as the BinaryOperator, *not* in the block where the IRBuilder is currently
inserting into. Fixes a bug where scalarizePHI would create instructions
that would not dominate all uses.
llvm-svn: 182639
We are not working on a DAG and I ran into a number of problems when I enabled the vectorizations of 'diamond-trees' (trees that share leafs).
* Imroved the numbering API.
* Changed the placement of new instructions to the last root.
* Fixed a bug with external tree users with non-zero lane.
* Fixed a bug in the placement of in-tree users.
llvm-svn: 182508
The earlier change list introduced the following inst combines:
B * (uitofp i1 C) —> select C, B, 0
A * (1 - uitofp i1 C) —> select C, 0, A
select C, 0, B + select C, A, 0 —> select C, A, B
Together these 3 changes would simplify :
A * (1 - uitofp i1 C) + B * uitofp i1 C
down to :
select C, B, A
In practice we found that the first two substitutions can have a
negative effect on performance, because they reduce opportunities to
use FMA contractions; between the two options FMAs are often the
better choice. This change list amends the previous one to enable
just these inst combines:
select C, B, 0 + select C, 0, A —> select C, B, A
A * (1 - uitofp i1 C) + B * uitofp i1 C —> select C, B, A
llvm-svn: 182499
The Value pointers we store in the induction variable list can be RAUW'ed by a
call to SCEVExpander::expandCodeFor, use a TrackingVH instead. Do the same thing
in some other places where we store pointers that could potentially be RAUW'ed.
Fixes PR16073.
llvm-svn: 182485
InstCombine can be uncooperative to vectorization and sink loads into
conditional blocks. This prevents vectorization.
Undo this optimization if there are unconditional memory accesses to the same
addresses in the loop.
radar://13815763
llvm-svn: 181860
CXAAtExitFn was set outside a loop and before optimizations where functions
can be deleted. This patch will set CXAAtExitFn inside the loop and after
optimizations.
Seg fault when running LTO because of accesses to a deleted function.
rdar://problem/13838828
llvm-svn: 181838
We used to give up if we saw two integer inductions. After this patch, we base
further induction variables on the chosen one like we do in the reverse
induction and pointer induction case.
Fixes PR15720.
radar://13851975
llvm-svn: 181746
In the presense of a block being initialized, the frontend will emit the
objc_retain on the original pointer and the release on the pointer loaded from
the alloca. The optimizer will through the provenance analysis realize that the
two are related (albiet different), but since we only require KnownSafe in one
direction, will match the inner retain on the original pointer with the guard
release on the original pointer. This is fixed by ensuring that in the presense
of allocas we only unconditionally remove pointers if both our retain and our
release are KnownSafe (i.e. we are KnownSafe in both directions) since we must
deal with the possibility that the frontend will emit what (to the optimizer)
appears to be unbalanced retain/releases.
An example of the miscompile is:
%A = alloca
retain(%x)
retain(%x) <--- Inner Retain
store %x, %A
%y = load %A
... DO STUFF ...
release(%y)
call void @use(%x)
release(%x) <--- Guarding Release
getting optimized to:
%A = alloca
retain(%x)
store %x, %A
%y = load %A
... DO STUFF ...
release(%y)
call void @use(%x)
rdar://13750319
llvm-svn: 181743
The external user does not have to be in lane #0. We have to save the lane for each scalar so that we know which vector lane to extract.
llvm-svn: 181674
There are two transforms in visitUrem that conflict with each other.
*) One, if a divisor is a power of two, subtracts one from the divisor
and turns it into a bitwise-and.
*) The other unwraps both operands if they are surrounded by zext
instructions.
Flipping the order allows the subtraction to go beneath the sign
extension.
llvm-svn: 181668
Use the widest induction type encountered for the cannonical induction variable.
We used to turn the following loop into an empty loop because we used i8 as
induction variable type and truncated 1024 to 0 as trip count.
int a[1024];
void fail() {
int reverse_induction = 1023;
unsigned char forward_induction = 0;
while ((reverse_induction) >= 0) {
forward_induction++;
a[reverse_induction] = forward_induction;
--reverse_induction;
}
}
radar://13862901
llvm-svn: 181667
The shift amount may be larger than the type leading to undefined behavior.
Limit the transform to constant shift amounts. While there update the bits to
clear in the result which may enable additional optimizations.
PR15959.
llvm-svn: 181604
That's obviously wrong. Conservatively restrict it to the sign bit, which
matches the original intention of this analysis. Fixes PR15940.
llvm-svn: 181518
A computable loop exit count does not imply the presence of an induction
variable. Scalar evolution can return a value for an infinite loop.
Fixes PR15926.
llvm-svn: 181495
- simple one-function case
- function-calling case
- external function calling case
- exception throwing case
- vector case
Note: these tests are somewhat coupled to the current format of debug metadata.
llvm-svn: 181469
The two nested loops were confusing and also conservative in identifying
reduction variables. This patch replaces them by a worklist based approach.
llvm-svn: 181369
We were passing an i32 to ConstantInt::get where an i64 was needed and we must
also pass the sign if we pass negatives numbers. The start index passed to
getConsecutiveVector must also be signed.
