The ISD::STRICT_ nodes used to implement the constrained floating-point
intrinsics are currently never passed to the target back-end, which makes
it impossible to handle them correctly (e.g. mark instructions are depending
on a floating-point status and control register, or mark instructions as
possibly trapping).
This patch allows the target to use setOperationAction to switch the action
on ISD::STRICT_ nodes to Legal. If this is done, the SelectionDAG common code
will stop converting the STRICT nodes to regular floating-point nodes, but
instead pass the STRICT nodes to the target using normal SelectionDAG
matching rules.
To avoid having the back-end duplicate all the floating-point instruction
patterns to handle both strict and non-strict variants, we make the MI
codegen explicitly aware of the floating-point exceptions by introducing
two new concepts:
- A new MCID flag "mayRaiseFPException" that the target should set on any
instruction that possibly can raise FP exception according to the
architecture definition.
- A new MI flag FPExcept that CodeGen/SelectionDAG will set on any MI
instruction resulting from expansion of any constrained FP intrinsic.
Any MI instruction that is *both* marked as mayRaiseFPException *and*
FPExcept then needs to be considered as raising exceptions by MI-level
codegen (e.g. scheduling).
Setting those two new flags is straightforward. The mayRaiseFPException
flag is simply set via TableGen by marking all relevant instruction
patterns in the .td files.
The FPExcept flag is set in SDNodeFlags when creating the STRICT_ nodes
in the SelectionDAG, and gets inherited in the MachineSDNode nodes created
from it during instruction selection. The flag is then transfered to an
MIFlag when creating the MI from the MachineSDNode. This is handled just
like fast-math flags like no-nans are handled today.
This patch includes both common code changes required to implement the
new features, and the SystemZ implementation.
Reviewed By: andrew.w.kaylor
Differential Revision: https://reviews.llvm.org/D55506
llvm-svn: 362663
More or less all the instructions defined in the v8.2a full-fp16
extension are defined as UNPREDICTABLE if you put them in an IT block
(Thumb) or use with any condition other than AL (ARM). LLVM didn't
know that, and was happy to conditionalise them.
In order to force these instructions to count as not predicable, I had
to make a small Tablegen change. The code generation back end mostly
decides if an instruction was predicable by looking for something it
can identify as a predicate operand; there's an isPredicable bit flag
that overrides that check in the positive direction, but nothing that
overrides it in the negative direction.
(I considered the alternative approach of actually removing the
predicate operand from those instructions, but thought that it would
be more painful overall for instructions differing only in data type
to have different shapes of operand list. This way, the only code that
has to notice the difference is the if-converter.)
So I've added an isUnpredicable bit alongside isPredicable, and set
that bit on the right subset of FP16 instructions, and also on the
VSEL, VMAXNM/VMINNM and VRINT[ANPM] families which should be
unpredicable for all data types.
I've included a couple of representative regression tests, both of
which previously caused an fp16 instruction to be conditionalised in
ARM state and (with -arm-no-restrict-it) to be put in an IT block in
Thumb.
Reviewers: SjoerdMeijer, t.p.northover, efriedma
Reviewed By: efriedma
Subscribers: jdoerfert, javed.absar, kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D57823
llvm-svn: 354768
Summary:
While working on the GISel Combiner, I noticed I was producing location-less
error messages fairly often and set about fixing this. In the process, I
noticed quite a few places elsewhere in TableGen that also neglected to include
a relevant location.
This patch adds locations to errors that relate to a specific record (or a
field within it) and also have easy access to the relevant location. This is
particularly useful when multiclasses are involved as many of these errors
refer to the full name of a record and it's difficult to guess which substring
is grep-able.
Unfortunately, tablegen currently only supports Record granularity so it's not
currently possible to point at a specific Init so these sometimes point at the
record that caused the error rather than the precise origin of the error.
Reviewers: bogner, aditya_nandakumar, volkan, aemerson, paquette, nhaehnle
Reviewed By: nhaehnle
Subscribers: jdoerfert, nhaehnle, asb, rbar, johnrusso, simoncook, apazos, sabuasal, niosHD, jrtc27, zzheng, edward-jones, rogfer01, MartinMosbeck, brucehoult, the_o, PkmX, jocewei, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D58077
llvm-svn: 353862
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
Currently, variadic operands on an MCInst are assumed to be uses,
because they come after the defs. However, this is not always the case,
for example the Arm/Thumb LDM instructions write to a variable number of
registers.
This adds a property of instruction definitions which can be used to
mark variadic operands as defs. This only affects MCInst, because
MachineInstruction already tracks use/def per operand in each instance
of the instruction, so can already represent this.
This property can then be checked in MCInstrDesc, allowing us to remove
some special cases in ARMAsmParser::isITBlockTerminator.
