Summary:
This patch adds Pi Blocks to the DDG. A pi-block represents a group of DDG
nodes that are part of a strongly-connected component of the graph.
Replacing all the SCCs with pi-blocks results in an acyclic representation
of the DDG. For example if we have:
{a -> b}, {b -> c, d}, {c -> a}
the cycle a -> b -> c -> a is abstracted into a pi-block "p" as follows:
{p -> d} with "p" containing: {a -> b}, {b -> c}, {c -> a}
In this implementation the edges between nodes that are part of the pi-block
are preserved. The crossing edges (edges where one end of the edge is in the
set of nodes belonging to an SCC and the other end is outside that set) are
replaced with corresponding edges to/from the pi-block node instead.
Authored By: bmahjour
Reviewer: Meinersbur, fhahn, myhsu, xtian, dmgreen, kbarton, jdoerfert
Reviewed By: Meinersbur
Subscribers: ychen, arphaman, simoll, a.elovikov, mgorny, hiraditya, jfb, wuzish, llvm-commits, jsji, Whitney, etiotto, ppc-slack
Tag: #llvm
Differential Revision: https://reviews.llvm.org/D68827
Summary:
To be used in `ConstantRange::mulWithNoOverflow()`,
may in future be useful for when saturating shift/mul ops are added.
These are precise as far as i can tell.
I initially though i will need `APInt::[us]mul_sat()` for these,
but it turned out much simpler to do what `ConstantRange::multiply()`
does - perform multiplication in twice the bitwidth, and then truncate.
Though here we want saturating signed truncation.
Reviewers: nikic, reames, spatel
Reviewed By: nikic
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D69994
Summary:
The signed one is needed for implementation of `ConstantRange::smul_sat()`,
unsigned is for completeness only.
Reviewers: nikic, RKSimon, spatel
Reviewed By: nikic
Subscribers: hiraditya, dexonsmith, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D69993
This recommits 100e797adb433724a17c9b42b6533cd634cb796b (reverted in
009e032634b3bd7fc32071ac2344b12142286477 for failing an assert). While the
root cause was independently reverted in eaff3004019f97c64c88ab76da6b25106b659b30,
this commit includes a LIT to make sure IVDescriptor's SinkAfter logic does not
try to sink branch instructions.
Summary:
To be used in `ConstantRange::shlWithNoOverflow()`,
may in future be useful for when saturating shift/mul ops are added.
Unlike `ConstantRange::shl()`, these are precise.
Reviewers: nikic, spatel, reames
Reviewed By: nikic
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D69960
Summary:
Much like D67339, adds ConstantRange handling for
when we know no-wrap behavior of the `sub`.
Unlike addWithNoWrap(), we only get lucky re returning empty set
for signed wrap. For unsigned, we must perform overflow check manually.
A patch that makes use of this in LVI (CVP) to be posted later.
Reviewers: nikic, shchenz, efriedma
Reviewed By: nikic
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D69918
Summary:
This patch adds PrintArgInline (after PrintArg) that strips the
leading spaces from an argument before printing them, for usage
inline.
Related bug: PR42943 <https://bugs.llvm.org/show_bug.cgi?id=42943>
Patch by Daan Sprenkels!
Reviewers: jhenderson, chandlerc, hintonda
Reviewed By: jhenderson
Subscribers: hiraditya, kristina, llvm-commits, dsprenkels
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D69501
Summary: This patch fixes a number of bugs found in the YAML parser
through fuzzing. In general, this makes the parser more robust against
malformed inputs.
The fixes are mostly improved null checking and returning errors in
more cases. In some cases, asserts were changed to regular errors,
this provides the same robustness but also protects release builds
from the triggering conditions. This also improves the fuzzability of
the YAML parser since asserts can act as a roadblock to further
fuzzing once they're hit.
Each fix has a corresponding test case:
- TestAnchorMapError - Added proper null pointer handling in
`Stream::printError` if N is null and `KeyValueNode::getValue` if
getKey returns null, `Input::createHNodes` `dyn_casts` changed to
`dyn_cast_or_null` so the null pointer checks are actually able to
fail
- TestFlowSequenceTokenErrors - Added case in
`Document::parseBlockNode` for FlowMappingEnd, FlowSequenceEnd, or
FlowEntry tokens outside of mappings or sequences
- TestDirectiveMappingNoValue - Changed assert to regular error
return in `Scanner::scanValue`
- TestUnescapeInfiniteLoop - Fixed infinite loop in
`ScalarNode::unescapeDoubleQuoted` by returning an error for
unrecognized escape codes
- TestScannerUnexpectedCharacter - Changed asserts to regular error
returns in `Scanner::consume`
- TestUnknownDirective - For both of the inputs the stream doesn't
fail and correctly returns TK_Error, but there is no valid root
node for the document. There's no reasonable way to make the
scanner fail for unknown directives without breaking the YAML spec
(see spec-07-01.test). I think the assert is unnecessary given
that an error is still generated for this case.
The `SimpleKeys.clear()` line fixes a bug found by AddressSanitizer
triggered by multiple test cases - when TokenQueue is cleared
SimpleKeys is still holding dangling pointers into it, so SimpleKeys
should be cleared as well.
Patch by Thomas Finch!
Reviewers: chandlerc, Bigcheese, hintonda
Reviewed By: Bigcheese, hintonda
Subscribers: hintonda, kristina, beanz, dexonsmith, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D61608
This recommits 2be17087f8c38934b7fc9208ae6cf4e9b4d44f4b (reverted in
d3ec06d219788801380af1948c7f7ef9d3c6100b for heap-use-after-free) with a fix
in IAI's reset() which was not clearing the set of interleave groups after
deleting them.
The sink-after and interleave-group vectorization decisions were so far applied to
VPlan during initial VPlan construction, which complicates VPlan construction – also because of
their inter-dependence. This patch refactors buildVPlanWithRecipes() to construct a simpler
initial VPlan and later apply both these vectorization decisions, in order, as VPlan-to-VPlan
transformations.
Differential Revision: https://reviews.llvm.org/D68577
In -DBUILD_SHARED_LIBS=on builds, a component must specify its direct dependencies to satisfy -Wl,-z,defs (added by llvm/modules/HandleLLVMOptions.cmake).
Core is a direct dependency via transitive header inclusion:
ld.lld: error: undefined symbol: llvm::LLVMContext::LLVMContext()
>>> referenced by MachineSizeOptsTest.cpp
>>> unittests/Target/X86/CMakeFiles/X86Tests.dir/MachineSizeOptsTest.cpp.o:(testing::internal::TestFactoryImpl<(anonymous namespace)::MachineSizeOptsTest_Test_Test>::CreateTest())
MC is a direct dependency via transitive header inclusion:
ld.lld: error: undefined symbol: llvm::MCTargetOptions::MCTargetOptions()
>>> referenced by MachineSizeOptsTest.cpp
>>> unittests/Target/X86/CMakeFiles/X86Tests.dir/MachineSizeOptsTest.cpp.o:((anonymous namespace)::MachineSizeOptsTest::SetUp())
Summary: This is to address comment on D69409.
Reviewers: davidxl, thakis
Subscribers: mgorny, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D69568
Remarks are usually emitted per-TU, and for generating a standalone
remark file that can be shipped with the linked binary we need some kind
of tool to merge everything together.
The remarks::RemarkLinker class takes care of this and:
* Deduplicates remarks
* Filters remarks with no debug location
* Merges string tables from all the entries
As an output, it provides an iterator range that can be used to
serialize the remarks to a file.
Differential Revision: https://reviews.llvm.org/D69141
Used in D69245, these add pattern matchers for the WithOverflowInst
(capturing the result) and the ExtractValue instructions taking a
template parameter specifying the element being extracted.
Since SCEV can cache information about location of an instruction, it should be invalidated when the instruction is moved.
There should be similar bug in code sinking part of LICM, it will be fixed in a follow-up change.
Patch Author: Daniil Suchkov
Reviewers: asbirlea, mkazantsev, reames
Reviewed By: asbirlea
Subscribers: hiraditya, javed.absar, llvm-commits
Differential Revision: https://reviews.llvm.org/D69370
This is the "official" constant for arm64. We also have another constant
for arm64 (called BP_ARM64), which was used by breakpad while there was
no official constant for arm64 available.
This unit test exposes a bug in LICM: when it hoists instructions it doesn't invalidate SCEV accordingly.
Similar test exposing lack of SCEV invalidation during code sinking will be submitted as a follow-up change.
Patch Author: Daniil Suchkov
Reviewers: mkazantsev, asbirlea, reames
Reviewed By: asbirlea
Subscribers: mgorny, javed.absar, llvm-commits
Differential Revision: https://reviews.llvm.org/D69369
LinkGraph::splitBlock will split a block at a given index, returning a new
block covering the range [ 0, index ) and modifying the original block to
cover the range [ index, original-block-size ). Block addresses, content,
edges and symbols will be updated as necessary. This utility will be used
in upcoming improvements to JITLink's eh-frame support.
Summary:
Delete the BasicBlockPass and BasicBlockManager, all its dependencies and update documentation.
The BasicBlockManager was improperly tested and found to be potentially broken, and was deprecated as of rL373254.
In light of the switch to the new pass manager coming before the next release, this patch is a first cleanup of the LegacyPassManager.
Reviewers: chandlerc, echristo
Subscribers: mehdi_amini, sanjoy.google, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D69121
I am using it in https://reviews.llvm.org/D69399.
This change changes how obj2yaml dumps arrays of `llvm::yaml::Hex8/llvm::yaml::Hex16/llvm::yaml::Hex32`
from:
```
PayloadBytes:
- 0x01
- 0x02
...
```
To
```
PayloadBytes: [ 0x01, 0x02, ... ]
```
The latter way is shorter and looks better for arrays.
Differential revision: https://reviews.llvm.org/D69558
Summary:
This extends the rules for when a call instruction is deemed to be an
FPMathOperator, which is based on the type of the call (i.e. the return
type of the function being called). Previously we only allowed
floating-point and vector-of-floating-point types. Now we also allow
arrays (nested to any depth) of floating-point and
vector-of-floating-point types.
