Now that we've moved to C++14, we no longer need the llvm::make_unique
implementation from STLExtras.h. This patch is a mechanical replacement
of (hopefully) all the llvm::make_unique instances across the monorepo.
llvm-svn: 369013
The traits object is only used by a few methods. Deserializing a hash
table and walking it is possible without the traits object, so it
shouldn't be required to build a dummy object for that use case.
The TraitsT object used to be a function template parameter before
r327647, this restores it to that state.
This makes it clear that the traits object isn't needed at all in 1 of
the current 3 uses of HashTable (and I am going to add another use that
doesn't need it), and that the default PdbHashTraits isn't used outside
of tests.
While here, also re-enable 3 checks in the test that were commented out
(which requires making HashTableInternals templated and giving FooBar
an operator==).
No intended behavior change.
Differential Revision: https://reviews.llvm.org/D64640
llvm-svn: 365974
lld-link used to write PDB files that DIA couldn't recover natvis
files from if:
- The global strings table was > 64kiB
- There were at least 3 natvis files
The cause was that the hash function for the /src/headerblock stream
was incorrect: It needs to be truncated to 16 bit.
If the global strings table was <= 64kiB, truncating to 16 bit is a
no-op, so this wasn't needed for small programs.
If there are only 1 or 2 natvis files, then the growth strategy in
HashTable::grow() would mean the hash table would have 2 buckets (for 1
natvis file) or 4 buckets (for 4 natvis files), and since the hash
function is used modulo number of buckets, and since 2 and 4 divide
0x10000, the missing `% 0x10000` is a no-op there too. For 3 natvis
files, the hash table grows to 6 buckets, which has a factor that's not
common with 0x10000 and the difference starts to matter.
Fixes PR41626.
Differential Revision: https://reviews.llvm.org/D61277
llvm-svn: 359515
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
Summary:
This patch just extends the `IPDBSession` interface to allow retrieving
of frame data through it, and adds an implementation over DIA. It is needed
for an implementation (for now with DIA) of the conversion from FPO programs
to DWARF expressions mentioned in D53086.
Reviewers: zturner, asmith, rnk
Reviewed By: asmith
Subscribers: mgorny, aprantl, JDevlieghere, llvm-commits
Differential Revision: https://reviews.llvm.org/D53324
llvm-svn: 344886
Using llvm::getInputFileDirectory() in unit tests is discouraged, so require an explicit opt-in.
This way, cmake also writes ~60 fewer unused files to disk.
Differential Revision: https://reviews.llvm.org/D52095
llvm-svn: 342248
libLLVMTestingSupport.so references a symbol in utils/unittest/UnitTestMain/TestMain.cpp (a layering issue) and will cause a link error because of -Wl,-z,defs (cmake/modules/HandleLLVMOptions.cmake)
Waiting zturner for a better fix.
llvm-svn: 341580
The way DIA SDK works is that when you request a symbol, it
gets assigned an internal identifier that is unique for the
life of the session. You can then use this identifier to
get back the same symbol, with all of the same internal state
that it had before, even if you "destroyed" the original
copy of the object you had.
This didn't work properly in our native implementation, and
if you destroyed an object for a particular symbol, then
requested the same symbol again, it would get assigned a new
ID and you'd get a fresh copy of the object. In order to fix
this some refactoring had to happen to properly reuse cached
objects. Some unittests are added to verify that symbol
reuse is taking place, making use of the new unittest input
feature.
llvm-svn: 341503
To resolve symbol context at a particular address, we need to
determine the compiland for the address. We are able to determine
the parent compiland of PDBSymbolFunc, PDBSymbolTypeUDT,
PDBSymbolTypeEnum symbols indirectly through line information.
However no such information is availabile for PDBSymbolData,
i.e. variables.
The Section Contribution table from PDBs has information about
each compiland's contribution to sections by address. For example,
a piece of a contribution looks like,
VA RelativeVA Sect No. Offset Length Compiland
14000087B0 000087B0 0001 000077B0 000000BB exe_main.obj
So given an address, it's possible to determine its compiland with
this information.
llvm-svn: 328178
The hash table is a list of buckets, and the *value* stored in
the bucket cannot be 0 since that is reserved. However, the code
here was incorrectly skipping over the 0'th bucket entirely.
The 0'th bucket is perfectly fine, just none of these buckets
can contain the value 0.