Differential revision: https://reviews.llvm.org/D54853
llvm-svn: 348114
There are quite strong constraints on how you can use the TIED_TO
constraint between MC operands, many of which are currently not
checked until compiler run time.
MachineVerifier enforces that operands can only be tied together in
pairs (no three-way ties), and MachineInstr::tieOperands enforces that
one of the tied operands must be an output operand (def) and the other
must be an input operand (use).
Now we check these at TableGen time, so that if you violate any of
them in a new instruction definition, you find out immediately,
instead of having to wait until you compile something that makes code
generation hit one of those assertions.
Also in this commit, all the error reports in ParseConstraint now
include the name and source location of the def where the problem
happened, so that if you do trigger any of these errors, it's easier
to find the part of your TableGen input where you made the mistake.
The trunk sources already build successfully with this additional
error check, so I think no in-tree target has any of these problems.
Reviewers: fhahn, lhames, nhaehnle, MatzeB
Reviewed By: MatzeB
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D53815
llvm-svn: 347743
Summary:
So far, `isReturn` property is used to mean both a return instruction
from a functon and the end of an EH scope, a scope that starts with a EH
scope entry BB and ends with a catchret or a cleanupret instruction.
Because WinEH uses funclets, all EH-scope-ending instructions are also
real return instruction from a function. But for wasm, they only serve
as the end marker of an EH scope but not a return instruction that
exits a function. This mismatch caused incorrect prolog and epilog
generation in wasm EH scopes. This patch fixes this.
This patch is in the same vein with rL333045, which splits
`MachineBasicBlock::isEHFuncletEntry` into `isEHFuncletEntry` and
`isEHScopeEntry`.
Reviewers: dschuff
Subscribers: sbc100, jgravelle-google, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D50653
llvm-svn: 340325
This patch adds support for AArch64 to cfi-verify.
This required three changes to cfi-verify. First, it generalizes checking if an instruction is a trap by adding a new isTrap flag to TableGen (and defining it for x86 and AArch64). Second, the code that ensures that the operand register is not clobbered between the CFI check and the indirect call needs to allow a single dereference (in x86 this happens as part of the jump instruction). Third, we needed to ensure that return instructions are not counted as indirect branches. Technically, returns are indirect branches and can be covered by CFI, but LLVM's forward-edge CFI does not protect them, and x86 does not consider them, so we keep that behavior.
In addition, we had to improve AArch64's code to evaluate the branch target of a MCInst to handle calls where the destination is not the first operand (which it often is not).
Differential Revision: https://reviews.llvm.org/D48836
llvm-svn: 337007
A TableGen instruction record usually contains a DAG pattern that will
describe the SelectionDAG operation that can be implemented by this
instruction. However, there will be cases where several different DAG
patterns can all be implemented by the same instruction. The way to
represent this today is to write additional patterns in the Pattern
(or usually Pat) class that map those extra DAG patterns to the
instruction. This usually also works fine.
However, I've noticed cases where the current setup seems to require
quite a bit of extra (and duplicated) text in the target .td files.
For example, in the SystemZ back-end, there are quite a number of
instructions that can implement an "add-with-overflow" operation.
The same instructions also need to be used to implement just plain
addition (simply ignoring the extra overflow output). The current
solution requires creating extra Pat pattern for every instruction,
duplicating the information about which particular add operands
map best to which particular instruction.
This patch enhances TableGen to support a new PatFrags class, which
can be used to encapsulate multiple alternative patterns that may
all match to the same instruction. It operates the same way as the
existing PatFrag class, except that it accepts a list of DAG patterns
to match instead of just a single one. As an example, we can now define
a PatFrags to match either an "add-with-overflow" or a regular add
operation:
def z_sadd : PatFrags<(ops node:$src1, node:$src2),
[(z_saddo node:$src1, node:$src2),
(add node:$src1, node:$src2)]>;
and then use this in the add instruction pattern:
defm AR : BinaryRRAndK<"ar", 0x1A, 0xB9F8, z_sadd, GR32, GR32>;
These SystemZ target changes are implemented here as well.
Note that PatFrag is now defined as a subclass of PatFrags, which
means that some users of internals of PatFrag need to be updated.
(E.g. instead of using PatFrag.Fragment you now need to use
!head(PatFrag.Fragments).)
The implementation is based on the following main ideas:
- InlinePatternFragments may now replace each original pattern
with several result patterns, not just one.
- parseInstructionPattern delays calling InlinePatternFragments
and InferAllTypes. Instead, it extracts a single DAG match
pattern from the main instruction pattern.
- Processing of the DAG match pattern part of the main instruction
pattern now shares most code with processing match patterns from
the Pattern class.
- Direct use of main instruction patterns in InferFromPattern and
EmitResultInstructionAsOperand is removed; everything now operates
solely on DAG match patterns.
