and diretory.
Also cleans up all the associated naming to be consistent and removes
the public access to the pass ID which was unused in LLVM.
Also runs clang-format over parts that changed, which generally cleans
up a bunch of formatting.
This is in preparation for doing some internal cleanups to the pass.
Differential Revision: https://reviews.llvm.org/D47352
llvm-svn: 336028
Summary:
MemoryPhis now have APIs analogous to BB Phis to remove an incoming value/block.
The MemorySSAUpdater uses the above APIs when updating MemorySSA given a set of dead blocks about to be deleted.
Reviewers: george.burgess.iv
Subscribers: sanjoy, jlebar, Prazek, llvm-commits
Differential Revision: https://reviews.llvm.org/D48396
llvm-svn: 336015
Extends the CFGPrinter and CallPrinter with heat colors based on heuristics or
profiling information. The colors are enabled by default and can be toggled
on/off for CFGPrinter by using the option -cfg-heat-colors for both
-dot-cfg[-only] and -view-cfg[-only]. Similarly, the colors can be toggled
on/off for CallPrinter by using the option -callgraph-heat-colors for both
-dot-callgraph and -view-callgraph.
Patch by Rodrigo Caetano Rocha!
Differential Revision: https://reviews.llvm.org/D40425
llvm-svn: 335996
Initial patch adding assembly support for Armv8.4-A.
Besides adding v8.4 as a supported architecture to the usual places, this also
adds target features for the different crypto algorithms. Armv8.4-A introduced
new crypto algorithms, made them optional, and allows different combinations:
- none of the v8.4 crypto functions are supported, which is independent of the
implementation of the Armv8.0 SHA1 and SHA2 instructions.
- the v8.4 SHA512 and SHA3 support is implemented, in this case the Armv8.0
SHA1 and SHA2 instructions must also be implemented.
- the v8.4 SM3 and SM4 support is implemented, which is independent of the
implementation of the Armv8.0 SHA1 and SHA2 instructions.
- all of the v8.4 crypto functions are supported, in this case the Armv8.0 SHA1
and SHA2 instructions must also be implemented.
The v8.4 crypto instructions are added to AArch64 only, and not AArch32,
and are made optional extensions to Armv8.2-A.
The user-facing Clang options will map on these new target features, their
naming will be compatible with GCC and added in follow-up patches.
The Armv8.4-A instruction sets can be downloaded here:
https://developer.arm.com/products/architecture/a-profile/exploration-tools
Differential Revision: https://reviews.llvm.org/D48625
llvm-svn: 335953
This change adds experimental support for SHT_RELR sections, proposed
here: https://groups.google.com/forum/#!topic/generic-abi/bX460iggiKg
Definitions for the new ELF section type and dynamic array tags, as well
as the encoding used in the new section are all under discussion and are
subject to change. Use with caution!
Author: rahulchaudhry
Differential Revision: https://reviews.llvm.org/D47919
llvm-svn: 335922
The format string for formatv allows to specify a custom padding
character instead of the default space. This custom character was
parsed correctly, but not passed on to the formatter.
Patch by Marcel Köppe
Differential Revision: https://reviews.llvm.org/D48140
llvm-svn: 335915
Summary:
The InlinerFunctionImportStats will collect and dump stats regarding how
many function inlined into the module were imported by ThinLTO.
Reviewers: wmi, dexonsmith
Subscribers: mehdi_amini, inglorion, llvm-commits, eraman
Differential Revision: https://reviews.llvm.org/D48729
llvm-svn: 335914
FileOutputBuffer creates a temp file and on commit atomically
renames the temp file to the destination file. Sometimes we
want to modify an existing file in place, but still have the
atomicity guarantee. To do this we can initialize the contents
of the temp file from the destination file (if it exists), that
way the resulting FileOutputBuffer can have only selective
bytes modified. Committing will then atomically replace the
destination file as desired.
llvm-svn: 335902
Targets should be able to define whether or not they support the outliner
without the outliner being added to the pass pipeline. Before this, the
outliner pass would be added, and ask the target whether or not it supports the
outliner.
After this, it's possible to query the target in TargetPassConfig, before the
outliner pass is created. This ensures that passing -enable-machine-outliner
will not modify the pass pipeline of any target that does not support it.
https://reviews.llvm.org/D48683
llvm-svn: 335887
Add NoTrapAfterNoreturn target option which skips emission of traps
behind noreturn calls even if TrapUnreachable is enabled.
Enable the feature on Mach-O to save code size; Comments suggest it is
not possible to enable it for the other users of TrapUnreachable.
rdar://41530228
DifferentialRevision: https://reviews.llvm.org/D48674
llvm-svn: 335877
This pass is being added in order to make the information available to BasicAA,
which can't do caching of this information itself, but possibly this information
may be useful for other passes.
Incorporates code based on Daniel Berlin's implementation of Tarjan's algorithm.
Differential Revision: https://reviews.llvm.org/D47893
llvm-svn: 335857
Summary:
This allows the implicit ArrayRef conversions to kick in when e.g.
comparing ArrayRef to a SmallVector.
