Now that DataLayout is not a pass, store one in Module.
Since the C API expects to be able to get a char* to the datalayout description,
we have to keep a std::string somewhere. This patch keeps it in Module and also
uses it to represent modules without a DataLayout.
Once DataLayout is mandatory, we should probably move the string to DataLayout
itself since it won't be necessary anymore to represent the special case of a
module without a DataLayout.
llvm-svn: 202190
boundaries.
It is possible to create an ELF executable where symbol from say .text
section 'points' to the address outside the section boundaries. It does
not have a sense to disassemble something outside the section.
Without this fix llvm-objdump prints finite or infinite (depends on
the executable file architecture) number of 'invalid instruction
encoding' warnings.
llvm-svn: 202083
After this I will set the default back to F_None. The advantage is that
before this patch forgetting to set F_Binary would corrupt a file on windows.
Forgetting to set F_Text produces one that cannot be read in notepad, which
is a better failure mode :-)
llvm-svn: 202052
The LLVMSupport library implementation consolidates all dependencies on
system libraries. Move the logic gathering system libraries out of
'cmake/modules/LLVM-Config.cmake' and into 'lib/Support/CMakeLists.txt'.
Use the target_link_libraries() command there to tell CMake about the
link dependencies of the LLVMSupport implementation. CMake will
automatically propagate this to all targets that link LLVMSupport
directly or indirectly.
We still need to build knowledge of system library dependencies into
'llvm-config'. Store the list of libraries needed in a property on
LLVMSupport and teach 'tools/llvm-config/CMakeLists.txt' to retrieve it
from there.
Drop all calls to 'link_system_libs' and 'get_system_libs' from our
CMake code. Replace their implementations with a warning that explains
the calls are no longer necessary. Also drop from 'LLVMConfig.cmake'
the HAVE_* and related variables that were published there only to allow
'get_system_libs' to run outside our build process.
Contributed by Brad King.
llvm-svn: 201969
CodeGenPrepare uses extensively TargetLowering which is part of libLLVMCodeGen.
This is a layer violation which would introduce eventually a dependence on
CodeGen in ScalarOpts.
Move CodeGenPrepare into libLLVMCodeGen to avoid that.
Follow-up of <rdar://problem/15519855>
llvm-svn: 201912
This interface allows IRObjectFile to be implemented without having dummy
methods for all section and segment related methods.
Both llvm-ar and llvm-nm are changed to use it. Unfortunately the mangler is
still not plugged in since it requires some refactoring to make a Module hold
a DataLayout.
llvm-svn: 201881
This replaces the old NoIntegratedAssembler with at TargetOption. This is
more flexible and will be used to forward clang's -no-integrated-as option.
llvm-svn: 201836
The SuppressWarnings flag, unfortunately, isn't very useful for custom tools
that want to use the LLVM module linker. So I'm changing it to a parameter of
the Linker, and the flag itself moves to the llvm-link tool.
For the time being as SuppressWarnings is pretty much the only "option" it
seems reasonable to propagate it to Linker objects. If we end up with more
options in the future, some sort of "struct collecting options" may be a
better idea.
llvm-svn: 201819
The same code (~20 lines) for initializing a TargetOptions object from CodeGen
cmdline flags is duplicated 4 times in 4 different tools. This patch moves it
into a utility function.
Since the CodeGen/CommandFlags.h file defines cl::opt flags in a header, it's
a bit of a touchy situation because we should only link them into tools. So this
patch puts the init function in the header.
llvm-svn: 201699
Load Configuration Table may contain a pointer to SEH table. This patch is to
print the offset to the table. Printing SEH table contents is a TODO.
The layout of Layout Configuration Table is described in Microsoft PE/COFF
Object File Format Spec, but the table's offset/size descriptions seems to be
totally wrong, at least in revision 8.3 of the spec. I believe the table in
this patch is the correct one.
llvm-svn: 201638
In gcov, the -o flag can accept either a directory or a file name.
When given a directory, the gcda and gcno files are expected to be in
that directory. When given a file, the gcda and gcno files are
expected to be named based on the stem of that file. Non-existent
paths are treated as files.
This implements compatible behaviour.
llvm-svn: 201555
Introducing llvm-profdata, a tool for merging profile data generated by
PGO instrumentation in clang.
- The name indicates a file extension of <name>.profdata. Eventually
profile data output by clang should be changed to that extension.
- llvm-profdata merges two profiles. However, the name is more general,
since it will likely pick up more tasks (such as summarizing a single
profile).
- llvm-profdata parses the current text-based format, but will be
updated once we settle on a binary format.
<rdar://problem/15949645>
llvm-svn: 201535
This does exactly the same thing as for Win32, except it passes -m64 to
the compiler and the files go in a different directory.
Differential Revision: http://llvm-reviews.chandlerc.com/D2749
llvm-svn: 201269
These are self-contained in functionality so it makes sense to separate them,
as opt.cpp has grown quite big already.
Following Eric's suggestions, if this code is ever deemed useful outside of
tools/opt, it will make sense to move it to one of the LLVM libraries like IR.
llvm-svn: 201116
This function adds an extra path argument to lto_module_create_from_memory.
