This patch teaches view RegisterFileStatistics how to report events for
optimizable register moves.
For each processor register file, view RegisterFileStatistics reports the
following extra information:
- Number of optimizable register moves
- Number of register moves eliminated
- Number of zero moves (i.e. register moves that propagate a zero)
- Max Number of moves eliminated per cycle.
Differential Revision: https://reviews.llvm.org/D53976
llvm-svn: 345865
Summary: ar and objcopy/strip all support configuring whether archives are written deterministically (timestamps/UIDs/GIDs/etc zero'd). This has been ported to llvm-ar (the U/D modifiers) but not yet to llvm-objcopy/strip.
Reviewers: jakehehrlich, jhenderson, alexshap
Reviewed By: jhenderson
Subscribers: ruiu, mgrang, llvm-commits
Differential Revision: https://reviews.llvm.org/D53913
llvm-svn: 345859
Summary:
--localize-symbol and --localize-hidden will currently localize common symbols. GNU objcopy will not localize these symbols even when explicitly requested, which seems reasonable; common symbols should always be global so they can be merged during linking.
See PR39461
Reviewers: jakehehrlich, jhenderson, alexshap, MaskRay, espindola
Reviewed By: jakehehrlich, jhenderson, alexshap, MaskRay
Subscribers: emaste, arichardson, alexshap, MaskRay, llvm-commits
Differential Revision: https://reviews.llvm.org/D53782
llvm-svn: 345856
Summary: --keep-global-symbol and --globalize-symbol don't make sense for undefined symbols, so it should be ignored for those symbols. This matches GNU objcopy behavior.
Reviewers: jhenderson, alexshap, jakehehrlich, espindola
Reviewed By: jhenderson, jakehehrlich
Subscribers: emaste, arichardson, llvm-commits
Differential Revision: https://reviews.llvm.org/D53733
llvm-svn: 345614
Summary: This allows to remove `using namespace llvm;` in those *.cpp files
When we want to revisit the decision (everything resides in llvm::mca::*) in the future, we can move things to a nested namespace of llvm::mca::, to conceptually make them separate from the rest of llvm::mca::*
Reviewers: andreadb, mattd
Reviewed By: andreadb
Subscribers: javed.absar, tschuett, gbedwell, llvm-commits
Differential Revision: https://reviews.llvm.org/D53407
llvm-svn: 345612
The purpose of this patch is twofold:
- Fold pre-DWARF v5 functionality into v5 to eliminate the need for 2 different
versions of range list handling. We get rid of DWARFDebugRangelist{.cpp,.h}.
- Templatize the handling of range list tables so that location list handling
can take advantage of it as well. Location list and range list tables have the
same basic layout.
A non-NFC version of this patch was previously submitted with r342218, but it caused
errors with some TSan tests. This patch has no functional changes. The difference to
the non-NFC patch is that there are no changes to rangelist dumping in this patch.
Differential Revision: https://reviews.llvm.org/D53545
llvm-svn: 345546
In this diff the elf-specific code is moved into the subfolder ELF
(and factored out from llvm-objcopy.cpp).
Test plan: make check-all
Differential revision: https://reviews.llvm.org/D53790
llvm-svn: 345544
This fixes PR39402. The crash was caused when dereferencing nullptr in
DumpObject and printArchiveChild.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D53690
Patch by Xing GUO
llvm-svn: 345503
Before this change, the lowering of instructions from llvm::MCInst to
mca::Instruction was done as part of the first stage of the pipeline (i.e. the
FetchStage). In particular, FetchStage was responsible for picking the next
instruction from the source sequence, and lower it to an mca::Instruction with
the help of an object of class InstrBuilder.
The dependency on InstrBuilder was problematic for a number of reasons. Class
InstrBuilder only knows how to lower from llvm::MCInst to mca::Instruction.
That means, it is hard to support a different scenario where instructions
in input are not instances of class llvm::MCInst. Even if we managed to
specialize InstrBuilder, and generalize most of its internal logic, the
dependency on InstrBuilder in FetchStage would have caused more troubles (other
than complicating the pipeline logic).
With this patch, the lowering step is done before the pipeline is run. The
pipeline is no longer responsible for lowering from MCInst to mca::Instruction.
As a consequence of this, the FetchStage no longer needs to interact with an
InstrBuilder. The mca::SourceMgr class now simply wraps a reference to a
sequence of mca::Instruction objects.
This simplifies the logic of FetchStage, and increases the usability of it. As
a result, on a debug build, we see a 7-9% speedup; on a release build, the
speedup is around 3-4%.
llvm-svn: 345500
Summary: SNB is the only one that has P23 as a single proc res.
Reviewers: gchatelet
Subscribers: tschuett, llvm-commits
Differential Revision: https://reviews.llvm.org/D53766
llvm-svn: 345480
Summary:
Add missing breaks. Several functions used nested switch statements,
where the outer switch branches based on the architecture, and the inner
switch handles architecture-specific types. If the type isn't
architecture-specific, break out to the generic types rather than fall
through.
getElfPtType: For GNU-style output, llvm-readobj prints
"<unknown>: 0xnnnnnnnn" for an unrecognized segment type, unless the
architecture is EM_ARM, EM_MIPS, or EM_MIPS_RS3_LE, in which case it
prints "". This behavior appears accidental, so instead, always print
the "<unknown>: 0xnnnnnnnn" string.
Reviewers: pcc, grimar
Reviewed By: grimar
Subscribers: sdardis, javed.absar, arichardson, kristof.beyls, atanasyan, llvm-commits
Differential Revision: https://reviews.llvm.org/D53730
llvm-svn: 345436
ADDLIB is called to add the contents of an archive to another archive.
Previously this was only accessible through the use of an MRI script.
With the use of a new "L" modifier, archive files can treated in the
manner above when using quick append.
llvm-svn: 345383
Change a \t to spaces
Change some zero-filling memcpy to aggregate initialization
Delete redundant ArchiveName.clear() after declaration
llvm-svn: 345367
This patch introduces a new base class for Instruction named InstructionBase.
Class InstructionBase is responsible for tracking data dependencies with the
help of ReadState and WriteState objects. Class Instruction now derives from
InstructionBase, and adds extra information related to the `InstrStage` as well
as the `RCUTokenID`.
ReadState and WriteState objects are no longer unique pointers. This avoids
extra heap allocation and pointer checks that weren't really needed. Now, those
objects are simply stored into SmallVectors. We use a SmallVector instead of a
std::vector because we expect most instructions to only have a very small number
of reads and writes. By using a simple SmallVector we also avoid extra heap
allocations most of the time.
In a debug build, this improves the performance of llvm-mca by roughly 10% (I
still have to verify the impact in performance on a release build).
llvm-svn: 345280
Summary:
The pfm counters are now in the ExegesisTarget rather than the
MCSchedModel (PR39165).
This also compresses the pfm counter tables (PR37068).
Reviewers: RKSimon, gchatelet
Subscribers: mgrang, llvm-commits
Differential Revision: https://reviews.llvm.org/D52932
llvm-svn: 345243
GNU readelf tool prints hex value of the ELF header flags field and the
flags names. This change adds the same functionality to llvm-readobj.
Now llvm-readobj can print MIPS and RISCV flags.
New GNUStyle::printFlags() method is a copy of ScopedPrinter::printFlags()
routine. Probably we can escape code duplication and / or simplify the
printFlags() method. But it's a task for separate commit.
Differential revision: https://reviews.llvm.org/D52027
llvm-svn: 345238
In this diff we introduce dispatch mechanism based on
the type of the input (archive, object file, raw binary)
and the format (coff, elf, macho).
We also move the ELF-specific code into the namespace llvm::objcopy::elf.
