During D88827 it was requested to remove the local implementation
of Memory/File Buffers:
// TODO: refactor the buffer classes in LLVM to enable us to use them here
// directly.
This patch uses raw_ostream instead of Buffers. Generally, using streams
could allow us to reduce memory usages. No need to load all data into the
memory - the data could be streamed through a smaller buffer.
Thus, this patch uses raw_ostream as an interface for output data:
Error executeObjcopyOnBinary(CopyConfig &Config,
object::Binary &In,
raw_ostream &Out);
Note 1. This patch does not change the implementation of Writers
so that data would be directly stored into raw_ostream.
This is assumed to be done later.
Note 2. It would be better if Writers would be implemented in a such way
that data could be streamed without seeking/updating. If that would be
inconvenient then raw_ostream could be replaced with raw_pwrite_stream
to have a possibility to seek back and update file headers.
This is assumed to be done later if necessary.
Note 3. Current FileOutputBuffer allows using a memory-mapped file.
The raw_fd_ostream (which could be used if data should be stored in the file)
does not allow us to use a memory-mapped file. Memory map functionality
could be implemented for raw_fd_ostream:
It is possible to add resize() method into raw_ostream.
class raw_ostream {
void resize(uint64_t size);
}
That method, implemented for raw_fd_ostream, could create a memory-mapped file.
The streamed data would be written into that memory file then.
Thus we would be able to use memory-mapped files with raw_fd_ostream.
This is assumed to be done later if necessary.
Differential Revision: https://reviews.llvm.org/D91028
D96109 was recently submitted which contains the refactored implementation of
-funique-internal-linakge-names by adding the unique suffixes in clang rather
than as an LLVM pass. Deleting the former implementation in this change.
Differential Revision: https://reviews.llvm.org/D98234
llvm-jitlink and llvm-jitlink-executor make use of APIs that are
part of the socket and nsl libraries on SunOS systems (Solaris and
Illumos). Make sure they get linked.
Ran into this in Rust CI when cross-compiling LLVM 12 to these
targets.
Differential Revision: https://reviews.llvm.org/D97633
This diff introduces --keep-undefined in llvm-objcopy/llvm-strip for Mach-O
which makes the tools preserve undefined symbols.
Test plan: make check-all
Differential revision: https://reviews.llvm.org/D97040
Context-sensitive AutoFDO profile has a different name scheme where full calling contexts are encoded as function names. When processing CS proifle, llvm-profdata should use full contexts instead of leaf function names.
Reviewed By: wmi, wenlei, wlei
Differential Revision: https://reviews.llvm.org/D97998
[llvm-exegesis] Disable the LBR check on AMD
https://bugs.llvm.org/show_bug.cgi?id=48918
The bug reported a hang (or very very slow runtime) on a Zen2. Unfortunately, we don't have the hardware right now to debug it and I was not able to reproduce the bug on a HSW.
Theory we've got is that the lbr-checking code could be confused on AMD.
Differential Revision: https://reviews.llvm.org/D97504
New change:
- Surround usages of x86 helper in llvm-exegesis/X86/Target.cpp with ifdef
- Fix bug which caused the caller of getVendorSignature to not have a copy of EAX that it expected.
With reference types, tables can have non-zero table numbers. This
commit adds support for element sections against these tables.
Differential Revision: https://reviews.llvm.org/D97923
The code was using the standard isalnum function which doesn't handle
values outside the non-ascii range. Switching to using llvm::isAlnum
instead ensures we don't provoke undefined behaviour, which can in some
cases result in crashes.
Reviewed by: MaskRay
Differential Revision: https://reviews.llvm.org/D97663
This pass runs in any situations but we skip it when it is not O0 and the
function doesn't have optnone attribute. With -O0, the def of shape to amx
intrinsics is near the amx intrinsics code. We are not able to find a
point which post-dominate all the shape and dominate all amx intrinsics.
To decouple the dependency of the shape, we transform amx intrinsics
to scalar operation, so that compiling doesn't fail. In long term, we
should improve fast register allocation to allocate amx register.
Reviewed By: pengfei
Differential Revision: https://reviews.llvm.org/D93594
This change adds '-use-interfacestub' option to allow llvm-ifs
to use InterfaceStub lib when generating ELF binary.
