This patch adds support for YAML<->DWARF for debug_info sections.
This re-lands r290147, reverted in 290148, re-landed in r290204 after fixing the issue that caused bots to fail (thank you UBSan!), and reverted again in r290209 due to failures on big endian systems.
After adding support for preserving endianness, this should be good now.
llvm-svn: 290386
Each function summary has an attached list of type identifier GUIDs. The
idea is that during the regular LTO phase we would match these GUIDs to type
identifiers defined by the regular LTO module and store the resolutions in
a top-level "type identifier summary" (which will be implemented separately).
Differential Revision: https://reviews.llvm.org/D27967
llvm-svn: 290280
This sets USES_TERMINAL for the native llvm-config build, so that it
doesn't run at the same time as builds of other native tools (namely,
tablegen). Without this, if you're very unlucky with the timing it's
possible to be relinking libSupport as one of the tools is linking,
causing a spurious failure.
The tablegen build adopted USES_TERMINAL for this same reason in
r280748.
llvm-svn: 290271
This patch adds support for YAML<->DWARF for debug_info sections.
This re-lands r290147, after fixing the issue that caused bots to fail (thank you UBSan!).
llvm-svn: 290204
DWARF 4 and later supports encoding the PC as an address or as as offset from the low PC. Clients using DWARFDie should be insulated from how to extract the high PC value. This function takes care of extracting the form value and looking for the correct form.
Differential Revision: https://reviews.llvm.org/D27885
llvm-svn: 290131
The Mach-O command line flag like "-arch armv7m" does not match the
arch name part of its llvm Triple which is "thumbv7m-apple-darwin”.
I think the best way to fix this is to have
llvm::object::MachOObjectFile::getArchTriple() optionally return the
name of the Mach-O arch flag that would be used with -arch that
matches the CPUType and CPUSubType. Then change
llvm::object::MachOUniversalBinary::ObjectForArch::getArchTypeName()
to use that and change it to getArchFlagName() as the type name is
really part of the Triple and the -arch flag name is a Mach-O thing
for a specific Triple with a specific Mcpu value.
rdar://29663637
llvm-svn: 290001
This is the 3rd of 3 patches to get reading and writing of
CodeView symbol and type records to use a single codepath.
Differential Revision: https://reviews.llvm.org/D26427
llvm-svn: 289978
Summary: ThinLTO needs to invoke SampleProfileLoader pass during link time in order to annotate profile correctly after module importing.
Reviewers: davidxl, mehdi_amini, tejohnson
Subscribers: pcc, davide, llvm-commits, mehdi_amini
Differential Revision: https://reviews.llvm.org/D27790
llvm-svn: 289957
This pass prepares a module containing type metadata for ThinLTO by splitting
it into regular and thin LTO parts if possible, and writing both parts to
a multi-module bitcode file. Modules that do not contain type metadata are
written unmodified as a single module.
All globals with type metadata are added to the regular LTO module, and
the rest are added to the thin LTO module.
Differential Revision: https://reviews.llvm.org/D27324
llvm-svn: 289899
This implements execute-only support for ARM code generation, which
prevents the compiler from generating data accesses to code sections.
The following changes are involved:
* Add the CodeGen option "-arm-execute-only" to the ARM code generator.
* Add the clang flag "-mexecute-only" as well as the GCC-compatible
alias "-mpure-code" to enable this option.
* When enabled, literal pools are replaced with MOVW/MOVT instructions,
with VMOV used in addition for floating-point literals. As the MOVT
instruction is required, execute-only support is only available in
Thumb mode for targets supporting ARMv8-M baseline or Thumb2.
* Jump tables are placed in data sections when in execute-only mode.
* The execute-only text section is assigned section ID 0, and is
marked as unreadable with the SHF_ARM_PURECODE flag with symbol 'y'.
This also overrides selection of ELF sections for globals.
llvm-svn: 289784
When getting attributes it is sometimes nicer to use Optional<T> some of the time instead of magic values. I tried to cut over to only using the Optional values but it made many of the call sites very messy, so it makes sense the leave in the calls that can return a default value. Otherwise code that looks like this:
uint64_t CallColumn = Die.getAttributeValueAsAddress(DW_AT_call_line, 0);
Has to be turned into:
uint64_t CallColumn = 0;
if (auto CallColumnValue = Die.getAttributeValueAsAddress(DW_AT_call_line))
CallColumn = *CallColumnValue;
The first snippet of code looks much better. But in cases where you want an offset that may or may not be there, the following code looks better:
if (auto StmtOffset = Die.getAttributeValueAsSectionOffset(DW_AT_stmt_list)) {
// Use StmtOffset
}
Differential Revision: https://reviews.llvm.org/D27772
llvm-svn: 289731
Summary:
The motivation is to support better the -object_path_lto option on
Darwin. The linker needs to write down the generate object files on
disk for later use by lldb or dsymutil (debug info are not present
in the final binary). We're moving this into libLTO so that we can
be smarter when a cache is enabled and hard-link when possible
instead of duplicating the files.
