1. Create a utility function normalizeEdgeWeights() in MachineBranchProbabilityInfo that normalizes a list of edge weights so that the sum of then can fit in uint32_t.
2. Provide an interface in MachineBasicBlock to normalize its successors' weights.
3. Add a flag in MachineBasicBlock that tracks whether its successors' weights are normalized.
4. Provide an overload of getSumForBlock that accepts a non-const pointer to a MBB so that it can force normalizing this MBB's successors' weights.
5. Update several uses of getSumForBlock() by eliminating the once needed weight scale.
Differential Revision: http://reviews.llvm.org/D11442
llvm-svn: 244154
Summary:
This is useful for PNaCl's `RewriteAtomics` pass. NaCl intrinsics don't exist for some of the more exotic RMW instructions, so by refactoring this function into its own, `RewriteAtomics` can share code rewriting those atomics with `AtomicExpand` while additionally saving a few cycles by generating the `cmpxchg` NaCl-specific intrinsic with the callback. Without this patch, `RewriteAtomics` would require two extra passes over functions, by first requiring use of the full `AtomicExpand` pass to just expand the leftover exotic RMWs and then running itself again to expand resulting `cmpxchg`s.
NFC
Reviewers: jfb
Subscribers: jfb, llvm-commits
Differential Revision: http://reviews.llvm.org/D11422
llvm-svn: 243880
Summary:
Modify the cost calculation function for interleaved accesses
to use the target-specific costs for insert/extract element and
memory operations.
This better models the case where the backend can't match
the interleaved group, and we are forced to use a wide load
and shuffle vectors.
Interleaved accesses are not enabled by default, so this shouldn't
cause a performance change.
Reviewers: jmolloy
Subscribers: jmolloy, llvm-commits
Differential Revision: http://reviews.llvm.org/D11718
llvm-svn: 243875
Change `DIELoc` and `DIEBlock` to stop inheriting from `DIE`, instead
inheriting from `DIEValueList` to share the value storage API. This
awkward bit of code-sharing was also fairly confusing: neither `DIELoc`
nor `DIEBlock` represents a `DIE`, so why would they inherit from it?
Aside from the API cleanup, this should improve debug info memory usage
in the backend, since it shaves five pointers off of every `DIELoc` and
`DIEBlock`. I haven't bothered to measure the savings, though.
llvm-svn: 243858
Rewrite `DIEValueList` as a subclass of `DIE`, renaming its API to match
`DIE`'s. This is preparation for changing `DIEBlock` and `DIELoc` to
stop inheriting from `DIE` and inherit directly from `DIEValueList`.
I thought about leaving this as a has-a relationship (and changing
`DIELoc` and `DIEBlock` to also have-a `DIEValueList`), but that seemed
to require a fair bit more boilerplate and I think it needed more
changes to the `DwarfUnit` API than this will.
No functionality change intended here.
llvm-svn: 243854
This commit fixes a bug in the class 'SIInstrInfo' where the implicit register
machine operands were added to a machine instruction in an incorrect order -
the implicit uses were added before the implicit defs.
I found this bug while working on moving the implicit register operand
verification code from the MIR parser to the machine verifier.
This commit also makes the method 'addImplicitDefUseOperands' in the machine
instruction class public so that it can be reused in the 'SIInstrInfo' class.
Reviewers: Matt Arsenault
Differential Revision: http://reviews.llvm.org/D11689
llvm-svn: 243799
The 'common' section TLS is not implemented.
Current C/C++ TLS variables are not placed in common section.
DWARF debug info to get the address of TLS variables is not generated yet.
clang and driver changes in http://reviews.llvm.org/D10524
Added -femulated-tls flag to select the emulated TLS model,
which will be used for old targets like Android that do not
support ELF TLS models.
Added TargetLowering::LowerToTLSEmulatedModel as a target-independent
function to convert a SDNode of TLS variable address to a function call
to __emutls_get_address.
Added into lib/Target/*/*ISelLowering.cpp to call LowerToTLSEmulatedModel
for TLSModel::Emulated. Although all targets supporting ELF TLS models are
enhanced, emulated TLS model has been tested only for Android ELF targets.
