in llvm-objdump for Mach-O files add the printing of the
ARM_THREAD_STATE64 in the same format as
otool-classic(1) on darwin.
To do this the 64-bit ARM general tread state
needed to be defined in include/llvm/Support/MachO.h .
rdar://28985800
llvm-svn: 285967
the offsets and sizes of an element of the Mach-O file overlaps with
another element in the Mach-O file.
Some other tests for malformed Mach-O files now run into these
checks so their tests were also adjusted.
llvm-svn: 285860
Summary:
There is no point to importing at -O0, since we won't inline. We should
also disable other cross-module optimizations.
(Plan to backport this fix to the 3.9 branch to fix PR30774)
Reviewers: pcc
Subscribers: johanengelen, mehdi_amini
Differential Revision: https://reviews.llvm.org/D25918
llvm-svn: 285648
Summary:
When we have an aliasee that is linkonce, while we can't convert
the non-prevailing copies to available_externally, we still need to
convert the prevailing copy to weak. If a reference to the aliasee
is exported, not converting a copy to weak will result in undefined
references when the linkonce is removed in its original module.
Add a new test and update existing tests.
Reviewers: mehdi_amini
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D26076
llvm-svn: 285512
Most of the version of report_error were quoting the filename and
printing a colon between the file name and the error message, but this
one wasn't doing either of those. Fix the output to be more
consistent.
llvm-svn: 285252
Usage:
llvm-xray extract <object file> [-o <filename or '-'>]
The tool gets the XRay instrumentation map from an object file and turns
it into YAML. We first support ELF64 sleds on x86_64 binaries, with
provision for supporting other supported platforms and formats later.
This is the first of a many-part change to fully implement the
`llvm-xray` tool.
We also define a subcommand registration and dispatch mechanism to be
used by other further subcommand implementations for llvm-xray.
Diffusion Revision: https://reviews.llvm.org/D21987
llvm-svn: 285165
Usage:
llvm-xray extract <object file> [-o <filename or '-'>]
The tool gets the XRay instrumentation map from an object file and turns
it into YAML. We first support ELF64 sleds on x86_64 binaries, with
provision for supporting other supported platforms and formats later.
This is the first of a many-part change to fully implement the
`llvm-xray` tool.
We also define a subcommand registration and dispatch mechanism to be
used by other further subcommand implementations for llvm-xray.
llvm-svn: 285155
When we load coverage data from multiple objects, we don't have a way to
attribute a source object to a function record. Printing out the object
filename next to the source filename is already not very useful: soon,
it'll actually become misleading. Stop printing out the filename now.
llvm-svn: 285043
Summary:
Add relocations for AArch64 ILP32. Includes:
- Addition of definitions for R_AARCH32_*
- Definition of new -target-abi: ilp32
- Definition of data layout string
- Tests for added relocations. Not comprehensive, but matches
existing tests for 64-bit. Renames "CHECK-OBJ" to "CHECK-OBJ-LP64".
- Tests for llvm-readobj
Reviewers: zatrazz, peter.smith, echristo, t.p.northover
Subscribers: aemerson, rengolin, mehdi_amini
Differential Revision: https://reviews.llvm.org/D25159
llvm-svn: 284973
iterating over an archive with object and non-object members that
would cause an Abort because to was not calling consumeError()
when the code was wanting to ignore a non-object file.
Found by Justin Bogner!
llvm-svn: 284867
the ARM_THREAD_STATE in the same format as
otool-classic(1) on darwin.
Also remove an extra space in printing the initprot to make
the output match otool-classic(1) on darwin.
rdar://28851457
llvm-svn: 284852
Profile runtime can generate an empty raw profile (when there is no function in
the shared library). This empty profile is treated as a text format profile. A
test format profile without the flag of "#IR" is thought to be a clang
generated profile. So in llvm profile merging, we will get a bogus warning of
"Merge IR generated profile with Clang generated profile."
The fix here is to skip the empty profile (when the buffer size is 0) for
profile merge.
Reviewers: vsk, davidxl
Differential Revision: http://reviews.llvm.org/D25687
llvm-svn: 284659
This is just a quick utility handy for getting rough summaries of types
in a given object or dwo file. I've been using it to investigate the
amount of type info redundancy across a project build, for example.
llvm-svn: 284537
Summary:
This test is allowed to run on non-x86 hosts and thus must use
llvm-nm rather than nm.
Differential Revision: https://reviews.llvm.org/D25473
llvm-svn: 283901
Because screen space is precious, if an optimization (vectorization, for
example) never happens, don't leave empty space for the associated markers on
every line of the output. This makes the output much more compact, and allows
for the later inclusion of markers for more (although perhaps rare)
optimizations.
llvm-svn: 283626
In the left part of the reports, we have things like U<number>; if some of
these numbers use more digits than others, we don't want a space in between the
U and the start of the number. Instead, the space should come afterward. This
way it is clear that the number goes with the U and not any other optimization
indicator that might come later on the line.
llvm-svn: 283518
When there are multiple optimizations on one line, record the vectorization
factors, etc. correctly (instead of incorrectly substituting default values).
llvm-svn: 283443
How code is optimized sometimes, perhaps often, depends on the context into
which it was inlined. This change allows llvm-opt-report to track the
differences between the optimizations performed, or not, in different contexts,
and when these differ, display those differences.