The path argument will be passed to makeBuffer to make sure the MemoryBuffer
has a name and the created module has a module identifier.
This is mainly for emitting warning messages from the linker. When we emit
warning message on a module, we can use the module identifier.
rdar://15985737
llvm-svn: 201114
In some cases it is possible to have a personality 0 unwinding opcodes in the
extab (such as when .handlerdata is used in the assembly). Simply decode the 3
opcodes for that case.
llvm-svn: 201030
The primary motivation for this pass is to separate the call graph
analysis used by the new pass manager's CGSCC pass management from the
existing call graph analysis pass. That analysis pass is (somewhat
unfortunately) over-constrained by the existing CallGraphSCCPassManager
requirements. Those requirements make it *really* hard to cleanly layer
the needed functionality for the new pass manager on top of the existing
analysis.
However, there are also a bunch of things that the pass manager would
specifically benefit from doing differently from the existing call graph
analysis, and this new implementation tries to address several of them:
- Be lazy about scanning function definitions. The existing pass eagerly
scans the entire module to build the initial graph. This new pass is
significantly more lazy, and I plan to push this even further to
maximize locality during CGSCC walks.
- Don't use a single synthetic node to partition functions with an
indirect call from functions whose address is taken. This node creates
a huge choke-point which would preclude good parallelization across
the fanout of the SCC graph when we got to the point of looking at
such changes to LLVM.
- Use a memory dense and lightweight representation of the call graph
rather than value handles and tracking call instructions. This will
require explicit update calls instead of some updates working
transparently, but should end up being significantly more efficient.
The explicit update calls ended up being needed in many cases for the
existing call graph so we don't really lose anything.
- Doesn't explicitly model SCCs and thus doesn't provide an "identity"
for an SCC which is stable across updates. This is essential for the
new pass manager to work correctly.
- Only form the graph necessary for traversing all of the functions in
an SCC friendly order. This is a much simpler graph structure and
should be more memory dense. It does limit the ways in which it is
appropriate to use this analysis. I wish I had a better name than
"call graph". I've commented extensively this aspect.
This is still very much a WIP, in fact it is really just the initial
bits. But it is about the fourth version of the initial bits that I've
implemented with each of the others running into really frustrating
problms. This looks like it will actually work and I'd like to split the
actual complexity across commits for the sake of my reviewers. =] The
rest of the implementation along with lots of wiring will follow
somewhat more rapidly now that there is a good path forward.
Naturally, this doesn't impact any of the existing optimizer. This code
is specific to the new pass manager.
A bunch of thanks are deserved for the various folks that have helped
with the design of this, especially Nick Lewycky who actually sat with
me to go through the fundamentals of the final version here.
llvm-svn: 200903
necessary until we add analyses to the driver, but I have such an
analysis ready and wanted to split this out. This is actually exercised
by the existing tests of the new pass manager as the analysis managers
are cross-checked and validated by the function and module managers.
llvm-svn: 200901
It is not clear how much we should try to expose in getFlags. For example,
should there be a SF_Object and a SF_Text?
But for information that is already being exposed, we may as well use it in
llvm-nm.
llvm-svn: 200820
No functional change. Updated loops from:
for (I = scc_begin(), E = scc_end(); I != E; ++I)
to:
for (I = scc_begin(); !I.isAtEnd(); ++I)
for teh win.
llvm-svn: 200789
Until now, when a path in a gcno file included a directory, we would
emit our .gcov file in that directory, whereas gcov always emits the
file in the current directory. In doing so, this implements gcov's
strange name-mangling -p flag, which is needed to avoid clobbering
files when two with the same name exist in different directories.
The path mangling is a bit ugly and only handles unix-like paths, but
it's simple, and it doesn't make any guesses as to how it should
behave outside of what gcov documents. If we decide this should be
cross platform later, we can consider the compatibility implications
then.
llvm-svn: 200754
When gcov is run without gcda data, it acts as if the counts are all
zero and labels the file as - to indicate that there was no data. We
should do the same.
llvm-svn: 200740
COFF has only one symbol table.
MachO has a LC_DYSYMTAB, but that is not a symbol table, just extra info about
the one symbol table (LC_SYMTAB).
IR (coming soon) also has only one table.
llvm-svn: 200488
utohexstr provides a temporary string, making it unsafe to use with the Twine
interface which will not copy the string. Switch to using std::string.
llvm-svn: 200457
exp2 is not available on Windows. Fortunately, we are calculating powers of 2
with expontents within the range of [4,12]. Simply use an equivalent bitshift
operation to repair compilation with MSVC which does not provide this standard
function.
llvm-svn: 200454
Enhance the ARM specific parsing support in llvm-readobj to support attributes.
This allows for simpler tests to validate encoding of the build attributes as
specified in the ARM ELF specification.
llvm-svn: 200450
None of the object file formats reported error on iterator increment. In
retrospect, that is not too surprising: no object format stores symbols or
sections in a linked list or other structure that requires chasing pointers.
As a consequence, all error checking can be done on begin() and end().
