Scalarization for scalable vectors is not (yet) supported, so the
LV discards a VF when scalarization is chosen as the widening
decision. It should therefore not assert that the VF is not scalable
when it computes the decision to scalarize.
The code can get here when both the interleave-cost, gather/scatter cost
and scalarization-cost are all illegal. This may e.g. happen for SVE
when the VF=1, to avoid generating `<vscale x 1 x eltty>` types that
the code-generator cannot yet handle.
Reviewed By: david-arm
Differential Revision: https://reviews.llvm.org/D106656
See [GRP_COMDAT group with STB_LOCAL signature](https://groups.google.com/g/generic-abi/c/2X6mR-s2zoc)
objcopy PR: https://sourceware.org/bugzilla/show_bug.cgi?id=27931
GRP_COMDAT deduplication is purely based on the signature symbol name in
ld.lld/GNU ld/gold. The local/global status is not part of the equation.
If the signature symbol is localized by --localize-hidden or
--keep-global-symbol, the intention is likely to make the group fully
localized. Drop GRP_COMDAT to suppress deduplication.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D106782
Apparently this fails to line up the types -- try to sidestep the
issue entirely by writing the code in a more reasonable way: Walk
over the operands and perform a set lookup, rather than walking
over the set and performing an operand scan.
For reg+imm SVE addressing mode imm is implictly scaled by VL,
making them impractical for truely immediate offsets. However, if
the offset can be unscaled based on the storage element type we
can use the reg+reg SVE addressing mode and thus either reduce the
number of generate add instructions or replace them with a mov
instruction that can be hoisted from the hot code path.
Differential Revision: https://reviews.llvm.org/D106744
We could try harder to screen out libcalls by
function signature (and that would be a much larger
change than for sprintf alone), but that might make
the transition to type-less pointers more difficult.
https://llvm.org/PR51200
Separate out the BCECmp part from BCECmpBlock, which just stores
the comparison atoms without the branch instruction. At the same
time switch the code to return Optional<> rather than objects in
invalid state and partially constructed objects.
This fixes an issue that was found in D105199, where a GEP instruction
is used both as the address of a store, as well as the value of a store.
For the former, the value is scalar after vectorization, but the latter
(as value) requires widening.
Other code in that function seems to prevent similar cases from happening,
but it seems this case was missed.
Reviewed By: david-arm
Differential Revision: https://reviews.llvm.org/D106164
This patch adds support for the next-generation arch14
CPU architecture to the SystemZ backend.
This includes:
- Basic support for the new processor and its features.
- Detection of arch14 as host processor.
- Assembler/disassembler support for new instructions.
- New LLVM intrinsics for certain new instructions.
- Support for low-level builtins mapped to new LLVM intrinsics.
- New high-level intrinsics in vecintrin.h.
- Indicate support by defining __VEC__ == 10304.
Note: No currently available Z system supports the arch14
architecture. Once new systems become available, the
official system name will be added as supported -march name.
This reverts the revert commit b1777b04dc4b1a9fee0e7effa7e177892ab32ef0.
The patch originally got reverted due to a crash:
https://bugs.chromium.org/p/chromium/issues/detail?id=1232798#c2
The underlying issue was that we were not using the stored values from
the modified memory recipes, but the out-of-date values directly from
the IR (accessed via the VPlan). This should be fixed in d995d6376. A
reduced version of the reproducer has been added in 93664503be6b.
This adjusts mayHaveSideEffect() to return true for !willReturn()
instructions. Just like other side-effects, non-willreturn calls
(aka "divergence") cannot be removed and cannot be reordered relative
to other side effects. This fixes a number of bugs where
non-willreturn calls are either incorrectly dropped or moved. In
particular, it also fixes the last open problem in
https://bugs.llvm.org/show_bug.cgi?id=50511.
I performed a cursory review of all current mayHaveSideEffect()
uses, which convinced me that these are indeed the desired default
semantics. Places that do not want to consider non-willreturn as a
sideeffect generally do not want mayHaveSideEffect() semantics at
all. I identified two such cases, which are addressed by D106591
and D106742. Finally, there is a use in SCEV for which we don't
really have an appropriate API right now -- what it wants is
basically "would this be considered forward progress". I've just
spelled out the previous semantics there.
Differential Revision: https://reviews.llvm.org/D106749
Late in SelectionDAG we join up instruction numbers with their defining
instructions, if it couldn't be done during the main part of SelectionDAG.
One exception is function arguments, where we have to point a DBG_PHI
instruction at the incoming live register, as they don't have a defining
instruction. This patch adds another exception, for constant physregs, like
aarch64 has.
