1
0
mirror of https://github.com/RPCS3/llvm-mirror.git synced 2024-11-01 00:12:50 +01:00
Commit Graph

17 Commits

Author SHA1 Message Date
JF Bastien
cb60eaba94 Enable FastISel on ARM for Linux and NaCl, not MCJIT
This is a resubmit of r182877, which was reverted because it broken
MCJIT tests on ARM. The patch leaves MCJIT on ARM as it was before: only
enabled for iOS. I've CC'ed people from the original review and revert.

FastISel was only enabled for iOS ARM and Thumb2, this patch enables it
for ARM (not Thumb2) on Linux and NaCl, but not MCJIT.

Thumb2 support needs a bit more work, mainly around register class
restrictions.

The patch punts to SelectionDAG when doing TLS relocation on non-Darwin
targets. I will fix this and other FastISel-to-SelectionDAG failures in
a separate patch.

The patch also forces FastISel to retain frame pointers: iOS always
keeps them for backtracking (so emitted code won't change because of
this), but Linux was getting much worse code that was incorrect when
using big frames (such as test-suite's lencod). I'll also fix this in a
later patch, it will probably require a peephole so that FastISel
doesn't rematerialize frame pointers back-to-back.

The test changes are straightforward, similar to:
  http://lists.cs.uiuc.edu/pipermail/llvm-commits/Week-of-Mon-20130513/174279.html
They also add a vararg test that got dropped in that change.

I ran all of lnt test-suite on A15 hardware with --optimize-option=-O0
and all the tests pass. All the tests also pass on x86 make check-all. I
also re-ran the check-all tests that failed on ARM, and they all seem to
pass.

llvm-svn: 183966
2013-06-14 02:49:43 +00:00
JF Bastien
c950ffbe08 ARM FastISel integer sext/zext improvements
My recent ARM FastISel patch exposed this bug:
  http://llvm.org/bugs/show_bug.cgi?id=16178
The root cause is that it can't select integer sext/zext pre-ARMv6 and
asserts out.

The current integer sext/zext code doesn't handle other cases gracefully
either, so this patch makes it handle all sext and zext from i1/i8/i16
to i8/i16/i32, with and without ARMv6, both in Thumb and ARM mode. This
should fix the bug as well as make FastISel faster because it bails to
SelectionDAG less often. See fastisel-ext.patch for this.

fastisel-ext-tests.patch changes current tests to always use reg-imm AND
for 8-bit zext instead of UXTB. This simplifies code since it is
supported on ARMv4t and later, and at least on A15 both should perform
exactly the same (both have exec 1 uop 1, type I).

2013-05-31-char-shift-crash.ll is a bitcode version of the above bug
16178 repro.

fast-isel-ext.ll tests all sext/zext combinations that ARM FastISel
should now handle.

Note that my ARM FastISel enabling patch was reverted due to a separate
failure when dealing with MCJIT, I'll fix this second failure and then
turn FastISel on again for non-iOS ARM targets.

I've tested "make check-all" on my x86 box, and "lnt test-suite" on A15
hardware.

llvm-svn: 183551
2013-06-07 20:10:37 +00:00
Rafael Espindola
d23482285b Revert r182937 and r182877.
r182877 broke MCJIT tests on ARM and r182937 was working around another failure
by r182877.

This should make the ARM bots green.

llvm-svn: 182960
2013-05-30 20:37:52 +00:00
JF Bastien
235d8c9117 Enable FastISel on ARM for Linux and NaCl
FastISel was only enabled for iOS ARM and Thumb2, this patch enables it
for ARM (not Thumb2) on Linux and NaCl.

Thumb2 support needs a bit more work, mainly around register class
restrictions.

The patch punts to SelectionDAG when doing TLS relocation on non-Darwin
targets. I will fix this and other FastISel-to-SelectionDAG failures in
a separate patch.

The patch also forces FastISel to retain frame pointers: iOS always
keeps them for backtracking (so emitted code won't change because of
this), but Linux was getting much worse code that was incorrect when
using big frames (such as test-suite's lencod). I'll also fix this in a
later patch, it will probably require a peephole so that FastISel
doesn't rematerialize frame pointers back-to-back.