This reduces the text segment of bin/llvm-readobj in my machine from 521233 to
518526 bytes.
llvm-svn: 200442
This is a bit imperfect, as these options don't show up in the help as
is and single dash variants are accepted, which differs from gcov.
Unfortunately, this seems to be as good as it gets with the cl::opt
machinery, so it'll do as an incremental step.
llvm-svn: 200419
This Properly capitalizes and clarifies the help output from
llvm-cov. It also puts the llvm-only / non-gcov-compatible options in
their own category.
llvm-svn: 200418
Currently, llvm-cov isn't command-line compatible with gcov, which
accepts a source file name as its first parameter and infers the gcno
and gcda file names from that. This change keeps our -gcda and -gcno
options available for convenience in overriding this behaviour, but
adds the required parameter and inference behaviour as a compatible
default.
llvm-svn: 200417
That bit is not documented in the PE/COFF spec published by Microsoft, so we
don't know the official name of it. I named this bit
IMAGE_DLL_CHARACTERISTICS_HIGH_ENTROPY_VIRTUAL_ADDRESS because the bit is
reported as "high entropy virtual address" by dumpbin.exe,
llvm-svn: 200121
PE32+ supports 64 bit address space, but the file format remains 32 bit.
So its file format is pretty similar to PE32 (32 bit executable). The
differences compared to PE32 are (1) the lack of "BaseOfData" field and
(2) some of its data members are 64 bit.
In this patch, I added a new member function to get a PE32+ Header object to
COFFObjectFile class and made llvm-readobj to use it.
llvm-svn: 200117
This fixes a regression introduced by r182908, which broke
llvm-objdump's ability to display relocations inline in a disassembly
dump for ELF object files.
That change removed a SectionRelocMap from Object/ELF.h, which we
recreate in llvm-objdump.cpp.
I discovered this regression via an out-of-tree test
(test/NaCl/X86/pnacl-hides-sandbox-x86-64.ll) which used llvm-objdump.
Note that the "Unknown" string in the test output on i386 isn't quite
right, but this appears to be a pre-existing bug.
Differential Revision: http://llvm-reviews.chandlerc.com/D2559
llvm-svn: 200090
This enables IO error reports in both the child and server processes.
The scheme still isn't entirely satisfactory and output is jumbled but it beats
having no output at all. This will hopefully unblock ARM support (PR18057).
llvm-svn: 200017
Eliminates the LLI_BUILDING_CHILD build hack from r199885.
Also add a FIXME to remove code that tricks the tests into passing when the
feature fails to work. Please don't do stuff like this, the tests exist for a
reason!
llvm-svn: 199929
This patch adds the target analysis passes (usually TargetTransformInfo) to the
codgen pipeline. We also expose now the AddAnalysisPasses method through the C
API, because the optimizer passes would also benefit from better target-specific
cost models.
Reviewed by Andrew Kaylor
llvm-svn: 199926
Eliminate the copies LLVM's System mmap and cache invalidation code. These were
slowly drifting away from the original version, and moreover the copied code
was a dead end in terms of portability.
We now statically link to Support but in practice with stripping this adds next
to no weight to the resultant binary.
Also avoid installing lli-child-target to the user's $PATH. It's not meant to
be run directly.
llvm-svn: 199881
identify_magic is not free, so we should avoid calling it twice. The argument
also makes it cheap for createBinary to just forward to createObjectFile.
llvm-svn: 199813
The constructors of classes deriving from Binary normally take an error_code
as an argument to the constructor. My original intent was to change them
to have a trivial constructor and move the initial parsing logic to a static
method returning an ErrorOr. I changed my mind because:
* A constructor with an error_code out parameter is extremely convenient from
the implementation side. We can incrementally construct the object and give
up when we find an error.
* It is very efficient when constructing on the stack or when there is no
error. The only inefficient case is where heap allocating and an error is
found (we have to free the memory).
The result is that this is a much smaller patch. It just standardizes the
create* helpers to return an ErrorOr.
Almost no functionality change: The only difference is that this found that
we were trying to read past the end of COFF import library but ignoring the
error.
llvm-svn: 199770
Add support to llvm-readobj to decode the actual opcodes. The ARM EHABI opcodes
are a variable length instruction set that describe the operations required for
properly unwinding stack frames.
The primary motivation for this change is to ease the creation of tests for the
ARM EHABI object emission as well as the unwinding directive handling in the ARM
IAS.
Thanks to Logan Chien for an extra test case!
llvm-svn: 199708
various opt verifier commandline options.
Mostly mechanical wiring of the verifier to the new pass manager.
Exercises one of the more unusual aspects of it -- a pass can be either
a module or function pass interchangably. If this is ever problematic,
we can make things more constrained, but for things like the verifier
where there is an "obvious" applicability at both levels, it seems
convenient.
This is the next-to-last piece of basic functionality left to make the
opt commandline driving of the new pass manager minimally functional for
testing and further development. There is still a lot to be done there
(notably the factoring into .def files to kill the current boilerplate
code) but it is relatively uninteresting. The only interesting bit left
for minimal functionality is supporting the registration of analyses.
