Change the "recoverable" error callback to take an Error instaed of a
string.
Reviewed by: JDevlieghere
Differential Revision: https://reviews.llvm.org/D46831
llvm-svn: 332845
The idea is that a client that wants split dwarf would create a
specific kind of object writer that creates two files, and use it to
create the streamer.
Part of PR37466.
Differential Revision: https://reviews.llvm.org/D47050
llvm-svn: 332749
The print format was causing at least 2 unit-test failures from r331971.
The signed/unsigned comparison warnings only appeared to affect two lines but
it was unclear whether it might just pop up on other lines, so I have been
explicit in all the literals in the tests.
There were other bot unit-test failures that I am still investigating.
llvm-svn: 331978
Reviewed by: dblaikie, JDevlieghere, espindola
Differential Revision: https://reviews.llvm.org/D44560
Summary:
The .debug_line parser previously reported errors by printing to stderr and
return false. This is not particularly helpful for clients of the library code,
as it prevents them from handling the errors in a manner based on the calling
context. This change switches to using llvm::Error and callbacks to indicate
what problems were detected during parsing, and has updated clients to handle
the errors in a location-specific manner. In general, this means that they
continue to do the same thing to external users. Below, I have outlined what
the known behaviour changes are, relating to this change.
There are two levels of "errors" in the new error mechanism, to broadly
distinguish between different fail states of the parser, since not every
failure will prevent parsing of the unit, or of subsequent unit. Malformed
table errors that prevent reading the remainder of the table (reported by
returning them) and other minor issues representing problems with parsing that
do not prevent attempting to continue reading the table (reported by calling a
specified callback funciton). The only example of this currently is when the
last sequence of a unit is unterminated. However, I think it would be good to
change the handling of unrecognised opcodes to report as minor issues as well,
rather than just printing to the stream if --verbose is used (this would be a
subsequent change however).
I have substantially extended the DwarfGenerator to be able to handle
custom-crafted .debug_line sections, allowing for comprehensive unit-testing
of the parser code. For now, I am just adding unit tests to cover the basic
error reporting, and positive cases, and do not currently intend to test every
part of the parser, although the framework should be sufficient to do so at a
later point.
Known behaviour changes:
- The dump function in DWARFContext now does not attempt to read subsequent
tables when searching for a specific offset, if the unit length field of a
table before the specified offset is a reserved value.
- getOrParseLineTable now returns a useful Error if an invalid offset is
encountered, rather than simply a nullptr.
- The parse functions no longer use `WithColor::warning` directly to report
errors, allowing LLD to call its own warning function.
- The existing parse error messages have been updated to not specifically
include "warning" in their message, allowing consumers to determine what
severity the problem is.
- If the line table version field appears to have a value less than 2, an
informative error is returned, instead of just false.
- If the line table unit length field uses a reserved value, an informative
error is returned, instead of just false.
- Dumping of .debug_line.dwo sections is now implemented the same as regular
.debug_line sections.
- Verbose dumping of .debug_line[.dwo] sections now prints the prologue, if
there is a prologue error, just like non-verbose dumping.
As a helper for the generator code, I have re-added emitInt64 to the
AsmPrinter code. This previously existed, but was removed way back in r100296,
presumably because it was dead at the time.
This change also requires a change to LLD, which will be committed separately.
llvm-svn: 331971
See r331124 for how I made a list of files missing the include.
I then ran this Python script:
for f in open('filelist.txt'):
f = f.strip()
fl = open(f).readlines()
found = False
for i in xrange(len(fl)):
p = '#include "llvm/'
if not fl[i].startswith(p):
continue
if fl[i][len(p):] > 'Config':
fl.insert(i, '#include "llvm/Config/llvm-config.h"\n')
found = True
break
if not found:
print 'not found', f
else:
open(f, 'w').write(''.join(fl))
and then looked through everything with `svn diff | diffstat -l | xargs -n 1000 gvim -p`
and tried to fix include ordering and whatnot.
