It looks like currently the UBSan blacklist is only applied when "Undefined" is selected.
This patch updates the cmake file to apply it whenever Undefined is selected
(e.g. 'Address; Undefined' ). This allows us to use the workaround added in
rL335525 when using AddressSan and UBSan together.
Reviewers: eugenis, vitalybuka
Reviewed By: eugenis
Differential Revision: https://reviews.llvm.org/D49558
llvm-svn: 337539
As a consequence of recent discussions
(http://lists.llvm.org/pipermail/llvm-dev/2018-May/123164.html), this patch
changes the SystemZ SchedModels so that the IssueWidth is 6, which is the
decoder capacity, and NumMicroOps become the number of decoder slots needed
per instruction.
In addition, the SchedWrite latencies now match the MachineInstructions
def-operand indexes, and ReadAdvances have been added on instructions with
one register operand and one memory operand.
Review: Ulrich Weigand
https://reviews.llvm.org/D47008
llvm-svn: 337538
This patch adds the following instructions:
RBIT reverse bits within each active elemnt (predicated), e.g.
rbit z0.d, p0/m, z1.d
for 8, 16, 32 and 64 bit elements.
REV reverse order of elements in data/predicate vector
(unpredicated), e.g.
rev z0.d, z1.d
rev p0.d, p1.d
for 8, 16, 32 and 64 bit elements.
REVB reverse order of bytes within each active element, e.g.
revb z0.d, p0/m, z1.d
for 16, 32 and 64 bit elements.
REVH reverse order of 16-bit half-words within each active
element, e.g.
revh z0.d, p0/m, z1.d
for 32 and 64 bit elements.
REVW reverse order of 32-bit words within each active element,
e.g.
revw z0.d, p0/m, z1.d
for 64 bit elements.
llvm-svn: 337534
I'm optimistically reverting commit r337511, effectively reapplying
r337504 *without* changes.
The failing bots that had `SmallVector` in the backtrace recovered after
the unrelated commit r337508. The backtraces looked bogus anyway, with
`SmallVector::size()` calling (e.g.) `ConstantArray::get()`.
Here's the original commit message:
ADT: Shrink size of SmallVector by 8B on 64-bit platforms
Represent size and capacity directly as unsigned and calculate
`end()` using `begin() + size()`.
This limits the maximum size/capacity of a vector to UINT32_MAX.
https://reviews.llvm.org/D48518
llvm-svn: 337514
Summary:
lifetime2.C violates DR1696, which prevents reference members from being
initialized to temporaries, whose lifetime would end at the end of ctor.
Reviewers: sbc100
Subscribers: dschuff, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D49577
llvm-svn: 337512
remove dead declaration of a call instruction handling helper.
This moves to the 'harden' terminology that I've been trying to settle
on for returns. It also adds a really detailed comment explaining what
all we're trying to accomplish with return instructions and why.
Hopefully this makes it much more clear what exactly is being
"hardened".
Differential Revision: https://reviews.llvm.org/D49571
llvm-svn: 337510
It's more aggressive than we need to be, and leads to strange
workarounds in other places like call return value inference. Instead,
just directly mark an edge viable.
Tests by Florian Hahn.
Differential Revision: https://reviews.llvm.org/D49408
llvm-svn: 337507
Representing size and capacity directly as unsigned and calculate
`end()` using `begin() + size()`.
This limits the maximum size/capacity of a vector to UINT32_MAX.
https://reviews.llvm.org/D48518
llvm-svn: 337504
Summary:
Currently all type ids are emitted into the index file when it is
written. For distributed ThinLTO, that meant that all type ids were
being duplicated into every single distributed index file, regardless of
whether they were referenced, leading to huge amounts of unnecessary
duplication and size bloat.
Keep track of the type id GUIDs actually referenced by the GV summary
records being emitted, and only emit those type IDs.
Add a new test, and fix test/Assembler/thinlto-summary.ll so that all
type ids are referenced to prevent deletion in that test.
Reviewers: pcc
Subscribers: mehdi_amini, inglorion, eraman, steven_wu, dexonsmith, vitalybuka, llvm-commits
Differential Revision: https://reviews.llvm.org/D49565
llvm-svn: 337503
We have a number of cases where we fail to reduce vector op widths, performing the op in a larger vector and then extracting a subvector. This is often because by default it would create illegal types.