Differential Revision: https://reviews.llvm.org/D94461
https://bugs.llvm.org/show_bug.cgi?id=48918
The bug reported a hang (or very very slow runtime) on a Zen2. Unfortunately, we don't have the hardware right now to debug it and I was not able to reproduce the bug on a HSW.
Theory we've got is that the lbr-checking code could be confused on AMD.
Differential Revision: https://reviews.llvm.org/D97504
This patch adds a pipeline to support in-order CPUs such as ARM
Cortex-A55.
In-order pipeline implements a simplified version of Dispatch,
Scheduler and Execute stages as a single stage. Entry and Retire
stages are common for both in-order and out-of-order pipelines.
Differential Revision: https://reviews.llvm.org/D94928
The help text and documentation for the --discard-all option failed to
mention that the option also causes the removal of debug sections. This
change fixes both for both llvm-objcopy and llvm-strip.
Reviewed by: MaskRay
Differential Revision: https://reviews.llvm.org/D97662
The check for whether an extended symbol index table was required
dropped the first SHN_LORESERVE sections from the sections array before
checking whether the remaining sections had symbols. Unfortunately, the
null section header is not present in this list, so the check was
skipping the first section that might be important. If that section
contained a symbol, and no subsequent ones did, the .symtab_shndx
section would not be emitted, leading to a corrupt object.
Also consolidate and expand test coverage in the area to cover this bug
and other aspects of the SYMTAB_SHNDX section.
Reviewed by: alexshap, MaskRay
Differential Revision: https://reviews.llvm.org/D97661
This reverts commit 900f076113302e26e1939541b546b0075e3e9721 and attempts an actual fix: All failing tests for llvm-jitlink use the `-noexec` flag. The inputs they operate on are not meant for execution on the host system. Looking e.g. at the MachO_test_harness_harnesss.s test, llvm-mc generates input machine code with "x86_64-apple-macosx10.9".
My previous attempt in bbdb4c8c9bcef0e8db751630accc04ad874f54e7 disabled the debug support plugin for Windows targets, but what we would actually want is to disable it on Windows HOSTS.
With the new patch here, I don't do exactly that, but instead follow the approach for the EH frame plugin and include the `-noexec` flag in the condition. It should have the desired effect when it comes to the test suite. It appears a little workaround'ish, but should work reliably for now. I will discuss the issue with Lang and see if we can do better. Thanks @thakis again for the temporary fix.
Previously we errored out when disassembling illegal instructions and there would be no profile generated. In fact illegal instructions are not uncommon and we'd better skip them and print "unknown" instead of erroring out. This matches the behavior of llvm-objdump (see disassembleObject in llvm-objdump.cpp).
Reviewed By: wlei, wenlei
Differential Revision: https://reviews.llvm.org/D97776
Currently, getSourceFile accesses file system to check if two paths are
the same file with a thread lock, which is a huge performance bottleneck
in some cases. Currently, it's accessing file system size(files) * size(files) times.
Thus, cache file status information, which reduces file system access to size(files) times.
When I tested it with two binaries and 16 cpu cores,
it saved over 70% of time.
Binary 1: 56 secs -> 3 secs
Binary 2: 17 hours -> 4 hours
Differential Revision: https://reviews.llvm.org/D97061
fix attempt http://reviews.llvm.org/rGbbdb4c8c9bcef0e didn't work
The problem is that the test tries to look up
llvm_orc_registerJITLoaderGDBWrapper from the llvm-jitlink.exe
executable, but the symbol wasn't exported. Just manually export it
for now. There's a FIXME with a suggestion for a real fix.
lli aims to provide both, RuntimeDyld and JITLink, as the dynamic linkers/loaders for it's JIT implementations. And they both offer debugging via the GDB JIT interface, which builds on the two well-known symbol names `__jit_debug_descriptor` and `__jit_debug_register_code`. As these symbols must be unique accross the linked executable, we can only define them in one of the libraries and make the other depend on it. OrcTargetProcess is a minimal stub for embedding a JIT client in remote executors. For the moment it seems reasonable to have the definition there and let ExecutionEngine depend on it, until we find a better solution.
This is the second commit for the reviewed patch.
Reviewed By: lhames
Differential Revision: https://reviews.llvm.org/D97339
Add a new ObjectLinkingLayer plugin `DebugObjectManagerPlugin` and infrastructure to handle creation of `DebugObject`s as well as their registration in OrcTargetProcess. The current implementation only covers ELF on x86-64, but the infrastructure is not limited to that.
