The function stack poisioner conditionally stores local variables
either in an alloca or in malloc'ated memory, which has the
unfortunate side-effect, that the actual address of the variable is
only materialized when the variable is accessed, which means that
those variables are mostly invisible to the debugger even when
compiling without optimizations.
This patch stores the address of the local stack base into an alloca,
which can be referred to by the debug info and is available throughout
the function. This adds one extra pointer-sized alloca to each stack
frame (but mem2reg can optimize it away again when optimizations are
enabled, yielding roughly the same debug info quality as before in
optimized code).
rdar://problem/30433661
Differential Revision: https://reviews.llvm.org/D41034
llvm-svn: 320415
In more recent Linux kernels with 47 bit VMAs the layout of virtual memory
for powerpc64 changed causing the address sanitizer to not work properly. This
patch adds support for 47 bit VMA kernels for powerpc64 and fixes up test
cases.
https://reviews.llvm.org/D40907
There is an associated patch for compiler-rt.
Tested on several 4.x and 3.x kernel releases.
llvm-svn: 320109
As part of the unification of the debug format and the MIR format, print
MBB references as '%bb.5'.
The MIR printer prints the IR name of a MBB only for block definitions.
* find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)->getNumber\(\)/" << printMBBReference(*\1)/g'
* find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)\.getNumber\(\)/" << printMBBReference(\1)/g'
* find . \( -name "*.txt" -o -name "*.s" -o -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#([0-9]+)/%bb.\1/g'
* grep -nr 'BB#' and fix
Differential Revision: https://reviews.llvm.org/D40422
llvm-svn: 319665
Summary:
This change reverts r318575 and changes FindDynamicShadowStart() to
keep the memory range it found mapped PROT_NONE to make sure it is
not reused. We also skip MemoryRangeIsAvailable() check, because it
is (a) unnecessary, and (b) would fail anyway.
Reviewers: pcc, vitalybuka, kcc
Subscribers: srhines, kubamracek, mgorny, llvm-commits, hiraditya
Differential Revision: https://reviews.llvm.org/D40203
llvm-svn: 318666
Revert the following commits:
r318369 [asan] Fallback to non-ifunc dynamic shadow on android<22.
r318235 [asan] Prevent rematerialization of &__asan_shadow.
r317948 [sanitizer] Remove unnecessary attribute hidden.
r317943 [asan] Use dynamic shadow on 32-bit Android.
MemoryRangeIsAvailable() reads /proc/$PID/maps into an mmap-ed buffer
that may overlap with the address range that we plan to use for the
dynamic shadow mapping. This is causing random startup crashes.
llvm-svn: 318575
Add additional RUN clauses to test for -asan-mapping-scale=5 in
selective tests, with special CHECK statements where needed.
Differential Revision: https://reviews.llvm.org/D39775
llvm-svn: 318493
Fix a couple places where the minimum alignment/size should be a
function of the shadow granularity:
- alignment of AllGlobals
- the minimum left redzone size on the stack
Added a test to verify that the metadata_array is properly aligned
for shadow scale of 5, to be enabled when we add build support
for testing shadow scale of 5.
Differential Revision: https://reviews.llvm.org/D39470
llvm-svn: 318395
Summary:
In the mode when ASan shadow base is computed as the address of an
external global (__asan_shadow, currently on android/arm32 only),
regalloc prefers to rematerialize this value to save register spills.
Even in -Os. On arm32 it is rather expensive (2 loads + 1 constant
pool entry).
This changes adds an inline asm in the function prologue to suppress
this behavior. It reduces AsanTest binary size by 7%.
Reviewers: pcc, vitalybuka
Subscribers: aemerson, kristof.beyls, hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D40048
llvm-svn: 318235
Summary:
The following kernel change has moved ET_DYN base to 0x4000000 on arm32:
https://marc.info/?l=linux-kernel&m=149825162606848&w=2
Switch to dynamic shadow base to avoid such conflicts in the future.
Reserve shadow memory in an ifunc resolver, but don't use it in the instrumentation
until PR35221 is fixed. This will eventually let use save one load per function.
Reviewers: kcc
Subscribers: aemerson, srhines, kubamracek, kristof.beyls, hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D39393
llvm-svn: 317943
This change simplifies code that has to deal with
DIGlobalVariableExpression and mirrors how we treat DIExpressions in
debug info intrinsics. Before this change there were two ways of
representing empty expressions on globals, a nullptr and an empty
!DIExpression().
If someone needs to upgrade out-of-tree testcases:
perl -pi -e 's/(!DIGlobalVariableExpression\(var: ![0-9]*)\)/\1, expr: !DIExpression())/g' <MYTEST.ll>
will catch 95%.
llvm-svn: 312144
Summary:
Most DIExpressions are empty or very simple. When they are complex, they
tend to be unique, so checking them inline is reasonable.
This also avoids the need for CodeGen passes to append to the
llvm.dbg.mir named md node.
See also PR22780, for making DIExpression not be an MDNode.
Reviewers: aprantl, dexonsmith, dblaikie
Subscribers: qcolombet, javed.absar, eraman, hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D37075
llvm-svn: 311594
Summary:
Instrumentation to copy byval arguments is now correctly inserted
after the dynamic shadow base is loaded.