Reviewed by: hfinkel
Differential Revision: https://reviews.llvm.org/D48545
llvm-svn: 336999
Allow a tied operand of a different operand class in InstAliases,
so that the operand can be printed (and added to the MC instruction)
as the appropriate register. For example, 'GPR64as32', which would
be printed/parsed as a 32bit register and should match a tied 64bit
register operand, where the former is a sub-register of the latter.
This patch also generalizes the constraint checking to an overrideable
method in MCTargetAsmParser, so that target asmparsers can specify
whether a given operand satisfies the tied register constraint.
Reviewers: olista01, rengolin, fhahn, SjoerdMeijer, samparker, dsanders, craig.topper
Reviewed By: fhahn
Differential Revision: https://reviews.llvm.org/D47714
llvm-svn: 334942
Unlike CodeGenInstruction, CodeGenInstAlias was flatting asm strings in its constructor. For instructions it was the users responsibility to flatten the string.
AsmMatcherEmitter didn't know this and treated them the same. This caused double flattening of InstAliases. This is mostly harmless unless the desired assembly string contains curly braces. The second flattening wouldn't know to ignore these and would remove the curly braces. And for variant 1 it would remove the contents of them as well.
To mitigate this, this patch makes removes the flattening from the CodeGenIntAlias constructor and modifies AsmWriterEmitter to account for the flattening not having been done.
llvm-svn: 334919
This property is needed in order to follow values movement between
registers. This property is used in TII to implement method that
returns true if simple copy like instruction is recognized, along
with source and destination machine operands.
Patch by Nikola Prica.
Differential Revision: https://reviews.llvm.org/D45204
llvm-svn: 333093
Some ISA's such as microMIPS32(R6) have instructions which are near identical
for code generation purposes, e.g. xor and xor16. These instructions take the
same value types for operands and return values, have the same
instruction predicates and map to the same ISD opcode. (These instructions do
differ by register classes.)
In such cases, the FastISel generator rejects the instruction definition.
This patch borrows the 'FastIselShouldIgnore' bit from rL129692 and enables
applying it to an instruction definition.
Reviewers: mcrosier
Differential Revision: https://reviews.llvm.org/D46953
llvm-svn: 332983
ptypeN is functionally the same as typeN except that it informs the
SelectionDAG importer that an operand should be treated as a pointer even
if it was written as iN. This is important for patterns that use iN instead
of iPTR to represent pointers. E.g.:
(set GPR64:$dst, (load GPR64:$addr))
Previously, this was handled as a hardcoded special case for the appropriate
operands to G_LOAD and G_STORE.
llvm-svn: 318574
This replaces TableGen's type inference to operate on parameterized
types instead of MVTs, and as a consequence, some interfaces have
changed:
- Uses of MVTs are replaced by ValueTypeByHwMode.
- EEVT::TypeSet is replaced by TypeSetByHwMode.
This affects the way that types and type sets are printed, and the
tests relying on that have been updated.
There are certain users of the inferred types outside of TableGen
itself, namely FastISel and GlobalISel. For those users, the way
that the types are accessed have changed. For typical scenarios,
these replacements can be used:
- TreePatternNode::getType(ResNo) -> getSimpleType(ResNo)
- TreePatternNode::hasTypeSet(ResNo) -> hasConcreteType(ResNo)
- TypeSet::isConcrete -> TypeSetByHwMode::isValueTypeByHwMode(false)
For more information, please refer to the review page.
Differential Revision: https://reviews.llvm.org/D31951
llvm-svn: 313271
This introduces a new flag that indicates that a specific instruction
will never be present when the MachineScheduler runs and therefore needs
no scheduling information.
This is in preparation for an upcoming commit which checks completeness
of a scheduling model when tablegen runs.
Differential Revision: http://reviews.llvm.org/D17728
llvm-svn: 262383
Summary:
This patch adds a reserve call to an expensive function
(`llvm::LoadIntrinsics`), and may fix a few other low hanging
performance fruit (I've put them in comments for now, so we can
discuss).
**Motivation:**
As I'm sure other developers do, when I build LLVM, I build the entire
project with the same config (`Debug`, `MinSizeRel`, `Release`, or
`RelWithDebInfo`). However, the `Debug` config also builds llvm-tblgen
in `Debug` mode. Later build steps that run llvm-tblgen then can
actually be the slowest steps in the entire build. Nobody likes slow
builds.
Reviewers: rnk, dblaikie
Differential Revision: http://reviews.llvm.org/D16832
Patch by Alexander G. Riccio
llvm-svn: 259683
For targets to add their own operand types as needed, as advertised in
Operand's comment, they need to be able to specify an alternate namespace
for OperandType names too. This matches the RegisterOperand class.
llvm-svn: 256299
If the type isn't trivially moveable emplace can skip a potentially
expensive move. It also saves a couple of characters.
