For describing section/symbol names we can use unique suffixes,
e.g:
```
- Name: '.foo [1]`
- Name: '.foo [2]`
```
It can be a problem (see https://reviews.llvm.org/D79984#inline-734829),
because `[]` are sometimes used to describe a macros:
```
- Name: "[[a0]]"
```
Seems the better approach is to use something else, like "()".
This patch does it and refactors the code related.
Differential revision: https://reviews.llvm.org/D80123
N_PEXT bit should not affect whether a symbol is considered to be external or not.
This also fixes the construction of the symbol table since it relies on the correct
ordering of symbols.
Test plan: make check-all
Differential revision: https://reviews.llvm.org/D78888
After SHF_ALLOC sections are ordered by LMA:
* If initial sections are empty, GNU objcopy skips their contents while we
emit leading zeros. (binary-paddr.test %t4)
* If trailing sections are empty, GNU objcopy skips their contents while we
emit trailing zeros. (binary-paddr.test %t5)
This patch matches GNU objcopy's behavior. Linkers don't keep p_memsz
PT_LOAD segments. Such empty sections would not have a containing
PT_LOAD and `Section::ParentSegment` might be null if linkers fail to
optimize the file offsets (lld D79254).
In particular, without D79254, the arm Linux kernel's multi_v5_defconfig
depends on this behavior: in `vmlinux`, an empty .text_itcm is mapped at
a very high address (0xfffe0000) but the kernel does not expect
`objcopy -O binary` to create a very large `arch/arm/boot/Image`
(0xfffe0000-0xc0000000 ~= 1GiB). See https://bugs.llvm.org/show_bug.cgi?id=45632
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D79229
The debug directory payload is not located directly after the
debug directory entry itself, but can essentially be located anywhere
in the binary (even outside of mapped sections, although we don't
handle that case).
Differential Revision: https://reviews.llvm.org/D78921
Fix handling of relocations with r_extern == 0.
If r_extern == 0 then r_symbolnum is an index of a section rather than a symbol index.
Patch by Seiya Nuta and Alexander Shaposhnikov.
Test plan: make check-all
Differential revision: https://reviews.llvm.org/D78946
Until recently yaml2obj didn't properly support relocations for MachO.
This behavior resulted in binaries having invalid relocations.
In this diff we adjust the existing tests as follows:
for the tests which don't actually look at any relocations they are removed,
for the tests which essentially depend on relocations they are fixed.
Test plan: make check-all
Differential revision: https://reviews.llvm.org/D78898
This diff fixes the calculation of the field vmsize
in LC_SEGMENT/LC_SEGMENT_64 load commands.
Test plan: make check-all
Differential revision: https://reviews.llvm.org/D78799
LC_LOAD_WEAK_DYLIB is analogous to LC_LOAD_DYLIB and doesn't require any special handling.
Test plan: make check-all
Differential revision: https://reviews.llvm.org/D78602
Make --remove-section clean up dead symbols, return an Error if it can't be safely done.
Test plan: make check-all
Differential revision: https://reviews.llvm.org/D78474
The `Offset` field is used to set the file offset of a program header.
In a normal object it should not be greater than the minimal offset
of sections included into segment.
This patch adds a check for that and adds tests.
Differential revision: https://reviews.llvm.org/D78304
Don't error on Config.KeepFileSymbols for COFF and Mach-O.
Original description:
GNU objcopy removes STT_FILE symbols for strip-debug operations, and
keeps them for --discard-all operation. Match their behaviour for
llvm-objcopy.
Bug: https://github.com/android/ndk/issues/1212
Differential Revision: https://reviews.llvm.org/D76675
There is no need to use `--check-prefix` multiple times.
It helps to improve readability/test maintainability.
This patch does it for all tools at once.
Differential revision: https://reviews.llvm.org/D78217
Imagine we have the following invocation:
`FileCheck -check-prefix=UNKNOWN-PREFIX -implicit-check-not=something`
When the check prefix does not exist it does not fail.
This patch fixes the issue.
Differential revision: https://reviews.llvm.org/D78024
llvm-readobj prints the file path as part of the output, so
--implicit-check-not patterns can accidentally match it. This patch
makes the test more robust by preventing failures if "foo" is in
somebody's path.
Reviewed by: grimar
Differential Revision: https://reviews.llvm.org/D77546
Debian and some other distributions install llvm-strip as llvm-strip-$major (e.g. `/usr/bin/llvm-strip-9`)
D54193 made it work with llvm-strip-$major but did not add a test.
The behavior was regressed by D69146.
Fixes https://github.com/ClangBuiltLinux/linux/issues/940
Reviewed By: alexshap
Differential Revision: https://reviews.llvm.org/D76562
A number of X86 tests were accidentally disabled in
https://reviews.llvm.org/D73568. This commit re-enables those tests.
```
$ for x86_test in $(gg 'REQUIRES: x86$' llvm/test | fst); do sed -i "" '/REQUIRES: x86/d' $x86_test; done
```
(Note that 'x86' is not an available feature, that's what caused the
tests to be disabled.)