This was motivated by llpc, the pipeline compiler for AMD GPUs
(https://github.com/GPUOpen-Drivers/llpc). llpc has many math library
functions that operate on vectors, typically represented as <4 x float>,
and some that operate on matrices, typically represented as
[4 x <4 x float>], and it's useful to be able to decorate calls to all
of them with fast math flags.
Reviewers: spatel, wristow, arsenm, hfinkel, aemerson, efriedma, cameron.mcinally, mcberg2017, jmolloy
Subscribers: wdng, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D69161
The architecture enum contains two kinds of contstants: the "official" ones
defined by Microsoft, and unofficial constants added by breakpad to cover the
architectures not described by the first ones.
Up until now, there was no big need to differentiate between the two. However,
now that Microsoft has defined
https://docs.microsoft.com/en-us/windows/win32/api/sysinfoapi/ns-sysinfoapi-system_info
a constant for ARM64, we have a name clash.
This patch renames all breakpad-defined constants with to include the prefix
"BP_". This frees up the name "ARM64", which I'll re-introduce with the new
"official" value in a follow-up patch.
Reviewers: amccarth, clayborg
Subscribers: lldb-commits, llvm-commits
Differential Revision: https://reviews.llvm.org/D69285
Summary:
When createing an ORC remote JIT target the current library split forces the target process to link large portions of LLVM (Core, Execution Engine, JITLink, Object, MC, Passes, RuntimeDyld, Support, Target, and TransformUtils). This occurs because the ORC RPC interfaces rely on the static globals the ORC Error types require, which starts a cycle of pulling in more and more.
This patch breaks the ORC RPC Error implementations out into an "OrcError" library which only depends on LLVM Support. It also pulls the ORC RPC headers into their own subdirectory.
With this patch code can include the Orc/RPC/*.h headers and will only incur link dependencies on LLVMOrcError and LLVMSupport.
Reviewers: lhames
Reviewed By: lhames
Subscribers: mgorny, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D68732
Summary:
Add a flag `F_no_mmap` to `FileOutputBuffer` to support
`--[no-]mmap-output-file` in ELF LLD. LLD currently explicitly ignores
this flag for compatibility with GNU ld and gold.
We need this flag to speed up link time for large binaries in certain
scenarios. When we link some of our larger binaries we find that LLD
takes 50+ GB of memory, which causes memory pressure. The memory
pressure causes the VM to flush dirty pages of the output file to disk.
This is normally okay, since we should be flushing cold pages. However,
when using BtrFS with compression we need to write 128KB at a time when
we flush a page. If any page in that 128KB block is written again, then
it must be flushed a second time, and so on. Since LLD doesn't write
sequentially this causes write amplification. The same 128KB block will
end up being flushed multiple times, causing the linker to many times
more IO than necessary. We've observed 3-5x faster builds with
-no-mmap-output-file when we hit this scenario.
The bad scenario only applies to compressed filesystems, which group
together multiple pages into a single compressed block. I've tested
BtrFS, but the problem will be present for any compressed filesystem
on Linux, since it is caused by the VM.
Silently ignoring --no-mmap-output-file caused a silent regression when
we switched from gold to lld. We pass --no-mmap-output-file to fix this
edge case, but since lld silently ignored the flag we didn't realize it
wasn't being respected.
Benchmark building a 9 GB binary that exposes this edge case. I linked 3
times with --mmap-output-file and 3 times with --no-mmap-output-file and
took the average. The machine has 24 cores @ 2.4 GHz, 112 GB of RAM,
BtrFS mounted with -compress-force=zstd, and an 80% full disk.
| Mode | Time |
|---------|-------|
| mmap | 894 s |
| no mmap | 126 s |
When compression is disabled, BtrFS performs just as well with and
without mmap on this benchmark.
I was unable to reproduce the regression with any binaries in
lld-speed-test.
Reviewed By: ruiu, MaskRay
Differential Revision: https://reviews.llvm.org/D69294
Summary:
Fixes some things from original commit at https://reviews.llvm.org/D69136. The main
change is that the heap alloc marker is always stored as ExtraInfo in the machine
instruction instead of in the PointerSumType because it cannot hold more than
4 pointer types.
Add instruction marker to MachineInstr ExtraInfo. This does almost the
same thing as Pre/PostInstrSymbols, except that it doesn't create a label until
printing instructions. This allows for labels to be put around instructions that
are deleted/duplicated somewhere.
Use this marker to track heap alloc site call instructions.
Reviewers: rnk
Subscribers: MatzeB, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D69536
Summary:
(Split of off D67120)
SizeOpts/MachineSizeOpts changes for profile guided size optimization.
(A second try after previously committed as r375254 and reverted as r375375.)
Subscribers: mgorny, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D69409
Summary:
Compare two values, and if they are different, return the position of the
most significant bit that is different in the values.
Needed for D69387.
Reviewers: nikic, spatel, sanjoy, RKSimon
Reviewed By: nikic
Subscribers: xbolva00, hiraditya, dexonsmith, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D69439
The IRBuilder needs to add the strictfp attribute to function
definitions and calls when constrained floating point is enabled.
Since so far all front ends have had to do is flip the constrained
switch, I've made this patch always add the required attributes
when said constrained switch is enabled. This continues to keep
changes to front ends minimal.
Differential Revision: D69312
Summary:
Add instruction marker to MachineInstr ExtraInfo. This does almost the
same thing as Pre/PostInstrSymbols, except that it doesn't create a label until
printing instructions. This allows for labels to be put around instructions that
are deleted/duplicated somewhere.
Also undo the workaround in r375137.
Reviewers: rnk
Subscribers: MatzeB, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D69136
Summary:
There are `*_ov()` functions already, so at least for consistency it may be good to also have saturating variants.
These may or may not be needed for `ConstantRange`'s `shlWithNoWrap()`
Reviewers: spatel, nikic
Reviewed By: nikic
Subscribers: hiraditya, dexonsmith, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D69398
Summary:
There are `*_ov()` functions already, so at least for consistency it may be good to also have saturating variants.
These may or may not be needed for `ConstantRange`'s `mulWithNoWrap()`
Reviewers: spatel, nikic
Reviewed By: nikic
Subscribers: hiraditya, dexonsmith, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D69397
This reverts commit 32ce14e55e5a99dd99c3b4fd4bd0ccaaf2948c30.
In post-commit review, Pavel pointed out that there's a simpler way to
ignore SIGPIPE in lldb that doesn't rely on llvm's handlers.
This reverts commit 40668abca4d307e02b33345cfdb7271549ff48d0.
This causes clang tests to fail, as stacksize=0 is being explicitly passed and
is no longer a no-op.
This roughly mimics `std::thread(...).detach()` except it allows to
customize the stack size. Required for https://reviews.llvm.org/D50993.
I've decided against reusing the existing `llvm_execute_on_thread` because
it's not obvious what to do with the ownership of the passed
function/arguments:
1. If we pass possibly owning functions data to `llvm_execute_on_thread`,
we'll lose the ability to pass small non-owning non-allocating functions
for the joining case (as it's used now). Is it important enough?
2. If we use the non-owning interface in the new use case, we'll force
clients to transfer ownership to the spawned thread manually, but
similar code would still have to exist inside
`llvm_execute_on_thread(_async)` anyway (as we can't just pass the same
non-owning pointer to pthreads and Windows implementations, and would be
forced to wrap it in some structure, and deal with its ownership.
Patch by Dmitry Kozhevnikov!
Differential Revision: https://reviews.llvm.org/D51103
MipsMCAsmInfo was using '$' prefix for Mips32 and '.L' for Mips64
regardless of -target-abi option. By passing MCTargetOptions to MCAsmInfo
we can find out Mips ABI and pick appropriate prefix.
Tags: #llvm, #clang, #lldb
Differential Revision: https://reviews.llvm.org/D66795
Summary:
Reduce include dependencies by no longer including Pass.h from
DataLayout.h. That include seemed irrelevant to DataLayout, as
well as being irrelevant to several users of DataLayout.
Reviewers: rnk
Reviewed By: rnk
Subscribers: mehdi_amini, hiraditya, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D69261
llvm-svn: 375436
Summary:
If all the shifts amount are already poison-producing,
then we can add more poison-producing flags ontop:
https://rise4fun.com/Alive/Ocwi
Otherwise, we should only consider the possible range of shift amts that don't result in poison.
For unsigned range not not overflow, we must not shift out any set bits,
and the actual limit for `x` can be computed by backtransforming
the maximal value we could ever get out of the `shl` - `-1` through
`lshr`. If the `x` is any larger than that then it will overflow.
Likewise for signed range, but just in signed domain..
This is based on the general idea outlined by @nikic in https://reviews.llvm.org/D68672#1714990
Reviewers: nikic, sanjoy
Reviewed By: nikic
Subscribers: hiraditya, llvm-commits, nikic
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D69217
llvm-svn: 375370
Enumerate one less constant range in TestNoWrapRegionExhaustive,
which was unnecessary. This allows us to bump the bit count from
3 to 5 while keeping reasonable timing.
Drop four tests for multiply nowrap regions, as these cover subsets
of the exhaustive test. They do use a wider bitwidth, but I don't
think it's worthwhile to have them additionally now.
llvm-svn: 375369
The unit test uses GlobalISel but the dependency is not listed in the
CMakeLists.txt file which causes failures in shared libs build with GCC.
This just adds the dependency.
Differential revision: https://reviews.llvm.org/D69064
llvm-svn: 375346
If a subregister def was moved across another subregister def and
another use, the main range was not correctly updated. The end point
of the moved interval ended too early and missed the use from theh
other lanes in the subreg def.
llvm-svn: 375300
by ExtBinary format profile
Profile on-demand loading was added for ExtBinary format profile in rL374233,
but currently profile on-demand loading doesn't work well with profile
remapping. The patch adds the support.
Suppose a function in the current module has outline instance in the profile.
The function name in the module is different from the name of the outline
instance, but remapper knows the two names are equal. When loading profile
on-demand, the outline instance has to be loaded with remapper's help.
At the same time SampleProfileReaderItaniumRemapper is changed from a proxy
of SampleProfileReader to a helper member in SampleProfileReader.
Differential Revision: https://reviews.llvm.org/D68901
llvm-svn: 375295
Occasionally, during test teardown, LLDB writes to a closed pipe.
Sometimes the communication is inherently unreliable, so LLDB tries to
avoid being killed due to SIGPIPE (it calls `signal(SIGPIPE, SIG_IGN)`).
