Previously this change was submitted from a Windows machine, so
changes made to the case of filenames and directory names did
not survive the commit, and as a result the CMake source file
names and the on-disk file names did not match on case-sensitive
file systems.
I'm resubmitting this patch from a Linux system, which hopefully
allows the case changes to make it through unfettered.
llvm-svn: 277213
In a previous patch, it was suggested to use all caps instead of
rolling caps for initialisms, so this patch changes everything
to do this.
llvm-svn: 277190
As mentioned in commit log for r276686 this next step is adding a new
method in the ArchiveMemberHeader class to get the full name that
does proper error checking, and can be use for error messages.
To do this the name of ArchiveMemberHeader::getName() is changed to
ArchiveMemberHeader::getRawName() to be consistent with
Archive::Child::getRawName(). Then the “new” method is the addition
of a new implementation of ArchiveMemberHeader::getName() which gets
the full name and provides proper error checking. Which is mostly a rewrite
of what was Archive::Child::getName() and cleaning up incorrect uses of
llvm_unreachable() in the code which were actually just cases of errors
in the input Archives.
Then Archive::Child::getName() is changed to return Expected<> and use
the new implementation of ArchiveMemberHeader::getName() .
Also needed to change Archive::getMemoryBufferRef() with these
changes to return Expected<> as well to propagate Errors up.
As well as changing Archive::isThinMember() to return Expected<> .
llvm-svn: 277177
Summary:
Depends on D22841
We now use a much simpler CFG simplification routine for bugpoint,
because SimplifyCFG is no longer a good match for what bugpoint wants
to do.
At the same time, to make sure we don't lose anything valuable it was doing,
SimplifyCFG is now run as a per-BB reduction pass.
With this and D22841 combined, bugpoint operates both much faster on
the large testcases i have, and reduces them to pretty much minimal
testcases (in one case, bugpoint used to leave about 6000 useless blocks, and
now it leaves 3 ...)
Reviewers: chandlerc, majnemer
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D22845
llvm-svn: 277063
This adds boilerplate code for all coroutine passes,
the passes are no-ops for now.
Also, a small test has been added to verify that passes execute in
the expected order or not at all if coroutine support is disabled.
Patch by Gor Nishanov!
Differential Revision: https://reviews.llvm.org/D22847
llvm-svn: 277033
This was a pure virtual base class whose purpose was to abstract
away the notion of how you retrieve the layout of a discontiguous
stream of blocks in an Msf file. This led to too many layers of
abstraction making it difficult to figure out what was going on
and extend things. Ultimately, a stream's layout is decided by
its length and the array of block numbers that it lives on. So
rather than have an abstract base class which can return this in
any number of ways, it's more straightforward to simply store them
as fields of a trivial struct, and also to give a more appropriate
name.
This patch does that. It renames IMsfStreamData to MsfStreamLayout,
and deletes the 2 concrete implementations, DirectoryStreamData
and IndexedStreamData. MsfStreamLayout is a trivial struct
with the necessary data.
llvm-svn: 277018
This fixes the highlighting for lines without any coverage segments. I
don't have a neat way of testing this yet, but am working on it.
llvm-svn: 276906
Summary:
Add a pass to bugpoint to make it transform conditional jumps into unconditional jumps.
Often, bugpoint generates output that has large numbers of br undef jumps, where
one side is dead.
What is happening is two fold:
1. It never tries to just pick a direction for the jump, and just see what happens
<<<< this patch
2. SimplifyCFG no longer is a good match for bugpoint's usecase. It
does too much.
Even things in SimplifyCFG, like removeUnreachableBlocks, go to great
lengths to transform undefined behavior into blocks and kill large
parts of the CFG. This is great for regular code, not so much for
bugpoint, which often generates UB on purpose (store undef is a great
example).
<<<< a followup patch that is coming, to move simplifycfg into a
separate reduction pass, and move the existing reduceCrashingBlocks
pass to use simpleSimplifyCFG.
Both of these patches significantly reduce the size and complexity of bugpoint
generated testcases.
Reviewers: chandlerc, majnemer
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D22841
llvm-svn: 276884
Summary:
To build llgo, you must currently ensure that llgo
is in the tools/llgo directory, due to a hard-coded
path in llvm-go.
To support the use of LLVM_EXTERNAL_LLGO_SOURCE_DIR,
we introduce a flag to llvm-go that enables the
caller to specify the paths to symlink in the
temporary $GOPATH.
Reviewers: pcc
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D21634
llvm-svn: 276829
This enables users to export coverage information as portable JSON for use by
analysis tools and storage in document based databases.
The export sub-command is invoked just like the others:
llvm-cov export -instr-profile path/to/foo.profdata path/to/foo.binary
The resulting JSON contains a list of files and functions. Every file object
contains a list of segments, expansions, and a summary of the file's region,
function, and line coverage. Every function object contains the function's name
and regions. There is also a total summary for the entire object file.
Changes since the initial commit (r276813):
- Fixed the regexes in the tests to handle Windows filepaths.
Patch by Eddie Hurtig!
Differential Revision: https://reviews.llvm.org/D22651
llvm-svn: 276818
This enables users to export coverage information as portable JSON for use by
analysis tools and storage in document based databases.
The export sub-command is invoked just like the others:
llvm-cov export -instr-profile path/to/foo.profdata path/to/foo.binary
The resulting JSON contains a list of files and functions. Every file object
contains a list of segments, expansions, and a summary of the file's region,
function, and line coverage. Every function object contains the function's name
and regions. There is also a total summary for the entire object file.
Patch by Eddie Hurtig!
