This builds on some frame-lowering code that has existed since 2005 (r24224)
but was disabled in 2008 (r48188) because it needed base pointer support to
function correctly. This implementation follows the strategy suggested by Dale
Johannesen in r48188 where the following comment was added:
This does not currently work, because the delta between old and new stack
pointers is added to offsets that reference incoming parameters after the
prolog is generated, and the code that does that doesn't handle a variable
delta. You don't want to do that anyway; a better approach is to reserve
another register that retains to the incoming stack pointer, and reference
parameters relative to that.
And now we do exactly that. If we don't need a frame pointer, then we use r31
as a base pointer. If we do need a frame pointer, then we use r30 as a base
pointer. The base pointer retains the value of the stack pointer before it was
decremented in the prologue. We then use the base pointer to resolve all
negative frame indicies. The basic scheme follows that for base pointers in the
X86 backend.
We use a base pointer when we need to dynamically realign the incoming stack
pointer. This currently applies only to static objects (dynamic allocas with
large alignments, and base-pointer support in SjLj lowering will come in future
commits).
llvm-svn: 186478
This adds an instruction alias to make the assembler recognize the alternate literal form: pli [PC, #+/-<imm>]
See A8.8.129 in the ARM ARM (DDI 0406C.b).
Fixes <rdar://problem/14403733>.
llvm-svn: 186459
Use PMIN/PMAX for UGE/ULE vector comparions to reduce the number of required
instructions. This trick also works for UGT/ULT, but there is no advantage in
doing so. It wouldn't reduce the number of instructions and it would actually
reduce performance.
Reviewer: Ben
radar:5972691
llvm-svn: 186432
For safety, the inliner cannot decrease the allignment on an alloca when
merging it with another.
I've included two variants of the test case for this: one with DataLayout
available, and one without. When DataLayout is not available, if only one of
the allocas uses the default alignment (getAlignment() == 0), then they cannot
be safely merged.
llvm-svn: 186425
When truncating to a format with fewer mantissa bits, APFloat::convert
will perform a right shift of the mantissa by the difference of the
precision of the two formats. Usually, this will result in just the
mantissa bits needed for the target format.
One special situation is if the input number is denormal. In this case,
the right shift may discard significant bits. This is usually not a
problem, since truncating a denormal usually results in zero (underflow)
after normalization anyway, since the result format's exponent range is
usually smaller than the target format's.
However, there is one case where the latter property does not hold:
when truncating from ppc_fp128 to double. In particular, truncating
a ppc_fp128 whose first double of the pair is denormal should result
in just that first double, not zero. The current code however
performs an excessive right shift, resulting in lost result bits.
This is then caught in the APFloat::normalize call performed by
APFloat::convert and causes an assertion failure.
This patch checks for the scenario of truncating a denormal, and
attempts to (possibly partially) replace the initial mantissa
right shift by decrementing the exponent, if doing so will still
result in a valid *target format* exponent.
Index: test/CodeGen/PowerPC/pr16573.ll
===================================================================
--- test/CodeGen/PowerPC/pr16573.ll (revision 0)
+++ test/CodeGen/PowerPC/pr16573.ll (revision 0)
@@ -0,0 +1,11 @@
+; RUN: llc < %s | FileCheck %s
+
+target triple = "powerpc64-unknown-linux-gnu"
+
+define double @test() {
+ %1 = fptrunc ppc_fp128 0xM818F2887B9295809800000000032D000 to double
+ ret double %1
+}
+
+; CHECK: .quad -9111018957755033591
+
Index: lib/Support/APFloat.cpp
===================================================================
--- lib/Support/APFloat.cpp (revision 185817)
+++ lib/Support/APFloat.cpp (working copy)
@@ -1956,6 +1956,23 @@
X86SpecialNan = true;
}
+ // If this is a truncation of a denormal number, and the target semantics
+ // has larger exponent range than the source semantics (this can happen
+ // when truncating from PowerPC double-double to double format), the
+ // right shift could lose result mantissa bits. Adjust exponent instead
+ // of performing excessive shift.
+ if (shift < 0 && isFiniteNonZero()) {
+ int exponentChange = significandMSB() + 1 - fromSemantics.precision;
+ if (exponent + exponentChange < toSemantics.minExponent)
+ exponentChange = toSemantics.minExponent - exponent;
+ if (exponentChange < shift)
+ exponentChange = shift;
+ if (exponentChange < 0) {
+ shift -= exponentChange;
+ exponent += exponentChange;
+ }
+ }
+
// If this is a truncation, perform the shift before we narrow the storage.
if (shift < 0 && (isFiniteNonZero() || category==fcNaN))
lostFraction = shiftRight(significandParts(), oldPartCount, -shift);
llvm-svn: 186409
Another patch in the series to make more use of R.SBG. This one extends
r186072 and r186073 to handle cases where the AND is inside the shift.
llvm-svn: 186399
This patch enables calls to __aeabi_idivmod when in EABI mode,
by using the remainder value returned on registers (R1),
enabled by the ARM triple "none-eabi". Note that Darwin and
GNUEABI triples will continue lowering on GNU style, that is,
using the stack for the remainder.