Call sites were found with the ASTMatcher + some semi-automated cleanup.
memberCallExpr(
argumentCountIs(1), callee(methodDecl(hasName("push_back"))),
on(hasType(recordDecl(has(namedDecl(hasName("emplace_back")))))),
hasArgument(0, bindTemporaryExpr(
hasType(recordDecl(hasNonTrivialDestructor())),
has(constructExpr()))),
unless(isInTemplateInstantiation()))
No functional change intended.
llvm-svn: 238602
Gather and scatter instructions additionally write to one of the source operands - mask register.
In this case Gather has 2 destination values - the loaded value and the mask.
Till now we did not support code gen pattern for gather - the instruction was generated from
intrinsic only and machine node was hardcoded.
When we introduce the masked_gather node, we need to select instruction automatically,
in the standard way.
I added a flag "hasTwoExplicitDefs" that allows to handle 2 destination operands.
(Some code in the X86InstrFragmentsSIMD.td is commented out, just to split one big
patch in many small patches)
llvm-svn: 230471
This adds two new fields to the RegisterOperand TableGen class:
string OperandNamespace = "MCOI";
string OperandType = "OPERAND_REGISTER";
These fields can be used to specify a target specific operand type,
which will be stored in the OperandType member of the MCOperandInfo
object.
This can be useful for targets that need to store some extra information
about operands that cannot be expressed using the target independent
types. For example, in the R600 backend, there are operands which
can take either registers or immediates and it is convenient to be able
to specify this in the TableGen definitions.
llvm-svn: 225661
Clang's static analyzer found several potential cases of undefined
behavior, use of un-initialized values, and potentially null pointer
dereferences in tablegen, Support, MC, and ADT. This cleans them up
with specific assertions on the assumptions of the code.
llvm-svn: 224154
This patch adds a new property: isInsertSubreg and the related target hooks:
TargetIntrInfo::getInsertSubregInputs and
TargetInstrInfo::getInsertSubregLikeInputs to specify that a target specific
instruction is a (kind of) INSERT_SUBREG.
The approach is similar to r215394.
<rdar://problem/12702965>
llvm-svn: 216139
This patch adds a new property: isExtractSubreg and the related target hooks:
TargetIntrInfo::getExtractSubregInputs and
TargetInstrInfo::getExtractSubregLikeInputs to specify that a target specific
instruction is a (kind of) EXTRACT_SUBREG.
The approach is similar to r215394.
<rdar://problem/12702965>
llvm-svn: 216130
This patch adds a new property: isRegSequence and the related target hooks:
TargetIntrInfo::getRegSequenceInputs and
TargetInstrInfo::getRegSequenceLikeInputs to specify that a target specific
instruction is a (kind of) REG_SEQUENCE.
<rdar://problem/12702965>
llvm-svn: 215394
Previously, TableGen assumed that every aliased operand consumed precisely 1
MachineInstr slot (this was reasonable because until a couple of days ago,
nothing more complicated was eligible for printing).
This allows a couple more ARM64 aliases to print so we can remove the special
code.
On the X86 side, I've gone for explicit AT&T size specifiers as the default, so
turned off a few of the aliases that would have just started printing.
llvm-svn: 208880
The 'Deprecated' class allows you to specify a SubtargetFeature that the
instruction is deprecated on.
The 'ComplexDeprecationPredicate' class allows you to define a custom
predicate that is called to check for deprecation.
For example:
ComplexDeprecationPredicate<"MCR">
would mean you would have to define the following function:
bool getMCRDeprecationInfo(MCInst &MI, MCSubtargetInfo &STI,
std::string &Info)
Which returns 'false' for not deprecated, and 'true' for deprecated
and store the warning message in 'Info'.
The MCTargetAsmParser constructor was chaned to take an extra argument of
the MCInstrInfo class, so out-of-tree targets will need to be changed.
llvm-svn: 190598
Back in the mists of time (2008), it seems TableGen couldn't handle the
patterns necessary to match ARM's CMOV node that we convert select operations
to, so we wrote a lot of fairly hairy C++ to do it for us.
TableGen can deal with it now: there were a few minor differences to CodeGen
(see tests), but nothing obviously worse that I could see, so we should
probably address anything that *does* come up in a localised manner.
llvm-svn: 188995
Most places can use PrintFatalError as the unwinding mechanism was not
used for anything other than printing the error. The single exception
was CodeGenDAGPatterns.cpp, where intermediate errors during type
resolution were ignored to simplify incremental platform development.
This use is replaced by an error flag in TreePattern and bailout earlier
in various places if it is set.
llvm-svn: 166712
Some of these dyn_cast<>'s would be better phrased as isa<> or cast<>.
That will happen in a future patch.
There are also two dyn_cast_or_null<>'s slipped in instead of
dyn_cast<>'s, since they were causing crashes with just dyn_cast<>.
llvm-svn: 165646