Test plan: make check-all
Differential revision: https://reviews.llvm.org/D53311
llvm-svn: 345217
Summary:
This renames the IsParsingMSInlineAsm member variable of AsmLexer to
LexMasmIntegers and moves it up to MCAsmLexer. This is the only behavior
controlled by that variable. I added a public setter, so that it can be
set from outside or from the llvm-mc command line. We may need to
arrange things so that users can get this behavior from clang, but
that's future work.
I also put additional hex literal lexing functionality under this flag
to fix PR32973. It appears that this hex literal parsing wasn't intended
to be enabled in non-masm-style blocks.
Now, masm integers (0b1101 and 0ABCh) work in __asm blocks from clang,
but 0b label references work when using .intel_syntax in standalone .s
files.
However, 0b label references will *not* work from __asm blocks in clang.
They will work from GCC inline asm blocks, which it sounds like is
important for Crypto++ as mentioned in PR36144.
Essentially, we only lex masm literals for inline asm blobs that use
intel syntax. If the .intel_syntax directive is used inside a gnu-style
inline asm statement, masm literals will not be lexed, which is
compatible with gas and llvm-mc standalone .s assembly.
This fixes PR36144 and PR32973.
Reviewers: Gerolf, avt77
Subscribers: eraman, hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D53535
llvm-svn: 345189
Also, removed the initialization of vectors used for processor resource masks.
Support function 'computeProcResourceMasks()' already calls method resize on
those vectors.
No functional change intended.
llvm-svn: 345161
Added begin()/end() methods to allow the usage of SourceMgr in foreach loops.
With this change, method getMCInstFromIndex() (as well as a couple of other
methods) are now redundant, and can be removed from the public interface.
llvm-svn: 345147
On Windows at least, llvm-strings was crashing if it encountered bytes
that mapped to negative chars, as it was passing these into
std::isgraph and std::isblank functions, resulting in undefined
behaviour. On debug builds using MSVC, these functions verfiy that the
value passed in is representable as an unsigned char. Since the char is
promoted to an int, a value greater than 127 would turn into a negative
integer value, and fail the check. Using the llvm::isPrint function is
sufficient to solve the issue.
Reviewed by: ruiu, mstorsjo
Differential Revision: https://reviews.llvm.org/D53509
llvm-svn: 345137
A new class named InstructionError has been added to Support.h in order to
improve the error reporting from class InstrBuilder.
The llvm-mca driver is responsible for handling InstructionError objects, and
printing them out to stderr.
The goal of this patch is to remove all the remaining error handling logic from
the library code.
In particular, this allows us to:
- Simplify the logic in InstrBuilder by removing a needless dependency from
MCInstrPrinter.
- Centralize all the error halding logic in a new function named 'runPipeline'
(see llvm-mca.cpp).
This is also a first step towards generalizing class InstrBuilder, so that in
future, we will be able to reuse its logic to also "lower" MachineInstr to
mca::Instruction objects.
Differential Revision: https://reviews.llvm.org/D53585
llvm-svn: 345129
This patch adds support for dumping the unwind info from ARM64 COFF object
files.
Differential Revision: https://reviews.llvm.org/D53264
llvm-svn: 345108
Using -diff and -verbose together doesn't work today. We should audit
where these two options interact and fix them. In the meantime we error
out when the user try to specify both.
llvm-svn: 345084
Doesn't build on Windows. The call to 'lookup' is ambiguous. Clang and
MSVC agree, anyway.
http://lab.llvm.org:8011/builders/clang-x64-windows-msvc/builds/787
C:\b\slave\clang-x64-windows-msvc\build\llvm.src\unittests\ExecutionEngine\Orc\CoreAPIsTest.cpp(315): error C2668: 'llvm::orc::ExecutionSession::lookup': ambiguous call to overloaded function
C:\b\slave\clang-x64-windows-msvc\build\llvm.src\include\llvm/ExecutionEngine/Orc/Core.h(823): note: could be 'llvm::Expected<llvm::JITEvaluatedSymbol> llvm::orc::ExecutionSession::lookup(llvm::ArrayRef<llvm::orc::JITDylib *>,llvm::orc::SymbolStringPtr)'
C:\b\slave\clang-x64-windows-msvc\build\llvm.src\include\llvm/ExecutionEngine/Orc/Core.h(817): note: or 'llvm::Expected<llvm::JITEvaluatedSymbol> llvm::orc::ExecutionSession::lookup(const llvm::orc::JITDylibSearchList &,llvm::orc::SymbolStringPtr)'
C:\b\slave\clang-x64-windows-msvc\build\llvm.src\unittests\ExecutionEngine\Orc\CoreAPIsTest.cpp(315): note: while trying to match the argument list '(initializer list, llvm::orc::SymbolStringPtr)'
llvm-svn: 345078
In the new scheme the client passes a list of (JITDylib&, bool) pairs, rather
than a list of JITDylibs. For each JITDylib the boolean indicates whether or not
to match against non-exported symbols (true means that they should be found,
false means that they should not). The MatchNonExportedInJD and MatchNonExported
parameters on lookup are removed.
The new scheme is more flexible, and easier to understand.
This patch also updates JITDylib search orders to be lists of (JITDylib&, bool)
pairs to match the new lookup scheme. Error handling is also plumbed through
the LLJIT class to allow regression tests to fail predictably when a lookup from
a lazy call-through fails.
llvm-svn: 345077
Summary:
GNU strip supports both `-s` and `-S` as aliases for `--strip-all` and `--strip-debug`, respectfully.
As part of this, it turns out that strip/objcopy were accepting case insensitive command line args. I'm not sure if there was an explicit reason for this. The only others uses of this are llvm-cvtres/llvm-mt/llvm-lib, which are all tools specific for windows support. Forcing case sensitivity allows both aliases to exist, but seems like a good idea anyway.
And as a surprise test case adjustment, the llvm-strip unit test was running with `-keep=unavailable_symbol`, despite `keep` not be a valid flag for strip. This is because there is a flag `-K` which, when case insensitivity is permitted, allows it to be interpreted as `-K` = `eep=unavailable_symbol` (e.g. to allow `-Kfoo` == `--keep-symbol=foo`).
Reviewers: jakehehrlich, jhenderson, alexshap
Reviewed By: jakehehrlich
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D53163
llvm-svn: 345068
Non-loaded sections (whose unused load-address defaults to zero) should not
be taken into account when calculating ImageBase, or ImageBase will be
incorrectly set to 0.
Patch by Andrew Scheidecker. Thanks Andrew!
https://reviews.llvm.org/D51343
+ // The Sections list may contain sections that weren't loaded for
+ // whatever reason: they may be debug sections, and ProcessAllSections
+ // is false, or they may be sections that contain 0 bytes. If the
+ // section isn't loaded, the load address will be 0, and it should not
+ // be included in the ImageBase calculation.
llvm-svn: 344995
Before this patch we were returning an empty string in case we couldn't
create the output file. Now we return an expected string so we can
return and print the proper issue. We now return errors instead of bools
and defer printing to the call site.
llvm-svn: 344983
Summary:
This allows simplifying references of llvm::foo with foo when the needs
come in the future.
Reviewers: courbet, gchatelet
Reviewed By: gchatelet
Subscribers: javed.absar, tschuett, llvm-commits
Differential Revision: https://reviews.llvm.org/D53455
llvm-svn: 344922
Changed the format call to match the surrounding code. Previously it was
printing an unsigned int while the return type being printed was
long unsigned int or wider. This caused problems for big-endian systems
which were discovered on mips64.
Also, the printed address had less characters than it should because the
character count was directly obtained from the number of bytes in the
address.
The tests were adapted to fit this fix and now use longer addresses.
Patch by Milos Stojanovic.
