This conversion was done with the following bash script:
find test/Transforms -name "*.ll" | \
while read NAME; do
echo "$NAME"
if ! grep -q "^; *RUN: *llc" $NAME; then
TEMP=`mktemp -t temp`
cp $NAME $TEMP
sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \
while read FUNC; do
sed -i '' "s/;\(.*\)\([A-Za-z0-9_]*\):\( *\)define\([^@]*\)@$FUNC\([( ]*\)\$/;\1\2-LABEL:\3define\4@$FUNC(/g" $TEMP
done
mv $TEMP $NAME
fi
done
llvm-svn: 186269
This update was done with the following bash script:
find test/Transforms -name "*.ll" | \
while read NAME; do
echo "$NAME"
if ! grep -q "^; *RUN: *llc" $NAME; then
TEMP=`mktemp -t temp`
cp $NAME $TEMP
sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \
while read FUNC; do
sed -i '' "s/;\(.*\)\([A-Za-z0-9_]*\):\( *\)@$FUNC\([( ]*\)\$/;\1\2-LABEL:\3@$FUNC(/g" $TEMP
done
mv $TEMP $NAME
fi
done
llvm-svn: 186268
Summary:
Statistics are still available in Release+Asserts (any +Asserts builds),
and stats can also be turned on with LLVM_ENABLE_STATS.
Move some of the FastISel stats that were moved under DEBUG()
back out of DEBUG(), since stats are disabled across the board now.
Many tests depend on grepping "-stats" output. Move those into
a orig_dir/Stats/. so that they can be marked as unsupported
when building without statistics.
Differential Revision: http://llvm-reviews.chandlerc.com/D486
llvm-svn: 176733
reachablity.
We conservatively approximate the reachability analysis by saying it is not
reachable if there is a single path starting from "From" and the path does not
reach "To".
rdar://12801584
llvm-svn: 171512
Accordingly, update a testcase with a broken datalayout string.
Also, we never parse negative numbers, because '-' is used as a
separator. Therefore, use unsigned as result type.
llvm-svn: 168785
loads. It's not really profitable and may result in GVN going into an infinite
loop when it hits constructs like this:
%x = gep %some.type %x, ...
Found via an LTO build of LLVM.
llvm-svn: 166490
This disables malloc-specific optimization when -fno-builtin (or -ffreestanding)
is specified. This has been a problem for a long time but became more severe
with the recent memory builtin improvements.
Since the memory builtin functions are used everywhere, this required passing
TLI in many places. This means that functions that now have an optional TLI
argument, like RecursivelyDeleteTriviallyDeadFunctions, won't remove dead
mallocs anymore if the TLI argument is missing. I've updated most passes to do
the right thing.
Fixes PR13694 and probably others.
llvm-svn: 162841
I really need to find a way to automate this, but I can't come up with a regex
that has no false positives while handling tricky cases like custom check
prefixes.
llvm-svn: 162097
where some fact lake a=b dominates a use in a phi, but doesn't dominate the
basic block itself.
This feature could also be implemented by splitting critical edges, but at least
with the current algorithm reasoning about the dominance directly is faster.
The time for running "opt -O2" in the testcase in pr10584 is 1.003 times slower
and on gcc as a single file it is 1.0007 times faster.
llvm-svn: 162023
another mechanical change accomplished though the power of terrible Perl
scripts.
I have manually switched some "s to 's to make escaping simpler.
While I started this to fix tests that aren't run in all configurations,
the massive number of tests is due to a really frustrating fragility of
our testing infrastructure: things like 'grep -v', 'not grep', and
'expected failures' can mask broken tests all too easily.
Essentially, I'm deeply disturbed that I can change the testsuite so
radically without causing any change in results for most platforms. =/
llvm-svn: 159547
versions of Bash. In addition, I can back out the change to the lit
built-in shell test runner to support this.
This should fix the majority of fallout on Darwin, but I suspect there
will be a few straggling issues.
llvm-svn: 159544
This was done through the aid of a terrible Perl creation. I will not
paste any of the horrors here. Suffice to say, it require multiple
staged rounds of replacements, state carried between, and a few
nested-construct-parsing hacks that I'm not proud of. It happens, by
luck, to be able to deal with all the TCL-quoting patterns in evidence
in the LLVM test suite.
If anyone is maintaining large out-of-tree test trees, feel free to poke
me and I'll send you the steps I used to convert things, as well as
answer any painful questions etc. IRC works best for this type of thing
I find.
Once converted, switch the LLVM lit config to use ShTests the same as
Clang. In addition to being able to delete large amounts of Python code
from 'lit', this will also simplify the entire test suite and some of
lit's architecture.