Should fix PR15882.
llvm-svn: 181286
Test case by Michele Scandale!
Fixes PR10293: Load not hoisted out of loop with multiple exits.
There are few regressions with this patch, now tracked by
rdar:13817079, and a roughly equal number of improvements. The
regressions are almost certainly back luck because LoopRotate has very
little idea of whether rotation is profitable. Doing better requires a
more comprehensive solution.
This checkin is a quick fix that lacks generality (PR10293 has
a counter-example). But it trivially fixes the case in PR10293 without
interfering with other cases, and it does satify the criteria that
LoopRotate is a loop canonicalization pass that should avoid
heuristics and special cases.
I can think of two approaches that would probably be better in
the long run. Ultimately they may both make sense.
(1) LoopRotate should check that the current header would make a good
loop guard, and that the loop does not already has a sufficient
guard. The artifical SimplifiedLoopLatch check would be unnecessary,
and the design would be more general and canonical. Two difficulties:
- We need a strong guarantee that we won't endlessly rotate, so the
analysis would need to be precise in order to avoid the
SimplifiedLoopLatch precondition.
- Analysis like this are usually based on SCEV, which we don't want to
rely on.
(2) Rotate on-demand in late loop passes. This could even be done by
shoving the loop back on the queue after the optimization that needs
it. This could work well when we find LICM opportunities in
multi-branch loops. This requires some work, and it doesn't really
solve the problem of SCEV wanting a loop guard before the analysis.
llvm-svn: 181230
A * (1 - (uitofp i1 C)) -> select C, 0, A
B * (uitofp i1 C) -> select C, B, 0
select C, 0, A + select C, B, 0 -> select C, B, A
These come up in code that has been hand-optimized from a select to a linear blend,
on platforms where that may have mattered. We want to undo such changes
with the following transform:
A*(1 - uitofp i1 C) + B*(uitofp i1 C) -> select C, A, B
llvm-svn: 181216
We used to disable constant merging not only if a constant is llvm.used, but
also if an alias of a constant is llvm.used. This change fixes that.
llvm-svn: 181175
Add support for min/max reductions when "no-nans-float-math" is enabled. This
allows us to assume we have ordered floating point math and treat ordered and
unordered predicates equally.
radar://13723044
llvm-svn: 181144
By supporting the vectorization of PHINodes with more than two incoming values we can increase the complexity of nested if statements.
We can now vectorize this loop:
int foo(int *A, int *B, int n) {
for (int i=0; i < n; i++) {
int x = 9;
if (A[i] > B[i]) {
if (A[i] > 19) {
x = 3;
} else if (B[i] < 4 ) {
x = 4;
} else {
x = 5;
}
}
A[i] = x;
}
}
llvm-svn: 181037
This reverts commit r180802
There's ongoing discussion about whether this is the right place to make
this transformation. Reverting for now while we figure it out.
llvm-svn: 180834
Always fold a shuffle-of-shuffle into a single shuffle when there's only one
input vector in the first place. Continue to be more conservative when there's
multiple inputs.
rdar://13402653
PR15866
llvm-svn: 180802
This fixes the optimization introduced in r179748 and reverted in r179750.
While the optimization was sound, it did not properly respect differences in
bit-width.
llvm-svn: 180777
This resurrects r179957, but adds code that makes sure we don't touch
atomic/volatile stores:
This transformation will transform a conditional store with a preceeding
uncondtional store to the same location:
a[i] =
may-alias with a[i] load
if (cond)
a[i] = Y
into an unconditional store.
a[i] = X
may-alias with a[i] load
tmp = cond ? Y : X;
a[i] = tmp
We assume that on average the cost of a mispredicted branch is going to be
higher than the cost of a second store to the same location, and that the
secondary benefits of creating a bigger basic block for other optimizations to
work on outway the potential case where the branch would be correctly predicted
and the cost of the executing the second store would be noticably reflected in
performance.
hmmer's execution time improves by 30% on an imac12,2 on ref data sets. With
this change we are on par with gcc's performance (gcc also performs this
transformation). There was a 1.2 % performance improvement on a ARM swift chip.
Other tests in the test-suite+external seem to be mostly uninfluenced in my
experiments:
This optimization was triggered on 41 tests such that the executable was
different before/after the patch. Only 1 out of the 40 tests (dealII) was
reproducable below 100% (by about .4%). Given that hmmer benefits so much I
believe this to be a fair trade off.
llvm-svn: 180731
Turning retains into retainRV calls disrupts the data flow analysis in
ObjCARCOpts. Thus we move it as late as we can by moving it into
ObjCARCContract.
We leave in the conversion from retainRV -> retain in ObjCARCOpt since
it enables the dataflow analysis.
rdar://10813093
llvm-svn: 180698
When Reassociator optimize "(x | C1)" ^ "(X & C2)", it may swap the two
subexpressions, however, it forgot to swap cached constants (of C1 and C2)
accordingly.
rdar://13739160
llvm-svn: 180676
Mainly adding paranoid checks for the closing brace of a function to
help with FileCheck error readability. Also some other minor changes.