Differential Revision: https://reviews.llvm.org/D53403
llvm-svn: 344818
Summary:
We only support the first form because we rely on information that is
only available there.
Reviewers: gchatelet
Subscribers: tschuett, llvm-commits
Differential Revision: https://reviews.llvm.org/D53430
llvm-svn: 344782
Summary:
This was lost during refactoring in rL342644.
Fix and simplify simplify value size handling: always go through a 80 bit value,
because the value can be 1 byte). Add unit tests.
Reviewers: gchatelet
Subscribers: tschuett, llvm-commits
Differential Revision: https://reviews.llvm.org/D53423
llvm-svn: 344779
Summary:
We try to recover gracefully on instructions that would crash the
program.
This includes some refactoring of runMeasurement() implementations.
Reviewers: gchatelet
Subscribers: tschuett, llvm-commits
Differential Revision: https://reviews.llvm.org/D53371
llvm-svn: 344695
Summary: LatencyGenerator now computes all possible mode of serial execution for an Instruction upfront and generates CodeTemplate for the ones that give the best results (e.g. no need to generate a two instructions snippet when repeating a single one would do). The next step is to generate even more configurations for cases (e.g. for XOR we should generate "XOR EAX, EAX, EAX" and "XOR EAX, EAX, EBX")
Reviewers: courbet
Reviewed By: courbet
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D53320
llvm-svn: 344689
All the PassBuilder::parse interfaces now return descriptive StringError
instead of a plain bool. It allows to make -passes/aa-pipeline parsing
errors context-specific and thus less confusing.
TODO: ideally we should also make suggestions for misspelled pass names,
but that requires some extensions to PassBuilder.
Reviewed By: philip.pfaffe, chandlerc
Differential Revision: https://reviews.llvm.org/D53246
llvm-svn: 344685
Summary:
D45602 added this to most tools, including llvm-lto, but not to
llvm-lto2. Add it there and test that it works in both lto tools.
Reviewers: ruiu
Subscribers: mehdi_amini, inglorion, eraman, steven_wu, dexonsmith, llvm-commits
Differential Revision: https://reviews.llvm.org/D53330
llvm-svn: 344631
In this diff we move out the hierarchy of buffers from Object.h/Object.cpp
into separate files since it is not ELF-specific and will be reused later.
After this change Object.h/Object.cpp are almost exclusively ELF-specific.
Test plan: make check-all
Differential revision: https://reviews.llvm.org/D53298
llvm-svn: 344585
This commit adds a 'Legacy' prefix to old ORC layers and utilities, and removes
the '2' suffix from the new ORC layers. If you wish to continue using the old
ORC layers you will need to add a 'Legacy' prefix to your classes. If you were
already using the new ORC layers you will need to drop the '2' suffix.
The legacy layers will remain in-tree until the new layers reach feature
parity with them. This will involve adding support for removing code from the
new layers, and ensuring that performance is comperable.
llvm-svn: 344572
There are several places where we use CMAKE_CONFIGURATION_TYPES to determine if we are using an IDE generator and in turn decide not to generate some of the convenience targets (like all the install-* and check-llvm-* targets). This decision is made because IDEs don't always deal well with the thousands of targets LLVM can generate.
This approach does not work for Visual Studio 15's new CMake integration. Because VS15 uses a Ninja generator, it isn't a multi-configuration build, and generating all these extra targets mucks up the UI and adds little value.
With this change we still don't generate these targets by default for Visual Studio and Xcode generators, and LLVM_ENABLE_IDE becomes a switch that can be enabled on the VS15 CMake builds, to improve the IDE experience.
This is a re-land of r340435, with a few minor fix-ups. The issues causing the revert were addressed in r344218, r344219, and r344553.
llvm-svn: 344555
Summary:
All the PassBuilder::parse interfaces now return descriptive StringError
instead of a plain bool. It allows to make -passes/aa-pipeline parsing
errors context-specific and thus less confusing.
TODO: ideally we should also make suggestions for misspelled pass names,
but that requires some extensions to PassBuilder.
Reviewed By: philip.pfaffe, chandlerc
Differential Revision: https://reviews.llvm.org/D53246
llvm-svn: 344519
This removes the primary remaining API producing `TerminatorInst` which
will reduce the rate at which code is introduced trying to use it and
generally make it much easier to remove the remaining APIs across the
codebase.
Also clean up some of the stragglers that the previous mechanical update
of variables missed.
Users of LLVM and out-of-tree code generally will need to update any
explicit variable types to handle this. Replacing `TerminatorInst` with
`Instruction` (or `auto`) almost always works. Most of these edits were
made in prior commits using the perl one-liner:
```
perl -i -ple 's/TerminatorInst(\b.* = .*getTerminator\(\))/Instruction\1/g'
```
This also my break some rare use cases where people overload for both
`Instruction` and `TerminatorInst`, but these should be easily fixed by
removing the `TerminatorInst` overload.
llvm-svn: 344504
Summary: This is part one of the change where I simply changed the signature of the functions. More work need to be done to actually produce more than one CodeTemplate per instruction.
Reviewers: courbet
Subscribers: tschuett, llvm-commits
Differential Revision: https://reviews.llvm.org/D53209
llvm-svn: 344493
Renames:
JITDylib's setFallbackDefinitionGenerator method to setGenerator.
DynamicLibraryFallbackGenerator class to DynamicLibrarySearchGenerator.
ReexportsFallbackDefinitionGenerator to ReexportsGenerator.
llvm-svn: 344489
This fixes a problem introduced by r344334. A write from a non-zero move
eliminated at register renaming stage was not correctly handled by the PRF. This
would have led to an assertion failure if the processor model declares a PRF
that enables non-zero move elimination.
llvm-svn: 344392
This patch adds the ability to identify instructions that are "move elimination
candidates". It also allows scheduling models to describe processor register
files that allow move elimination.
A move elimination candidate is an instruction that can be eliminated at
register renaming stage.
Each subtarget can specify which instructions are move elimination candidates
with the help of tablegen class "IsOptimizableRegisterMove" (see
llvm/Target/TargetInstrPredicate.td).
For example, on X86, BtVer2 allows both GPR and MMX/SSE moves to be eliminated.
The definition of 'IsOptimizableRegisterMove' for BtVer2 looks like this:
```
def : IsOptimizableRegisterMove<[
InstructionEquivalenceClass<[
// GPR variants.
MOV32rr, MOV64rr,
// MMX variants.
MMX_MOVQ64rr,
// SSE variants.
MOVAPSrr, MOVUPSrr,
MOVAPDrr, MOVUPDrr,
MOVDQArr, MOVDQUrr,
// AVX variants.
VMOVAPSrr, VMOVUPSrr,
VMOVAPDrr, VMOVUPDrr,
VMOVDQArr, VMOVDQUrr
], CheckNot<CheckSameRegOperand<0, 1>> >
]>;
```
Definitions of IsOptimizableRegisterMove from processor models of a same
Target are processed by the SubtargetEmitter to auto-generate a target-specific
override for each of the following predicate methods:
```
bool TargetSubtargetInfo::isOptimizableRegisterMove(const MachineInstr *MI)
const;
bool MCInstrAnalysis::isOptimizableRegisterMove(const MCInst &MI, unsigned
CPUID) const;
```
By default, those methods return false (i.e. conservatively assume that there
are no move elimination candidates).
Tablegen class RegisterFile has been extended with the following information:
- The set of register classes that allow move elimination.
- Maxium number of moves that can be eliminated every cycle.
- Whether move elimination is restricted to moves from registers that are
known to be zero.
This patch is structured in three part:
A first part (which is mostly boilerplate) adds the new
'isOptimizableRegisterMove' target hooks, and extends existing register file
descriptors in MC by introducing new fields to describe properties related to
move elimination.
