Due to the nature of the beat system in the MVE architecture, along with tail
predication and low-overhead loops, unrolling has less benefit compared to
normal loops. You can not, for example, hide the latency of a load with other
instructions as you can for scalar code. Preventing unrolling also makes the
code easier to read and reason about.
So if a loop contains vector code, don't enable the runtime unrolling. At least
for the time being.
Differential Revision: https://reviews.llvm.org/D65803
llvm-svn: 368530
With enough codegen complete, we can now correctly report the number and size
of vector registers for MVE, allowing auto vectorisation. This also allows FP
auto-vectorization for MVE without -Ofast/-ffast-math, due to support for IEEE
FP arithmetic and parity between scalar and vector FP behaviour.
Patch by David Sherwood.
Differential Revision: https://reviews.llvm.org/D63728
llvm-svn: 368529
Summary:
When exceptions are repeatedly thrown in the middle of handling another
exception, we call `__clang_call_terminate` with the exception pointer
(i32) as an argument. But in case of foreign exceptions, we don't have
the pointer, so we call the function with 0. (This requires
`__clang_call_terminate` can deal with 0 argument, which will be done
later)
But previously the 0 argument was not added as a `i32.const 0` but an
immediate by mistake, causing the `call` instruction to take not an i32
but rather an exnref, because an `exnref` is left on top of the value
stack if `br_on_exn` is not taken.
```
block i32
br_on_exn 0, __cpp_exception
;; exnref is on top of stack now
i32.const 0 ;; This was missing!
call __clang_call_terminate
unreachable
end
call __clang_call_terminate ;; This takes i32 extracted by br_on_exn
```
Reviewers: dschuff
Subscribers: sbc100, jgravelle-google, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65475
llvm-svn: 368527
Summary:
Hoisting/sinking instruction out of a loop isn't always beneficial. Hoisting an instruction from a cold block inside a loop body out of the loop could hurt performance. This change makes Loop ICM profile aware - it now checks block frequency to make sure hoisting/sinking anly moves instruction to colder block.
Test Plan:
ninja check
Reviewers: asbirlea, sanjoy, reames, nikic, hfinkel, vsk
Reviewed By: asbirlea
Subscribers: fhahn, vsk, davidxl, xbolva00, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65060
llvm-svn: 368526
The test case that changed is probably better served through
allowing combineTruncatedArithmetic to create narrow vectors. It
also appears InstCombine would have simplified this test case
to remove the zext and trunc anyway.
llvm-svn: 368522
If one of the values being shifted is a constant, since the new shift
amount is known-constant, the new shift will end up being constant-folded
so, we don't need that one-use restriction then.
llvm-svn: 368519
That one-use restriction is not needed for correctness - we have already
ensured that one of the shifts will go away, so we know we won't increase
the instruction count. So there is no need for that restriction.
llvm-svn: 368518
On SSE41+ targets we always lower vector shuffles to ZERO_EXTEND_VECTOR_INREG, even if we don't need the extended bits.
This patch relaxes this so that we lower to ANY_EXTEND_VECTOR_INREG if we can, meaning that shuffle combines have a better idea of what elements need to be kept zero. This helps the multiple reduction code as we can now combine away a lot more of the pack+extend codes.
Differential Revision: https://reviews.llvm.org/D65741
llvm-svn: 368515
This is an extension of a transform that tries to produce positive floating-point
constants to improve canonicalization (and hopefully lead to more reassociation
and CSE).
The original patches were:
D4904
D5363 (rL221721)
But as the test diffs show, these were limited to basic patterns by walking from
an instruction to its single user rather than recursively moving up the def-use
sequence. No fast-math is required here because we're only rearranging implicit
FP negations in intermediate ops.
A motivating bug is:
https://bugs.llvm.org/show_bug.cgi?id=32939
Differential Revision: https://reviews.llvm.org/D65954
llvm-svn: 368512
Summary:
In `block-placement` pass, it will create some patterns for unconditional we can do the simple early retrun.
But the `early-ret` pass is before `block-placement`, we don't want to run it again.
This patch is to do the simple early return to optimize the blocks at the last of `block-placement`.
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D63972
llvm-svn: 368509
Summary:
This patch adds a special DAG combine for SSE1 to recognize the IR pattern InstCombine gives us for movmsk. This only does the recognition for a few cases where its obvious the input won't be scalarized resulting in building a vector just do to the movmsk. I've made it separate from our existing matching for movmsk since that's called in multiple places and I didn't spend time to see if the other callers would make sense here. Plus the restrictions and additional checks would complicate that.