I'm planning on doing that on top of the .def file switch mostly because
the boilerplate for the analyses would be significantly worse.
llvm-svn: 199646
This makes the 'verifyFunction' and 'verifyModule' functions totally
independent operations on the LLVM IR. It also cleans up their API a bit
by lifting the abort behavior into their clients and just using an
optional raw_ostream parameter to control printing.
The implementation of the verifier is now just an InstVisitor with no
multiple inheritance. It also is significantly more const-correct, and
hides the const violations internally. The two layers that force us to
break const correctness are building a DomTree and dispatching through
the InstVisitor.
A new VerifierPass is used to implement the legacy pass manager
interface in terms of the other pieces.
The error messages produced may be slightly different now, and we may
have slightly different short circuiting behavior with different usage
models of the verifier, but generally everything works equivalently and
this unblocks wiring the verifier up to the new pass manager.
llvm-svn: 199569
When registering a pass, a pass can now specify a second construct that takes as
argument a pointer to TargetMachine.
The PassInfo class has been updated to reflect that possibility.
If such a constructor exists opt will use it instead of the default constructor
when instantiating the pass.
Since such IR passes are supposed to be rare, no specific support has been
added to this commit to allow an easy registration of such a pass.
In other words, for such pass, the initialization function has to be
hand-written (see CodeGenPrepare for instance).
Now, codegenprepare can be tested using opt:
opt -codegenprepare -mtriple=mytriple input.ll
llvm-svn: 199430
This patch adds the capability to dump export table contents. An example
output is this:
Export Table:
Ordinal RVA Name
5 0x2008 exportfn1
6 0x2010 exportfn2
By adding this feature to llvm-objdump, we will be able to use it to check
export table contents in LLD's tests. Currently we are doing binary
comparison in the tests, which is fragile and not readable to humans.
llvm-svn: 199358
If a binary does not depend on any DLL, it does not contain import table at
all. Printing the section title without contents looks wrong, so we shouldn't
print it in that case.
llvm-svn: 199340
Add a hook in the C API of LTO so that clients of the code generator can set
their own handler for the LLVM diagnostics.
The handler is defined like this:
typedef void (*lto_diagnostic_handler_t)(lto_codegen_diagnostic_severity_t
severity, const char *diag, void *ctxt)
- severity says how bad this is.
- diag is a string that contains the diagnostic message.
- ctxt is the registered context for this handler.
This hook is more general than the lto_get_error_message, since this function
keeps only the latest message and can only be queried when something went wrong
(no warning for instance).
<rdar://problem/15517596>
llvm-svn: 199338
I did write a version returning ErrorOr<OwningPtr<Binary> >, but it is too
cumbersome to use without std::move. I will keep the patch locally and submit
when we switch to c++11.
llvm-svn: 199326
MCJIT remote execution (ChildTarget+RemoteTargetExternal) protocol was in
dire need of refactoring. It was fail-prone, had no error reporting and
implemented the same message logic on every single function.
This patch rectifies it, and makes it work on ARM, where it was randomly
failing. Other architectures shall profit from this change as well, making
their buildbots and releases more reliable.
llvm-svn: 199261
Reapply r199191, reverted in r199197 because it carelessly broke
Other/link-opts.ll. The problem was that calling
createInternalizePass("main") would select
createInternalizePass(bool("main")) instead of
createInternalizePass(ArrayRef<const char *>("main")). This commit
fixes the bug.
The original commit message follows.
Add API to LTOCodeGenerator to specify a strategy for the -internalize
pass.
This is a new attempt at Bill's change in r185882, which he reverted in
r188029 due to problems with the gold linker. This puts the onus on the
linker to decide whether (and what) to internalize.
In particular, running internalize before outputting an object file may
change a 'weak' symbol into an internal one, even though that symbol
could be needed by an external object file --- e.g., with arclite.
This patch enables three strategies:
- LTO_INTERNALIZE_FULL: the default (and the old behaviour).
- LTO_INTERNALIZE_NONE: skip -internalize.
- LTO_INTERNALIZE_HIDDEN: only -internalize symbols with hidden
visibility.
LTO_INTERNALIZE_FULL should be used when linking an executable.
Outputting an object file (e.g., via ld -r) is more complicated, and
depends on whether hidden symbols should be internalized. E.g., for
ld -r, LTO_INTERNALIZE_NONE can be used when -keep_private_externs, and
LTO_INTERNALIZE_HIDDEN can be used otherwise. However,
LTO_INTERNALIZE_FULL is inappropriate, since the output object file will
eventually need to link with others.
lto_codegen_set_internalize_strategy() sets the strategy for subsequent
calls to lto_codegen_write_merged_modules() and lto_codegen_compile*().
<rdar://problem/14334895>
llvm-svn: 199244
Newer unix systems have 32 bit uid and gid types, but the archive format was
not updated. Fortunately, these fields are not normally used. Just truncate
the data to fit in 6 chars.
llvm-svn: 199223
Add API to LTOCodeGenerator to specify a strategy for the -internalize
pass.
This is a new attempt at Bill's change in r185882, which he reverted in
r188029 due to problems with the gold linker. This puts the onus on the
linker to decide whether (and what) to internalize.
In particular, running internalize before outputting an object file may
change a 'weak' symbol into an internal one, even though that symbol
could be needed by an external object file --- e.g., with arclite.
