This will address the issue: P8198 and P8199 (from D73534).
The methods was not handle bundles properly.
Differential Revision: https://reviews.llvm.org/D74904
Summary:
The following intrinsics are added:
* @llvm.aarch64.sve.ldff1.gather
* @llvm.aarch64.sve.ldff1.gather.index
* @llvm.aarch64.sve.ldff1.gather_sxtw
* @llvm.aarch64.sve.ldff1.gather.uxtw
* @llvm.aarch64.sve.ldff1.gather_sxtw.index
* @llvm.aarch64.sve.ldff1.gather.uxtw.index
* @llvm.aarch64.sve.ldff1.gather.scalar.offset
Although this patch is quite substantial, the vast majority of the
implementation is just a 'copy & paste' of the implementation of regular
gather loads, including tests. There's only a handful of new
definitions:
* AArch64ISD nodes defined in AArch64ISelLowering.h (e.g. GLDFF1)
* Seleciton DAG Types in AArch64SVEInstrInfo.td (e.g.
AArch64ldff1_gather)
* intrinsics in IntrinsicsAArch64.td (e.g. aarch64_sve_ldff1_gather)
* Pseudo instructions in SVEInstrFormats.td to workaround the issue of
use-before-def for the FFR register.
Reviewed By: sdesmalen
Differential Revision: https://reviews.llvm.org/D75128
-debug-only=inline-cost does not exist in optimized builds without
asserts and therefore the test fails for such configurations.
Related revision: c965fd942f1d2de6179cd1a2f78c78fa4bd74626
Under fp16 we optimise the bitcast between a VMOVhr and a CopyToReg via
custom lowering. This rewrites that to be a DAG combine instead, which
helps produce better code in the cases where the bitcast is actaully
legal.
Differential Revision: https://reviews.llvm.org/D72753
MC currently does not emit these relocation types, and lld does not
handle them. Add FKF_Constant as a work-around of some ARM code after
D72197. Eventually we probably should implement these relocation types.
By Fangrui Song!
Differential revision: https://reviews.llvm.org/D72892
Summary:
If the describeLoadedValue() hook produced a DIExpression when
describing a instruction, and it was not possible to emit a call site
entry directly (the value operand was not an immediate nor a preserved
register), then that described value could not be inserted into the
worklist, and would instead be dropped, meaning that the parameter's
call site value couldn't be described.
This patch extends the worklist so that each entry has an DIExpression
that is built up when iterating through the instructions.
This allows us to describe instruction chains like this:
$reg0 = mv $fp
$reg0 = add $reg0, offset
call @call_with_offseted_fp
Since DW_OP_LLVM_entry_value operations can't be combined with any other
expression, such call site entries will not be emitted. I have added a
test, dbgcall-site-expr-entry-value.mir, which verifies that we don't
assert or emit broken DWARF in such cases.
Reviewers: djtodoro, aprantl, vsk
Reviewed By: djtodoro, vsk
Subscribers: hiraditya, llvm-commits
Tags: #debug-info, #llvm
Differential Revision: https://reviews.llvm.org/D75036
Summary:
This is a preparatory patch for D75036, in which a debug expression is
associated with each parameter register in the worklist. In that patch
the two lambda functions addToWorklist() and finishCallSiteParams() grow
a bit, so move those out to separate functions. This patch also prepares
for each parameter register having their own expression moving the
creation of the DbgValueLoc into finishCallSiteParams().
Reviewers: djtodoro, vsk
Reviewed By: djtodoro, vsk
Subscribers: hiraditya, llvm-commits
Tags: #debug-info, #llvm
Differential Revision: https://reviews.llvm.org/D75050
In some cases Clang does not perform merging of instructions AND and TST (aka
ANDS xzr).
Example:
tst x2, x1
and x3, x2, x1
to:
ands x3, x2, x1
This patch add such merging during instruction selection: when AND is replaced
with ANDS instruction in LowerSELECT_CC, all users of AND also should be
changed for using this ANDS instruction
Short discussion on mailing list:
http://llvm.1065342.n5.nabble.com/llvm-dev-ARM-Peephole-optimization-instructions-tst-add-tp133109.html
Patch by Pavel Kosov.
Differential Revision: https://reviews.llvm.org/D71701
I added test cases that rely on the availability of the PPC target into
the general directory for the loop vectorizer. This causes failures on
bots that don't build the PPC target. Moving them to the PowerPC directory
to fix this.
A recent commit
(https://reviews.llvm.org/rG66c120f02560ef528a60924104ead66f330190f1) changed
the cost for calls to functions that have a vector version for some
vectorization factor. However, no check is performed for whether the
vectorization factor matches the current one being cost modeled. This leads to
attempts to widen call instructions to a vectorization factor for which such a
function does not exist, which in turn leads to an assertion failure.
This patch adds the check for vectorization factor (i.e. not just that the
called function has a vector version for some VF, but that it has a vector
version for this VF).
Differential revision: https://reviews.llvm.org/D74944
These tests generate two nodes that are identical except for the
metadata that indicates their exception behavior. The nodes get
CSEd by SelectionDAG, but the nofpexcept flag is being set based
only on the fpexcept.ignore node being created last.
We need to detect this case and intersect the flags similar to
what is already done with fast math flags.
Add extra diagnostics for the inline cost analysis under
-print-instruction-deltas cl option. When enabled along with
-debug-only=inline-cost it prints the IR of inline candidate
annotated with cost and threshold change per every instruction.