No actual CHECK changes.
llvm-svn: 180668
This patch disables memory-instruction vectorization for types that need padding
bytes, e.g., x86_fp80 has 10 bytes store size with 6 bytes padding in darwin on
x86_64. Because the load/store vectorization is performed by the bit casting to
a packed vector, which has incompatible memory layout due to the lack of padding
bytes, the present vectorizer produces inconsistent result for memory
instructions of those types.
This patch checks an equality of the AllocSize of a scalar type and allocated
size for each vector element, to ensure that there is no padding bytes and the
array can be read/written using vector operations.
Patch by Daisuke Takahashi!
Fixes PR15758.
llvm-svn: 180196
even if erroneously annotated with the parallel loop metadata.
Fixes Bug 15794:
"Loop Vectorizer: Crashes with the use of llvm.loop.parallel metadata"
llvm-svn: 180081
This reverts commit r179840 with a fix to test/DebugInfo/two-cus-from-same-file.ll
I'm not sure why that test only failed on ARM & MIPS and not X86 Linux, even
though the debug info was clearly invalid on all of them, but this ought to fix
it.
llvm-svn: 179996
This is an edge case that can happen if we modify a chain of multiple selects.
Update all operands in that case and remove the assert. PR15805.
llvm-svn: 179982
There is the temptation to make this tranform dependent on target information as
it is not going to be beneficial on all (sub)targets. Therefore, we should
probably do this in MI Early-Ifconversion.
This reverts commit r179957. Original commit message:
"SimplifyCFG: If convert single conditional stores
This transformation will transform a conditional store with a preceeding
uncondtional store to the same location:
a[i] =
may-alias with a[i] load
if (cond)
a[i] = Y
into an unconditional store.
a[i] = X
may-alias with a[i] load
tmp = cond ? Y : X;
a[i] = tmp
We assume that on average the cost of a mispredicted branch is going to be
higher than the cost of a second store to the same location, and that the
secondary benefits of creating a bigger basic block for other optimizations to
work on outway the potential case were the branch would be correctly predicted
and the cost of the executing the second store would be noticably reflected in
performance.
hmmer's execution time improves by 30% on an imac12,2 on ref data sets. With
this change we are on par with gcc's performance (gcc also performs this
transformation). There was a 1.2 % performance improvement on a ARM swift chip.
Other tests in the test-suite+external seem to be mostly uninfluenced in my
experiments:
This optimization was triggered on 41 tests such that the executable was
different before/after the patch. Only 1 out of the 40 tests (dealII) was
reproducable below 100% (by about .4%). Given that hmmer benefits so much I
believe this to be a fair trade off.
I am going to watch performance numbers across the builtbots and will revert
this if anything unexpected comes up."
llvm-svn: 179980
Specifically:
1. Added checks that unwind is being properly added to various instructions.
2. Fixed the declaration/calling of objc_release to have a return type of void.
3. Moved all checks to precede the functions and added checks to ensure that the
checks would only match inside the specific function that we are attempting to
check.
llvm-svn: 179973
This transformation will transform a conditional store with a preceeding
uncondtional store to the same location:
a[i] =
may-alias with a[i] load
if (cond)
a[i] = Y
into an unconditional store.
a[i] = X
may-alias with a[i] load
tmp = cond ? Y : X;
a[i] = tmp
We assume that on average the cost of a mispredicted branch is going to be
higher than the cost of a second store to the same location, and that the
secondary benefits of creating a bigger basic block for other optimizations to
work on outway the potential case were the branch would be correctly predicted
and the cost of the executing the second store would be noticably reflected in
performance.
hmmer's execution time improves by 30% on an imac12,2 on ref data sets. With
this change we are on par with gcc's performance (gcc also performs this
transformation). There was a 1.2 % performance improvement on a ARM swift chip.
Other tests in the test-suite+external seem to be mostly uninfluenced in my
experiments:
This optimization was triggered on 41 tests such that the executable was
different before/after the patch. Only 1 out of the 40 tests (dealII) was
reproducable below 100% (by about .4%). Given that hmmer benefits so much I
believe this to be a fair trade off.
I am going to watch performance numbers across the builtbots and will revert
this if anything unexpected comes up.
llvm-svn: 179957
The logic that actually compares the types considers pointers and integers the
same if they are of the same size. This created a strange mismatch between hash
and reality and made the test case for this fail on some platforms (yay,
test cases).
llvm-svn: 179905
Adding another CU-wide list, in this case of imported_modules (since they
should be relatively rare, it seemed better to add a list where each element
had a "context" value, rather than add a (usually empty) list to every scope).
This takes care of DW_TAG_imported_module, but to fully address PR14606 we'll
need to expand this to cover DW_TAG_imported_declaration too.
llvm-svn: 179836
A min/max operation is represented by a select(cmp(lt/le/gt/ge, X, Y), X, Y)
sequence in LLVM. If we see such a sequence we can treat it just as any other
commutative binary instruction and reduce it.