However, LLVM's default SIGPIPE behavior overrides LLDB's, causing it to
exit with IO_ERR.
Opt LLDB out of the default SIGPIPE behavior. I expect that this will
resolve some LLDB test suite flakiness (tests randomly failing with
IO_ERR) that we've seen since r344372.
rdar://55750240
Differential Revision: https://reviews.llvm.org/D69148
llvm-svn: 375288
Summary:
This makes it much easier to verify that the implementation matches the
documentation. It uncovered a bug in the unit tests where we were
accidentally setting fast math flags on a load instruction.
Reviewers: spatel, wristow, arsenm, hfinkel, aemerson, efriedma, cameron.mcinally, mcberg2017, jmolloy
Subscribers: wdng, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D69176
llvm-svn: 375252
Summary:
This will allow updating MinidumpYAML and LLDB to use this common
definition.
Reviewers: labath, jhenderson, clayborg
Reviewed By: labath
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D68656
llvm-svn: 375239
Summary:
The current implementation eats the current errors and just outputs
the message parameter passed to llvm::cantFail. This change appends
the original error message(s), so the user can see exactly why
cantFail failed. New logic is conditional on NDEBUG.
Reviewed By: lhames
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D69057
llvm-svn: 375176
Reland r375051 (reverted in r375052) after fixing lld tests on Windows in r375126 and r375131.
Original description: Update GlobPattern in libSupport to handle a few more cases. It does not fully match the `fnmatch` used by GNU objcopy since named character classes (e.g. `[[:digit:]]`) are not supported, but this should support most existing use cases (mostly just `*` is what's used anyway).
This will be used to implement the `--wildcard` flag in llvm-objcopy to be more compatible with GNU objcopy.
This is split off of D66613 to land the libSupport changes separately. The llvm-objcopy part will land soon.
Reviewers: jhenderson, MaskRay, evgeny777, espindola, alexshap
Reviewed By: MaskRay
Subscribers: nickdesaulniers, emaste, arichardson, hiraditya, jakehehrlich, abrachet, seiya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D66613
llvm-svn: 375149
Summary:
This is patch is part of a series to introduce an Alignment type.
See this thread for context: http://lists.llvm.org/pipermail/llvm-dev/2019-July/133851.html
See this patch for the introduction of the type: https://reviews.llvm.org/D64790
Reviewers: courbet
Subscribers: jholewinski, arsenm, dschuff, jyknight, dylanmckay, sdardis, nemanjai, jvesely, nhaehnle, sbc100, jgravelle-google, hiraditya, aheejin, kbarton, fedor.sergeev, asb, rbar, johnrusso, simoncook, apazos, sabuasal, niosHD, jrtc27, MaskRay, zzheng, edward-jones, atanasyan, rogfer01, MartinMosbeck, brucehoult, the_o, PkmX, jocewei, jsji, Jim, lenary, s.egerton, pzheng, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D68993
llvm-svn: 375084
This reverts r375051 (git commit a409afaad64ce83ea44cc30ee5f96b6e613a6e98)
The patch does not work on Windows due to `\` in filenames being interpreted as escaping rather than literal path separators when used by lld linker scripts.
llvm-svn: 375052
Summary: Update GlobPattern in libSupport to handle a few more cases. It does not fully match the `fnmatch` used by GNU objcopy since named character classes (e.g. `[[:digit:]]`) are not supported, but this should support most existing use cases (mostly just `*` is what's used anyway).
This will be used to implement the `--wildcard` flag in llvm-objcopy to be more compatible with GNU objcopy.
This is split off of D66613 to land the libSupport changes separately. The llvm-objcopy part will land soon.
Reviewers: jhenderson, MaskRay, evgeny777, espindola, alexshap
Reviewed By: MaskRay
Subscribers: nickdesaulniers, emaste, arichardson, hiraditya, jakehehrlich, abrachet, seiya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D66613
undo objcopy changes to make this libsupport only
llvm-svn: 375051
This helps with testing and debugging for paths that are assumed
absolute.
It also uses a FileError to provide the file path it's trying to open.
llvm-svn: 375008
Before this patch, changing the working directory of the RedirectingFS
would just forward to its external file system. This prevented us from
having a working directory that only existed in the VFS mapping.
This patch adds support for a virtual working directory in the
RedirectingFileSystem. It now keeps track of its own WD in addition to
updating the WD of the external file system. This ensures that we can
still fall through for relative paths.
This change was originally motivated by the reproducer infrastructure in
LLDB where we want to deal transparently with relative paths.
Differential revision: https://reviews.llvm.org/D65677
llvm-svn: 374955
This reverts the original commit and the follow up:
Revert "[VirtualFileSystem] Support virtual working directory in the RedirectingFS"
Revert "[test] Update YAML mapping in VirtualFileSystemTest"
llvm-svn: 374935
Before this patch, changing the working directory of the RedirectingFS
would just forward to its external file system. This prevented us from
having a working directory that only existed in the VFS mapping.
This patch adds support for a virtual working directory in the
RedirectingFileSystem. It now keeps track of its own WD in addition to
updating the WD of the external file system. This ensures that we can
still fall through for relative paths.
This change was originally motivated by the reproducer infrastructure in
LLDB where we want to deal transparently with relative paths.
Differential revision: https://reviews.llvm.org/D65677
llvm-svn: 374917
Reverse the logic for valid tail predication instructions and create
a whitelist instead. Added other instruction groups that aren't
obviously safe:
- instructions that 'narrow' their result.
- lane moves.
- byte swapping instructions.
- interleaving loads and stores.
- cross-beat carries.
- top/bottom instructions.
- complex operations.
Hopefully we should be able to add more of these instructions to the
whitelist, once we have a more concrete idea of the transform.
Differential Revision: https://reviews.llvm.org/D67904
llvm-svn: 374887
After r368065, all the tests using GISelMITest must call setUp() before
doing anything, otherwise the TargetMachine is not going to be set up.
A few tests added after that commit were not doing that and ended up
testing effectively nothing.
Fix the setup of all the tests and fix the failing tests.
llvm-svn: 374595
The target does just enough to be able to run llvm-exegesis in latency
mode for at least some opcodes.
Patch by Miloš Stojanović.
Differential Revision: https://reviews.llvm.org/D68649
llvm-svn: 374590
Teach buildMerge how to deal with scalar to vector kind of requests.
Prior to this patch, buildMerge would issue either a G_MERGE_VALUES
when all the vregs are scalars or a G_CONCAT_VECTORS when the destination
vreg is a vector.
G_CONCAT_VECTORS was actually not the proper instruction when the source
vregs were scalars and the compiler would assert that the sources must
be vectors. Instead we want is to issue a G_BUILD_VECTOR when we are
in this situation.
This patch fixes that.
llvm-svn: 374588
This patch adds a moveAfter method to VPRecipeBase, which can be used to
move elements after other elements, across VPBasicBlocks, if necessary.
Reviewers: dcaballe, hsaito, rengolin, hfinkel
Reviewed By: dcaballe
Differential Revision: https://reviews.llvm.org/D46825
llvm-svn: 374565
The intended usage is to measure relatively expensive operations. So the
cost of the statistic is negligible compared to the cost of a measured
operation and can be enabled all the time without impairing the
compilation time.
rdar://problem/55715134
Reviewers: dsanders, bogner, rtereshin
Reviewed By: dsanders
Subscribers: hiraditya, jkorous, dexonsmith, ributzka, cfe-commits, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D68252
llvm-svn: 374490
In GISel we have both G_CONSTANT and G_FCONSTANT, but because
in GISel we don't really have a concept of Float vs Int value
the only difference between the two is where the data originates
from.
What both G_CONSTANT and G_FCONSTANT return is just a bag of bits
with the constant representation in it.
By making getConstantVRegVal() return G_FCONSTANTs bit representation
as well we allow ConstantFold and other things to operate with
G_FCONSTANT.
Adding tests that show ConstantFolding to work on mixed G_CONSTANT
and G_FCONSTANT sources.
Differential Revision: https://reviews.llvm.org/D68739
llvm-svn: 374458
This improves readability of Windows path string literals in LLVM IR.
The LLVM assembler has supported \\ in IR strings for a long time, but
the lexer doesn't tolerate escaped quotes, so they have to be printed as
\22 for now.
llvm-svn: 374415
This patch adds the ability to create GSYM files with GsymCreator, and read them with GsymReader. Full testing has been added for both new classes.
This patch differs from the original patch https://reviews.llvm.org/D53379 in that is uses a StringTableBuilder class from llvm instead of a custom version. Support for big and little endian files has been added. If the endianness matches the current host, we use efficient extraction for the header, address table and address info offset tables.
Differential Revision: https://reviews.llvm.org/D68744
llvm-svn: 374381
This test is not defined.
FAIL: LLVM-Unit :: ADT/./ADTTests/ArrayRefTest.SizeTSizedOperations (178 of 33926)
******************** TEST 'LLVM-Unit :: ADT/./ADTTests/ArrayRefTest.SizeTSizedOperations' FAILED ********************
Note: Google Test filter = ArrayRefTest.SizeTSizedOperations
[==========] Running 1 test from 1 test case.
[----------] Global test environment set-up.
