Currently if you use -{start,stop}-{before,after}, it picks
the first instance with the matching pass name. If you run
the same pass multiple times, there's no way to distinguish them.
Allow specifying a run index wih ,N to specify which you mean.
llvm-svn: 348285
D47882, D48130 and D48131 introduce a new lowering strategy for part-word
atomicrmw/cmpxchg and uses it to lower these operations for the RISC-V target.
Rather than having AtomicExpandPass produce the LL/SC loop in the IR level, it
instead calculates the necessary mask values and inserts a target-specific
intrinsic, which is lowered at a much later stage (after register allocation).
This ensures that architecture-specific restrictions for forward-progress in
LL/SC loops can be guaranteed.
This patch documents this new AtomicExpandPass functionality. See the previous
llvm-dev RFC for more info
<http://lists.llvm.org/pipermail/llvm-dev/2018-June/123993.html>.
Differential Revision: https://reviews.llvm.org/D52234
llvm-svn: 347971
Summary:
Resubmit this with no changes because I think the build was broken
by a different diff.
-----
The prior diff had to be reverted because there were two tests
that failed. I updated the two tests in this diff
clang/test/Misc/pragma-attribute-supported-attributes-list.test
clang/test/SemaCXX/attr-speculative-load-hardening.cpp
----- Summary from Previous Diff (Still Accurate) -----
LLVM IR already has an attribute for speculative_load_hardening. Before
this commit, when a user passed the -mspeculative-load-hardening flag to
Clang, every function would have this attribute added to it. This Clang
attribute will allow users to opt into SLH on a function by function basis.
This can be applied to functions and Objective C methods.
Reviewers: chandlerc, echristo, kristof.beyls, aaron.ballman
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D54915
llvm-svn: 347701
until I figure out why the build is failing or timing out
***************************
Summary:
The prior diff had to be reverted because there were two tests
that failed. I updated the two tests in this diff
clang/test/Misc/pragma-attribute-supported-attributes-list.test
clang/test/SemaCXX/attr-speculative-load-hardening.cpp
LLVM IR already has an attribute for speculative_load_hardening. Before
this commit, when a user passed the -mspeculative-load-hardening flag to
Clang, every function would have this attribute added to it. This Clang
attribute will allow users to opt into SLH on a function by function
basis.
This can be applied to functions and Objective C methods.
Reviewers: chandlerc, echristo, kristof.beyls, aaron.ballman
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D54915
This reverts commit a5b3c232d1e3613f23efbc3960f8e23ea70f2a79.
(r347617)
llvm-svn: 347628
Summary:
The prior diff had to be reverted because there were two tests
that failed. I updated the two tests in this diff
clang/test/Misc/pragma-attribute-supported-attributes-list.test
clang/test/SemaCXX/attr-speculative-load-hardening.cpp
----- Summary from Previous Diff (Still Accurate) -----
LLVM IR already has an attribute for speculative_load_hardening. Before
this commit, when a user passed the -mspeculative-load-hardening flag to
Clang, every function would have this attribute added to it. This Clang
attribute will allow users to opt into SLH on a function by function basis.
This can be applied to functions and Objective C methods.
Reviewers: chandlerc, echristo, kristof.beyls, aaron.ballman
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D54915
llvm-svn: 347617
Summary:
Basic documentation of the Stack Safety Analysis.
It will be improved during review and upstream of an implementation.
Reviewers: kcc, eugenis, vlad.tsyrklevich, glider
Reviewed By: vlad.tsyrklevich
Subscribers: arphaman, llvm-commits
Differential Revision: https://reviews.llvm.org/D53336
llvm-svn: 347612
Summary:
LLVM IR already has an attribute for speculative_load_hardening. Before
this commit, when a user passed the -mspeculative-load-hardening flag to
Clang, every function would have this attribute added to it. This Clang
attribute will allow users to opt into SLH on a function by function basis.
This can be applied to functions and Objective C methods.