It may seem wasteful to use two instructions where we could use a single
DBG_VALUE, however the whole point of instruction referencing is to
decouple the identification of values from the specification of where
variable location ranges start.
(Part of my aarch64 work to ease adoption of instruction referencing, as
in the meta comment on D104520)
Differential Revision: https://reviews.llvm.org/D104520
Need to fix several cost-related problems. The final type may be defined
incorrectly because of to early definition (we may end up with the wider
type), the CommonCost should not be redefined in ExtractElements
cost related calculations and the shuffle of the final insertelements
vectors should be calculated as a cost of single vector permutations
+ costs of two vector permutations for other n-1 incoming vectors.
Differential Revision: https://reviews.llvm.org/D106578
The current implementation of displaying .stack_size information
presumes that each entry represents a single function but this is not
always the case. For example with the use of ICF multiple functions can
be represented with the same code, meaning that the address found in a
.stack_size entry corresponds to multiple function symbols.
This change allows multiple function names to be displayed when
appropriate.
Differential Revision: https://reviews.llvm.org/D105884
Codegen for the raw/struct buffer access intrinsics would update the
offset in the MMO to reflect the combined offset, if it was known to be
constant. If the combined offset was not known to be constant, or if
there was an index, it would set the offset in the MMO to 0. This is
unsafe because it makes it look like the access does not alias with
another access with a fixed non-zero offset.
Fix these cases by setting the pointer in the MMO to null, to reflect
the fact that we do not have any known IR value pointer + constant
offset for the access.
D106284 did this for SelectionDAG. This is the corresponding fix for
GlobalISel.
Differential Revision: https://reviews.llvm.org/D106451
Codegen for the raw/struct buffer access intrinsics would update the
offset in the MMO to reflect the combined offset, if it was known to be
constant. If the combined offset was not known to be constant, or if
there was an index, it would set the offset in the MMO to 0. This is
unsafe because it makes it look like the access does not alias with
another access with a fixed non-zero offset.
Fix these cases by setting the pointer in the MMO to null, to reflect
the fact that we do not have any known IR value pointer + constant
offset for the access.
Differential Revision: https://reviews.llvm.org/D106284
The register class required for some MVE loads/stores is more
constrained than the register we use when creating postinc. Make sure we
constrain the register class to keep the code correct.
isSafeToSpeculateStore() looks for a preceding store to the same
location to make sure that introducing a new store of the same
value is safe. It currently bails on intervening mayHaveSideEffect()
instructions. However, I believe just checking mayWriteToMemory()
is sufficient there -- we just need to make sure that we know which
value was stored, we don't care if we can unwind in the meantime.
While looking into this, I started having some doubts about the
correctness of the transform with regard to thread safety. While
we don't try to hoist non-simple stores, I believe we also need
to make sure that the preceding store is simple as well. Otherwise
we could introduce a spurious non-atomic write after an atomic write
-- under our memory model this would result in a subsequent undef
atomic read, even if the second write stores the same value as the
first.
Example: https://alive2.llvm.org/ce/z/q_3YAL
Differential Revision: https://reviews.llvm.org/D106742
Fixes more casts to `<FixedVectorType>` for the cases where the
instruction is a Insert/ExtractElementInst.
For fixed-width, this part of truncateToMinimalBitWidths is tested by
AArch64/type-shrinkage-insertelt.ll. I attempted to write a test case for this part
of truncateToMinimalBitWidths which uses scalable vectors, but was unable to add
one. The tests in type-shrinkage-insertelt.ll rely on scalarization to create extract
element instructions for instance, which is not possible for scalable vectors.
Reviewed By: david-arm
Differential Revision: https://reviews.llvm.org/D106163
The pattern for vector_splice with Index equal or bigger than
zero was misplaced in the AddedComplexity = 1 pattern in the AArch64
tablegen file. This patch fixes it by removing vector_splice pattern
from inside AddedComplexity = 1.
Need to fix several cost-related problems. The final type may be defined
incorrectly because of to early definition (we may end up with the wider
type), the CommonCost should not be redefined in ExtractElements
cost related calculations and the shuffle of the final insertelements
vectors should be calculated as a cost of single vector permutations
+ costs of two vector permutations for other n-1 incoming vectors.
Differential Revision: https://reviews.llvm.org/D106578
Tests with multiple benchmarks, like Embench [1], showed that the
CallPenalty magic number has the most influence on inlining decisions
when optimizing for size.
On the other hand, there was no good default value for this parameter.
Some benchmarks profited strongly from a reduced call penalty. On
example is the picojpeg benchmark compiled for RISC-V, which got 6%
smaller with a CallPenalty of 10 instead of 12. Other benchmarks
increased in size, like matmult.