[----------] 1 test from ArrayRefTest
[ RUN ] ArrayRefTest.SizeTSizedOperations
/b/sanitizer-x86_64-linux-bootstrap-ubsan/build/llvm-project/llvm/include/llvm/ADT/ArrayRef.h:180:32: runtime error: applying non-zero offset 9223372036854775806 to null pointer
#0 0x5ae8dc in llvm::ArrayRef<char>::slice(unsigned long, unsigned long) const /b/sanitizer-x86_64-linux-bootstrap-ubsan/build/llvm-project/llvm/include/llvm/ADT/ArrayRef.h:180:32
#1 0x5ae44c in (anonymous namespace)::ArrayRefTest_SizeTSizedOperations_Test::TestBody() /b/sanitizer-x86_64-linux-bootstrap-ubsan/build/llvm-project/llvm/unittests/ADT/ArrayRefTest.cpp:85:3
#2 0x928a96 in testing::Test::Run() /b/sanitizer-x86_64-linux-bootstrap-ubsan/build/llvm-project/llvm/utils/unittest/googletest/src/gtest.cc:2474:5
#3 0x929793 in testing::TestInfo::Run() /b/sanitizer-x86_64-linux-bootstrap-ubsan/build/llvm-project/llvm/utils/unittest/googletest/src/gtest.cc:2656:11
#4 0x92a152 in testing::TestCase::Run() /b/sanitizer-x86_64-linux-bootstrap-ubsan/build/llvm-project/llvm/utils/unittest/googletest/src/gtest.cc:2774:28
#5 0x9319d2 in testing::internal::UnitTestImpl::RunAllTests() /b/sanitizer-x86_64-linux-bootstrap-ubsan/build/llvm-project/llvm/utils/unittest/googletest/src/gtest.cc:4649:43
#6 0x931416 in testing::UnitTest::Run() /b/sanitizer-x86_64-linux-bootstrap-ubsan/build/llvm-project/llvm/utils/unittest/googletest/src/gtest.cc:4257:10
#7 0x920ac3 in RUN_ALL_TESTS /b/sanitizer-x86_64-linux-bootstrap-ubsan/build/llvm-project/llvm/utils/unittest/googletest/include/gtest/gtest.h:2233:46
#8 0x920ac3 in main /b/sanitizer-x86_64-linux-bootstrap-ubsan/build/llvm-project/llvm/utils/unittest/UnitTestMain/TestMain.cpp:50:10
#9 0x7f66135b72e0 in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x202e0)
#10 0x472c19 in _start (/b/sanitizer-x86_64-linux-bootstrap-ubsan/build/llvm_build_ubsan/unittests/ADT/ADTTests+0x472c19)
SUMMARY: UndefinedBehaviorSanitizer: undefined-behavior /b/sanitizer-x86_64-linux-bootstrap-ubsan/build/llvm-project/llvm/include/llvm/ADT/ArrayRef.h:180:32 in
llvm-svn: 374327
Original Patch broke for compilations w/ gcc and exposed asan fail.
This reland repairs those bugs.
Differential Revision: https://reviews.llvm.org/D67529
llvm-svn: 374277
in ExtBinary format
Currently for Text, Binary and ExtBinary format profiles, when we compile a
module with samplefdo, even if there is no function showing up in the profile,
we have to load all the function profiles from the profile input. That is a
waste of compile time.
CompactBinary format profile has already had the support of loading function
profiles on demand. In this patch, we add the support to load profile on
demand for ExtBinary format. It will work no matter the sections in ExtBinary
format profile are compressed or not. Experiment shows it reduces the time to
compile a server benchmark by 30%.
When profile remapping and loading function profiles on demand are both used,
extra work needs to be done so that the loading on demand process will take
the name remapping into consideration. It will be addressed in a follow-up
patch.
Differential Revision: https://reviews.llvm.org/D68601
llvm-svn: 374233
David added the JamCRC implementation in r246590. More recently, Eugene
added a CRC-32 implementation in r357901, which falls back to zlib's
crc32 function if present.
These checksums are essentially the same, so having multiple
implementations seems unnecessary. This replaces the CRC-32
implementation with the simpler one from JamCRC, and implements the
JamCRC interface in terms of CRC-32 since this means it can use zlib's
implementation when available, saving a few bytes and potentially making
it faster.
JamCRC took an ArrayRef<char> argument, and CRC-32 took a StringRef.
This patch changes it to ArrayRef<uint8_t> which I think is the best
choice, and simplifies a few of the callers nicely.
Differential revision: https://reviews.llvm.org/D68570
llvm-svn: 374148
Factor out CodeExtractor's analysis of allocas (for shrinkwrapping
purposes), and allow the analysis to be reused.
This resolves a quadratic compile-time bug observed when compiling
AMDGPUDisassembler.cpp.o.
Pre-patch (Release + LTO clang):
```
---User Time--- --System Time-- --User+System-- ---Wall Time--- --- Name ---
176.5278 ( 57.8%) 0.4915 ( 18.5%) 177.0192 ( 57.4%) 177.4112 ( 57.3%) Hot Cold Splitting
```
Post-patch (ReleaseAsserts clang):
```
---User Time--- --System Time-- --User+System-- ---Wall Time--- --- Name ---
1.4051 ( 3.3%) 0.0079 ( 0.3%) 1.4129 ( 3.2%) 1.4129 ( 3.2%) Hot Cold Splitting
```
Testing: check-llvm, and comparing the AMDGPUDisassembler.cpp.o binary
pre- vs. post-patch.
An alternate approach is to hide CodeExtractorAnalysisCache from clients
of CodeExtractor, and to recompute the analysis from scratch inside of
CodeExtractor::extractCodeRegion(). This eliminates some redundant work
in the shrinkwrapping legality check. However, some clients continue to
exhibit O(n^2) compile time behavior as computing the analysis is O(n).
rdar://55912966
Differential Revision: https://reviews.llvm.org/D68616
llvm-svn: 374089
Summary:
This format introduces new features and platforms
The motivation for this format is to support more than 1 platform since previous versions only supported additional architectures and 1 platform,
for example ios + ios-simulator and macCatalyst.
Reviewers: ributzka, steven_wu
Reviewed By: ributzka
Subscribers: mgorny, hiraditya, mgrang, dexonsmith, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67529
llvm-svn: 374058
Summary:
This adds a `-max-configs-per-opcode` option to limit the number of
configs per opcode.
Reviewers: gchatelet
Subscribers: tschuett, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D68642
llvm-svn: 374054
Summary:
This patch adds the definitions of the constants and structures
necessary to interpret the MemoryInfoList minidump stream, as well as
the object::MinidumpFile interface to access the stream.
While the code is fairly simple, there is one important deviation from
the other minidump streams, which is worth calling out explicitly.
Unlike other "List" streams, the size of the records inside
MemoryInfoList stream is not known statically. Instead it is described
in the stream header. This makes it impossible to return
ArrayRef<MemoryInfo> from the accessor method, as it is done with other
streams. Instead, I create an iterator class, which can be parameterized
by the runtime size of the structure, and return
iterator_range<iterator> instead.
Reviewers: amccarth, jhenderson, clayborg
Subscribers: JosephTremoulet, zturner, markmentovai, lldb-commits, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D68210
llvm-svn: 374051
* Adds a TypeSize struct to represent the known minimum size of a type
along with a flag to indicate that the runtime size is a integer multiple
of that size
* Converts existing size query functions from Type.h and DataLayout.h to
return a TypeSize result
* Adds convenience methods (including a transparent conversion operator
to uint64_t) so that most existing code 'just works' as if the return
values were still scalars.
* Uses the new size queries along with ElementCount to ensure that all
supported instructions used with scalable vectors can be constructed
in IR.
Reviewers: hfinkel, lattner, rkruppe, greened, rovka, rengolin, sdesmalen
Reviewed By: rovka, sdesmalen
Differential Revision: https://reviews.llvm.org/D53137
llvm-svn: 374042
Summary:
Right now there are no snippet generators that emit the `Config` Field,
but I plan to add it to investigate LEA operands for PR32326.
What was broken was:
- `Config` Was not propagated up until the BenchmarkResult::Key.
- Clustering should really consider different configs as measuring
different things, so we should stabilize on (Opcode, Config) instead of
just Opcode.
Reviewers: gchatelet
Subscribers: tschuett, llvm-commits, lebedev.ri
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D68629
llvm-svn: 374031
Summary: The assertion in getLoopGuardBranch can be a 'return nullptr'
under if condition.
Authored By: DTharun
Reviewer: Whitney, fhahn
Reviewed By: Whitney, fhahn
Subscribers: fhahn, llvm-commits
Tag: LLVM
Differential Revision: https://reviews.llvm.org/D66084
llvm-svn: 373857
This looks like a defect in gcc-5 where it chooses a constexpr
constructor from the initializer-list that it considers to be explicit.
I've tried to reproduce but I can't install anything prior to gcc-6 easily
on my system, and that doesn't have the error. So this is speculative
pacification.
Reported by Steven Wan.
llvm-svn: 373820
Summary:
Fix initialization style of objects allocated on the stack and member
objects in unit test to use the "Type Var(init list)" and
"Type Member{init list}" convention. The latter fixes the buildbot
breakage.
Reviewers: jhenderson, probinson, arichardson, grimar, jdenny
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D68425
llvm-svn: 373755
Summary:
This patch introduces -gen-automata, a backend for generating deterministic finite-state automata.
DFAs are already generated by the -gen-dfa-packetizer backend. This backend is more generic and will
hopefully be used to implement the DFA generation (and determinization) for the packetizer in the
future.
This backend allows not only generation of a DFA from an NFA (nondeterministic finite-state
automaton), it also emits sidetables that allow a path through the DFA under a sequence of inputs to
be analyzed, and the equivalent set of all possible NFA transitions extracted.
This allows a user to not just answer "can my problem be solved?" but also "what is the
solution?". Clearly this analysis is more expensive than just playing a DFA forwards so is
opt-in. The DFAPacketizer has this behaviour already but this is a more compact and generic
representation.
Examples are bundled in unittests/TableGen/Automata.td. Some are trivial, but the BinPacking example
is a stripped-down version of the original target problem I set out to solve, where we pack values
(actually immediates) into bins (an immediate pool in a VLIW bundle) subject to a set of esoteric
constraints.
Reviewers: t.p.northover
Subscribers: mgorny, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67968
llvm-svn: 373718
Summary:
Fix initialization style of objects allocated on the stack in unit test
to use the "Type Var(init list)" convention.
Reviewers: jhenderson, probinson, arichardson, grimar, jdenny
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D68425
llvm-svn: 373717
In the Atom model the symbols, content and relocations of a relocatable object
file are represented as a graph of atoms, where each Atom represents a
contiguous block of content with a single name (or no name at all if the
content is anonymous), and where edges between Atoms represent relocations.
If more than one symbol is associated with a contiguous block of content then
the content is broken into multiple atoms and layout constraints (represented by
edges) are introduced to ensure that the content remains effectively contiguous.
These layout constraints must be kept in mind when examining the content
associated with a symbol (it may be spread over multiple atoms) or when applying
certain relocation types (e.g. MachO subtractors).
This patch replaces the Atom model in JITLink with a blocks-and-symbols model.
