There's some abstraction overhead in the underlying
mechanisms that were being used, and it was leading to an
abundance of small but not-free copies being made. This
showed up on a profile. Eliminating this and going back to
a low-level byte-based implementation speeds up lld with
/DEBUG between 10 and 15%.
Differential Revision: https://reviews.llvm.org/D42148
llvm-svn: 322871
Summary:
- Fix a bug in PrettyBuiltinDumper that returns "void" as the name for
an unspecified builtin type. Since the unspecified param of a variadic
function is considered a builtin of unspecified type in PDBs, we set
"..." for its name.
- Provide a method to determine if a PDBSymbolFunc is variadic in
PrettyFunctionDumper since PDBSymbolFunc::getArgument() doesn't return the
last unspecified-type param.
- Add a pretty-func-dumper.test to test pretty dumping of variadic
functions.
Reviewers: zturner, llvm-commits
Reviewed By: zturner
Differential Revision: https://reviews.llvm.org/D41801
llvm-svn: 322608
We have some code to try to determine how many pieces an MSF
Free Page Map is split into, and this code had an off by one
error which would cause the calculation to be incorrect when
there were exactly 4096*k + 1 blocks in an MSF file.
Original investigation and patch outline by Colden Cullen.
Differential Revision: https://reviews.llvm.org/D41742
llvm-svn: 321880
inlined subroutines for a given address.
This is essentially the hot path of llvm-symbolizer when extracting
inlined frames during symbolization. Previously, we would read every
subprogram and every inlined subroutine, building a std::map across the
entire PC space to the best DIE, and then do only a handful of queries
as we symbolized a backtrace. A huge fraction of the time was spent
building the map itself.
This patch changes it two a two-level system. First, we just build a map
from PC-interval to DWARF subprograms. These are required to be disjoint
and so constructing this is pretty easy. Second, we build a map *just*
for the inlined subroutines within the subprogram containing the query
address. This allows us to look at far fewer DIEs and build a *much*
smaller set of cached maps in the llvm-symbolizer case where only a few
address get symbolized during the entire run.
It also builds both interval maps in a very different way. It constructs
a single flat vector of pairs that maps from offset -> index. The
indices point into collections of DIE objects, but can also be
"tombstones" (-1) to mark gaps. In the case of subprograms, this mostly
just simplifies the data structure a bit. For inlined subroutines,
because we carefully split them as we build the map, we end up in many
cases having no holes and not having to store both start and stop
offsets.
Finally, the PC ranges for the inlined subroutines are compressed into
32-bits by making them relative to the base PC of the outer subprogram.
This means that if you have a single function body with over 2gb of
executable code in it, we will stop mapping address past the first 2gb
of that function into inlined subroutines and just give you the
subprogram. This doesn't seem like a problem. ;]
All of this combines to make llvm-symbolizer *well* over 2x faster for
symbolizing backtraces out of LLVM's unittests. Death-test heavy unit
tests are running >2x faster. I'm still going to look at completely
disabling symbolization there, but figured while I had a good benchmark
we should make symbolization a bit better.
Sadly, the logic to build the flat interval map for the inlined
subroutines is fairly complex. I'm not super happy about this and
welcome any simplifying suggestions.
Huge thanks to Dave Blaikie who helped walk me through what the various
things I needed to do in DWARF to make this work.
Differential Revision: https://reviews.llvm.org/D40987
llvm-svn: 321345
Reorganizes the DWARF consumer to derive the string offsets table
contribution's format from the contribution header instead of
(incorrectly) from the unit's format.
Reviewers: JDevliegehere, aprantl
Differential Revision: https://reviews.llvm.org/D41146
llvm-svn: 321295
Adds missing support for DW_FORM_data16.
Update of r320852/r320886, fixing the unittest again, this time use a
raw char string for the test data.
Differential Revision: https://reviews.llvm.org/D41090
llvm-svn: 321011
Adds missing support for DW_FORM_data16.
