SME introduces the ZA array, a new piece of architectural register state
consisting of a matrix of [SVLb x SVLb] bytes, where SVL is the
implementation defined Streaming SVE vector length and SVLb is the
number of 8-bit elements in a vector of SVL bits.
SME instructions consist of three types of matrix operands:
* Tiles: a ZA tile is a square, two-dimensional sub-array of elements
within the ZA array. These tiles make up the larger accumulator array
and the granularity varies based on the element size, i.e.
- ZAQ0..ZAQ15 (smallest tile granule)
- ZAD0..ZAD7
- ZAS0..ZAS3
- ZAH0..ZAH1
or ZAB0 (largest tile granule, single tile)
* Tile vectors: similar to regular tiles, but have an extra 'h' or 'v'
to tell how the vector at [reg+offset] is layed out in the tile,
horizontally or vertically. E.g. za1h.h or za15v.q, which corresponds
to vectors in registers ZAH1 and ZAQ15, respectively.
* Accumulator matrix: this is the entire accumulator array ZA.
This patch adds the register classes and related operands and parsing
for SME instructions operating on the accumulator array.
The ADDHA and ADDVA instructions which operate on tiles are also added
in this patch to make some use of the code added, later patches will
make use of the other operands introduced here.
The reference can be found here:
https://developer.arm.com/documentation/ddi0602/2021-06
Co-authored by: Sander de Smalen (@sdesmalen)
Reviewed By: david-arm
Differential Revision: https://reviews.llvm.org/D105570
Continuing from D105763, this allows placing certain properties
about attributes in the TableGen definition. In particular, we
store whether an attribute applies to fn/param/ret (or a combination
thereof). This information is used by the Verifier, as well as the
ForceFunctionAttrs pass. I also plan to use this in LLParser,
which also duplicates info on which attributes are valid where.
This keeps metadata about attributes in one place, and makes it
more likely that it stays in sync, rather than in various
functions spread across the codebase.
Differential Revision: https://reviews.llvm.org/D105780
First patch in a series adding MC layer support for the Arm Scalable
Matrix Extension.
This patch adds the following features:
sme, sme-i64, sme-f64
The sme-i64 and sme-f64 flags are for the optional I16I64 and F64F64
features.
If a target supports I16I64 then the following instructions are
implemented:
* 64-bit integer ADDHA and ADDVA variants (D105570).
* SMOPA, SMOPS, SUMOPA, SUMOPS, UMOPA, UMOPS, USMOPA, and USMOPS
instructions that accumulate 16-bit integer outer products into 64-bit
integer tiles.
If a target supports F64F64 then the FMOPA and FMOPS instructions that
accumulate double-precision floating-point outer products into
double-precision tiles are implemented.
Outer products are implemented in D105571.
The reference can be found here:
https://developer.arm.com/documentation/ddi0602/2021-06
Reviewed By: CarolineConcatto
Differential Revision: https://reviews.llvm.org/D105569
This patch makes the operations on InstructionCost saturate, so that when
costs are accumulated they saturate to <max value>.
One of the compelling reasons for wanting to have saturation support
is because in various places, arbitrary values are used to represent
a 'high' cost, but when accumulating the cost of some set of operations
or a loop, overflow is not taken into account, which may lead to unexpected
results. By defining the operations to saturate, we can express the cost
of something 'very expensive' as InstructionCost::getMax().
Reviewed By: kparzysz, dmgreen
Differential Revision: https://reviews.llvm.org/D105108
Rules:
1. SCEVUnknown is a pointer if and only if the LLVM IR value is a
pointer.
2. SCEVPtrToInt is never a pointer.
3. If any other SCEV expression has no pointer operands, the result is
an integer.
4. If a SCEVAddExpr has exactly one pointer operand, the result is a
pointer.
5. If a SCEVAddRecExpr's first operand is a pointer, and it has no other
pointer operands, the result is a pointer.
6. If every operand of a SCEVMinMaxExpr is a pointer, the result is a
pointer.
7. Otherwise, the SCEV expression is invalid.
I'm not sure how useful rule 6 is in practice. If we exclude it, we can
guarantee that ScalarEvolution::getPointerBase always returns a
SCEVUnknown, which might be a helpful property. Anyway, I'll leave that
for a followup.
This is basically mop-up at this point; all the changes with significant
functional effects have landed. Some of the remaining changes could be
split off, but I don't see much point.
Differential Revision: https://reviews.llvm.org/D105510
C++23 will make these conversions ambiguous - so fix them to make the
codebase forward-compatible with C++23 (& a follow-up change I've made
will make this ambiguous/invalid even in <C++23 so we don't regress
this & it generally improves the code anyway)
SelectionDAG's equivalents in ISD::InputArg/OutputArg track the
original argument index. Mips relies on this, and its currently
reinventing its own parallel CallLowering infrastructure which tracks
these indexes on the side. Add this to help move towards deleting the
custom mips handling.
This adds a new llvm::thread class with the same interface as std::thread
except there is an extra constructor that allows us to set the new thread's
stack size. On Darwin even the default size is boosted to 8MB to match the main
thread.
