Summary:
This patch enables the import of rules containing 'imm' operands that do not
constrain the acceptable values using predicates. Support for ImmLeaf will
arrive in a later patch.
Depends on D35681
Reviewers: ab, t.p.northover, qcolombet, rovka, aditya_nandakumar
Reviewed By: rovka
Subscribers: kristof.beyls, javed.absar, igorb, llvm-commits
Differential Revision: https://reviews.llvm.org/D35833
llvm-svn: 310343
Relanding after fixing UB issue with DefaultOffsets.
Consider the following instruction: "inst.eq $dst, $src" where ".eq"
is an optional flag operand. The $src and $dst operands are
registers. If we parse the instruction "inst r0, r1", the flag is not
present and it will be marked in the "OptionalOperandsMask" variable.
After the matching is complete we call the "convertToMCInst" method.
The current implementation works only if the optional operands are at
the end of the array. The "Operands" array looks like [token:"inst",
reg:r0, reg:r1]. The first operand that must be added to the MCInst
is the destination, the r0 register. The "OpIdx" (in the Operands
array) for this register is 2. However, since the flag is not present
in the Operands, the actual index for r0 should be 1. The flag is not
present since we rely on the default value.
This patch removes the "NumDefaults" variable and replaces it with an
array (DefaultsOffset). This array contains an index for each operand
(excluding the mnemonic). At each index, the array contains the
number of optional operands that should be subtracted. For the
previous example, this array looks like this: [0, 1, 1]. When we need
to access the r0 register, we compute its index as 2 -
DefaultsOffset[1] = 1.
Patch by Alexandru Guduleasa!
Reviewers: SamWot, nhaustov, niravd
Reviewed By: niravd
Subscribers: vitalybuka, llvm-commits
Differential Revision: https://reviews.llvm.org/D35998
llvm-svn: 310254
Multi-configuration CMake generators such as those for Visual Studio or Xcode do not
specify a build config at configure time, but let the user choose at build
time. In these cases binaries go into build/${Configuration}/bin rather than
build/bin. Prior to this commit, check-lit would fail when using multi-configuration
generators as it did not know how to resolve ${Configuration} in order
to find tools such as FileCheck. This commit teaches it to resolve
llvm_tools_dir within lit using the value specified with --param
build_mode.
Differential Revision: https://reviews.llvm.org/D36263
llvm-svn: 309967
Consider the following instruction: "inst.eq $dst, $src" where ".eq"
is an optional flag operand. The $src and $dst operands are
registers. If we parse the instruction "inst r0, r1", the flag is not
present and it will be marked in the "OptionalOperandsMask" variable.
After the matching is complete we call the "convertToMCInst" method.
The current implementation works only if the optional operands are at
the end of the array. The "Operands" array looks like [token:"inst",
reg:r0, reg:r1]. The first operand that must be added to the MCInst
is the destination, the r0 register. The "OpIdx" (in the Operands
array) for this register is 2. However, since the flag is not present
in the Operands, the actual index for r0 should be 1. The flag is not
present since we rely on the default value.
This patch removes the "NumDefaults" variable and replaces it with an
array (DefaultsOffset). This array contains an index for each operand
(excluding the mnemonic). At each index, the array contains the
number of optional operands that should be subtracted. For the
previous example, this array looks like this: [0, 1, 1]. When we need
to access the r0 register, we compute its index as 2 -
DefaultsOffset[1] = 1.
Patch by Alexandru Guduleasa!
Reviewers: SamWot, nhaustov, niravd
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D35998
llvm-svn: 309949
Summary:
We only need to merge memory operands for instructions that access
memory. This slightly reduces the number of actions executed.
Reviewers: MatzeB, rovka, dsanders
Reviewed By: dsanders
Subscribers: aemerson, igorb, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D36151
llvm-svn: 309944
Summary:
Fix a bug discovered in an out-of-tree target where memoperands from
pseudo-instructions that weren't part of the match were being merged into the
result instructions as part of GIR_MergeMemOperands.
This bug was caused by a change to the handling of State.MIs between rules when
the state machine tables were fused into a single table. Previously, each rule
would reset State.MIs using State.MIs.resize(1) but this is no longer done, as a
result stale data is occasionally left in some elements of State.MIs. Most
opcodes aren't affected by this but GIR_MergeMemOperands merges all memoperands
from the intructions recorded in State.MIs into the result instruction.
Suppose for example, we processed but rejected the following pattern:
(signextend (load x))
at this point, State.MIs contains the signextend and the load. Now suppose we
process and accept this pattern:
(add x, y)
at this point, State.MIs contains the add as well as the (now irrelevant) load.
When GIR_MergeMemOperands is processed, the memoperands from that irrelevant
load will be merged into the result instruction even though it was not part of
the match.