As a result, whenever there was a string where hash(S) % Size
was equal to 0, we would write the value in the next bucket
instead. We never caught this in our tests due to *another*
bug, which is that we would iterate the entire list of buckets
looking for the value, only using the hash value as a starting
point. However, the real algorithm stops when it finds 0 in
a bucket since it takes that to mean "the item is not in the
hash table".
The unit test is updated to carefully construct a set of hash
values that will cause one item to hash to 0 mod bucket count,
and the reader is also updated to return an error indicating that
the item is not found when it encounters a 0 bucket.
llvm-svn: 328162
It previously only worked when the key and value types were
both 4 byte integers. We now have a use case for a non trivial
value type, so we need to extend it to support arbitrary value
types, which means templatizing it.
llvm-svn: 327647
Summary:
Some PDB symbols do not have a valid VA or RVA but have Addr by Section and Offset. For example, a variable in thread-local storage has the following properties:
get_addressOffset: 0
get_addressSection: 5
get_lexicalParentId: 2
get_name: g_tls
get_symIndexId: 12
get_typeId: 4
get_dataKind: 6
get_symTag: 7
get_locationType: 2
This change provides a new method to locate line numbers by Section and Offset from those symbols.
Reviewers: zturner, rnk, llvm-commits
Subscribers: asmith, JDevlieghere
Differential Revision: https://reviews.llvm.org/D44407
llvm-svn: 327601
Summary: This helps to determine the line number for a PDB type with definition
Reviewers: zturner, llvm-commits, rnk
Reviewed By: zturner
Subscribers: rengolin, JDevlieghere
Differential Revision: https://reviews.llvm.org/D44119
llvm-svn: 326857
This was originally reported as a bug with the symptom being "cvdump
crashes when printing an LLD-linked PDB that has an S_FILESTATIC record
in it". After some additional investigation, I determined that this was
a symptom of a larger problem, and in fact the real problem was in the
way we emitted the global PDB string table. As evidence of this, you can
take any lld-generated PDB, run cvdump -stringtable on it, and it would
return no results.
My hypothesis was that cvdump could not *find* the string table to begin
with. Normally it would do this by looking in the "named stream map",
finding the string /names, and using its value as the stream index. If
this lookup fails, then cvdump would fail to load the string table.
To test this hypothesis, I looked at the name stream map generated by a
link.exe PDB, and I emitted exactly those bytes into an LLD-generated
PDB. Suddenly, cvdump could read our string table!
This code has always been hacky and we knew there was something we
didn't understand. After all, there were some comments to the effect of
"we have to emit strings in a specific order, otherwise things don't
work". The key to fixing this was finally understanding this.
The way it works is that it makes use of a generic serializable hash map
that maps integers to other integers. In this case, the "key" is the
offset into a buffer, and the value is the stream number. If you index
into the buffer at the offset specified by a given key, you find the
name. The underlying cause of all these problems is that we were using
the identity function for the hash. i.e. if a string's offset in the
buffer was 12, the hash value was 12. Instead, we need to hash the
string *at that offset*. There is an additional catch, in that we have
to compute the hash as a uint32 and then truncate it to uint16.
Making this work is a little bit annoying, because we use the same hash
table in other places as well, and normally just using the identity
function for the hash function is actually what's desired. I'm not
totally happy with the template goo I came up with, but it works in any
case.
The reason we never found this bug through our own testing is because we
were building a /parallel/ hash table (in the form of an
llvm::StringMap<>) and doing all of our lookups and "real" hash table
work against that. I deleted all of that code and now everything goes
through the real hash table. Then, to test it, I added a unit test which
adds 7 strings and queries the associated values. I test every possible
insertion order permutation of these 7 strings, to verify that it really
does work as expected.
Differential Revision: https://reviews.llvm.org/D43326
llvm-svn: 325386
We currently use target_link_libraries without an explicit scope
specifier (INTERFACE, PRIVATE or PUBLIC) when linking executables.
Dependencies added in this way apply to both the target and its
dependencies, i.e. they become part of the executable's link interface
and are transitive.