Reviewers: vitalybuka, eugenis
Reviewed By: vitalybuka
Subscribers: hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D36533
llvm-svn: 310503
Summary:
ASan determines the stack layout from alloca instructions. Since
arguments marked as "byval" do not have an explicit alloca instruction, ASan
does not produce red zones for them. This commit produces an explicit alloca
instruction and copies the byval argument into the allocated memory so that red
zones are produced.
Submitted on behalf of @morehouse (Matt Morehouse)
Reviewers: eugenis, vitalybuka
Reviewed By: eugenis
Subscribers: hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D34789
llvm-svn: 308387
Summary:
Add canary tests to verify that ASAN currently does nothing with the element atomic memory intrinsics for memcpy, memmove, and memset.
Placeholder tests that will fail once element atomic @llvm.mem[cpy|move|set] instrinsics have been added to the MemIntrinsic class hierarchy. These will act as a reminder to verify that ASAN handles these intrinsics properly once they have been added to that class hierarchy.
Reviewers: reames
Reviewed By: reames
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D35505
llvm-svn: 308248
Revert "Copy arguments passed by value into explicit allocas for ASan."
Revert "[asan] Add end-to-end tests for overflows of byval arguments."
Build failure on lldb-x86_64-ubuntu-14.04-buildserver.
Test failure on clang-cmake-aarch64-42vma and sanitizer-x86_64-linux-android.
llvm-svn: 307345
ASan determines the stack layout from alloca instructions. Since
arguments marked as "byval" do not have an explicit alloca instruction, ASan
does not produce red zones for them. This commit produces an explicit alloca
instruction and copies the byval argument into the allocated memory so that red
zones are produced.
Patch by Matt Morehouse.
Differential revision: https://reviews.llvm.org/D34789
llvm-svn: 307342
Use a combination of !associated, comdat, @llvm.compiler.used and
custom sections to allow dead stripping of globals and their asan
metadata. Sometimes.
Currently this works on LLD, which supports SHF_LINK_ORDER with
sh_link pointing to the associated section.
This also works on BFD, which seems to treat comdats as
all-or-nothing with respect to linker GC. There is a weird quirk
where the "first" global in each link is never GC-ed because of the
section symbols.
At this moment it does not work on Gold (as in the globals are never
stripped).
This is a second re-land of r298158. This time, this feature is
limited to -fdata-sections builds.
llvm-svn: 301587
When possible, put ASan ctor/dtor in comdat.
The only reason not to is global registration, which can be
TU-specific. This is not the case when there are no instrumented
globals. This is also limited to ELF targets, because MachO does
not have comdat, and COFF linkers may GC comdat constructors.
The benefit of this is a lot less __asan_init() calls: one per DSO
instead of one per TU. It's also necessary for the upcoming
gc-sections-for-globals change on Linux, where multiple references to
section start symbols trigger quadratic behaviour in gold linker.
This is a second re-land of r298756. This time with a flag to disable
the whole thing to avoid a bug in the gold linker:
https://sourceware.org/bugzilla/show_bug.cgi?id=19002
llvm-svn: 301586
The DWARF specification knows 3 kinds of non-empty simple location
descriptions:
1. Register location descriptions
- describe a variable in a register
- consist of only a DW_OP_reg
2. Memory location descriptions
- describe the address of a variable
3. Implicit location descriptions
- describe the value of a variable
- end with DW_OP_stack_value & friends
The existing DwarfExpression code is pretty much ignorant of these
restrictions. This used to not matter because we only emitted very
short expressions that we happened to get right by accident. This
patch makes DwarfExpression aware of the rules defined by the DWARF
standard and now chooses the right kind of location description for
each expression being emitted.
This would have been an NFC commit (for the existing testsuite) if not
for the way that clang describes captured block variables. Based on
how the previous code in LLVM emitted locations, DW_OP_deref
operations that should have come at the end of the expression are put
at its beginning. Fixing this means changing the semantics of
DIExpression, so this patch bumps the version number of DIExpression
and implements a bitcode upgrade.
There are two major changes in this patch:
I had to fix the semantics of dbg.declare for describing function
arguments. After this patch a dbg.declare always takes the *address*
of a variable as the first argument, even if the argument is not an
alloca.
When lowering a DBG_VALUE, the decision of whether to emit a register
location description or a memory location description depends on the
MachineLocation — register machine locations may get promoted to
memory locations based on their DIExpression. (Future) optimization
passes that want to salvage implicit debug location for variables may
do so by appending a DW_OP_stack_value. For example:
DBG_VALUE, [RBP-8] --> DW_OP_fbreg -8
DBG_VALUE, RAX --> DW_OP_reg0 +0
DBG_VALUE, RAX, DIExpression(DW_OP_deref) --> DW_OP_reg0 +0
All testcases that were modified were regenerated from clang. I also
added source-based testcases for each of these to the debuginfo-tests
repository over the last week to make sure that no synchronized bugs
slip in. The debuginfo-tests compile from source and run the debugger.
https://bugs.llvm.org/show_bug.cgi?id=32382
<rdar://problem/31205000>
Differential Revision: https://reviews.llvm.org/D31439
llvm-svn: 300522
Use a combination of !associated, comdat, @llvm.compiler.used and
custom sections to allow dead stripping of globals and their asan
metadata. Sometimes.