A second part, uses the new tablegen constructs to describe move elimination in
the BtVer2 scheduling model.
A third part, teaches llm-mca how to query the new 'isOptimizableRegisterMove'
hook to mark instructions that are candidates for move elimination. It also
teaches class RegisterFile how to describe constraints on move elimination at
PRF granularity.
llvm-mca tests for btver2 show differences before/after this patch.
Differential Revision: https://reviews.llvm.org/D53134
llvm-svn: 344334
Summary:
This change adds support for the GNU --target flag, which sets both --input-target and --output-target.
GNU objcopy doesn't do any checking for whether both --target and --{input,output}-target are used, and so it allows both, e.g. "--target A --output-target B" is equivalent to "--input-target A --output-target B" since the later command line flag would override earlier ones. This may be error prone, so I chose to implement it as an error if both are used. I'm not sure if anyone is actually using both.
Reviewers: jakehehrlich, jhenderson, alexshap
Reviewed By: jakehehrlich, alexshap
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D53029
llvm-svn: 344321
In this diff we move out CopyConfig from llvm-oobjcopy.cpp into a separate header CopyConfig.h
to enable us (in the future) reuse this class in the other implementations of objcopy (for coff, mach-o).
Additionally this enables us to unload the complexity from llvm-objcopy.cpp a little bit.
Test plan: make check-all
Differential revision: https://reviews.llvm.org/D53006
llvm-svn: 344307
error() in llvm-nm intentionally does not return so that the callee can move on to future files/slices. When printing the archive map, this is not currently handled (the caller assumes that error() returns), so processing continues despite there being an error.
Also, change one return to a break, so that symbols can be printed even if the archive map is corrupt.
llvm-svn: 344268
libtool requires this text to be present, in order to conclude that
the tool supports response files. Also add an explicit test of using
response files with llvm-nm.
Differential Revision: https://reviews.llvm.org/D53064
llvm-svn: 344222
This can be used to preserve profiling information across codebase
changes that have widespread impact on mangled names, but across which
most profiling data should still be usable. For example, when switching
from libstdc++ to libc++, or from the old libstdc++ ABI to the new ABI,
or even from a 32-bit to a 64-bit build.
The user can provide a remapping file specifying parts of mangled names
that should be treated as equivalent (eg, std::__1 should be treated as
equivalent to std::__cxx11), and profile data will be treated as
applying to a particular function if its name is equivalent to the name
of a function in the profile data under the provided equivalences. See
the documentation change for a description of how this is configured.
Remapping is supported for both sample-based profiling and instruction
profiling. We do not support remapping indirect branch target
information, but all other profile data should be remapped
appropriately.
Support is only added for the new pass manager. If someone wants to also
add support for this for the old pass manager, doing so should be
straightforward.
This is the LLVM side of Clang r344199.
Reviewers: davidxl, tejohnson, dlj, erik.pilkington
Subscribers: mehdi_amini, steven_wu, dexonsmith, llvm-commits
Differential Revision: https://reviews.llvm.org/D51249
llvm-svn: 344200
Add a library that parses optimization remarks (currently YAML, so based
on the YAMLParser).
The goal is to be able to provide tools a remark parser that is not
completely dependent on YAML, in case we decide to change the format
later.
It exposes a C API which takes a handler that is called with the remark
structure.
It adds a libLLVMOptRemark.a static library, and it's used in-tree by
the llvm-opt-report tool (from which the parser has been mostly moved
out).
Differential Revision: https://reviews.llvm.org/D52776
Fixed the tests by removing the usage of C++11 strings, which seems not
to be supported by gcc 4.8.4 if they're used as a macro argument.
llvm-svn: 344171
Add a library that parses optimization remarks (currently YAML, so based
on the YAMLParser).
The goal is to be able to provide tools a remark parser that is not
completely dependent on YAML, in case we decide to change the format
later.
It exposes a C API which takes a handler that is called with the remark
structure.
It adds a libLLVMOptRemark.a static library, and it's used in-tree by
the llvm-opt-report tool (from which the parser has been mostly moved
out).
Differential Revision: https://reviews.llvm.org/D52776
llvm-svn: 344162
Summary: Simplify code by having LLVMState hold the RegisterAliasingTrackerCache.
Reviewers: courbet
Subscribers: tschuett, llvm-commits
Differential Revision: https://reviews.llvm.org/D53078
llvm-svn: 344143
When fillMachineFunction generates a return on targets without a return opcode
(such as AArch64) it should pass an empty set of registers as the return
registers, not 0 which means register number zero.
Differential Revision: https://reviews.llvm.org/D53074
llvm-svn: 344139
sancov subtracts one from the address to get the previous instruction,
which makes sense on x86_64, but not on other platforms.
This change ensures that the offset is correct for different platforms.
The logic for computing the offset is copied from sanitizer_common.
Differential Revision: https://reviews.llvm.org/D53039
llvm-svn: 344103
Summary:
Before, "[options] <inputs>" is unconditionally appended to the `Name` parameter. It is more flexible to change its semantic to `Usage` and let user customize the usage line.
% llvm-objcopy
...
USAGE: llvm-objcopy <input> [ <output> ] [options] <inputs>
With this patch:
% llvm-objcopy
...
USAGE: llvm-objcopy input [output]
Reviewers: rupprecht, alexshap, jhenderson
Reviewed By: rupprecht
Subscribers: jakehehrlich, mehdi_amini, steven_wu, dexonsmith, llvm-commits
Differential Revision: https://reviews.llvm.org/D51009
llvm-svn: 344097
We changed an ArrayRef<uint8_t> to an ArrayRef<uint32_t>, but
it needs to be an ArrayRef<support::ulittle32_t>.
We also change ArrayRef<> to FixedStreamArray<>. Technically
an ArrayRef<> will work, but it can cause a copy in the underlying
implementation if the memory is not contiguous, and there's no
reason not to use a FixedStreamArray<>.
Thanks to nemanjai@ and thakis@ for helping me track this down
and confirm the fix.
llvm-svn: 344063
Summary:
This moves checking logic into the accessors and makes the structure smaller.
It will also help when/if Operand are generated from the TD files.
Subscribers: tschuett, courbet, llvm-commits
Differential Revision: https://reviews.llvm.org/D52982
llvm-svn: 344028
The Globals table is a hash table keyed on symbol name, so
it's possible to lookup symbols by name in O(1) time. Add
a function to the globals stream to do this, and add an option
to llvm-pdbutil to exercise this, then use it to write some
tests to verify correctness.
llvm-svn: 343951
Summary:
The POSIX spec says:
```
If the −t option is used with the −v option, the standard output format shall be:
"%s %u/%u %u %s %d %d:%d %d %s\n", <member mode>, <user ID>,
<group ID>, <number of bytes in member>,
<abbreviated month>, <day-of-month>, <hour>,
<minute>, <year>, <file>
where:
...
<abbreviated month>
Equivalent to the format of the %b conversion specification format in date.
<day-of-month>
Equivalent to the format of the %e conversion specification format in date.
<hour> Equivalent to the format of the %H conversion specification format in date.
<minute> Equivalent to the format of the %M conversion specification format in date.
<year> Equivalent to the format of the %Y conversion specification format in date.
```
This actually used to be the format printed by llvm-ar. It was apparently accidentally changed (see r207385 followed by comments in r207387). This makes it conform to GNU ar for easier replacement.
Reviewers: MaskRay
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D52940
llvm-svn: 343901
This matches the output of binutils' nm and ensures that any scripts
or tools that use nm and expect empty output in case there no symbols
don't break.
Differential Revision: https://reviews.llvm.org/D52943
llvm-svn: 343887
DWARF v5 introduces DW_AT_call_all_calls, a subprogram attribute which
indicates that all calls (both regular and tail) within the subprogram
have call site entries. The information within these call site entries
can be used by a debugger to populate backtraces with synthetic tail
call frames.
