Record internal state based on register units. This is often more
efficient as there are typically fewer register units to update
compared to iterating over all the aliases of a register.
Original patch by Matthias Braun, but I've been rebasing and fixing it
for almost 2 years and fixed a few bugs causing intermediate failures
to make this patch independent of the changes in
https://reviews.llvm.org/D52010.
Will make it easier to pass the pointer info and alignment
correctly to the loads/stores.
While there also make the i32 stores independent and use a token
factor to join before the load.
Debug entry values functionality provides debug information about
call sites and function parameters values at the call entry spot.
Condition for generating this type of information is
compiling with -g option and optimization level higher
than zero(-O0).
In ISEL phase, while lowering call instructions, collect info
about registers that forward arguments into following
function frame. We store such info into MachineFunction of
the caller function. This is used very late, when dumping DWARF
info about call site parameters.
The call site info is visible at MIR level, as callSites attribute
of MachineFunction. Also, when using unmodified parameter value
inside callee it could be described as DW_OP_entry_value expression.
To deal with callSites attribute, we should pass
-emit-call-site-info option to llc.
This patch enables functionality in clang frontend and adds
call site info generation support for MIPS targets
(mips, mipsel, mips64, mips64el).
Patch by Nikola Tesic
Differential Revision: https://reviews.llvm.org/D78105
We allocated a suitably aligned frame index so we know that all the values
have ABI alignment.
For MIPS this avoids using pair of lwl + lwr instructions instead of a
single lw. I found this when compiling CHERI pure capability code where
we can't use the lwl/lwr unaligned loads/stores and and were to falling
back to a byte load + shift + or sequence.
This should save a few instructions for MIPS and possibly other backends
that don't have fast unaligned loads/stores.
It also improves code generation for CodeGen/X86/pr34653.ll and
CodeGen/WebAssembly/offset.ll since they can now use aligned loads.
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D78999
SelectionDAGBuilder currently doesn't propagate the known alignment of
the sret parameter. This is inefficient for MIPS and highly inefficient for
our out-of-tree CHERI-extended MIPS since we don't have lwl/lwr so fall back
to byte loads for align == 1.
The code assumed that zero-extending the integer constant to the
designated alloc size would be fine even for BE targets, but that's not
the case as that pulls in zeros from the MSB side while we actually
expect the padding zeros to go after the LSB.
I've changed the codepath handling the constant integers to use the
store size for both small(er than u64) and big constants and then add
zero padding right after that.
Differential Revision: https://reviews.llvm.org/D78011
Follow-up of D78082 and D78590.
Otherwise, because xray_instr_map is now read-only, the absolute
relocation used for Sled.Function will cause a text relocation.
Summary:
The INLINEASM MIR instructions use immediate operands to encode the values of some operands.
The MachineInstr pretty printer function already handles those operands and prints human readable annotations instead of the immediates. This patch adds similar annotations to the output of the MIRPrinter, however uses the new MIROperandComment feature.
Reviewers: SjoerdMeijer, arsenm, efriedma
Reviewed By: arsenm
Subscribers: qcolombet, sdardis, jvesely, wdng, nhaehnle, hiraditya, jrtc27, atanasyan, kerbowa, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D78088
We generally only combine starting from users to defs in the artifact combiner,
but this doesn't catch cases where at the point of combining a G_UNMERGE we don't
yet have the opposite G_MERGE on input yet since we haven't legalized that far.
This change adds the users of a G_MERGE to the artifact combiner worklist if one
of the uses is a G_UNMERGE or G_TRUNC.
Differential Revision: https://reviews.llvm.org/D77931
Octeon branches (bbit0/bbit032/bbit1/bbit132) have an immediate operand,
so it is legal to have such replacement within
MipsBranchExpansion::replaceBranch().
According to the specification, a branch (e.g. bbit0 ) looks like:
bbit0 rs p offset // p is an immediate operand
if !rs<p> then branch
Without this patch, an assertion triggers in the method,
and the problem has been found in the real example.