It also switches all users of the older C-style `llvm_execute_on_thread` API
family over to `llvm::thread` followed by either a `detach` or `join` call and
removes the old API.
Moved definition of DefaultStackSize into the .cpp file to hopefully
fix the build on some (GCC-6?) machines.
This adds a new llvm::thread class with the same interface as std::thread
except there is an extra constructor that allows us to set the new thread's
stack size. On Darwin even the default size is boosted to 8MB to match the main
thread.
It also switches all users of the older C-style `llvm_execute_on_thread` API
family over to `llvm::thread` followed by either a `detach` or `join` call and
removes the old API.
These currently always require a type parameter. The bitcode reader
already upgrades old bitcode without the type parameter to use the
pointee type.
In cases where the caller does not have byval but the callee does, we
need to follow CallBase::paramHasAttr() and also look at the callee for
the byval type so that CallBase::isByValArgument() and
CallBase::getParamByValType() are in sync. Do the same for preallocated.
While we're here add a corresponding version for inalloca since we'll
need it soon.
Reviewed By: nikic
Differential Revision: https://reviews.llvm.org/D104663
The build system was linking the PluginsTests unittest against libLLVM.so
and LLVMAsmParser which was causing the test to fail with this error:
LLVM ERROR: inconsistency in registered CommandLine options
We need to add llvm libraries to LLVM_LINK_COMPONENTS so that
they are dropped from the linker arguments when linking with
LLVM_LINK_LLVM_DYLIB=ON
Reviewed By: aeubanks
Differential Revision: https://reviews.llvm.org/D105523
This change yields an additional 2% size reduction on an internal search
binary, and an additional 0.5% size reduction on fuchsia.
Differential Revision: https://reviews.llvm.org/D104751
Address mistakenly comparing the pointer values of two C-style strings
rather than comparing their contents in the unit tests for makeVisitor,
added in 6d6f35eb7b92c6dd4478834497752f4e963db16d
This patch adds intrinsic definitions and SDNodes for predicated
load/store/gather/scatter, based on the work done in D57504.
Reviewed By: simoll, craig.topper
Differential Revision: https://reviews.llvm.org/D99355
Adds support for both synchronous and asynchronous calls to wrapper functions
using SPS (Simple Packed Serialization). Also adds support for wrapping
functions on the JIT side in SPS-based wrappers that can be called from the
executor.
These new methods simplify calls between the JIT and Executor, and will be used
in upcoming ORC runtime patches to enable communication between ORC and the
runtime.
This enables proper lowering of non-byte sized loads. We still aren't
faithfully preserving memory types everywhere, so the legality checks
still only consider the size.
This will currently accept the old number of bytes syntax, and convert
it to a scalar. This should be removed in the near future (I think I
converted all of the tests already, but likely missed a few).
Not sure what the exact syntax and policy should be. We can continue
printing the number of bytes for non-generic instructions to avoid
test churn and only allow non-scalar types for generic instructions.
This will currently print the LLT in parentheses, but accept parsing
the existing integers and implicitly converting to scalar. The
parentheses are a bit ugly, but the parser logic seems unable to deal
without either parentheses or some keyword to indicate the start of a
type.
Dynamically loaded plugins for the new pass manager are initialised by
calling llvmGetPassPluginInfo. This is defined as a weak symbol so that
it is continually redefined by each plugin that is loaded. When loading
a plugin from a shared library, the intention is that
llvmGetPassPluginInfo will be resolved to the definition in the most
recent plugin. However, using a global search for this resolution can
fail in situations where multiple plugins are loaded.
Currently:
* If a plugin does not define llvmGetPassPluginInfo, then it will be
silently resolved to the previous plugin's definition.
* If loading the same plugin twice with another in between, e.g. plugin
A/plugin B/plugin A, then the second load of plugin A will resolve to
llvmGetPassPluginInfo in plugin B.
* The previous case can also occur when a dynamic library defines both
NPM and legacy plugins; the legacy plugins are loaded first and then
with `-fplugin=A -fpass-plugin=B -fpass-plugin=A`: A will be loaded as
a legacy plugin and define llvmGetPassPluginInfo; B will be loaded
and redefine it; and finally when A is loaded as an NPM plugin it will
be resolved to the definition from B.
Instead of searching globally, restrict the symbol lookup to the library
that is currently being loaded.
Differential Revision: https://reviews.llvm.org/D104916
Symbol tables can have symbols with no size in mach-o files that were failing to get combined into a single entry. This resulted in many duplicate entries for the same address and made gsym files larger.
Differential Revision: https://reviews.llvm.org/D105068
Relands patch reverted by 61242c0addb120294211d24a97ed89837418cb36
The original patch mistakenly included unrelated tests.
Adds a utility to combine multiple Callables into a single Callable.
This is useful to make constructing a visitor for `std::visit`-like
functions more natural; functions like this will be added in future
patches.
Intended to supercede https://reviews.llvm.org/D99560 by
perfectly-forwarding the combined Callables.
Reviewed By: dblaikie
Differential Revision: https://reviews.llvm.org/D100670
Adds a utility to combine multiple Callables into a single Callable.