No intended behavior change.
llvm-svn: 331184
This patch adds the ability for the ObjectYAML DWARFEmitter to calculate
the lengths of DIEs. This is accomplished by creating a DIEFixupVisitor
class which traverses the DWARF DIEs to calculate and fix up the lengths
in the Compile Unit header.
The DIEFixupVisitor can be extended in the future to enable more complex
fix ups which will enable simplified YAML string representations.
This is also very useful when using the YAML format in unit tests
because you no longer need to know the length of the compile unit when
writing the YAML string.
Differential commandeered from Chris Bieneman (beanz)
Differential revision: https://reviews.llvm.org/D30666
llvm-svn: 330421
These aren't the .def style files used in LLVM that require a macro
defined before their inclusion - they're just basic non-modular includes
to stamp out command line flag variables.
llvm-svn: 329840
Summary:
This patch replaces the two switches which are deducing the size of
various forms with a single implementation. I have put the new
implementation into BinaryFormat, to avoid introducing dependencies
between the two independent libraries (DebugInfo and CodeGen) that need
this functionality.
Reviewers: aprantl, JDevlieghere, dblaikie
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D44418
llvm-svn: 327486
Whilst working on improvements to the error handling of the debug line
parsing code, I noticed that if an invalid offset were to be specified
in a call to getOrParseLineTable(), an entry in the LineTableMap would
still be created, even if the offset was not within the section range.
The immediate parsing attempt afterwards would fail (it would end up
getting a version of 0), and thereafter, any subsequent calls to
getOrParseLineTable or getLineTable would return the default-
constructed, invalid line table. In reality, we shouldn't even attempt
to parse this table, and we should always return a nullptr from these
two functions for this situation.
I have tested this via a unit test, which required some new framework
for unit testing debug line. My plan is to add quite a few more unit
tests for the new error reporting mechanism that will follow shortly,
hence the reason why the supporting code for the tests are written the
way they are - I intend to extend the DwarfGenerator class to support
generating debug line. At that point, I'll make sure that there are a
few positive test cases for this and the parsing code too.
Differential Revision: https://reviews.llvm.org/D44200
Reviewers: JDevlieghere, aprantl
llvm-svn: 326995
Currently it's not possible to access MCSubtargetInfo from a TgtMCAsmBackend.
D20830 threaded an MCSubtargetInfo reference through
MCAsmBackend::relaxInstruction, but this isn't the only function that would
benefit from access. This patch removes the Triple and CPUString arguments
from createMCAsmBackend and replaces them with MCSubtargetInfo.
This patch just changes the interface without making any intentional
functional changes. Once in, several cleanups are possible:
* Get rid of the awkward MCSubtargetInfo handling in ARMAsmBackend
* Support 16-bit instructions when valid in MipsAsmBackend::writeNopData
* Get rid of the CPU string parsing in X86AsmBackend and just use a SubtargetFeature for HasNopl
* Emit 16-bit nops in RISCVAsmBackend::writeNopData if the compressed instruction set extension is enabled (see D41221)
This change initially exposed PR35686, which has since been resolved in r321026.
Differential Revision: https://reviews.llvm.org/D41349
llvm-svn: 321692
Adds missing support for DW_FORM_data16.
Update of r320852/r320886, fixing the unittest again, this time use a
raw char string for the test data.
Differential Revision: https://reviews.llvm.org/D41090
llvm-svn: 321011
Adds missing support for DW_FORM_data16.
Update of r320852, fixing the unittest to use a hand-coded struct
instead of std::array to guarantee data layout.
Differential Revision: https://reviews.llvm.org/D41090
llvm-svn: 320886
We currently use target_link_libraries without an explicit scope
specifier (INTERFACE, PRIVATE or PUBLIC) when linking executables.
Dependencies added in this way apply to both the target and its
dependencies, i.e. they become part of the executable's link interface
and are transitive.