Reviewers: chandlerc, echristo
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D54555
llvm-svn: 347586
RetireControlUnitStatistics now reports extra information about the ROB and the
avg/maximum number of entries consumed over the entire simulation.
Example:
Retire Control Unit - number of cycles where we saw N instructions retired:
[# retired], [# cycles]
0, 109 (17.9%)
1, 102 (16.7%)
2, 399 (65.4%)
Total ROB Entries: 64
Max Used ROB Entries: 35 ( 54.7% )
Average Used ROB Entries per cy: 32 ( 50.0% )
Documentation in llvm/docs/CommandGuide/llvmn-mca.rst has been updated to
reflect this change.
llvm-svn: 347493
* Add amdhsa prefix to names to allow other tools to use the metadata
without collision.
* Make names consistent.
* Simplify structure.
* Change note record ID.
* Switch from YAML to MsgPack format.
* Document metadata assembler directive.
Patch By: t-tye (Tony Tye)
Differential Revision: https://reviews.llvm.org/D53445
llvm-svn: 346992
A call to @llvm.trap can be expected to be cold (i.e. unlikely to be
reached in a normal program execution).
Outlining paths which unconditionally trap is an important memory
saving. As the hot/cold splitting pass (imho) should not treat all
noreturn calls as cold, explicitly mark @llvm.trap cold so that it can
be outlined.
Split out of https://reviews.llvm.org/D54244.
Differential Revision: https://reviews.llvm.org/D54329
llvm-svn: 346885
In some cases it is desirable to match the same pattern repeatedly
many times. Currently the only way to do it is to copy the same
check pattern as many times as needed. And that gets pretty unwieldy
when its more than count is big.
Introducing CHECK-COUNT-<num> directive which acts like a plain CHECK
directive yet matches the same pattern exactly <num> times.
Extended FileCheckType to a struct to add Count there.
Changed some parsing routines to handle non-fixed length of directive
(all currently existing directives were fixed-length).
The code is generic enough to allow future support for COUNT in more
than just PlainCheck directives.
See motivating example for this feature in reviews.llvm.org/D54223.
Reviewed By: chandlerc, dblaikie
Differential Revision: https://reviews.llvm.org/D54336
llvm-svn: 346722
Summary:
lcov tracefiles are used by various coverage reporting tools and build
systems (e.g., Bazel). It is a simple text-based format to parse and
more convenient to use than the JSON export format, which needs
additional processing to map regions/segments back to line numbers.
It's a little unfortunate that "text" format is now overloaded to refer
specifically to JSON for export, but I wanted to avoid making any
breaking changes to the UI of the llvm-cov tool at this time.
Patch by Tony Allevato (@allevato).
Reviewers: Dor1s, vsk
Reviewed By: Dor1s, vsk
Subscribers: mgorny, llvm-commits
Differential Revision: https://reviews.llvm.org/D54266
llvm-svn: 346506
This adds the llvm-side support for post-inlining evaluation of the
__builtin_constant_p GCC intrinsic.
Also fixed SCCPSolver::visitCallSite to not blow up when seeing a call
to a function where canConstantFoldTo returns true, and one of the
arguments is a struct.
Updated from patch initially by Janusz Sobczak.
Differential Revision: https://reviews.llvm.org/D4276
llvm-svn: 346322
Document what is expected during:
* triaging
* actively working on a bug
* closing/resolving
Also document how we maintain:
* product/component breakdown
* default-cc lists per component
Differential Revision: https://reviews.llvm.org/D53691
llvm-svn: 346299
This feature makes it easy to tune FileCheck diagnostic output when
running the test suite via ninja, a bot, or an IDE. For example:
```
$ FILECHECK_OPTS='-color -v -dump-input-on-failure' \
LIT_FILTER='OpenMP/for_codegen.cpp' ninja check-clang \
| less -R
```
Reviewed By: probinson
Differential Revision: https://reviews.llvm.org/D53517
llvm-svn: 346272