This patch enables three strategies:
- LTO_INTERNALIZE_FULL: the default (and the old behaviour).
- LTO_INTERNALIZE_NONE: skip -internalize.
- LTO_INTERNALIZE_HIDDEN: only -internalize symbols with hidden
visibility.
LTO_INTERNALIZE_FULL should be used when linking an executable.
Outputting an object file (e.g., via ld -r) is more complicated, and
depends on whether hidden symbols should be internalized. E.g., for
ld -r, LTO_INTERNALIZE_NONE can be used when -keep_private_externs, and
LTO_INTERNALIZE_HIDDEN can be used otherwise. However,
LTO_INTERNALIZE_FULL is inappropriate, since the output object file will
eventually need to link with others.
lto_codegen_set_internalize_strategy() sets the strategy for subsequent
calls to lto_codegen_write_merged_modules() and lto_codegen_compile*().
<rdar://problem/14334895>
llvm-svn: 199191
can be used by both the new pass manager and the old.
This removes it from any of the virtual mess of the pass interfaces and
lets it derive cleanly from the DominatorTreeBase<> template. In turn,
tons of boilerplate interface can be nuked and it turns into a very
straightforward extension of the base DominatorTree interface.
The old analysis pass is now a simple wrapper. The names and style of
this split should match the split between CallGraph and
CallGraphWrapperPass. All of the users of DominatorTree have been
updated to match using many of the same tricks as with CallGraph. The
goal is that the common type remains the resulting DominatorTree rather
than the pass. This will make subsequent work toward the new pass
manager significantly easier.
Also in numerous places things became cleaner because I switched from
re-running the pass (!!! mid way through some other passes run!!!) to
directly recomputing the domtree.
llvm-svn: 199104
directory. These passes are already defined in the IR library, and it
doesn't make any sense to have the headers in Analysis.
Long term, I think there is going to be a much better way to divide
these matters. The dominators code should be fully separated into the
abstract graph algorithm and have that put in Support where it becomes
obvious that evn Clang's CFGBlock's can use it. Then the verifier can
manually construct dominance information from the Support-driven
interface while the Analysis library can provide a pass which both
caches, reconstructs, and supports a nice update API.
But those are very long term, and so I don't want to leave the really
confusing structure until that day arrives.
llvm-svn: 199082
This moves the old pass creation functionality to its own header and
updates the callers of that routine. Then it adds a new PM supporting
bitcode writer to the header file, and wires that up in the opt tool.
A test is added that round-trips code into bitcode and back out using
the new pass manager.
llvm-svn: 199078
that through the interface rather than a simple bool. This should allow
starting to wire up real output to round-trip IR through opt with the
new pass manager.
llvm-svn: 199071
This implements the legacy passes in terms of the new ones. It adds
basic testing using explicit runs of the passes. Next up will be wiring
the basic output mechanism of opt up when the new pass manager is
engaged unless bitcode writing is requested.
llvm-svn: 199049
Nothing was using the ability of the pass to delete the raw_ostream it
printed to, and nothing was trying to pass it a pointer to the
raw_ostream. Also, the function variant had a different order of
arguments from all of the others which was just really confusing. Now
the interface accepts a reference, doesn't offer to delete it, and uses
a consistent order. The implementation of the printing passes haven't
been updated with this simplification, this is just the API switch.
llvm-svn: 199044
name to match the source file which I got earlier. Update the include
sites. Also modernize the comments in the header to use the more
recommended doxygen style.
llvm-svn: 199041
nests to the opt commandline support. This also showcases the
implicit-initial-manager support which will be most useful for testing.
There are several bugs that I spotted by inspection here that I'll fix
with test cases in subsequent commits.
llvm-svn: 199038
mode that can be used to debug the execution of everything.
No support for analyses here, that will come later. This already helps
show parts of the opt commandline integration that isn't working. Tests
of that will start using it as the bugs are fixed.
llvm-svn: 199004
manager. I cannot emphasize enough that this is a WIP. =] I expect it
to change a great deal as things stabilize, but I think its really
important to get *some* functionality here so that the infrastructure
can be tested more traditionally from the commandline.
The current design is looking something like this:
./bin/opt -passes='module(pass_a,pass_b,function(pass_c,pass_d))'
So rather than custom-parsed flags, there is a single flag with a string
argument that is parsed into the pass pipeline structure. This makes it
really easy to have nice structural properties that are very explicit.
There is one obvious and important shortcut. You can start off the
pipeline with a pass, and the minimal context of pass managers will be
built around the entire specified pipeline. This makes the common case
for tests super easy:
./bin/opt -passes=instcombine,sroa,gvn
But this won't introduce any of the complexity of the fully inferred old
system -- we only ever do this for the *entire* argument, and we only
look at the first pass. If the other passes don't fit in the pass
manager selected it is a hard error.
The other interesting aspect here is that I'm not relying on any
registration facilities. Such facilities may be unavoidable for
supporting plugins, but I have alternative ideas for plugins that I'd
like to try first. My plan is essentially to build everything without
registration until we hit an absolute requirement.
