On AArch64 the pseudo instruction ldr <reg>, =... supports both
32-bit and 64-bit constants. Add support for 64 bit constants for
the pools to support the pseudo instruction fully.
Changes the AArch64 ldr-pseudo tests to use 32-bit registers and
adds tests with 64-bit registers.
Patch by Janne Grunau!
Differential Revision: http://reviews.llvm.org/D4279
llvm-svn: 213387
Because i16 is illegal, there's no native DAG method to
represent a bitcast to or from an f16 type. This meant LLVM was
inserting a stack store/load pair which is really not ideal.
llvm-svn: 213378
The post-indexed instructions were missing the constraint, causing unpredictable STR instructions to be emitted.
The earlyclobber constraint on the pre-indexed STR instructions is not strictly necessary, as the instruction selection for pre-indexed STR instructions goes through an additional layer of pseudo instructions which have the constraint defined, however it doesn't hurt to specify the constraint directly on the pre-indexed instructions as well, since at some point someone might create instances of them programmatically and then the constraint is definitely needed.
This fixes PR20323.
llvm-svn: 213369
Unfortunately, we don't seem to have a direct truncation, but the
extension can be legally split into two operations so we should
support that.
llvm-svn: 213357
Clang may well start emitting these soon, and while it may not be
directly relevant for OpenCL or GLSL, the instructions were just
sitting there waiting to be used.
llvm-svn: 213356
Since the result of a SETCC for X86 is 0 or -1 in each lane, we can
move unary operations, in this case [su]int_to_fp through the mask
operation and constant fold the operation away. Generally speaking:
UNARYOP(AND(VECTOR_CMP(x,y), constant))
--> AND(VECTOR_CMP(x,y), constant2)
where constant2 is UNARYOP(constant).
This implements the transform where UNARYOP is [su]int_to_fp.
For example, consider the simple function:
define <4 x float> @foo(<4 x float> %val, <4 x float> %test) nounwind {
%cmp = fcmp oeq <4 x float> %val, %test
%ext = zext <4 x i1> %cmp to <4 x i32>
%result = sitofp <4 x i32> %ext to <4 x float>
ret <4 x float> %result
}
Before this change, the SSE code is generated as:
LCPI0_0:
.long 1 ## 0x1
.long 1 ## 0x1
.long 1 ## 0x1
.long 1 ## 0x1
.section __TEXT,__text,regular,pure_instructions
.globl _foo
.align 4, 0x90
_foo: ## @foo
cmpeqps %xmm1, %xmm0
andps LCPI0_0(%rip), %xmm0
cvtdq2ps %xmm0, %xmm0
retq
After, the code is improved to:
LCPI0_0:
.long 1065353216 ## float 1.000000e+00
.long 1065353216 ## float 1.000000e+00
.long 1065353216 ## float 1.000000e+00
.long 1065353216 ## float 1.000000e+00
.section __TEXT,__text,regular,pure_instructions
.globl _foo
.align 4, 0x90
_foo: ## @foo
cmpeqps %xmm1, %xmm0
andps LCPI0_0(%rip), %xmm0
retq
The cvtdq2ps has been constant folded away and the floating point 1.0f
vector lanes are materialized directly via the ModRM operand of andps.
llvm-svn: 213342
Since the result of a SETCC for AArch64 is 0 or -1 in each lane, we can
move unary operations, in this case [su]int_to_fp through the mask
operation and constant fold the operation away. Generally speaking:
UNARYOP(AND(VECTOR_CMP(x,y), constant))
--> AND(VECTOR_CMP(x,y), constant2)
where constant2 is UNARYOP(constant).
This implements the transform where UNARYOP is [su]int_to_fp.