The journey starts with a new `LinkGraph` / `JITLinkContext` pair being created for a `MaterializationResponsibility` in ORC's `ObjectLinkingLayer`. It sends a `notifyMaterializing()` notification, which is forwarded to all registered plugins. The `DebugObjectManagerPlugin` aims to create a `DebugObject` form the provided target triple and object buffer. (Future implementations might create `DebugObject`s from a `LinkGraph` in other ways.) On success it will track it as the pending `DebugObject` for the `MaterializationResponsibility`.
This patch only implements the `ELFDebugObject` for `x86-64` targets. It follows the RuntimeDyld approach for debug object setup: it captures a copy of the input object, parses all section headers and prepares to patch their load-address fields with their final addresses in target memory. It instructs the plugin to report the section load-addresses once they are available. The plugin overrides `modifyPassConfig()` and installs a JITLink post-allocation pass to capture them.
Once JITLink emitted the finalized executable, the plugin emits and registers the `DebugObject`. For emission it requests a new `JITLinkMemoryManager::Allocation` with a single read-only segment, copies the object with patched section load-addresses over to working memory and triggers finalization to target memory. For registration, it notifies the `DebugObjectRegistrar` provided in the constructor and stores the previously pending`DebugObject` as registered for the corresponding MaterializationResponsibility.
The `DebugObjectRegistrar` registers the `DebugObject` with the target process. `llvm-jitlink` uses the `TPCDebugObjectRegistrar`, which calls `llvm_orc_registerJITLoaderGDBWrapper()` in the target process via `TargetProcessControl` to emit a `jit_code_entry` compatible with the GDB JIT interface [1]. So far the implementation only supports registration and no removal. It appears to me that it wouldn't raise any new design questions, so I left this as an addition for the near future.
[1] https://sourceware.org/gdb/current/onlinedocs/gdb/JIT-Interface.html
Reviewed By: lhames
Differential Revision: https://reviews.llvm.org/D97335
The argument value determines the dynamic linker to use (`default`, `rtdyld` or `jitlink`). The JITLink implementation only supports in-process JITing for now. This is the first commit for the reviewed patch.
Reviewed By: lhames
Differential Revision: https://reviews.llvm.org/D97339
When lli runs the below IR, it emits in-memory debug objects and registers them with the GDB JIT interface. The tests dump and check the registered information. IR has limited ability to produce complex output in a portable way. Instead the tests rely on built-in functions implemented in lli. They use a new command line flag `-generate=function-name` to instruct the ORC JIT to expose the built-in function with the given name to the JITed program.
`debug-descriptor-elf-minimal.ll` calls `__dump_jit_debug_descriptor()` to reflect the list of debug entries issued for itself after emitting the main module. The output is textual and can be checked straight away.
`debug-objects-elf-minimal.ll` calls `__dump_jit_debug_objects()`, which instructs lli to walk through the list of debug entries and append the encountered in-memory objects to the program output. We feed this output into llvm-dwarfdump to parse the DWARF in each file and dump their structures.
We can do the same for JITLink once D97335 has landed.
Reviewed By: lhames
Differential Revision: https://reviews.llvm.org/D97694
The situation with inline asm/MC error reporting is kind of messy at the
moment. The errors from MC layout are not reliably propagated and users
have to specify an inlineasm handler separately to get inlineasm
diagnose. The latter issue is not a correctness issue but could be improved.
* Kill LLVMContext inlineasm diagnose handler and migrate it to use
DiagnoseInfo/DiagnoseHandler.
* Introduce `DiagnoseInfoSrcMgr` to diagnose SourceMgr backed errors. This
covers use cases like inlineasm, MC, and any clients using SourceMgr.
* Move AsmPrinter::SrcMgrDiagInfo and its instance to MCContext. The next step
is to combine MCContext::SrcMgr and MCContext::InlineSrcMgr because in all
use cases, only one of them is used.
* If LLVMContext is available, let MCContext uses LLVMContext's diagnose
handler; if LLVMContext is not available, MCContext uses its own default
diagnose handler which just prints SMDiagnostic.
* Change a few clients(Clang, llc, lldb) to use the new way of reporting.
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D97449
So far we had no way to distinguish between JITLink and RuntimeDyld in lli. Instead, we used implicit knowledge that RuntimeDyld would be used for linking ELF. In order to get D97337 to work with lli though, we have to move on and allow JITLink for ELF. This patch uses extensible RTTI to allow external clients to add their own layers without touching the LLVM sources.
