This change also introduces a link-time optimization level of 1. This
optimization level runs only the globaldce pass as well as cleanup passes for
passes that run at -O0, specifically simplifycfg which cleans up lowerbitsets.
http://lists.cs.uiuc.edu/pipermail/llvm-commits/Week-of-Mon-20150316/266951.html
llvm-svn: 232769
The issue was that we were always printing the remarks. Fix that and add a test
showing that it prints nothing if -pass-remarks is not given.
Original message:
Correctly handle -pass-remarks in the gold plugin.
llvm-svn: 231273
The issue is that now we have a diag handler during optimizations
and get forward every optimization remark, flooding stdout.
The same filtering should probably be done with or without a
custom handler, but for now just ignore remarks.
Original message:
gold-plugin: "Upgrade" debug info and handle its warnings.
The gold plugin never calls MaterializeModule, so any old debug info
was not deleted and could cause crashes.
Now that it is being "upgraded", the plugin also has to handle warnings
and create Modules with a nice id (it shows in the warning).
llvm-svn: 230991
Essentially the same as the GEP change in r230786.
A similar migration script can be used to update test cases, though a few more
test case improvements/changes were required this time around: (r229269-r229278)
import fileinput
import sys
import re
pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)")
for line in sys.stdin:
sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line))
Reviewers: rafael, dexonsmith, grosser
Differential Revision: http://reviews.llvm.org/D7649
llvm-svn: 230794
One of several parallel first steps to remove the target type of pointers,
replacing them with a single opaque pointer type.
This adds an explicit type parameter to the gep instruction so that when the
first parameter becomes an opaque pointer type, the type to gep through is
still available to the instructions.
* This doesn't modify gep operators, only instructions (operators will be
handled separately)
* Textual IR changes only. Bitcode (including upgrade) and changing the
in-memory representation will be in separate changes.
* geps of vectors are transformed as:
getelementptr <4 x float*> %x, ...
->getelementptr float, <4 x float*> %x, ...
Then, once the opaque pointer type is introduced, this will ultimately look
like:
getelementptr float, <4 x ptr> %x
with the unambiguous interpretation that it is a vector of pointers to float.
* address spaces remain on the pointer, not the type:
getelementptr float addrspace(1)* %x
->getelementptr float, float addrspace(1)* %x
Then, eventually:
getelementptr float, ptr addrspace(1) %x
Importantly, the massive amount of test case churn has been automated by
same crappy python code. I had to manually update a few test cases that
wouldn't fit the script's model (r228970,r229196,r229197,r229198). The
python script just massages stdin and writes the result to stdout, I
then wrapped that in a shell script to handle replacing files, then
using the usual find+xargs to migrate all the files.
update.py:
import fileinput
import sys
import re
ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))")
normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))")
def conv(match, line):
if not match:
return line
line = match.groups()[0]
if len(match.groups()[5]) == 0:
line += match.groups()[2]
line += match.groups()[3]
line += ", "
line += match.groups()[1]
line += "\n"
return line
for line in sys.stdin:
if line.find("getelementptr ") == line.find("getelementptr inbounds"):
if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("):
line = conv(re.match(ibrep, line), line)
elif line.find("getelementptr ") != line.find("getelementptr ("):
line = conv(re.match(normrep, line), line)
sys.stdout.write(line)
apply.sh:
for name in "$@"
do
python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name"
rm -f "$name.tmp"
done
The actual commands:
From llvm/src:
find test/ -name *.ll | xargs ./apply.sh
From llvm/src/tools/clang:
find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}"
From llvm/src/tools/polly:
find test/ -name *.ll | xargs ./apply.sh
After that, check-all (with llvm, clang, clang-tools-extra, lld,
compiler-rt, and polly all checked out).
The extra 'rm' in the apply.sh script is due to a few files in clang's test
suite using interesting unicode stuff that my python script was throwing
exceptions on. None of those files needed to be migrated, so it seemed
sufficient to ignore those cases.
Reviewers: rafael, dexonsmith, grosser
Differential Revision: http://reviews.llvm.org/D7636
llvm-svn: 230786
The gold plugin never calls MaterializeModule, so any old debug info
was not deleted and could cause crashes.
Now that it is being "upgraded", the plugin also has to handle warnings
and create Modules with a nice id (it shows in the warning).
llvm-svn: 230655
GNU ld sets default, not hidden, visibility on local symbols.
Having default or hidden visibility on local symbols makes no difference in run-time behavior.
Patch by: H.J. Lu <hjl.tools@gmail.com>
llvm-svn: 229297
a gold binary explicitly. Substitute this binary into the tests rather
than just directly executing the 'ld' binary.
This should allow folks to inject a cross compiling gold binary, or in
my case to use a gold binary built and installed somewhere other than
/usr/bin/ld. It should also allow the tests to find 'ld.gold' so that
things work even if gold isn't the default on the system.