This appears to help bzip2 by about 1.5% on an imac12,2.
radar://12960601
llvm-svn: 179773
This occurs due to an alloca representing a separate ownership from the
original pointer. Thus consider the following pseudo-IR:
objc_retain(%a)
for (...) {
objc_retain(%a)
%block <- %a
F(%block)
objc_release(%block)
}
objc_release(%a)
From the perspective of the optimizer, the %block is a separate
provenance from the original %a. Thus the optimizer pairs up the inner
retain for %a and the outer release from %a, resulting in segfaults.
This is fixed by noting that the signature of a mismatch of
retain/releases inside the for loop is a Use/CanRelease top down with an
None bottom up (since bottom up the Retain-CanRelease-Use-Release
sequence is completed by the inner objc_retain, but top down due to the
differing provenance from the objc_release said sequence is not
completed). In said case in CheckForCFGHazards, we now clear the state
of %a implying that no pairing will occur.
Additionally a test case is included.
rdar://12969722
llvm-svn: 179747
If a switch instruction has a case for every possible value of its type,
with the same successor, SimplifyCFG would replace it with an icmp ult,
but the computation of the bound overflows in that case, which inverts
the test.
Patch by Jed Davis!
llvm-svn: 179587
Two return types are not equivalent if one is a pointer and the other is an
integral. This is because we cannot bitcast a pointer to an integral value.
PR15185
llvm-svn: 179569
One performs: (X == 13 | X == 14) -> X-13 <u 2
The other: (A == C1 || A == C2) -> (A & ~(C1 ^ C2)) == C1
The problem is that there are certain values of C1 and C2 that
trigger both transforms but the first one blocks out the second,
this generates suboptimal code.
Reordering the transforms should be better in every case and
allows us to do interesting stuff like turn:
%shr = lshr i32 %X, 4
%and = and i32 %shr, 15
%add = add i32 %and, -14
%tobool = icmp ne i32 %add, 0
into:
%and = and i32 %X, 240
%tobool = icmp ne i32 %and, 224
llvm-svn: 179493
This is basically the same fix in three different places. We use a set to avoid
walking the whole tree of a big ConstantExprs multiple times.
For example: (select cmp, (add big_expr 1), (add big_expr 2))
We don't want to visit big_expr twice here, it may consist of thousands of
nodes.
The testcase exercises this by creating an insanely large ConstantExprs out of
a loop. It's questionable if the optimizer should ever create those, but this
can be triggered with real C code. Fixes PR15714.
llvm-svn: 179458
When trying to collapse sequences of insertelement/extractelement
instructions into single shuffle instructions, there is one specific
case where the Instruction Combiner wrongly updates the resulting
Mask of shuffle indexes.
The problem is in function CollectShuffleElments.
If we have a sequence of insert/extract element instructions
like the one below:
%tmp1 = extractelement <4 x float> %LHS, i32 0
%tmp2 = insertelement <4 x float> %RHS, float %tmp1, i32 1
%tmp3 = extractelement <4 x float> %RHS, i32 2
%tmp4 = insertelement <4 x float> %tmp2, float %tmp3, i32 3
Where:
. %RHS will have a mask of [4,5,6,7]
. %LHS will have a mask of [0,1,2,3]
The Mask of shuffle indexes is wrongly computed to [4,1,6,7]
instead of [4,0,6,7].
When analyzing %tmp2 in order to compute the Mask for the
resulting shuffle instruction, the algorithm forgets to update
the mask index at position 1 with the index associated to the
element extracted from %LHS by instruction %tmp1.
Patch by Andrea DiBiagio!
llvm-svn: 179291
This commit adds the infrastructure for performing bottom-up SLP vectorization (and other optimizations) on parallel computations.
The infrastructure has three potential users:
1. The loop vectorizer needs to be able to vectorize AOS data structures such as (sum += A[i] + A[i+1]).
2. The BB-vectorizer needs this infrastructure for bottom-up SLP vectorization, because bottom-up vectorization is faster to compute.
3. A loop-roller needs to be able to analyze consecutive chains and roll them into a loop, in order to reduce code size. A loop roller does not need to create vector instructions, and this infrastructure separates the chain analysis from the vectorization.
This patch also includes a simple (100 LOC) bottom up SLP vectorizer that uses the infrastructure, and can vectorize this code:
void SAXPY(int *x, int *y, int a, int i) {
x[i] = a * x[i] + y[i];
x[i+1] = a * x[i+1] + y[i+1];
x[i+2] = a * x[i+2] + y[i+2];
x[i+3] = a * x[i+3] + y[i+3];
}
llvm-svn: 179117
The fix for PR14972 in r177055 introduced a real think-o in the *store*
side, likely because I was much more focused on the load side. While we
can arbitrarily widen (or narrow) a loaded value, we can't arbitrarily
widen a value to be stored, as that changes the width of memory access!
Lock down the code path in the store rewriting which would do this to
only handle the intended circumstance.