Instead of registration of pass names, there will be a library dedicated
to parsing pass names and the pass pipeline strings described above.
Currently, this is directly embedded into opt for simplicity as it is
very early, but I plan to eventually pull this into a library that opt,
bugpoint, and even Clang can depend on. It should end up as a good home
for things like the existing PassManagerBuilder as well.
There are a bunch of FIXMEs in the code for the parts of this that are
just stubbed out to make the patch more incremental. A quick list of
what's coming up directly after this:
- Support for function passes and building the structured nesting.
- Support for printing the pass structure, and FileCheck tests of all of
this code.
- The .def-file based pass name parsing.
- IR priting passes and the corresponding tests.
Some obvious things that I'm not going to do right now, but am
definitely planning on as the pass manager work gets a bit further:
- Pull the parsing into library, including the builders.
- Thread the rest of the target stuff into the new pass manager.
- Wire support for the new pass manager up to llc.
- Plugin support.
Some things that I'd like to have, but are significantly lower on my
priority list. I'll get to these eventually, but they may also be places
where others want to contribute:
- Adding nice error reporting for broken pass pipeline descriptions.
- Typo-correction for pass names.
llvm-svn: 198998
root path to which object files managed by the LLIObjectCache instance should be
written. This option defaults to "", in which case objects are cached in the
same directory as the bitcode they are derived from.
The load-object-a.ll test has been rewritten to use this option to support
testing in environments where the test directory is not writable.
llvm-svn: 198852
Rename bytecode to opcodes to make it more clear. Change an impossible case to
llvm_unreachable instead. Avoid allocation of a buffer by modifying the
PrintOpcodes iteration.
llvm-svn: 198848
operand into the Value interface just like the core print method is.
That gives a more conistent organization to the IR printing interfaces
-- they are all attached to the IR objects themselves. Also, update all
the users.
This removes the 'Writer.h' header which contained only a single function
declaration.
llvm-svn: 198836
With a current mingw (gcc 4.8.1) it looks like we hit some variation of
http://gcc.gnu.org/bugzilla/show_bug.cgi?id=40278
The end result is that off_t is not defined and the build fails without this
patch.
llvm-svn: 198749
I believe the bot failures on linux systems were due to overestimating the
alignment of object-files within archives, which are only guaranteed to be
two-byte aligned. I have reduced the alignment in
RuntimeDyldELF::createObjectImageFromFile accordingly.
llvm-svn: 198737
This adds some preliminary support for decoding ARM EHABI unwinding information.
The major functionality that remains from complete support is bytecode
translation.
Each Unwind Index Table is printed out as a separate entity along with its
section index, name, offset, and entries.
Each entry lists the function address, and if possible, the name, of the
function to which it corresponds. The encoding model, personality routine or
index, and byte code is also listed.
llvm-svn: 198734
are part of the core IR library in order to support dumping and other
basic functionality.
Rename the 'Assembly' include directory to 'AsmParser' to match the
library name and the only functionality left their -- printing has been
in the core IR library for quite some time.
Update all of the #includes to match.
All of this started because I wanted to have the layering in good shape
before I started adding support for printing LLVM IR using the new pass
infrastructure, and commandline support for the new pass infrastructure.
llvm-svn: 198688
(unittests/ExecutionEngine/JIT/CMakeLists.txt is still missing for now, since
it handles export files in a strange way: It generates a .exports file from a
.def file instead of the other way round.)
llvm-svn: 198183
The cmake build didn't support EXPORTED_SYMBOL_FILE. Instead, it had a
Windows-only implementation in tools/lto/CMakeLists.txt, a linux-only
implementation in tools/gold/CMakeLists.txt, and a darwin-only implementation
in tools/clang/tools/libclang/CMakeLists.txt.
This attempts to consolidate these one-offs into a single place. Clients can now
just set LLVM_EXPORTED_SYMBOL_FILE and things (hopefully) Just Work, like in
the make build.
llvm-svn: 198136
This reduces the size of clang-format from 22 MB to 1.8 MB, diagtool goes from
21 MB to 2.8 MB, libclang.so goes from 29 MB to 20 MB, etc. The size of the
bin/ folder shrinks from 270 MB to 200 MB.
Targets that support plugins and don't already use EXPORTED_SYMBOL_FILE
(which libclang and libLTO already do) can set NO_DEAD_STRIP to opt out.
llvm-svn: 198087
Although --system-libs is expected to use after --libs, it can be used alone.
$ bin/llvm-config --ldflags
-L/path/to/llvm/objroot/lib
$ bin/llvm-config --libs object
-lLLVMObject -lLLVMSupport
$ bin/llvm-config --system-libs
(Blank line. "all" is assumed but nothing is printed.)
-lrt -ldl -ltinfo -lpthread -lz
$ bin/llvm-config --ldflags --libs --system-libs object
-L/path/to/llvm/objroot/lib
-lLLVMObject -lLLVMSupport
-lrt -ldl -ltinfo -lpthread -lz
It is reimplementation of r197380, and workaround for PR3347 and PR8449.
FIXME: Each LLVM component may have its dependent system libs.
llvm-svn: 197664
Similar to the file summaries, the function summaries output line,
branching and call statistics. The file summaries have been moved
outside the initial loop so that all of the function summaries can be
outputted before file summaries.
