We already allowed keep+discard. It is important to be able to discard
a temporary if a rename fail. It is also convenient as it allows the
use of RAII for discarding.
Allow discarding twice for similar reasons.
llvm-svn: 318867
The default limit is 1000000 but it can be configured with a cache
policy. The motivation is that some filesystems (notably ext4) have
a limit on the number of files that can be contained in a directory
(separate from the inode limit).
Differential Revision: https://reviews.llvm.org/D40327
llvm-svn: 318857
The CodeGenCoverage.h header is installed, but it references
the build-only header "llvm/Config/config.h". This breaks use
of the CodeGenCoverage.h header once it is installed, because config.h isn't
available.
This patch fixes the error by moving the config.h include from
the CodeGenCoverage.h header (where it's not needed), to the
CodeGenCoverage.cpp source file.
llvm-svn: 318602
This move some of the complexity over to the lower level TempFile.
It also makes it a bit more explicit where errors are ignored since we
now have a call to consumeError.
llvm-svn: 318550
Fixed broken comparison.
borked by: rL284966 (see: https://reviews.llvm.org/D25730).
Differential Revision: https://reviews.llvm.org/D40119
This is a second attempt to commit this.
The first attempt broke lld and gold tests that had been written against
the incorrect behaivour.
llvm-svn: 318524
It turns out this #include isn't used from Host.h anyway,
but by having it it causes circular include dependencies.
This issues only surfaced while I was working on a separate
patch, so I'm submitting this first so that it's independent
of the other, unrelated patch.
llvm-svn: 318489
Removes AllocateRWX, setWritable and setExecutable from sys::Memory and
standardizes on allocateMappedMemory / protectMappedMemory. The
allocateMappedMemory method is updated to request full permissions for memory
blocks so that they can be marked executable later.
llvm-svn: 318464
Summary:
This change fixes a bug where `obj2yaml` can in some cases produce YAML that
causes `yaml2obj` to error.
The ELF YAML document structure has a `Sections` mapping, which contains three
mappings, all of which are optional: `Local`, `Global`, and `Weak.` Any one of
these can be missing, but if all three are missing, then `yaml2obj` errors. This
change allows YAML input for cases like this one.
I have tested this with check-llvm and check-lld, and all tests passed.
This change is the result of test failures while working on D39582, which
introduces a `DynamicSymbols` mapping, which will be empty at times.
Reviewers: compnerd, jakehehrlich, silvas, kledzik, mehdi_amini, pcc
Reviewed By: compnerd
Subscribers: silvas, llvm-commits
Differential Revision: https://reviews.llvm.org/D39908
llvm-svn: 318428
Summary:
This patch adds a LLVM_ENABLE_GISEL_COV which, like LLVM_ENABLE_DAGISEL_COV,
causes TableGen to instrument the generated table to collect rule coverage
information. However, LLVM_ENABLE_GISEL_COV goes a bit further than
LLVM_ENABLE_DAGISEL_COV. The information is written to files
(${CMAKE_BINARY_DIR}/gisel-coverage-* by default). These files can then be
concatenated into ${LLVM_GISEL_COV_PREFIX}-all after which TableGen will
read this information and use it to emit warnings about untested rules.
This technique could also be used by SelectionDAG and can be further
extended to detect hot rules and give them priority over colder rules.
Usage:
* Enable LLVM_ENABLE_GISEL_COV in CMake
* Build the compiler and run some tests
* cat gisel-coverage-[0-9]* > gisel-coverage-all
* Delete lib/Target/*/*GenGlobalISel.inc*
* Build the compiler
Known issues:
* ${LLVM_GISEL_COV_PREFIX}-all must be generated as a manual
step due to a lack of a portable 'cat' command. It should be the
concatenation of all ${LLVM_GISEL_COV_PREFIX}-[0-9]* files.