All of the existing tests continue to pass, and I've added a test from
the PR.
llvm-svn: 178974
The normal dataflow sequence in the ARC optimizer consists of the following
states:
Retain -> CanRelease -> Use -> Release
The optimizer before this patch stored the uses that determine the lifetime of
the retainable object pointer when it bottom up hits a retain or when top down
it hits a release. This is correct for an imprecise lifetime scenario since what
we are trying to do is remove retains/releases while making sure that no
``CanRelease'' (which is usually a call) deallocates the given pointer before we
get to the ``Use'' (since that would cause a segfault).
If we are considering the precise lifetime scenario though, this is not
correct. In such a situation, we *DO* care about the previous sequence, but
additionally, we wish to track the uses resulting from the following incomplete
sequences:
Retain -> CanRelease -> Release (TopDown)
Retain <- Use <- Release (BottomUp)
*NOTE* This patch looks large but the most of it consists of updating
test cases. Additionally this fix exposed an additional bug. I removed
the test case that expressed said bug and will recommit it with the fix
in a little bit.
llvm-svn: 178921
This optimization is unstable at this moment; it
1) block us on a very important application
2) PR15200
3) test6 and test7 in test/Transforms/ScalarRepl/dynamic-vector-gep.ll
(the CHECK command compare the output against wrong result)
I personally believe this optimization should not have any impact on the
autovectorized code, as auto-vectorizer is supposed to put gather/scatter
in a "right" way. Although in theory downstream optimizaters might reveal
some gather/scatter optimization opportunities, the chance is quite slim.
For the hand-crafted vectorizing code, in term of redundancy elimination,
load-CSE, copy-propagation and DSE can collectively achieve the same result,
but in much simpler way. On the other hand, these optimizers are able to
improve the code in a incremental way; in contrast, SROA is sort of all-or-none
approach. However, SROA might slighly win in stack size, as it tries to figure
out a stretch of memory tightenly cover the area accessed by the dynamic index.
rdar://13174884
PR15200
llvm-svn: 178912
Pass down the fact that an operand is going to be a vector of constants.
This should bring the performance of MultiSource/Benchmarks/PAQ8p/paq8p on x86
back. It had degraded to scalar performance due to my pervious shift cost change
that made all shifts expensive on x86.
radar://13576547
llvm-svn: 178809
The semantics of ARC implies that a pointer passed into an objc_autorelease
must live until some point (potentially down the stack) where an
autorelease pool is popped. On the other hand, an
objc_autoreleaseReturnValue just signifies that the object must live
until the end of the given function at least.
Thus objc_autorelease is stronger than objc_autoreleaseReturnValue in
terms of the semantics of ARC* implying that performing the given
strength reduction without any knowledge of how this relates to
the autorelease pool pop that is further up the stack violates the
semantics of ARC.
*Even though objc_autoreleaseReturnValue if you know that no RV
optimization will occur is more computationally expensive.
llvm-svn: 178612
The iterator could be invalidated when it's recursively deleting a whole bunch
of constant expressions in a constant initializer.
Note: This was only reproducible if `opt' was run on a `.bc' file. If `opt' was
run on a `.ll' file, it wouldn't crash. This is why the test first pushes the
`.ll' file through `llvm-as' before feeding it to `opt'.
PR15440
llvm-svn: 178531
Specifically, objc-arc-expand will make sure that the
objc_retainAutoreleasedReturnValue, objc_autoreleaseReturnValue, and ret
will all have %call as an argument.
llvm-svn: 178382
clang.arc.used is an interesting call for ARC since ObjCARCContract
needs to run to remove said intrinsic to avoid a linker error (since the
call does not exist).
llvm-svn: 178369
Since we handle optimizable objc_retainBlocks through strength reduction
in OptimizableIndividualCalls, we know that all code after that point
will only see non-optimizable objc_retainBlock calls. IsForwarding is
only called by functions after that point, so it is ok to just classify
objc_retainBlock as non-forwarding.
<rdar://problem/13249661>.
llvm-svn: 178285
If an objc_retainBlock has the copy_on_escape metadata attached to it
AND if the block pointer argument only escapes down the stack, we are
allowed to strength reduce the objc_retainBlock to to an objc_retain and
thus optimize it.
Current there is logic in the ARC data flow analysis to handle
this case which is complicated and involved making distinctions in
between objc_retainBlock and objc_retain in certain places and
considering them the same in others.
This patch simplifies said code by:
1. Performing the strength reduction in the initial ARC peephole
analysis (ObjCARCOpts::OptimizeIndividualCalls).
2. Changes the ARC dataflow analysis (which runs after the peephole
analysis) to consider all objc_retainBlock calls to not be optimizable
(since if the call was optimizable, we would have strength reduced it
already).
This patch leaves in the infrastructure in the ARC dataflow analysis to
handle this case, which due to 2 will just be dead code. I am doing this
on purpose to separate the removal of the old code from the testing of
the new code.
<rdar://problem/13249661>.
llvm-svn: 178284
This reverts commit 342d92c7a0adeabc9ab00f3f0d88d739fe7da4c7.