Currently this works on LLD, which supports SHF_LINK_ORDER with
sh_link pointing to the associated section.
This also works on BFD, which seems to treat comdats as
all-or-nothing with respect to linker GC. There is a weird quirk
where the "first" global in each link is never GC-ed because of the
section symbols.
At this moment it does not work on Gold (as in the globals are never
stripped).
This is a re-land of r298158 rebased on D31358. This time,
asan.module_ctor is put in a comdat as well to avoid quadratic
behavior in Gold.
llvm-svn: 299697
When possible, put ASan ctor/dtor in comdat.
The only reason not to is global registration, which can be
TU-specific. This is not the case when there are no instrumented
globals. This is also limited to ELF targets, because MachO does
not have comdat, and COFF linkers may GC comdat constructors.
The benefit of this is a lot less __asan_init() calls: one per DSO
instead of one per TU. It's also necessary for the upcoming
gc-sections-for-globals change on Linux, where multiple references to
section start symbols trigger quadratic behaviour in gold linker.
This is a rebase of r298756.
llvm-svn: 299696
Create the constructor in the module pass.
This in needed for the GC-friendly globals change, where the constructor can be
put in a comdat in some cases, but we don't know about that in the function
pass.
This is a rebase of r298731 which was reverted due to a false alarm.
llvm-svn: 299695
When possible, put ASan ctor/dtor in comdat.
The only reason not to is global registration, which can be
TU-specific. This is not the case when there are no instrumented
globals. This is also limited to ELF targets, because MachO does
not have comdat, and COFF linkers may GC comdat constructors.
The benefit of this is a lot less __asan_init() calls: one per DSO
instead of one per TU. It's also necessary for the upcoming
gc-sections-for-globals change on Linux, where multiple references to
section start symbols trigger quadratic behaviour in gold linker.
llvm-svn: 298756
Create the constructor in the module pass.
This in needed for the GC-friendly globals change, where the constructor can be
put in a comdat in some cases, but we don't know about that in the function
pass.
llvm-svn: 298731
Use a combination of !associated, comdat, @llvm.compiler.used and
custom sections to allow dead stripping of globals and their asan
metadata. Sometimes.
Currently this works on LLD, which supports SHF_LINK_ORDER with
sh_link pointing to the associated section.
This also works on BFD, which seems to treat comdats as
all-or-nothing with respect to linker GC. There is a weird quirk
where the "first" global in each link is never GC-ed because of the
section symbols.
At this moment it does not work on Gold (as in the globals are never
stripped).
Differential Revision: https://reviews.llvm.org/D30121
llvm-svn: 298158
They are register promoted by ISel and so it makes no sense to treat them as
memory.
Inserting calls to the thread sanitizer would also generate invalid IR.
You would hit:
"swifterror value can only be loaded and stored from, or as a swifterror
argument!"
llvm-svn: 295230
Other than on COFF with incremental linking, global metadata should
not need any extra alignment.
Differential Revision: https://reviews.llvm.org/D28628
llvm-svn: 291859
When using profiling and ASan together (-fprofile-instr-generate -fcoverage-mapping -fsanitize=address), at least on Darwin, the section of globals that ASan emits (__asan_globals) is misaligned and starts at an odd offset. This really doesn't have anything to do with profiling, but it triggers the issue because profiling emits a string section, which can have arbitrary size. This patch changes the alignment to sizeof(GlobalStruct).
Differential Revision: https://reviews.llvm.org/D28573
llvm-svn: 291715
This patch renumbers the metadata nodes in debug info testcases after
https://reviews.llvm.org/D26769. This is a separate patch because it
causes so much churn. This was implemented with a python script that
pipes the testcases through llvm-as - | llvm-dis - and then goes
through the original and new output side-by side to insert all
comments at a close-enough location.
Differential Revision: https://reviews.llvm.org/D27765
llvm-svn: 290292
This patch implements PR31013 by introducing a
DIGlobalVariableExpression that holds a pair of DIGlobalVariable and
DIExpression.
Currently, DIGlobalVariables holds a DIExpression. This is not the
best way to model this:
(1) The DIGlobalVariable should describe the source level variable,
not how to get to its location.
(2) It makes it unsafe/hard to update the expressions when we call
replaceExpression on the DIGLobalVariable.
(3) It makes it impossible to represent a global variable that is in
more than one location (e.g., a variable with multiple
DW_OP_LLVM_fragment-s). We also moved away from attaching the
DIExpression to DILocalVariable for the same reasons.
This reapplies r289902 with additional testcase upgrades and a change
to the Bitcode record for DIGlobalVariable, that makes upgrading the
old format unambiguous also for variables without DIExpressions.
<rdar://problem/29250149>
https://llvm.org/bugs/show_bug.cgi?id=31013
Differential Revision: https://reviews.llvm.org/D26769
llvm-svn: 290153