Tail calling frames go missing in backtraces because the frame of the
caller is reused by the callee. Call site entries allow a debugger to
reconstruct a sequence of (tail) calls which led from one function to
another. This improves backtrace quality. There are limitations: tail
recursion isn't handled, variables within synthetic frames may not
survive to be inspected, etc. This approach is not novel, see:
https://gcc.gnu.org/wiki/summit2010?action=AttachFile&do=get&target=jelinek.pdf
This patch adds an IR-level flag (DIFlagAllCallsDescribed) which lowers
to DW_AT_call_all_calls. It adds the minimal amount of DWARF generation
support needed to emit standards-compliant call site entries. For easier
deployment, when the debugger tuning is LLDB, the DWARF requirement is
adjusted to v4.
Testing: Apart from check-{llvm, clang}, I built a stage2 RelWithDebInfo
clang binary. Its dSYM passed verification and grew by 1.4% compared to
the baseline. 151,879 call site entries were added.
rdar://42001377
Differential Revision: https://reviews.llvm.org/D49887
llvm-svn: 343883
Flag 'AllowZeroMoveEliminationOnly' should have been a property of the PRF, and
not set at register granularity.
This change also restricts move elimination to writes that update a full
physical register. We assume that there is a strong correlation between
logical registers that allow move elimination, and how those same registers are
allocated to physical registers by the register renamer.
This is still a no functional change, because this experimental code path is
disabled for now. This is done in preparation for another patch that will add
the ability to describe how move elimination works in scheduling models.
llvm-svn: 343787
This should help with catching inconsistent definitions of instructions with
zero opcodes, which also declare to consume scheduler/pipeline resources.
llvm-svn: 343766
Summary:
GNU nm (and other nm implementations, such as "go tool nm") prints an explicit "no symbols" message when an object file has no symbols. Currently llvm-nm just doesn't print anything. Adding an explicit "no symbols" message will allow llvm-nm to be used in place of nm: some scripts and build processes use `nm <file> | grep "no symbols"` as a test to see if a file has no symbols. It will also be more familiar to anyone used to nm.
That said, the format implemented here is slightly different, in that it doesn't print the tool name in the message (which IMHO is not useful to include).
Demo:
```
$ for nm in nm bin/llvm-nm ; do echo "nm implementation: $nm"; $nm /tmp/foo{1,2}.o; echo; done
nm implementation: nm
/tmp/foo1.o:
nm: /tmp/foo1.o: no symbols
/tmp/foo2.o:
0000000000000000 T foo2
nm implementation: bin/llvm-nm
/tmp/foo1.o:
no symbols
/tmp/foo2.o:
0000000000000000 T foo2
```
Reviewers: MaskRay
Reviewed By: MaskRay
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D52810
llvm-svn: 343742
MCContext does not destroy MCSymbols on shutdown. So, rather than putting
SmallVectors (which may heap-allocate) inside MCSymbolWasm, use unowned pointer
to a WasmSignature instead. The signatures are now owned by the AsmPrinter.
Also uses WasmSignature instead of param and result vectors in TargetStreamer,
and leaves some TODOs for further simplification.
Differential Revision: https://reviews.llvm.org/D52580
llvm-svn: 343733
This patch teaches class RegisterFile how to analyze register writes from
instructions that are move elimination candidates.
In particular, it teaches it how to check if a move can be effectively eliminated
by the underlying PRF, and (if necessary) how to perform move elimination.
The long term goal is to allow processor models to describe instructions that
are valid move elimination candidates.
The idea is to let register file definitions in tablegen declare if/when moves
can be eliminated.
This patch is a non functional change.
The logic that performs move elimination is currently disabled. A future patch
will add support for move elimination in the processor models, and enable this
new code path.
llvm-svn: 343691
deserializeMCOperand - ensure that we at least match the first character of the sscanf pattern before calling
This reduces llvm-exegesis uops analysis of the instructions supported from btver2 from 5m13s to 2m1s on debug builds.
llvm-svn: 343690
Two cases in a ThinLTO test were passing for the wrong reasons, since
rL340374. The tests were supposed to be testing that files were being
pruned due to the cache size, but they were in fact being pruned because
they were older than the default expiration period of 1 week.
This change fixes the tests by explicitly setting the expiration time to
the maximum value. This required the option to be exposed in llvm-lto.
By assigning all files in the cache a similar time, it is possible to see
that the newest files are still being kept, and that we aren't passing
for the wrong reason again. In the event that the entry expiration were
to expire for them, then the test would start failing, because these
files would be removed too.
Reviewed by: rnk, inglorion
Differential Revision: https://reviews.llvm.org/D51992
llvm-svn: 343687
Summary:
This is redundant, as FetchStage::getNextInstruction already checks this
and returns llvm::ErrorSuccess() as appropriate.
NFC.
Reviewers: andreadb
Subscribers: gbedwell, llvm-commits
Differential Revision: https://reviews.llvm.org/D52642
llvm-svn: 343555
These work a little differently because they are actually in
the globals stream and are treated as symbol records, even though
DIA presents them as types. So this also adds the necessary
infrastructure to cache records that live somewhere other than
the TPI stream as well.
llvm-svn: 343507
Summary:
Reporting this as an error required stat()ing every file, as well as seeming
semantically questionable.
Reviewers: vsk, bkramer
Subscribers: mgrang, kristina, llvm-commits, liaoyuke
Differential Revision: https://reviews.llvm.org/D52648
llvm-svn: 343460
Summary: This is prelimineary to moving random functions to SnippetGenerator.
Reviewers: courbet
Subscribers: tschuett, llvm-commits
Differential Revision: https://reviews.llvm.org/D52718
llvm-svn: 343456
Summary: I had added support for compressing dwarf sections in a prior commit,
this one adds support for decompressing. Usage is:
llvm-objcopy --decompress-debug-sections input.o output.o
Reviewers: jakehehrlich, jhenderson, alexshap
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D51841
llvm-svn: 343451
for the target machine.
This simplifies usage during setup of concurrent JIT stacks where the client
needs a DataLayout, but not a TargetMachine (TargetMachines are created on
the fly by the compile threads later).
llvm-svn: 343429
There are a few leftovers in rL343163 which span two lines. This commit
changes these llvm::sort(C.begin(), C.end, ...) to llvm::sort(C, ...)
llvm-svn: 343426
(1) Adds comments for the API.
(2) Removes the setArch method: This is redundant: the setArchStr method on the
triple should be used instead.
(3) Turns EmulatedTLS on by default. This matches EngineBuilder's behavior.
llvm-svn: 343423
CompileOnDemandLayer2 now supports user-supplied partition functions (the
original CompileOnDemandLayer already supported these).
Partition functions are called with the list of requested global values
(i.e. global values that currently have queries waiting on them) and have an
opportunity to select extra global values to materialize at the same time.
Also adds testing infrastructure for the new feature to lli.
llvm-svn: 343396
We didn't properly detect when a pointer was a member
pointer, and when that was the case we were not
properly returning class parent info. This caused
member pointers to render incorrectly in pretty mode.
However, we didn't even have pretty tests for pointers
in native mode, so those are also added now to ensure
this.
llvm-svn: 343393
(1) A const accessor for the LLVMContext held by a ThreadSafeContext.
(2) A const accessor for the ThreadSafeModules held by an IRMaterializationUnit.
(3) A const MaterializationResponsibility reference to IRTransformLayer2's
transform function. This makes IRTransformLayer2 useful for JIT debugging
(since it can inspect JIT state through the responsibility argument) as well
as program transformations.
llvm-svn: 343365
Summary: Adds missing debug information accessors to GlobalObject. This puts the finishing touches on cloning debug info in the echo tests.