Reviewers: zturner, dblaikie
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D48632
llvm-svn: 335839
=== Generating the CG Profile ===
The CGProfile module pass simply gets the block profile count for each BB and scans for call instructions. For each call instruction it adds an edge from the current function to the called function with the current BB block profile count as the weight.
After scanning all the functions, it generates an appending module flag containing the data. The format looks like:
```
!llvm.module.flags = !{!0}
!0 = !{i32 5, !"CG Profile", !1}
!1 = !{!2, !3, !4} ; List of edges
!2 = !{void ()* @a, void ()* @b, i64 32} ; Edge from a to b with a weight of 32
!3 = !{void (i1)* @freq, void ()* @a, i64 11}
!4 = !{void (i1)* @freq, void ()* @b, i64 20}
```
Differential Revision: https://reviews.llvm.org/D48105
llvm-svn: 335794
The code to emit the pieces of the MSF file were actually in
PDBFileBuilder. Move this to MSFBuilder so that we can
theoretically emit an MSF without having a PDB file.
llvm-svn: 335789
Summary:
The instantiation of the drop_begin function template usually fails because the functions begin() and end() do not exist. Only when using on a container from the std namespace (or `llvm::iterator_range`s of something derived from `std::iterator`), they are matched to std::begin() and std::end() due to Koenig-lookup.
Explicitly use llvm::adl_begin and llvm::adl_end to make drop_begin applicable to anything iterable (including C-style arrays).
A solution for general `llvm::iterator_range`s was already tried in r244620, but got reverted in r244621 due to MSVC not liking it.
Reviewers: dblaikie, grosbach, aaron.ballman, ruiu
Reviewed By: dblaikie, aaron.ballman
Subscribers: aaron.ballman, llvm-commits
Differential Revision: https://reviews.llvm.org/D48598
llvm-svn: 335772
Now that we have the ability to legalize based on MMO's. Add support for
legalizing based on AtomicOrdering and use it to correct the legalization
of the atomic instructions.
Also extend all() to be a variadic template as this ruleset now requires
3 and 4 argument versions.
llvm-svn: 335767
Summary:
Rather than just print the GUID, when it is available in the index,
print the global name as well in the function import thin link debug
messages. Names will be available when the combined index is being
built by the same process, e.g. a linker or "llvm-lto2 run".
Reviewers: davidxl
Subscribers: mehdi_amini, inglorion, eraman, steven_wu, llvm-commits
Differential Revision: https://reviews.llvm.org/D48612
llvm-svn: 335760
If you've already loaded an IRObjectFile and need access to the
Modules themselves you shouldn't have to reparse a byte stream to do
it. Adds an accessor for the modules in IRObjectFile.
llvm-svn: 335759
It isn't safe to outline sequences of instructions where x16/x17/nzcv live
across the sequence.
This teaches the outliner to check whether or not a specific canidate has
x16/x17/nzcv live across it and discard the candidate in the case that that is
true.
https://bugs.llvm.org/show_bug.cgi?id=37573https://reviews.llvm.org/D47655
llvm-svn: 335758
I think the intrinsics named 'avx512.mask.' should refer to the previous behavior of taking a mask argument in the intrinsic instead of using a 'select' or 'and' instruction in IR to accomplish the masking. This is more consistent with the goal that eventually we will have no intrinsics that have masking builtin. When we reach that goal, we should have no intrinsics named "avx512.mask".
llvm-svn: 335744
This patch adds support for the q versions of the dup
(load-to-all-lanes) NEON intrinsics, such as vld2q_dup_f16() for
example.
Currently, non-q versions of the dup intrinsics are implemented
in clang by generating IR that first loads the elements of the
structure into the first lane with the lane (to-single-lane)
intrinsics, and then propagating it other lanes. There are at
least two problems with this approach. First, there are no
double-spaced to-single-lane byte-element instructions. For
example, there is no such instruction as 'vld2.8 { d0[0], d2[0]
}, [r0]'. That means we cannot rely on the to-single-lane
intrinsics and instructions to implement the q versions of the
dup intrinsics. Note that to-all-lanes instructions do support
all sizes of data items, including bytes.
The second problem with the current approach is that we need a
separate vdup instruction to propagate the structure to each
lane. So for vld4q_dup_f16() we would need four vdup instructions
in addition to the initial vld instruction.
This patch introduces dup LLVM intrinsics and reworks handling of
the currently supported (non-q) NEON dup intrinsics to expand
them into those LLVM intrinsics, thus eliminating the need for
using to-single-lane intrinsics and instructions.
Additionally, this patch adds support for u64 and s64 dup NEON
intrinsics. These are marked as Arch64-only in the ARM NEON
Reference, but it seems there are no reasons to not support them
in AArch32 mode. Please correct, if that is wrong.
