generated by the Autoconf/Makefile build system relocatable.
Previously the generated CMake files contained hardcoded paths which
prevented a binary installation from being relocated to a different
place in the file system. This problem was most noticeable in LLVM's
official binary releases which were completely unusable by a downstream
project trying to import the CMake targets.
Package maintainers who choose to modify the install location of the
CMake directory without using the ``PROJ_cmake`` Makefile variable
override will need to patch the generated``LLVMConfig.cmake`` so that
``LLVM_INSTALL_PREFIX`` and ``_LLVM_CMAKE_DIR`` variables are set
correctly.
llvm-svn: 241080
CMake files and should not be by both build systems and also the targets
were also installed by the CMake build system which they should not be.
The problem was that
- the CMake build of LLVM installs and exports the gtest library
targets. We should not being doing this, these are not part of LLVM.
- the Autoconf/Makefile build of LLVM still had gtest libraries in the
installed LLVMConfig.cmake.
These problems would cause problems for an external project because when
calling llvm_map_components_to_libnames(XXX all) ${XXX} would to contain
LLVM's internal gtest libraries.
llvm-svn: 240981
ctypes 0.3 and earlier contains an interface-definig bug:
its ptr_of_raw_address accepts Int64 and not Nativeint. ctypes 0.4
was not released during the 3.6 cycle, and because of that, LLVM 3.6
was released with ctypes 0.3 as a dependency, which now breaks
the build on modern ctypes.
Unbreak.
llvm-svn: 240882
Summary:
Finally, delete LLVM's parse_arguments() definition.
Second part of D10531.
This is dependent on http://reviews.llvm.org/D10529
Reviewers: pcc, beanz, chapuni
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D10531
llvm-svn: 240122
The cmake check for whether libatomic could be used had been
unconditionally setting the result to false. Which was somewhat
fortunate, because the prerequisite check for whether it was *needed*
was always claiming it was, even if it was not.
However, this made platforms where libatomic is actually necessary
fail to link.
Differential Revision: http://reviews.llvm.org/D10453
llvm-svn: 239819
- Who defines ${LLVM_SOURCE_DIR} ?
- Would windows_version_resource.rc be available in an *installed* llvm tree?
I suggest it may be installed in ${PREFIX}/share.
llvm-svn: 239703
This reinstates my commits r238740/r238741 which I reverted due to a failure
in the clang-cl selfhost tests on Windows. I've now fixed the issue in
clang-cl that caused the failure so hopefully all should be well now.
llvm-svn: 239612
OCaml doc builds fail without .cmi files, and .cmi files are collected
in ocaml_outputs. Therefore, make doc targets depend on ocaml_outputs as
well.
Fixes: https://llvm.org/bugs/show_bug.cgi?id=23777
Patch by Michał Górny <mgorny@gentoo.org>
llvm-svn: 239259
This embeds Windows version information into our executables and DLLs.
The most visible place to view this data is in the details tab of the file
properties window in Windows explorer.
Differential Revision: http://reviews.llvm.org/D7828
llvm-svn: 238740
Summary: Multi-configuration builds put their binaries into ${CMAKE_BINARY_DIR}/Release/bin/. The table-gen cross-compilation support needs to take that into account.
Reviewers: yaron.keren
Reviewed By: yaron.keren
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D10102
llvm-svn: 238592
I can't actually test this properly because uninstalling MSVC 2015 CTP 6
and reinstalling the 2015 RC takes hours. I can only verify that this
doesn't mess up MSVC 2013 and 2015 CTP 6 builds, which is what I've
done.
Should fix PR23513.
llvm-svn: 237743
The gold binary is not required to build the plugin. All that is
needed is for LLVM_BINUTILS_INCDIR to point to the directory
containing plugin-api.h.
llvm-svn: 235918
In CMake dependencies can be filenames or targets, and targets can't be filenames. The Ninja generator handles filename dependencies because it generates targets for every output file from a command. For example:
add_custom_command(OUTPUT foo.txt COMMAND touch foo.txt)
With the Ninja generator this generates a target foo.txt, but with the Makefile generator it doesn't. This is probably because Ninja explicitly requires these hard dependency ties, and Make just behaves oddly in general.
To fix this we need to make the tablegen actions depend on a target rather than a filename.
llvm-svn: 235732
This adds the following targets to cmake. These can be used to build and link only specific parts of a backend, instead of having to link the whole backend.
