Turn the assert in PrepareConstants into a conditon so that we can
handle mul instructions with negative immediates.
Differential Revision: https://reviews.llvm.org/D54094
llvm-svn: 346126
r345840 slightly changed the way promotion happens which could
result in zext and truncs having the same source and destination
types. This fixes that issue.
We can now also remove the zext and trunc in the following case:
(zext (trunc (promoted op)), i32)
This means that we can no longer treat a value, that is only used by
a sink, to be safe to promote.
I've also added in some extra asserts and replaced a cast for a
dyn_cast.
Differential Revision: https://reviews.llvm.org/D54032
llvm-svn: 346125
The original code avoided creating a zero vector after type legalization, but if we're after type legalization the type we have is legal. The real hazard we need to avoid is creating a build vector after op legalization. tryFoldToZero takes care of checking for this.
llvm-svn: 346119
This patch fixes a bug in the AVR FRMIDX expansion logic.
The expansion would leave a leftover operand from the original FRMIDX,
but now attached to a MOVWRdRr instruction. The MOVWRdRr instruction
did not expect this operand and so LLVM rejected the machine
instruction.
This would trigger an assertion:
Assertion failed: ((isImpReg || Op.isRegMask() || MCID->isVariadic() ||
OpNo < MCID->getNumOperands() || isMetaDataOp) &&
"Trying to add an operand to a machine instr that is already done!"),
function addOperand, file llvm/lib/CodeGen/MachineInstr.cpp
Tim fixed this so that now the FRMIDX is expanded correctly into
a well-formed MOVWRdRr.
Patch by Tim Neumann
llvm-svn: 346117
v2i8/v2i16/v2i32 are promoted to v2i64. pmuludq takes a v2i64 input and produces a v2i64 output. Since we don't about the upper bits of the type legalized multiply we can use the pmuludq to produce the multiply result for the bits we do care about.
llvm-svn: 346115
This is an AVR-specific workaround for a limitation of the register
allocator that only exposes itself on targets with high register
contention like AVR, which only has three pointer registers.
The three pointer registers are X, Y, and Z.
In most nontrivial functions, Y is reserved for the frame pointer,
as per the calling convention. This leaves X and Z. Some instructions,
such as LPM ("load program memory"), are only defined for the Z
register. Sometimes this just leaves X.
When the backend generates a LDDWRdPtrQ instruction with Z as the
destination pointer, it usually trips up the register allocator
with this error message:
LLVM ERROR: ran out of registers during register allocation
This patch is a hacky workaround. We ban the LDDWRdPtrQ instruction
from ever using the Z register as an operand. This gives the
register allocator a bit more space to allocate, fixing the
regalloc exhaustion error.
Here is a description from the patch author Peter Nimmervoll
As far as I understand the problem occurs when LDDWRdPtrQ uses
the ptrdispregs register class as target register. This should work, but
the allocator can't deal with this for some reason. So from my testing,
it seams like (and I might be totally wrong on this) the allocator reserves
the Z register for the ICALL instruction and then the register class
ptrdispregs only has 1 register left and we can't use Y for source and
destination. Removing the Z register from DREGS fixes the problem but
removing Y register does not.
More information about the bug can be found on the avr-rust issue
tracker at https://github.com/avr-rust/rust/issues/37.
A bug has raised to track the removal of this workaround and a proper
fix; PR39553 at https://bugs.llvm.org/show_bug.cgi?id=39553.
Patch by Peter Nimmervoll
llvm-svn: 346114
Using TargetTransformInfo allows the splitting pass to factor in the
code size cost of instructions as it decides whether or not outlining is
profitable.
This did not regress the overall amount of outlining seen on the handful
of internal frameworks I tested.
Thanks to Jun Bum Lim for suggesting this!
Differential Revision: https://reviews.llvm.org/D53835
llvm-svn: 346108
Summary: This also enables some constant folding from KnownBits propagation. This helps on some cases vXi64 case in 32-bit mode where constant vectors appear as vXi32 and a bitcast. This can prevent getNode from constant folding sra/shl/srl.
Reviewers: RKSimon, spatel
Reviewed By: spatel
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D54069
llvm-svn: 346102
In PR39475:
https://bugs.llvm.org/show_bug.cgi?id=39475
..we may fail to recognize/simplify fabs() in some cases because we do not
canonicalize fcmp with a -0.0 operand.
