Summary:
Port the ModuleSummaryAnalysisWrapperPass to the new pass manager.
Use it in the ported BitcodeWriterPass (similar to how we use the
legacy ModuleSummaryAnalysisWrapperPass in the legacy WriteBitcodePass).
Also, pass the -module-summary opt flag through to the new pass
manager pipeline and through to the bitcode writer pass, and add
a test that uses it.
Reviewers: mehdi_amini
Subscribers: llvm-commits, mehdi_amini
Differential Revision: https://reviews.llvm.org/D23439
llvm-svn: 278508
Summary:
This patch adds IsVariadicFunction bit to summary in order
to not import variadic functions. Inliner doesn't inline
variadic functions because it is hard to reason about it.
This one small fix improves Importer by about 16%
(going from 86% to 100% of imported functions that are
inlined anywhere)
on some spec benchmarks like 'int' and others.
Reviewers: eraman, mehdi_amini, tejohnson
Subscribers: mehdi_amini, llvm-commits
Differential Revision: https://reviews.llvm.org/D23339
llvm-svn: 278432
Summary:
To enable profile-guided indirect call promotion in ThinLTO mode, we
simply add call graph edges for each profitable target from the profile
to the summaries, then the summary-guided importing will consider the
callee for importing as usual.
Also we need to enable the indirect call promotion pass creation in the
PassManagerBuilder when PerformThinLTO=true (we are in the ThinLTO
backend), so that the newly imported functions are considered for
promotion in the backends.
The IC promotion profiles refer to callees by GUID, which required
adding GUIDs to the per-module VST in bitcode (and assigning them
valueIds similar to how they are assigned valueIds in the combined
index).
Reviewers: mehdi_amini, xur
Subscribers: mehdi_amini, davidxl, llvm-commits
Differential Revision: http://reviews.llvm.org/D21932
llvm-svn: 275707
I have an LTO snapshot (for which I don't have sources) that can't
be read back by LLVM. It seems the writer emitted broken bitcode
and this assertions aims at catching such cases.
llvm-svn: 274819
Summary:
This complements the earlier addition of IntrWriteMem and IntrWriteArgMem
LLVM intrinsic properties, see D18291.
Also start using the attribute for memset, memcpy, and memmove intrinsics,
and remove their special-casing in BasicAliasAnalysis.
Reviewers: reames, joker.eph
Subscribers: joker.eph, llvm-commits
Differential Revision: http://reviews.llvm.org/D18714
llvm-svn: 274485
Summary:
This represents the adjustment applied to the implicit 'this' parameter
in the prologue of a virtual method in the MS C++ ABI. The adjustment is
always zero unless multiple inheritance is involved.
This increases the size of DISubprogram by 8 bytes, unfortunately. The
adjustment really is a signed 32-bit integer. If this size increase is
too much, we could probably win it back by splitting out a subclass with
info specific to virtual methods (virtuality, vindex, thisadjustment,
containingType).
Reviewers: aprantl, dexonsmith
Subscribers: aaboud, amccarth, llvm-commits
Differential Revision: http://reviews.llvm.org/D21614
llvm-svn: 274325
The function name Module::empty() is slightly misleading in that it
only tests for the presence of functions in the module. However we
still want to emit the module summary if the module contains only
global variables or aliases. The presence of such entities can be
determined simply by checking the summary directly, as we are doing
below.
Differential Revision: http://reviews.llvm.org/D21669
llvm-svn: 273638
This change is motivated by an upcoming change to the metadata representation
used for CFI. The indirect function call checker needs type information for
external function declarations in order to correctly generate jump table
entries for such declarations. We currently associate such type information
with declarations using a global metadata node, but I plan [1] to move all
such metadata to global object attachments.
In bitcode, metadata attachments for function declarations appear in the
global metadata block. This seems reasonable to me because I expect metadata
attachments on declarations to be uncommon. In the long term I'd also expect
this to be the case for CFI, because we'd want to use some specialized bitcode
format for this metadata that could be read as part of the ThinLTO thin-link
phase, which would mean that it would not appear in the global metadata block.
To solve the lazy loaded metadata issue I was seeing with D20147, I use the
same bitcode representation for metadata attachments for global variables as I
do for function declarations. Since there's a use case for metadata attachments
in the global metadata block, we might as well use that representation for
global variables as well, at least until we have a mechanism for lazy loading
global variables.