This fixes the case from PR42870. Buts its probably still broken the presence of logic ops feeding the movmsk pattern which would further hide the v4f32 type.
Reviewers: spatel, RKSimon, xbolva00
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65689
llvm-svn: 368506
Summary:
On windows if the frame size exceed 4096 bytes, compiler need to
generate a call to _alloca_probe. X86CallFrameOptimization pass
changes the reserved stack size and cause of stack probe function
not be inserted. This patch fix the issue by detecting the call
frame size, if the size exceed 4096 bytes, drop X86CallFrameOptimization.
Reviewers: craig.topper, wxiao3, annita.zhang, rnk, RKSimon
Reviewed By: rnk
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65923
llvm-svn: 368503
Introducing non-global control for default block-scan-limit in MemDep analysis.
Useful when there are many compilations per initialized LLVM instance (e.g. JIT).
Reviewed By: asbirlea
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65806
llvm-svn: 368502
The default behavior of Clang's indirect function call checker will replace
the address of each CFI-checked function in the output file's symbol table
with the address of a jump table entry which will pass CFI checks. We refer
to this as making the jump table `canonical`. This property allows code that
was not compiled with ``-fsanitize=cfi-icall`` to take a CFI-valid address
of a function, but it comes with a couple of caveats that are especially
relevant for users of cross-DSO CFI:
- There is a performance and code size overhead associated with each
exported function, because each such function must have an associated
jump table entry, which must be emitted even in the common case where the
function is never address-taken anywhere in the program, and must be used
even for direct calls between DSOs, in addition to the PLT overhead.
- There is no good way to take a CFI-valid address of a function written in
assembly or a language not supported by Clang. The reason is that the code
generator would need to insert a jump table in order to form a CFI-valid
address for assembly functions, but there is no way in general for the
code generator to determine the language of the function. This may be
possible with LTO in the intra-DSO case, but in the cross-DSO case the only
information available is the function declaration. One possible solution
is to add a C wrapper for each assembly function, but these wrappers can
present a significant maintenance burden for heavy users of assembly in
addition to adding runtime overhead.
For these reasons, we provide the option of making the jump table non-canonical
with the flag ``-fno-sanitize-cfi-canonical-jump-tables``. When the jump
table is made non-canonical, symbol table entries point directly to the
function body. Any instances of a function's address being taken in C will
be replaced with a jump table address.
This scheme does have its own caveats, however. It does end up breaking
function address equality more aggressively than the default behavior,
especially in cross-DSO mode which normally preserves function address
equality entirely.
Furthermore, it is occasionally necessary for code not compiled with
``-fsanitize=cfi-icall`` to take a function address that is valid
for CFI. For example, this is necessary when a function's address
is taken by assembly code and then called by CFI-checking C code. The
``__attribute__((cfi_jump_table_canonical))`` attribute may be used to make
the jump table entry of a specific function canonical so that the external
code will end up taking a address for the function that will pass CFI checks.
Fixes PR41972.
Differential Revision: https://reviews.llvm.org/D65629
llvm-svn: 368495
This is the codegen part of fixing:
https://bugs.llvm.org/show_bug.cgi?id=32939
Even with the optimal/canonical IR that is ideally created by D65954,
we would reverse that transform in DAGCombiner and end up with the same
asm on AArch64 or x86.
I see 2 options for trying to correct this:
1. Limit isNegatibleForFree() by special-casing the fmul pattern (this patch).
2. Avoid creating (fmul X, 2.0) in the 1st place by adding a special-case
transform to SelectionDAG::getNode() and/or SelectionDAGBuilder::visitFMul()
that matches the transform done by DAGCombiner.
This seems like the less intrusive patch, but if there's some other reason to
prefer 1 option over the other, we can change to the other option.
Differential Revision: https://reviews.llvm.org/D66016
llvm-svn: 368490
Summary:
Targets often have instructions that can sign-extend certain cases faster
than the equivalent shift-left/arithmetic-shift-right. Such cases can be
identified by matching a shift-left/shift-right pair but there are some
issues with this in the context of combines. For example, suppose you can
sign-extend 8-bit up to 32-bit with a target extend instruction.
%1:_(s32) = G_SHL %0:_(s32), i32 24 # (I've inlined the G_CONSTANT for brevity)
%2:_(s32) = G_ASHR %1:_(s32), i32 24
%3:_(s32) = G_ASHR %2:_(s32), i32 1
would reasonably combine to:
%1:_(s32) = G_SHL %0:_(s32), i32 24
%2:_(s32) = G_ASHR %1:_(s32), i32 25
which no longer matches the special case. If your shifts and extend are
equal cost, this would break even as a pair of shifts but if your shift is
more expensive than the extend then it's cheaper as:
%2:_(s32) = G_SEXT_INREG %0:_(s32), i32 8
%3:_(s32) = G_ASHR %2:_(s32), i32 1
It's possible to match the shift-pair in ISel and emit an extend and ashr.