* There's no mechanism to discard coverage information when the ruleset
changes
Depends on D39742
Reviewers: ab, qcolombet, t.p.northover, aditya_nandakumar, rovka
Reviewed By: rovka
Subscribers: vsk, arsenm, nhaehnle, mgorny, kristof.beyls, javed.absar, igorb, llvm-commits
Differential Revision: https://reviews.llvm.org/D39747
llvm-svn: 318356
Summary:
Make it possible to feed runtime information back to tablegen to enable
profile-guided tablegen-eration, detection of untested tablegen definitions, etc.
Being a cross-compiler by nature, LLVM will potentially collect data for multiple
architectures (e.g. when running 'ninja check'). We therefore need a way for
TableGen to figure out what data applies to the backend it is generating at the
time. This patch achieves that by including the name of the 'def X : Target ...'
for the backend in the TargetRegistry.
Reviewers: qcolombet
Reviewed By: qcolombet
Subscribers: jholewinski, arsenm, jyknight, aditya_nandakumar, sdardis, nemanjai, ab, nhaehnle, t.p.northover, javed.absar, qcolombet, llvm-commits, fedor.sergeev
Differential Revision: https://reviews.llvm.org/D39742
llvm-svn: 318352
This requires a small change to TempFile: allowing a discard after a
failed keep.
With this the cache now handles signals and reuses a fd instead of
reopening the file.
llvm-svn: 318322
std::error_code can represent success, so we don't need a
Optional<std::error_code>.
Rename the variable to avoid confusion with the type Error.
llvm-svn: 318111
This just adds a TempFile class and replaces the use in
FileOutputBuffer with it.
The only difference for now is better error handling. Followup work includes:
- Convert other user of temporary files to it.
- Add support for automatically deleting on windows.
- Add a createUnnamed method that returns a potentially unnamed
file. It would be actually unnamed on modern linux and have a
unknown name on windows.
llvm-svn: 318069
Summary:
I want to leverage this to clean up some of the code in clang. This will allow us to simplify D39521 which was trying to do some of the same.
If we accurately keep the code in Host.cpp synced with new CPUs added to compile-rt/libgcc we should be able to use this file as a proxy for what's implemented in the libraries.
The entries for the CPUs recognized by the libraries use separate macros that define additional parameters like the name for __builtin_cpu_is and an alias string for the couple cases where __builtin_cpu_is accepts two different names.
All of the macros contain an ARCHNAME that is usually the same as the __builtin_cpu_is string, but sometimes isn't. This represents the name recognized by X86.td and -march.
I'm following the precedent set by ARM and AArch64 and adding this information to lib/Support/TargetParser.cpp
Reviewers: erichkeane, echristo, asbirlea
Reviewed By: echristo
Subscribers: llvm-commits, aemerson, kristof.beyls
Differential Revision: https://reviews.llvm.org/D39782
llvm-svn: 317900
Summary:
zturner suggested that mapped_file_region::init() on Windows seems to
create mappings that are larger than they need to be: Offset+Size
instead of Size. Indeed, that appears to be the case. I confirmed that
tests pass with mappings of just Size bytes, and fail with Size-1
bytes, suggesting that Size is indeed the correct value.
Reviewers: amccarth, zturner
Reviewed By: zturner
Subscribers: hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D39876
llvm-svn: 317850
Whenever LLVM_ENABLE_ABI_BREAKING_CHECKS is enabled, which
is usually the case for example when asserts are enabled,
Error's destructor does some additional checking to make sure
that that it does not represent an error condition and that it
was checked.
However, this is -- by definition -- not the likely codepath.
Some profiling shows that at least with some compilers, simply
calling assertIsChecked -- in a release build with full
optimizations -- can account for up to 15% of the entire
runtime of the program, even though this function should almost
literally be a no-op.
The problem is that the assertIsChecked function can be considered
too big to inline depending on the compiler's inliner. Since it's
unlikely to ever need to failure path though, we can move it out
of line and force it to not be inlined, so that the fast path
can be inlined.
In my test (using lld to link clang with CMAKE_BUILD_TYPE=Release
and LLVM_ENABLE_ASSERTIONS=ON), this reduces link time from 27
seconds to 23.5 seconds, which is a solid 15% gain.
llvm-svn: 317824
InMemoryBuffer and OnDiskBuffer classes have both factory methods and
public constructors, and that looks a bit odd. This patch makes factory
methods non-member function to fix it.