The blocks-and-symbols model represents relocatable object files as bipartite
graphs, with one set of nodes representing contiguous content (Blocks) and
another representing named or anonymous locations (Symbols) within a Block.
Relocations are represented as edges from Blocks to Symbols. This scheme
removes layout constraints (simplifying handling of MachO alt-entry symbols,
and hopefully ELF sections at some point in the future) and simplifies some
relocation logic.
llvm-svn: 373689
Summary:
This will handle expansion of C++ fragments in the declarative combiner
including custom predicates, and escapes into C++ to aid the migration
effort.
Fixed the -DLLVM_LINK_LLVM_DYLIB=ON using DISABLE_LLVM_LINK_LLVM_DYLIB when
creating the library. Apparently it automatically links to libLLVM.dylib
and we don't want that from tablegen.
Reviewers: bogner, volkan
Subscribers: mgorny, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D68288
> llvm-svn: 373551
llvm-svn: 373651
Adds support to AArch64FrameLowering to allocate fixed-stack SVE objects.
The focus of this patch is purely to allow the stack frame to
allocate/deallocate space for scalable SVE objects. More dynamic
allocation (at compile-time, i.e. determining placement of SVE objects
on the stack), or resolving frame-index references that include
scalable-sized offsets, are left for subsequent patches.
SVE objects are allocated in the stack frame as a separate region below
the callee-save area, and above the alignment gap. This is done so that
the SVE objects can be accessed directly from the FP at (runtime)
VL-based offsets to benefit from using the VL-scaled addressing modes.
The layout looks as follows:
+-------------+
| stack arg |
+-------------+
| Callee Saves|
| X29, X30 | (if available)
|-------------| <- FP (if available)
| : |
| SVE area |
| : |
+-------------+
|/////////////| alignment gap.
| : |
| Stack objs |
| : |
+-------------+ <- SP after call and frame-setup
SVE and non-SVE stack objects are distinguished using different
StackIDs. The offsets for objects with TargetStackID::SVEVector should be
interpreted as purely scalable offsets within their respective SVE region.
Reviewers: thegameg, rovka, t.p.northover, efriedma, rengolin, greened
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D61437
llvm-svn: 373585
Summary:
This will handle expansion of C++ fragments in the declarative combiner
including custom predicates, and escapes into C++ to aid the migration
effort.
Reviewers: bogner, volkan
Subscribers: mgorny, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D68288
llvm-svn: 373551
Terminators like invoke can have users outside the current basic block.
We have to replace those users with undef, before replacing the
terminator.
This fixes a crash exposed by rL373430.
Reviewers: brzycki, asbirlea, davide, spatel
Reviewed By: asbirlea
Differential Revision: https://reviews.llvm.org/D68327
llvm-svn: 373513
There are no users that pass in LazyValueInfo, so we can simplify the
function a bit.
Reviewers: brzycki, asbirlea, davide
Reviewed By: davide
Differential Revision: https://reviews.llvm.org/D68297
llvm-svn: 373488
Summary:
Most of the class definition in llvm/include/llvm/Support/FileCheck.h
are actually implementation details that should not be relied upon. This
commit moves all of it in a new header file under
llvm/lib/Support/FileCheck. It also takes advantage of the code movement
to put the code into a new llvm::filecheck namespace.
Reviewers: jhenderson, chandlerc, jdenny, probinson, grimar, arichardson, rnk
Subscribers: hiraditya, llvm-commits, probinson, dblaikie, grimar, arichardson, tra, rnk, kristina, hfinkel, rogfer01, JonChesterfield
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67649
llvm-svn: 373395
Existing clients are converted to use MachineModuleInfoWrapperPass. The
new interface is for defining a new pass manager API in CodeGen.
Reviewers: fedor.sergeev, philip.pfaffe, chandlerc, arsenm
Reviewed By: arsenm, fedor.sergeev
Differential Revision: https://reviews.llvm.org/D64183
llvm-svn: 373240
Summary:
Remove use of FileCheckPatternContext and FileCheckString concrete types
from FileCheck API to allow moving it and the other implementation only
only declarations into a private header file.
Reviewers: jhenderson, chandlerc, jdenny, probinson, grimar, arichardson, rnk
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D68186
llvm-svn: 373211
m_SExtOrSelf() is for consistency.
m_ZExtOrSExtOrSelf() is motivated by the D68103/r373106 :
sometimes it is useful to look past any extensions of the shift amount,
and m_ZExtOrSExtOrSelf() may be exactly the tool to do that.
llvm-svn: 373128
Summary:
Before this change the Executable function was made by duplicating the
snippet. This change adds a --repetion-mode={loop|duplicate} flag that
allows choosing between this behaviour and wrapping the snippet instructions
in a loop.
The new mode can help measurements when the snippet fits in the DSB by
short-cirtcuiting decoding. The loop adds a dec + jmp to the measurements, but
since these are not part of the critical path, they execute in parallel
with the measured code and do not impact measurements in practice.
Overview of the change:
- New SnippetRepetitor abstraction that handles repeating the snippet.
The assembler delegates repeating the instructions to this class.
- ExegesisTarget learns how to decrement loop counter and jump.
- Some refactoring of the assembler into FunctionFiller/BasicBlockFiller.
Reviewers: gchatelet
Subscribers: mgorny, tschuett, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D68125
llvm-svn: 373083
Summary:
Right now latency generation can incorrectly select the scratch register
as a dependency-carrying register.
- Move the logic for preventing register selection from Uops
implementation to common SnippetGenerator class.
- Aliasing detection now takes a set of forbidden registers just like
random register assignment does.
Reviewers: gchatelet
Subscribers: tschuett, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D68084
llvm-svn: 373048
Summary: As discussed in the loop group meeting. With the current
definition of loop guard, we should not allow multiple loop exiting
blocks. For loops that has multiple loop exiting blocks, we can simply
unable to find the loop guard.
When getUniqueExitBlock() obtains a vector size not equals to one, that
means there is either no exit blocks or there exists more than one
unique block the loop exit to.
If we don't disallow loop with multiple loop exit blocks, then with our
current implementation, there can exist exit blocks don't post dominated
by the non pre-header successor of the guard block.
Reviewer: reames, Meinersbur, kbarton, etiotto, bmahjour
Reviewed By: Meinersbur, kbarton
Subscribers: fhahn, hiraditya, llvm-commits
Tag: LLVM
Differential Revision: https://reviews.llvm.org/D66529
llvm-svn: 373011
Currently m_Br only takes references to BasicBlock*, which limits its
flexibility. For example, you have to declare a variable, even if you
ignore the result or you have to have additional checks to make sure the
matched BB matches an expected one.
This patch adds m_BasicBlock and m_SpecificBB matchers, which can be
used like the existing matchers for constants or values.
I also had a look at the existing uses and updated a few. IMO it makes
the code a bit more explicit.
Reviewers: spatel, craig.topper, RKSimon, majnemer, lebedev.ri
Reviewed By: lebedev.ri
Differential Revision: https://reviews.llvm.org/D68013
llvm-svn: 372885
The changes here are based on the corresponding diffs for allowing FMF on 'select':
D61917 <https://reviews.llvm.org/D61917>
As discussed there, we want to have fast-math-flags be a property of an FP value
because the alternative (having them on things like fcmp) leads to logical
inconsistency such as:
https://bugs.llvm.org/show_bug.cgi?id=38086
The earlier patch for select made almost no practical difference because most
unoptimized conditional code begins life as a phi (based on what I see in clang).
Similarly, I don't expect this patch to do much on its own either because
SimplifyCFG promptly drops the flags when converting to select on a minimal
example like:
https://bugs.llvm.org/show_bug.cgi?id=39535
But once we have this plumbing in place, we should be able to wire up the FMF
propagation and start solving cases like that.
The change to RecurrenceDescriptor::AddReductionVar() is required to prevent a
regression in a LoopVectorize test. We are intersecting the FMF of any
FPMathOperator there, so if a phi is not properly annotated, new math
instructions may not be either. Once we fix the propagation in SimplifyCFG, it
may be safe to remove that hack.
Differential Revision: https://reviews.llvm.org/D67564
llvm-svn: 372878
The changes here are based on the corresponding diffs for allowing FMF on 'select':
D61917
As discussed there, we want to have fast-math-flags be a property of an FP value
because the alternative (having them on things like fcmp) leads to logical
inconsistency such as:
https://bugs.llvm.org/show_bug.cgi?id=38086
The earlier patch for select made almost no practical difference because most
unoptimized conditional code begins life as a phi (based on what I see in clang).
Similarly, I don't expect this patch to do much on its own either because
SimplifyCFG promptly drops the flags when converting to select on a minimal
example like:
https://bugs.llvm.org/show_bug.cgi?id=39535
But once we have this plumbing in place, we should be able to wire up the FMF
propagation and start solving cases like that.
The change to RecurrenceDescriptor::AddReductionVar() is required to prevent a
regression in a LoopVectorize test. We are intersecting the FMF of any
FPMathOperator there, so if a phi is not properly annotated, new math
instructions may not be either. Once we fix the propagation in SimplifyCFG, it
may be safe to remove that hack.
Differential Revision: https://reviews.llvm.org/D67564
llvm-svn: 372866
Summary: This patch introduces simulators, as well was the restriced zippered and macCatalyst to supported platforms
Reviewers: ributzka, steven_wu
Reviewed By: ributzka
Subscribers: hiraditya, dexonsmith, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67528
llvm-svn: 372618
Summary:
This is a patch for updating TextAPI/Macho to read in targets as opposed to arch/platform.
This is because in previous versions tbd files only supported a single platform but that is no longer the case,
so, now its tracked by unique triples.
This precedes a seperate patch that will add the TBD-v4 format
Reviewers: ributzka, steven_wu, plotfi, compnerd, smeenai
Reviewed By: ributzka
Subscribers: mgorny, hiraditya, dexonsmith, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67527
llvm-svn: 372396
The insertion of an unconditional branch during FastISel can differ depending on
building with or without debug information. This happens because FastISel::fastEmitBranch
emits an unconditional branch depending on the size of the current basic block
without distinguishing between debug and non-debug instructions.
This patch fixes this issue by ignoring debug instructions when getting the size
of the basic block.