Reviewers: tejohnson, deadalnix, pcc
Subscribers: dexonsmith, llvm-commits
Differential Revision: https://reviews.llvm.org/D27507
llvm-svn: 289631
Summary:
LinkDyLib is only used (before arg processing) to set up the default for
LinkMode. So reset LinkMode as well, and process before --link-shared or
--link-static to allow those flags to continue to override it.
Reviewers: beanz
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D27736
llvm-svn: 289608
since bpf instruction stream is multiple of 8 change llvm-objdump
to print decimal instruction number instead of hex address, so that
users don't have to do this math manually to match kernel verifier output
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
llvm-svn: 289569
Many places pass around a DWARFDebugInfoEntryMinimal and a DWARFUnit. It is easy to get things wrong by using the wrong DWARFUnit with a DWARFDebugInfoEntryMinimal. This patch creates a DWARFDie class that contains the DWARFUnit and DWARFDebugInfoEntryMinimal objects so that they can't get out of sync. All attribute extraction has been moved out of DWARFDebugInfoEntryMinimal and into DWARFDie. DWARFDebugInfoEntryMinimal was also renamed to DWARFDebugInfoEntry.
DWARFDie objects are temporary objects that are used by clients and contain 2 pointers that you always need to have anyway. Keeping them grouped will avoid errors and simplify many of the attribute extracting APIs by not having to pass in a DWARFUnit.
Differential Revision: https://reviews.llvm.org/D27634
llvm-svn: 289565
incorrect output when LLVM is built with `LLVM_BUILD_LLVM_DYLIB`.
`llvm-config` previously produced output like this
```
$ llvm-config --libfiles
/usr/lib/liblibLLVM-4.0svn.so.so
$ llvm-config --libnames
liblibLLVM-4.0svn.so.so
```
The library prefix and shared library extension were added to
the library name twice which was wrong.
I wanted to write a test cases for this but it looks like **all**
`llvm-config` tests were disabled by r260386 so I'll leave this for
now.
Subscribers: llvm-commits, tstellarAMD
Reviewers: beanz, DiamondLovesYou, axw
Differential Revision: https://reviews.llvm.org/D27393
llvm-svn: 289488
Most importantly, we need to hash the relocation model, otherwise we can
end up trying to link non-PIC object files into PIEs or DSOs.
Differential Revision: https://reviews.llvm.org/D27556
llvm-svn: 289024
This abstracts the code for emitting DWARF binary from the DWARFYAML types into reusable interfaces that could be used by ELF and COFF.
llvm-svn: 288990
Since DWARF formatting is agnostic to the object file it is stored in, it doesn't make sense for this to be in the MachOYAML implementation. Pulling it into its own namespace means we could modify the ELF and COFF YAML tools to emit DWARF as well.
In a follow-up patch I will better abstract this in obj2yaml and yaml2obj so that the DWARF bits in the tools can be re-used too.
llvm-svn: 288984
These are OpenBSD specific program headers.
OpenBSD commit:
d39116912b
It is required for fixing PR31288.
Differential revision: https://reviews.llvm.org/D27456
llvm-svn: 288831
This patch adds the starting support for encoding data from the MachO __DWARF segment. The first section supported is the __debug_str section because it is the simplest.
llvm-svn: 288774
Summary:
r288722 introduced a build break due some code that should
not have been part of the commit. This change removes the offending
code.
Reviewers: davide, ruiu
Differential Revision: https://reviews.llvm.org/D27435
llvm-svn: 288742
Summary: The code we use to read PDBs assumed that streams we ask it to read exist, and would read memory outside a vector and crash if this wasn't the case. This would, for example, cause llvm-pdbdump to crash on PDBs generated by lld. This patch handles such cases more gracefully: the PDB reading code in LLVM now reports errors when asked to get a stream that is not present, and llvm-pdbdump will report missing streams and continue processing streams that are present.
Reviewers: ruiu, zturner
Subscribers: thakis, amccarth
Differential Revision: https://reviews.llvm.org/D27325
llvm-svn: 288722