Modified AsmPrinter.cpp to print the emutls_v.* and emutls_t.* variables for
emulated TLS variables.
Modified DwarfCompileUnit.cpp to skip some DIE for emulated TLS variabls.
TODO: Add proper DIE for emulated TLS variables.
Added new unit tests with emulated TLS.
Differential Revision: http://reviews.llvm.org/D10522
llvm-svn: 243438
Summary:
The previous way of overriding it was relying on calling "setDefault"
on the global registry, which implies global mutable state.
Reviewers: echristo, atrick
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D11538
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 243388
Summary:
This function is not used in this change but will be used in a
subsequent change.
Reviewers: mcrosier, chandlerc
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D9180
llvm-svn: 243347
This commit serializes the references from the machine basic blocks to the
unnamed basic blocks.
This commit adds a new attribute to the machine basic block's YAML mapping
called 'ir-block'. This attribute contains the actual reference to the
basic block.
Reviewers: Duncan P. N. Exon Smith
llvm-svn: 243340
This commit serializes the callee saved information from the class
'MachineFrameInfo'. This commit extends the YAML mappings for the fixed and
the ordinary stack objects and adds an optional 'callee-saved-register'
attribute. This attribute is used to serialize the callee save information.
llvm-svn: 243173
This commit serializes the virtual register allocations hints of type 0.
These hints specify the preferred physical registers for allocations.
llvm-svn: 243156
This commit implements the initial serialization of machine constant pools and
the constant pool index machine operands. The constant pool is serialized using
a YAML sequence of YAML mappings that represent the constant values.
The target-specific constant pool items aren't serialized by this commit.
Reviewers: Duncan P. N. Exon Smith
llvm-svn: 242707
llvm.eh.sjlj.setjmp was used as part of the SjLj exception handling
style but is also used in clang to implement __builtin_setjmp. The ARM
backend needs to output additional dispatch tables for the SjLj
exception handling style, these tables however can't be emitted if
llvm.eh.sjlj.setjmp is simply used for __builtin_setjmp and no actual
landing pad blocks exist.
To solve this issue a new llvm.eh.sjlj.setup_dispatch intrinsic is
introduced which is used instead of llvm.eh.sjlj.setjmp in the SjLj
exception handling lowering, so we can differentiate between the case
where we actually need to setup a dispatch table and the case where we
just need the __builtin_setjmp semantic.
Differential Revision: http://reviews.llvm.org/D9313
llvm-svn: 242481
Empty subranges are not allowed in a LiveInterval and must be removed
instead: Check this in the verifiers, put a reminder for this in the
comment of the shrinkToUses variant for a single lane and make it
automatic for the shrinkToUses variant for a LiveInterval.
llvm-svn: 242431
The benefit of turning the parameter of LoopInfo::analyze() to const& is that it now can accept a rvalue.
http://reviews.llvm.org/D11250
llvm-svn: 242426
This adds new intrinsics "*absdiff" for absolute difference ops to facilitate efficient code generation for "sum of absolute differences" operation.
The patch also contains the introduction of corresponding SDNodes and basic legalization support.Sanity of the generated code is tested on X86.
This is 1st of the three patches.
Patch by Shahid Asghar-ahmad!
llvm-svn: 242409
Summary:
This change is part of a series of commits dedicated to have a single
DataLayout during compilation by using always the one owned by the
module.
This patch is quite boring overall, except for some uglyness in
ASMPrinter which has a getDataLayout function but has some clients
that use it without a Module (llmv-dsymutil, llvm-dwarfdump), so
some methods are taking a DataLayout as parameter.
Reviewers: echristo
Subscribers: yaron.keren, rafael, llvm-commits, jholewinski
Differential Revision: http://reviews.llvm.org/D11090
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 242386
Summary:
This change is part of a series of commits dedicated to have a single
DataLayout during compilation by using always the one owned by the
module.
Reviewers: echristo
Subscribers: yaron.keren, rafael, llvm-commits, jholewinski
Differential Revision: http://reviews.llvm.org/D11079
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 242385
Summary:
Because llvm-dsymutil is using ASMPrinter without any MachineFunction
of Module available.