However, this is far from the only way to break this shift pair and make
it hard to match the extends. Another example is that with the right
known-zeros, this:
%1:_(s32) = G_SHL %0:_(s32), i32 24
%2:_(s32) = G_ASHR %1:_(s32), i32 24
%3:_(s32) = G_MUL %2:_(s32), i32 2
can become:
%1:_(s32) = G_SHL %0:_(s32), i32 24
%2:_(s32) = G_ASHR %1:_(s32), i32 23
All upstream targets have been configured to lower it to the current
G_SHL,G_ASHR pair but will likely want to make it legal in some cases to
handle their faster cases.
To follow-up: Provide a way to legalize based on the constant. At the
moment, I'm thinking that the best way to achieve this is to provide the
MI in LegalityQuery but that opens the door to breaking core principles
of the legalizer (legality is not context sensitive). That said, it's
worth noting that looking at other instructions and acting on that
information doesn't violate this principle in itself. It's only a
violation if, at the end of legalization, a pass that checks legality
without being able to see the context would say an instruction might not be
legal. That's a fairly subtle distinction so to give a concrete example,
saying %2 in:
%1 = G_CONSTANT 16
%2 = G_SEXT_INREG %0, %1
is legal is in violation of that principle if the legality of %2 depends
on %1 being constant and/or being 16. However, legalizing to either:
%2 = G_SEXT_INREG %0, 16
or:
%1 = G_CONSTANT 16
%2:_(s32) = G_SHL %0, %1
%3:_(s32) = G_ASHR %2, %1
depending on whether %1 is constant and 16 does not violate that principle
since both outputs are genuinely legal.
Reviewers: bogner, aditya_nandakumar, volkan, aemerson, paquette, arsenm
Subscribers: sdardis, jvesely, wdng, nhaehnle, rovka, kristof.beyls, javed.absar, hiraditya, jrtc27, atanasyan, Petar.Avramovic, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D61289
llvm-svn: 368487
Summary:
A block address may be used in inline assembly. In which case it
requires a name so that the asm parser has something to parse. Creating
a name for every block address is a large hammer, but is necessary
because at the point when a temp symbol is created we don't necessarily
know if it's used in inline asm. This ensures that it exists regardless.
Reviewers: nickdesaulniers, craig.topper
Subscribers: nathanchance, javed.absar, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65352
llvm-svn: 368478
Summary:
This patch keeps track of MCSymbols created for blocks that were
referenced in inline asm. It prevents creating a new symbol which
doesn't refer to the block.
Inline asm may have a reference to a label. The asm parser however
doesn't recognize it as a label and tries to create a new symbol. The
result being that instead of the original symbol (e.g. ".Ltmp0") the
parser replaces it in the inline asm with the new one (e.g. ".Ltmp00")
without updating it in the symbol table. So the machine basic block
retains the "old" symbol (".Ltmp0"), but the inline asm uses the new one
(".Ltmp00").
Reviewers: nickdesaulniers, craig.topper
Subscribers: nathanchance, javed.absar, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65304
llvm-svn: 368477
Summary:
The problem:
When an operand had bits explicitly set to "1" (as in the InitValue.td test case attached), the decoder was ignoring those bits, and the DecoderMethod was receiving an input where the bits were still zero.
The solution:
We added an "InitValue" variable that stores the initial value of the operand based on what bits were explicitly initialized to 1 in TableGen code. The generated decoder code then uses that initial value to initialize the "tmp" variable, then calls fieldFromInstruction to read the values for the remaining bits that were left unknown in TableGen.
This is mainly useful when there are variations of an instruction that differ based on what bits are set in the operands, since this change makes it possible to access those bits in a DecoderMethod. The DecoderMethod can use those bits to know how to handle the input.
Patch by Nicolas Guillemot
Reviewers: craig.topper, dsanders, fhahn
Reviewed By: dsanders
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D63741
llvm-svn: 368458
Refactor `LibCallSimplifier::optimizeExp2()` to use the new
`emitBinaryFloatFnCall()` version that fetches the function name from TLI.
llvm-svn: 368457
For type values that do not have proper names, print reasonable representation
in llvm-nm, llvm-readobj and llvm-readelf, matching GNU tools.s
Fixes PR41713.
Differential Revision: https://reviews.llvm.org/D65537
llvm-svn: 368451