Turns out we're going with a different schema design to represent
DW_TAG_imported_modules so we won't need this extra field.
llvm-svn: 178215
The test was removed since I had not turned off the test during release
builds. This fails since ARC annotations support is conditionally
compiled out during release builds. I added the proper requires header
to assuage this issue.
llvm-svn: 178101
This is just the basic groundwork for supporting DW_TAG_imported_module but I
wanted to commit this before pushing support further into Clang or LLVM so that
this rather churny change is isolated from the rest of the work. The major
churn here is obviously adding another field (within the common DIScope prefix)
to all DIScopes (files, classes, namespaces, lexical scopes, etc). This should
be the last big churny change needed for DW_TAG_imported_module/using directive
support/PR14606.
llvm-svn: 178099
This will allow for verification and analysis of the merge function of
the data flow analyses in the ARC optimizer.
The actual implementation of this feature is by introducing calls to
the functions llvm.arc.annotation.{bottomup,topdown}.{bbstart,bbend}
which are only declared. Each such call takes in a pointer to a global
with the same name as the pointer whose provenance is being tracked and
a pointer whose name is one of our Sequence states and points to a
string that contains the same name.
To ensure that the optimizer does not consider these annotations in any
way, I made it so that the annotations are considered to be of IC_None
type.
A test case is included for this commit and the previous
ObjCARCAnnotation commit.
llvm-svn: 177952
The problem is that the code mistakenly took for granted that following constructor
is able to create an APFloat from a *SIGNED* integer:
APFloat::APFloat(const fltSemantics &ourSemantics, integerPart value)
rdar://13486998
llvm-svn: 177906
This simplification happens at 2 places :
- using the nsw attribute when the shl / mul is used by a sign test
- when the shl / mul is compared for (in)equality to zero
llvm-svn: 177856
The original code used i32, and i64 if legal. This introduced unneeded
casts when they aren't legal, or when the index variable i has another
type. In order of preference: try to use i's type; use the smallest
fitting legal type (using an added DataLayout method); default to i32.
A testcase checks that this works when the index gep operand is i16.
Patch by : Ahmed Bougacha <ahmed.bougacha@gmail.com>
Reviewed by : Duncan
llvm-svn: 177712
The simplify-libcalls pass implemented a doInitialization hook to infer
function prototype attributes for well-known functions. Given that the
simplify-libcalls pass is going away *and* that the functionattrs pass
is already in place to deduce function attributes, I am moving this logic
to the functionattrs pass. This approach was discussed during patch
review:
http://lists.cs.uiuc.edu/pipermail/llvm-commits/Week-of-Mon-20121126/157465.html.
llvm-svn: 177619
- it is trivially known to be used inside the loop in a way that can not be optimized away
- there is no use outside of the loop which can take advantage of the computation hoisting
llvm-svn: 177432
This handles the case where we have an inbounds GEP with alloca as the pointer.
This fixes the regression in PR12750 and rdar://13286434.
Note that we can also fix this by handling some GEP cases in isKnownNonNull.
llvm-svn: 177321
*NOTE* I verified that the original bug behind
dont-infinite-loop-during-block-escape-analysis.ll occurs when using opt on
retain-block-escape-analysis.ll.
llvm-svn: 177240
This is the first step to making all DIScopes have a common metadata prefix (so
that things (using directives, for example) that can appear in any scope can be
added to that common prefix). DIFile is itself a DIScope so the common prefix
of all DIScopes cannot be a DIFile - instead it's the raw filename/directory
name pair.
llvm-svn: 177239
This test makes sure that the ObjCARC escape analysis looks at the uses of
instructions which copy the block pointer value by checking all four cases where
that can occur.
llvm-svn: 177232
Rules include:
1)1 x*y +/- x*z => x*(y +/- z)
(the order of operands dosen't matter)
2) y/x +/- z/x => (y +/- z)/x
The transformation is disabled if the new add/sub expr "y +/- z" is a
denormal/naz/inifinity.
rdar://12911472
llvm-svn: 177088
The fundamental problem is that SROA didn't allow for overly wide loads
where the bits past the end of the alloca were masked away and the load
was sufficiently aligned to ensure there is no risk of page fault, or
other trapping behavior. With such widened loads, SROA would delete the
load entirely rather than clamping it to the size of the alloca in order
to allow mem2reg to fire. This was exposed by a test case that neatly
arranged for GVN to run first, widening certain loads, followed by an
inline step, and then SROA which miscompiles the code. However, I see no
reason why this hasn't been plaguing us in other contexts. It seems
deeply broken.
Diagnosing all of the above took all of 10 minutes of debugging. The
really annoying aspect is that fixing this completely breaks the pass.
;] There was an implicit reliance on the fact that no loads or stores
extended past the alloca once we decided to rewrite them in the final
stage of SROA. This was used to encode information about whether the
loads and stores had been split across multiple partitions of the
original alloca. That required threading explicit tracking of whether
a *use* of a partition is split across multiple partitions.