Transitive dependencies generally don't make sense for executables,
since you wouldn't normally be linking against an executable. This also
causes issues for generating install export files when using
LLVM_DISTRIBUTION_COMPONENTS. For example, clang has a lot of LLVM
library dependencies, which are currently added as interface
dependencies. If clang is in the distribution components but the LLVM
libraries it depends on aren't (which is a perfectly legitimate use case
if the LLVM libraries are being built static and there are therefore no
run-time dependencies on them), CMake will complain about the LLVM
libraries not being in export set when attempting to generate the
install export file for clang. This is reasonable behavior on CMake's
part, and the right thing is for LLVM's build system to explicitly use
PRIVATE dependencies for executables.
Unfortunately, CMake doesn't allow you to mix and match the keyword and
non-keyword target_link_libraries signatures for a single target; i.e.,
if a single call to target_link_libraries for a particular target uses
one of the INTERFACE, PRIVATE, or PUBLIC keywords, all other calls must
also be updated to use those keywords. This means we must do this change
in a single shot. I also fully expect to have missed some instances; I
tested by enabling all the projects in the monorepo (except dragonegg),
and configuring both with and without shared libraries, on both Darwin
and Linux, but I'm planning to rely on the buildbots for other
configurations (since it should be pretty easy to fix those).
Even after this change, we still have a lot of target_link_libraries
calls that don't specify a scope keyword, mostly for shared libraries.
I'm thinking about addressing those in a follow-up, but that's a
separate change IMO.
Differential Revision: https://reviews.llvm.org/D40823
llvm-svn: 319840
Initial changes to support debugging PE/COFF files with LLDB on Windows through DIA SDK.
There is another set of changes required on the LLDB side before this does anything.
Differential Revision: https://reviews.llvm.org/D39517
llvm-svn: 318403
Recently problems have been discovered in the way we write the FPM
(free page map). In order to fix this, we first need to establish
a baseline about what a correct FPM looks like using an MSVC
generated PDB, so that we can then make our own generated PDBs
match. And in order to do this, the dumper needs a mode where it
can dump an FPM so that we can write tests for it.
This patch adds a command to dump the FPM, as well as a test against
a known-good PDB.
llvm-svn: 309894
Summary:
Instead of wiring these through the CVTypeVisitor interface, clients
should inspect the CVTypeArray before visiting it and potentially load
up the type server's TPI stream if they need it.
No tests relied on this functionality because LLD was the only client.
Reviewers: ruiu
Subscribers: mgorny, hiraditya, zturner, llvm-commits
Differential Revision: https://reviews.llvm.org/D35394
llvm-svn: 308212
There doesn't seem to be a compelling reason why this method should be const
other than it was possible with the DIA implementation. The native session
is going to act as a symbol factory and cache. This could be acheived with
mutable (and the existing const_cast), but it seems cleaner to accept that
this method affects the state of the session.
This change eliminates an existing const_cast.
llvm-svn: 306041
Instead use target_link_libraries directly. Thanks to
Juergen Ributzka for the suggestion, which fixes an issue
when llvm is configured with no targets.
llvm-svn: 305421
Many times unit tests for different libraries would like to use
the same helper functions for checking common types of errors.
This patch adds a common library with helpers for testing things
in Support, and introduces helpers in here for integrating the
llvm::Error and llvm::Expected<T> classes with gtest and gmock.
Normally, we would just be able to write:
EXPECT_THAT(someFunction(), succeeded());
but due to some quirks in llvm::Error's move semantics, gmock
doesn't make this easy, so two macros EXPECT_THAT_ERROR() and
EXPECT_THAT_EXPECTED() are introduced to gloss over the difficulties.
Consider this an exception, and possibly only temporary as we
look for ways to improve this.
Differential Revision: https://reviews.llvm.org/D33059
llvm-svn: 305395
Previously MappedBlockStream owned its own BumpPtrAllocator that
it would allocate from when a read crossed a block boundary. This
way it could still return the user a contiguous buffer of the
requested size. However, It's not uncommon to open a stream, read
some stuff, close it, and then save the information for later.
After all, since the entire file is mapped into memory, the data
should always be available as long as the file is open.
Of course, the exception to this is when the data isn't *in* the
file, but rather in some buffer that we temporarily allocated to
present this contiguous view. And this buffer would get destroyed
as soon as the strema was closed.
The fix here is to force the user to specify the allocator, this
way it can provide an allocator that has whatever lifetime it
chooses.