In the assembly format, the metadata attachments appear after the "declare"
keyword in order to avoid a parsing ambiguity.
[1] http://lists.llvm.org/pipermail/llvm-dev/2016-June/100462.html
Differential Revision: http://reviews.llvm.org/D21052
llvm-svn: 273336
pass manager passes' `run` methods.
This removes a bunch of SFINAE goop from the pass manager and just
requires pass authors to accept `AnalysisManager<IRUnitT> &` as a dead
argument. This is a small price to pay for the simplicity of the system
as a whole, despite the noise that changing it causes at this stage.
This will also helpfull allow us to make the signature of the run
methods much more flexible for different kinds af passes to support
things like intelligently updating the pass's progression over IR units.
While this touches many, many, files, the changes are really boring.
Mostly made with the help of my trusty perl one liners.
Thanks to Sean and Hal for bouncing ideas for this with me in IRC.
llvm-svn: 272978
If a local_unnamed_addr attribute is attached to a global, the address
is known to be insignificant within the module. It is distinct from the
existing unnamed_addr attribute in that it only describes a local property
of the module rather than a global property of the symbol.
This attribute is intended to be used by the code generator and LTO to allow
the linker to decide whether the global needs to be in the symbol table. It is
possible to exclude a global from the symbol table if three things are true:
- This attribute is present on every instance of the global (which means that
the normal rule that the global must have a unique address can be broken without
being observable by the program by performing comparisons against the global's
address)
- The global has linkonce_odr linkage (which means that each linkage unit must have
its own copy of the global if it requires one, and the copy in each linkage unit
must be the same)
- It is a constant or a function (which means that the program cannot observe that
the unique-address rule has been broken by writing to the global)
Although this attribute could in principle be computed from the module
contents, LTO clients (i.e. linkers) will normally need to be able to compute
this property as part of symbol resolution, and it would be inefficient to
materialize every module just to compute it.
See:
http://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20160509/356401.htmlhttp://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20160516/356738.html
for earlier discussion.
Part of the fix for PR27553.
Differential Revision: http://reviews.llvm.org/D20348
llvm-svn: 272709
Summary:
Now DISubroutineType has a 'cc' field which should be a DW_CC_ enum. If
it is present and non-zero, the backend will emit it as a
DW_AT_calling_convention attribute. On the CodeView side, we translate
it to the appropriate enum for the LF_PROCEDURE record.
I added a new LLVM vendor specific enum to the list of DWARF calling
conventions. DWARF does not appear to attempt to standardize these, so I
assume it's OK to do this until we coordinate with GCC on how to emit
vectorcall convention functions.
Reviewers: dexonsmith, majnemer, aaboud, amccarth
Subscribers: mehdi_amini, llvm-commits
Differential Revision: http://reviews.llvm.org/D21114
llvm-svn: 272197
This will be necessary to allow the global merge pass to attach
multiple debug info metadata nodes to global variables once we reverse
the edge from DIGlobalVariable to GlobalVariable.
Differential Revision: http://reviews.llvm.org/D20414
llvm-svn: 271358
This patch adds an IR, assembly and bitcode representation for metadata
attachments for globals. Future patches will port existing features to use
these new attachments.
Differential Revision: http://reviews.llvm.org/D20074
llvm-svn: 271348
Calls are initialized from a DenseMap. We can sort them using the
value id to recover some determinism during serialization.
From: mehdi_amini <mehdi_amini@91177308-0d34-0410-b5e6-96231b3b80d8>
llvm-svn: 269638
GlobalVars Refs are initialized from a DenseSet. We can sort them
using the value id to recover some determinism during serialization.
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 269635
Calls are initialized from a DenseMap. We can sort them using the
value id to recover some determinism during serialization.
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 269634
Refs are initialized from a DenseSet. We can sort them using the
value id to recover some determinism during serialization.
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 269629
This fixes a debug assert on Windows from the new iterator
implementation added in r269059. The Windows std::vector iterator
operator== checks in debug mode that the containers being iterated over
are the same, which they may not be.
Fixed by checking that we are iterating over the same container before
comparing the container iterators.
llvm-svn: 269232
This restores commit r268627:
Summary:
When launching ThinLTO backends in a distributed build (currently
supported in gold via the thinlto-index-only plugin option), emit
an individual index file for each backend process as described here:
http://lists.llvm.org/pipermail/llvm-dev/2016-April/098272.html
...