Adding that canonicalization can cause regressions on min/max FP tests, so
that's this patch: for the purpose of determining whether something is min/max,
let the value returned by the select determine how we treat a 0.0 operand in the fcmp.
This patch doesn't actually change the -0.0 to +0.0. It just changes the analysis, so
we don't fail to recognize equivalent min/max patterns that only differ in the
signbit of 0.0.
Differential Revision: https://reviews.llvm.org/D54001
llvm-svn: 346097
These methods were just wrappers around getNode with additional asserts (identical and repeated 3 times). But getNode already has a switch that can be used to hold these asserts that allows them to be shared for all 3 opcodes. This also enables checking on the places that create these nodes without using the wrappers.
The rest of the patch is just changing all callers to use getNode directly.
llvm-svn: 346087
This patch gives the IR ComputeNumSignBits the same functionality as the
DAG version (the code is derived from the existing code).
This an extension of the single input shuffle analysis added with D53659.
Differential Revision: https://reviews.llvm.org/D53987
llvm-svn: 346071
Use MachineFrameInfo's OffsetAdjustment field to pass this information
from the target to CodeViewDebug.cpp. The X86 backend doesn't use it for
any other purpose.
This fixes PR38857 in the case where there is a non-aligned quantity of
CSRs and a non-aligned quantity of locals.
llvm-svn: 346062
Adding functionality to the DWARF verifier for DWARF v5 strx* forms which
index into the string offsets table.
Differential Revision: https://reviews.llvm.org/D54049
llvm-svn: 346061
ModuleSummaryIndex::exportToDot crashes when linking the Linux kernel
under ThinLTO using LLVMgold.so. This is due to the exportToDot
function trying to get the GUID of an empty ValueInfo. The root cause
related to the fact that we attempt to get the GUID of an aliasee
via its OriginalGUID recorded in the aliasee summary, and that is not
always possible. Specifically, we cannot do this mapping when the value
is internal linkage and there were other internal linkage symbols with
the same name.
There are 2 fixes for the problem included here.
1) In all cases where we can currently print the dot file from the
command line (which is only via save-temps), we have a valid AliaseeGUID
in the AliasSummary. Use that when it is available, so that we can get
the correct aliasee GUID whenever possible.
2) However, if we were to invoke exportToDot from the debugger right
after it is built during the initial analysis step (i.e. the per-module
summary), we won't have the AliaseeGUID field populated. In that case,
we have a fallback fix that will simply print "@"+GUID when we aren't
able to get the GUID from the OriginalGUID. It simply checks if the VI
is valid or not before attempting to get the name. Additionally, since
getAliaseeGUID will assert that the AliaseeGUID is non-zero, guard the
earlier fix#1 by a new function hasAliaseeGUID().
Reviewers: pcc, tmroeder
Subscribers: evgeny777, mehdi_amini, inglorion, dexonsmith, arphaman, llvm-commits
Differential Revision: https://reviews.llvm.org/D53986
llvm-svn: 346055
The majority of the changes are because the rest of shuffle lowering/combining prefers to replace the undef input with the other operand. Using UNPCKL directly seemed to avoid this and just grabbed a randomish register for the undef which can create false dependencies.
llvm-svn: 346050
Summary:
The assembler was able to assemble and then dump back to .s, but
was failing to parse certain directives necessary for valid .o
output:
- .type directives are now recognized to distinguish function symbols
and others.
- .size is now parsed to provide function size.
- .globaltype (introduced in https://reviews.llvm.org/D54012) is now
recognized to ensure symbols like __stack_pointer have a proper type
set for both .s and .o output.
Also added tests for the above.
Reviewers: sbc100, dschuff
Subscribers: jgravelle-google, aheejin, dexonsmith, kristina, llvm-commits, sunfish
Differential Revision: https://reviews.llvm.org/D53842
llvm-svn: 346047
We already have custom lowering for the AVX case in LegalizeVectorOps. So its better to keep the regular extend op around as long as possible.
I had to qualify one place in DAG combine that created illegal vector extending load operations. This change by itself had no effect on any tests which is why its included here.
I've made a few cleanups to the custom lowering. The sign extend code no longer creates an identity shuffle with undef elements. The zero extend code now emits a zero_extend_vector_inreg instead of an unpckl with a zero vector.
For the high half of the custom lowering of zero_extend/any_extend, we're now using an unpckh with a zero vector or undef. Previously we used used a pshufd to move the upper 64-bits to the lower 64-bits and then used a zero_extend_vector_inreg. I think the zero vector should require less execution resources and be smaller code size.