- AllTargetsAsmPrinters, AllTargetsAsmParsers, AllTargetsDescs, AllTargetsDisassemblers, AllTargetsInfos
A typical use for these is instead of linking ${LLVM_TARGETS_TO_BUILD}. This commit changes llvm-mc to show how to use the new targets.
Reviewed by Chris Bieneman.
llvm-svn: 235324
The CMake install command is defined as:
install(TARGETS targets... [EXPORT <export-name>]
[[ARCHIVE|LIBRARY|RUNTIME|FRAMEWORK|BUNDLE|
PRIVATE_HEADER|PUBLIC_HEADER|RESOURCE]
[DESTINATION <dir>]
[INCLUDES DESTINATION [<dir> ...]]
[PERMISSIONS permissions...]
[CONFIGURATIONS [Debug|Release|...]]
[COMPONENT <component>]
[OPTIONAL] [NAMELINK_ONLY|NAMELINK_SKIP]
] [...])
This means it can only take one parameter from the set of RUNTIME, LIBRARY, or ARCHIVE. If you set more than one of these it seems to gobble up the extra arguments and ignore the COMPONENT argument.
This adds a check to only set LIBRARY or ARCHIVE based on whether or not the library being built is shared.
llvm-svn: 235113
Certain versions of CMake specify /W3 as part of CMAKE_CXX_FLAGS
by default, before you do anything. Appending /W4 to the end of
this and using the Ninja generator results in
cl : Command line warning D9025 : overriding '/W3' with '/W4'.
It is not possible to suppress this since it is a command line
warning and not a compiler warning, so we must fix the command
line to contain only one value for /Wn.
llvm-svn: 234907
Unfortunately, on ELF there is not used attribute on the .o files,
so there is no easy way to keep the dump function alive.
If we are not gcing, we may as well produce non gcable files and
avoid the cost.
Linking a debug clang now takes 18.856225992 seconds, before it
took 21.206897447.
I will try avoiding --gc-sections -O3 on a followup patch.
llvm-svn: 234159
Added a new boolean CMake flag, LLVM_INSTALL_UTILS. When set,
the 'install' target will include in the bin directory the
utils binaries - e.g. FileCheck. This mirrors the autoconfig
behavior.
Test Plan:
Locally verified that utils binaries are copied when flag is set,
and not copied when flag is not set.
Reviewers: jfb, dschuff, beanz
Reviewed By: beanz
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D8587
Patch by Mircea Trofin
llvm-svn: 233385
Summary:
This patch is an attempt at making `DenseMapIterator`s "fail-fast".
Fail-fast iterators that have been invalidated due to insertion into
the host `DenseMap` deterministically trip an assert (in debug mode)
on access, instead of non-deterministically hitting memory corruption
issues.
Enabling fail-fast iterators breaks the LLVM C++ ABI, so they are
predicated on `LLVM_ENABLE_ABI_BREAKING_CHECKS`.
`LLVM_ENABLE_ABI_BREAKING_CHECKS` by default flips with
`LLVM_ENABLE_ASSERTS`, but can be clamped to ON or OFF using the CMake /
autoconf build system.
Reviewers: chandlerc, dexonsmith, rnk, zturner
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D8351
llvm-svn: 233310
Summary:
This change makes CMake scan for lit suites and generate a target for each lit test suite. The targets follow the format check-<project>-<suite path>.
For example:
check-llvm-unit - Runs the LLVM unit tests
check-llvm-codegen-arm - Runs the ARM codeine tests
Note: These targets are not generated during multi-configuration generators (i.e. Xcode and Visual Studio) because target clutter impacts UI usability.
* Also fixed a minor issue that Duncan pointed out to me I was passing the suite to lit twice
Reviewers: chandlerc
Subscribers: aemerson, llvm-commits
Differential Revision: http://reviews.llvm.org/D8380
llvm-svn: 233009
This works in a similar way to the gold plugin tests. We search for a compatible
linker on $PATH and use it to run tests against our just-built libLTO. To start
with, test the just added opt level functionality.
Differential Revision: http://reviews.llvm.org/D8472
llvm-svn: 232785
The dependencies for cross-built tablegen were a bit confused. This fixes that. The following dependencies are now enforced:
(1) Tablegen tasks depend on the native tablegen
(2) Native tablegen depends on the cross-compiled tablegen
Although the native tablegen doesn't actually require the cross tablegen, having this dependency forces the native tablegen to rebuild whenever the cross tablegen changes.
llvm-svn: 232730
NFC currently but required as a prerequisite for using
the Microsoft resource compiler in conjunction with
CMake's ninja generator, which knows how to filter flags
appropriately, but not definitions.
