Use the pointer size if datalayout is available.
Use i64 if it's not, which is consistent with what other
places do when the pointer size is unknown.
The test doesn't really test this in a useful way
since it will be transformed to that later anyway,
but this now tests it for non-zero arrays and when
datalayout isn't available. The cases in
visitGetElementPtrInst should save an extra re-visit to
the newly created GEP since it won't need to cleanup after
itself.
llvm-svn: 188339
When computing the use set of a store, we need to add the store to the write
set prior to iterating over later instructions. Otherwise, if there is a later
aliasing load of that store, that load will not be tagged as a use, and bad
things will happen.
trackUsesOfI still adds later dependent stores of an instruction to that
instruction's write set, but it never sees the original instruction, and so
when tracking uses of a store, the store must be added to the write set by the
caller.
Fixes PR16834.
llvm-svn: 188329
However, opt -O2 doesn't run mem2reg directly so nobody noticed until r188146
when SROA started sending more things directly down the PromoteMemToReg path.
In order to revert r187191, I also revert dependent revisions r187296, r187322
and r188146. Fixes PR16867. Does not add the testcases from that PR, but both
of them should get added for both mem2reg and sroa when this revert gets
unreverted.
llvm-svn: 188327
Do not generate new vector values for the same entries because we know that the incoming values
from the same block must be identical.
llvm-svn: 188185
Various tests had sprung up over the years which had --check-prefix=ABC on the
RUN line, but "CHECK-ABC:" later on. This happened to work before, but was
strictly incorrect. FileCheck is getting stricter soon though.
Patch by Ron Ofir.
llvm-svn: 188173
These functions used to assume that the lsb of an integer corresponds
to vector element 0, whereas for big-endian it's the other way around:
the msb is in the first element and the lsb is in the last element.
Fixes MultiSource/Benchmarks/mediabench/gsm/toast for z.
llvm-svn: 188155
I fixed the aforementioned problems that came up on some of the linux boxes.
Major thanks to Nick Lewycky for his help debugging!
rdar://14590914
llvm-svn: 188122
This reverts commit r187941.
The commit was passing on my os x box, but it is failing on some non-osx
platforms. I do not have time to look into it now, so I am reverting and will
recommit after I figure this out.
llvm-svn: 187946
All libm floating-point rounding functions, except for round(), had their own
ISD nodes. Recent PowerPC cores have an instruction for round(), and so here I'm
adding ISD::FROUND so that round() can be custom lowered as well.
For the most part, this is straightforward. I've added an intrinsic
and a matching ISD node just like those for nearbyint() and friends. The
SelectionDAG pattern I've named frnd (because ISD::FP_ROUND has already claimed
fround).
This will be used by the PowerPC backend in a follow-up commit.
llvm-svn: 187926
Also remove checking of llvm.dbg.sp since it is not used in generating dwarf.
Current state of Finder:
DebugInfoFinder tries to list all debug info MDNodes used in a module. To
list debug info MDNodes used by an instruction, DebugInfoFinder provides
processDeclare, processValue and processLocation to handle DbgDeclareInst,
DbgValueInst and DbgLoc attached to instructions. processModule will go
through all DICompileUnits in llvm.dbg.cu and list debug info MDNodes
used by the CUs.
TODO:
1> Finder has a list of CUs, SPs, Types, Scopes and global variables. We
need to add a list of variables that are used by DbgDeclareInst and
DbgValueInst.
2> MDString fields should be null or isa<MDString> and MDNode fields should be
null or isa<MDNode>. We currently use empty string or int 0 to represent null.
3> Go though Verify functions and make sure that they check field types.
4> Clean up existing testing cases to remove llvm.dbg.sp and make sure each
testing case has a llvm.dbg.cu.
Re-apply r187609 with fix to pass ocaml binding. vmcore.ml generates a debug
location with scope being metadata !{}, in verifier we treat this as a null
scope.
llvm-svn: 187812
Function attributes are the future! So just query whether we want to realign the
stack directly from the function instead of through a random target options
structure.
llvm-svn: 187618
Also remove checking of llvm.dbg.sp since it is not used in generating dwarf.
Current state of Finder:
DebugInfoFinder tries to list all debug info MDNodes used in a module. To
list debug info MDNodes used by an instruction, DebugInfoFinder provides
processDeclare, processValue and processLocation to handle DbgDeclareInst,
DbgValueInst and DbgLoc attached to instructions. processModule will go
through all DICompileUnits in llvm.dbg.cu and list debug info MDNodes
used by the CUs.
TODO:
1> Finder has a list of CUs, SPs, Types, Scopes and global variables. We
need to add a list of variables that are used by DbgDeclareInst and
DbgValueInst.
2> MDString fields should be null or isa<MDString> and MDNode fields should be
null or isa<MDNode>. We currently use empty string or int 0 to represent null.
3> Go though Verify functions and make sure that they check field types.
4> Clean up existing testing cases to remove llvm.dbg.sp and make sure each
testing case has a llvm.dbg.cu.
llvm-svn: 187609
Call into ComputeMaskedBits to figure out which bits are set on both add
operands and determine if the value is a power-of-two-or-zero or not.
llvm-svn: 187445
It will now only convert the arguments / return value and call
the underlying function if the types are able to be bitcasted.
