension handling.
Differential Revision: https://reviews.llvm.org/D83685
Summary:
In the parsing of BTIHint, PSBHint and Prefetch the identifier token
should be lexed after creating the operand, otherwise the StringRef is
moved before being copied and the debug output is incorrect.
Prefetch example:
$ echo "prfm pldl1keep, [x2]" | ./bin/llvm-mc \
-triple aarch64-none-linux-gnu -show-encoding -debug
Before:
Matching formal operand class MCK_Prefetch against actual operand at
index 1 (<prfop ,>): match success using generic matcher
After:
Matching formal operand class MCK_Prefetch against actual operand at
index 1 (<prfop pldl1keep>): match success using generic matcher
Reviewed By: david-arm
Differential Revision: https://reviews.llvm.org/D80620
Summary:
This patch adds support of using the result of an expression as an
immediate value. For example,
0:
.skip 4
1:
mov x0, 1b - 0b
is assembled to
mov x0, #4
Currently it does not support expressions requiring relocation unless
explicitly specified. This fixes PR#45781.
Reviewers: peter.smith, ostannard, efriedma
Reviewed By: efriedma
Subscribers: nickdesaulniers, llozano, manojgupta, efriedma, ostannard, kristof.beyls, hiraditya, danielkiss, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D80028
This patch upstreams support for the Armv8.6-a Matrix Multiplication
Extension. A summary of the features can be found here:
https://community.arm.com/developer/ip-products/processors/b/processors-ip-blog/posts/arm-architecture-developments-armv8-6-a
This patch includes:
- Assembly support for AArch64 Scalable Vector Instructions (in line
with the Scalable Vector Extension - SVE)
This is part of a patch series, starting with BFloat16 support and
the other components in the armv8.6a extension (in previous patches
linked in phabricator)
Based on work by:
- Luke Geeson
- Oliver Stannard
- Luke Cheeseman
Reviewers: t.p.northover, rengolin, c-rhodes
Reviewed By: c-rhodes
Subscribers: c-rhodes, ostannard, tschuett, kristof.beyls, hiraditya,
danielkiss, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77873
So that constant expressions like the following are permitted:
and w0, w0, #~(0xfe<<24)
and w1, w1, #~(0xff<<24)
The behavior matches GNU as (opcodes/aarch64-opc.c:aarch64_logical_immediate_p).
Reviewed By: sdesmalen
Differential Revision: https://reviews.llvm.org/D75885
Summary:
This patch introduces command-line support for the Armv8.6-a architecture and assembly support for BFloat16. Details can be found
https://community.arm.com/developer/ip-products/processors/b/processors-ip-blog/posts/arm-architecture-developments-armv8-6-a
in addition to the GCC patch for the 8..6-a CLI:
https://gcc.gnu.org/legacy-ml/gcc-patches/2019-11/msg02647.html
In detail this patch
- march options for armv8.6-a
- BFloat16 assembly
This is part of a patch series, starting with command-line and Bfloat16
assembly support. The subsequent patches will upstream intrinsics
support for BFloat16, followed by Matrix Multiplication and the
remaining Virtualization features of the armv8.6-a architecture.
Based on work by:
- labrinea
- MarkMurrayARM
- Luke Cheeseman
- Javed Asbar
- Mikhail Maltsev
- Luke Geeson
Reviewers: SjoerdMeijer, craig.topper, rjmccall, jfb, LukeGeeson
Reviewed By: SjoerdMeijer
Subscribers: stuij, kristof.beyls, hiraditya, dexonsmith, danielkiss, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D76062