Once that was done, another problem arose: we allowed splitting of
integer loads and stores iff they were loads and stores to the entire
alloca. This is a really arbitrary limitation, and splitting at least
some integer loads and stores is crucial to maximize promotion
opportunities. My first attempt was to start removing the restriction
entirely, but currently that does Very Bad Things by causing *many*
common alloca patterns to be fully decomposed into i8 operations and
lots of or-ing together to produce larger integers on demand. The code
bloat is terrifying. That is still the right end-goal, but substantial
work must be done to either merge partitions or ensure that small i8
values are eagerly merged in some other pass. Sadly, figuring all this
out took essentially all the time and effort here.
So the end result is that we allow splitting only when the load or store
at least covers the alloca. That ensures widened loads and stores don't
hurt SROA, and that we don't rampantly decompose operations more than we
have previously.
All of this was already fairly well tested, and so I've just updated the
tests to cover the wide load behavior. I can add a test that crafts the
pass ordering magic which caused the original PR, but that seems really
brittle and to provide little benefit. The fundamental problem is that
widened loads should Just Work.
llvm-svn: 177055
constructs default arguments. It can now take default arguments from
cl::opt'ions. Add a new -default-gcov-version=... option, and actually test it!
Sink the reverse-order of the version into GCOVProfiling, hiding it from our
users.
llvm-svn: 177002
This is the next step towards making the metadata for DIScopes have a common
prefix rather than having to delegate based on their tag type.
llvm-svn: 176913
This could be 'null' or the empty string, DIDescriptor::getStringField
coalesces the two cases anyway so it's just a matter of legible/efficient
representation.
The change in behavior of the DICompileUnit::get* functions could be
subsumed by the full verification check - but ideally that should just be an
assertion if we could front-load the actual debug info metadata failure paths.
llvm-svn: 176907
These cases were found by further work to remove support for debug info
versioning. Common cleanups (other than changing the version info in the tag
field) included adding the last parameter to compile_units (recently added for
fission support) and other cases of trailing fields in lexical blocks, compile
units, and subprograms.
llvm-svn: 176834
We want vectorization to happen at -g. Ignore calls to the dbg.value intrinsic
and don't transfer them to the vectorized code.
radar://13378964
llvm-svn: 176768
Summary:
Statistics are still available in Release+Asserts (any +Asserts builds),
and stats can also be turned on with LLVM_ENABLE_STATS.
Move some of the FastISel stats that were moved under DEBUG()
back out of DEBUG(), since stats are disabled across the board now.
Many tests depend on grepping "-stats" output. Move those into
a orig_dir/Stats/. so that they can be marked as unsupported
when building without statistics.
Differential Revision: http://llvm-reviews.chandlerc.com/D486
llvm-svn: 176733
Fixes rdar:13349374.
Volatile loads and stores need to be preserved even if the language
standard says they are undefined. "volatile" in this context means "get
out of the way compiler, let my platform handle it".
Additionally, this is the only way I know of with llvm to write to the
first page (when hardware allows) without dropping to assembly.
llvm-svn: 176599
When considering folding a bitcast of an alloca into the alloca itself,
make sure we don't shrink the amount of memory being allocated, or
things rapidly go sideways.
rdar://13324424
llvm-svn: 176547
This adds minimalistic support for PHI nodes to llvm.objectsize() evaluation
fingers crossed so that it does break clang boostrap again..
llvm-svn: 176408
This matters for example in following matrix multiply:
int **mmult(int rows, int cols, int **m1, int **m2, int **m3) {
int i, j, k, val;
for (i=0; i<rows; i++) {
for (j=0; j<cols; j++) {
val = 0;
for (k=0; k<cols; k++) {
val += m1[i][k] * m2[k][j];
}
m3[i][j] = val;
}
}
return(m3);
}
Taken from the test-suite benchmark Shootout.
We estimate the cost of the multiply to be 2 while we generate 9 instructions
for it and end up being quite a bit slower than the scalar version (48% on my
machine).
Also, properly differentiate between avx1 and avx2. On avx-1 we still split the
vector into 2 128bits and handle the subvector muls like above with 9
instructions.
Only on avx-2 will we have a cost of 9 for v4i64.
I changed the test case in test/Transforms/LoopVectorize/X86/avx1.ll to use an
add instead of a mul because with a mul we now no longer vectorize. I did
verify that the mul would be indeed more expensive when vectorized with 3
kernels:
for (i ...)
r += a[i] * 3;
for (i ...)
m1[i] = m1[i] * 3; // This matches the test case in avx1.ll
and a matrix multiply.
In each case the vectorized version was considerably slower.
radar://13304919
llvm-svn: 176403
The LoopVectorizer often runs multiple times on the same function due to inlining.
When this happens the loop vectorizer often vectorizes the same loops multiple times, increasing code size and adding unneeded branches.
With this patch, the vectorizer during vectorization puts metadata on scalar loops and marks them as 'already vectorized' so that it knows to ignore them when it sees them a second time.
PR14448.
llvm-svn: 176399
The instcombine recognized pattern looks like:
a = b * c
d = a +/- Cst
or
a = b * c
d = Cst +/- a
When creating the new operands for fadd or fsub instruction following the related fmul, the first operand was created with the second original operand (M0 was created with C1) and the second with the first (M1 with Opnd0).