Differential Revision: https://reviews.llvm.org/D76842
Summary:
Truncating the result of a merge means that most likely we could have done without merge in the first place and just used the input merge inputs directly. This can be done in three cases:
1. If the truncation result is smaller than the merge source, we can use the source in the trunc directly
2. If the sizes are the same, we can replace the register or use a copy
3. If the truncation size is a multiple of the merge source size, we can build a smaller merge
This gets rid of most of the larger, hard-to-legalize merges.
Reviewers: qcolombet, aditya_nandakumar, aemerson, paquette, arsenm, Petar.Avramovic
Reviewed By: arsenm
Subscribers: sdardis, jvesely, wdng, nhaehnle, rovka, jrtc27, atanasyan, kerbowa, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D75915
The new behavior matches GNU objdump. A pair of angle brackets makes tests slightly easier.
`.foo:` is not unique and thus cannot be used in a `CHECK-LABEL:` directive.
Without `-LABEL`, the CHECK line can match the `Disassembly of section`
line and causes the next `CHECK-NEXT:` to fail.
```
Disassembly of section .foo:
0000000000001634 .foo:
```
Bdragon: <> has metalinguistic connotation. it just "feels right"
Reviewed By: rupprecht
Differential Revision: https://reviews.llvm.org/D75713
Custom legalize non-power-of-2 and unaligned load and store for MIPS32r5
and older, custom legalize non-power-of-2 load and store for MIPS32r6.
Don't attempt to combine non power of 2 loads or unaligned loads when
subtarget doesn't support them (MIPS32r5 and older).
Differential Revision: https://reviews.llvm.org/D74625
Improve legality checks for load and store, 4 byte scalar
load and store are now legal for all subtargets.
During regbank selection 4 byte unaligned loads and stores
for MIPS32r5 and older get mapped to gprb.
Select 4 byte unaligned loads and stores for MIPS32r5.
Fix tests that unintentionally had unaligned load or store.
Differential Revision: https://reviews.llvm.org/D74624
Consider large operands in G_MERGE_VALUES and G_UNMERGE_VALUES as
Ambiguous during regbank selection.
Introducing new InstType AmbiguousWithMergeOrUnmerge which will
allow us to recognize whether to narrow scalar or use s64:fprb.
This change exposed a bug when reusing data from TypeInfoForMF.
Thus when Instr is about to get destroyed (using narrow scalar)
clear its data in TypeInfoForMF. Internal data is saved based on
Instr's address, and it will no longer be valid.
Add detailed asserts for InstType and operand size.
Generate generic instructions instead of MIPS target instructions
during argument lowering and custom legalizer.
Select G_UNMERGE_VALUES and G_MERGE_VALUES when proper banks are
selected: {s32:gprb, s32:gprb, s64:fprb} for G_UNMERGE_VALUES and
{s64:fprb, s32:gprb, s32:gprb} for G_MERGE_VALUES.
Update tests. One improvement is when floating point argument in
gpr(or two gprs) gets passed to another function through gpr
unnecessary fpr-to-gpr moves are no longer generated.
Differential Revision: https://reviews.llvm.org/D74623
This reverts commit 80a34ae31125aa46dcad47162ba45b152aed968d with fixes.
Previously, since bots turning on EXPENSIVE_CHECKS are essentially turning on
MachineVerifierPass by default on X86 and the fact that
inline-asm-avx-v-constraint-32bit.ll and inline-asm-avx512vl-v-constraint-32bit.ll
are not expected to generate functioning machine code, this would go
down to `report_fatal_error` in MachineVerifierPass. Here passing
`-verify-machineinstrs=0` to make the intent explicit.
This reverts commit 80a34ae31125aa46dcad47162ba45b152aed968d with fixes.
On bots llvm-clang-x86_64-expensive-checks-ubuntu and
llvm-clang-x86_64-expensive-checks-debian only,
llc returns 0 for these two tests unexpectedly. I tweaked the RUN line a little
bit in the hope that LIT is the culprit since this change is not in the
codepath these tests are testing.
llvm\test\CodeGen\X86\inline-asm-avx-v-constraint-32bit.ll
llvm\test\CodeGen\X86\inline-asm-avx512vl-v-constraint-32bit.ll
This reverts commit rGcd5b308b828e, rGcd5b308b828e, rG8cedf0e2994c.
