Summary:
This adds support for the --discard-locals flag, which acts similarly to --discard-all, except it only applies to compiler-generated symbols (i.e. symbols starting with `.L` in ELF).
I am not sure about COFF local symbols: those appear to also use `.L` in most cases, but also use just `L` in other cases, so for now I am just leaving it unimplemented there.
Fixes PR36160
Reviewers: jhenderson, alexshap, jakehehrlich, mstorsjo, espindola
Reviewed By: jhenderson
Subscribers: llvm-commits, emaste, arichardson
Differential Revision: https://reviews.llvm.org/D57248
llvm-svn: 352626
Summary: Do some more error cleanup, removing some dependencies from llvm-objcopy's error/reportError in [ELF/COFF]Objcopy methods.
Reviewers: jhenderson, alexshap, jakehehrlich, mstorsjo, espindola
Subscribers: emaste, arichardson
Differential Revision: https://reviews.llvm.org/D57423
llvm-svn: 352625
We have a Field struct which has a StringRef member Str.
The code needs to create and keep alive the temporarily
std::string variables because of that.
That is not convenient and makes the code be more complicated
than it could be.
There seems to be no reason to keep Str be StringRef.
The patch changes it to be std::string and
rearranges the code around slightly.
Differential revision: https://reviews.llvm.org/D57447
llvm-svn: 352623
Summary:
This patch fixes access to fpo streams in native pdb from DbiStream and makes
code consistent with DbiStreamBuilder.
Patch By: leonid.mashinskiy
Reviewers: zturner, aleksandr.urakov
Reviewed By: zturner
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D56725
llvm-svn: 352615
Summary:
--set-section-flags is used to change the section flags (e.g. SHF_ALLOC) for given sections. The flags allowed are the same from the existing --rename-section=.old=.new[,flags] feature.
Additionally, make sure that --set-section-flag cannot be used with --rename-section (either the source or destination), since --rename-section accepts flags. This avoids ambiguity for something like "--rename-section=.foo=.bar,alloc --set-section-flag=.bar,code".
Reviewers: jhenderson, jakehehrlich, alexshap, espindola
Reviewed By: jhenderson, jakehehrlich
Subscribers: llvm-commits, emaste, arichardson
Differential Revision: https://reviews.llvm.org/D57198
llvm-svn: 352505
They were breaking the Windows build when using MSBuild, see the
discussion on D56781.
r351833: "Use response file when generating LLVM-C.dll"
> Use response file when generating LLVM-C.dll
>
> As discovered in D56774 the command line gets to long, so use a response file to give the script the libs. This change has been tested and is confirmed working for me.
>
> Commited on behalf of Jakob Bornecrantz
>
> Differential Revision: https://reviews.llvm.org/D56781
r352250: "Build LLVM-C.dll by default on windows and enable in release package"
> Build LLVM-C.dll by default on windows and enable in release package
>
> With the fixes to the building of LLVM-C.dll in D56781 this should now
> be safe to land. This will greatly simplify dealing with LLVM for people
> that just want to use the C API on windows. This is a follow up from
> D35077.
>
> Patch by Jakob Bornecrantz!
>
> Differential revision: https://reviews.llvm.org/D56774
llvm-svn: 352492
Seems when committed the r352366
("[llvm-objdump] - Print LMAs when dumping section headers.")
I resolved merge conflict incorrectly and removed this piece by mistake.
Bots did not catch this yet, seems they are slow today,
but the `X86/adjust-vma.test` test case fails locally for me without that.
llvm-svn: 352383
I faced with the fact that obj2yaml does not dump the sh_entsize field.
A problem arose when I tried to dump ELF versioning sections.
This is close to what D50235 did, but D50235 did the change for yaml2obj, and now
I had to do the same for obj2yaml.
Differential revision: https://reviews.llvm.org/D57229
llvm-svn: 352373
Summary: When using llvm-objcopy -O binary and the resulting file will be empty (e.g. removing the only section that would be written, or using --only-keep with a section that doesn't exist/isn't SHF_ALLOC), we crash because FileOutputBuffer expects Size > 0. Add a regression test, and change Buffer to open/truncate the output file in this case.
Reviewers: alexshap, jhenderson, jakehehrlich, espindola
Reviewed By: alexshap, jhenderson
Subscribers: jfb, llvm-commits, emaste, arichardson
Differential Revision: https://reviews.llvm.org/D56806
llvm-svn: 352371
When --section-headers is used, GNU objdump prints both LMA and VMA for sections.
llvm-objdump does not do that what makes it's output be slightly inconsistent.
Patch teaches llvm-objdump to print LMA/VMA for ELF file formats.
The behavior for other formats remains unchanged.