I've only stubbed out support in the makefile to preserve the existing
behavior with none of the fancy logic. If someone else wants to add
logic here, they're welcome to do so.
llvm-svn: 229251
Summary:
Move calls to get_input_file and release_input_file out of
getModuleForFile(). Otherwise release_input_file may end up
unmapping a view of the file while the view is still being
used by the Module (on 32-bit hosts).
Fix for PR22482.
Test Plan: Add test using --no-map-whole-files.
Reviewers: rafael, nlewycky
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D7539
llvm-svn: 228842
This can happen if:
* It is present in a comdat in one file.
* It is not present in the comdat of the file that is kept.
* Is is not used.
This should fix the LTO boostrap.
Thanks to Takumi NAKAMURA for setting up the bot!
llvm-svn: 225983
In order to make comdats always explicit in the IR, we decided to make
the syntax a bit more compact for the case of a GlobalObject in a
comdat with the same name.
Just dropping the $name causes problems for
@foo = globabl i32 0, comdat
$bar = comdat ...
and
declare void @foo() comdat
$bar = comdat ...
So the syntax is changed to
@g1 = globabl i32 0, comdat($c1)
@g2 = globabl i32 0, comdat
and
declare void @foo() comdat($c1)
declare void @foo() comdat
llvm-svn: 225302
This allows it to work with non trivial manglings like the one in COFF.
Amusingly, this can be tested with gold, as emit-llvm causes the plugin to
exit before any COFF is generated.
llvm-svn: 223790
The also-emit-llvm option only supported getting the IR before optimizations.
This patch replaces it with a more generic save-temps option that saves the IR
both before and after optimizations.
llvm-svn: 220885
The plugin API doesn't have the notion of linkonce, only weak. It is up to the
plugin to figure out if a symbol used only for the symbol table can be dropped.
In particular, it has to avoid dropping a linkonce_odr selected by gold if there
is also a weak_odr.
llvm-svn: 219188
The call to copyAttributesFrom will copy the visibility, which might assert
if it were to produce something invalid like "internal hidden". We avoid it
by first creating the replacement with the original linkage and then setting
it to internal affter the call to copyAttributesFrom.
llvm-svn: 219184
When creating an internal function replacement for use in an alias we were
not remapping the argument uses in the instructions to point to the new
arguments.
llvm-svn: 219177
This format is simply a regular object file with the bitcode stored in a
section named ".llvmbc", plus any number of other (non-allocated) sections.
One immediate use case for this is to accommodate compilation processes
which expect the object file to contain metadata in non-allocated sections,
such as the ".go_export" section used by some Go compilers [1], although I
imagine that in the future we could consider compiling parts of the module
(such as large non-inlinable functions) directly into the object file to
improve LTO efficiency.
[1] http://golang.org/doc/install/gccgo#Imports
Differential Revision: http://reviews.llvm.org/D4371
llvm-svn: 218078
This is the plugin version of pr20882.
This handles the case of every common symbol being in the IR. We will need some
support from gold to handle the case where some symbols are in ELF and some in
the IR.
llvm-svn: 217458
There are two parts to this. First, the plugin needs to tell gold the comdat by
setting comdat_key.
What gets things a bit more complicated is that gold only seems
symbols. In particular, if A is an alias to B, it only sees the symbols
A and B. It can then ask us to keep symbol A but drop symbol B. What
we have to do instead is to create an internal version of B and make A
an alias to that.
At some point some of this logic should be moved to lib/Linker so that
we don't map a Constant to an internal version just to have lib/Linker
map that again to the destination module.
The reason for implementing this in tools/gold for now is simplicity.
With it in place it should be possible to update clang to use comdats
for constructors and destructors on ELF without breaking the LTO
bootstrap. Once that is done I intend to come back and improve the
interface lib/Linker exposes.
llvm-svn: 216302
There is a fundamental difference between how the gold API and lib/LTO view
the LTO process.
The gold API talks about a particular symbol in a particular file. The lib/LTO
API talks about a symbol in the merged module.
The merged module is then defined in terms of the IR semantics. In particular,
a linkonce_odr GV is only copied if it is used, since it is valid to drop
unused linkonce_odr GVs.
In the testcase in pr19901 both properties collide. What happens is that gold
asks us to keep a particular linkonce_odr symbol, but the IR linker doesn't
copy it to the merged module and we never have a chance to ask lib/LTO to keep
it.
This patch fixes it by having a more direct implementation of the gold API. If
it asks us to keep a symbol, we change the linkage so it is not linkonce. If it
says we can drop a symbol, we do so. All of this before we even send the module
to lib/Linker.
Since now we don't have to produce LTO_SYMBOL_SCOPE_DEFAULT_CAN_BE_HIDDEN,
during symbol resolution we can use a temporary LLVMContext and do lazy
module loading. This allows us to keep the minimum possible amount of
allocated memory around. This should also allow as much parallelism as
we want, since there is no shared context.
llvm-svn: 216215
I initially thought I could implement COMDATs with aliases by just
internalizing GVs instead of dropping them. This is a counter
example: Internalizing one of the @a would make @b and @c point
to different variables.
llvm-svn: 215447