This change is part of a series of commits dedicated to have a single
DataLayout during compilation by using always the one owned by the
module.
Reviewers: echristo
Subscribers: yaron.keren, rafael, llvm-commits
Differential Revision: http://reviews.llvm.org/D11078
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 242384
The jump table info is serialized using a YAML mapping that contains its kind
and a YAML sequence of jump table entries. A jump table entry is a YAML mapping
that has an ID and an inline YAML sequence of machine basic block references.
The testcase 'CodeGen/MIR/X86/jump-table-info.mir' doesn't have any instructions
because one of them contains a jump table index operand. The jump table index
operands will be serialized in a follow up patch, and the appropriate
instructions will be added to this testcase.
Reviewers: Duncan P. N. Exon Smith
llvm-svn: 242357
This commit serializes the references to the named LLVM alloca instructions from
the stack objects in the machine frame info. This commit adds a field 'Name' to
the struct 'yaml::MachineStackObject'. This new field is used to store the name
of the alloca instruction when the alloca is present and when it has a name.
llvm-svn: 242339
MachineCombiner predicated its use of scheduling-based metrics on
hasInstrSchedModel(), but useful conclusions can be drawn from pipeline
itineraries as well. Almost all of the logic (except for resource tracking in
preservesResourceLen) can be used if we have an itinerary, so enable it in that
case as well.
This will be used by the PowerPC backend in an upcoming commit.
llvm-svn: 242277
SelectionDAG already had begin/end methods for iterating over all
the nodes, but didn't define an iterator_range for us in foreach
loops.
This adds such a method and uses it in some of the eligible places
throughout the backends.
llvm-svn: 242212
There was a 32-bit padding gap between 'unsigned short NumOperands, NumValues;' and 'DebugLoc debugLoc. Move 'unsigned IROrder' in to that gap.
This trims the size of SDNode's from 76 bytes (really 80 due to alignment) to 72 bytes.
llvm-svn: 242211
Summary:
Before this change, personality directives were not emitted
if there was no invoke left in the function (of course until
recently this also meant that we couldn't know what
the personality actually was). This patch forces personality directives
to still be emitted, unless it is known to be a noop in the absence of
invokes, or the user explicitly specified `nounwind` (and not
`uwtable`) on the function.
Reviewers: majnemer, rnk
Subscribers: rnk, llvm-commits
Differential Revision: http://reviews.llvm.org/D10884
llvm-svn: 242185
We have a detailed def/use lists for every physical register in
MachineRegisterInfo anyway, so there is little use in maintaining an
additional bitset of which ones are used.
Removing it frees us from extra book keeping. This simplifies
VirtRegMap.
Differential Revision: http://reviews.llvm.org/D10911
llvm-svn: 242173
Do not use MachineRegisterInfo::setPhysRegUsed()/isPhysRegUsed()
anymore. This bitset changes function-global state and is set by the
VirtRegRewriter anyway.
Simply use a bitvector private to RAGreedy.
Differential Revision: http://reviews.llvm.org/D10910
llvm-svn: 242169
This changes TargetFrameLowering::processFunctionBeforeCalleeSavedScan():
- Rename the function to determineCalleeSaves()
- Pass a bitset of callee saved registers by reference, thus avoiding
the function-global PhysRegUsed bitset in MachineRegisterInfo.
- Without PhysRegUsed the implementation is fine tuned to not save
physcial registers which are only read but never modified.
Related to rdar://21539507
Differential Revision: http://reviews.llvm.org/D10909
llvm-svn: 242165
This commit serializes the fixed stack objects, including fixed spill slots.
The fixed stack objects are serialized using a YAML sequence of YAML inline
mappings. Each mapping has the object's ID, type, size, offset, and alignment.
The objects that aren't spill slots also serialize the isImmutable and isAliased
flags.
The fixed stack objects are a part of the machine function's YAML mapping.
Reviewers: Duncan P. N. Exon Smith
llvm-svn: 242045