Background/motivation - I was circling back around to:
https://llvm.org/bugs/show_bug.cgi?id=28296
I made a simple patch for that and noticed some regressions, so added test cases for
those with rL281055, and this is hopefully the minimal fix for just those cases.
But as you can see from the surrounding untouched folds, we are missing commuted patterns
all over the place, and of course there are no regression tests to cover any of those cases.
We could sprinkle "m_c_" dust all over this file and catch most of the missing folds, but
then we still wouldn't have test coverage, and we'd still miss some fraction of commuted
patterns because they require adjustments to the match order.
I'm aware of the concern about the potential compile-time performance impact of adding
matches like this (currently being discussed on llvm-dev), but I don't think there's any
evidence yet to suggest that handling commutative pattern matching more thoroughly is not
a worthwhile goal of InstCombine.
Differential Revision: https://reviews.llvm.org/D24419
llvm-svn: 290067
This reverts commit 289920 (again).
I forgot to implement a Bitcode upgrade for the case where a DIGlobalVariable
has not DIExpression. Unfortunately it is not possible to safely upgrade
these variables without adding a flag to the bitcode record indicating which
version they are.
My plan of record is to roll the planned follow-up patch that adds a
unit: field to DIGlobalVariable into this patch before recomitting.
This way we only need one Bitcode upgrade for both changes (with a
version flag in the bitcode record to safely distinguish the record
formats).
Sorry for the churn!
llvm-svn: 289982
This patch reapplies r289863. The original patch was reverted because it
exposed a bug causing the loop vectorizer to crash in the Python runtime on
PPC. The underlying issue was fixed with r289958.
llvm-svn: 289975
After r288909, instructions feeding predicated instructions may be scalarized
if profitable. Since these instructions will remain scalar, we shouldn't
attempt to type-shrink them. We should only truncate vector types to their
minimal bit widths. This bug was exposed by enabling the vectorization of loops
containing conditional stores by default.
llvm-svn: 289958
stores by default
This uncovers a crasher in the loop vectorizer on PPC when building the
Python runtime. I'll send the testcase to the review thread for the
original commit.
llvm-svn: 289934
This patch implements PR31013 by introducing a
DIGlobalVariableExpression that holds a pair of DIGlobalVariable and
DIExpression.
Currently, DIGlobalVariables holds a DIExpression. This is not the
best way to model this:
(1) The DIGlobalVariable should describe the source level variable,
not how to get to its location.
(2) It makes it unsafe/hard to update the expressions when we call
replaceExpression on the DIGLobalVariable.
(3) It makes it impossible to represent a global variable that is in
more than one location (e.g., a variable with multiple
DW_OP_LLVM_fragment-s). We also moved away from attaching the
DIExpression to DILocalVariable for the same reasons.
This reapplies r289902 with additional testcase upgrades.
<rdar://problem/29250149>
https://llvm.org/bugs/show_bug.cgi?id=31013
Differential Revision: https://reviews.llvm.org/D26769
llvm-svn: 289920
Summary:
Instead of checking whether a global referenced by a function being
imported is defined in the same module, speculatively always add the
referenced globals to the module's export list. After all imports are
computed, for each module prune any not in its defined set from its
export list.
For a huge C++ app with aggressive importing thresholds, even with
D27687 we spent a lot of time invoking modulePath() from
exportGlobalInModule (modulePath() was still the 2nd hottest routine in
profile). The reason is that with comdat/linkonce the summary lists for
each GUID can be long. For the app in question, for example, we were
invoking exportGlobalInModule almost 2 million times, and we traversed
an average of 63 entries in the summary list each time.
This patch reduced the thin link time for the app by about 10% (on top
of D27687) when using aggressive importing thresholds, and about 3.5% on
average with default importing thresholds.
Reviewers: mehdi_amini
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D27755
llvm-svn: 289918
This patch implements PR31013 by introducing a
DIGlobalVariableExpression that holds a pair of DIGlobalVariable and
DIExpression.
Currently, DIGlobalVariables holds a DIExpression. This is not the
best way to model this:
(1) The DIGlobalVariable should describe the source level variable,
not how to get to its location.
(2) It makes it unsafe/hard to update the expressions when we call
replaceExpression on the DIGLobalVariable.
(3) It makes it impossible to represent a global variable that is in
more than one location (e.g., a variable with multiple
DW_OP_LLVM_fragment-s). We also moved away from attaching the
DIExpression to DILocalVariable for the same reasons.
<rdar://problem/29250149>
https://llvm.org/bugs/show_bug.cgi?id=31013
Differential Revision: https://reviews.llvm.org/D26769
llvm-svn: 289902
This pass prepares a module containing type metadata for ThinLTO by splitting
it into regular and thin LTO parts if possible, and writing both parts to
a multi-module bitcode file. Modules that do not contain type metadata are
written unmodified as a single module.