Reviewers: aprantl
Reviewed By: aprantl
Subscribers: ormris, aprantl, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67703
llvm-svn: 372389
This patch implements the demangling functionality as described in the
Vector Function ABI. This patch will be used to implement the
SearchVectorFunctionSystem (SVFS) as described in the RFC:
http://lists.llvm.org/pipermail/llvm-dev/2019-June/133484.html
A fuzzer is added to test the demangling utility.
Patch by Sumedh Arani <sumedh.arani@arm.com>
Differential revision: https://reviews.llvm.org/D66024
llvm-svn: 372343
Summary:
Add function to AutoUpgrade to change the datalayout of old X86 datalayout strings.
This adds "-p270:32:32-p271:32:32-p272:64:64" to X86 datalayouts that are otherwise valid
and don't already contain it.
This also removes the compatibility changes in https://reviews.llvm.org/D66843.
Datalayout change in https://reviews.llvm.org/D64931.
Reviewers: rnk, echristo
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67631
llvm-svn: 372267
Summary:
Also fixup rL371928 for cases that occur on our out-of-tree backend
There were still quite a few intermediate APInts and this caused the
compile time of MCCodeEmitter for our target to jump from 16s up to
~5m40s. This patch, brings it back down to ~17s by eliminating pretty
much all of them using two new APInt functions (extractBitsAsZExtValue(),
insertBits() but with a uint64_t). The exact conditions for eliminating
them is that the field extracted/inserted must be <=64-bit which is
almost always true.
Note: The two new APInt API's assume that APInt::WordSize is at least
64-bit because that means they touch at most 2 APInt words. They
statically assert that's true. It seems very unlikely that someone
is patching it to be smaller so this should be fine.
Reviewers: jmolloy
Reviewed By: jmolloy
Subscribers: hiraditya, dexonsmith, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67686
llvm-svn: 372243
This patch adds the llvm::gsym::Header class which appears at the start of a stand alone GSYM file, or in the first bytes of the GSYM data in a GSYM section within a file. Added encode and decode methods with full error handling and full tests.
Differential Revision: https://reviews.llvm.org/D67666
llvm-svn: 372149
This patch adds encoding and decoding of the FunctionInfo objects along with full error handling and tests. Full details of the FunctionInfo encoding format appear in the FunctionInfo.h header file.
Differential Revision: https://reviews.llvm.org/D67506
llvm-svn: 372135
Set this bit for the MVE reduction instructions to prevent a loop from
becoming tail predicated in their presence.
Differential Revision: https://reviews.llvm.org/D67444
llvm-svn: 372076
It should be allowed to take a string table in case all the strings in
the remarks point there, but it shouldn't use it during serialization.
llvm-svn: 372042
This is a continuation of the YAML library error reporting
refactoring/improvement and the idea by itself was mentioned
in the following thread:
https://reviews.llvm.org/D67182?id=218714#inline-603404
This performs a cleanup of all object emitters in the library.
It allows using the custom one provided by the caller.
One of the nice things is that each tool can now print its tool name,
e.g: "yaml2obj: error: <text>"
Also, the code became a bit simpler.
Differential revision: https://reviews.llvm.org/D67445
llvm-svn: 371865
This patch adds the ability to create a gsym::LineTable object, populate it, encode and decode it and test all functionality.
The full format of the LineTable encoding is specified in the header file LineTable.h.
Differential Revision: https://reviews.llvm.org/D66602
llvm-svn: 371657
This is a follow-up of rL369529, where the return value of
DWARFUnit::getLength() was changed from uint32_t to uint64_t.
The test checks that a unit header with Length > 4G can be successfully
parsed and the value of the Length field is not truncated.
Differential Revision: https://reviews.llvm.org/D67276
llvm-svn: 371510
This is a follow-up of rL369529, where the return value of
DWARFUnit::getLength() was changed from uint32_t to uint64_t.
The test checks that a unit header with Length > 4G can be successfully
parsed and the value of the Length field is not truncated.
Differential Revision: https://reviews.llvm.org/D67276
llvm-svn: 371499
The bitstream remark serializer landed in r367372.
This adds a bitstream remark parser that parser bitstream remark files
to llvm::remarks::Remark objects through the RemarkParser interface.
A few interesting things to point out:
* There are parsing helpers to parse the different types of blocks
* The main parsing helper allows us to parse remark metadata and open an
external file containing the encoded remarks
* This adds a dependency from the Remarks library to the BitstreamReader
library
* The testing strategy is to create a remark entry through YAML, parse
it, serialize it to bitstream, parse that back and compare the objects.
* There are close to no tests for malformed bitstream remarks, due to
the lack of textual format for the bitstream format.
* This adds a new C API for parsing bitstream remarks:
LLVMRemarkParserCreateBitstream.
* This bumps the REMARKS_API_VERSION to 1.
Differential Revision: https://reviews.llvm.org/D67134
llvm-svn: 371429
Summary:
This is the first change to enable the TLI to be built per-function so
that -fno-builtin* handling can be migrated to use function attributes.
See discussion on D61634 for background. This is an enabler for fixing
handling of these options for LTO, for example.
This change should not affect behavior, as the provided function is not
yet used to build a specifically per-function TLI, but rather enables
that migration.
Most of the changes were very mechanical, e.g. passing a Function to the
legacy analysis pass's getTLI interface, or in Module level cases,
adding a callback. This is similar to the way the per-function TTI
analysis works.
There was one place where we were looking for builtins but not in the
context of a specific function. See FindCXAAtExit in
lib/Transforms/IPO/GlobalOpt.cpp. I'm somewhat concerned my workaround
could provide the wrong behavior in some corner cases. Suggestions
welcome.
Reviewers: chandlerc, hfinkel
Subscribers: arsenm, dschuff, jvesely, nhaehnle, mehdi_amini, javed.absar, sbc100, jgravelle-google, eraman, aheejin, steven_wu, george.burgess.iv, dexonsmith, jfb, asbirlea, gchatelet, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D66428
llvm-svn: 371284
Summary:
There's an unspoken invariant of callbr that the list of BlockAddress
Constants in the "function args" list match the BasicBlocks in the
"other labels" list. (This invariant is being added to the LangRef in
https://reviews.llvm.org/D67196).
When modifying the any of the indirect destinations of a callbr
instruction (possible jump targets), we need to update the function
arguments if the argument is a BlockAddress whose BasicBlock refers to
the indirect destination BasicBlock being replaced. Otherwise, many
transforms that modify successors will end up violating that invariant.
A recent change to the arm64 Linux kernel exposed this bug, which
prevents the kernel from booting.
I considered maintaining a mapping from indirect destination BasicBlock
to argument operand BlockAddress, but this ends up being a one to
potentially many (though usually one) mapping. Also, the list of
arguments to a function (or more typically inline assembly) ends up
being less than 10. The implementation is significantly simpler to just
rescan the full list of arguments. Because of the one to potentially
many relationship, the full arg list must be scanned (we can't stop at
the first instance).
Thanks to the following folks that reported the issue and helped debug
it:
* Nathan Chancellor
* Will Deacon
* Andrew Murray
* Craig Topper
Link: https://bugs.llvm.org/show_bug.cgi?id=43222
Link: https://github.com/ClangBuiltLinux/linux/issues/649
Link: https://lists.infradead.org/pipermail/linux-arm-kernel/2019-September/678330.html
Reviewers: craig.topper, chandlerc
Reviewed By: craig.topper
Subscribers: void, javed.absar, kristof.beyls, hiraditya, llvm-commits, nathanchance, srhines
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67252
llvm-svn: 371262
ORC-RPC batches calls by default, and the channel's send method must be called
to transfer any buffered calls to the remote. The call to send was missing on
responses and blocking calls in the SingleThreadedRPCEndpoint. This patch adds
the necessary calls and modifies the RPC unit test to check for them.
llvm-svn: 371245
The IRBuilder doesn't know that the two floating point to integer instructions
have constrained equivalents. This patch adds the support by building on
the strict FP mode now present in the IRBuilder.
Reviewed by: John McCall
Approved by: John McCall
Differential Revision: https://reviews.llvm.org/D67291
llvm-svn: 371235
In order to keep remarks around, we need to make them tied to a string
table.
Users then can delete the parser and rely on the string table to keep
the memory of the strings alive and deduplicated.
llvm-svn: 371233
Passing INT64_MIN to MCInstPrinter::formatHex triggers undefined
behavior because the negation of -9223372036854775808 cannot be
represented in type 'int64_t' (aka 'long long'). This patch puts a
workaround in place to just print the hex value directly.
A possible alternative involves using a small helper functions that uses
(implementation) defined conversions to achieve the desirable value:
static int64_t helper(int64_t V) {
auto U = static_cast<uint64_t>(V);
return V < 0 ? -U : U;
}
The underlying problem is that MCInstPrinter::formatHex(int64_t) returns
a format_object<int64_t> and should really return a
format_object<uint64_t>. However, that's not possible because formatImm
needs to be able to print both as decimal (where a signed is required)
and hex (where we'd prefer to always have an unsigned).
format_object<int64_t> formatImm(int64_t Value) const {
return PrintImmHex ? formatHex(Value) : formatDec(Value);
}
Differential revision: https://reviews.llvm.org/D67236
llvm-svn: 371159
Now that we look through copies, it's possible to visit registers that
have a register class constraint but not a type constraint. Avoid looking
through copies when this occurs as the SrcReg won't be able to determine
it's bit width or any known bits.
Along the same lines, if the initial query is on a register that doesn't
have a type constraint then the result is a default-constructed KnownBits,
that is, a 1-bit fully-unknown value.
llvm-svn: 371116
This patch adds the ability to encode and decode InlineInfo objects and adds test coverage. Error handling is introduced in the encoding and decoding which will be used from here on out for remaining patches.
Differential Revision: https://reviews.llvm.org/D66600
llvm-svn: 370936
Summary:
Commit r366897 introduced the possibility to set a variable from an
expression, such as [[#VAR2:VAR1+3]]. While introducing this feature, it
introduced extra logic to allow using such a variable on the same line
later on. Unfortunately that extra logic is flawed as it relies on a
mapping from variable to expression defining it when the mapping is from
variable definition to expression. This flaw causes among other issues
PR42896.
