Summary:
Specifically, we transform
zext(2^K * (trunc X to iN)) to iM ->
2^K * (zext(trunc X to i{N-K}) to iM)<nuw>
This is helpful because pulling the 2^K out of the zext allows further
optimizations.
Reviewers: sanjoy
Subscribers: hiraditya, llvm-commits, timshen
Differential Revision: https://reviews.llvm.org/D48158
llvm-svn: 334737
Summary:
Previously we would do this simplification only if it did not introduce
any new truncs (excepting new truncs which replace other cast ops).
This change weakens this condition: If the number of truncs stays the
same, but we're able to transform trunc(X + Y) to X + trunc(Y), that's
still simpler, and it may open up additional transformations.
While we're here, also clean up some duplicated code.
Reviewers: sanjoy
Subscribers: hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D48160
llvm-svn: 334736
This reverts rL331412. We didn't up using fragment atoms
in the wasm object writer after all.
Differential Revision: https://reviews.llvm.org/D48173
llvm-svn: 334734
This test checks that a physical register is correctly allocated for the partial
write to register BX.
The ADD instruction has to wait for the write to RBX (and BX) before being
executed.
llvm-svn: 334730
To avoid redundant work, during DAG legalization we keep tables
mapping pre-legalized SDValues to post-legalized SDValues and a
SDValue-to-SDValue map to enable fast node replacements. However, as
the keys are nodes which may be reused it is possible that an entry in
a table refers to a now deleted node N (that should have been renamed
by the value replacement map) while a new node N' exists. If N' is
then replaced that entry would be wrong. Previously we avoided this by
when potentially violating this property, walking every table and
updating all node pointers. This is very expensive but hopefully rare
occurance.
This patch assigns each instance of a SDValue used in legalization a
unique id and uses these ids in the legalization tables. This avoids
any such aliasing issue, avoiding the full table search and allowing
more aggressive incremental table pruning.
In some cases this is a 1000x speedup to compilation.
Reviewers: jyknight, echristo, bogner, tra
Reviewed By: bogner
Subscribers: dberris, grandinj, hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D47959
llvm-svn: 334729
If WaitUntilReady is set to true then blockingLookup will return once all
requested symbols are ready. If WaitUntilReady is set to false then
blockingLookup will return as soon as all requested symbols have been
resolved. In the latter case, if any error occurs in finalizing the symbols it
will be reported to the ExecutionSession, rather than returned by
blockingLookup.
llvm-svn: 334722
In some cases, for example when compiling a preprocessed file, the
front-end is not able to provide an MD5 checksum for all files. When
that happens, omit the MD5 checksums from the final DWARF, because
DWARF doesn't have a way to indicate that some but not all files have
a checksum.
When assembling a .s file, and some but not all .file directives
provide an MD5 checksum, issue a warning and don't emit MD5 into the
DWARF.
Fixes PR37623.
Differential Revision: https://reviews.llvm.org/D48135
llvm-svn: 334710
This patches teaches EarlyCSE to figure out that if `and i1 %x, %y` is true then both
`%x` and `%y` are true in the taken branch, and if `or i1 %x, %y` is false then both
`%x` and `%y` are false in non-taken branch. Fix for PR37635.
Differential Revision: https://reviews.llvm.org/D47574
Reviewed By: reames
llvm-svn: 334707
Summary:
Do not convert a DbgDeclare to DbgValue if the store
instruction only refer to a fragment of the variable
described by the DbgDeclare.
Problem was seen when for example having an alloca for an
array or struct, and there were stores to individual elements.
In the past we inserted a DbgValue intrinsics for each store,
just as if the store wrote the whole variable.
When handling store instructions we insert a DbgValue that
indicates that the variable is "undefined", as we do not know
which part of the variable that is updated by the store.
When ConvertDebugDeclareToDebugValue is used with a load/phi
instruction we assert that the referenced value is large enough
to cover the whole variable. Afaict this should be true for all
scenarios where those methods are used on trunk. If the assert
blows in the future I guess we could simply skip to insert a
dbg.value instruction.
In the future I think we should examine which part of the variable
that is accessed, and add a DbgValue instrinsic with an appropriate
DW_OP_LLVM_fragment expression.
Reviewers: dblaikie, aprantl, rnk
Reviewed By: aprantl
Subscribers: JDevlieghere, llvm-commits
Tags: #debug-info
Differential Revision: https://reviews.llvm.org/D48024
llvm-svn: 334704
This is part of the work to cleanup use of 'alternate' ops so we can use the more general SK_Select shuffle type.
Only getSameOpcode calls getMainOpcode and much of the logic is repeated in both functions. This will require some reworking of D28907 but that patch has hit trouble and is unlikely to be completed anytime soon.
Differential Revision: https://reviews.llvm.org/D48120
llvm-svn: 334701
Summary:
Get rid of OpcodeName.