The fix consists in creating the new operands with the appropriate original operand, i.e., M0 with Opnd0 and M1 with C1.
llvm-svn: 176300
This properly asks TargetLibraryInfo if a call is available and if it is, it
can be translated into the corresponding LLVM builtin. We don't vectorize sqrt()
yet because I'm not sure about the semantics for negative numbers. The other
intrinsic should be exact equivalents to the libm functions.
Differential Revision: http://llvm-reviews.chandlerc.com/D465
llvm-svn: 176188
This is a common pattern with dyn_cast and similar constructs, when the
PHI no longer depends on the select it can often be turned into a simpler
construct or even get hoisted out of the loop.
PR15340.
llvm-svn: 175995
Listing all of the attributes for the callee of a call/invoke instruction is way
too much and makes the IR unreadable. Use references to attributes instead.
llvm-svn: 175877
Storing the load/store instructions with the values
and inspect them using Alias Analysis to make sure
they don't alias, since the GEP pointer operand doesn't
take the offset into account.
Trying hard to not add any extra cost to loads and stores
that don't overlap on global values, AA is *only* calculated
if all of the previous attempts failed.
Using biggest vector register size as the stride for the
vectorization access, as we're being conservative and
the cost model (which calculates the real vectorization
factor) is only run after the legalization phase.
We might re-think this relationship in the future, but
for now, I'd rather be safe than sorry.
llvm-svn: 175818
Profiling tests *do* need a JIT. They'll pass if a cross-compiler targetting
AArch64 by default has been built, but fail if a native AArch64 compiler has
been build. Therefore XFAIL is inappropriate and we mark them unsupported.
ExecutionEngine tests are JIT by definition, they should also be unsupported.
Transforms/LICM only uses the interpreter to check the output is still sane
after optimisation. It can be switched to use an interpreter.
llvm-svn: 175433
This fixes PR15289. This bug was introduced (recently) in r175215; collecting
all std::vector references for candidate pairs to delete at once is invalid
because subsequent lookups in the owning DenseMap could invalidate the
references.
bugpoint was able to reduce a useful test case. Unfortunately, because whether
or not this asserts depends on memory layout, this test case will sometimes
appear to produce valid output. Nevertheless, running under valgrind will
reveal the error.
llvm-svn: 175397
(or (bool?A:B),(bool?C:D)) --> (bool?(or A,C):(or B,D))
By the time the OR is visited, both the SELECTs have been visited and not
optimized and the OR itself hasn't been transformed so we do this transform in
the hopes that the new ORs will be optimized.
The transform is explicitly disabled for vector-selects until "codegen matures
to handle them better".
Patch by Muhammad Tauqir!
llvm-svn: 175380
It enables to work with a smaller constant, which is target friendly for those which can compare to immediates.
It also avoids inserting a shift in favor of a trunc, which can be free on some targets.
This used to work until LLVM-3.1, but regressed with the 3.2 release.
llvm-svn: 175270
isn't using the default calling convention. However, if the transformation is
from a call to inline IR, then the calling convention doesn't matter.
rdar://13157990
llvm-svn: 174724
In the loop vectorizer cost model, we used to ignore stores/loads of a pointer
type when computing the widest type within a loop. This meant that if we had
only stores/loads of pointers in a loop we would return a widest type of 8bits
(instead of 32 or 64 bit) and therefore a vector factor that was too big.
Now, if we see a consecutive store/load of pointers we use the size of a pointer
(from data layout).
This problem occured in SingleSource/Benchmarks/Shootout-C++/hash.cpp (reduced
test case is the first test in vector_ptr_load_store.ll).
radar://13139343
llvm-svn: 174377
The main lists of debug info metadata attached to the compile_unit had an extra
layer of metadata nodes they went through for no apparent reason. This patch
removes that (& still passes just as much of the GDB 7.5 test suite). If anyone
can show evidence as to why these extra metadata nodes are there I'm open to
reverting this patch & documenting why they're there.
llvm-svn: 174266
Prepare it for vectors of pointers and handle simple cases. We don't handle
complicated cases because accumulateConstantOffset bails on pointer vectors.
Fixes selfhost on i386.
llvm-svn: 174179
remaining use of AliasAnalysis concepts such as isIdentifiedObject to
prove pointer inequality.
@external_compare in test/Transforms/InstSimplify/compare.ll shows a simple
case where a noalias argument can be equal to a global variable address, and
while AliasAnalysis can get away with saying that these pointers don't alias,
instsimplify cannot say that they are not equal.
llvm-svn: 174122
The AttrBuilder is for building a collection of attributes. The Attribute object
holds only one attribute. So it's not really useful for the Attribute object to
have a creator which takes an AttrBuilder.
This has two fallouts:
1. The AttrBuilder no longer holds its internal attributes in a bit-mask form.
2. The attributes are now ordered alphabetically (hence why the tests have changed).
llvm-svn: 174110