Differential revision: https://reviews.llvm.org/D57146
llvm-svn: 352366
GNU objdump's help says: "--adjust-vma: Add OFFSET to all displayed section addresses"
In real life what it does is a bit more complicated
(and IMO not always reasonable. For example, GNU objdump prints not only VMA, but also LMA
for sections. And with --adjust-vma it adjusts LMA, but only when a section has relocations.
llvm-objsump does not seem to support printing LMAs yet, but GNU's logic anyways does not
make sense for me here).
This patch tries to adjust VMA. I tried to implement a reasonable approach.
I am not adjusting sections that are not allocatable. As, for example, adjusting debug sections
VA's and rel[a] sections VA's should not make sense. This behavior seems to be GNU compatible.
Differential revision: https://reviews.llvm.org/D57051
llvm-svn: 352347
N_FUNC_COLD is a new MachO symbol attribute. It's a hint to the linker
to order a symbol towards the end of its section, to improve locality.
Example:
```
void a1() {}
__attribute__((cold)) void a2() {}
void a3() {}
int main() {
a1();
a2();
a3();
return 0;
}
```
A linker that supports N_FUNC_COLD will order _a2 to the end of the text
section. From `nm -njU` output, we see:
```
_a1
_a3
_main
_a2
```
Differential Revision: https://reviews.llvm.org/D57190
llvm-svn: 352227
This patch adds support for displaying remarks with multiple
lines. For such remarks, it creates a hidden div
containing the message's lines except the first one in a <pre>
tag. It also prepends a link (with '+' as text) to the regular remark
line. This link can be used to show/hide the div containing the
full remark.
In combination with D57159, this allows for better displaying of
multiline remarks in the html pages generated by opt-viewer.
The Javascript is very simple and should be supported by any recent
major browser.
Reviewers: hfinkel, anemet, thegameg, serge-sans-paille
Reviewed By: anemet
Differential Revision: https://reviews.llvm.org/D57167
llvm-svn: 352223
If a stack trace or similar has a list of addresses from an executable
or DSO loaded at a variable address (e.g. due to ASLR), the addresses
will not directly correspond to the addresses stored in the object file.
If a user wishes to use llvm-symbolizer, they have to subtract the load
address from every address. This is somewhat inconvenient, especially as
the output of --print-address will result in the adjusted address being
listed, rather than the address coming from the stack trace, making it
harder to map results between the two.
This change adds a new switch to llvm-symbolizer --adjust-vma which
takes an offset, which is then used to automatically do this
calculation. The printed address remains the input address (allowing for
easy mapping), whilst the specified offset is applied to the addresses
when performing the lookup.
The switch is conceptually similar to llvm-objdump's new switch of the
same name (see D57051), which in turn mirrors a GNU switch. There is no
equivalent switch in addr2line.
Reviewed by: grimar
Differential Revision: https://reviews.llvm.org/D57151
llvm-svn: 352195
This change adds an option -g to llvm-objcopy which is an alias for the existing option --strip-debug.
This fixes PR40003.
Reviewed by: alexshap
Differential Revision: https://reviews.llvm.org/D57217
llvm-svn: 352182
This patch adds initial support for reading dynamic symbols from ELF binaries. Currently, STT_NOTYPE, STT_OBJECT, STT_FUNC, and STT_TLS are explicitly supported. Other symbol types are mapped to ELFSymbolType::Unknown to improve signal/noise ratio.
Symbols must meet two criteria to be read into in an ELFStub:
- The symbol's binding must be STB_GLOBAL or STB_WEAK.
- The symbol's visibility must be STV_DEFAULT or STV_PROTECTED.
This filters out symbols that aren't of interest during compile-time linking against a shared object.
This change uses DT_HASH and DT_GNU_HASH to determine the size of .dynsym. Using hash tables to determine the number of symbols in .dynsym allows llvm-elfabi to work on binaries without relying on section headers.
Differential Revision: https://reviews.llvm.org/D56031
llvm-svn: 352121
PDBs contain several serialized hash tables. In the microsoft-pdb
repo published to support LLVM implementing PDB support, the
provided initializes the bucket count for the TPI and IPI streams
to the maximum size. This occurs in tpi.cpp L33 and tpi.cpp L398.
In the LLVM code for generating PDBs, these streams are created with
minimum number of buckets. This difference makes LLVM generated
PDBs slower for when used for debugging.
Patch by C.J. Hebert
Differential Revision: https://reviews.llvm.org/D56942
llvm-svn: 352117
This change adds two options, -i and -inlines as aliases for the -inlining option to llvm-symbolizer to improve compatibility with the GNU addr2line utility which accepts these options.
It also modifies existing tests that use -inlining to exercise these new aliases as well.
This fixes PR40073.