Differential Revision: http://reviews.llvm.org/D8188
llvm-svn: 232727
Summary:
This change makes CMake scan for lit suites and generate a target for each lit test suite. The targets follow the format check-<project>-<suite path>.
For example:
check-llvm-unit - Runs the LLVM unit tests
check-llvm-codegen-arm - Runs the ARM codeine tests
Note: These targets are not generated during multi-configuration generators (i.e. Xcode and Visual Studio) because target clutter impacts UI usability.
Reviewers: chandlerc
Subscribers: aemerson, llvm-commits
Differential Revision: http://reviews.llvm.org/D8380
llvm-svn: 232671
The MSVC linker won't produce a .lib file for an executable that doesn't
export anything, and LLVM doesn't maintain dllexport annotations or .def
files listing all C++ symbols. It also doesn't support exporting all
symbols, like binutils ld.
CMake 3.2 changed the Ninja generator to list both the .exe and .lib
files as outputs of executable build targets. Ninja would always re-link
executables with ENABLE_EXPORTS because the .lib output file was not
present, and therefore the target was out of date.
llvm-svn: 232662
* put most of the cross-compiling support into a function llvm_create_cross_target_internal.
* when CrossCompile is included it still generates a NATIVE target.
* llvm_create_cross_target function takes a target_name which should match a toolchain.
* llvm_create_cross_target can now be used to target more than one cross-compilation target.
llvm-svn: 232067
* There is no reason to require SDKROOT as an environment variable because we can derive it from xcrun
* Setting CMAKE_RANLIB makes our static archives usable
llvm-svn: 232053
NFC currently but required as a prerequisite for using
the Microsoft resource compiler in conjunction with
CMake's ninja generator, which knows how to filter flags
appropriately, but not definitions.
Differential Revision: http://reviews.llvm.org/D8188
llvm-svn: 231924
Summary: This change leverages the cross-compiling functionality in the build system to build a release tablegen executable for use during the build.
Reviewers: resistor, rnk
Reviewed By: rnk
Subscribers: rnk, joker.eph, llvm-commits
Differential Revision: http://reviews.llvm.org/D7349
llvm-svn: 231842
libc++. This lets me almost self-host on Linux with libc++ and libc++abi
very simply.
Currently, MCJIT and OrcJIT are failing due to uncaught exceptions, and
the Go binding tests are failing to build due to not linking in the
correct C++ standard library.
llvm-svn: 231560
Introduce -mllvm -sanitizer-coverage-8bit-counters=1
which adds imprecise thread-unfriendly 8-bit coverage counters.
The run-time library maps these 8-bit counters to 8-bit bitsets in the same way
AFL (http://lcamtuf.coredump.cx/afl/technical_details.txt) does:
counter values are divided into 8 ranges and based on the counter
value one of the bits in the bitset is set.
The AFL ranges are used here: 1, 2, 3, 4-7, 8-15, 16-31, 32-127, 128+.
These counters provide a search heuristic for single-threaded
coverage-guided fuzzers, we do not expect them to be useful for other purposes.
Depending on the value of -fsanitize-coverage=[123] flag,
these counters will be added to the function entry blocks (=1),
every basic block (=2), or every edge (=3).
Use these counters as an optional search heuristic in the Fuzzer library.
Add a test where this heuristic is critical.
llvm-svn: 231166
This allows clang-cl to self-host cleanly with no magic setup
steps required.
After this patch, all you have to do is set CC=CXX=clang-cl and
run cmake -G Ninja.
These changes only exist to support C++ features which are
unsupported in clang-cl, so regardless of whether the user
specifies they want to use them, we still have to disable them.
llvm-svn: 230539
It is possible for the atomic routines to be provided by the compiler without
requiring any additional libraries. Check if that is the case before checking
for a library.
Patch by Matt Glazar!
llvm-svn: 230452
This reverts commit r230062.
Debian stable (wheezy) ships still with cmake 2.8.9.
The commit broke my LLVM/Polly buildbot, to my knowledge our only Linux+cmake
buildbot.
llvm-svn: 230343
If we're using clang-cl, that's a pretty good indication that we're
going to use MSVC's STL.
This simplifies the clang-cl ninja self-host configuration down to:
CC=clang-cl CXX=clang-cl cmake .. -GNinja
Modified version of zturner's patch:
Differential Revision: http://reviews.llvm.org/D7824
llvm-svn: 230239
NOTE: This patch intentionally breaks the build. It attempts
to resubmit r230083, but with some debug logging in the CMake
and lit config files to determine why certain bots do not
correctly disable the DIA tests when DIA is not available.