Also updated test cases.
llvm-svn: 197633
With llvm-config.exe --bindir --libdir --build-mode, on Visual Studio 2010,
In build tree:
(OBJ_ROOT)/bin/MinSizeRel
(OBJ_ROOT)/lib/MinSizeRel
MinSizeRel
In installed tree:
(INSTALL_PREFIX)/bin
(INSTALL_PREFIX)/lib
MinSizeRel
This is enhancements since r196283.
llvm-svn: 197467
Outputs branch information for unconditional branches in addition to
conditional branches. -b option must be enabled.
Also updated tests.
llvm-svn: 197432
FIXME: Host's llvm-config is not generated. It's for target's.
Host tools, aka "BuildTools", in utils, do not require llvm-config to build.
For example with --host=i686-pc-mingw32 --build=linux,
$ BuildTools/Release+Asserts/bin/llvm-config --libs support
-lLLVMSupport
-lpthread -lshell32 -lpsapi -limagehlp -lm
llvm-svn: 197382
LLVM libs are printed in the first line, and system libs are printed in the next line.
$ bin/llvm-config --libs object
-lLLVMObject -lLLVMSupport
-lrt -ldl -ltinfo -lpthread -lz
It is workaround for PR3347 and PR8449.
llvm-svn: 197380
This option tells llvm-cov to print out branch probabilities when
a basic block contains multiple branches. It also prints out some
function summary info including the number of times the function enters,
the percent of time it returns, and how many blocks were executed.
Also updated tests.
llvm-svn: 197198
Similar to gcov, llvm-cov will now print out the block count at the end
of each block. Multiple blocks can end on the same line.
One computational difference is by using -a, llvm-cov will no longer
simply add the block counts together to form a line count. Instead, it
will take the maximum of the block counts on that line. This has a
similar effect to what gcov does, but generates more correct counts in
certain scenarios.
Also updated tests.
llvm-svn: 196856
The intended behaviour is to force vectorization on the presence
of the flag (either turn on or off), and to continue the behaviour
as expected in its absence. Tests were added to make sure the all
cases are covered in opt. No tests were added in other tools with
the assumption that they should use the PassManagerBuilder in the
same way.
This patch also removes the outdated -late-vectorize flag, which was
on by default and not helping much.
The pragma metadata is being attached to the same place as other loop
metadata, but nothing forbids one from attaching it to a function
(to enable #pragma optimize) or basic blocks (to hint the basic-block
vectorizers), etc. The logic should be the same all around.
Patches to Clang to produce the metadata will be produced after the
initial implementation is agreed upon and committed. Patches to other
vectorizers (such as SLP and BB) will be added once we're happy with
the pass manager changes.
llvm-svn: 196537
This splits the file-scope read() function into readGCNO() and
readGCDA(). Also broke file format read into functions that first read
the file type, then check the version.
llvm-svn: 196353
clang enables vectorization at optimization levels > 1 and size level < 2. opt
should behave similarily.
Loop vectorization and SLP vectorization can be disabled with the flags
-disable-(loop/slp)-vectorization.
llvm-svn: 196294
Instead of asking the user to specify a single file to output coverage
info and defaulting to STDOUT, llvm-cov now creates files for each
source file with a naming system of: <source filename> + ".llcov".
This is what gcov does and although it can clutter the working directory
with numerous coverage files, it will be easier to hook the llvm-cov
output to tools which operate on this assumption (such as lcov).
llvm-svn: 196184
only user was an ancient SCC printing bit of the opt tool which really
should be walking the call graph the same way the CGSCC pass manager
does.
llvm-svn: 195800
CallGraph.
This makes the CallGraph a totally generic analysis object that is the
container for the graph data structure and the primary interface for
querying and manipulating it. The pass logic is separated into its own
class. For compatibility reasons, the pass provides wrapper methods for
most of the methods on CallGraph -- they all just forward.
This will allow the new pass manager infrastructure to provide its own
analysis pass that constructs the same CallGraph object and makes it
available. The idea is that in the new pass manager, the analysis pass's
'run' method returns a concrete analysis 'result'. Here, that result is
a 'CallGraph'. The 'run' method will typically do only minimal work,
deferring much of the work into the implementation of the result object
in order to be lazy about computing things, but when (like DomTree)
there is *some* up-front computation, the analysis does it prior to
handing the result back to the querying pass.
I know some of this is fairly ugly. I'm happy to change it around if
folks can suggest a cleaner interim state, but there is going to be some
amount of unavoidable ugliness during the transition period. The good
thing is that this is very limited and will naturally go away when the
old pass infrastructure goes away. It won't hang around to bother us
later.
Next up is the initial new-PM-style call graph analysis. =]
llvm-svn: 195722
This patch places class definitions in implementation files into anonymous
namespaces to prevent weak vtables. This eliminates the need of providing an
out-of-line definition to pin the vtable explicitly to the file.
llvm-svn: 195092
This patch removes most of the trivial cases of weak vtables by pinning them to
a single object file. The memory leaks in this version have been fixed. Thanks
Alexey for pointing them out.