All globals with type metadata are added to the regular LTO module, and
the rest are added to the thin LTO module.
Differential Revision: https://reviews.llvm.org/D27324
llvm-svn: 289899
Summary:
We were reinvoking exportGlobalInModule numerous times redundantly.
No need to re-export globals referenced by a global that was already
imported from its module. This resulted in a large speedup in the thin
link for a big application, particularly when importing aggressiveness
was cranked up.
Reviewers: mehdi_amini
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D27687
llvm-svn: 289896
Lowering to llvm.cttz() will result in constant folding anyway
if the argument to ffs is a constant. Pointed out by Eli for
fls() in D14590.
llvm-svn: 289888
The code change for D27687 accidentally got committed along with the
main change in r289843. Revert it temporarily, so that I can recommit it
along with its test as intended.
llvm-svn: 289875
Summary:
Thin link efficiency improvement. After adding an importing candidate to
the worklist we might have later added it again with a higher threshold.
Skip it when popped from the worklist if we recorded a higher threshold
than the current worklist entry, it will get processed again at the
higher threshold when that entry is popped.
This required adding the summary's GUID to the worklist, so that it can
be used to query the recorded highest threshold for it when we pop from the
worklist.
Reviewers: mehdi_amini
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D27696
llvm-svn: 289867
This patch sets the default value of the "-enable-cond-stores-vec" command line
option to "true".
Differential Revision: https://reviews.llvm.org/D27814
llvm-svn: 289863
Now that a new API to merge debug locations has been committed at r289661 (see
review D26256 for more details), we can use it to "improve" the code added by
revision r280995.
Instead of nulling the debugloc of a commoned instruction, we use the 'merged'
debug location. At the moment, this is just a no functional change since
function `DILocation::getMergedLocation()` is just a stub and would always
return a null location.
Differential Revision: https://reviews.llvm.org/D27804
llvm-svn: 289862
Min/max canonicalization (r287585) exposes the fact that we're missing combines for min/max patterns.
This patch won't solve the example that was attached to that thread, so something else still needs fixing.
The line between InstCombine and InstSimplify gets blurry here because sometimes the icmp instruction that
we want to fold to already exists, but sometimes it's the swapped form of what we want.
Corresponding changes for smax/umin/umax to follow.
Differential Revision: https://reviews.llvm.org/D27531
llvm-svn: 289855
This is split out from D27696, since it turned out to be a bug fix and
not part of the NFC efficiency change.
Keep the same adjusted (possibly decayed) threshold in both the worklist
and the ImportList. Otherwise if we encountered it first along a cold
path, the callee would be added to the worklist with a lower decayed
threshold than when it is later encountered along a hot path. But the
logic uses the threshold recorded in the ImportList entry to check if
we should re-add it, and without this patch the threshold recorded there
is the same along both paths so we don't re-add it. Using the
same possibly decayed threshold in the ImportList ensures we re-add it
later with the higher non-decayed hot path threshold.
llvm-svn: 289843
Simplify CFG will try to sink the last instruction in a series of basic blocks,
creating a "common" instruction in the successor block (sinkLastInstruction).
When it does this, the debug location of the single instruction should be the
merged debug locations of the commoned instructions.
Differential Revision: https://reviews.llvm.org/D27590
llvm-svn: 289828
A number of new patterns for simplifying and/xor of icmp:
(icmp ne %x, 0) ^ (icmp ne %y, 0) => icmp ne %x, %y if the following is true:
1- (%x = and %a, %mask) and (%y = and %b, %mask)
2- %mask is a power of 2.
(icmp eq %x, 0) & (icmp ne %y, 0) => icmp ult %x, %y if the following is true:
1- (%x = and %a, %mask1) and (%y = and %b, %mask2)
2- Let %t be the smallest power of 2 where %mask1 & %t != 0. Then for any
%s that is a power of 2 and %s & %mask2 != 0, we must have %s <= %t.
For example if %mask1 = 24 and %mask2 = 16, setting %s = 16 and %t = 8
violates condition (2) above. So this optimization cannot be applied.
llvm-svn: 289813
After r289755, the AssumptionCache is no longer needed. Variables affected by
assumptions are now found by using the new operand-bundle-based scheme. This
new scheme is more computationally efficient, and also we need much less
code...
llvm-svn: 289756
There was an efficiency problem with how we processed @llvm.assume in
ValueTracking (and other places). The AssumptionCache tracked all of the
assumptions in a given function. In order to find assumptions relevant to
computing known bits, etc. we searched every assumption in the function. For
ValueTracking, that means that we did O(#assumes * #values) work in InstCombine
and other passes (with a constant factor that can be quite large because we'd
repeat this search at every level of recursion of the analysis).