For example, this code:
$ cat /tmp/q.cpp
void bar();
void foo(int n) {
for (int i = 0; i < n; ++i)
bar();
}
void quack() {
foo(4);
}
void quack2() {
foo(4);
}
will now produce this report:
< /home/hfinkel/src/llvm/test/tools/llvm-opt-report/Inputs/q.cpp
2 | void bar();
3 | void foo(int n) {
[[
> foo(int):
4 | for (int i = 0; i < n; ++i)
> quack(), quack2():
4 U4 | for (int i = 0; i < n; ++i)
]]
5 | bar();
6 | }
7 |
8 | void quack() {
9 I | foo(4);
10 | }
11 |
12 | void quack2() {
13 I | foo(4);
14 | }
15 |
Note that the tool has demangled the function names, and grouped the reports
associated with line 4. This shows that the loop on line 4 was unrolled by a
factor of 4 when inlined into the functions quack() and quack2(), but not in
the function foo(int) itself.
llvm-svn: 283402
LLVM now has the ability to record information from optimization remarks in a
machine-consumable YAML file for later analysis. This can be enabled in opt
(see r282539), and D25225 adds a Clang flag to do the same. This patch adds
llvm-opt-report, a tool to generate basic optimization "listing" files
(annotated sources with information about what optimizations were performed)
from one of these YAML inputs.
D19678 proposed to add this capability directly to Clang, but this more-general
YAML-based infrastructure was the direction we decided upon in that review
thread.
For this optimization report, I focused on making the output as succinct as
possible while providing information on inlining and loop transformations. The
goal here is that the source code should still be easily readable in the
report. My primary inspiration here is the reports generated by Cray's tools
(http://docs.cray.com/books/S-2496-4101/html-S-2496-4101/z1112823641oswald.html).
These reports are highly regarded within the HPC community. Intel's compiler,
for example, also has an optimization-report capability
(https://software.intel.com/sites/default/files/managed/55/b1/new-compiler-optimization-reports.pdf).
$ cat /tmp/v.c
void bar();
void foo() { bar(); }
void Test(int *res, int *c, int *d, int *p, int n) {
int i;
#pragma clang loop vectorize(assume_safety)
for (i = 0; i < 1600; i++) {
res[i] = (p[i] == 0) ? res[i] : res[i] + d[i];
}
for (i = 0; i < 16; i++) {
res[i] = (p[i] == 0) ? res[i] : res[i] + d[i];
}
foo();
foo(); bar(); foo();
}
D25225 adds -fsave-optimization-record (and
-fsave-optimization-record=filename), and this would be used as follows:
$ clang -O3 -o /tmp/v.o -c /tmp/v.c -fsave-optimization-record
$ llvm-opt-report /tmp/v.yaml > /tmp/v.lst
$ cat /tmp/v.lst
< /tmp/v.c
2 | void bar();
3 | void foo() { bar(); }
4 |
5 | void Test(int *res, int *c, int *d, int *p, int n) {
6 | int i;
7 |
8 | #pragma clang loop vectorize(assume_safety)
9 V4,2 | for (i = 0; i < 1600; i++) {
10 | res[i] = (p[i] == 0) ? res[i] : res[i] + d[i];
11 | }
12 |
13 U16 | for (i = 0; i < 16; i++) {
14 | res[i] = (p[i] == 0) ? res[i] : res[i] + d[i];
15 | }
16 |
17 I | foo();
18 |
19 | foo(); bar(); foo();
I | ^
I | ^
20 | }
Each source line gets a prefix giving the line number, and a few columns for
important optimizations: inlining, loop unrolling and loop vectorization. An
'I' is printed next to a line where a function was inlined, a 'U' next to an
unrolled loop, and 'V' next to a vectorized loop. These are printed on the
relevant code line when that seems unambiguous, or on subsequent lines when
multiple potential options exist (messages, both positive and negative, from
the same optimization with different column numbers are taken to indicate
potential ambiguity). When on subsequent lines, a '^' is output in the relevant
column.
Annotated source for all relevant input files are put into the listing file
(each starting with '<' and then the file name).
You can disable having the unrolling/vectorization factors appear by using the
-s flag.