After a sufficient number of bots fail, this patch will either
be reverted or, if the cause of the failure becomes obvious,
a fix submitted with the log statements removed.
llvm-svn: 230161
Summary:
* add_llvm_tool and add_llvm_library now add install-${name} targets to install specific components
* added installhdrs target to install just the LLVM headers
* The above changes only apply for single-configuration generators (Ninja, Makefiles...), not for multi-configuration generators (Visual Studio, Xcode...)
Reviewers: pete
Reviewed By: pete
Subscribers: pete, llvm-commits
Differential Revision: http://reviews.llvm.org/D7619
llvm-svn: 229727
Previous versions of MSVC 2013 would miscompile ASTMatchers (and/or their
tests). Bump up the requirement and make sure we know about the minor
revision.
Minimum required version found by Michael Edwards!
llvm-svn: 229584
a gold binary explicitly. Substitute this binary into the tests rather
than just directly executing the 'ld' binary.
This should allow folks to inject a cross compiling gold binary, or in
my case to use a gold binary built and installed somewhere other than
/usr/bin/ld. It should also allow the tests to find 'ld.gold' so that
things work even if gold isn't the default on the system.
I've only stubbed out support in the makefile to preserve the existing
behavior with none of the fancy logic. If someone else wants to add
logic here, they're welcome to do so.
llvm-svn: 229251
Since header files are not compilation units, CMake does not require
you to specify them in the CMakeLists.txt file. As a result, unless a
header file is explicitly added, CMake won't know about it, and when
generating IDE-based projects, CMake won't put the header files into
the IDE project. LLVM currently tries to deal with this in two ways:
1) It looks for all .h files that are in the project directory, and
adds those.
2) llvm_add_library() understands the ADDITIONAL_HEADERS argument,
which allows one to list an arbitrary list of headers.
This patch takes things one step further. It adds the ability for
llvm_add_library() to take an ADDITIONAL_HEADER_DIRS argument, which
will specify a list of folders which CMake will glob for header files.
Furthermore, it will glob not only for .h files, but also for .inc
files.
Included in this CL is an update to one of the existing users of
ADDITIONAL_HEADERS to use this new argument instead, to serve as an
illustration of how this cleans up the CMake.
The big advantage of this new approach is that until now, there was no
way for the IDE projects to locate the header files that are in the
include tree. In other words, if you are in, for example,
lib/DebugInfo/DWARF, the corresponding includes for this project will
be located under include/llvm/DebugInfo/DWARF. Now, in the
CMakeLists.txt for lib/DebugInfo/DWARF, you can simply write:
ADDITIONAL_HEADER_DIRS
../../include/llvm/DebugInfo/DWARF
as an argument to llvm_add_library(), and all header files will get
added to the IDE project.
Differential Revision: http://reviews.llvm.org/D7460
Reviewed By: Chris Bieneman
llvm-svn: 228670
This allows all CMake projects, as well as C++ code, to detect if
and when DIA SDK is available for use so that we can enable the
DIA-based PDB reader implementation.
Differential Revision: http://reviews.llvm.org/D7457
Reviewed By: Chandler Carruth
llvm-svn: 228669
Summary:
Handle LLVM_USE_SANITIZER=Address;Undefined to enable ASan and UBSan
If UBSan is compatible with more of the other sanitizers, maybe we should
deal with this in a better way where we allow combining UBSan with any of
the other sanitizers.
Reviewers: samsonov
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D7024
llvm-svn: 228219
This was added in r188351 to fix a naming conflict between the
profile_rt-static and profile_rt-shared who both ended up in
lib/profile_rt.lib.
The change also affected other libraries (like libclang), and
users are reporting that they find it surprising that there's
no longer a libclang.lib. Since the profile_rt naming conflict
doesn't seem to exist any more, I think we can remove this.
Differential Revision: http://reviews.llvm.org/D7391
llvm-svn: 228049
Summary:
When LLVM_USE_SANITIZE_COVERAGE=YES
and one of the sanitizers is used -fsanitize-coverage=3 will be added
to build flag. This will be used to run a coverage-guided fuzzer on various
llvm libraries.
Test Plan: n/a
Reviewers: rnk
Reviewed By: rnk
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D7116
llvm-svn: 227216
ELF linkers by default allow shared libraries to contain undefined references
and it is up to the dynamic linker to look for them.
On COFF and MachO, that is not the case.