Reviewed By: apilipenko, davidxl, mtrofin
Differential Revision: https://reviews.llvm.org/D71501
Previously this code was called into two ways, either a FrameIndexSDNode
was passed in StackSlot. Or a load node was passed in the argument
called StackSlot. This was determined by a dyn_cast to FrameIndexSDNode.
In the case of a load, we had to go find the real pointer from
operand 0 and cast the node to MemSDNode to find the pointer info.
For the stack slot case, the code assumed that the stack slot
was perfectly aligned despite not being the creator of the slot.
This commit modifies the interface to make the caller responsible
for passing all of the required information to avoid all the
guess work and reverse engineering.
I'm not aware of any issues with the original code after an
earlier commit to fix the alignment of one of the stack objects.
This is just clean up to make the code less surprising.
This allows for diagnosing malformed LLVM IR debug info metadata such
as the one in the testcase.
<rdar://problem/59756060>
Differential Revision: https://reviews.llvm.org/D75212
Since all types <32b on gpr end up being assigned gpr32 regclasses, we can end
up with PHIs here which try to select between a gpr32 and an fpr16. Ideally RBS
shouldn't be selecting heterogenous regbanks for operands if possible, but we
still need to be able to deal with it here.
To fix this, if we have a gpr-bank operand < 32b in size and at least one other
operand is on the fpr bank, then we add cross-bank copies to homogenize the
operand banks. For simplicity the bank that we choose to settle on is whatever
bank the def operand has. For example:
%endbb:
%dst:gpr(s16) = G_PHI %in1:gpr(s16), %bb1, %in2:fpr(s16), %bb2
=>
%bb2:
...
%in2_copy:gpr(s16) = COPY %in2:fpr(s16)
...
%endbb:
%dst:gpr(s16) = G_PHI %in1:gpr(s16), %bb1, %in2_copy:gpr(s16), %bb2
Differential Revision: https://reviews.llvm.org/D75086
Summary:
Current LLVM code base does not use error handler with ErrorPolicy.
This patch removes ErrorPolicy from DWARFContext.
This patch is extracted from the D74308.
Reviewers: jhenderson, dblaikie, grimar, aprantl, JDevlieghere
Reviewed By: grimar
Subscribers: hiraditya, llvm-commits
Tags: #llvm, #debug-info
Differential Revision: https://reviews.llvm.org/D75118
Having this as it's own function helps to reduce indentation and allows use of return instead of wiring a value over the switch. A lambda would have also worked, but with slightly deeper nesting.
This patch fixes a bug that would cause dsymutil to collect
.swiftinterface files for the Swift stdlib and other SDK
modules. There is no advantage in copying these since they should be
loaded from the ones bundled with LLDB's embedded Swift compiler
instead and copying them will cause LLDB to recompile them from source
instead of loading their prebuilt cached counterparts in the SDK.
rdar://problem/57463247
Differential Revisions: https://reviews.llvm.org/D75196
Summary: ParsingInlineAsm was a misleading name. These values are only set for MS-style inline assembly.
Reviewed By: rnk
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D75198
As suggested in D75145 -
I'm not sure why, but several passes have this kind of disable/enable flag
implemented at the pass manager level. But that means we have to duplicate
the flag for both pass managers and add code to check the flag every time
the pass appears in the pipeline.
We want a debug option to see if this pass is misbehaving regardless of the
pass managers, so just add a disablement check at the single point before
any transforms run.
Differential Revision: https://reviews.llvm.org/D75204
CVP currently does not simplify cmps with instructions in the same
block, because LVI getPredicateAt() currently does not provide
much useful information for that case (D69686 would change that,
but is stuck.) However, if the instruction is a Phi node, then
LVI can compute the result of the predicate by threading it into
the predecessor blocks, which allows it simplify some conditions
that nothing else can handle. Relevant code:
6d6a4590c5/llvm/lib/Analysis/LazyValueInfo.cpp (L1904-L1927)
Differential Revision: https://reviews.llvm.org/D72169
This is a small pet peeve from me. This change makes sure the AVR backend uses
the correct private label prefix (.L) so that private labels are hidden in
avr-objdump.
Example code:
define i8 @foo(i1 %cond) {
br i1 %cond, label %then, label %else
then:
ret i8 3
else:
ret i8 5
}
When compiling this:
llc -march=avr -filetype=obj -o test.o test.ll
and then dumping it:
avr-objdump -d test.o
You would previously get an ugly temporary label:
00000000 <foo>:
0: 81 70 andi r24, 0x01 ; 1
2: 80 30 cpi r24, 0x00 ; 0
4: f9 f3 breq .-2 ; 0x4 <foo+0x4>
6: 83 e0 ldi r24, 0x03 ; 3
8: 08 95 ret
0000000a <LBB0_2>:
a: 85 e0 ldi r24, 0x05 ; 5
c: 08 95 ret
This patch fixes that, the output is now:
00000000 <foo>:
0: 81 70 andi r24, 0x01 ; 1
2: 80 30 cpi r24, 0x00 ; 0
4: 01 f0 breq .+0 ; 0x6 <foo+0x6>
6: 83 e0 ldi r24, 0x03 ; 3
8: 08 95 ret
a: 85 e0 ldi r24, 0x05 ; 5
c: 08 95 ret
Note that as you can see the breq operand is different. However it is
still the same after linking:
4: 11 f0 breq .+4
Differential Revision: https://reviews.llvm.org/D75124
Adjusting by 2 breaks DWARF output. With this fix, programs start to
compile and produce valid DWARF output.
Differential Revision: https://reviews.llvm.org/D74213