Differential Revision: https://reviews.llvm.org/D39693
llvm-svn: 317739
Summary:
Extends SCL functionality to allow users to find the line number in the file the SCL is built from through SpecialCaseList::inSectionBlame(...).
Also removes the need to compile the SCL before use. As the matcher now contains a list of regexes to test against instead of a single regex, the regexes can be individually built on each insertion rather than one large compilation at the end of construction.
This change also fixes a bug where blank lines would cause the parser to become out-of-sync with the line number. An error on line `k` was being reported as being on line `k - num_blank_lines_before_k`.
Note: This change has a cyclical dependency on D39486. Both these changes must be submitted at the same time to avoid a build breakage.
Reviewers: vlad.tsyrklevich
Reviewed By: vlad.tsyrklevich
Subscribers: kcc, pcc, llvm-commits
Differential Revision: https://reviews.llvm.org/D39485
llvm-svn: 317617
This changes the interface of how targets describe how to legalize, see
the below description.
1. Interface for targets to describe how to legalize.
In GlobalISel, the API in the LegalizerInfo class is the main interface
for targets to specify which types are legal for which operations, and
what to do to turn illegal type/operation combinations into legal ones.
For each operation the type sizes that can be legalized without having
to change the size of the type are specified with a call to setAction.
This isn't different to how GlobalISel worked before. For example, for a
target that supports 32 and 64 bit adds natively:
for (auto Ty : {s32, s64})
setAction({G_ADD, 0, s32}, Legal);
or for a target that needs a library call for a 32 bit division:
setAction({G_SDIV, s32}, Libcall);
The main conceptual change to the LegalizerInfo API, is in specifying
how to legalize the type sizes for which a change of size is needed. For
example, in the above example, how to specify how all types from i1 to
i8388607 (apart from s32 and s64 which are legal) need to be legalized
and expressed in terms of operations on the available legal sizes
(again, i32 and i64 in this case). Before, the implementation only
allowed specifying power-of-2-sized types (e.g. setAction({G_ADD, 0,
s128}, NarrowScalar). A worse limitation was that if you'd wanted to
specify how to legalize all the sized types as allowed by the LLVM-IR
LangRef, i1 to i8388607, you'd have to call setAction 8388607-3 times
and probably would need a lot of memory to store all of these
specifications.
Instead, the legalization actions that need to change the size of the
type are specified now using a "SizeChangeStrategy". For example:
setLegalizeScalarToDifferentSizeStrategy(
G_ADD, 0, widenToLargerAndNarrowToLargest);
This example indicates that for type sizes for which there is a larger
size that can be legalized towards, do it by Widening the size.
For example, G_ADD on s17 will be legalized by first doing WidenScalar
to make it s32, after which it's legal.
The "NarrowToLargest" indicates what to do if there is no larger size
that can be legalized towards. E.g. G_ADD on s92 will be legalized by
doing NarrowScalar to s64.
Another example, taken from the ARM backend is:
for (unsigned Op : {G_SDIV, G_UDIV}) {
setLegalizeScalarToDifferentSizeStrategy(Op, 0,
widenToLargerTypesUnsupportedOtherwise);
if (ST.hasDivideInARMMode())
setAction({Op, s32}, Legal);
else
setAction({Op, s32}, Libcall);
}
For this example, G_SDIV on s8, on a target without a divide
instruction, would be legalized by first doing action (WidenScalar,
s32), followed by (Libcall, s32).