Still need to add SREM/UREM support fix for 64-bit lowering.
llvm-svn: 186390
llvm-ar is the only user of toWin32Time() (via setLastModificationAndAccessTime), and r186298 can be reverted.
It had been buggy since the initial commit.
FIXME: Could we rename {from|to}Win32Time as {from|to}Win32FILETIME in TimeValue?
llvm-svn: 186374
We can have a FrameSetup in one basic block and the matching FrameDestroy
in a different basic block when we have struct byval. In that case, SPAdj
is not zero at beginning of the basic block.
Modify PEI to correctly set SPAdj at beginning of each basic block using
DFS traversal. We used to assume SPAdj is 0 at beginning of each basic block.
PEI had an assert SPAdjCount || SPAdj == 0.
If we have a Destroy <n> followed by a Setup <m>, PEI will assert failure.
We can add an extra condition to make sure the pairs are matched:
The pairs start with a FrameSetup.
But since we are doing a much better job in the verifier, this patch removes
the check in PEI.
PR16393
llvm-svn: 186364
PPCInstrInfo::insertSelect and PPCInstrInfo::canInsertSelect were computing the
common subclass of the true and false inputs, and then selecting either the
32-bit or the 64-bit isel variant based on the result of calling
PPC::GPRCRegClass.hasSubClassEq(RC) and PPC::G8RCRegClass.hasSubClassEq(RC)
(where RC is the common subclass). Unfortunately, this is not quite right: if
we have something like this:
%vreg8<def> = SELECT_CC_I8 %vreg4<kill>, %vreg7<kill>, %vreg6<kill>, 76;
G8RC_and_G8RC_NOX0:%vreg8 CRRC:%vreg4 G8RC_NOX0:%vreg7,%vreg6
then the common subclass of G8RC_and_G8RC_NOX0 and G8RC_NOX0 is G8RC_NOX0, and
G8RC_NOX0 is not a subclass of G8RC (because it also contains the ZERO8
pseudo-register). As a result, we also need to check the common subclass
against GPRC_NOR0 and G8RC_NOX0 explicitly.
This had not been a problem for clients of insertSelect that called
canInsertSelect first (because it had a compensating mistake), but insertSelect
is also used by the PPC pseudo-instruction expander, and this error was causing
a problem in that context.
This problem was found by csmith.
llvm-svn: 186343
This is consistent with the ELF object writer.
Add some COFF tests that relocate against an alias.
Reviewers: espindola
Differential Revision: http://llvm-reviews.chandlerc.com/D1079
llvm-svn: 186341
There is a comment at the top of DAGTypeLegalizer::PerformExpensiveChecks
which, in part, says:
// Note that these invariants may not hold momentarily when processing a node:
// the node being processed may be put in a map before being marked Processed.
Unfortunately, this assert would be valid only if the above-mentioned invariant
held unconditionally. This was causing llc to assert when, in fact,
everything was fine.
Thanks to Richard Sandiford for investigating this issue!
Fixes PR16562.
llvm-svn: 186338
a bot.
This reverts the commit which introduced a new implementation of the
fancy SROA pass designed to reduce its overhead. I'll skip the huge
commit log here, refer to r186316 if you're looking for how this all
works and why it works that way.
llvm-svn: 186332
Joerg Sonnenberger tells me one can open a directory in freebsd. I will try
to centralize our calls to open so that we can handle O_BINARY in one place,
and will then handle this there too.
llvm-svn: 186317
different core implementation strategy.
Previously, SROA would build a relatively elaborate partitioning of an
alloca, associate uses with each partition, and then rewrite the uses of
each partition in an attempt to break apart the alloca into chunks that
could be promoted. This was very wasteful in terms of memory and compile
time because regardless of how complex the alloca or how much we're able
to do in breaking it up, all of the datastructure work to analyze the
partitioning was done up front.
The new implementation attempts to form partitions of the alloca lazily
and on the fly, rewriting the uses that make up that partition as it
goes. This has a few significant effects:
1) Much simpler data structures are used throughout.
2) No more double walk of the recursive use graph of the alloca, only
walk it once.
3) No more complex algorithms for associating a particular use with
a particular partition.
4) PHI and Select speculation is simplified and happens lazily.
5) More precise information is available about a specific use of the
alloca, removing the need for some side datastructures.
Ultimately, I think this is a much better implementation. It removes
about 300 lines of code, but arguably removes more like 500 considering
that some code grew in the process of being factored apart and cleaned
up for this all to work.
I've re-used as much of the old implementation as possible, which
includes the lion's share of code in the form of the rewriting logic.
The interesting new logic centers around how the uses of a partition are
sorted, and split into actual partitions.
Each instruction using a pointer derived from the alloca gets
a 'Partition' entry. This name is totally wrong, but I'll do a rename in
a follow-up commit as there is already enough churn here. The entry
describes the offset range accessed and the nature of the access. Once
we have all of these entries we sort them in a very specific way:
increasing order of begin offset, followed by whether they are
splittable uses (memcpy, etc), followed by the end offset or whatever.