There are issues to be investigated for polly bots and bots turning on
EXPENSIVE_CHECKS.
New intrinisics are implemented for when we need to port SIMD code from other
arhitectures and only load or store portions of MSA registers.
Following intriniscs are added which only load/store element 0 of a vector:
v4i32 __builtin_msa_ldrq_w (const void *, imm_n2048_2044);
v2i64 __builtin_msa_ldr_d (const void *, imm_n4096_4088);
void __builtin_msa_strq_w (v4i32, void *, imm_n2048_2044);
void __builtin_msa_str_d (v2i64, void *, imm_n4096_4088);
Differential Revision: https://reviews.llvm.org/D73644
Printing floating point number in decimal is inconvenient for humans.
Verbose asm output will print out floating point values in comments, it
helps.
But in lots of cases, users still need additional work to covert the
decimal back to hex or binary to check the bit patterns,
especially when there are small precision difference.
Hexadecimal form is one of the supported form in LLVM IR, and easier for
debugging.
This patch try to print all FP constant in hex form instead.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D73566
G_CTPOP is generated from llvm.ctpop.<type> intrinsics, clang generates
these intrinsics from __builtin_popcount and __builtin_popcountll.
Add lower and narrow scalar for G_CTPOP.
Lower G_CTPOP for MIPS32.
Differential Revision: https://reviews.llvm.org/D73216
llvm.cttz.<type> intrinsic has additional i1 argument is_zero_undef,
it tells whether zero as the first argument produces a defined result.
G_CTTZ is generated from llvm.cttz.<type> (<type> <src>, i1 false)
intrinsics, clang generates these intrinsics from __builtin_ctz and
__builtin_ctzll.
G_CTTZ_ZERO_UNDEF comes from llvm.cttz.<type> (<type> <src>, i1 true).
Clang generates such intrinsics as parts of expansion of builtin_ffs
and builtin_ffsll. It is also traditionally part of and many
algorithms that are now predicated on avoiding zero-value inputs.
Add narrow scalar (algorithm uses G_CTTZ_ZERO_UNDEF) for G_CTTZ.
Lower G_CTTZ and G_CTTZ_ZERO_UNDEF for MIPS32.
Differential Revision: https://reviews.llvm.org/D73215
llvm.ctlz.<type> intrinsic has additional i1 argument is_zero_undef,
it tells whether zero as the first argument produces a defined result.
MIPS clz instruction returns 32 for zero input.
G_CTLZ is generated from llvm.ctlz.<type> (<type> <src>, i1 false)
intrinsics, clang generates these intrinsics from __builtin_clz and
__builtin_clzll.
G_CTLZ_ZERO_UNDEF can also be generated from llvm.ctlz with true as
second argument. It is also traditionally part of and many algorithms
that are now predicated on avoiding zero-value inputs.
Add narrow scalar for G_CTLZ (algorithm uses G_CTLZ_ZERO_UNDEF).
Lower G_CTLZ_ZERO_UNDEF and select G_CTLZ for MIPS32.
Differential Revision: https://reviews.llvm.org/D73214
The algorithm here only works if the sint_to_fp doesn't do any
rounding. Otherwise it can round before the offset fixup is
applied. Add an assert to protect this.
To avoid breaking the one test in tree that tested this code
with a set of types that fail the assert, I've enabled i32->f32
to use the i64->f32 algorithm. This only occurs when f64 isn't
a legal type. If f64 is legal then we do i32->f64->f32 instead.
Differential Revision: https://reviews.llvm.org/D72794
This was dropping the invariant metadata on dead argument loads, so
they weren't deleted.
Atomics still need to be fixed the same way. Also, apparently store
was never preserving dereferencable which should also be fixed.
Summary:
This patch could be treated as a rebase of D33960. It also fixes PR35547.
A fix for `llvm/test/Other/close-stderr.ll` is proposed in D68164. Seems
the consensus is that the test is passing by chance and I'm not
sure how important it is for us. So it is removed like in D33960 for now.
The rest of the test fixes are just adding `--crash` flag to `not` tool.