This creates a situation where a .so might build on an ELF system, but the build
of the corresponding .dylib or .dll will fail.
This patch changes the cmake build to use -Wl,-z,defs when linking and updates
the dependencies so that -DBUILD_SHARED_LIBS=ON build still works.
llvm-svn: 226611
As a result, installations of LLVM in non-standard locations
will not require passing custom -ccopt -L flags when building
the binary, nor absolute paths would be embedded in the cma/cmxa
files. Additionally, the executables will not require changes
to LD_LIBRARY_PATH, although CAML_LD_LIBRARY_PATH still
has to be set for ocamlc without -custom.
See http://caml.inria.fr/mantis/view.php?id=6642.
Note that the patch is approved, but not merged yet.
It will be released in 4.03 and likely 4.02.
llvm-svn: 225778
Add the missing `DEPENDS` keyword. r225319 did almost the right thing
(I didn't notice the problem with it because `Kaleidoscope-Ch8` wasn't
building at all).
llvm-svn: 225321
Summary:
This in turn allows us to use #includes with cgo that rely on CMake
provided include directories which is particularly useful for handling
generated headers that aren't reasonable to put in an "installable"
location.
Differential Revision: http://reviews.llvm.org/D6798
llvm-svn: 224962
that is used by other projects to build against LLVM. This will allow
subsequent patches to them to use LLVM_LIBDIR_SUFFIX, both when built as
part of the larger LLVM build an as part of a standalone build against
an installed set of LLVM libraries.
llvm-svn: 224920
*numerous* places where it was missing in the CMake build. The primary
change here is that the suffix is now actually used for all of the lib
directories in the LLVM project's CMake. The various subprojects still
need similar treatment.
This is the first of a series of commits to try to make LLVM's cmake
effective in a multilib Linux installation. I don't think many people
are seriously using this variable so I'm hoping the fallout will be
minimal. A somewhat unfortunate consequence of the nature of these
commits is that until I land all of them, they will in part make the
brokenness of our multilib support more apparant. At the end, things
should actually work.
llvm-svn: 224919
The algorithm for sorting libraries in topological order, as
previously implemented, had a few issues:
* It didn't make any sense.
* It didn't actually sort libraries in topological order.
* It hung on some inputs, e.g. "LLVMipo".
This commit replaces the old algorithm with a straightforward port
from llvm-config.cpp.
llvm-svn: 224554
This lets the queries work on Windows as well as Linux.
This does mean make and cmake aren't using the same scripts to do the
queries (again), but at least GetSVN.cmake understands git and git-svn
as well as svn now.
llvm-svn: 223425
Presumably it was added to the CMake system when MAXPATHLEN was still
used by code built for Windows. Currently only lib/Support/Path.inc uses
MAXPATHLEN, and it should be available on all Unices.
llvm-svn: 223139
This allows the logic to work with Git, and also uses the variable names
to match what Clang is actually looking for.
This is a re-application of r190556 and r190808. This changes the interface
of GetSVN.cmake. Clang change to follow.
llvm-svn: 222391
Summary: This will help in testing libc++ and libc++abi with tsan.
Reviewers: samsonov
Reviewed By: samsonov
Subscribers: samsonov, llvm-commits
Differential Revision: http://reviews.llvm.org/D6283
llvm-svn: 222258
A shared library (unlike a .a), has its dependencies recorded in the library and
we can pass PRIVATE to target_link_libraries.
This patch then removes some bogus dependencies when using
BUILD_SHARED_LIBS=ON. For example, we go from
build lib/CodeGen/CMakeFiles/LLVMCodeGen.dir/AggressiveAntiDepBreaker.cpp.o:
CXX_COMPILER /home/espindola/llvm/llvm/lib/CodeGen/AggressiveAntiDepBreaker.cpp
|| include/llvm/IR/intrinsics_gen lib/libLLVMSupport.so
lib/libLLVMCore.so lib/libLLVMBitReader.so
lib/libLLVMTransformUtils.so lib/libLLVMInstCombine.so
lib/libLLVMScalarOpts.so lib/libLLVMipa.so lib/libLLVMAnalysis.so
lib/libLLVMMCParser.so lib/libLLVMMC.so lib/libLLVMObject.so
lib/libLLVMTarget.so lib/libLLVMProfileData.so
to
build lib/CodeGen/CMakeFiles/LLVMCodeGen.dir/AggressiveAntiDepBreaker.cpp.o:
CXX_COMPILER /home/espindola/llvm/llvm/lib/CodeGen/AggressiveAntiDepBreaker.cpp
|| include/llvm/IR/intrinsics_gen lib/libLLVMSupport.so
lib/libLLVMCore.so lib/libLLVMTransformUtils.so
lib/libLLVMScalarOpts.so lib/libLLVMAnalysis.so lib/libLLVMMC.so
lib/libLLVMTarget.so
In fact, build.ninja goes from 5231028 bytes to 4896759 bytes.