This commit makes the compromise of turning the magic number constant of
CallPenalty into a configurable value. This introduces the flag
`--inline-call-penalty`. With that flag users can fine tune the inliner
to their needs.
The CallPenalty constant was also used for loops. This commit replaces
the CallPenalty constant with a new LoopPenalty constant that is now
used instead.
This is a slimmed down version of https://reviews.llvm.org/D30899
[1]: https://github.com/embench/embench-iot
Differential Revision: https://reviews.llvm.org/D105976
Instead of getting the VPValue for the stored IR values through the
current plan, use the stored value of the recipes directly.
This way, the correct VPValues are used if the store recipes have been
modified in the VPlan and the IR value is not correct any longer. This
can happen, e.g. due to D105008.
Add folds to instcombine to support the removal of select instruction when the masked_load is guaranteed to zero the same lanes, i.e. select(mask, mload(,,mask,0), 0) -> mload(,,mask,0).
Patch originally authored by @paulwalker-arm
Reviewed By: david-arm
Differential Revision: https://reviews.llvm.org/D106376
This patch implements vector_splice in tablegen for all cases when the
Immediate is positive and lower than the known minimum value of
a scalable vector.
Vector_splice can be implemented using SVE instruction EXT.
For instance :
@llvm.experimental.vector.splice(Vector_1, Vector_2, Imm)
@llvm.experimental.vector.splice(<A,B,C,D>, <E,F,G,H>, 1) ==> <B, C, D, E>
EXT Vector_1, Vector_2, Imm // Vector_1 = B, C, D + Vector_2 = E
Depends on D105633
Differential Revision: https://reviews.llvm.org/D106273
This patch implements vector_splice in tablegen for:
a) when the immediate is equal to -1 (Imm==1) and uses:
INSR + LASTB
For instance :
@llvm.experimental.vector.splice(Vector_1, Vector_2, -1)
@llvm.experimental.vector.splice(<A,B,C,D>, <E,F,G,H>, 1) ==> <D, E, F, G>
LAST RegLast, Vector_1 // RegLast = D
INSR Res, (Vector_1 >> 1), RegLast // Res = D + E, F, G
Differential Revision: https://reviews.llvm.org/D105633
I have added a new FastMathFlags parameter to getArithmeticReductionCost
to indicate what type of reduction we are performing:
1. Tree-wise. This is the typical fast-math reduction that involves
continually splitting a vector up into halves and adding each
half together until we get a scalar result. This is the default
behaviour for integers, whereas for floating point we only do this
if reassociation is allowed.
2. Ordered. This now allows us to estimate the cost of performing
a strict vector reduction by treating it as a series of scalar
operations in lane order. This is the case when FP reassociation
is not permitted. For scalable vectors this is more difficult
because at compile time we do not know how many lanes there are,
and so we use the worst case maximum vscale value.
I have also fixed getTypeBasedIntrinsicInstrCost to pass in the
FastMathFlags, which meant fixing up some X86 tests where we always
assumed the vector.reduce.fadd/mul intrinsics were 'fast'.
New tests have been added here:
Analysis/CostModel/AArch64/reduce-fadd.ll
Analysis/CostModel/AArch64/sve-intrinsics.ll
Transforms/LoopVectorize/AArch64/strict-fadd-cost.ll
Transforms/LoopVectorize/AArch64/sve-strict-fadd-cost.ll
Differential Revision: https://reviews.llvm.org/D105432
This patch extends support for (scalable-vector) splats in the
DAGCombiner via the `ISD::matchBinaryPredicate` function, which enable a
variety of simple combines of constants.
Users of this function may now have to distinguish between
`BUILD_VECTOR` and `SPLAT_VECTOR` vector operands. The way of dealing
with this in-tree follows the approach added for
`ISD::matchUnaryPredicate` implemented in D94501.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D106575
to encode the constants for DW_AT_data_member_location.
Summary: In DWARF v3, DW_FORM_data4/8 in
DW_AT_data_member_location are interpreted as location
list pointers. Interpreting constants as pointers is
not expected, so we use DW_FORM_udata to encode the
constants.
Reviewed By: probinson
Differential Revision: https://reviews.llvm.org/D105687
Ensure that libSupport does not carry any static global initializer.
libSupport can be embedded in use cases where we don't want to load all
cl::opt unless we want to parse the command line.
ManagedStatic can be used to enable lazy-initialization of globals.
Summary: yaml2obj shouldn't create the string table that isn't needed
- doing so wastes time and disk space.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D106420
Ensure that libSupport does not carry any static global initializer.
libSupport can be embedded in use cases where we don't want to load all
cl::opt unless we want to parse the command line.
ManagedStatic can be used to enable lazy-initialization of globals.