Bringing back the State.MIs.resize(1) would fix the problem but it would limit
our ability to optimize the table in the future. Instead, this patch fixes the
problem by explicitly stating which instructions should be merged into the result.
There's no direct test case in this commit because a test case would be very brittle.
However, at the time of writing this should fix the failures in
http://green.lab.llvm.org/green/job/Compiler_Verifiers_GlobalISEL/ as well as a
failure in test/CodeGen/ARM/GlobalISel/arm-isel.ll when expensive checks are enabled.
Reviewers: ab, t.p.northover, qcolombet, rovka, aditya_nandakumar
Subscribers: fhahn, kristof.beyls, igorb, llvm-commits
Differential Revision: https://reviews.llvm.org/D36094
llvm-svn: 309804
Summary:
This is an alternative solution to running the lit test suite on bots
without polluting the source directory. Each input test suite gets an
auto-generated site config in the build directory that points back to
the test input source directory.
This adds some cmake comlexity, but now we don't need to remove and
re-copy the test input directory before every test.
Reviewers: delcypher, modocache
Subscribers: mgorny, llvm-commits
Differential Revision: https://reviews.llvm.org/D36026
llvm-svn: 309602
Summary:
When outputing usage, emit here-document directly instead of
saving in a variable first -- avoids problem with bash 3.2.57 where an
unmatched ' in the here-document results in the following error:
./build_docker_image.sh: line 135: unexpected EOF while looking for matching `''
bash --version
GNU bash, version 3.2.57(1)-release (x86_64-apple-darwin16)
Differential Revision: https://reviews.llvm.org/D36064
llvm-svn: 309568
Traceback (most recent call last):
File "llvm/utils/lit/tests/Inputs/shtest-format/external_shell/write-bad-encoding.py", line 5, in <module>
sys.stdout.write(b"a line with bad encoding: \xc2.")
sys.stdout.write doesn't accept bytes but sys.stdout.buffer.write accepts.
llvm-svn: 309473
When I tried running the script, the ARM regex parser could not parse
my code. It failed because the .Lfunc_end line has a comment at the
end of it, so this commit removes the newline at the end of the regex.
Patch by Joel Galenson!
Differential Revision: https://reviews.llvm.org/D35641
llvm-svn: 309457
This should fix googletest-format test failures on the clang modules
buildbots, which have a stale copy of the OneTest script in the build
directory.
llvm-svn: 309432
When using win32 cmd.exe, turn off command echoing at the beginning of
the script (@echo off).
Replace a bash shell script with a python script for the
fail_with_bad_encoding test.
llvm-svn: 309399
Summary:
The technique of directly calling subprocess.Popen on a python script
doesn't work on Windows. The executable path of the command must refer
to a valid win32 executable.
Instead, rename all the python scripts masquerading as gtest executables
to have .py extensions, so we can easily detect then and call the python
executable for them. Do this on Linux as well as Windows for
consistency.
The test suite directory names also come out in lower-case on Windows.
We can consider removing that in a later patch. This change just updates
the FileCheck lines to match on Windows.
Fixes PR33933
Reviewers: modocache, mgorny
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D35909
llvm-svn: 309347
Summary:
Normally Python converts all newline characters, Windows or Unix,
to Unix newlines when opening a file. However, lit opens files in
binary mode, which does not perform this conversion. As a result,
trailing Windows newlines are not stripped from test input, which
caused a failure in the TestRunner unit test:
```
FAIL: test_custom (__main__.TestIntegratedTestKeywordParser)
----------------------------------------------------------------------
Traceback (most recent call last):
File "C:\Users\bgesiak\src\llvm\llvm\utils\lit\tests\unit\TestRunner.py", line 109, in test_custom
self.assertItemsEqual(value, ['a', 'b', 'c'])
AssertionError: Element counts were not equal:
First has 1, Second has 0: 'c\r'
First has 0, Second has 1: 'c'
```
Fix the discrepancy in behavior across the two platforms by
manually stripping Windows newlines before yielding each line in
the test file.
Reviewers: echristo, beanz, ddunbar, delcypher, rnk
Reviewed By: rnk
Subscribers: mehdi_amini, llvm-commits
Differential Revision: https://reviews.llvm.org/D27746
llvm-svn: 309312
Summary:
Depends on https://reviews.llvm.org/D35879.
This reverts rL257268, which in turn was a revert of rL257221.
https://reviews.llvm.org/D35879 marks the tests in the lit test suite
that fail on Windows as XFAIL, which should allow these tests to pass
on Windows-based buildbots.