Differential Revision: http://llvm-reviews.chandlerc.com/D2068
Reviewed by Andy
llvm-svn: 195064
This change is incorrect. If you delete virtual destructor of both a base class
and a subclass, then the following code:
Base *foo = new Child();
delete foo;
will not cause the destructor for members of Child class. As a result, I observe
plently of memory leaks. Notable examples I investigated are:
ObjectBuffer and ObjectBufferStream, AttributeImpl and StringSAttributeImpl.
llvm-svn: 194997
This patch removes most of the trivial cases of weak vtables by pinning them to
a single object file.
Differential Revision: http://llvm-reviews.chandlerc.com/D2068
Reviewed by Andy
llvm-svn: 194865
Linux cannot open directories with open(2), although cygwin and *bsd can.
Motivation: The test, Object/directory.ll, had been failing with --target=cygwin on Linux. XFAIL was improper for host issues.
llvm-svn: 194257
There are two ways one could implement hiding of linkonce_odr symbols in LTO:
* LLVM tells the linker which symbols can be hidden if not used from native
files.
* The linker tells LLVM which symbols are not used from other object files,
but will be put in the dso symbol table if present.
GOLD's API is the second option. It was implemented almost 1:1 in llvm by
passing the list down to internalize.
LLVM already had partial support for the first option. It is also very similar
to how ld64 handles hiding these symbols when *not* doing LTO.
This patch then
* removes the APIs for the DSO list.
* marks LTO_SYMBOL_SCOPE_DEFAULT_CAN_BE_HIDDEN all linkonce_odr unnamed_addr
global values and other linkonce_odr whose address is not used.
* makes the gold plugin responsible for handling the API mismatch.
llvm-svn: 193800
- Mark tests as XFAIL:cygming in test/ExecutionEngine/MCJIT/remote.
Rather to suppress them, I'd like to leave them running as XFAIL.
- Revert r193472. RecordMemoryManager no longer resolves __main on cygming.
There are a couple of issues.
- X86 Codegen emits "call __main" in @main for targeting cygming.
It is useless in JIT. FYI, tests are passing when emitting __main is disabled.
- Current remote JIT does not resolve any symbols in child context.
FIXME: __main should be disabled, or remote JIT should resolve __main.
llvm-svn: 193498
Summary:
Currently shared library builds (BUILD_SHARED_LIBS=ON in cmake) fail three
bugpoint tests (BugPoint/remove_arguments_test.ll,
BugPoint/crash-narrowfunctiontest.ll, and BugPoint/metadata.ll).
If I run the bugpoint commands that llvm-lit runs with without -silence-passes
I see errors such as this:
opt: error while loading shared libraries: libLLVMSystemZInfo.so: failed to
map segment from shared object: Cannot allocate memory
It seems that the increased size of the binaries in a shared library build is
causing the subprocess to exceed the 100MB memory limit. This patch therefore
increases the default limit to a level at which these tests pass.
Reviewers: dsanders
Reviewed By: dsanders
CC: llvm-commits, rafael
Differential Revision: http://llvm-reviews.chandlerc.com/D2013
llvm-svn: 193420
This reverts commit r193255 and instead creates an lto_bool_t typedef
that points to bool, _Bool, or unsigned char depending on what is
available. Only recent versions of MSVC provide a stdbool.h header.
Reviewers: rafael.espindola
Differential Revision: http://llvm-reviews.chandlerc.com/D2019
llvm-svn: 193377
This provides rudimentary testing of the llvm-c api.
The following commands are implemented:
* --module-dump
Read bytecode from stdin - print ir
* --module-list-functions
Read bytecode from stdin - list summary of functions
* --module-list-globals
Read bytecode from stdin - list summary of globals
* --targets-list
List available targets
* --object-list-sections
Read object file from stdin - list sections
* --object-list-symbols
Read object file from stdin - list symbols (like nm)
* --disassemble
Read lines of triple, hex ascii machine code from stdin - print disassembly
* --calc
Read lines of name, rpn from stdin - print generated module ir
Differential-Revision: http://llvm-reviews.chandlerc.com/D1776
llvm-svn: 193233
- Replaced tabs with proper padding
- print() takes two arguments, which are the GCNO and GCDA filenames
- Files are listed at the top of output, appended by line 0
- Stripped strings of trailing \0s
- Removed last two lines of whitespace in output
Patch by Yuchen Wu!
llvm-svn: 193148
collectLineCounts() should only organize the output data. This is done in
anticipation of subsequent changes which will pass in GCNO and GCDA filenames
into the print function where it is printed similar to the gcov output.
Patch by Yuchen Wu!
llvm-svn: 193134
This fixes a problem from a previous check-in where a return value was omitted.
Previously the remote/stubs-remote.ll and remote/stubs-sm-pic.ll tests were reporting passes, but they should have been failing. Those tests attempt to link against an external symbol and remote symbol resolution is not supported. The old RemoteMemoryManager implementation resulted in local symbols being used for resolution and the child process crashed but the test didn't notice. With this check-in remote symbol resolution fails, and so the test (correctly) fails.
llvm-svn: 192514