Differential Revision: https://reviews.llvm.org/D22651
llvm-svn: 276813
Recent changes to Xcode have changed the structure of Xcode toolchains. This patch makes the xcode-toolchain goop construct a new-format Xcode toolchain that is compatible with Xcode 7.
The new format has a compatibility version key, so when a new format comes out we can support multiple formats in parallel.
llvm-svn: 276718
Some targets, notably AArch64 for ILP32, have different relocation encodings
based upon the ABI. This is an enabling change, so a future patch can use the
ABIName from MCTargetOptions to chose which relocations to use. Tested using
check-llvm.
The corresponding change to clang is in: http://reviews.llvm.org/D16538
Patch by: Joel Jones
Differential Revision: https://reviews.llvm.org/D16213
llvm-svn: 276654
This makes it easier to have the writable and readable PDB
interfaces share code since the read/write and write-only
interfaces now share a single allocator, you don't have to worry
about a builder building a read only interface and then having
the read-only interface's data become corrupt when the builder
goes out of scope. Now the allocator is specified explicitly
to all constructors, so all interfaces can share a single allocator
that is scoped appropriately.
llvm-svn: 276459
This provides a better layering of responsibilities among different
aspects of PDB writing code. Some of the MSF related code was
contained in CodeView, and some was in PDB prior to this. Further,
we were often saying PDB when we meant MSF, and the two are
actually independent of each other since in theory you can have
other types of data besides PDB data in an MSF. So, this patch
separates the MSF specific code into its own library, with no
dependencies on anything else, and DebugInfoCodeView and
DebugInfoPDB take dependencies on DebugInfoMsf.
llvm-svn: 276458
Summary:
In the distributed backend case, the ThinLink step and the final native
object link are separate processes. This can be problematic when archive
libraries are involved in the link (e.g. via --start-lib/--end-lib
pairs). The linker only includes objects from libraries when
there is a strong reference to them, and depending on the intervening
ThinLTO backend processes' importing/inlining, the strong references
may appear different in the two link steps. See D22356 and D22467
for two scenarios where this causes issues.
To ensure that the final link includes the same objects, this patch
adds support for an "=filename" form of the thinlto-index-only plugin
option, in which case objects gold included in the link are emitted to
the given filename. This should be used as input to the final link (e.g.
via the @filename option to gold), instead of listing all the objects
within --start-lib/--end-lib pairs again.
Note that the support for the gold callback that identifies included
objects was added in gold version 1.12.
Reviewers: davidxl, mehdi_amini
Subscribers: llvm-commits, mehdi_amini
Differential Revision: https://reviews.llvm.org/D22677
llvm-svn: 276450
This implements support for writing compiland and compiland source
file info to a binary PDB. This is tested by adding support for
dumping these fields from an existing PDB to yaml, reading them
back in, and dumping them again and verifying the values are as
expected.
llvm-svn: 276426
The llvm-cov ‘report' command displays a summary of the coverage of a binary file.
The summary report currently only includes covered regions and covered functions.
This patch adds the coverage of lines in the summary report.
Differential Revision: https://reviews.llvm.org/D22569
llvm-svn: 276409
This change adds a hasFileAtIndex method. getChildDeclContext can first call this method, and if it returns true it knows it can then lookup the resolved path cache for the given file index. If we hit that cache then we don't even have to call getFileNameByIndex.
Running dsymutil against the swift executable built from github gives a 20% performance improvement without any change in the binary.
Differential Revision: https://reviews.llvm.org/D22655
Reviewed by friss.
llvm-svn: 276380
This makes it easy to swap out the default stylesheet for a custom one.
It also shaves ~6.62 MB out of the report directory for a full coverage
build of llvm+clang.
While we're at it, prune the CSS and add tests for it.
llvm-svn: 276359
Previously LLVM_HAS_GLOBAL_ISEL would directly get the value of
LLVM_BUILD_GLOBAL_ISEL. This could be any integer value and not just ON
and OFF. The problem is that lit.cfg was checking for ON to define that
global-isel was supported, thus if we were setting
LLVM_BUILD_GLOBAL_ISEL with an integer value, say 1, this test would
fail whereas we do build global-isel and want to test it.
llvm-svn: 276307
This step builds on Lang Hames work to change Archive::child_iterator
for better interoperation with Error/Expected. Building on that it is now
possible to return an error message when the size field of an archive
contains non-decimal characters.
llvm-svn: 276025
Add a "-j" option to llvm-profdata to control the number of threads used.
Auto-detect NumThreads when it isn't specified, and avoid spawning threads when
they wouldn't be beneficial.
I tested this patch using a raw profile produced by clang (147MB). Here is the
time taken to merge 4 copies together on my laptop:
No thread pool: 112.87s user 5.92s system 97% cpu 2:01.08 total
With 2 threads: 134.99s user 26.54s system 164% cpu 1:33.31 total
Changes since the initial commit:
- When handling odd-length inputs, call ThreadPool::wait() before merging the
last profile. Should fix a race/off-by-one (see r275937).
Differential Revision: https://reviews.llvm.org/D22438
llvm-svn: 275938
Add a "-j" option to llvm-profdata to control the number of threads
used. Auto-detect NumThreads when it isn't specified, and avoid spawning
threads when they wouldn't be beneficial.
I tested this patch using a raw profile produced by clang (147MB). Here is the
time taken to merge 4 copies together on my laptop:
No thread pool: 112.87s user 5.92s system 97% cpu 2:01.08 total
With 2 threads: 134.99s user 26.54s system 164% cpu 1:33.31 total
Differential Revision: https://reviews.llvm.org/D22438
llvm-svn: 275921
This does not schedule any passes besides the ones necessary to
construct and print the machine function. This is useful to test .mir
file reading and printing.
Differential Revision: http://reviews.llvm.org/D22432
llvm-svn: 275664