For example, consider the simple function:
define <4 x float> @foo(<4 x float> %val, <4 x float> %test) nounwind {
%cmp = fcmp oeq <4 x float> %val, %test
%ext = zext <4 x i1> %cmp to <4 x i32>
%result = sitofp <4 x i32> %ext to <4 x float>
ret <4 x float> %result
}
Before this change, the code is generated as:
fcmeq.4s v0, v0, v1
movi.4s v1, #0x1 // Integer splat value.
and.16b v0, v0, v1 // Mask lanes based on the comparison.
scvtf.4s v0, v0 // Convert each lane to f32.
ret
After, the code is improved to:
fcmeq.4s v0, v0, v1
fmov.4s v1, #1.00000000 // f32 splat value.
and.16b v0, v0, v1 // Mask lanes based on the comparison.
ret
The svvtf.4s has been constant folded away and the floating point 1.0f
vector lanes are materialized directly via fmov.4s.
Rather than do the folding manually in the target code, teach getNode()
in the generic SelectionDAG to handle folding constant operands of
vector [su]int_to_fp nodes. It is reasonable (as noted in a FIXME) to do
additional constant folding there as well, but I don't have test cases
for those operations, so leaving them for another time when it becomes
appropriate.
rdar://17693791
llvm-svn: 213341
Options struct and move the comment to inMips16HardFloat. Use the
fact that we now know whether or not we cared about soft float to
set the libcalls.
Accordingly rename mipsSEUsesSoftFloat to abiUsesSoftFloat and
propagate since it's no longer CPU specific.
llvm-svn: 213335
We now consider the FPOpFusion flag when determining whether
to fuse ops. We also explicitly emit add.rn when fusion is
disabled to prevent ptxas from fusing the operations on its
own.
llvm-svn: 213287
There are two parts here. First is to modify tablegen to adjust the encoding
type ENCODING_RM with the scaling factor.
The second is to use the new encoding types to compute the correct
displacement in the decoder.
Fixes <rdar://problem/17608489>
llvm-svn: 213281
Passes the computed scaling factor in TSFlags rather than the old attributes.
Also removes the C++ version of computing the scaling factor (MemObjSize)
along with the asserts added by the previous patch.
No functional change.
llvm-svn: 213279
This does not actually move the logic yet but reimplements it in the Tablegen
language. Then asserts that the new implementation results in the same value.
The next patch will remove the assert and the temporary use of the TSFlags and
remove the C++ implementation.
The formula requires a limited form of the logical left and right operators.
I implemented these with the bit-extract/insert operator (i.e. blah{bits}).
No functional change.
llvm-svn: 213278
This also uses TSFlags to mark machine instructions that are surface/texture
accesses, as well as the vector width for surface operations. This is used
to simplify some of the switch statements that need to detect surface/texture
instructions
llvm-svn: 213256
Previously we asserted on this code. Currently compiler-rt doesn't
actually implement any of these new libcalls, but external help is
pretty much the only viable option for LLVM.
I've followed the much more generic "__truncST2" naming, as opposed to
the odd name for f32 -> f16 truncation. This can obviously be changed
later, or overridden by any targets that need to.
llvm-svn: 213252
x86 has no native ability to extend an f16 to f64, but the same result
is obtained if we expand it into two separate extensions: f16 -> f32
-> f64.
Unfortunately the same is not true for truncate, so that still results
in a compilation failure.
llvm-svn: 213251
This makes the two intrinsics @llvm.convert.from.f16 and
@llvm.convert.to.f16 accept types other than simple "float". This is
only strictly needed for the truncate operation, since otherwise
double rounding occurs and there's no way to represent the strict IEEE
conversion. However, for symmetry we allow larger types in the extend
too.
During legalization, we can expand an "fp16_to_double" operation into
two extends for convenience, but abort when the truncate isn't legal. A new
libcall is probably needed here.
Even after this commit, various target tweaks are needed to actually use the
extended intrinsics. I've put these into separate commits for clarity, so there
are no actual tests of f64 conversion here.
llvm-svn: 213248
Memory barrier __builtin_arm_[dmb, dsb, isb] intrinsics are required to
implement their corresponding ACLE and MSVC intrinsics.
This patch ports ARM dmb, dsb, isb intrinsic to AArch64.