** The reason it fixes PR35547 is
`exit` does cleanup including calling class destructor whereas `abort`
does not do any cleanup. In multithreading environment such as ThinLTO or JIT,
threads may share states which mostly are ManagedStatic<>. If faulting thread
tearing down a class when another thread is using it, there are chances of
memory corruption. This is bad 1. It will stop error reporting like pretty
stack printer; 2. The memory corruption is distracting and nondeterministic in
terms of error message, and corruption type (depending one the timing, it
could be double free, heap free after use, etc.).
Reviewers: rnk, chandlerc, zturner, sepavloff, MaskRay, espindola
Reviewed By: rnk, MaskRay
Subscribers: wuzish, jholewinski, qcolombet, dschuff, jyknight, emaste, sdardis, nemanjai, jvesely, nhaehnle, sbc100, arichardson, jgravelle-google, aheejin, kbarton, fedor.sergeev, asb, rbar, johnrusso, simoncook, apazos, sabuasal, niosHD, jrtc27, zzheng, edward-jones, atanasyan, rogfer01, MartinMosbeck, brucehoult, the_o, PkmX, jocewei, jsji, lenary, s.egerton, pzheng, cfe-commits, MaskRay, filcab, davide, MatzeB, mehdi_amini, hiraditya, steven_wu, dexonsmith, rupprecht, seiya, llvm-commits
Tags: #llvm, #clang
Differential Revision: https://reviews.llvm.org/D67847
I believe the generated code here can suffer from double rounding.
So I wanted to capture the existing codegen so we can make
decisions about how to fix it.
The R_(MICRO)MIPS_JALR optimization only works when used against functions.
Using the relocation against a data symbol (e.g. function pointer) will
cause some linkers that don't ignore the hint in this case (e.g. LLD prior
to commit 5bab291b7b) to generate a relative branch to the data symbol
which crashes at run time. Before this patch, LLVM was erroneously emitting
these relocations against local-dynamic TLS function pointers and global
function pointers with internal visibility.
Reviewers: atanasyan, jrtc27, vstefanovic
Reviewed By: atanasyan
Differential Revision: https://reviews.llvm.org/D72571
As detailed in https://blog.regehr.org/archives/1709 we don't make use of the known leading/trailing zeros for shifted values in cases where we don't know the shift amount value.
This patch adds support to SelectionDAG::ComputeKnownBits to use KnownBits::countMinTrailingZeros and countMinLeadingZeros to set the minimum guaranteed leading/trailing known zero bits.
Differential Revision: https://reviews.llvm.org/D72573
Summary:
In commit b91f239485fb7bb8d29be3e0b60660a2de7570a9 I updated the
MipsDelaySlotFiller to skip BUNDLE instructions.
However, in addition to not considering BUNDLE instructions for the delay
slot, we also need to ensure that the register def-use information is
updated. Not updating this information caused run-time crashes (when using
the out-of-tree CHERI backend) since later definitions could be overwritten
with earlier register values.
Reviewers: atanasyan
Reviewed By: atanasyan
Differential Revision: https://reviews.llvm.org/D72254
G_BITREVERSE is generated from llvm.bitreverse.<type> intrinsics,
clang genrates these intrinsics from __builtin_bitreverse32 and
__builtin_bitreverse64.
Add lower and narrowscalar for G_BITREVERSE.
Lower G_BITREVERSE on MIPS32.
Recommit notes:
Introduce temporary variables in order to make sure
instructions get inserted into MachineFunction in same order
regardless of compiler used to build llvm.
Differential Revision: https://reviews.llvm.org/D71363
G_BITREVERSE is generated from llvm.bitreverse.<type> intrinsics,
clang genrates these intrinsics from __builtin_bitreverse32 and
__builtin_bitreverse64.
Add lower and narrowscalar for G_BITREVERSE.
Lower G_BITREVERSE on MIPS32.
Differential Revision: https://reviews.llvm.org/D71363
G_BSWAP is generated from llvm.bswap.<type> intrinsics, clang genrates
these intrinsics from __builtin_bswap32 and __builtin_bswap64.
Add lower and narrowscalar for G_BSWAP.
Lower G_BSWAP on MIPS32, select G_BSWAP on MIPS32 revision 2 and later.
Differential Revision: https://reviews.llvm.org/D71362