Differential Revision: https://reviews.llvm.org/D33858
llvm-svn: 304623
It was using the number of blocks of the entire PDB file as the number
of blocks of each stream that was created. This was only an issue in
the readLongestContiguousChunk function, which was never called prior.
This bug surfaced when I updated an algorithm to use this function and
the algorithm broke.
llvm-svn: 303916
There is often a lot of boilerplate code required to visit a type
record or type stream. The #1 use case is that you have a sequence
of bytes that represent one or more records, and you want to
deserialize each one, switch on it, and call a callback with the
deserialized record that the user can examine. Currently this
requires at least 6 lines of code:
codeview::TypeVisitorCallbackPipeline Pipeline;
Pipeline.addCallbackToPipeline(Deserializer);
Pipeline.addCallbackToPipeline(MyCallbacks);
codeview::CVTypeVisitor Visitor(Pipeline);
consumeError(Visitor.visitTypeRecord(Record));
With this patch, it becomes one line of code:
consumeError(codeview::visitTypeRecord(Record, MyCallbacks));
This is done by having the deserialization happen internally inside
of the visitTypeRecord function. Since this is occasionally not
desirable, the function provides a 3rd parameter that can be used
to change this behavior.
Hopefully this can significantly reduce the barrier to entry
to using the visitation infrastructure.
Differential Revision: https://reviews.llvm.org/D33245
llvm-svn: 303271
llvm-readobj hand rolls some CodeView parsing code for string
tables, so this patch updates it to re-use some of the newly
introduced parsing code in LLVMDebugInfoCodeView.
Differential Revision: https://reviews.llvm.org/D32772
llvm-svn: 302052
This was reverted due to a "missing" file, but in reality
what happened was that I renamed a file, and then due to
a merge conflict both the old file and the new file got
added to the repository. This led to an unused cpp file
being in the repo and not referenced by any CMakeLists.txt
but #including a .h file that wasn't in the repo. In an
even more unfortunate coincidence, CMake didn't report the
unused cpp file because it was in a subdirectory of the
folder with the CMakeLists.txt, and not in the same directory
as any CMakeLists.txt.
The presence of the unused file was then breaking certain
tools that determine file lists by globbing rather than
by what's specified in CMakeLists.txt
In any case, the fix is to just remove the unused file from
the patch set.
llvm-svn: 302042
The patch is failing to add StringTableStreamBuilder.h, but that isn't
even discovered because the corresponding StringTableStreamBuilder.cpp
isn't added to any CMakeLists.txt file and thus never built. I think
this patch is just incomplete.
llvm-svn: 302002
Previously we had knowledge of how to serialize and deserialize
a string table inside of DebugInfo/PDB, but the string table
that it serializes contains a piece that is actually considered
CodeView and can appear outside of a PDB. We already have logic
in llvm-readobj and MCCodeView to read and write this format,
so it doesn't make sense to duplicate the logic in DebugInfoPDB
as well.
This patch makes codeview::StringTable (for writing) and
codeview::StringTableRef (for reading), updates DebugInfoPDB
to use these classes for its own writing, and updates llvm-readobj
to additionally use StringTableRef for reading.
It's a bit more difficult to get MCCodeView to use this for
writing, but it's a logical next step.
llvm-svn: 301986
With the forthcoming codeview::StringTable which a pdb::StringTable
would hold an instance of as one member, this ambiguity becomes
confusing. Rename to PDBStringTable to avoid this.
llvm-svn: 301948
Previously the dumping of class definitions was very primitive,
and it made it hard to do more than the most trivial of output
formats when dumping. As such, we would only dump one line for
each field, and then dump non-layout items like nested types
and enums.
With this patch, we do a complete analysis of the object
hierarchy including aggregate types, bases, virtual bases,
vftable analysis, etc. The only immediately visible effects
of this are that a) we can now dump a line for the vfptr where
before we would treat that as padding, and b) we now don't
treat virtual bases that come at the end of a class as padding
since we have a more detailed analysis of the class's storage
usage.
In subsequent patches, we should be able to use this analysis
to display a complete graphical view of a class's layout including
recursing arbitrarily deep into an object's base class / aggregate
member hierarchy.
llvm-svn: 300133
After several smaller patches to get most of the core improvements
finished up, this patch is a straight move and header fixup of
the source.
Differential Revision: https://reviews.llvm.org/D30266
llvm-svn: 296810
