Right now, the counters are added in regards of the number of successors
for a given BasicBlock: it's good when we've only 1 or 2 successors (at
least with BranchInstr). But in the case of a switch statement, the
BasicBlock after switch has several predecessors and we need know from
which BB we're coming from.
So the idea is to revert what we're doing: add a PHINode in each block
which will select the counter according to the incoming BB. They're
several pros for doing that:
- we fix the "switch" bug
- we remove the function call to "__llvm_gcov_indirect_counter_increment"
and the lookup table stuff
- we replace by PHINodes, so the optimizer will probably makes a better
job.
Patch by calixte!
Differential Revision: https://reviews.llvm.org/D51619
llvm-svn: 341977
Summary: Add function name when verification fails as an initial breadcrumb for debugging.
Patch by David Callahan.
Reviewers: mehdi_amini, modocache
Reviewed By: modocache
Subscribers: llvm-commits, modocache
Differential Revision: https://reviews.llvm.org/D51386
llvm-svn: 341974
In r337348, I changed lowering to prefer X86ISD::UNPCKL/UNPCKH opcodes over MOVLHPS/MOVHLPS for v2f64 {0,0} and {1,1} shuffles when we have SSE2. This enabled the removal of a bunch of weirdly bitcasted isel patterns in r337349. To avoid changing the tests I placed a gross hack in isel to still emit movhlps instructions for fake unary unpckh nodes. A similar hack was not needed for unpckl and movlhps because we do execution domain switching for those. But unpckh and movhlps have swapped operand order.
This patch removes the hack.
This is a code size increase since unpckhpd requires a 0x66 prefix and movhlps does not. But if that's a big concern we should be using movhlps for all unpckhpd opcodes and let commuteInstruction turnit into unpckhpd when its an advantage.
Differential Revision: https://reviews.llvm.org/D49499
llvm-svn: 341973
GNUX32 uses 32-bit pointers despite is64BitMode being true. So we should use EAX to return the value.
Fixes ones of the failures from PR38865.
Differential Revision: https://reviews.llvm.org/D51940
llvm-svn: 341972
For vectors, getPrimitiveSizeInBits returns the full vector width. This code should using the element size for vectors. This could be fixed by calling getScalarSizeInBits, but its even easier to just get it from the APInt we're checking.
Differential Revision: https://reviews.llvm.org/D51938
llvm-svn: 341971
There are 2 cases when we create PHI nodes:
* For the result of the call that was duplicated in the split blocks.
Those PHI nodes should have the debug location of the call.
* For values produced before the call. Those instructions need to be
duplicated in the split blocks and the PHI nodes should have the
debug locations of those instructions.
Fixes PR37962.
Reviewers: junbuml, gbedwell, vsk
Reviewed By: junbuml
Tags: #debug-info
Differential Revision: https://reviews.llvm.org/D51919
llvm-svn: 341970
An fp_to_sint node would be incorrectly lowered to a TruncIntFP node in
single-float mode. This would trigger an "Unexpected illegal type!"
assert.
Patch by Dan Ravensloft.
Differential revision: https://reviews.llvm.org/D51810
llvm-svn: 341952
Summary:
Place global arrays in comdat sections with their associated functions.
This makes sure they are stripped along with the functions they
reference, even on the BFD linker.
Reviewers: eugenis
Reviewed By: eugenis
Subscribers: eraman, hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D51902
llvm-svn: 341951
Fix for https://bugs.llvm.org/show_bug.cgi?id=38807, which occurred
while compiling SemaTemplateInstantiate.cpp with clang and GVNHoist
enabled. In the following example:
1=def(entry)
/ \
2=def(1) 4=def(1)
3=def(2) 5=def(4)
When removing the MemoryDef 2=def(1) from its basic block, and just
before adding it to the end of the parent basic block, we first
replace all its uses with the defining memory access:
3=def(2) -> 3=def(1)
Then we call insertDef for adding 2=def(1) to the parent basic block,
where we replace the uses of 1=def(entry) with 2=def(1). Doing so we
create a self reference:
2=def(1) -> 2=def(2) (bad)
3=def(1) -> 3=def(2) (ok)
4=def(1) -> 4=def(2) (ok)
Differential Revision: https://reviews.llvm.org/D51801
llvm-svn: 341947
Makes the produced pdbs more deterministic; before they'd contain 2 arbitary
bytes where this padding was.
Also reorder initialization to match the order of the fields in the struct (nfc)
llvm-svn: 341945
For some reason, llvm-objdump defaults to -arch=i386 on this system while
the test checks x86_64 output. Explicitly pass -arch=x86_64.
llvm-svn: 341944
Summary:
The undef and the infinite loop at the end cause this test to be translated
unpredictably. In particular, the checked-for `mpy` disappears under
certain legal optimizations (e.g. the one in D50222).
Since the use of these constructs is not relevant to the behavior tested,
according to the header comment, this change, suggested by @kparzysz,
eliminates them.
Was initially committed in r341046, but was reverted.
Patch by: hermord (Dmytro Shynkevych)!
Reviewers: kparzysz
Reviewed By: kparzysz
Subscribers: lebedev.ri, llvm-commits, kparzysz
Differential Revision: https://reviews.llvm.org/D50944
llvm-svn: 341943
Search from i64 reducing phis, as well as i32, to allow the
generation of smlald instructions.
Differential Revision: https://reviews.llvm.org/D51101
llvm-svn: 341941
This patch adds support for ORC JIT for mips/mips64 architecture.
In common code $static is changed to __ORCstatic because on MIPS
architecture "$" is a reserved character.
Patch by Luka Ercegovcevic
Differential Revision: https://reviews.llvm.org/D49665
llvm-svn: 341934
We've had the pass enabled downstream for a couple of weeks and it
seems to be okay, so enable it by default.