Differential Revision: http://reviews.llvm.org/D19556
Address msan failures by avoiding std::prev on map.end(), the
theory is that this is causing issues due to some known UB problems
in __tree.
llvm-svn: 269059
The bitcode upgrade I added for DISubprogram in r266446 was based on the
assumption that the CU node for the subprogram was already materialized by the
time the DISubprogram is visited. This assumption may not hold true as future
versions of LLVM may decide to write out bitcode in a different order. This
patch corrects this by introducing a versioning bit next to the distinct flag to
unambiguously differentiate the new from the old record layouts.
Note for people stabilizing LLVM out-of-tree: This patch introduces a bitcode
incompatibility with llvm trunk revisions from r266446 — this commit. (But
D19987 will ensure that it degrades gracefully).
http://reviews.llvm.org/D20004
rdar://problem/26074194
llvm-svn: 268816
Summary:
When launching ThinLTO backends in a distributed build (currently
supported in gold via the thinlto-index-only plugin option), emit
an individual index file for each backend process as described here:
http://lists.llvm.org/pipermail/llvm-dev/2016-April/098272.html
The individual index file encodes the summary and module information
required for implementing the importing/exporting decisions made
for a given module in the thin link step.
This is in place of the current mechanism that uses the combined index
to make importing decisions in each back end independently. It is an
enabler for doing global summary based optimizations in the thin link
step (which will be recorded in the individual index files), and reduces
the size of the index that must be sent to each backend process, and
the amount of work to scan it in the backends.
Rather than create entirely new ModuleSummaryIndex structures (and all
the included unique_ptrs) for each backend index file, a map is created
to record all of the GUID and summary pointers needed for a particular
index file. The IndexBitcodeWriter walks this map instead of the full
index (hiding the details of managing the appropriate summary iteration
in a new iterator subclass). This is more efficient than walking the
entire combined index and filtering out just the needed summaries during
each backend bitcode index write.
Depends on D19481.
Reviewers: joker.eph
Subscribers: llvm-commits, joker.eph
Differential Revision: http://reviews.llvm.org/D19556
llvm-svn: 268627
Summary:
With the removal of support for lazy parsing of combined index summary
records (e.g. r267344), we no longer need to include the summary record
bitcode offset in the VST entries for definitions. Change the combined
index format to be similar to the per-module index format in using value
ids to cross-reference from the summary record to the VST entry (rather
than the summary record bitcode offset to cross-reference in the other
direction).
The visible changes are:
1) Add the value id to the combined summary records
2) Remove the summary offset from the combined VST records, which has
the following effects:
- No longer need the VST_CODE_COMBINED_GVDEFENTRY record, as all
combined index VST entries now only contain the value id and
corresponding GUID.
- No longer have duplicate VST entries in the case where there are
multiple definitions of a symbol (e.g. weak/linkonce), as they all
have the same value id and GUID.
An implication of #2 above is that in order to hook up an alias to the
correct aliasee based on the value id of the aliasee recorded in the
combined index alias record, we need to scan the entries in the index
for that GUID to find the one from the same module (i.e. the case where
there are multiple entries for the aliasee). But the reader no longer
has to maintain a special map to hook up the alias/aliasee.
Reviewers: joker.eph
Subscribers: joker.eph, llvm-commits
Differential Revision: http://reviews.llvm.org/D19481
llvm-svn: 267712
Summary:
Remove the GlobalValueInfo and change the ModuleSummaryIndex to directly
reference summary objects. The info structure was there to support lazy
parsing of the combined index summary objects, which is no longer
needed and not supported.
Reviewers: joker.eph
Subscribers: joker.eph, llvm-commits
Differential Revision: http://reviews.llvm.org/D19462
llvm-svn: 267344
Right now it only contains the LinkageType, but will be extended
with "hasSection", "isOptSize", "hasInlineAssembly", etc.
Differential Revision: http://reviews.llvm.org/D19404
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 267319
Summary:
As discussed in D18298, some local globals can't
be renamed/promoted (because they have a section, or because
they are referenced from inline assembly).
To be able to detect naming collision, we need to keep around
the "GUID" using their original name without taking the linkage
into account.
Reviewers: tejohnson
Subscribers: joker.eph, llvm-commits
Differential Revision: http://reviews.llvm.org/D19454
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 267304
Eliminate DITypeIdentifierMap and make DITypeRef a thin wrapper around
DIType*. It is no longer legal to refer to a DICompositeType by its
'identifier:', and DIBuilder no longer retains all types with an
'identifier:' automatically.