Update of r320852, fixing the unittest to use a hand-coded struct
instead of std::array to guarantee data layout.
Differential Revision: https://reviews.llvm.org/D41090
llvm-svn: 320886
This is a special code that indicates that it's a function id.
While I'm still not certain how to interpret these, we definitely
should *not* be using these values as indices into an array directly.
For now, when we encounter one of these, just print the numeric value.
llvm-svn: 320775
This reverts commit ac5edc198eb612f82293850c3488042708b1c5fa.
Apparently this doesn't cover all the bases, so some compilers
and standard libraries still think this is not trivially copyable
even though it is. Reverting this back to an MSVC-only check for
now so that at least we have some coverage.
llvm-svn: 320739
This adds the /DEBUG:GHASH option to LLD which will look for
the existence of .debug$H sections in linker inputs and use them
to accelerate type merging. The clang-cl side has already been
added, so this completes the work necessary to begin experimenting
with this feature.
Differential Revision: https://reviews.llvm.org/D40980
llvm-svn: 320719
Currently this is an LLVM extension to the COFF spec which is
experimental and intended to speed up linking. For now it is
behind a hidden cl::opt flag, but in the future we can move it
to a "real" cc1 flag and have the driver pass it through whenever
it is appropriate.
The patch to actually make use of this section in lld will come
in a followup.
Differential Revision: https://reviews.llvm.org/D40917
llvm-svn: 320649
This fixes a bug where the verifier was complaining about empty
accelerator tables. When the table is empty, its size is not a valid
offset as it points after the end of the section.
This patch also makes the extractor return llvm:Error instead of bool
for better error reporting in the verifier.
Differential revision: https://reviews.llvm.org/D41063
rdar://35932007
llvm-svn: 320399
Currently nothing uses this, but this at least gets the core
algorithm in, and adds some test to demonstrate correctness.
Differential Revision: https://reviews.llvm.org/D40736
llvm-svn: 319854
This was storing the hash alongside the key so that the hash
doesn't need to be re-computed every time, but in doing so it
was allocating a structure to keep the key size small in the
DenseMap. This is a noble goal, but it also leads to a pointer
indirection on every probe, and this cost of this pointer
indirection ends up being higher than the cost of having a
slightly larger entry in the hash table. Removing this not only
simplifies the code, but yields a small but noticeable
performance improvement in the type merging algorithm.
llvm-svn: 319493
This class had some code that would automatically remap type
indices before hashing and serializing. The only caller of
this method was the TypeStreamMerger anyway, and the method
doesn't make general sense, and prevents making certain future
improvements to the class. So, factoring this up one level
into the TypeStreamMerger where it belongs.
llvm-svn: 319377
A couple of places in LLD were passing references to
TypeTableCollections around, which makes it hard to change the
implementation at runtime. However, these cases only needed to
iterate over the types in the collection, and TypeCollection
already provides a handy abstract interface for this purpose.
By implementing this interface, we can get rid of the need to
pass TypeTableBuilder references around, which should allow us
to swap the implementation at runtime in subsequent patches.
llvm-svn: 319345
The motivation behind this patch is that future directions require us to
be able to compute the hash value of records independently of actually
using them for de-duplication.
The current structure of TypeSerializer / TypeTableBuilder being a
single entry point that takes an unserialized type record, and then
hashes and de-duplicates it is not flexible enough to allow this.
At the same time, the existing TypeSerializer is already extremely
complex for this very reason -- it tries to be too many things. In
addition to serializing, hashing, and de-duplicating, ti also supports
splitting up field list records and adding continuations. All of this
functionality crammed into this one class makes it very complicated to
work with and hard to maintain.
To solve all of these problems, I've re-written everything from scratch
and split the functionality into separate pieces that can easily be
reused. The end result is that one class TypeSerializer is turned into 3
new classes SimpleTypeSerializer, ContinuationRecordBuilder, and
TypeTableBuilder, each of which in isolation is simple and
straightforward.