Differential Revision: https://reviews.llvm.org/D51920
llvm-svn: 341932
The presence of readnone and an access range attribute (argmemonly,
inaccessiblememonly, inaccessiblemem_or_argmemonly) is considered an
error by the verifier. This seems strict but also not wrong. This
patch makes sure function attribute detection will remove all access
range attributes for readnone functions.
llvm-svn: 341927
The previous implementation traversed all loop blocks and bailed if one
was not a latch block. Since we are only interested in latch blocks, we
should only traverse those.
llvm-svn: 341926
MIPS ISAs start to support third operand for the `rdhwr` instruction
starting from Revision 6. But LLVM generates assembler code with
three-operands version of this instruction on any MIPS64 ISA. The third
operand is always zero, so in case of direct code generation we get
correct code.
This patch fixes the bug by adding an instruction alias. The same alias
already exists for 32-bit ISA.
Ideally, we also need to reject three-operands version of the `rdhwr`
instruction in an assembler code if ISA revision is less than 6. That is
a task for a separate patch.
This fixes PR38861 (https://bugs.llvm.org/show_bug.cgi?id=38861)
Differential revision: https://reviews.llvm.org/D51773
llvm-svn: 341919
MOVMSKPS and MOVMSKPD both take FP types, but likely the operations before it are on integer types with just a int->fp bitcast between them. If the bitcast isn't used by anything else and doesn't change the element width we can look through it to simplify the integer ops.
llvm-svn: 341915
These are test cases inspired by sequences like below for extracting the same bit from every vector element and checking for all zeros/ones.
define i1 @and256_x8(<8 x i32>) {
%a = trunc <8 x i32> %0 to <8 x i1>
%b = bitcast <8 x i1> %a to i8
%d = icmp eq i8 %b, -1
ret i1 %d
}
This is what the above looks like after InstCombine.
define i1 @and256_x8_opt(<8 x i32>) {
%2 = and <8 x i32> %0, <i32 1, i32 1, i32 1, i32 1, i32 1, i32 1, i32 1, i32 1>
%a = icmp ne <8 x i32> %2, zeroinitializer
%b = bitcast <8 x i1> %a to i8
%d = icmp eq i8 %b, -1
ret i1 %d
}
llvm-svn: 341908
Summary:
In this change, we overhaul the implementation for loading
`llvm::xray::Trace` objects from files by using the combination of
specific FDR Record types and visitors breaking up the logic to
reconstitute an execution trace from flight-data recorder mode traces.
This change allows us to handle out-of-temporal order blocks as written
in files, and more consistently recreate an execution trace spanning
multiple blocks and threads. To do this, we use the `WallclockRecord`
associated with each block to maintain temporal order of blocks, before
attempting to recreate an execution trace.
The new addition in this change is the `TraceExpander` type which can be
thought of as a decompression/decoding routine. This allows us to
maintain the state of an execution environment (thread+process) and
create `XRayRecord` instances that fit nicely into the `Trace`
container. We don't have a specific unit test for the TraceExpander
type, since the end-to-end tests for the `llvm-xray convert` tools
already cover precisely this codepath.
This change completes the refactoring started with D50441.
Depends on D51911.
Reviewers: mboerger, eizan
Subscribers: mgorny, hiraditya, mgrang, llvm-commits
Differential Revision: https://reviews.llvm.org/D51912
llvm-svn: 341906
Summary:
This more correctly reflects the data written by the FDR mode runtime.
This is a continuation of the work in D50441.
Reviewers: mboerger, eizan
Subscribers: hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D51911
llvm-svn: 341905
This use is sketchy because it basically reinterprets a pointer to another pointer, but right now it's hiding in a union. After this change it'll be easy to grep for bit_cast of a pointer and un-sketch things if we want. This patch therefore obeys the law of conservation of sketch, with minor improvement.
llvm-svn: 341900
The was previously committed as r341749 then reverted as r341750 because
bit_cast needed to do its own thing to check is_trivially_copyable on GCC 4.x.
This is now done and std;:array should now get accepted.
llvm-svn: 341897
Currently we re-use cached info from sub loops or traverse them
to populate AliasSetTracker. But after that we traverse all basic blocks
from the current loop. This is redundant work.
All what we need is traversing the all basic blocks from the loop except
those which are used to get the data from the cache.
This should improve compile time only.
Reviewers: mkazantsev, reames, kariddi, anna
Reviewed By: reames
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D51715
llvm-svn: 341896
We should never abort on valid IR. The most reasonable
interpretation of an arbitrary address space pointer is
probably some kind of special subset of global memory.
llvm-svn: 341894
IndVarSimplify's design is somewhat odd in the way how it reports that
some transform has made a change. It has a `Changed` field which can
be set from within any function, which makes it hard to track whether or
not it was set properly after a transform was made. It leads to oversights
in setting this flag where needed, see example in PR38855.
This patch removes the `Changed` field, turns it into a local and unifies
the signatures of all relevant transform functions to return boolean value
which designates whether or not this transform has made a change.
Differential Revision: https://reviews.llvm.org/D51850
Reviewed By: skatkov
llvm-svn: 341893
I'd made exactly this same change before, but it appears to have been accidentally reverted in another change. (I'm assuming accidental since it was without comment or test case, and in an unrelated change.)
llvm-svn: 341892
With the merge of TUs and CUs into a single container, some code that
relied on the CU range having an ordered range of contiguous addresses
(for locating a CU at a given offset) broke. But the units from
debug_info (currently only CUs, but CUs and TUs in DWARFv5) are in a
contiguous sub-range of that container - searching only through that
subrange is still valid & so do that.
llvm-svn: 341889