This avoids using fp<->int conversions that would occur before.
llvm-svn: 187444
Also always add DIType, DISubprogram and DIGlobalVariable to the list
in DebugInfoFinder without checking them, so we can verify them later
on.
llvm-svn: 187285
We used to call Verify before adding DICompileUnit to the list, and now we
remove the check and always add DICompileUnit to the list in DebugInfoFinder,
so we can verify them later on.
llvm-svn: 187237
robust. It now uses an InstVisitor and worklist to actually walk the
uses of the Alloca transitively and detect the pattern which we can
directly promote: loads & stores of the whole alloca and instructions we
can completely ignore.
Also, with this new implementation teach both the predicate for testing
whether we can promote and the promotion engine itself to use the same
code so we no longer have strange divergence between the two code paths.
I've added some silly test cases to demonstrate that we can handle
slightly more degenerate code patterns now. See the below for why this
is even interesting.
Performance impact: roughly 1% regression in the performance of SROA or
ScalarRepl on a large C++-ish test case where most of the allocas are
basically ready for promotion. The reason is because of silly redundant
work that I've left FIXMEs for and which I'll address in the next
commit. I wanted to separate this commit as it changes the behavior.
Once the redundant work in removing the dead uses of the alloca is
fixed, this code appears to be faster than the old version. =]
So why is this useful? Because the previous requirement for promotion
required a *specific* visit pattern of the uses of the alloca to verify:
we *had* to look for no more than 1 intervening use. The end goal is to
have SROA automatically detect when an alloca is already promotable and
directly hand it to the mem2reg machinery rather than trying to
partition and rewrite it. This is a 25% or more performance improvement
for SROA, and a significant chunk of the delta between it and
ScalarRepl. To get there, we need to make mem2reg actually capable of
promoting allocas which *look* promotable to SROA without have SROA do
tons of work to massage the code into just the right form.
This is actually the tip of the iceberg. There are tremendous potential
savings we can realize here by de-duplicating work between mem2reg and
SROA.
llvm-svn: 187191
Also avoid locals evicting locals just because they want a cheaper register.
Problem: MI Sched knows exactly how many registers we have and assumes
they can be colored. In cases where we have large blocks, usually from
unrolled loops, greedy coloring fails. This is a source of
"regressions" from the MI Scheduler on x86. I noticed this issue on
x86 where we have long chains of two-address defs in the same live
range. It's easy to see this in matrix multiplication benchmarks like
IRSmk and even the unit test misched-matmul.ll.
A fundamental difference between the LLVM register allocator and
conventional graph coloring is that in our model a live range can't
discover its neighbors, it can only verify its neighbors. That's why
we initially went for greedy coloring and added eviction to deal with
the hard cases. However, for singly defined and two-address live
ranges, we can optimally color without visiting neighbors simply by
processing the live ranges in instruction order.
Other beneficial side effects:
It is much easier to understand and debug regalloc for large blocks
when the live ranges are allocated in order. Yes, global allocation is
still very confusing, but it's nice to be able to comprehend what
happened locally.
Heuristics could be added to bias register assignment based on
instruction locality (think late register pairing, banks...).
Intuituvely this will make some test cases that are on the threshold
of register pressure more stable.
llvm-svn: 187139
Make sure the context and type fields are MDNodes. We will generate
verification errors if those fields are non-empty strings.
Fix testing cases to make them pass the verifier.
llvm-svn: 187106
The language reference says that:
"If a symbol appears in the @llvm.used list, then the compiler,
assembler, and linker are required to treat the symbol as if there is
a reference to the symbol that it cannot see"
Since even the linker cannot see the reference, we must assume that
the reference can be using the symbol table. For example, a user can add
__attribute__((used)) to a debug helper function like dump and use it from
a debugger.
llvm-svn: 187103
schedule an alloca for another iteration in SROA. This only showed up
with a mixture of promotable and unpromotable selects and phis. Added
a test case for this.
llvm-svn: 187031
pending speculation for a phi node. The problem here is that we were
using growth of the specluation set as an indicator of whether
speculation would occur, and if the phi node is already in the set we
don't see it grow. This is a symptom of the fact that this signal is
a total hack.
Unfortunately, I couldn't really come up with a non-hacky way of
signaling that promotion remains valid *after* speculation occurs, such
that we only speculate when all else looks good for promotion. In the
end, I went with at least a much more explicit approach of doing the
work of queuing inside the phi and select processing and setting
a preposterously named flag to convey that we're in the special state of
requiring speculating before promotion.
Thanks to Richard Trieu and Nick Lewycky for the excellent work reducing
a testcase for this from a pretty giant, nasty assert in a big
application. =] The testcase was excellent.
llvm-svn: 187029
MDNodes used by DbgDeclareInst and DbgValueInst.
Another 16 testing cases failed and they are disabled with
-disable-debug-info-verifier.
A total of 34 cases are disabled with -disable-debug-info-verifier and will be
corrected.
llvm-svn: 186902