To remove the opcode name from an old file:
```
cat old_file | sed '/opcode_name.*/d'
```
Reviewers: gchatelet
Subscribers: tschuett, llvm-commits
Differential Revision: https://reviews.llvm.org/D48121
llvm-svn: 334691
Summary:
The tests in:
https://bugs.llvm.org/show_bug.cgi?id=37751
...show miscompiles because we wrongly mapped and folded x86-specific intrinsics into generic DAG nodes.
This patch corrects the mappings in X86IntrinsicsInfo.h and adds isel matching corresponding to the new patterns. The complete tests for the failure cases should be in avx-cvttp2si.ll and sse-cvttp2si.ll and avx512-cvttp2i.ll
Reviewers: RKSimon, gbedwell, spatel
Reviewed By: spatel
Subscribers: mcrosier, llvm-commits
Differential Revision: https://reviews.llvm.org/D47993
llvm-svn: 334685
Summary: This patch transforms the Scheduler class into the ExecuteStage. Most of the logic remains.
Reviewers: andreadb, RKSimon, courbet
Reviewed By: andreadb
Subscribers: mgorny, javed.absar, tschuett, gbedwell, llvm-commits
Differential Revision: https://reviews.llvm.org/D47246
llvm-svn: 334679
This is failing to compile when LLVM_ENABLE_THREADS is false,
and the fix is not immediately obvious, so reverting while I look
into it.
llvm-svn: 334658
When using clang --save-stats -mllvm -time-passes, both timers and stats
end up in the same json file.
We could end up with things like:
{
"asm-printer.EmittedInsts": 1,
"time.pass.Virtual Register Map.wall": 2.9015541076660156e-04,
"time.pass.Virtual Register Map.user": 2.0500000000000379e-04,
"time.pass.Virtual Register Map.sys": 8.5000000000001741e-05,
}
This patch makes use of the pass argument name (if available) in the
JSON key to end up with things like:
{
"asm-printer.EmittedInsts": 1,
"time.pass.virtregmap.wall": 2.9015541076660156e-04,
"time.pass.virtregmap.user": 2.0500000000000379e-04,
"time.pass.virtregmap.sys": 8.5000000000001741e-05,
}
This also helps avoiding to write another JSON printer to handle all the
cases that we could have in our pass names.
Fixed test instead of adding a new one originally from r334649.
Differential Revision: https://reviews.llvm.org/D48109
llvm-svn: 334657
Such globals are very likely to be part of a sorted section array, such
the .CRT sections used for dynamic initialization. The uses its own
sorted sections called ATL$__a, ATL$__m, and ATL$__z. Instead of special
casing them, just look for the dollar sign, which is what invokes linker
section sorting for COFF.
Avoids issues with ASan and the ATL uncovered after we started
instrumenting comdat globals on COFF.
llvm-svn: 334653
When using clang --save-stats -mllvm -time-passes, both timers and stats
end up in the same json file.
We could end up with things like:
{
"asm-printer.EmittedInsts": 1,
"time.pass.Virtual Register Map.wall": 2.9015541076660156e-04,
"time.pass.Virtual Register Map.user": 2.0500000000000379e-04,
"time.pass.Virtual Register Map.sys": 8.5000000000001741e-05,
}
This patch makes use of the pass argument name (if available) in the
JSON key to end up with things like:
{
"asm-printer.EmittedInsts": 1,
"time.pass.virtregmap.wall": 2.9015541076660156e-04,
"time.pass.virtregmap.user": 2.0500000000000379e-04,
"time.pass.virtregmap.sys": 8.5000000000001741e-05,
}
This also helps avoiding to write another JSON printer to handle all the
cases that we could have in our pass names.
Differential Revision: https://reviews.llvm.org/D48109
llvm-svn: 334649
Previously ThreadPool could only queue async "jobs", i.e. work
that was done for its side effects and not for its result. It's
useful occasionally to queue async work that returns a value.
From an API perspective, this is very intuitive. The previous
API just returned a shared_future<void>, so all we need to do is
make it return a shared_future<T>, where T is the type of value
that the operation returns.
Making this work required a little magic, but ultimately it's not
too bad. Instead of keeping a shared queue<packaged_task<void()>>
we just keep a shared queue<unique_ptr<TaskBase>>, where TaskBase
is a class with a pure virtual execute() method, then have a
templated derived class that stores a packaged_task<T()>. Everything
else works out pretty cleanly.
Differential Revision: https://reviews.llvm.org/D48115
llvm-svn: 334643
Returning optional is much safer.
The previous API had potential to cause use of undefined variables, if
the value passed by pointer was accidentally read afterwards.
Differential Revision: https://reviews.llvm.org/D48137
llvm-svn: 334634
Fixes PR37790.
In some (very rare) cases, the LSUnit (Load/Store unit) was wrongly marking a
load (or store) as "ready to execute" effectively bypassing older memory barrier
instructions.
To reproduce this bug, the memory barrier must be the first instruction in the
input assembly sequence, and it doesn't have to perform any register writes.
llvm-svn: 334633