Differential Revision: https://reviews.llvm.org/D54024
llvm-svn: 346043
Use getImageBase() helper to compute the image base. Fix various
offsets/addresses/masks so they're actually correct.
This allows decoding unwind info from DLLs, and unwind info from object
files containing multiple functions.
Differential Revision: https://reviews.llvm.org/D54015
llvm-svn: 346036
A number of intrinsics, such as llvm.sin.f32, would result in a failure to
select. This patch adds expansions for the relevant selection DAG nodes, as
well as exhaustive testing for all f32 and f64 intrinsics.
The codegen for FMA remains a TODO item, pending support for the various
RISC-V FMA instruction variants.
The llvm.minimum.f32.* and llvm.maximum.* tests are commented-out, pending
upstream support for target-independent expansion, as discussed in
http://lists.llvm.org/pipermail/llvm-dev/2018-November/127408.html.
Differential Revision: https://reviews.llvm.org/D54034
Patch by Luís Marques.
llvm-svn: 346034
This is necessary as I'm wanting to remove the 'Constant Pool' shuffle decoding from getTargetShuffleMask - but using getTargetShuffleMaskIndices allows the shuffle combiner to realize that these calls are really broadcasts.....
As with a lot of the X86ISD::VPERMV3 code this causes some vperm2i/vperm2t shuffles to flip depending on optimal commutation.
llvm-svn: 346032
Summary:
This changes int types to unsigned int in a few places: function indices
and `wasm::Valtype` (which is unsigend int enum). Currently these
values cannot have negative values anyway, so this should not be a
functional change for now.
Reviewers: sbc100
Subscribers: dschuff, jgravelle-google, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D54044
llvm-svn: 346031
Summary:
EH stack depth is incremented at `try` and decremented at `catch`. When
there are more than two catch instructions for a try instruction, we
shouldn't count non-first catches when calculating EH stack depths.
This patch fixes two bugs:
- CFGStackify: Exclude `catch_all` in the terminate catch pad when
calculating EH pad stack, because when we have multiple catches for a
try we should count only the first catch instruction when calculating
EH pad stack.
- InstPrinter: The initial intention was also to exclude non-first
catches, but it didn't account nested try-catches, so it failed on
this case:
```
try
try
catch
end
catch <-- (1)
end
```
In the example, when we are at the catch (1), the last seen EH
instruction is not `try` but `end_try`, violating the wrong assumption.
We don't need these after we switch to the second proposal because there
is gonna be only one `catch` instruction. But anyway before then these
bugfixes are necessary for keep trunk in working state.
Reviewers: dschuff
Subscribers: sbc100, jgravelle-google, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D53819
llvm-svn: 346029
Summary:
-mldst-motion creates a new phi node without any debug info. Use the merged debug location from the incoming stores to fix this.
Fixes PR38177. The test case here is (somewhat) simplified from:
```
struct S {
int foo;
void fn(int bar);
};
void S::fn(int bar) {
if (bar)
foo = 1;
else
foo = 0;
}
```
Reviewers: dblaikie, gbedwell, aprantl, vsk
Reviewed By: vsk
Subscribers: vsk, JDevlieghere, llvm-commits
Tags: #debug-info
Differential Revision: https://reviews.llvm.org/D54019
llvm-svn: 346027
Running "llvm-pdbutil dump -all" on linux (using the native PDB reader),
over a few PDBs pulled from the Microsoft public symbol store uncovered
a few small issues:
- stripped PDBs might not have the strings stream (/names)
- stripped PDBs might not have the "module info" stream
Differential Revision: https://reviews.llvm.org/D54006
llvm-svn: 346010
Let i8/i16 uint/sint to fp conversions cost 1 if operand is a load.
Since the load already does the extension, there is no extra cost (previously
returned 2).
Review: Ulrich Weigand
https://reviews.llvm.org/D54028
llvm-svn: 346009
A year or so ago, I re-wrote most of the lit infrastructure in LLVM so
that it wasn't so boilerplate-y. I added lots of common helper type
stuff, simplifed usage patterns, and made the code more elegant and
maintainable.
We migrated to this in LLVM, clang, and lld's lit files, but not in
LLDBs. This started to bite me recently, as the 4 most recent times I
tried to run the lit test suite in LLDB on a fresh checkout the first
thing that would happen is that python would just start crashing with
unhelpful backtraces and I would have to spend time investigating.