The same principle is also followed for when the number of vector lanes
on vector data types need to be changed, e.g.:
setAction({G_ADD, LLT::vector(8, 8)}, LegalizerInfo::Legal);
setAction({G_ADD, LLT::vector(16, 8)}, LegalizerInfo::Legal);
setAction({G_ADD, LLT::vector(4, 16)}, LegalizerInfo::Legal);
setAction({G_ADD, LLT::vector(8, 16)}, LegalizerInfo::Legal);
setAction({G_ADD, LLT::vector(2, 32)}, LegalizerInfo::Legal);
setAction({G_ADD, LLT::vector(4, 32)}, LegalizerInfo::Legal);
setLegalizeVectorElementToDifferentSizeStrategy(
G_ADD, 0, widenToLargerTypesUnsupportedOtherwise);
As currently implemented here, vector types are legalized by first
making the vector element size legal, followed by then making the number
of lanes legal. The strategy to follow in the first step is set by a
call to setLegalizeVectorElementToDifferentSizeStrategy, see example
above. The strategy followed in the second step
"moreToWiderTypesAndLessToWidest" (see code for its definition),
indicating that vectors are widened to more elements so they map to
natively supported vector widths, or when there isn't a legal wider
vector, split the vector to map it to the widest vector supported.
Therefore, for the above specification, some example legalizations are:
* getAction({G_ADD, LLT::vector(3, 3)})
returns {WidenScalar, LLT::vector(3, 8)}
* getAction({G_ADD, LLT::vector(3, 8)})
then returns {MoreElements, LLT::vector(8, 8)}
* getAction({G_ADD, LLT::vector(20, 8)})
returns {FewerElements, LLT::vector(16, 8)}
2. Key implementation aspects.
How to legalize a specific (operation, type index, size) tuple is
represented by mapping intervals of integers representing a range of
size types to an action to take, e.g.:
setScalarAction({G_ADD, LLT:scalar(1)},
{{1, WidenScalar}, // bit sizes [ 1, 31[
{32, Legal}, // bit sizes [32, 33[
{33, WidenScalar}, // bit sizes [33, 64[
{64, Legal}, // bit sizes [64, 65[
{65, NarrowScalar} // bit sizes [65, +inf[
});
Please note that most of the code to do the actual lowering of
non-power-of-2 sized types is currently missing, this is just trying to
make it possible for targets to specify what is legal, and how non-legal
types should be legalized. Probably quite a bit of further work is
needed in the actual legalizing and the other passes in GlobalISel to
support non-power-of-2 sized types.
I hope the documentation in LegalizerInfo.h and the examples provided in the
various {Target}LegalizerInfo.cpp and LegalizerInfoTest.cpp explains well
enough how this is meant to be used.
This drops the need for LLT::{half,double}...Size().
Differential Revision: https://reviews.llvm.org/D30529
llvm-svn: 317560
According to the docs on opegroup.org, the function can return
EINVAL if:
The len argument is less than zero, or the offset argument is less
than zero, or the underlying file system does not support this
operation.
I'd say it's a peculiar choice (when EONOTSUPP is right there), but
let's keep POSIX happy for now. This was independently discovered
by Mark Millard (on FreeBSD/ZFS).
Quickly ack'ed by Rui on IRC.
llvm-svn: 317535
rL316419 exposed a platform specific issue where the type of the values
passed to llvm::format could be different to the format string.
Debian unstable for mips uses long long int for std::chrono:duration,
while x86_64 uses long int.
For mips, this resulted in the value being corrupted when rendered to a
string. Address this by explicitly casting the result of the duration_cast
to the type specified in the format string.
Reviewers: sammccall
Differential Revision: https://reviews.llvm.org/D39597
llvm-svn: 317523
This removes the athlon type and simplifies the string decoding. We only really need these type/subtype breaks where we need to match libgcc/compiler-rt and these CPUs aren't part of that.
I'm looking into moving some of this information to a .def file to share with clang's __builtin_cpu_is handling. And while these CPUs aren't part of that the less lines I have to deal with in the .def file the better.
llvm-svn: 317354
'x86-64' has started to reflect a sort of generic tuning flag for more modern 64-bit CPUs. We probably shouldn't be using it as the name of an unidentifiable pentium4. So use nocona for all 64-bit pentium4s instead.
llvm-svn: 317230
We know that's the earliest CPU with 64-bit support. x86-64 has taken on a role of representing a more modern 64-bit CPU so we probably shouldn't be using that when we can't identify things.
llvm-svn: 317229