Reviewed By: lhames
Differential Revision: https://reviews.llvm.org/D97338
This makes the behavior similar to cp
```
chmod u+s,g+s,o+x a
sudo llvm-strip a -o b
// With this patch, b drops set-user-ID and set-group-ID bits.
// sudo cp a b => b does not have set-user-ID or set-group-ID bits.
```
This also changes the behavior for the following case:
```
chmod u+s,g+s,o+x a
llvm-strip a
// a preserves set-user-ID and set-group-ID bits.
// This matches binutils<2.36 and probably >=2.37. 2.36 and 2.36.1 have some compatibility issues.
```
Differential Revision: https://reviews.llvm.org/D97253
Under certain (currently unknown) conditions, llvm-profdata is outputting
profiles that have two consecutive entries in the MemOPSize section for the
value 0. This causes the PGOMemOPSizeOpt pass to output an invalid switch
instruction with two cases for 0. As mentioned, we’re not quite sure what’s
causing this to happen, but this patch prevents llvm-profdata from outputting a
profile that has this problem and gives an error with a request for a
reproducible.
Differential Revision: https://reviews.llvm.org/D92074
As discussed in D95511, this allows us to encode invalid BBAddrMap
sections to be used in more rigorous testing.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D96831
Small optimization of the code -- No need to calculate any stats
for NULL nodes, and also no need to call the collectStatsForDie()
if it is the CU itself.
Differential Revision: https://reviews.llvm.org/D96871
The presence or absence of an inline variable (as well as formal
parameter) with only an abstract_origin ref (without DW_AT_location)
should not change the location coverage.
It means, for both:
DW_TAG_inlined_subroutine
DW_AT_abstract_origin (0x0000004e "f")
DW_AT_low_pc (0x0000000000000010)
DW_AT_high_pc (0x0000000000000013)
DW_TAG_formal_parameter
DW_AT_abstract_origin (0x0000005a "b")
and,
DW_TAG_inlined_subroutine
DW_AT_abstract_origin (0x0000004e "f")
DW_AT_low_pc (0x0000000000000010)
DW_AT_high_pc (0x0000000000000013)
we should report 0% location coverage. If we add DW_AT_location,
for both cases the coverage should be improved.
Differential Revision: https://reviews.llvm.org/D96045
Some instructions defined in table-gen files sets usesCustomInserter
bit, which means it has to be lowered by target code and isn't actually
valid instruction at MC level. So we should treat them like pseudo
instructions.
Reviewed By: gchatelet
Differential Revision: https://reviews.llvm.org/D94898
As discussed on the RFC [0], I am sharing the set of patches that
enables checking of original Debug Info metadata preservation in
optimizations. The proof-of-concept/proposal can be found at [1].
The implementation from the [1] was full of duplicated code,
so this set of patches tries to merge this approach into the existing
debugify utility.
For example, the utility pass in the original-debuginfo-check
mode could be invoked as follows:
$ opt -verify-debuginfo-preserve -pass-to-test sample.ll
Since this is very initial stage of the implementation,
there is a space for improvements such as:
- Add support for the new pass manager
- Add support for metadata other than DILocations and DISubprograms
[0] https://groups.google.com/forum/#!msg/llvm-dev/QOyF-38YPlE/G213uiuwCAAJ
[1] https://github.com/djolertrk/llvm-di-checker
Differential Revision: https://reviews.llvm.org/D82545
The test that was failing is now forced to use the old PM.
As discussed on the RFC [0], I am sharing the set of patches that
enables checking of original Debug Info metadata preservation in
optimizations. The proof-of-concept/proposal can be found at [1].
The implementation from the [1] was full of duplicated code,
so this set of patches tries to merge this approach into the existing
debugify utility.
For example, the utility pass in the original-debuginfo-check
mode could be invoked as follows:
$ opt -verify-debuginfo-preserve -pass-to-test sample.ll
Since this is very initial stage of the implementation,
there is a space for improvements such as:
- Add support for the new pass manager
- Add support for metadata other than DILocations and DISubprograms
[0] https://groups.google.com/forum/#!msg/llvm-dev/QOyF-38YPlE/G213uiuwCAAJ
[1] https://github.com/djolertrk/llvm-di-checker
Differential Revision: https://reviews.llvm.org/D82545