Reviewed by: jhenderson, Quolyk, ruiu
Differential Revision: https://reviews.llvm.org/D57083
llvm-svn: 351999
This fixes https://bugs.llvm.org/show_bug.cgi?id=40072.
GNU addr2line's --functions switch is off by default, has a short alias
of -f, and does not take an argument. This patch changes llvm-symbolizer
to allow the second and third point (changing the default behaviour may
have negative impacts on users). If the option is missing a value, it
now treats it as "linkage".
This change does cause one previously valid command-line to behave
differently. Before --functions <value> was accepted, but now only
--functions=<value> is allowed (as well as --functions). The old
behaviour will result in the value being treated as a positional
argument.
The previous testing for --functions=short has been pulled out into a
new test that also tests the other accepted values and option formats.
Reviewed by: ruiu
Differential Revision: https://reviews.llvm.org/D57049
llvm-svn: 351968
This patch adds a new ReadAdvance definition named ReadInt2Fpu.
ReadInt2Fpu allows x86 scheduling models to accurately describe delays caused by
data transfers from the integer unit to the floating point unit.
ReadInt2Fpu currently defaults to a delay of zero cycles (i.e. no delay) for all
x86 models excluding BtVer2. That means, this patch is only a functional change
for the Jaguar cpu model only.
Tablegen definitions for instructions (V)PINSR* have been updated to account for
the new ReadInt2Fpu. That read is mapped to the the GPR input operand.
On Jaguar, int-to-fpu transfers are modeled as a +6cy delay. Before this patch,
that extra delay was added to the opcode latency. In practice, the insert opcode
only executes for 1cy. Most of the actual latency is actually contributed by the
so-called operand-latency. According to the AMD SOG for family 16h, (V)PINSR*
latency is defined by expression f+1, where f is defined as a forwarding delay
from the integer unit to the fpu.
When printing instruction latency from MCA (see InstructionInfoView.cpp) and LLC
(only when flag -print-schedule is speified), we now need to account for any
extra forwarding delays. We do this by checking if scheduling classes declare
any negative ReadAdvance entries. Quoting a code comment in TargetSchedule.td:
"A negative advance effectively increases latency, which may be used for
cross-domain stalls". When computing the instruction latency for the purpose of
our scheduling tests, we now add any extra delay to the formula. This avoids
regressing existing codegen and mca schedule tests. It comes with the cost of an
extra (but very simple) hook in MCSchedModel.
Differential Revision: https://reviews.llvm.org/D57056
llvm-svn: 351965
In r287786, a bug was introduced into llvm-readelf where it didn't print
the static symbol table if both --symbols and --dyn-symbols were
specified, even if there was no dynamic symbol table. This is obviously
incorrect.
This patch fixes this issue, by delegating the decision of which symbol
tables should be printed to the final dumper, rather than trying to
decide in the command-line option handling layer. The decision was made
to follow the approach taken in this patch because the LLVM style dumper
uses a different order to the original GNU style behaviour (and GNU
readelf) for ELF output. Other approaches resulted in behaviour changes
for other dumpers which felt wrong. In particular, I wanted to avoid
changing the order of the output for --symbols --dyn-symbols for LLVM
style, keep what is emitted by --symbols unchanged for all dumpers, and
avoid having different orders of .dynsym and .symtab dumping for GNU
"--symbols" and "--symbols --dyn-symbols".
Reviewed by: grimar, rupprecht
Differential Revision: https://reviews.llvm.org/D57016
llvm-svn: 351960
The aux symbols were stored in an opaque std::vector<uint8_t>,
with contents interpreted according to the rest of the symbol.
All aux symbol types but one fit in 18 bytes (sizeof(coff_symbol16)),
and if written to a bigobj, two extra padding bytes are written (as
sizeof(coff_symbol32) is 20). In the storage agnostic intermediate
representation, store the aux symbols as a series of coff_symbol16
sized opaque blobs. (In practice, all such aux symbols only consist
of one aux symbol, so this is more flexible than what reality needs.)
The special case is the file aux symbols, which are written in
potentially more than one aux symbol slot, without any padding,
as one single long string. This can't be stored in the same opaque
vector of fixed sized aux symbol entries. The file aux symbols will
occupy a different number of aux symbol slots depending on the type
of output object file. As nothing in the intermediate process needs
to have accurate raw symbol indices, updating that is moved into the
writer class.
Differential Revision: https://reviews.llvm.org/D57009
llvm-svn: 351947
Currently, disassembleObject() is a ~550 lines length function.
This patch splits it into two, where first do all helper objects initializations
and calls the second which does all the rest job.
This is a straightforward split.
Differential revision: https://reviews.llvm.org/D57020
llvm-svn: 351940
This was reverted since it broke a couple buildbots. The reason
for the breakage is not yet known, but this time, the test has
got more diagnostics added, to hopefully allow figuring out
what goes wrong.