Several of us discussed this situation at the last developers' meeting, and
this implements the discussed solution: Make the values that an assume might
affect operands of the assume itself. To avoid exposing this detail to
frontends and passes that need not worry about it, I've used the new
operand-bundle feature to add these extra call "operands" in a way that does
not affect the intrinsic's signature. I think this solution is relatively
clean. InstCombine adds these extra operands based on what ValueTracking, LVI,
etc. will need and then those passes need only search the users of the values
under consideration. This should fix the computational-complexity problem.
At this point, no passes depend on the AssumptionCache, and so I'll remove
that as a follow-up change.
Differential Revision: https://reviews.llvm.org/D27259
llvm-svn: 289755
Summary: SampleProfileLoader pass may be invoked twice by LTO. The 2nd pass should not append more summary info as it is already preset by the 1st pass.
Reviewers: eraman, davidxl
Subscribers: mehdi_amini, llvm-commits
Differential Revision: https://reviews.llvm.org/D27733
llvm-svn: 289725
Summary: We used to create SampleProfileLoader pass in clang. This makes LTO/ThinLTO unable to add this pass in the linker plugin. This patch moves the SampleProfileLoader pass creation from clang to llvm pass manager builder.
Reviewers: tejohnson, davidxl, dnovillo
Subscribers: llvm-commits, mehdi_amini
Differential Revision: https://reviews.llvm.org/D27743
llvm-svn: 289714
If all the operands to a phi node are compares that have a RHS constant,
instcombine will try to pull them through the phi node, combining them into
a single operation. When it does this, the debug location of the new op
should be the merged debug locations of the phi node arguments.
Patch 8 of 8 for D26256. Folding of a compare that has a RHS constant.
Differential Revision: https://reviews.llvm.org/D26256
llvm-svn: 289704
If all the operands to a phi node are a binop with a RHS constant, instcombine
will try to pull them through the phi node, combining them into a single
operation. When it does this, the debug location of the new op should be the
merged debug locations of the phi node arguments.
Patch 7 of 8 for D26256. Folding of a binop with RHS constant.
Differential Revision: https://reviews.llvm.org/D26256
llvm-svn: 289699
Summary:
Move GVNHoist to later in the optimization pipeline, specifically, to
the function simplification part of the pipeline. The new pipeline
location allows GVNHoist to run on a function after its callees have
been inlined but before the function has been considered for inlining
into its callers, exposing more opportunities for hoisting.
Performance results on AArch64 kryo:
Improvements:
Benchmarks/CoyoteBench/fftbench -24.952%
spec2006/bzip2 -4.071%
internal bmark -3.177%
Benchmarks/PAQ8p/paq8p -1.754%
spec2000/perlbmk -1.328%
spec2006/h264ref -1.140%
Regressions:
internal bmark +1.818%
Benchmarks/mafft/pairlocalalign +1.084%
Reviewers: sebpop, dberlin, hiraditya
Subscribers: aemerson, mehdi_amini, mcrosier, llvm-commits
Differential Revision: https://reviews.llvm.org/D27722
llvm-svn: 289696
If all the operands to a phi node are a cast, instcombine will try to pull
them through the phi node, combining them into a single cast. When it does
this, the debug location of the new cast should be the merged debug locations
of the phi node arguments.
Patch 6 of 8 for D26256. Folding of a cast operation.
Differential Revision: https://reviews.llvm.org/D26256
llvm-svn: 289693
If all the operands to a phi node are a load, instcombine will try to pull
them through the phi node, combining them into a single load. When it does
this, the debug location of the new load should be the merged debug locations
of the phi node arguments.
Patch 5 of 8 for D26256. Folding of a load operation.
Differential Revision: https://reviews.llvm.org/D26256
llvm-svn: 289688
If all the operands to a phi node are getelementptr, instcombine
will try to pull them through the phi node, combining them into a single
operation. When it does this, the debug location of the new getelementptr
should be the merged debug locations of the phi node arguments.
Patch 4 of 8 for D26256. Folding of a getelementptr operation.
Differential Revision: https://reviews.llvm.org/D26256
llvm-svn: 289684
If all the operands to a phi node are of the same operation, instcombine
will try to pull them through the phi node, combining them into a single
operation. When it does this, the debug location of the operation should
be the merged debug locations of the phi node arguments.
Patch 3 of 8 for D26256. Folding of a compare operation.
Differential Revision: https://reviews.llvm.org/D26256
llvm-svn: 289681
If all the operands to a phi node are of the same operation, instcombine
will try to pull them through the phi node, combining them into a single
operation. When it does this, the debug location of the operation should
be the merged debug locations of the phi node arguments.
Patch 2 of 8 for D26256. Folding of a binary operation.
Differential Revision: https://reviews.llvm.org/D26256
llvm-svn: 289679