This peephole patch attempts to handle a few common cases detailed in PR36761, which typically involved extension+conversion to vX2f64 types.
Differential Revision: https://reviews.llvm.org/D49556
llvm-svn: 337500
For the most part, these changes were from the RFC. I made a few minor
word/structure changes, but nothing significant. I also regenerated the
example output, and adjusted the text accordingly.
Differential Revision: https://reviews.llvm.org/D49527
llvm-svn: 337496
This particular version of GCC seems to break bitfields when a method
appears between two bitfield members.
Personally, I think it's nice to keep bitfields close together so that
it's easy to check how things are packed, so I moved the method after
SubClassData.
Fixes PR38168.
llvm-svn: 337495
It fires on things like SmallVector<std::pair<int, int>>, where we
intentionally use memcpy instead of calling the assignment operator.
This warning fires in practically every LLVM TU, so we have to do
something about it, even if we aren't interested in being 100% warning
clean with GCC.
Reported as PR37337
llvm-svn: 337492
Returning SDValue() means nothing was changed. Returning the result of CombineTo returns the first argument of CombineTo. This is specially detected by DAGCombiner as meaning that something changed, but worklist management was already taken care of.
I think the only real effect of this change is that we now properly update the Statistic the counts the number of combines performed. That's the only thing between the check for null and the check for N in the DAGCombiner.
llvm-svn: 337491
This is mostly a preparation work for adding a limited support for
select instructions. It proved to be difficult to do due to size and
irregularity of Vectorizer::isConsecutiveAccess, this is fixed here I
believe.
It also turned out that these changes make it simpler to finish one of
the TODOs and fix a number of other small issues, namely:
1. Looking through bitcasts to a type of a different size (requires
careful tracking of the original load/store size and some math
converting sizes in bytes to expected differences in indices of GEPs).
2. Reusing partial analysis of pointers done by first attempt in proving
them consecutive instead of starting from scratch. This added limited
support for nested GEPs co-existing with difficult sext/zext
instructions. This also required a careful handling of negative
differences between constant parts of offsets.
3. Handing a case where the first pointer index is not an add, but
something else (a function parameter for instance).
I observe an increased number of successful vectorizations on a large
set of shader programs. Only few shaders are affected, but those that
are affected sport >5% less loads and stores than before the patch.
Reviewed By: rampitec
Differential-Revision: https://reviews.llvm.org/D49342
llvm-svn: 337489
As we already return true from needsAggressiveScheduling() for the most recent
hardware it would be cleaner to just return true for all PowerPC hardware.
Differential Revision: https://reviews.llvm.org/D48663
llvm-svn: 337488
Some trivial cases in udivrem were handled by directly assigning 0 or 1
to APInt objects. This would set the bit width to 1, instead of the bit
width of the inputs. A potentially undesirable side effect of that is
that with the bit width of 1, 1 equals -1.
Differential Revision: https://reviews.llvm.org/D49554
llvm-svn: 337478
Summary: Currently, isConsecutiveAccess() detects two pointers(PtrA and PtrB) as consecutive by
comparing PtrB with BaseDelta+PtrA. This works when both pointers are factorized or
both of them are not factorized. But isConsecutiveAccess() fails if one of the
pointers is factorized but the other one is not.
Here is an example:
PtrA = 4 * (A + B)
PtrB = 4 + 4A + 4B
This patch uses getMinusSCEV() to compute the distance between two pointers.
getMinusSCEV() allows combining the expressions and computing the simplified distance.
Author: FarhanaAleen
Reviewed By: rampitec
Differential Revision: https://reviews.llvm.org/D49516
llvm-svn: 337471
This patch fixes the latency/throughput of LEA instructions in the BtVer2
scheduling model.
On Jaguar, A 3-operands LEA has a latency of 2cy, and a reciprocal throughput of
1. That is because it uses one cycle of SAGU followed by 1cy of ALU1. An LEA
with a "Scale" operand is also slow, and it has the same latency profile as the
3-operands LEA. An LEA16r has a latency of 3cy, and a throughput of 0.5 (i.e.
RThrouhgput of 2.0).
This patch adds a new TIIPredicate named IsThreeOperandsLEAFn to X86Schedule.td.