Differential Revision: https://reviews.llvm.org/D25262
llvm-svn: 283398
As per the PE COFF spec (section 8.3, Import Name Type)
Offset: 18 Size 2 bits Name: Type
Offset: 20 Size 3 bits Name: Name Type
Offset: 20 added based on 18+2
Partially commited as rL279069
Differential Revision: https://reviews.llvm.org/D23540
llvm-svn: 283055
Summary:
Answering any meaningful questions about .sancov files requires
accessing symbol information from the corresponding binary.
This change introduces a separate intermediate data structure and
format: symbolized coverage. It contains all symbol information that
is required to answer common queries:
- merging
- coverd/uncovered files and functions
- line status.
Also removing the html report functionality from sancov: generated
HTML files are too huge, and a different approach is required.
Maintaining this half-working approach in the C++ is painful.
Differential Revision: https://reviews.llvm.org/D24947
llvm-svn: 282639
Summary:
As suggested in D24826, use different options for ThinLTO backend
parallelism from the option controlling regular LTO code gen
parallelism. They are already split in the LTO API, and this enables
controlling them with different clang options.
Reviewers: pcc, mehdi_amini
Subscribers: dexonsmith, llvm-commits, mehdi_amini
Differential Revision: https://reviews.llvm.org/D24873
llvm-svn: 282290
... so that they don't show up in the index. This came up because polly
contains a .git directory and some other unmapped input in its source
dir.
llvm-svn: 282282
We used to append filenames into a vector of std::string, and then
append a reference to each string into a separate vector. This made it
easier to work with the getUniqueSourceFiles API. But it's buggy.
std::string has a small-string optimization, so you can't expect to
capture a reference to one if you're copying it into a growing vector.
Add a test that triggers this invalid reference to std::string scenario,
and kill the issue with fire by just using ArrayRef<std::string>
everywhere.
llvm-svn: 282281
We've supported restricting coverage reports to a set of files for a
long time. Add support for being able to restrict by entire directories.
I suppose this supersedes D20803.
llvm-svn: 282202
With the new LTO API in r278338, we stopped emitting the individual
index files and imports files for some modules in the distributed backend
case (thinlto-index-only plugin option).
Specifically, this is when the linker decides not to include a module in the
link, because it was in an archive library and did not have a strong
reference to it. Not creating the expected output files makes the
distributed build system implementation more difficult, in terms of
checking for the expected outputs of the thin link, and scheduling the
backend jobs. To address this, the gold-plugin will write dummy empty
.thinlto.bc and .imports files for modules not included in the link
(which LTO never sees).
Augmented a gold v1.12+ test, since that version of gold has the handling
for notifying on modules not being included in the link.
llvm-svn: 282100
Summary:
Emit an empty summary section, instead of no summary section, when
there are no global variables in the index. This ensures that LTO
will treat these files as ThinLTO inputs, instead of as regular
LTO inputs.
In addition to not being what the user likely intended when
compiling with -flto=thin, the current behavior is problematic for
distributed build systems that expect to get ThinLTO index and imports
files back for each input compiled with -flto=thin. Combining into
a single regular LTO module also reduces the backend parallelism.
And in the case where the index was suppressed due to uses in
inline assembly, combining into a single LTO module could provoke
renaming of duplicates that we were trying to prevent by suppressing
the index.
This change required a couple of fixes to handle the empty summary
section.
Reviewers: mehdi_amini
Subscribers: mehdi_amini, llvm-commits, pcc
Differential Revision: https://reviews.llvm.org/D24779
llvm-svn: 282037
These are distinct statistics which are useful to look at separately.
Example: say you have a template function "foo" with 5 instantiations
and only 3 of them are covered. Then this contributes (1/1) to the total
function coverage and (3/5) to the total instantiation coverage. I.e,
the old "Function Coverage" column has been renamed to "Instantiation
Coverage", and the new "Function Coverage" aggregates information from
the various instantiations of a function.
One benefit of making this switch is that the Line and Region coverage
columns will start making sense. Let's continue the example and assume
that the 5 instantiations of "foo" cover {2, 4, 6, 8, 10} out of 10
lines respectively. The new line coverage for "foo" is (10/10), not
(30/50). The old scenario got confusing because we'd report that there
were more lines in a file than what was actually possible.
llvm-svn: 281875
Summary:
In runThinLTO we start the task numbering for ThinLTO backend
tasks depending on whether there was also a regular LTO object
(CombinedModule). However, the CombinedModule is moved at
the end of runRegularLTO, so we need to save this information and
pass it into runThinLTO. Otherwise the AddOutput callback to the client
will use the same task number for both the regular LTO object
and the first ThinLTO object, which in gold-plugin caused only
one to be end up in the output filename array and therefore passed
back to gold for the final native link.
Reviewers: pcc, mehdi_amini
Subscribers: mehdi_amini, kromanova
Differential Revision: https://reviews.llvm.org/D24643
llvm-svn: 281725
Copying in the full text of the function doesn't help at all when we
already know that it's never executed. Just say that it's unexecuted --
the relevant source text has already been printed.
llvm-svn: 281589