You can reproduce this today by doing a fresh cmake generation, doing
ninja lldb and then python bin/llvm-lit.py -sv ~/lldb/lit/SymbolFile at
which point you'll get a segfault that tells you nothing about what your
problem is.
I started trying to fix the issues with bandaids, but it became clear
that the proper solution was to just bring in the work I did in the rest
of the projects. The side benefit of this is that the lit configuration
files become much cleaner and more understandable as a result.
Differential Revision: https://reviews.llvm.org/D54009
llvm-svn: 346008
Summary:
The hot and cold count thresholds are derived from the summary, but for
debugging purposes it is convenient to provide the actual thresholds.
Reviewers: davidxl
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D54040
llvm-svn: 346005
Model this function more closely after the BasicTTIImpl version, with
separate handling of loads and stores. For loads, the set of actually loaded
vectors is checked.
This makes it more readable and just slightly more accurate generally.
Review: Ulrich Weigand
https://reviews.llvm.org/D53071
llvm-svn: 345998
As reported in PR38952, postra-machine-sink relies on DBG_VALUE insns being
adjacent to the def of the register that they reference. This is not always
true, leading to register copies being sunk but not the associated DBG_VALUEs,
which gives the debugger a bad variable location.
This patch collects DBG_VALUEs as we walk through a BB looking for copies to
sink, then passes them down to performSink. Compile-time impact should be
negligable.
Differential Revision: https://reviews.llvm.org/D53992
llvm-svn: 345996
Small-data (i.e. GP-relative) loads and stores allow 16-bit scaled
offset. For a load of a value of type T, the small-data area is
equivalent to an array "T sdata[65536]". This implies that objects
of smaller sizes need to be closer to the beginning of sdata,
while larger objects may be farther away, or otherwise the offset
may be insufficient to reach it. Similarly, an object of a larger
size should not be accessed via a load of a smaller size.
llvm-svn: 345975
Summary:
If the output of debug directives only is requested, we should drop
emission of ',debug' option from the target directive. Required for
supporting of nvprof profiler.
Reviewers: probinson, echristo, dblaikie
Subscribers: Hahnfeld, jholewinski, llvm-commits, JDevlieghere, aprantl
Differential Revision: https://reviews.llvm.org/D46061
llvm-svn: 345972
Summary:
Change the dynamic cast in CallBase::getCalledFunction() to allow
null-valued function operands.
This patch fixes a crash that occurred when a funtion operand of a
call instruction was dropped, and later on a metadata-carrying
instruction was printed out. When allocating the metadata slot numbers,
getCalledFunction() would be invoked on the call with the dropped
operand, resulting in a failed non-null assertion in isa<>.
This fixes PR38924, in which a printout in DBCE crashed due to this.
This aligns getCalledFunction() with getCalledValue(), as the latter
allows the operand to be null.
Reviewers: vsk, dexonsmith, hfinkel
Reviewed By: dexonsmith
Subscribers: hfinkel, llvm-commits
Differential Revision: https://reviews.llvm.org/D52537
llvm-svn: 345966
reduceBuildVecConvertToConvertBuildVec vectorizes int2float in the DAGCombiner, which means that even if the LV/SLP has decided to keep scalar code using the cost models, this will override this.
While there are cases where vectorization is necessary in the DAG (mainly due to legalization artefacts), I don't think this is the case here, we should assume that the vectorizers know what they are doing.
Differential Revision: https://reviews.llvm.org/D53712
llvm-svn: 345964
UBSan detected an error in our ISelLowering that is exposed only when
you have a dmask == 0x1. Fix this by adding in an explicit check to
ensure we don't do the UBSan detected shl << 32.
llvm-svn: 345962
Declaration and definition have slightly different names with a typo in the
declaration, which leads to a link error.
See the following bug report for more details: https://bugs.llvm.org/show_bug.cgi?id=39523
llvm-svn: 345960
Fix PR39417, PR39497
The loop vectorizer may generate runtime SCEV checks for overflow and stride==1
cases, leading to execution of original scalar loop. The latter is forbidden
when optimizing for size. An assert introduced in r344743 triggered the above
PR's showing it does happen. This patch fixes this behavior by preventing
vectorization in such cases.
Differential Revision: https://reviews.llvm.org/D53612
llvm-svn: 345959