Reviewers: delcypher, beanz, mgorny, jroelofs, rnk
Reviewed By: mgorny
Subscribers: rnk, ddunbar, george.karpenkov, llvm-commits
Differential Revision: https://reviews.llvm.org/D35880
llvm-svn: 309310
Summary:
An expectation in `utils/lit/tests/Inputs/shtest-shell/redirects.txt`
expects that first a string printed to stdout is seen, and then a
string printed to stderr. Add `flush()` calls to ensure that stdout is
printed before stderr, as expected.
Reviewers: rnk, mgorny, jroelofs
Reviewed By: rnk
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D35947
llvm-svn: 309292
Summary:
Now that we have control flow in place, fuse the per-rule tables into a
single table. This is a compile-time saving at this point. However, this will
also enable the optimization of a table so that similar instructions can be
tested together, reducing the time spent on the matching the code.
This is NFC in terms of externally visible behaviour but some internals have
changed slightly. State.MIs is no longer reset between each rule that is
attempted because it's not necessary to do so. As a consequence of this the
restriction on the order that instructions are added to State.MIs has been
relaxed to only affect recorded instructions that require new elements to be
added to the vector. GIM_RecordInsn can now write to any element from 1 to
State.MIs.size() instead of just State.MIs.size().
The compile-time regressions from the last commit were caused by the ARM target
including a non-const variable (zero_reg) in the table and therefore generating
an initializer for it. That variable is now const.
Reviewers: ab, t.p.northover, qcolombet, rovka, aditya_nandakumar
Reviewed By: rovka
Subscribers: kristof.beyls, igorb, llvm-commits
Differential Revision: https://reviews.llvm.org/D35681
llvm-svn: 309264
Rewrite the write-to-stderr.sh and write-to-stdout-and-stderr.sh shell
scripts as python scripts and call python on them.
Fixes PR33940
llvm-svn: 309200
This passes locally for me, which fails the overall lit test suite. I
can't debug a passing test, but I will try to help debug the test when
we get some failing logs.
llvm-svn: 309190
Summary:
rL257221 attempted to run lit's own test suite continuously, but that
commit was reverted because lit's test suite does not pass on Windows.
Because lit's tests do not run continuously, they often regress.
In order to un-revert rL257221, mark lit tests that fail as XFAIL for
Windows platforms.
Test Plan:
On a Windows development environment, follow the instructions in
utils/lit/README.txt to run lit's test suite:
```
utils/lit/lit.py \
--path /path/to/your/llvm/build/bin \
utils/lit/tests
```
Verify that the test suite is run and a successful exit code is
returned.
Reviewers: mgorny, rnk, delcypher, beanz
Reviewed By: rnk
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D35879
llvm-svn: 309123
Summary:
Whereas rL299560 and rL309071 call `parallelism_groups.items()`, under the
assumption that `parallelism_groups` is a `dict` type, the default
parameter for that attribute is a `list`. Change the default to a
`dict` for type correctness.
This regression in the unit tests would have been caught if the
unit tests were being run continously. It also would have been caught
if the lit project used a Python type checker such as `mypy`.
Test Plan:
As per the instructions in `utils/lit/README.txt`, run the lit unit
test suite:
```
utils/lit/lit.py \
--path /path/to/your/llvm/build/bin \
utils/lit/tests
```
Verify that the test `lit :: unit/TestRunner.py` fails before applying this
patch, but passes once this patch is applied.
Reviewers: mgorny, rnk, rafael
Reviewed By: mgorny
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D35878
llvm-svn: 309122
Summary:
This reverts rL306623, which removed `FileBasedTest`, an abstract base class,
but did not also remove the usages of that class in the lit unit tests.
The revert fixes four test failures in the lit unit test suite.
Test plan:
As per the instructions in `utils/lit/README.txt`, run the lit unit
test suite:
```
utils/lit/lit.py \
--path /path/to/your/llvm/build/bin \
utils/lit/tests
```
Verify that the following tests fail before applying this patch, and
pass once the patch is applied:
```
lit :: test-data.py
lit :: test-output.py
lit :: xunit-output.py
```
In addition, run `check-llvm` to make sure the existing LLVM test suite
executes normally.
Reviewers: george.karpenkov, mgorny, dlj
Reviewed By: mgorny
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D35877
llvm-svn: 309120
The ARM bots have started failing and while this patch should be an improvement
for these bots, it's also the only suspect in the blamelist. Reverting while
Diana and I investigate the problem.
llvm-svn: 309111
Summary:
Now that we have control flow in place, fuse the per-rule tables into a
single table. This is a compile-time saving at this point. However, this will
also enable the optimization of a table so that similar instructions can be
tested together, reducing the time spent on the matching the code.