This is useful to make constructing a visitor for `std::visit`-like
functions more natural; functions like this will be added in future
patches.
Intended to supercede https://reviews.llvm.org/D99560 by
perfectly-forwarding the combined Callables.
Reviewed By: dblaikie
Differential Revision: https://reviews.llvm.org/D100670
On AIX the alignment implementation has the storage aligned to the
preferred alignment instead of the alignment of a type. Macro guard
these tests for AIX and have them pass when the "reference alignment" is
less than or equal to the alignment observed. In other words, the
alignment applied is at least as strict as the required alignment.
Reviewed By: hubert.reinterpretcast
Differential Revision: https://reviews.llvm.org/D104786
This patch relands https://reviews.llvm.org/D104454, but fixes some failing
builds on Mac OS which apparently has a different definition for size_t,
that caused 'ambiguous operator overload' for the implicit conversion
of TypeSize to a scalar value.
This reverts commit b732e6c9a8438e5204ac96c8ca76f9b11abf98ff.
To reflect that the size may be scalable, a TypeSize is returned
instead of an unsigned. In places where the result is used,
it currently relies on an implicit cast of TypeSize -> uint64_t,
which asserts that the type is not scalable.
This patch is NFC for fixed-width vectors.
Reviewed By: aemerson
Differential Revision: https://reviews.llvm.org/D104454
This is a mechanical change. This actually also renames the
similarly named methods in the SmallString class, however these
methods don't seem to be used outside of the llvm subproject, so
this doesn't break building of the rest of the monorepo.
Rename functions with the `xx_lower()` names to `xx_insensitive()`.
This was requested during the review of D104218.
Test names and variables in llvm/unittests/ADT/StringRefTest.cpp
that refer to "lower" are renamed to "insensitive" correspondingly.
Unused function aliases with the former method names are left
in place (without any deprecation attributes) for transition purposes.
All references within the monorepo will be changed (with essentially
mechanical changes), and then the old names will be removed in a
later commit.
Also remove the superfluous method names at the start of doxygen
comments, for the methods that are touched here. (There are more
occurrances of this left in other methods though.) Also remove
duplicate doxygen comments from the implementation file.
Differential Revision: https://reviews.llvm.org/D104819
- Currently, the emitting of labels in the parsePrimaryExpr function is case independent. It just takes the identifier and emits it.
- However, for HLASM the emitting of labels is case independent. We are emitting them in the upper case only, to enforce case independency. So we need to ensure that at the time of parsing the label we are emitting the upper case (in `parseAsHLASMLabel`), but also, when we are processing a PC-relative relocatable expression, we need to ensure we emit it in upper case (in `parsePrimaryExpr`)
- To achieve this a new MCAsmInfo attribute has been introduced which corresponding targets can override if needed.
Reviewed By: abhina.sreeskantharajan, uweigand
Differential Revision: https://reviews.llvm.org/D104715
This also adds new interfaces for the fixed- and scalable case:
* LLT::fixed_vector
* LLT::scalable_vector
The strategy for migrating to the new interfaces was as follows:
* If the new LLT is a (modified) clone of another LLT, taking the
same number of elements, then use LLT::vector(OtherTy.getElementCount())
or if the number of elements is halfed/doubled, it uses .divideCoefficientBy(2)
or operator*. That is because there is no reason to specifically restrict
the types to 'fixed_vector'.
* If the algorithm works on the number of elements (as unsigned), then
just use fixed_vector. This will need to be fixed up in the future when
modifying the algorithm to also work for scalable vectors, and will need
then need additional tests to confirm the behaviour works the same for
scalable vectors.
* If the test used the '/*Scalable=*/true` flag of LLT::vector, then
this is replaced by LLT::scalable_vector.
Reviewed By: aemerson
Differential Revision: https://reviews.llvm.org/D104451
This attribute uses Attributor's internal 'optimistic' call graph
information to answer queries about function call reachability.
Functions can become reachable over time as new call edges are
discovered.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D104599
Summary:
The changes to globalization introduced in D97680 created two new functions to
push / pop shareably memory on the GPU, __kmpc_alloc_shared and
__kmpc_free_shared. This patch adds these new runtime functions to the
library info so they can be used by the HeapToStack attributor interface. This
optimization replaces malloc / free pairs with stack memory if legal.
Reviewed By: tianshilei1992
Differential Revision: https://reviews.llvm.org/D102087
These serve as a convenient combination of consume_front/back and
startswith_lower/endswith_lower, consistent with other existing
case insensitive methods named <operation>_lower.
Differential Revision: https://reviews.llvm.org/D104218
This patch aims to add the scalable property to LLT. The rest of the
patch-series changes the interfaces to take/return ElementCount and
TypeSize, which both have the ability to represent the scalable property.
The changes are mostly mechanical and aim to be non-functional changes
for fixed-width vectors.
For scalable vectors some unit tests have been added, but no effort has
been put into making any of the GlobalISel algorithms work with scalable
vectors yet. That will be left as future work.
The work is split into a series of 5 patches to make reviews easier.
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D104450