Aside from the bitcode upgrade, this is mainly removing logic to resolve
an MDString-based reference to an actualy DIType. The commits leading
up to this have made the implicit type map in DICompileUnit's
'retainedTypes:' field superfluous.
This does not remove DITypeRef, DIScopeRef, DINodeRef, and
DITypeRefArray, or stop using them in DI-related metadata. Although as
of this commit they aren't serving a useful purpose, there are patchces
under review to reuse them for CodeView support.
The tests in LLVM were updated with deref-typerefs.sh, which is attached
to the thread "[RFC] Lazy-loading of debug info metadata":
http://lists.llvm.org/pipermail/llvm-dev/2016-April/098318.html
llvm-svn: 267296
Since forward references for uniqued node operands are expensive (and
those for distinct node operands are cheap due to
DistinctMDOperandPlaceholder), minimize forward references in uniqued
node operands.
Moreover, guarantee that when a cycle is broken by a distinct node, none
of the uniqued nodes have any forward references. In
ValueEnumerator::EnumerateMetadata, enumerate uniqued node subgraphs
first, delaying distinct nodes until all uniqued nodes have been
handled. This guarantees that uniqued nodes only have forward
references when there is a uniquing cycle (since r267276 changed
ValueEnumerator::organizeMetadata to partition distinct nodes in front
of uniqued nodes as a post-pass).
Note that a single uniqued subgraph can hit multiple distinct nodes at
its leaves. Ideally these would themselves be emitted in post-order,
but this commit doesn't attempt that; I think it requires an extra pass
through the edges, which I'm not convinced is worth it (since
DistinctMDOperandPlaceholder makes forward references quite cheap
between distinct nodes).
I've added two testcases:
- test/Bitcode/mdnodes-distinct-in-post-order.ll is just like
test/Bitcode/mdnodes-in-post-order.ll, except with distinct nodes
instead of uniqued ones. This confirms that, in the absence of
uniqued nodes, distinct nodes are still emitted in post-order.
- test/Bitcode/mdnodes-distinct-nodes-break-cycles.ll is the minimal
example where a naive post-order traversal would cause one uniqued
node to forward-reference another. IOW, it's the motivating test.
llvm-svn: 267278
When an operand of a distinct node hasn't been read yet, the reader can
use a DistinctMDOperandPlaceholder. This is much cheaper than forward
referencing from a uniqued node. Change
ValueEnumerator::organizeMetadata to partition distinct nodes and
uniqued nodes to reduce the overhead of cycles broken by distinct nodes.
Mehdi measured this for me; this removes most of the RAUW from the
importing step of -flto=thin, even after a WIP patch that removes
string-based DITypeRefs (introducing many more cycles to the metadata
graph).
llvm-svn: 267276
Summary:
As discussed in on the mailing list yesterday, I have refactored
BitcodeWriter.cpp to use classes to manage the bitcode writing process,
instead of passing around long lists of parameters between static
functions. See:
http://lists.llvm.org/pipermail/llvm-dev/2016-April/098610.html
I created a parent BitcodeWriter class to own the BitstreamWriter,
write the header, and contain the main entry point into the writing
process. There are two derived classes, one for writing a module and one
for writing a combined index file (for ThinLTO), which manage the
writing process specific to those bitcode file types.
I also changed the functions to conform to LLVM coding standards
(lowercase function name first letter). The only two routines that still
start with an uppercase letter are the two external interfaces, which
can be fixed as a follow-on (I wanted to keep this round just within
BitcodeWriter.cpp).
Reviewers: dexonsmith, joker.eph
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D19447
llvm-svn: 267273
Mehdi's pattern recognition pulled this one out. This is cleaner with
std::find_if than with the strange helper function that took an iterator
by reference and updated it.
llvm-svn: 267271
Re-layer the functions in the new (i.e., newly correct) post-order
traversals in ValueEnumerator (r266947) and ValueMapper (r266949).
Instead of adding a node to the worklist in a helper function and
returning a flag to say what happened, return the node itself. This
makes the code way cleaner: the worklist is local to the main function,
there is no flag for an early loop exit (since we can cleanly bury the
loop), and it's perfectly clear when pointers into the worklist might be
invalidated.