Reviewers: whitequark, deadalnix
Reviewed By: whitequark
Subscribers: aprantl, JDevlieghere, llvm-commits, harlanhaskins
Differential Revision: https://reviews.llvm.org/D51522
llvm-svn: 343330
- Add fix so that all code paths that create DWARFContext
with an ObjectFile initialise the target architecture in the context
- Add an assert that the Arch is known in the Dwarf CallFrameString method
llvm-svn: 343317
This change is in preparation for a future work on improving support for
optimizable register moves. We already know if a write is from a zero-idiom, so
we can propagate that bit of information to the PRF. We use an APInt mask to
identify registers that are set to zero.
llvm-svn: 343307
one SymbolLinkagePromoter utility.
SymbolLinkagePromoter renames anonymous and private symbols, and bumps all
linkages to at least global/hidden-visibility. Modules whose symbols have been
promoted by this utility can be decomposed into sub-modules without introducing
link errors. This is used by the CompileOnDemandLayer to extract single-function
modules for lazy compilation.
llvm-svn: 343257
Summary: The key is now the resource name, not the resource id.
Reviewers: gchatelet
Subscribers: tschuett, RKSimon, llvm-commits
Differential Revision: https://reviews.llvm.org/D52607
llvm-svn: 343208
The export file of libLTO should has all the interfaces declared in
llvm-c/lto.h and llvm-c/Disassembler.h but LLVMCreateDisasmCPUFeatures
is missing from the list. Export the C API to be consistant.
llvm-svn: 343124
Modifies lit to add a 'thread_support' feature that can be used in lit test
REQUIRES clauses. The thread_support flag is set if -DLLVM_ENABLE_THREADS=ON
and unset if -DLLVM_ENABLE_THREADS=OFF. The lit flag is used to disable the
multiple-compile-threads-basic.ll testcase when threading is disabled.
llvm-svn: 343122
Summary:
THis is a backwards-compatible change (existing files will work as
expected).
See PR39082.
Reviewers: gchatelet
Subscribers: tschuett, llvm-commits
Differential Revision: https://reviews.llvm.org/D52546
llvm-svn: 343108
This caused the DebugInfo/Sparc/gnu-window-save.ll test to fail.
> Functions that have signed return addresses need additional dwarf support:
> - After signing the LR, and before authenticating it, the LR register is in a
> state the is unusable by a debugger or unwinder
> - To account for this a new directive, .cfi_negate_ra_state, is added
> - This directive says the signed state of the LR register has now changed,
> i.e. unsigned -> signed or signed -> unsigned
> - This directive has the same CFA code as the SPARC directive GNU_window_save
> (0x2d), adding a macro to account for multiply defined codes
> - This patch matches the gcc implementation of this support:
> https://patchwork.ozlabs.org/patch/800271/
>
> Differential Revision: https://reviews.llvm.org/D50136
llvm-svn: 343103
This doesn't work well in builds configured with LLVM_ENABLE_THREADS=OFF,
causing the following assert when running
ExecutionEngine/OrcLazy/multiple-compile-threads-basic.ll:
lib/ExecutionEngine/Orc/Core.cpp:1748: Expected<llvm::JITEvaluatedSymbol>
llvm::orc::lookup(const llvm::orc::JITDylibList &, llvm::orc::SymbolStringPtr):
Assertion `ResultMap->size() == 1 && "Unexpected number of results"' failed.
> LLJIT and LLLazyJIT can now be constructed with an optional NumCompileThreads
> arguments. If this is non-zero then a thread-pool will be created with the
> given number of threads, and compile tasks will be dispatched to the thread
> pool.
>
> To enable testing of this feature, two new flags are added to lli:
>
> (1) -compile-threads=N (N = 0 by default) controls the number of compile threads
> to use.
>
> (2) -thread-entry can be used to execute code on additional threads. For each
> -thread-entry argument supplied (multiple are allowed) a new thread will be
> created and the given symbol called. These additional thread entry points are
> called after static constructors are run, but before main.
llvm-svn: 343099
Summary: This is is preparation of exploring value ranges.
Reviewers: courbet
Reviewed By: courbet
Subscribers: mgorny, tschuett, llvm-commits
Differential Revision: https://reviews.llvm.org/D52542
llvm-svn: 343098
Functions that have signed return addresses need additional dwarf support:
- After signing the LR, and before authenticating it, the LR register is in a
state the is unusable by a debugger or unwinder
- To account for this a new directive, .cfi_negate_ra_state, is added
- This directive says the signed state of the LR register has now changed,
i.e. unsigned -> signed or signed -> unsigned
- This directive has the same CFA code as the SPARC directive GNU_window_save
(0x2d), adding a macro to account for multiply defined codes
- This patch matches the gcc implementation of this support:
https://patchwork.ozlabs.org/patch/800271/
Differential Revision: https://reviews.llvm.org/D50136
llvm-svn: 343089
LLJIT and LLLazyJIT can now be constructed with an optional NumCompileThreads
arguments. If this is non-zero then a thread-pool will be created with the
given number of threads, and compile tasks will be dispatched to the thread
pool.
To enable testing of this feature, two new flags are added to lli:
(1) -compile-threads=N (N = 0 by default) controls the number of compile threads
to use.
(2) -thread-entry can be used to execute code on additional threads. For each
-thread-entry argument supplied (multiple are allowed) a new thread will be
created and the given symbol called. These additional thread entry points are
called after static constructors are run, but before main.
llvm-svn: 343058
compilation of IR in the JIT.
ThreadSafeContext is a pair of an LLVMContext and a mutex that can be used to
lock that context when it needs to be accessed from multiple threads.
ThreadSafeModule is a pair of a unique_ptr<Module> and a
shared_ptr<ThreadSafeContext>. This allows the lifetime of a ThreadSafeContext
to be managed automatically in terms of the ThreadSafeModules that refer to it:
Once all modules using a ThreadSafeContext are destructed, and providing the
client has not held on to a copy of shared context pointer, the context will be
automatically destructed.
This scheme is necessary due to the following constraits: (1) We need multiple
contexts for multithreaded compilation (at least one per compile thread plus
one to store any IR not currently being compiled, though one context per module
is simpler). (2) We need to free contexts that are no longer being used so that
the JIT does not leak memory over time. (3) Module lifetimes are not
predictable (modules are compiled as needed depending on the flow of JIT'd
code) so there is no single point where contexts could be reclaimed.
JIT clients not using concurrency can safely use one ThreadSafeContext for all
ThreadSafeModules.
JIT clients who want to be able to compile concurrently should use a different
ThreadSafeContext for each module, or call setCloneToNewContextOnEmit on their
top-level IRLayer. The former reduces compile latency (since no clone step is
needed) at the cost of additional memory overhead for uncompiled modules (as
every uncompiled module will duplicate the LLVM types, constants and metadata
that have been shared).
llvm-svn: 343055
Summary: This is a NFC in preparation of exporting the initial registers as part of the YAML dump
Reviewers: courbet
Reviewed By: courbet
Subscribers: mgorny, tschuett, llvm-commits
Differential Revision: https://reviews.llvm.org/D52427
llvm-svn: 342967
Summary:
This is a step towards fixing PR38048.
Note that right now the measurements are given per instruction. We'll
need to give measurements a per code snippet and update the analysis (PR38731).
Reviewers: gchatelet
Subscribers: tschuett, llvm-commits
Differential Revision: https://reviews.llvm.org/D52041
llvm-svn: 342947
Implementing -print-before-all/-print-after-all/-filter-print-func support
through PassInstrumentation callbacks.
- PrintIR routines implement printing callbacks.
- StandardInstrumentations class provides a central place to manage all
the "standard" in-tree pass instrumentations. Currently it registers
PrintIR callbacks.