Differential Revision: http://reviews.llvm.org/D4520
llvm-svn: 213247
Summary:
Generally speaking, mips-* vs mips64-* should not be used to make decisions
about the content or format of the ELF. This should be based on the ABI
and CPU in use. For example, `mips-linux-gnu-clang -mips64r2 -mabi=64`
should produce an ELF64 as should `mips64-linux-gnu-clang -mabi=64`.
Conversely, `mips64-linux-gnu-clang -mabi=n32` should produce an ELF32 as
should `mips-linux-gnu-clang -mips64r2 -mabi=n32`.
This patch fixes the e_flags but leaves the ELF32 vs ELF64 issue for now
since there is no apparent way to base this decision on the ABI and CPU.
Differential Revision: http://reviews.llvm.org/D4539
llvm-svn: 213244
Summary:
The cpr1_size field describes the minimum register width to run the program
rather than the size of the registers on the target. MIPS32r6 was acting
as if -mfp64 has been given because it starts off with 64-bit FPU registers.
Differential Revision: http://reviews.llvm.org/D4538
llvm-svn: 213243
Summary:
These options are not implemented yet but we act as if they are always
given.
The integrated assembler is driven by the clang driver so the e_flag test
cases should match the e_flags emitted by GCC+GAS rather than GAS
by itself.
Differential Revision: http://reviews.llvm.org/D4536
llvm-svn: 213242
We were not considering the stated alignment on vector loads/stores,
leading us to generate vector instructions even when we do not have
sufficient alignment.
Now, for IR like:
%1 = load <4 x float>, <4 x float>* %ptr, align 4
we will generate correct, conservative PTX like:
ld.f32 ... [%ptr]
ld.f32 ... [%ptr+4]
ld.f32 ... [%ptr+8]
ld.f32 ... [%ptr+12]
Or if we have an alignment of 8 (for example), we can
generate code like:
ld.v2.f32 ... [%ptr]
ld.v2.f32 ... [%ptr+8]
llvm-svn: 213186
It turns out that in most cases (the main exception being i1-related
types) once these operations are formed we cannot separate them and
the targets end up having to deal with them whether they want to or
not.
This is not a good situation, and a more reasonable default can be
formed by ackowledging this and having targets leave them as Legal.
Only x86 seems to be affected (other targets don't even try marking
the operation Expand).
Mostly there's no visible change here yet, but it will be useful to
have truly expanded EXTLOADS for MVT::f16 softening support.
llvm-svn: 213162
Summary:
A few instructions (mostly cvt.d.w and similar) are causing problems with
-mfp64 and -mno-odd-spreg and it looks like fixing it properly may
take several weeks. In the meantime, let's disable the odd-numbered
double-precision registers so that the generated code is at least valid.
The problem is that instructions like cvt.d.w read from the 32-bit low
subregister of a double-precision FPU register. This often leads to the compiler
to inserting moves to transfer a GPR32 to a FGR32 using mtc1. Such moves
violate the rules against 32-bit writes to odd-numbered FPU registers imposed
by -mno-odd-spreg. By disabling the odd-numbered double-precision registers, it
becomes impossible for the 32-bit low subregister to be odd-numbered.
This fixes numerous test-suite failures when compiling for the FP64A ABI
('-mfp64 -mno-odd-spreg'). There is no LLVM test case because it's difficult to
test that odd-numbered FPU registers are not allocatable. Instead, we depend on
the assembler (GAS and -fintegrated-as) raising errors when the rules are
violated.
Differential Revision: http://reviews.llvm.org/D4532
llvm-svn: 213160
Before this change, method 'isShuffleMaskLegal' didn't know that shuffles
implementing a 'movhlps' operation were perfectly legal for SSE targets.
This patch adds the missing check for 'isMOVHLPSMask' inside method
'isShuffleMaskLegal' to fix the problem.
The reason why it is important to do this is because the DAGCombiner
conservatively avoids combining a pair of shuffles if the resulting shuffle
node has an illegal mask. Before this patch, shuffles with a MOVHLPS mask were
wrongly considered not to be legal. This was the root cause of some poor-code
generation bugs.
llvm-svn: 213137