I'm fixing both algorithms in the same commit to avoid repeating the
commit message; if you take the time to understand one the other should
be easy. The diff itself isn't entirely obvious since the traversals
have some noise (i.e., things to do), but here's the high-level change:
auto helper = [&WL](T *Op) { auto helper = [](T **&I, T **E) {
=> while (I != E) {
if (shouldVisit(Op)) { T *Op = *I++;
WL.push(Op, Op->begin()); if (shouldVisit(Op)) {
return true; return Op;
} }
return false; return nullptr;
}; };
=>
WL.push(S, S->begin()); WL.push(S, S->begin());
while (!empty()) { while (!empty()) {
auto *N = WL.top().N; auto *N = WL.top().N;
auto *&I = WL.top().I; auto *&I = WL.top().I;
bool DidChange = false;
while (I != N->end())
if (helper(*I++)) { => if (T *Op = helper(I, N->end()) {
DidChange = true; WL.push(Op, Op->begin());
break; continue;
} }
if (DidChange)
continue;
POT.push(WL.pop()); => POT.push(WL.pop());
} }
Thanks to Mehdi for helping me find a better way to layer this.
llvm-svn: 267099
Emit metadata nodes in post-order. The iterative algorithm from r266709
failed to maintain this property. After understanding my mistake, it
wasn't too hard to write a test with llvm-bcanalyzer (and I've actually
made this change once before: see r220340).
This also reverts the "noisy" testcase change from r266709. That should
have been more of a red flag :/.
Note: The same bug crept into the ValueMapper in r265456. I'm still
working on the fix.
llvm-svn: 266947
Summary:
This patch prevents importing from (and therefore exporting from) any
module with a "llvm.used" local value. Local values need to be promoted
and renamed when importing, and their presense on the llvm.used variable
indicates that there are opaque uses that won't see the rename. One such
example is a use in inline assembly.
See also the discussion at:
http://lists.llvm.org/pipermail/llvm-dev/2016-April/098047.html
As part of this, move collectUsedGlobalVariables out of Transforms/Utils
and into IR/Module so that it can be used more widely. There are several
other places in LLVM that used copies of this code that can be cleaned
up as a follow on NFC patch.
Reviewers: joker.eph
Subscribers: pcc, llvm-commits, joker.eph
Differential Revision: http://reviews.llvm.org/D18986
llvm-svn: 266877
Use a worklist instead of recursing through MDNode operands in
ValueEnumerator. The actual record output order has changed slightly,
but otherwise there's no functionality change.
I had to update test/Bitcode/metadata-function-blocks.ll. I renumbered
nodes so they continue to match the implicit record ids.
llvm-svn: 266709
Removed some unused headers, replaced some headers with forward class declarations.
Found using simple scripts like this one:
clear && ack --cpp -l '#include "llvm/ADT/IndexedMap.h"' | xargs grep -L 'IndexedMap[<]' | xargs grep -n --color=auto 'IndexedMap'
Patch by Eugene Kosov <claprix@yandex.ru>
Differential Revision: http://reviews.llvm.org/D19219
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 266595
I have no idea how I chose two different spellings in the space of a
couple of weeks, but now I can't remember what to use where. Choose
"Worklist".
llvm-svn: 266582
To be able to work accurately on the reference graph when taking
decision about internalizing, promoting, renaming, etc. We need
to have the alias information explicit.
Differential Revision: http://reviews.llvm.org/D18836
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 266517
Currently each Function points to a DISubprogram and DISubprogram has a
scope field. For member functions the scope is a DICompositeType. DIScopes
point to the DICompileUnit to facilitate type uniquing.
Distinct DISubprograms (with isDefinition: true) are not part of the type
hierarchy and cannot be uniqued. This change removes the subprograms
list from DICompileUnit and instead adds a pointer to the owning compile
unit to distinct DISubprograms. This would make it easy for ThinLTO to
strip unneeded DISubprograms and their transitively referenced debug info.
Motivation
----------
Materializing DISubprograms is currently the most expensive operation when
doing a ThinLTO build of clang.
We want the DISubprogram to be stored in a separate Bitcode block (or the
same block as the function body) so we can avoid having to expensively
deserialize all DISubprograms together with the global metadata. If a
function has been inlined into another subprogram we need to store a
reference the block containing the inlined subprogram.
Attached to https://llvm.org/bugs/show_bug.cgi?id=27284 is a python script
that updates LLVM IR testcases to the new format.
http://reviews.llvm.org/D19034
<rdar://problem/25256815>
llvm-svn: 266446