With this, old verisons of bfd ld (2.24 is OK, 2.23 warns) will print a bogus
warning when building with BUILD_SHARED_LIBS.
llvm-svn: 221530
IMO we need to clean up some of these, but the member variable one
(C4458) has false positives on static methods. It is currently firing
on Twine, which has a static method like:
struct Twine {
uintptr_t LHS, RHS;
static void staticMethod() {
// warning C4458: declaration of 'LHS' hides class member
uintptr_t LHS;
...
}
};
We should fix up clang's -Wshadow and clean it up, and then we can
re-enable some of these MSVC warnings.
llvm-svn: 221012
Summary: This is a fix for the command line syntax error while building LTO when using MinGW.
Patch By: jsroemer
Reviewers: rnk
Reviewed By: rnk
Subscribers: rnk, beanz, llvm-commits
Differential Revision: http://reviews.llvm.org/D5476
llvm-svn: 220935
On FreeBSD 10.0, size_t needs to be defined before including cxxabi.h.
Currenty HAVE_CXXABI_H is not defined on FreeBSD because of that reason.
This patch teaches cmake and configure how to include it.
http://reviews.llvm.org/D5940
llvm-svn: 220665
This tool lets us build LLVM components within the tree by setting up a
$GOPATH that resembles a tree fetched in the normal way with "go get".
It is intended that components such as the Go frontend will be built in-tree
using this tool.
Differential Revision: http://reviews.llvm.org/D5902
llvm-svn: 220462
This would cause the flag to appear in the output of "llvm-config --cppflags",
which should contain only preprocessor flags. The -gsplit-dwarf flag in
particular can cause problems with certain downstream users such as cgo.
Differential Revision: http://reviews.llvm.org/D5895
llvm-svn: 220410
the CGO build environment. This lets things like -rpath propagate down
to the C++ code that is built along side the Go bindings when testing
them.
Patch by Peter Collingbourne, and verified that it works by me.
llvm-svn: 220252
It dropped required functions for plugins with gnu ld 2.20 and 2.21.
Failing Tests (1):
LLVM :: Feature/load_module.ll
Hello: bin/opt: symbol lookup error: lib/LLVMHello.so: undefined symbol: _ZN4llvm11raw_ostream13write_escapedENS_9StringRefEb
Failing Tests (1):
Clang :: Frontend/plugins.c
error: unable to load plugin 'lib/PrintFunctionNames.so': 'lib/PrintFunctionNames.so: undefined symbol: _ZN5clang15PluginASTAction6anchorEv'
I think we should inspect linker's version or behavior to introduce --gc-sections for --export-dynamic.
llvm-svn: 220198
This code is based on the existing LLVM Go bindings project hosted at:
https://github.com/go-llvm/llvm
Note that all contributors to the gollvm project have agreed to relicense
their changes under the LLVM license and submit them to the LLVM project.
Differential Revision: http://reviews.llvm.org/D5684
llvm-svn: 219976
In fact, symbolization is now expected to work only on Linux and
FreeBSD/NetBSD, where we have dl_iterate_phdr and can learn the
main executable name without argv0 (it will be possible on BSD systems
after http://reviews.llvm.org/D5693 lands). #ifdef-out the code for
all the rest Unix systems.
Reviewed in http://reviews.llvm.org/D5610
llvm-svn: 219534
This change modifies fatal signal handler used in LLVM tools.
Now it attempts to find llvm-symbolizer binary and communicates
with it in order to turn instruction addresses into
function/file/line info entries. This should significantly improve
stack traces readability in Debug builds.
This feature only works on selected platforms (including Darwin
and Linux). If the symbolization fails for some reason, signal
handler will fallback to the original behavior.
Reviewed in http://reviews.llvm.org/D5610
llvm-svn: 219354
lldb sets the variable SHARED_LIBRARY to 1, which breaks this conditional,
because older versions of CMake interpret
if ("${t}" STREQUAL "SHARED_LIBRARY")
as meaning
if ("${t}" STREQUAL "1")
in this case. Change the conditional so it does the right thing with both old
and new CMakes.
llvm-svn: 218542