Reviewers: chandlerc, paquette, philip.pfaffe
Differential Revision: https://reviews.llvm.org/D50923
llvm-svn: 342896
Summary:
The `set` statements was incorrectly reading the value of the local variable and
setting the value of the parent variable.
Reviewers: tycho, gchatelet, john.brawn
Subscribers: mgorny, tschuett, llvm-commits
Differential Revision: https://reviews.llvm.org/D52343
llvm-svn: 342865
This allows the native reader to find records of class/struct/
union type and dump them. This behavior is tested by using the
diadump subcommand against golden output produced by actual DIA
SDK on the same PDB file, and again using pretty -native to
confirm that we actually dump the classes. We don't find class
members or anything like that yet, for now it's just the class
itself.
llvm-svn: 342779
Instead of indexing local variables by DIE offset, use the variable
name + the path through the lexical block tree. This makes the lookup
key consistent across duplicate abstract origins in different CUs.
llvm-svn: 342776
Summary:
There isn't any actual dependency - there's one #include from CodeGen
but nothing from the header is actually used.
With this change we can use the MCA library from CodeGen without
circular dependencies (e.g. for scheduling).
Reviewers: andreadb
Reviewed By: andreadb
Authored By: orodley
Subscribers: mgorny, gbedwell, llvm-commits
Differential Revision: https://reviews.llvm.org/D52288
llvm-svn: 342706
Summary:
Implement --version for objcopy and strip.
I think there are LLVM utilities that automatically handle this, but that doesn't seem to work with custom parsing since this binary handles both objcopy and strip, so it uses custom parsing.
This fixes PR38298
Reviewers: jhenderson, alexshap, jakehehrlich
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D52328
llvm-svn: 342702
Some records point to an LF_CLASS, LF_UNION, LF_STRUCTURE, or LF_ENUM
which is a forward reference and doesn't contain complete debug
information. In these cases, we'd like to be able to quickly locate the
full record. The TPI stream stores an array of pre-computed record hash
values, one for each type record. If we pre-process this on startup, we
can build a mapping from hash value -> {list of possible matching type
indices}. Since hashes of full records are only based on the name and or
unique name and not the full record contents, we can then use forward
ref record to compute the hash of what *would* be the full record by
just hashing the name, use this to get the list of possible matches, and
iterate those looking for a match on name or unique name.
llvm-pdbutil is updated to resolve forward references for the purposes
of testing (plus it's just useful).
Differential Revision: https://reviews.llvm.org/D52283
llvm-svn: 342656
Summary:
Added function to set a register to a particular value + tests.
Add EFLAGS test, use new setRegTo instead of setRegToConstant.
Reviewers: courbet, javed.absar
Subscribers: llvm-commits, tschuett, mgorny
Differential Revision: https://reviews.llvm.org/D52297
llvm-svn: 342644
This patch adds the ability for processor models to describe dependency breaking
instructions.
Different processors may specify a different set of dependency-breaking
instructions.
That means, we cannot assume that all processors of the same target would use
the same rules to classify dependency breaking instructions.
The main goal of this patch is to provide the means to describe dependency
breaking instructions directly via tablegen, and have the following
TargetSubtargetInfo hooks redefined in overrides by tabegen'd
XXXGenSubtargetInfo classes (here, XXX is a Target name).
```
virtual bool isZeroIdiom(const MachineInstr *MI, APInt &Mask) const {
return false;
}
virtual bool isDependencyBreaking(const MachineInstr *MI, APInt &Mask) const {
return isZeroIdiom(MI);
}
```
An instruction MI is a dependency-breaking instruction if a call to method
isDependencyBreaking(MI) on the STI (TargetSubtargetInfo object) evaluates to
true. Similarly, an instruction MI is a special case of zero-idiom dependency
breaking instruction if a call to STI.isZeroIdiom(MI) returns true.
The extra APInt is used for those targets that may want to select which machine
operands have their dependency broken (see comments in code).
Note that by default, subtargets don't know about the existence of
dependency-breaking. In the absence of external information, those method calls
would always return false.
A new tablegen class named STIPredicate has been added by this patch to let
processor models classify instructions that have properties in common. The idea
is that, a MCInstrPredicate definition can be used to "generate" an instruction
equivalence class, with the idea that instructions of a same class all have a
property in common.
STIPredicate definitions are essentially a collection of instruction equivalence
classes.
Also, different processor models can specify a different variant of the same
STIPredicate with different rules (i.e. predicates) to classify instructions.
Tablegen backends (in this particular case, the SubtargetEmitter) will be able
to process STIPredicate definitions, and automatically generate functions in
XXXGenSubtargetInfo.
This patch introduces two special kind of STIPredicate classes named
IsZeroIdiomFunction and IsDepBreakingFunction in tablegen. It also adds a
definition for those in the BtVer2 scheduling model only.
This patch supersedes the one committed at r338372 (phabricator review: D49310).
The main advantages are:
- We can describe subtarget predicates via tablegen using STIPredicates.
- We can describe zero-idioms / dep-breaking instructions directly via
tablegen in the scheduling models.
In future, the STIPredicates framework can be used for solving other problems.
Examples of future developments are:
- Teach how to identify optimizable register-register moves
- Teach how to identify slow LEA instructions (each subtarget defining its own
concept of "slow" LEA).
- Teach how to identify instructions that have undocumented false dependencies
on the output registers on some processors only.
It is also (in my opinion) an elegant way to expose knowledge to both external
tools like llvm-mca, and codegen passes.
For example, machine schedulers in LLVM could reuse that information when
internally constructing the data dependency graph for a code region.
This new design feature is also an "opt-in" feature. Processor models don't have
to use the new STIPredicates. It has all been designed to be as unintrusive as
possible.
Differential Revision: https://reviews.llvm.org/D52174
llvm-svn: 342555
There were several issues with the previous implementation.
1) There were no tests.
2) We didn't support creating PDBSymbolTypePointer records for
builtin types since those aren't described by LF_POINTER
records.
3) We didn't support a wide enough variety of builtin types even
ignoring pointers.
This patch fixes all of these issues. In order to add tests,
it's helpful to be able to ignore the symbol index id hierarchy
because it makes the golden output from the DIA version not match
our output, so I've extended the dumper to disable dumping of id
fields.
llvm-svn: 342493
rL342465 is breaking the MSVC buildbots, but I need to revert this dependent revision as well.
Summary:
Added function to set a register to a particular value + tests.
Add EFLAGS test, use new setRegTo instead of setRegToConstant.
Reviewers: courbet, javed.absar
Subscribers: mgorny, tschuett, llvm-commits
Differential Revision: https://reviews.llvm.org/D51856
llvm-svn: 342489
This patch adds two new boolean fields:
- Field `ReadState::IndependentFromDef`.
- Field `WriteState::WritesZero`.
Field `IndependentFromDef` is set for ReadState objects associated with
dependency-breaking instructions. It is used by the simulator when updating data
dependencies between registers.
Field `WritesZero` is set by WriteState objects associated with dependency
breaking zero-idiom instructions. It helps the PRF identify which writes don't
consume any physical registers.
llvm-svn: 342483
Summary:
Added function to set a register to a particular value + tests.
Add EFLAGS test, use new setRegTo instead of setRegToConstant.
Reviewers: courbet, javed.absar
Subscribers: mgorny, tschuett, llvm-commits
Differential Revision: https://reviews.llvm.org/D51856
llvm-svn: 342466
top argument when superior to the instrumentated code list capacity can lead to a segfault.