Sorting by splittability is important as it simplifies the collection of
uses into a partition.
Once we have these uses sorted, we walk from the beginning to the end
building up a range of uses that form a partition of the alloca.
Overlapping unsplittable uses are merged into a single partition while
splittable uses are broken apart and carried from one partition to the
next. A partition is also introduced to bridge splittable uses between
the unsplittable regions when necessary.
I've looked at the performance PRs fairly closely. PR15471 no longer
will even load (the module is invalid). Not sure what is up there.
PR15412 improves by between 5% and 10%, however it is nearly impossible
to know what is holding it up as SROA (the entire pass) takes less time
than reading the IR for that test case. The analysis takes the same time
as running mem2reg on the final allocas. I suspect (without much
evidence) that the new implementation will scale much better however,
and it is just the small nature of the test cases that makes the changes
small and noisy. Either way, it is still simpler and cleaner I think.
llvm-svn: 186316
is executed within the same second as the inputs for the test are
checked out from the source tree, it will fail to update due to being
below the resolution of the 'mtime' test used.
Now, this may seem improbably to you... ok, maybe *really* improbable,
but consider a system which does distributed execution of tests by
shipping their inputs to another machine and runs them. That might cause
the mtime to be quite recent during the test run. ;]
Instead, create two files directly in the test (allowing all platforms
to see the problem) and add either a use of the 'touch' command that
forces one mtime to some time quite a bit in the past, or it sleeps for
just over a second to be outside of the precision window.
llvm-svn: 186282
This update was done with the following bash script:
find test/CodeGen -name "*.ll" | \
while read NAME; do
echo "$NAME"
if ! grep -q "^; *RUN: *llc.*debug" $NAME; then
TEMP=`mktemp -t temp`
cp $NAME $TEMP
sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \
while read FUNC; do
sed -i '' "s/;\(.*\)\([A-Za-z0-9_-]*\):\( *\)$FUNC: *\$/;\1\2-LABEL:\3$FUNC:/g" $TEMP
done
sed -i '' "s/;\(.*\)-LABEL-LABEL:/;\1-LABEL:/" $TEMP
sed -i '' "s/;\(.*\)-NEXT-LABEL:/;\1-NEXT:/" $TEMP
sed -i '' "s/;\(.*\)-NOT-LABEL:/;\1-NOT:/" $TEMP
sed -i '' "s/;\(.*\)-DAG-LABEL:/;\1-DAG:/" $TEMP
mv $TEMP $NAME
fi
done
llvm-svn: 186280
This conversion was done with the following bash script:
find test/Transforms -name "*.ll" | \
while read NAME; do
echo "$NAME"
if ! grep -q "^; *RUN: *llc" $NAME; then
TEMP=`mktemp -t temp`
cp $NAME $TEMP
sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \
while read FUNC; do
sed -i '' "s/;\(.*\)\([A-Za-z0-9_]*\):\( *\)define\([^@]*\)@$FUNC\([( ]*\)\$/;\1\2-LABEL:\3define\4@$FUNC(/g" $TEMP
done
mv $TEMP $NAME
fi
done
llvm-svn: 186269
This update was done with the following bash script:
find test/Transforms -name "*.ll" | \
while read NAME; do
echo "$NAME"
if ! grep -q "^; *RUN: *llc" $NAME; then
TEMP=`mktemp -t temp`
cp $NAME $TEMP
sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \
while read FUNC; do
sed -i '' "s/;\(.*\)\([A-Za-z0-9_]*\):\( *\)@$FUNC\([( ]*\)\$/;\1\2-LABEL:\3@$FUNC(/g" $TEMP
done
mv $TEMP $NAME
fi
done
llvm-svn: 186268
This was done with the following sed invocation to catch label lines demarking function boundaries:
sed -i '' "s/^;\( *\)\([A-Z0-9_]*\):\( *\)test\([A-Za-z0-9_-]*\):\( *\)$/;\1\2-LABEL:\3test\4:\5/g" test/CodeGen/*/*.ll
which was written conservatively to avoid false positives rather than false negatives. I scanned through all the changes and everything looks correct.
llvm-svn: 186258
If an outside loop user of the reduction value uses the header phi node we
cannot just reduce the vectorized phi value in the vector code epilog because
we would loose VF-1 reductions.
lp:
p = phi (0, lv)
lv = lv + 1
...
brcond , lp, outside
outside:
usr = add 0, p
(Say the loop iterates two times, the value of p coming out of the loop is one).
We cannot just transform this to:
vlp:
p = phi (<0,0>, lv)
lv = lv + <1,1>
..
brcond , lp, outside
outside:
p_reduced = p[0] + [1];
usr = add 0, p_reduced
(Because the original loop iterated two times the vectorized loop would iterate
one time, but p_reduced ends up being zero instead of one).
We would have to execute VF-1 iterations in the scalar remainder loop in such
cases. For now, just disable vectorization.
PR16522
llvm-svn: 186256