Follow-up for D74433
What the function returns are almost standard BFD names, except that "ELF" is
in uppercase instead of lowercase.
This patch changes "ELF" to "elf" and changes ARM/AArch64 to use their BFD names.
MIPS and PPC64 have endianness differences as well, but this patch does not intend to address them.
Advantages:
* llvm-objdump: the "file format " line matches GNU objdump on ARM/AArch64 objects
* "file format " line can be extracted and fed into llvm-objcopy -O literally.
(https://github.com/ClangBuiltLinux/linux/issues/779 has such a use case)
Affected tools: llvm-readobj, llvm-objdump, llvm-dwarfdump, MCJIT (internal implementation detail, not exposed)
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D76046
`PAddr` corresponds to `p_paddr` of a program header, which is the segment's physical
address for systems in which physical addressing is relevant. `p_paddr` is often equal
to `p_vaddr`, which is the virtual address of a segment.
This patch changes the default for `PAddr` from 0 to a value of `VAddr`.
Differential revision: https://reviews.llvm.org/D76131
This changes the output of `llvm-readelf -n` from:
```
Displaying notes found at file offset 0x<...> with length 0x<...>:
```
to:
```
Displaying notes found in: .note.foo
```
And similarly, adds a `Name:` field to the `llvm-readobj -n` output for notes.
This change not only increases GNU compatibility, it also makes it much easier to read notes. Note that we still fall back to printing the file offset/length in cases where we don't have a section name, such as when printing notes in program headers or printing notes in a partially stripped file (GNU readelf does the same).
Fixes llvm.org/PR41339.
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D75647
empty-sections.test: add two tests adapted from @jhenderson's https://reviews.llvm.org/D74755#1882221
strip-non-alloc.test: improve. D74755 will change the attribution of an empty section.
They mostly test the behavior of Object.cpp:sectionWithinSegment : how we attribute sections to segments.
`ParentSegment` can affect some subtle layout decisions.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D74879
I've noticed that it is not convenient to create YAMLs from
binaries (using obj2yaml) that have to be test cases for obj2yaml
later (after applying yaml2obj).
The problem, for example is that obj2yaml emits "DynamicSymbols:"
key instead of .dynsym. It also does not create .dynstr.
And when a YAML document without explicitly defined .dynsym/.dynstr
is given to yaml2obj, we have issues:
1) These sections are placed after non-allocatable sections (I've fixed it in D74756).
2) They have VA == 0. User needs create descriptions for such sections explicitly manually
to set a VA.
This patch addresses (2). I suggest to let yaml2obj assign virtual addresses by itself.
It makes an output binary to be much closer to "normal" ELF.
(It is still possible to use "Address: 0x0" for a section to get the original behavior
if it is needed)
Differential revision: https://reviews.llvm.org/D74764
.dynsym and .dynstr are allocatable and therefore normally are placed
before non-allocatable .strtab, .shstrtab, .symtab sections.
But we are placing them after currently what creates a mix of
alloc/non-alloc sections and does not look normal.
Differential revision: https://reviews.llvm.org/D74756
Currently only supports simple copying, other operations to follow.
Reviewers: sbc100, alexshap, jhenderson
Differential Revision: https://reviews.llvm.org/D70930
This is a reland of a928d127a with a one-line fix to ensure that
the wasm version number is written as little-endian (it's the only
field in all of the binary format that's not a single byte or an
LEB, but we may have to watch out more when we start handling the
linking section).
Currently only supports simple copying, other operations to follow.
Reviewers: sbc100, alexshap, jhenderson
Differential Revision: https://reviews.llvm.org/D70930
To improve consistency and avoid unneeded shell feature (output
redirection).
While here, make other changes to improve consistency
--docnum 1 => --docnum=1
-docnum=x => --docnum=x
Our logic that dumped the flags was buggy.
For LLVM style it dumped SHF_MASKPROC/SHF_MASKOS named constants, though
they are not flags, but masks.
For GNU style it was just very inconsistent with GNU which has logic
that is not straightforward. Imagine we have sh_flags == 0x90000000.
SHF_EXCLUDE ("E") has a value of 0x80000000 and SHF_MASKPROC is 0xf0000000.
GNU readelf will not print "E" or "Ep" in this case, but will print just
"p". It only will print "E" when no other processor flag is set.
I had to investigate the GNU source to find the algorithm and now our logic should
match it.
Differential revision: https://reviews.llvm.org/D71462
.text sh_address=0x1000 sh_offset=0x1000
.data sh_address=0x3000 sh_offset=0x2000
In an objcopy -O binary output, the distance between two sections equal
their LMA differences (0x3000-0x1000), instead of their sh_offset
differences (0x2000-0x1000). This patch changes our behavior to match
GNU.
This rule gets more complex when the containing PT_LOAD has
p_vaddr!=p_paddr. GNU objcopy essentially computes
sh_offset-p_offset+p_paddr for each candidate section, and removes the
gap before the first address.
Added tests to binary-paddr.test to catch the compatibility problem.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D71035