Reviewers: dberris
Reviewed By: dberris
Differential Revision: https://reviews.llvm.org/D52224
llvm-svn: 342461
Previously we would dump the names of enum types, but not their
enumerator values. This adds support for enumerator values. In
doing so, we have to introduce a general purpose mechanism for
caching symbol indices of field list members. Unlike global
types, FieldList members do not have a TypeIndex. So instead,
we identify them by the pair {TypeIndexOfFieldList, IndexInFieldList}.
llvm-svn: 342415
Summary: This will be useful to generate many configurations and test instruction regimes (NaN, Inf, subnormal, normal).
Reviewers: courbet
Subscribers: mgorny, tschuett, llvm-commits
Differential Revision: https://reviews.llvm.org/D51858
llvm-svn: 342369
The original was reverted due to an apparent build-bot test failure,
but it looks like this is just a flaky test.
Also added a C-interface function for large values, and updated
llvm-lto's --thinlto-cache-max-size-bytes switch to take a type larger
than int.
The maximum cache size in terms of bytes is a 64-bit number. However,
the methods to set it only took unsigned previously, which meant that
the maximum cache size could not be specified above 4GB. That's quite
small compared to the output of some projects, so it makes sense to
provide the ability to set larger values in that field.
We also needed a C-interface function that provides a greater range
than the existing thinlto_codegen_set_cache_size_bytes, which also only
takes an unsigned, so this change also adds
hinlto_codegen_set_cache_size_megabytes.
Reviewed by: mehdi_amini, tejohnson, steven_wu
Differential Revision: https://reviews.llvm.org/D52023
llvm-svn: 342366
This diff adds -S as an alias for --strip-all-gnu
(for compatibility with binutils' objcopy).
Patch by Dmitry Golovin!
Test plan: make check-all
Differential revision: https://reviews.llvm.org/D52163
llvm-svn: 342364
For people who use llvm-readelf as a replacement of GNU readelf, they would like to see -d -r ... listed in llvm-readelf -help. It also helps understanding the confusing -s (which is unfortunately different in semantics).
Reviewers: phosek, ruiu, echristo
Reviewed By: ruiu, echristo
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D52129
llvm-svn: 342339
Naively computing the hash after the PDB data has been generated is in practice
as fast as other approaches I tried. I also tried online-computing the hash as
parts of the PDB were written out (https://reviews.llvm.org/D51887; that's also
where all the measuring data is) and computing the hash in parallel
(https://reviews.llvm.org/D51957). This approach here is simplest, without
being slower.
Differential Revision: https://reviews.llvm.org/D51956
llvm-svn: 342333
Currently if we got something like `const Foo` we'd ignore it and
just rely on printing the unmodified `Foo` later on. However,
for testing the native reading code we really would like to be able
to see these so that we can verify that the native reader can
actually handle them. Instead of printing out the full type though,
just print out the header.
llvm-svn: 342295
Also added a C-interface function for large values, and updated
llvm-lto's --thinlto-cache-max-size-bytes switch to take a type larger
than int.
The maximum cache size in terms of bytes is a 64-bit number. However,
the methods to set it only took unsigned previously, which meant that
the maximum cache size could not be specified above 4GB. That's quite
small compared to the output of some projects, so it makes sense to
provide the ability to set larger values in that field.
We also needed a C-interface function that provides a greater range
than the existing thinlto_codegen_set_cache_size_bytes, which also only
takes an unsigned, so this change also adds
hinlto_codegen_set_cache_size_megabytes.
Reviewed by: mehdi_amini, tejohnson, steven_wu
Differential Revision: https://reviews.llvm.org/D52023
llvm-svn: 342233
See rL342148
This probably only shows up in BUILD_SHARED_LIBS=ON builds
which might explain how it crept in.
Differential Revision: https://reviews.llvm.org/D52054
llvm-svn: 342180
add a tool to generate symbol remapping files.
Summary:
The new tool llvm-cxxmap builds a symbol mapping table from a file containing
a description of partial equivalences to apply to mangled names and files
containing old and new symbol tables.
Reviewers: davidxl
Subscribers: mgorny, llvm-commits
Differential Revision: https://reviews.llvm.org/D51470
llvm-svn: 342168
Summary:
The snippet-generation part goes to the SnippetGenerator class.
This will allow benchmarking arbitrary code (see PR38437).
Reviewers: gchatelet
Subscribers: mgorny, tschuett, llvm-commits
Differential Revision: https://reviews.llvm.org/D51979
llvm-svn: 342117
r342003 added support for emitting FPO data from the
DEBUG_S_FRAMEDATA subsection of the .debug$S section to the PDB
file. However, that is not the end of the story. FPO can end
up in two different destinations in a PDB, each corresponding to
a different FPO data source.
The case handled by r342003 involves copying data from the
DEBUG_S_FRAMEDATA subsection of the .debug$S section to the
"New FPO" stream in the PDB, which is then referred to by the
DBI stream. The case handled by this patch involves copying
records from the .debug$F section of an object file to the "FPO"
stream (or perhaps more aptly, the "Old FPO" stream) in the PDB
file, which is also referred to by the DBI stream.
The formats are largely similar, and the difference is mostly
only visible in masm generated object files, such as some of the
low-level CRT object files like memcpy. MASM doesn't appear to
support writing the DEBUG_S_FRAMEDATA subsection, and instead
just writes these records to the .debug$F section.
Although clang-cl does not emit a .debug$F section ever, lld still
needs to support it so we have good debugging for CRT functions.
Differential Revision: https://reviews.llvm.org/D51958
llvm-svn: 342080
Submitted on behalf of Armando Montanez (amontanez@google.com).
Objects with unused program headers copied by objcopy would always have
nonzero values for program header offset and program header entry size.
While technically valid, this atypical behavior triggers warnings in some
tools. This change sets the two fields to zero when the program header is
unused, better fitting the general expectations for unused program header
data.
Section headers behaved somewhat similarly (though only with the entry size),
and are fixed in this revision as well.
Differential Revision: https://reviews.llvm.org/D51961
llvm-svn: 342065
Eliminating some duplication of rangelist dumping code at the expense of
some version-dependent code in dump and extract routines.
Reviewer: dblaikie, JDevlieghere, vleschuk
Differential revision: https://reviews.llvm.org/D51081
llvm-svn: 342048
Summary:
There are two registers encoded in the S_FRAMEPROC flags: one for locals
and one for parameters. The encoding is described by the
ExpandEncodedBasePointerReg function in cvinfo.h. Two bits are used to
indicate one of four possible values:
0: no register - Used when there are no variables.
1: SP / standard - Variables are stored relative to the standard SP
for the ISA.
2: FP - Variables are addressed relative to the ISA frame
pointer, i.e. EBP on x86. If realignment is required, parameters
use this. If a dynamic alloca is used, locals will be EBP relative.
3: Alternative - Variables are stored relative to some alternative
third callee-saved register. This is required to address highly
aligned locals when there are dynamic stack adjustments. In this
case, both the incoming SP saved in the standard FP and the current
SP are at some dynamic offset from the locals. LLVM uses ESI in
this case, MSVC uses EBX.
Most of the changes in this patch are to pass around the CPU so that we
can decode these into real, named architectural registers.
Subscribers: hiraditya
Differential Revision: https://reviews.llvm.org/D51894
llvm-svn: 341999
Summary:
This patch removes the storing of accumulated floating point data
within the llvm-mca library.
This patch splits-up the two quantities: cycles and number of resource units.
By splitting-up these two quantities, we delay the calculation of "cycles per resource unit"
until that value is read, reducing the chance of accumulating floating point error.
I considered using the APFloat, but after measuring performance, for a large (many iteration)
sample, I decided to go with this faster solution.
Reviewers: andreadb, courbet, RKSimon
Reviewed By: andreadb
Subscribers: llvm-commits, javed.absar, tschuett, gbedwell
Differential Revision: https://reviews.llvm.org/D51903
llvm-svn: 341980