This commit avoids the problem by forbidding all use of a variable
defined on the same line, and removes the now useless logic. Redesign
will be done in a later commit because it will require some amount of
refactoring first for the solution to be clean. One example is the need
for some sort of transaction mechanism to set a variable temporarily and
from an expression and rollback if the CHECK pattern does not match so
that diagnostics show the right variable values.
Reviewers: jhenderson, chandlerc, jdenny, probinson, grimar, arichardson, rnk
Subscribers: JonChesterfield, rogfer01, hfinkel, kristina, rnk, tra, arichardson, grimar, dblaikie, probinson, llvm-commits, hiraditya
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D66141
llvm-svn: 370663
cold versus function being newly added.
This is the second half of https://reviews.llvm.org/D66374.
Profile symbol list is the collection of function symbols showing up in
the binary which generates the current profile. It is used to discriminate
function being cold versus function being newly added. Profile symbol list
is only added for profile with ExtBinary format.
During profile use compilation, when profile-sample-accurate is enabled,
a function without profile will be regarded as cold only when it is
contained in that list.
Differential Revision: https://reviews.llvm.org/D66766
llvm-svn: 370563
Summary:
It is not used. It uses macro-based unrolling instead of variadic
templates, so it is not idiomatic anymore, and therefore it is a
questionable API to keep "just in case".
Subscribers: mgorny, dmgreen, dexonsmith, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D66961
llvm-svn: 370441
...cloning a function from a different module
Currently when a function with debug info is cloned from a different module, the
cloned function may have hanging DICompileUnits, so that the module with the
cloned function fails debug info verification.
The proposed fix inserts all DICompileUnits reachable from the cloned function
to "llvm.dbg.cu" metadata operands of the cloned function module.
Reviewed By: aprantl, efriedma
Differential Revision: https://reviews.llvm.org/D66510
Patch by Oleg Pliss (Oleg.Pliss@azul.com)
llvm-svn: 370265
Summary:
This patch adds support for scalable vectors in intrinsics, enabling
intrinsics such as the following to be defined:
declare <vscale x 4 x i32> @llvm.something.nxv4i32(<vscale x 4 x i32>)
Support for this is implemented by defining a new type descriptor for
scalable vectors and adding mangling support for scalable vector types
in the name mangling scheme used by 'any' types in intrinsic signatures.
Tests have been added for IRBuilder to test scalable vectors work as
expected when using intrinsics through this interface. This required
implementing an intrinsic that is explicitly defined with scalable
vectors, e.g. LLVMType<nxv4i32>, an SVE floating-point convert
intrinsic was used for this. The behaviour of the overloaded type
LLVMScalarOrSameVectorWidth with scalable vectors is tested using the
existing masked load intrinsic. Also added an .ll test to test the
Verifier catches a bad intrinsic argument when passing a fixed-width
predicate (mask) to the masked.load intrinsic where a scalable is
expected.
Patch by Paul Walker
Reviewed By: sdesmalen
Differential Revision: https://reviews.llvm.org/D65930
llvm-svn: 370053
Summary:
This is motivated by D63591, where we realized that there isn't a really
good way of telling whether a DataExtractor is reading actual data, or
is it just returning default values because it reached the end of the
buffer.
This patch resolves that by providing a new "Cursor" class. A Cursor
object encapsulates two things:
- the current position/offset in the DataExtractor
- an error object
Storing the error object inside the Cursor enables one to use the same
pattern as the std::{io}stream API, where one can blindly perform a
sequence of reads and only check for errors once at the end of the
operation. Similarly to the stream API, as soon as we encounter one
error, all of the subsequent operations are skipped (return default
values) too, even if the would suceed with clear error state. Unlike the
std::stream API (but in line with other llvm APIs), we force the error
state to be checked through usage of llvm::Error.
Reviewers: probinson, dblaikie, JDevlieghere, aprantl, echristo
Subscribers: kristina, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D63713
llvm-svn: 370042
In r369808 the failure scheme for ORC symbols was changed to make
MaterializationResponsibility objects responsible for failing the symbols
they represented. This simplifies error logic in the case where symbols are
still covered by a MaterializationResponsibility, but left a gap in error
handling: Symbols that have been emitted but are not yet ready (due to a
dependence on some unemitted symbol) are not covered by a
MaterializationResponsibility object. Under the scheme introduced in r369808
such symbols would be moved to the error state, but queries on those symbols
were never notified. This led to deadlocks when such symbols were failed.
This commit updates error logic to immediately fail queries on any symbol that
has already been emitted if one of its dependencies fails.
llvm-svn: 369976
Symbols that have not been queried will not have MaterializingInfo entries,
so remove the assert that all failed symbols should have these entries.
Also updates the loop to only remove entries that were found earlier.
llvm-svn: 369975
This should let us get rid of StringLiteral in the long term and avoid
chasing accidental StringRef globals once and for all.
This requires C++14, I godbolted it on every compiler I know we support
so I hope there won't be much fallout.
llvm-svn: 369961
If the dependencies are not removed then a late failure (one symbol covered by
the query failing after others have already been resolved) can result in an
attempt to detach the query from already finalized symbol, resulting in an
assert/crash. This patch fixes the issue by removing query dependencies in
JITDylib::resolve for symbols that meet the required state.
llvm-svn: 369809
When symbols are failed (via MaterializationResponsibility::failMaterialization)
any symbols depending on them will now be moved to an error state. Attempting
to resolve or emit a symbol in the error state (via the notifyResolved or
notifyEmitted methods on MaterializationResponsibility) will result in an error.
If notifyResolved or notifyEmitted return an error due to failure of a
dependence then the caller should log or discard the error and call
failMaterialization to propagate the failure to any queries waiting on the
symbols being resolved/emitted (plus their dependencies).
llvm-svn: 369808
This is a patch split from https://reviews.llvm.org/D66374. It tries to add
a new format of profile called ExtBinary. The format adds a section header
table to the profile and organize the profile in sections, so the future
extension like adding a new section or extending an existing section will be
easier while keeping backward compatiblity feasible.
Differential Revision: https://reviews.llvm.org/D66513
llvm-svn: 369798
Summary:
There was a subtle, but pretty important difference between the Slice
and regular versions of this function. The Slice function was
zero-initializing the rest of the buffer when the read syscall returned
less bytes than expected, while the regular function did not.
This patch removes the inconsistency by making both functions *not*
zero-initialize the buffer. The zeroing code is moved to the
MemoryBuffer class, which is currently the only user of this code. This
makes the API more consistent, and the code shorter.
While in there, I also refactor the functions to return the number of
bytes through the regular return value (via Expected<size_t>) instead of
a separate by-ref argument.
Reviewers: aganea, rnk
Subscribers: kristina, Bigcheese, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D66471
llvm-svn: 369627
The full GSYM patch started with: https://reviews.llvm.org/D53379
This patch add the ability to encode data using the new llvm::gsym::FileWriter class.
FileWriter is a simplified binary data writer class that doesn't require targets, target definitions, architectures, or require any other optional compile time libraries to be enabled via the build process. This class needs the ability to seek to different spots in the binary data that it produces to fix up offsets and sizes in GSYM data. It currently uses std::ostream over llvm::raw_ostream because llvm::raw_ostream doesn't support seeking which is required when encoding and decoding GSYM data.
AddressRange objects are encoded and decoded to be relative to a base address. This will be the FunctionInfo's start address if the AddressRange is directly contained in a FunctionInfo, or a base address of the containing parent AddressRange or AddressRanges. This allows address ranges to be efficiently encoded using ULEB128 encodings as we encode the offset and size of each range instead of full addresses. This also makes encoded addresses easy to relocate as we just need to relocate one base address.
Differential Revision: https://reviews.llvm.org/D63828
llvm-svn: 369587
Summary:
Tapi files are YAML files that start with the !tapi tag. The only execption are
TBD v1 files, which don't have a tag. In that case we have to scan a little
further and check if the first key "archs" exists.
This is the first patch in a series of patches to add libObject support for
text-based dynamic library (.tbd) files.
This patch is practically exactly the same as D37820, that was never pushed to master,
and is needed for future commits related to reading tbd files for llvm-nm
Reviewers: ributzka, steven_wu, bollu, espindola, jfb, shafik, jdoerfert
Reviewed By: steven_wu
Subscribers: dexonsmith, llvm-commits
Tags: #llvm, #clang, #sanitizers, #lldb, #libc, #openmp
Differential Revision: https://reviews.llvm.org/D66149
llvm-svn: 369579
Renames GTEST_NO_LLVM_RAW_OSTREAM -> GTEST_NO_LLVM_SUPPORT and guards
the new features behind it.
This reverts commit a063bcf3ef5a879adbe9639a3c187d876eee0e66.
llvm-svn: 369527
Summary:
These are detected by gtest as containers, and so previously printed as e.g.
{ '.' (46, 0x2E), 's' (115, 0x73), 'e' (101, 0x65), 'c' (99, 0x63), '0' (48, 0x30) },
gtest itself overloads PrintTo for std::string and friends, we use the same mechanism.
Reviewers: labath
Subscribers: dexonsmith, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D66520
llvm-svn: 369518
Summary:
The code for serializing minidumps was living in MinidumpYAML.cpp
so that it would be accessible from unit tests. While this had its
advantages, it was also unfortunate because it broke symmetry with all
other yaml2obj serializers.
Fortunately, nowadays all of yaml2obj is a library, so we don't need to
do anything special. This patch improves the code consistency by moving
the serialization code to MinidumpEmitter.cpp to match the style used in
other backends. It also removes the writeAsBinary entry point in favor
of the more general convertYAML interface.
This patch is just massaging the code a bit. There shouldn't be any
functional change here.
Reviewers: jhenderson, abrachet
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D66474
llvm-svn: 369517
In particular, make TinyPtrVector<PtrIntPair<T *, 1>> work. Remove all
unnecessary assumptions that the element type has a formal "null"
representation. The important property to maintain is that
default-constructed element type has the same internal representation
as the default-constructed PointerUnion (all zero bits).
Remove the incorrect recursive behavior from
PointerUnion::isNull. This was never generally correct because it only
recursed over the first type parameter. With variadic templates it's
completely unnecessary.
llvm-svn: 369473
This recommits r368977, which was reverted in r369027 due to test
failures in lldb. The cause of this was different behavior of
readNativeFileSlice on windows and unix. These have been addressed in
r369269.