Finally, the test suite runs 33% faster on Linux now. ;]
For my 16-hardware-thread (2x 4-core xeon e5520): 36s -> 24s
llvm-svn: 159525
replacement to make it at least as generic as the instruction being replaced.
This includes:
* dropping nsw/nuw flags
* getting the least restrictive tbaa and fpmath metadata
* merging ranges
Fixes PR12979.
llvm-svn: 157958
leader table. That's because it wasn't expecting instructions to turn up as
leader for a value number that is not its own, but equality propagation could
create this situation. One solution is to have the leader table use a WeakVH
but this slows down GVN by about 5%. Instead just have equality propagation not
add instructions to the leader table, only constants and arguments. In theory
this might cause GVN to run more (each time it changes something it runs again)
but it doesn't seem to occur enough to cause a slow down.
llvm-svn: 157251
CodeGenPrepare sinks compare instructions down to their uses to prevent
live flags and predicate registers across basic blocks.
PRE of a compare instruction prevents that, forcing the i1 compare
result into a general purpose register. That is usually more expensive
than the redundant compare PRE was trying to eliminate in the first
place.
llvm-svn: 153657
equalities into phi node operands for which the equality is known to
hold in the incoming basic block. That's because replaceAllDominatedUsesWith
wasn't handling phi nodes correctly in general (that this didn't give wrong
results was just luck: the specific way GVN uses replaceAllDominatedUsesWith
precluded wrong changes to phi nodes).
llvm-svn: 152006
%cmp (eg: A==B) we already replace %cmp with "true" under the true edge, and
with "false" under the false edge. This change enhances this to replace the
negated compare (A!=B) with "false" under the true edge and "true" under the
false edge. Reported to improve perlbench results by 1%.
llvm-svn: 151517
logic by half: isOnlyReachableViaThisEdge was trying to be clever and
handle the case of a branch to a basic block which is contained in a
loop. This costs a domtree lookup and is completely useless due to
GVN's position in the pass pipeline: all loops have preheaders at this
point, which means it is enough for isOnlyReachableViaThisEdge to check
that Dst has only one predecessor. (I checked this theoretical argument
by running over the entire nightly testsuite, and indeed it is so!).
llvm-svn: 149838
and stores capture) to permit the caller to see each capture point and decide
whether to continue looking.
Use this inside memdep to do an analysis that basicaa won't do. This lets us
solve another devirtualization case, fixing PR8908!
llvm-svn: 144580
switch (n) {
case 27:
do_something(x);
...
}
the call do_something(x) will be replaced with do_something(27). In
gcc-as-one-big-file this results in the removal of about 500 lines of
bitcode (about 0.02%), so has about 1/10 of the effect of propagating
branch conditions.
llvm-svn: 141360
branch "br i1 %x, label %if_true, label %if_false" then it replaces
"%x" with "true" in places only reachable via the %if_true arm, and
with "false" in places only reachable via the %if_false arm. Except
that actually it doesn't: if value numbering shows that %y is equal
to %x then, yes, %y will be turned into true/false in this way, but
any occurrences of %x itself are not transformed. Fix this. What's
more, it's often the case that %x is an equality comparison such as
"%x = icmp eq %A, 0", in which case every occurrence of %A that is
only reachable via the %if_true arm can be replaced with 0. Implement
this and a few other variations on this theme. This reduces the number
of lines of LLVM IR in "GCC as one big file" by 0.2%. It has a bigger
impact on Ada code, typically reducing the number of lines of bitcode
by around 0.4% by removing repeated compiler generated checks. Passes
the LLVM nightly testsuite and the Ada ACATS testsuite.
llvm-svn: 141177
it's OK for the false/true destination to have multiple
predecessors as long as the extra ones are dominated by
the branch destination.
llvm-svn: 141176
any given function. As pointed out by John McCall, this is needed to
have redundant eh.typeid.for tests be eliminated in the presence of
cleanups.
llvm-svn: 139360
duplicate tests are eliminated (for example if the two functions both have
a catch clause catching the same type, ensure the redundant one is removed).
Note that it would probably be safe to say that eh.typeid.for is 'const',
but since two calls to it with the same argument can give different results
(but only if the calls are in different functions), it seems more correct to
mark it only 'pure'; this doesn't get in the way of the optimization.
llvm-svn: 139236
for pre-2.9 bitcode files. We keep x86 unaligned loads, movnt, crc32, and the
target indep prefetch change.
As usual, updating the testsuite is a PITA.
llvm-svn: 133337
redundant with partially-aliasing loads.
When computing what portion of a clobbering load value is needed,
it doesn't consider phi-translation which may have occurred
between the clobbing load and the redundant load.
llvm-svn: 132631