That's what we generate with this patch applied:
vld2q_dup_f16:
vld2.16 {d0[], d2[]}, [r0]
vld2.16 {d1[], d3[]}, [r0]
vld3q_dup_f16:
vld3.16 {d0[], d2[], d4[]}, [r0]
vld3.16 {d1[], d3[], d5[]}, [r0]
vld4q_dup_f16:
vld4.16 {d0[], d2[], d4[], d6[]}, [r0]
vld4.16 {d1[], d3[], d5[], d7[]}, [r0]
Differential Revision: https://reviews.llvm.org/D48439
llvm-svn: 335733
https://reviews.llvm.org/D47566
Change wording from "Must be backwards compatible" to
"Must match hardware definition" for enums that are
defined by hardware.
llvm-svn: 335705
LLJIT is a prefabricated ORC based JIT class that is meant to be the go-to
replacement for MCJIT. Unlike OrcMCJITReplacement (which will continue to be
supported) it is not API or bug-for-bug compatible, but targets the same
use cases: Simple, non-lazy compilation and execution of LLVM IR.
LLLazyJIT extends LLJIT with support for function-at-a-time lazy compilation,
similar to what was provided by LLVM's original (now long deprecated) JIT APIs.
This commit also contains some simple utility classes (CtorDtorRunner2,
LocalCXXRuntimeOverrides2, JITTargetMachineBuilder) to support LLJIT and
LLLazyJIT.
Both of these classes are works in progress. Feedback from JIT clients is very
welcome!
llvm-svn: 335670
This addresses post-commit feedback about the name 'skipDebugInfo' being
misleading. This name could be interpreted as meaning 'a function that
skips instructions with debug locations'.
The new name, 'skipDebugIntrinsics', makes it clear that this function
only skips debug info intrinsics.
Thanks to Adrian Prantl for pointing this out!
llvm-svn: 335667
It is legal for a PHI node not to have a live value in a predecessor
as long as the end of the predecessor is jointly dominated by an undef
value.
llvm-svn: 335607
Summary:
Adds assembly parsing support for the module summary index (follow on
to r333335 which added the assembly writing support).
I added support to llvm-as to invoke the index parsing, so that it can
create either a bitcode file with a Module and a per-module index, or
a combined index without a Module.
I will send follow on patches soon to do the following:
- add support to tools such as llvm-lto2 to parse the per-module indexes
from assembly instead of bitcode when testing the thin link.
- verification support.
Depends on D47844 and D47842.
Reviewers: pcc, dexonsmith, mehdi_amini
Subscribers: inglorion, eraman, steven_wu, llvm-commits
Differential Revision: https://reviews.llvm.org/D47905
llvm-svn: 335602
Summary:
This is a follow-up to r334830 and r335031.
In the valueCoversEntireFragment check we now also handle
the situation when there is a variable length array (VLA)
involved, and the length of the array has been reduced to
a constant.
The ConvertDebugDeclareToDebugValue functions that are related
to PHI nodes and load instructions now avoid inserting dbg.value
intrinsics when the value does not, for certain, cover the
variable/fragment that should be described.
In r334830 we assumed that the value always covered the entire
var/fragment and we had assertions in the code to show that
assumption. However, those asserts failed when compiling code
with VLAs, so we removed the asserts in r335031. Now when we
know that the valueCoversEntireFragment check can fail also for
PHI/Load instructions we avoid to insert the faulty dbg.value
intrinsic in such situations. Compared to the Store instruction
scenario we simply drop the dbg.value here (as the variable does
not change its value due to PHI/Load, so an earlier dbg.value
describing the variable should still be valid).
Reviewers: aprantl, vsk, efriedma
Reviewed By: aprantl
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D48547
llvm-svn: 335580
Summary:
Adds a string saver to the ModuleSummaryIndex so it can store value
names in the case of adding a ValueInfo for a GUID when we don't
have the name stored in a Module string table. This is motivated
by the upcoming summary parser patch, where we will read value names
from the summary entry and want to store them, even when a Module
is not available.
Currently this allows us to store the name in the legacy bitcode case,
and I have added a test to show that.
Reviewers: pcc, dexonsmith
Subscribers: mehdi_amini, inglorion, eraman, steven_wu, llvm-commits
Differential Revision: https://reviews.llvm.org/D47842
llvm-svn: 335570
This recommits r335562 and 335563 as a single commit.
The frontend will surround the intrinsic with the appropriate marshalling to/from a scalar type to match the sigature of the builtin that software expects.
By exposing the vXi1 type directly in the llvm intrinsic we make it available to optimizers much earlier. This can enable the scalar marshalling code to be optimized away.
llvm-svn: 335568
Summary:
Without this change we only add module paths to the combined index when
there is a module hash or at least one global value. Make this more
consistent by adding the module to the index whenever there is a summary
section, and it is a per-module summary (had a MODULE_CODE_SOURCE_FILENAME
record).
Since we will no longer add module paths lazily, add a new interface to get
the module info from the index that asserts it is already added.
Fixes PR37899.
Reviewers: Vlad, pcc
Subscribers: mehdi_amini, inglorion, steven_wu, llvm-commits
Differential Revision: https://reviews.llvm.org/D48511
llvm-svn: 335567