The tablegen backend (for instruction-info) expands that definition into this
(file X86GenInstrInfo.inc):
```
static bool isThreeOperandsLEA(const MachineInstr &MI) {
return (
(
MI.getOpcode() == X86::LEA32r
|| MI.getOpcode() == X86::LEA64r
|| MI.getOpcode() == X86::LEA64_32r
|| MI.getOpcode() == X86::LEA16r
)
&& MI.getOperand(1).isReg()
&& MI.getOperand(1).getReg() != 0
&& MI.getOperand(3).isReg()
&& MI.getOperand(3).getReg() != 0
&& (
(
MI.getOperand(4).isImm()
&& MI.getOperand(4).getImm() != 0
)
|| (MI.getOperand(4).isGlobal())
)
);
}
```
A similar method is generated in the X86_MC namespace, and included into
X86MCTargetDesc.cpp (the declaration lives in X86MCTargetDesc.h).
Back to the BtVer2 scheduling model:
A new scheduling predicate named JSlowLEAPredicate now checks if either the
instruction is a three-operands LEA, or it is an LEA with a Scale value
different than 1.
A variant scheduling class uses that new predicate to correctly select the
appropriate latency profile.
Differential Revision: https://reviews.llvm.org/D49436
llvm-svn: 337469
When output style is GNU and amount of sections is >= SHN_LORESERVE,
llvm-readobj reports zero number of sections instead of actual value.
The patch fixes that.
Differential revision: https://reviews.llvm.org/D49544
llvm-svn: 337462
Summary:
Enable these passes for CFI and WPD in ThinLTO and LTO with the new pass
manager. Add a couple of tests for both PMs based on the clang tests
tools/clang/test/CodeGen/thinlto-distributed-cfi*.ll, but just test
through llvm-lto2 and not with distributed ThinLTO.
Reviewers: pcc
Subscribers: mehdi_amini, inglorion, eraman, steven_wu, dexonsmith, llvm-commits
Differential Revision: https://reviews.llvm.org/D49429
llvm-svn: 337461
We were emitting incorrect calls to libm functions that LLVM had decided it
knew about because the default is soft-float.
Recommitted without breaking ELF this time.
llvm-svn: 337450
Add some quick words for unroll and jam to the list of passes and add
unroll_and_jam metadata to the language ref.
Differential Revision: https://reviews.llvm.org/D49349
llvm-svn: 337448
changes that are intertwined here:
1) Extracting the tracing of predicate state through the CFG to its own
function.
2) Creating a struct to manage the predicate state used throughout the
pass.
Doing #1 necessitates and motivates the particular approach for #2 as
now the predicate management is spread across different functions
focused on different aspects of it. A number of simplifications then
fell out as a direct consequence.
I went with an Optional to make it more natural to construct the
MachineSSAUpdater object.
This is probably the single largest outstanding refactoring step I have.
Things get a bit more surgical from here. My current goal, beyond
generally making this maintainable long-term, is to implement several
improvements to how we do interprocedural tracking of predicate state.
But I don't want to do that until the predicate state management and
tracing is in reasonably clear state.
Differential Revision: https://reviews.llvm.org/D49427
llvm-svn: 337446
SCEV tries to constant-fold arguments of trunc operands in SCEVAddExpr, and when it does
that, it passes wrong flags into the recursion. It is only valid to pass flags that are proved for
narrow type into a computation in wider type if we can prove that trunc instruction doesn't
actually change the value. If it did lose some meaningful bits, we may end up proving wrong
no-wrap flags for sum of arguments of trunc.
In the provided test we end up with `nuw` where it shouldn't be because of this bug.
The solution is to conservatively pass `SCEV::FlagAnyWrap` which is always a valid thing to do.
Reviewed By: sanjoy
Differential Revision: https://reviews.llvm.org/D49471
llvm-svn: 337435
This prevents gold from printing a warning when trying to export
these symbols via the asan dynamic list after ThinLTO promotes them
from private symbols to external symbols with hidden visibility.
Differential Revision: https://reviews.llvm.org/D49498
llvm-svn: 337428
Summary:
The use of exception handling instructions should only be enabled with
`-mattr=+exception-handling` option.
Reviewers: jgravelle-google
Subscribers: dschuff, sbc100, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D49391
llvm-svn: 337425