This is NFC in terms of externally visible behaviour but some internals have
changed slightly. State.MIs is no longer reset between each rule that is
attempted because it's not necessary to do so. As a consequence of this the
restriction on the order that instructions are added to State.MIs has been
relaxed to only affect recorded instructions that require new elements to be
added to the vector. GIM_RecordInsn can now write to any element from 1 to
State.MIs.size() instead of just State.MIs.size().
Reviewers: ab, t.p.northover, qcolombet, rovka, aditya_nandakumar
Reviewed By: rovka
Subscribers: kristof.beyls, igorb, llvm-commits
Differential Revision: https://reviews.llvm.org/D35681
llvm-svn: 309094
Replace the incorrect variable reference when invalid redirect is used.
This fixes the following issue:
File "/usr/src/llvm/utils/lit/lit/TestRunner.py", line 316, in processRedirects
raise InternalShellError(cmd, "Unsupported redirect: %r" % (r,))
UnboundLocalError: local variable 'r' referenced before assignment
which in turn broke shtest-shell.py and max-failures.py lit tests.
The breakage was introduced during refactoring in rL307310.
Differential Revision: https://reviews.llvm.org/D35857
llvm-svn: 309044
Summary:
scudo_utils.cpp.o from compiler-rt has one of the host compiler's builtin
include paths stored in the .debug_line section. So we need to do
sed 's,Phase1,Phase2,g` on the Phase2 object file so it matches Phase3.
Reviewers: hans
Reviewed By: hans
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D34989
llvm-svn: 308912
Summary:
This will allow us to merge the various sub-tables into a single table. This is a
compile-time saving at this point. However, this will also enable the optimization
of a table so that similar instructions can be tested together, reducing the time
spent on the matching the code.
The bulk of this patch is a mechanical conversion to the new MatchTable object
which is responsible for tracking label definitions and filling in the index of
the jump targets. It is also responsible for nicely formatting the table.
This was necessary to support the new GIM_Try opcode which takes the index to
jump to if the match should fail. This value is unknown during table
construction and is filled in during emission. To support nesting try-blocks
(although we currently don't emit tables with nested try-blocks), GIM_Reject
has been re-introduced to explicitly exit a try-block or fail the overall match
if there are no active try-blocks.
Reviewers: ab, t.p.northover, qcolombet, rovka, aditya_nandakumar
Reviewed By: rovka
Subscribers: kristof.beyls, igorb, llvm-commits
Differential Revision: https://reviews.llvm.org/D35117
llvm-svn: 308596
Rename the enum value from X86_64_Win64 to plain Win64.
The symbol exposed in the textual IR is changed from 'x86_64_win64cc'
to 'win64cc', but the numeric value is kept, keeping support for
old bitcode.
Differential Revision: https://reviews.llvm.org/D34474
llvm-svn: 308208
One place compared with 32, which I've replaced with LaneBitmask::BitWidth.
The other places are shifts of a constant 1 by a lane number. But if LaneBitmask were to be a larger type than 32-bits like 64-bits, the 1 would need to be 1ULL to do a 64-bit shift. To hide this I've added a LanebitMask::getLane that hides the shift and make sures the 1 is casted to correct type first.
llvm-svn: 308042
Debugging LIT scripts can be rather painful, as LIT directly does not
specify which line has failed.
Rather, FileCheck is expected to report the failing location, but it can
be often ambiguous if multiple commands are tested against the same
prefix. This change adds a -vv option, which echoes all output.
Then detecting the error becomes straightforward: last printed line is
the failing one.
Of course, it could be desired to try to get failing line number
directly from bash, but it involves excessive hacks on older bash
versions (cf.
https://stackoverflow.com/questions/24398691/how-to-get-the-real-line-number-of-a-failing-bash-command)
Differential Revision: https://reviews.llvm.org/D35330
llvm-svn: 307938
Summary:
This speeds up the LLD test suite on Windows by 3x. Most of the time is
spent on lld/test/ELF/linkerscript/diagnostics.s, which repeatedly
constructs linker scripts with appending echo commands.
Reviewers: dlj, zturner, modocache
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D35093
llvm-svn: 307668
In each rule, each use of ComplexPattern is assigned an element in the Renderers
array. The matcher then collects renderer functions in this array and they are
used to render instructions. This works well for a single instruction but a
bug in the allocation mechanism causes the elements to be assigned on a
per-instruction basis rather than a per-rule basis.
So in the case of:
(set GPR32:$dst, (Op complex:$src1, complex:$src2))
tablegen currently assigns elements 0 and 1 to $src1 and $src2 respectively,
but for:
(set GPR32:$dst, (Op complex:$src1, (Op complex:$src2)))
it currently assigned both $src1 and $src2 the same element (0). This results in
one complex operand being rendered twice and the other being forgotten.
This patch corrects the allocation such that $src1 and $src2 are still allocated
different elements in this case.
llvm-svn: 307646