The original commit message was:
In case the function was called with a desired read size *and* the file
was not an "mmap()" candidate, the function was falling back to a
"pread()", but it was failing to check the result of that system call.
This meant that the function would return "success" even though the read
operation failed, and it returned a buffer full of uninitialized memory.
Reviewers: rnk, dblaikie
Subscribers: kristina, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D66224
llvm-svn: 369370
Summary:
rL367756 (f5c40cb) increases the dependency of LLVMOrcJIT on LLVMPasses.
In particular, symbols defined in LLVMPasses that are referenced by the
destructor of `PassBuilder` are now referenced by LLVMOrcJIT through
`Speculation.cpp.o`.
We believe that referencing symbols defined in LLVMPasses in the
destructor of `PassBuilder` is valid, and that adding to the set of such
symbols is legitimate. To support such cases, this patch adds LLVMPasses
to the set of libraries being linked when linking in LLVMOrcJIT causes
such symbols from LLVMPasses to be referenced.
Reviewers: Whitney, anhtuyen, pree-jackie
Reviewed By: pree-jackie
Subscribers: mgorny, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D66441
llvm-svn: 369310
Summary:
The windows version implementation of readNativeFileSlice, was trying to
match the POSIX behavior of not treating EOF as an error, but it was
only handling the case of reading from a pipe. Attempting to read past
the end of a regular file returns a slightly different error code, which
needs to be handled too. This patch adds ERROR_HANDLE_EOF to the list of
error codes to be treated as an end of file, and adds some unit tests
for the API.
This issue was found while attempting to land D66224, which caused a bunch of
lldb tests to start failing on windows.
Reviewers: rnk, aganea
Subscribers: kristina, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D66344
llvm-svn: 369269
All uses of llvm::make_unique should have been replaced with
std::make_unique. This patch represents the last part of the migration
and removes the utility from LLVM.
Differential revision: https://reviews.llvm.org/D66259
llvm-svn: 369130
Summary:
To be able to use the TextAPI/Reader for tbd file consumption (by libObject)
it gets passed a MemoryBufferRef which isn't castable to MemoryBuffer.
Updated the tests to expect that input as well.
Reviewers: ributzka, steven_wu
Reviewed By: steven_wu
Subscribers: hiraditya, dexonsmith, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D66147
llvm-svn: 369119
Now that we've moved to C++14, we no longer need the llvm::make_unique
implementation from STLExtras.h. This patch is a mechanical replacement
of (hopefully) all the llvm::make_unique instances across the monorepo.
llvm-svn: 369013
Summary:
In case the function was called with a desired read size *and* the file
was not an "mmap()" candidate, the function was falling back to a
"pread()", but it was failing to check the result of that system call.
This meant that the function would return "success" even though the read
operation failed, and it returned a buffer full of uninitialized memory.
Reviewers: rnk, dblaikie
Subscribers: kristina, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D66224
llvm-svn: 368977
This reverts commit r368849, because it breaks some bots (e.g.
llvm-clang-x86_64-win-fast).
It turns out this is not as NFC as we had hoped, because operator== will
consider two std::error_codes to be distinct even though they both hold
"success" values if they have different categories.
llvm-svn: 368854
Summary:
The main motivation for this is unit tests, which contain a large macro
for pretty-printing std::error_code, and this macro is duplicated in
every file that needs to do this. However, the functionality may be
useful elsewhere too.
In this patch I have reimplemented the existing ASSERT_NO_ERROR macros
to reuse the new functionality, but I have kept the macro (as a
one-liner) as it is slightly more readable than ASSERT_EQ(...,
std::error_code()).
Reviewers: sammccall, ilya-biryukov
Subscribers: zturner, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65643
llvm-svn: 368849
This patch replaces the JITDylib::DefinitionGenerator typedef with a class of
the same name, and adds support for attaching a sequence of DefinitionGeneration
objects to a JITDylib.
This patch also adds a new definition generator,
StaticLibraryDefinitionGenerator, that can be used to add symbols fom a static
library to a JITDylib. An object from the static library will be added (via
a supplied ObjectLayer reference) whenever a symbol from that object is
referenced.
To enable testing, lli is updated to add support for the --extra-archive option
when running in -jit-kind=orc-lazy mode.
llvm-svn: 368707
- There was a simple typo in TextStub code that prevented version 3 files to be read.
- Included a version 3 unit test to handle the differences in the format.
- Also a typo in Error.h inside the comments.
https://reviews.llvm.org/D66041
This patch is from Cyndy Ishida <cyndy_ishida@apple.com>.
llvm-svn: 368630
https://reviews.llvm.org/D66039
We were using getIndexSize instead of getIndexSizeInBits().
Added test case for G_PTRTOINT and G_INTTOPTR.
llvm-svn: 368618
Summary:
Targets often have instructions that can sign-extend certain cases faster
than the equivalent shift-left/arithmetic-shift-right. Such cases can be
identified by matching a shift-left/shift-right pair but there are some
issues with this in the context of combines. For example, suppose you can
sign-extend 8-bit up to 32-bit with a target extend instruction.
%1:_(s32) = G_SHL %0:_(s32), i32 24 # (I've inlined the G_CONSTANT for brevity)
%2:_(s32) = G_ASHR %1:_(s32), i32 24
%3:_(s32) = G_ASHR %2:_(s32), i32 1
would reasonably combine to:
%1:_(s32) = G_SHL %0:_(s32), i32 24
%2:_(s32) = G_ASHR %1:_(s32), i32 25
which no longer matches the special case. If your shifts and extend are
equal cost, this would break even as a pair of shifts but if your shift is
more expensive than the extend then it's cheaper as:
%2:_(s32) = G_SEXT_INREG %0:_(s32), i32 8
%3:_(s32) = G_ASHR %2:_(s32), i32 1
It's possible to match the shift-pair in ISel and emit an extend and ashr.
However, this is far from the only way to break this shift pair and make
it hard to match the extends. Another example is that with the right
known-zeros, this:
%1:_(s32) = G_SHL %0:_(s32), i32 24
%2:_(s32) = G_ASHR %1:_(s32), i32 24
%3:_(s32) = G_MUL %2:_(s32), i32 2
can become:
%1:_(s32) = G_SHL %0:_(s32), i32 24
%2:_(s32) = G_ASHR %1:_(s32), i32 23
All upstream targets have been configured to lower it to the current
G_SHL,G_ASHR pair but will likely want to make it legal in some cases to
handle their faster cases.
To follow-up: Provide a way to legalize based on the constant. At the
moment, I'm thinking that the best way to achieve this is to provide the
MI in LegalityQuery but that opens the door to breaking core principles
of the legalizer (legality is not context sensitive). That said, it's
worth noting that looking at other instructions and acting on that
information doesn't violate this principle in itself. It's only a
violation if, at the end of legalization, a pass that checks legality
without being able to see the context would say an instruction might not be
legal. That's a fairly subtle distinction so to give a concrete example,
saying %2 in:
%1 = G_CONSTANT 16
%2 = G_SEXT_INREG %0, %1
is legal is in violation of that principle if the legality of %2 depends
on %1 being constant and/or being 16. However, legalizing to either:
%2 = G_SEXT_INREG %0, 16
or:
%1 = G_CONSTANT 16
%2:_(s32) = G_SHL %0, %1
%3:_(s32) = G_ASHR %2, %1
depending on whether %1 is constant and 16 does not violate that principle
since both outputs are genuinely legal.
Reviewers: bogner, aditya_nandakumar, volkan, aemerson, paquette, arsenm
Subscribers: sdardis, jvesely, wdng, nhaehnle, rovka, kristof.beyls, javed.absar, hiraditya, jrtc27, atanasyan, Petar.Avramovic, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D61289
llvm-svn: 368487
Without this patch computeConstantDifference returns None for cases like
these:
computeConstantDifference(%x, %x)
computeConstantDifference({%x,+,16}, {%x,+,16})
Differential Revision: https://reviews.llvm.org/D65474
llvm-svn: 368193
Some of these names were abbreviated, some were not, some pluralised,
some not. Made the API difficult to use - since it's an exact 1:1
mapping to the DWARF sections - use those names (changing underscore
separation for camel casing).
llvm-svn: 368189
https://reviews.llvm.org/D65698
This adds a KnownBits analysis pass for GISel. This was done as a
pass (compared to static functions) so that we can add other features
such as caching queries(within a pass and across passes) in the future.
This patch only adds the basic pass boiler plate, and implements a lazy
non caching knownbits implementation (ported from SelectionDAG). I've
also hooked up the AArch64PreLegalizerCombiner pass to use this - there
should be no compile time regression as the analysis is lazy.
llvm-svn: 368065
This fixes a bug for making path with a //net style root absolute. I
discovered the bug while writing a test case for the VFS, which uses
these paths because they're both legal absolute paths on Windows and
Unix.
Differential revision: https://reviews.llvm.org/D65675
llvm-svn: 368053
To support spilling/filling of scalable vectors we need a more generic
representation of a stack offset than simply 'int'.
For this we introduce the StackOffset struct, which comprises multiple
offsets sized by their respective MVTs. Byte-offsets will thus be a simple
tuple such as { offset, MVT::i8 }. Adding two byte-offsets will result in a
byte offset { offsetA + offsetB, MVT::i8 }. When two offsets have different
types, we can canonicalise them to use the same MVT, as long as their
runtime sizes are guaranteed to have the same size-ratio as they would have
at compile-time.
When we have both scalable- and fixed-size objects on the stack, we can
create an offset that is:
({ offset_fixed, MVT::i8 } + { offset_scalable, MVT::nxv1i8 })
The struct also contains a getForFrameOffset() method that is specific to
AArch64 and decomposes the frame-offset to be used directly in instructions
that operate on the stack or index into the stack.
Note: This patch adds StackOffset as an AArch64-only concept, but we would
like to make this a generic concept/struct that is supported by all
interfaces that take or return stack offsets (currently as 'int'). Since
that would be a bigger change that is currently pending on D32530 landing,
we thought it makes sense to first show/prove the concept in the AArch64
target before proposing to roll this out further.
Reviewers: thegameg, rovka, t.p.northover, efriedma, greened
Reviewed By: rovka, greened
Differential Revision: https://reviews.llvm.org/D61435
llvm-svn: 368024