A quick summary of these new classes and their responsibilities are:
- SimpleTypeSerializer : Turns a non-FieldList leaf type into a series of
bytes. Does not do any hashing. Every time you call it, it will
re-serialize and return bytes again. The same instance can be re-used
over and over to avoid re-allocations, and in exchange for this
optimization the bytes returned by the serializer only live until the
caller attempts to serialize a new record.
- ContinuationRecordBuilder : Turns a FieldList-like record into a series
of fragments. Does not do any hashing. Like SimpleTypeSerializer,
returns references to privately owned bytes, so the storage is
invalidated as soon as the caller tries to re-use the instance. Works
equally well for LF_FIELDLIST as it does for LF_METHODLIST, solving a
long-standing theoretical limitation of the previous implementation.
- TypeTableBuilder : Accepts sequences of bytes that the user has already
serialized, and inserts them by de-duplicating with a hash table. For
the sake of convenience and efficiency, this class internally stores a
SimpleTypeSerializer so that it can accept unserialized records. The
same is not true of ContinuationRecordBuilder. The user is required to
create their own instance of ContinuationRecordBuilder.
Differential Revision: https://reviews.llvm.org/D40518
llvm-svn: 319198
(this header is not fully implemented (the out of line function
writeTypeRecordKind is called in an inline function but never
implemented - this fails to link under modular code generation) and not
included anywhere)
llvm-svn: 318987
It turns out this #include isn't used from Host.h anyway,
but by having it it causes circular include dependencies.
This issues only surfaced while I was working on a separate
patch, so I'm submitting this first so that it's independent
of the other, unrelated patch.
llvm-svn: 318489
Initial changes to support debugging PE/COFF files with LLDB on Windows through DIA SDK.
There is another set of changes required on the LLDB side before this does anything.
Differential Revision: https://reviews.llvm.org/D39517
llvm-svn: 318403
Add the option to lookup an address in the debug information and print
out the file, function, block and line table details.
Differential revision: https://reviews.llvm.org/D38409
llvm-svn: 316619
This fixes possible out of bound access in
DWARFDie::getFirstChild()
which might happen when .debug_info section is corrupted,
like shown in testcase.
Differential revision: https://reviews.llvm.org/D39185
llvm-svn: 316566
This adds type index discovery and dumper support for symbol record kind
0x1168, which is a list of inlined function ids. This symbol kind is
undocumented, but S_INLINEES is consistent with the existing
nomenclature.
Fixes PR34222
llvm-svn: 316398
This patch adds two new verifiers:
- It checks that the root DIE of a CU is actually a valid unit DIE.
(based on its tag)
- For DWARF5 which contains a unit type int he CU header, it checks that
this matches the type of the unit DIE.
Differential revision: https://reviews.llvm.org/D38453
llvm-svn: 315121
The test fails on Linux; see follow-up email on the llvm-commits list.
> Add the option to lookup an address in the debug information and print
> out the file, function, block and line table details.
>
> Differential revision: https://reviews.llvm.org/D38409
This also reverts the follow-up r314818:
> [test] Fix llvm-dwarfdump/cmdline.test
>
> Fixes test/tools/llvm-dwarfdump/cmdline.test
llvm-svn: 314825
The list of register ids was previously written out in a couple of dirrent
places. This puts it in a .def file and also adds a few more registers (e.g.
the x87 regs) which should lead to more readable dumps, but I didn't include
the whole list since that seems unnecessary.
X86_MC::initLLVMToSEHAndCVRegMapping is pretty ugly, but at least it's not
relying on magic constants anymore. The TODO of using tablegen still stands.
Differential revision: https://reviews.llvm.org/D38480
llvm-svn: 314821
Add the option to lookup an address in the debug information and print
out the file, function, block and line table details.
Differential revision: https://reviews.llvm.org/D38409
llvm-svn: 314817