Transitive dependencies generally don't make sense for executables,
since you wouldn't normally be linking against an executable. This also
causes issues for generating install export files when using
LLVM_DISTRIBUTION_COMPONENTS. For example, clang has a lot of LLVM
library dependencies, which are currently added as interface
dependencies. If clang is in the distribution components but the LLVM
libraries it depends on aren't (which is a perfectly legitimate use case
if the LLVM libraries are being built static and there are therefore no
run-time dependencies on them), CMake will complain about the LLVM
libraries not being in export set when attempting to generate the
install export file for clang. This is reasonable behavior on CMake's
part, and the right thing is for LLVM's build system to explicitly use
PRIVATE dependencies for executables.
Unfortunately, CMake doesn't allow you to mix and match the keyword and
non-keyword target_link_libraries signatures for a single target; i.e.,
if a single call to target_link_libraries for a particular target uses
one of the INTERFACE, PRIVATE, or PUBLIC keywords, all other calls must
also be updated to use those keywords. This means we must do this change
in a single shot. I also fully expect to have missed some instances; I
tested by enabling all the projects in the monorepo (except dragonegg),
and configuring both with and without shared libraries, on both Darwin
and Linux, but I'm planning to rely on the buildbots for other
configurations (since it should be pretty easy to fix those).
Even after this change, we still have a lot of target_link_libraries
calls that don't specify a scope keyword, mostly for shared libraries.
I'm thinking about addressing those in a follow-up, but that's a
separate change IMO.
Differential Revision: https://reviews.llvm.org/D40823
llvm-svn: 319840
The previous implementation would only look 1 DW_AT_specification or DW_AT_abstract_origin deep. This means DWARFDie::getName() would fail in certain cases. I ran into such a case while creating a tool that used the LLVM DWARF parser to generate a symbolication format so I have seen this in the wild.
Differential Revision: https://reviews.llvm.org/D40156
llvm-svn: 319104
MCObjectStreamer owns its MCCodeEmitter -- this fixes the types to reflect that,
and allows us to remove the last instance of MCObjectStreamer's weird "holding
ownership via someone else's reference" trick.
llvm-svn: 315531
MCObjectStreamer owns its MCAsmBackend -- this fixes the types to reflect that,
and allows us to remove another instance of MCObjectStreamer's weird "holding
ownership via someone else's reference" trick.
llvm-svn: 315410
This patch makes the `.eh_frame` extension an alias for `.debug_frame`.
Up till now it was only possible to dump the section using objdump, but
not with dwarfdump. Since the two are essentially interchangeable, we
dump whichever of the two is present.
As a workaround, this patch also adds parsing for 3 currently
unimplemented CFA instructions: `DW_CFA_def_cfa_expression`,
`DW_CFA_expression`, and `DW_CFA_val_expression`. Because I lack the
required knowledge, I just parse the fields without actually creating
the instructions.
Finally, this also fixes the typo in the `.debug_frame` section name
which incorrectly contained a trailing `s`.
Differential revision: https://reviews.llvm.org/D37852
llvm-svn: 313530
This patch started as an attempt to rebase Greg's differential (D32821).
The result is both quite similar and different at the same time. It adds
the following checks:
- Verify that all address ranges in a DIE are valid.
- Verify that no ranges within the DIE overlap.
- Verify that no ranges overlap with the ranges of a sibling.
- Verify that children are completely contained in its (direct)
parent's address range. (unless both are subprograms)
Differential revision: https://reviews.llvm.org/D37696
llvm-svn: 313255
This patch started as an attempt to rebase Greg's differential (D32821).
The result is both quite similar and different at the same time. It adds
the following checks:
- Verify that all address ranges in a DIE are valid.
- Verify that no ranges within the DIE overlap.
- Verify that no ranges overlap with the ranges of a sibling.
- Verify that children are completely contained in its (direct)
parent's address range. (unless both are subprograms)
Differential revision: https://reviews.llvm.org/D37696
llvm-svn: 313250
This patch adds prologue verification, which is already present in
Apple's dwarfdump. It checks for invalid directory indices and warns
about duplicate file paths.