The test changes are straightforward, similar to:
  http://lists.cs.uiuc.edu/pipermail/llvm-commits/Week-of-Mon-20130513/174279.html
They also add a vararg test that got dropped in that change.

I ran all of test-suite on A15 hardware with --optimize-option=-O0 and
all the tests pass.

llvm-svn: 182877
2013-05-29 20:38:10 +00:00
Derek Schuff
812ee5bc7c Fix ARM FastISel tests, as a first step to enabling ARM FastISel
ARM FastISel is currently only enabled for iOS non-Thumb1, and I'm working on
enabling it for other targets. As a first step I've fixed some of the tests.
Changes to ARM FastISel tests:
- Different triples don't generate the same relocations (especially
  movw/movt versus constant pool loads). Use a regex to allow either.
- Mangling is different. Use a regex to allow either.
- The reserved registers are sometimes different, so registers get
  allocated in a different order. Capture the names only where this
  occurs.
- Add -verify-machineinstrs to some tests where it works. It doesn't
  work everywhere it should yet.
- Add -fast-isel-abort to many tests that didn't have it before.
- Split out the VarArg test from fast-isel-call.ll into its own
  test. This simplifies test setup because of --check-prefix.

Patch by JF Bastien

llvm-svn: 181801
2013-05-14 16:26:38 +00:00
Chad Rosier
bd6edf2054 [fast-isel] Add support for the expect intrinsic.
rdar://13370942

llvm-svn: 176649
2013-03-07 20:42:17 +00:00
Chad Rosier
5babcb4a4b Comment out the rdar number.
llvm-svn: 175460
2013-02-18 21:59:15 +00:00
Chad Rosier
81ced58e28 [fast-isel] Remove an invalid assert.
If the memcpy has an odd length with an alignment of 2, this would incorrectly
assert on the last 1 byte copy.
rdar://13202135

llvm-svn: 175459
2013-02-18 21:46:28 +00:00
Chad Rosier
c7e4217273 [arm fast-isel] Make the fast-isel implementation of memcpy respect alignment.
rdar://12821569

llvm-svn: 169460
2012-12-06 01:34:31 +00:00
Chad Rosier
9734752b2c [arm-fast-isel] Add support for -arm-long-calls.
Patch by Jush Lu <jush.msn@gmail.com>.

llvm-svn: 158368
2012-06-12 19:25:13 +00:00
Jakob Stoklund Olesen
71f92061aa Use getRegForValue() to materialize the address of ARM globals.
This enables basic local CSE, giving us 20% smaller code for
consumer-typeset in -O0 builds.

<rdar://problem/10658692>

llvm-svn: 147720
2012-01-07 04:07:22 +00:00
Jakob Stoklund Olesen
536b4e24d8 Use movw+movt in ARMFastISel::ARMMaterializeGV.
This eliminates a lot of constant pool entries for -O0 builds of code
with many global variable accesses.

This speeds up -O0 codegen of consumer-typeset by 2x because the
constant island pass no longer has to look at thousands of constant pool
entries.

<rdar://problem/10629774>

llvm-svn: 147712
2012-01-07 01:47:05 +00:00
Evan Cheng
46b085721a ARM target code clean up. Check for iOS, not Darwin where it makes sense.
llvm-svn: 146981
2011-12-20 18:26:50 +00:00
Chad Rosier
48b92815e0 Add support for inlining small memcpys.
rdar://10412592

llvm-svn: 144578
2011-11-14 22:46:17 +00:00
Chad Rosier
58ab241006 The order in which the predicate is added differs between Thumb and ARM mode. Fix predicate when in ARM mode and restore SelectIntrinsicCall.
llvm-svn: 144494
2011-11-13 09:44:21 +00:00
Chad Rosier
8cfccc356e Temporarily disable SelectIntrinsicCall when in ARM mode. This is causing failures.
llvm-svn: 144492
2011-11-13 05:14:43 +00:00
Chad Rosier
a2a0fbeded Add support in fast-isel for selecting memset/memcpy/memmove intrinsics.
llvm-svn: 144426
2011-11-11 23:31:03 +00:00