Differential Revision: https://reviews.llvm.org/D57007
llvm-svn: 351931
Summary:
This patch changes a few methods to return Error instead of manually calling error/reportError to abort. This will make it easier to extract into a library.
Note that error() takes just a string (this patch also adds an overload that takes an Error), while reportError() takes string + [error/code]. To help unify things, use FileError to associate a given filename with an error. Note that this takes some special care (for now), e.g. calling reportError(FileName, <something that could be FileError>) will duplicate the filename. The goal is to eventually remove reportError() and have every error associated with a file to be a FileError, and just one error handling block at the tool level.
This change was suggested in D56806. I took it a little further than suggested, but completely fixing llvm-objcopy will take a couple more patches. If this approach looks good, I'll commit this and apply similar patche(s) for the rest.
This change is NFC in terms of non-error related code, although the error message changes in one context.
Reviewers: alexshap, jhenderson, jakehehrlich, mstorsjo, espindola
Reviewed By: alexshap, jhenderson
Subscribers: llvm-commits, emaste, arichardson
Differential Revision: https://reviews.llvm.org/D56930
llvm-svn: 351896
As discovered in D56774 the command line gets to long, so use a response file to give the script the libs. This change has been tested and is confirmed working for me.
Commited on behalf of Jakob Bornecrantz
Differential Revision: https://reviews.llvm.org/D56781
llvm-svn: 351833
Currently disassembleObject() is a ~550 lines length function.
This patch extracts the code that creates a section->their relocation
mapping into a new helper function to simplify/reduce it a bit.
Differential revision: https://reviews.llvm.org/D57019
llvm-svn: 351824
This was requested in the review of D57006.
Also add missing quotes around symbol names in error messages.
Differential Revision: https://reviews.llvm.org/D57014
llvm-svn: 351799
In r287786, the behaviour of --dyn-symbols in llvm-readelf (but not
llvm-readobj) was changed to print the dynamic symbols as derived from
the hash table, rather than to print the dynamic symbol table contents
directly. The original change was initially submitted without review,
and some comments were made on the commit mailing list implying that the
new behavious is GNU compatible. I argue that it is not:
1) It does not include a null symbol.
2) It prints the symbols based on an order derived from the hash
table.
3) It prints an extra column indicating which bucket it came from.
This could break parsers that expect a fixed number of columns,
with the first column being the symbol index.
4) If the input happens to have both .hash and .gnu.hash section, it
prints interpretations of them both, resulting in most symbols
being printed twice.
5) There is no way of just printing the raw dynamic symbol table,
because --symbols also prints the static symbol table.
This patch reverts the --dyn-symbols behaviour back to its old behaviour
of just printing the contents of the dynamic symbol table, similar to
what is printed by --symbols. As the hashed interpretation is still
desirable to validate the hash table, it puts it under a new switch
"--hash-symbols". This is a no-op on all output forms except for GNU
output style for ELF. If there is no hash table, it does nothing,
unlike the previous behaviour which printed the raw dynamic symbol
table, since the raw dynsym is available under --dyn-symbols.
The yaml input for the test is based on that in
test/tools/llvm-readobj/demangle.test, but stripped down to the bare
minimum to provide a valid dynamic symbol.
Note: some LLD tests needed updating. I will commit a separate patch for
those.
Reviewed by: grimar, rupprecht
Differential Revision: https://reviews.llvm.org/D56910
llvm-svn: 351789
all missed!
Thanks to Alex Bradbury for pointing this out, and the fact that I never
added the intended `legacy` anchor to the developer policy. Add that
anchor too. With hope, this will cause the links to all resolve
successfully.
llvm-svn: 351731
As noted in https://bugs.llvm.org/show_bug.cgi?id=36651, the specialization for
isPodLike<std::pair<...>> did not match the expectation of
std::is_trivially_copyable which makes the memcpy optimization invalid.
This patch renames the llvm::isPodLike trait into llvm::is_trivially_copyable.
Unfortunately std::is_trivially_copyable is not portable across compiler / STL
versions. So a portable version is provided too.
Note that the following specialization were invalid:
std::pair<T0, T1>
llvm::Optional<T>
Tests have been added to assert that former specialization are respected by the
standard usage of llvm::is_trivially_copyable, and that when a decent version
of std::is_trivially_copyable is available, llvm::is_trivially_copyable is
compared to std::is_trivially_copyable.
As of this patch, llvm::Optional is no longer considered trivially copyable,
even if T is. This is to be fixed in a later patch, as it has impact on a
long-running bug (see r347004)
Note that GCC warns about this UB, but this got silented by https://reviews.llvm.org/D50296.
Differential Revision: https://reviews.llvm.org/D54472
llvm-svn: 351701