Differential revision: https://reviews.llvm.org/D37511
llvm-svn: 312782
I was surprised to see the code model being passed to MC. After all,
it assembles code, it doesn't create it.
The one place it is used is in the expansion of .cfi directives to
handle .eh_frame being more that 2gb away from the code.
As far as I can tell, gnu assembler doesn't even have an option to
enable this. Compiling a c file with gcc -mcmodel=large produces a
regular looking .eh_frame. This is probably because in practice linker
parse and recreate .eh_frames.
In llvm this is used because the JIT can place the code and .eh_frame
very far apart. Ideally we would fix the jit and delete this
option. This is hard.
Apart from confusion another problem with the current interface is
that most callers pass CodeModel::Default, which is bad since MC has
no way to map it to the target default if it actually needed to.
This patch then replaces the argument with a boolean with a default
value. The vast majority of users don't ever need to look at it. In
fact, only CodeGen and llvm-mc use it and llvm-mc just to enable more
testing.
llvm-svn: 309884
This changes DwarfContext to delegate to DwarfObject instead of having
pure virtual methods.
With this DwarfContextInMemory is replaced with an implementation of
DwarfObject that is local to a .cpp file.
llvm-svn: 308543
This fixes a cmake configuration issue when LLVM is configured with no targets.
Instead we need to add TestingSupport directly with target_link_libraries.
llvm-svn: 306842
Current implementation looks a bit confusing. It looks like it should
report/print something on error, but it does not do that.
It silently drops a error message when creating triple, though
this behavior is fine generally.
For example if LLVM configured with -DLLVM_TARGETS_TO_BUILD=ARM and
our host is windows, it is expected that we will be unable to
create "i386-pc-windows-msvc" target.
Patch introduces isConfigurationSupported() function that checks
if current configuration is supported for each test and returns early if not.
llvm-svn: 306812
Requires callers to directly associate relocations with a DataExtractor
used to read data from a DWARF section, which helps a callee not make
assumptions about which section it is reading.
This is the next step in reducing DWARFFormValue's dependence on DWARFUnit.
Differential Revision: https://reviews.llvm.org/D34704
llvm-svn: 306699
With fix in include folder character case:
#include "llvm/Codegen/AsmPrinter.h" -> #include "llvm/CodeGen/AsmPrinter.h"
Original commit message:
Change introduces error reporting policy for DWARFContextInMemory.
New callback provided by client is able to handle error on it's
side and return Halt or Continue.
That allows to either keep current behavior when parser prints all errors
but continues parsing object or implement something very different, like
stop parsing on a first error and report an error in a client style.
Differential revision: https://reviews.llvm.org/D34328
llvm-svn: 306517
Change introduces error reporting policy for DWARFContextInMemory.
New callback provided by client is able to handle error on it's
side and return Halt or Continue.
That allows to either keep current behavior when parser prints all errors
but continues parsing object or implement something very different, like
stop parsing on a first error and report an error in a client style.
Differential revision: https://reviews.llvm.org/D34328
llvm-svn: 306512
Some forms have sizes that depend on the DWARF version, DWARF format
(32/64-bit), or the size of an address. Collect these into a struct
to simplify passing them around. Require callers to provide one when
they query a form's size.
Differential Revision: http://reviews.llvm.org/D34570
llvm-svn: 306315
This creates a new library called BinaryFormat that has all of
the headers from llvm/Support containing structure and layout
definitions for various types of binary formats like dwarf, coff,
elf, etc as well as the code for identifying a file from its
magic.
Differential Revision: https://reviews.llvm.org/D33843
llvm-svn: 304864
clang-format (https://reviews.llvm.org/D33932) to keep primary headers
at the top and handle new utility headers like 'gmock' consistently with
other utility headers.
No other change was made. I did no manual edits, all of this is
clang-format.
This should allow other changes to have more clear and focused diffs,
and is especially motivated by moving some headers into more focused
libraries.
llvm-svn: 304786
